diff options
Diffstat (limited to 'arch/arm/mm')
| -rw-r--r-- | arch/arm/mm/Kconfig | 18 | ||||
| -rw-r--r-- | arch/arm/mm/cache-l2x0.c | 6 | ||||
| -rw-r--r-- | arch/arm/mm/mmu.c | 14 | ||||
| -rw-r--r-- | arch/arm/mm/proc-syms.c | 2 | ||||
| -rw-r--r-- | arch/arm/mm/proc-v7.S | 33 |
5 files changed, 38 insertions, 35 deletions
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index e7904bc92c73..12161ae445da 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -345,13 +345,14 @@ config CPU_XSC3 # ARMv6 config CPU_V6 bool "Support ARM V6 processor" - depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 + depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3 + default y if ARCH_MX3 select CPU_32v6 select CPU_ABRT_EV6 select CPU_CACHE_V6 select CPU_CACHE_VIPT select CPU_CP15_MMU - select CPU_HAS_ASID + select CPU_HAS_ASID if MMU select CPU_COPY_V6 if MMU select CPU_TLB_V6 if MMU @@ -359,7 +360,7 @@ config CPU_V6 config CPU_32v6K bool "Support ARM V6K processor extensions" if !SMP depends on CPU_V6 - default y if SMP + default y if SMP && !ARCH_MX3 help Say Y here if your ARMv6 processor supports the 'K' extension. This enables the kernel to use some instructions not present @@ -377,7 +378,7 @@ config CPU_V7 select CPU_CACHE_V7 select CPU_CACHE_VIPT select CPU_CP15_MMU - select CPU_HAS_ASID + select CPU_HAS_ASID if MMU select CPU_COPY_V6 if MMU select CPU_TLB_V7 if MMU @@ -405,6 +406,7 @@ config CPU_32v5 config CPU_32v6 bool + select TLS_REG_EMUL if !CPU_32v6K && !MMU config CPU_32v7 bool @@ -598,7 +600,7 @@ config CPU_DCACHE_SIZE config CPU_DCACHE_WRITETHROUGH bool "Force write through D-cache" - depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_V6) && !CPU_DCACHE_DISABLE + depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020) && !CPU_DCACHE_DISABLE default y if CPU_ARM925T help Say Y here to use the data cache in writethrough mode. Unless you @@ -611,12 +613,6 @@ config CPU_CACHE_ROUND_ROBIN Say Y here to use the predictable round-robin cache replacement policy. Unless you specifically require this or are unsure, say N. -config CPU_L2CACHE_DISABLE - bool "Disable level 2 cache" - depends on CPU_V7 - help - Say Y here to disable the level 2 cache. If unsure, say N. - config CPU_BPREDICT_DISABLE bool "Disable branch prediction" depends on CPU_ARM1020 || CPU_V6 || CPU_XSC3 || CPU_V7 diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 08a36f1b35d2..b4e9b734e0bd 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -17,6 +17,7 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/init.h> +#include <linux/spinlock.h> #include <asm/cacheflush.h> #include <asm/io.h> @@ -25,14 +26,19 @@ #define CACHE_LINE_SIZE 32 static void __iomem *l2x0_base; +static DEFINE_SPINLOCK(l2x0_lock); static inline void sync_writel(unsigned long val, unsigned long reg, unsigned long complete_mask) { + unsigned long flags; + + spin_lock_irqsave(&l2x0_lock, flags); writel(val, l2x0_base + reg); /* wait for the operation to complete */ while (readl(l2x0_base + reg) & complete_mask) ; + spin_unlock_irqrestore(&l2x0_lock, flags); } static inline void cache_sync(void) diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 3b5e47dc0c97..e5d61ee3d4a1 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -114,6 +114,10 @@ static void __init early_cachepolicy(char **p) } if (i == ARRAY_SIZE(cache_policies)) printk(KERN_ERR "ERROR: unknown or unsupported cache policy\n"); + if (cpu_architecture() >= CPU_ARCH_ARMv6) { + printk(KERN_WARNING "Only cachepolicy=writeback supported on ARMv6 and later\n"); + cachepolicy = CPOLICY_WRITEBACK; + } flush_cache_all(); set_cr(cr_alignment); } @@ -252,13 +256,15 @@ static void __init build_mem_type_table(void) int cpu_arch = cpu_architecture(); int i; + if (cpu_arch < CPU_ARCH_ARMv6) { #if defined(CONFIG_CPU_DCACHE_DISABLE) - if (cachepolicy > CPOLICY_BUFFERED) - cachepolicy = CPOLICY_BUFFERED; + if (cachepolicy > CPOLICY_BUFFERED) + cachepolicy = CPOLICY_BUFFERED; #elif defined(CONFIG_CPU_DCACHE_WRITETHROUGH) - if (cachepolicy > CPOLICY_WRITETHROUGH) - cachepolicy = CPOLICY_WRITETHROUGH; + if (cachepolicy > CPOLICY_WRITETHROUGH) + cachepolicy = CPOLICY_WRITETHROUGH; #endif + } if (cpu_arch < CPU_ARCH_ARMv5) { if (cachepolicy >= CPOLICY_WRITEALLOC) cachepolicy = CPOLICY_WRITEBACK; diff --git a/arch/arm/mm/proc-syms.c b/arch/arm/mm/proc-syms.c index 9f396b4fa0b7..2b5ba396e3a6 100644 --- a/arch/arm/mm/proc-syms.c +++ b/arch/arm/mm/proc-syms.c @@ -31,12 +31,14 @@ EXPORT_SYMBOL(__cpuc_coherent_kern_range); EXPORT_SYMBOL(cpu_cache); #endif +#ifdef CONFIG_MMU #ifndef MULTI_USER EXPORT_SYMBOL(__cpu_clear_user_page); EXPORT_SYMBOL(__cpu_copy_user_page); #else EXPORT_SYMBOL(cpu_user); #endif +#endif /* * No module should need to touch the TLB (and currently diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 718f4782ee8b..e0acc5ae6f6f 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -77,6 +77,7 @@ ENTRY(cpu_v7_dcache_clean_area) * - we are not using split page tables */ ENTRY(cpu_v7_switch_mm) +#ifdef CONFIG_MMU mov r2, #0 ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id orr r0, r0, #TTB_RGN_OC_WB @ mark PTWs outer cacheable, WB @@ -86,6 +87,7 @@ ENTRY(cpu_v7_switch_mm) isb mcr p15, 0, r1, c13, c0, 1 @ set context ID isb +#endif mov pc, lr /* @@ -109,6 +111,7 @@ ENTRY(cpu_v7_switch_mm) * 1111 0 1 1 r/w r/w */ ENTRY(cpu_v7_set_pte_ext) +#ifdef CONFIG_MMU str r1, [r0], #-2048 @ linux version bic r3, r1, #0x000003f0 @@ -136,6 +139,7 @@ ENTRY(cpu_v7_set_pte_ext) str r3, [r0] mcr p15, 0, r0, c7, c10, 1 @ flush_pte +#endif mov pc, lr cpu_v7_name: @@ -169,6 +173,7 @@ __v7_setup: mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate #endif dsb +#ifdef CONFIG_MMU mcr p15, 0, r10, c8, c7, 0 @ invalidate I + D TLBs mcr p15, 0, r10, c2, c0, 2 @ TTB control register orr r4, r4, #TTB_RGN_OC_WB @ mark PTWs outer cacheable, WB @@ -176,21 +181,12 @@ __v7_setup: mcr p15, 0, r4, c2, c0, 1 @ load TTB1 mov r10, #0x1f @ domains 0, 1 = manager mcr p15, 0, r10, c3, c0, 0 @ load domain access register -#ifndef CONFIG_CPU_L2CACHE_DISABLE - @ L2 cache configuration in the L2 aux control register - mrc p15, 1, r10, c9, c0, 2 - bic r10, r10, #(1 << 16) @ L2 outer cache - mcr p15, 1, r10, c9, c0, 2 - @ L2 cache is enabled in the aux control register - mrc p15, 0, r10, c1, c0, 1 - orr r10, r10, #2 - mcr p15, 0, r10, c1, c0, 1 #endif - mrc p15, 0, r0, c1, c0, 0 @ read control register - ldr r10, cr1_clear @ get mask for bits to clear - bic r0, r0, r10 @ clear bits them - ldr r10, cr1_set @ get mask for bits to set - orr r0, r0, r10 @ set them + adr r5, v7_crval + ldmia r5, {r5, r6} + mrc p15, 0, r0, c1, c0, 0 @ read control register + bic r0, r0, r5 @ clear bits them + orr r0, r0, r6 @ set them mov pc, lr @ return to head.S:__ret /* @@ -199,12 +195,9 @@ __v7_setup: * rrrr rrrx xxx0 0101 xxxx xxxx x111 xxxx < forced * 0 110 0011 1.00 .111 1101 < we want */ - .type cr1_clear, #object - .type cr1_set, #object -cr1_clear: - .word 0x0120c302 -cr1_set: - .word 0x00c0387d + .type v7_crval, #object +v7_crval: + crval clear=0x0120c302, mmuset=0x00c0387d, ucset=0x00c0187c __v7_setup_stack: .space 4 * 11 @ 11 registers |