summaryrefslogtreecommitdiffstats
path: root/arch/arm/plat-omap/dma.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/plat-omap/dma.c')
-rw-r--r--arch/arm/plat-omap/dma.c84
1 files changed, 65 insertions, 19 deletions
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 5dac4230360d..c5d0214ef191 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -43,6 +43,7 @@
#define OMAP_DMA_ACTIVE 0x01
#define OMAP_DMA_CCR_EN (1 << 7)
+#define OMAP2_DMA_CSR_CLEAR_MASK 0xffe
#define OMAP_FUNC_MUX_ARM_BASE (0xfffe1000 + 0xec)
@@ -166,18 +167,24 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
if (cpu_is_omap24xx() && dma_trigger) {
u32 val = OMAP_DMA_CCR_REG(lch);
+ val &= ~(3 << 19);
if (dma_trigger > 63)
val |= 1 << 20;
if (dma_trigger > 31)
val |= 1 << 19;
+ val &= ~(0x1f);
val |= (dma_trigger & 0x1f);
if (sync_mode & OMAP_DMA_SYNC_FRAME)
val |= 1 << 5;
+ else
+ val &= ~(1 << 5);
if (sync_mode & OMAP_DMA_SYNC_BLOCK)
val |= 1 << 18;
+ else
+ val &= ~(1 << 18);
if (src_or_dst_synch)
val |= 1 << 24; /* source synch */
@@ -286,22 +293,39 @@ void omap_set_dma_src_data_pack(int lch, int enable)
void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
{
+ unsigned int burst = 0;
OMAP_DMA_CSDP_REG(lch) &= ~(0x03 << 7);
switch (burst_mode) {
case OMAP_DMA_DATA_BURST_DIS:
break;
case OMAP_DMA_DATA_BURST_4:
- OMAP_DMA_CSDP_REG(lch) |= (0x02 << 7);
+ if (cpu_is_omap24xx())
+ burst = 0x1;
+ else
+ burst = 0x2;
break;
case OMAP_DMA_DATA_BURST_8:
- /* not supported by current hardware
+ if (cpu_is_omap24xx()) {
+ burst = 0x2;
+ break;
+ }
+ /* not supported by current hardware on OMAP1
* w |= (0x03 << 7);
* fall through
*/
+ case OMAP_DMA_DATA_BURST_16:
+ if (cpu_is_omap24xx()) {
+ burst = 0x3;
+ break;
+ }
+ /* OMAP1 don't support burst 16
+ * fall through
+ */
default:
BUG();
}
+ OMAP_DMA_CSDP_REG(lch) |= (burst << 7);
}
/* Note that dest_port is only for OMAP1 */
@@ -348,30 +372,49 @@ void omap_set_dma_dest_data_pack(int lch, int enable)
void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
{
+ unsigned int burst = 0;
OMAP_DMA_CSDP_REG(lch) &= ~(0x03 << 14);
switch (burst_mode) {
case OMAP_DMA_DATA_BURST_DIS:
break;
case OMAP_DMA_DATA_BURST_4:
- OMAP_DMA_CSDP_REG(lch) |= (0x02 << 14);
+ if (cpu_is_omap24xx())
+ burst = 0x1;
+ else
+ burst = 0x2;
break;
case OMAP_DMA_DATA_BURST_8:
- OMAP_DMA_CSDP_REG(lch) |= (0x03 << 14);
+ if (cpu_is_omap24xx())
+ burst = 0x2;
+ else
+ burst = 0x3;
break;
+ case OMAP_DMA_DATA_BURST_16:
+ if (cpu_is_omap24xx()) {
+ burst = 0x3;
+ break;
+ }
+ /* OMAP1 don't support burst 16
+ * fall through
+ */
default:
printk(KERN_ERR "Invalid DMA burst mode\n");
BUG();
return;
}
+ OMAP_DMA_CSDP_REG(lch) |= (burst << 14);
}
static inline void omap_enable_channel_irq(int lch)
{
u32 status;
- /* Read CSR to make sure it's cleared. */
- status = OMAP_DMA_CSR_REG(lch);
