diff options
Diffstat (limited to 'arch/arm/mm/proc-arm1026.S')
| -rw-r--r-- | arch/arm/mm/proc-arm1026.S | 34 |
1 files changed, 17 insertions, 17 deletions
diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S index 4799a24b43e6..fc294067e977 100644 --- a/arch/arm/mm/proc-arm1026.S +++ b/arch/arm/mm/proc-arm1026.S @@ -62,7 +62,7 @@ * cpu_arm1026_proc_init() */ ENTRY(cpu_arm1026_proc_init) - mov pc, lr + ret lr /* * cpu_arm1026_proc_fin() @@ -72,7 +72,7 @@ ENTRY(cpu_arm1026_proc_fin) bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - mov pc, lr + ret lr /* * cpu_arm1026_reset(loc) @@ -96,7 +96,7 @@ ENTRY(cpu_arm1026_reset) bic ip, ip, #0x000f @ ............wcam bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register - mov pc, r0 + ret r0 ENDPROC(cpu_arm1026_reset) .popsection @@ -106,7 +106,7 @@ ENDPROC(cpu_arm1026_reset) .align 5 ENTRY(cpu_arm1026_do_idle) mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt - mov pc, lr + ret lr /* ================================= CACHE ================================ */ @@ -122,7 +122,7 @@ ENTRY(arm1026_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache #endif - mov pc, lr + ret lr ENDPROC(arm1026_flush_icache_all) /* @@ -151,7 +151,7 @@ __flush_whole_cache: mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache #endif mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * flush_user_cache_range(start, end, flags) @@ -180,7 +180,7 @@ ENTRY(arm1026_flush_user_cache_range) mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache #endif mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * coherent_kern_range(start, end) @@ -219,7 +219,7 @@ ENTRY(arm1026_coherent_user_range) blo 1b mcr p15, 0, ip, c7, c10, 4 @ drain WB mov r0, #0 - mov pc, lr + ret lr /* * flush_kern_dcache_area(void *addr, size_t size) @@ -240,7 +240,7 @@ ENTRY(arm1026_flush_kern_dcache_area) blo 1b #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_inv_range(start, end) @@ -269,7 +269,7 @@ arm1026_dma_inv_range: blo 1b #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_clean_range(start, end) @@ -291,7 +291,7 @@ arm1026_dma_clean_range: blo 1b #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_flush_range(start, end) @@ -311,7 +311,7 @@ ENTRY(arm1026_dma_flush_range) blo 1b #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_map_area(start, size, dir) @@ -334,7 +334,7 @@ ENDPROC(arm1026_dma_map_area) * - dir - DMA direction */ ENTRY(arm1026_dma_unmap_area) - mov pc, lr + ret lr ENDPROC(arm1026_dma_unmap_area) .globl arm1026_flush_kern_cache_louis @@ -352,7 +352,7 @@ ENTRY(cpu_arm1026_dcache_clean_area) subs r1, r1, #CACHE_DLINESIZE bhi 1b #endif - mov pc, lr + ret lr /* =============================== PageTable ============================== */ @@ -378,7 +378,7 @@ ENTRY(cpu_arm1026_switch_mm) mcr p15, 0, r0, c2, c0, 0 @ load page table pointer mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs #endif - mov pc, lr + ret lr /* * cpu_arm1026_set_pte_ext(ptep, pte, ext) @@ -394,7 +394,7 @@ ENTRY(cpu_arm1026_set_pte_ext) mcr p15, 0, r0, c7, c10, 1 @ clean D entry #endif #endif /* CONFIG_MMU */ - mov pc, lr + ret lr .type __arm1026_setup, #function __arm1026_setup: @@ -417,7 +417,7 @@ __arm1026_setup: #ifdef CONFIG_CPU_CACHE_ROUND_ROBIN orr r0, r0, #0x4000 @ .R.. .... .... .... #endif - mov pc, lr + ret lr .size __arm1026_setup, . - __arm1026_setup /* |