+ /* Clear CSR */
+ if (cpu_class_is_omap1())
+ status = OMAP_DMA_CSR_REG(lch);
+ else if (cpu_is_omap24xx())
+ OMAP_DMA_CSR_REG(lch) = OMAP2_DMA_CSR_CLEAR_MASK;
/* Enable some nice interrupts. */
OMAP_DMA_CICR_REG(lch) = dma_chan[lch].enabled_irqs;
@@ -470,11 +513,13 @@ int omap_request_dma(int dev_id, const char *dev_name,
chan->dev_name = dev_name;
chan->callback = callback;
chan->data = data;
- chan->enabled_irqs = OMAP_DMA_TOUT_IRQ | OMAP_DMA_DROP_IRQ |
- OMAP_DMA_BLOCK_IRQ;
+ chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
- if (cpu_is_omap24xx())
- chan->enabled_irqs |= OMAP2_DMA_TRANS_ERR_IRQ;
+ if (cpu_class_is_omap1())
+ chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ;
+ else if (cpu_is_omap24xx())
+ chan->enabled_irqs |= OMAP2_DMA_MISALIGNED_ERR_IRQ |
+ OMAP2_DMA_TRANS_ERR_IRQ;
if (cpu_is_omap16xx()) {
/* If the sync device is set, configure it dynamically. */
@@ -494,7 +539,7 @@ int omap_request_dma(int dev_id, const char *dev_name,
omap_enable_channel_irq(free_ch);
/* Clear the CSR register and IRQ status register */
- OMAP_DMA_CSR_REG(free_ch) = 0x0;
+ OMAP_DMA_CSR_REG(free_ch) = OMAP2_DMA_CSR_CLEAR_MASK;
omap_writel(~0x0, OMAP_DMA4_IRQSTATUS_L0);
}
@@ -534,7 +579,7 @@ void omap_free_dma(int lch)
omap_writel(val, OMAP_DMA4_IRQENABLE_L0);
/* Clear the CSR register and IRQ status register */
- OMAP_DMA_CSR_REG(lch) = 0x0;
+ OMAP_DMA_CSR_REG(lch) = OMAP2_DMA_CSR_CLEAR_MASK;
val = omap_readl(OMAP_DMA4_IRQSTATUS_L0);
val |= 1 << lch;
@@ -798,7 +843,7 @@ static int omap1_dma_handle_ch(int ch)
"%d (CSR %04x)\n", ch, csr);
return 0;
}
- if (unlikely(csr & OMAP_DMA_TOUT_IRQ))
+ if (unlikely(csr & OMAP1_DMA_TOUT_IRQ))
printk(KERN_WARNING "DMA timeout with device %d\n",
dma_chan[ch].dev_id);
if (unlikely(csr & OMAP_DMA_DROP_IRQ))
@@ -846,20 +891,21 @@ static int omap2_dma_handle_ch(int ch)
return 0;
if (unlikely(dma_chan[ch].dev_id == -1))
return 0;
- /* REVISIT: According to 24xx TRM, there's no TOUT_IE */
- if (unlikely(status & OMAP_DMA_TOUT_IRQ))
- printk(KERN_INFO "DMA timeout with device %d\n",
- dma_chan[ch].dev_id);
if (unlikely(status & OMAP_DMA_DROP_IRQ))
printk(KERN_INFO
"DMA synchronization event drop occurred with device "
"%d\n", dma_chan[ch].dev_id);
-
if (unlikely(status & OMAP2_DMA_TRANS_ERR_IRQ))
printk(KERN_INFO "DMA transaction error with device %d\n",
dma_chan[ch].dev_id);
+ if (unlikely(status & OMAP2_DMA_SECURE_ERR_IRQ))
+ printk(KERN_INFO "DMA secure error with device %d\n",
+ dma_chan[ch].dev_id);
+ if (unlikely(status & OMAP2_DMA_MISALIGNED_ERR_IRQ))
+ printk(KERN_INFO "DMA misaligned error with device %d\n",
+ dma_chan[ch].dev_id);
- OMAP_DMA_CSR_REG(ch) = 0x20;
+ OMAP_DMA_CSR_REG(ch) = OMAP2_DMA_CSR_CLEAR_MASK;
val = omap_readl(OMAP_DMA4_IRQSTATUS_L0);
/* ch in this function is from 0-31 while in register it is 1-32 */