summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-ux500
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-ux500')
-rw-r--r--arch/arm/mach-ux500/Kconfig2
-rw-r--r--arch/arm/mach-ux500/board-mop500-audio.c22
-rw-r--r--arch/arm/mach-ux500/board-mop500-pins.c428
-rw-r--r--arch/arm/mach-ux500/board-mop500-sdi.c2
-rw-r--r--arch/arm/mach-ux500/board-mop500-stuib.c22
-rw-r--r--arch/arm/mach-ux500/board-mop500.c222
-rw-r--r--arch/arm/mach-ux500/board-mop500.h10
-rw-r--r--arch/arm/mach-ux500/cpu-db8500.c123
-rw-r--r--arch/arm/mach-ux500/cpu.c3
-rw-r--r--arch/arm/mach-ux500/devices-common.c4
-rw-r--r--arch/arm/mach-ux500/devices-common.h8
-rw-r--r--arch/arm/mach-ux500/devices-db8500.c4
-rw-r--r--arch/arm/mach-ux500/devices-db8500.h1
-rw-r--r--arch/arm/mach-ux500/include/mach/irqs.h2
-rw-r--r--arch/arm/mach-ux500/include/mach/msp.h2
-rw-r--r--arch/arm/mach-ux500/timer.c5
-rw-r--r--arch/arm/mach-ux500/usb.c4
17 files changed, 582 insertions, 282 deletions
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index e8c3f0d70ca6..5dea90636d94 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -7,8 +7,8 @@ config UX500_SOC_COMMON
select ARM_ERRATA_764369 if SMP
select ARM_GIC
select CACHE_L2X0
+ select CLKSRC_NOMADIK_MTU
select COMMON_CLK
- select HAS_MTU
select PINCTRL
select PINCTRL_NOMADIK
select PL310_ERRATA_753970 if CACHE_PL310
diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c
index 070629a95625..7209db7cdc72 100644
--- a/arch/arm/mach-ux500/board-mop500-audio.c
+++ b/arch/arm/mach-ux500/board-mop500-audio.c
@@ -7,10 +7,8 @@
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/gpio.h>
-
-#include <plat/gpio-nomadik.h>
-#include <plat/pincfg.h>
-#include <plat/ste_dma40.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
+#include <linux/platform_data/dma-ste-dma40.h>
#include <mach/devices.h>
#include <mach/hardware.h>
@@ -150,15 +148,6 @@ static struct platform_device snd_soc_mop500 = {
},
};
-/* Platform device for Ux500-PCM */
-static struct platform_device ux500_pcm = {
- .name = "ux500-pcm",
- .id = 0,
- .dev = {
- .platform_data = NULL,
- },
-};
-
struct msp_i2s_platform_data msp2_platform_data = {
.id = MSP_I2S_2,
.msp_i2s_dma_rx = &msp2_dma_rx,
@@ -186,10 +175,3 @@ void mop500_audio_init(struct device *parent)
db8500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1,
&msp3_platform_data);
}
-
-/* Due for removal once the MSP driver has been fully DT:ed. */
-void mop500_of_audio_init(struct device *parent)
-{
- pr_info("%s: Register platform-device 'ux500-pcm'\n", __func__);
- platform_device_register(&ux500_pcm);
-}
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c
index a267c6d30e37..0a3f30df1eb8 100644
--- a/arch/arm/mach-ux500/board-mop500-pins.c
+++ b/arch/arm/mach-ux500/board-mop500-pins.c
@@ -9,10 +9,9 @@
#include <linux/bug.h>
#include <linux/string.h>
#include <linux/pinctrl/machine.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
#include <asm/mach-types.h>
-#include <plat/pincfg.h>
-#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
@@ -34,8 +33,6 @@ BIAS(in_nopull, PIN_INPUT_NOPULL);
BIAS(in_nopull_slpm_nowkup, PIN_INPUT_NOPULL|PIN_SLPM_WAKEUP_DISABLE);
BIAS(in_pu, PIN_INPUT_PULLUP);
BIAS(in_pd, PIN_INPUT_PULLDOWN);
-BIAS(in_pd_slpm_in_pu, PIN_INPUT_PULLDOWN|PIN_SLPM_INPUT_PULLUP);
-BIAS(in_pu_slpm_out_lo, PIN_INPUT_PULLUP|PIN_SLPM_OUTPUT_LOW);
BIAS(out_hi, PIN_OUTPUT_HIGH);
BIAS(out_lo, PIN_OUTPUT_LOW);
BIAS(out_lo_slpm_nowkup, PIN_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE);
@@ -47,14 +44,34 @@ BIAS(gpio_in_pd_slpm_gpio_nopull, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED|PIN_SL
BIAS(gpio_out_hi, PIN_OUTPUT_HIGH|PIN_GPIOMODE_ENABLED);
BIAS(gpio_out_lo, PIN_OUTPUT_LOW|PIN_GPIOMODE_ENABLED);
/* Sleep modes */
-BIAS(slpm_in_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
-BIAS(slpm_in_nopull_wkup, PIN_SLEEPMODE_ENABLED|PIN_SLPM_DIR_INPUT|PIN_SLPM_PULL_NONE|PIN_SLPM_WAKEUP_ENABLE);
-BIAS(slpm_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
-BIAS(slpm_out_hi_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_OUTPUT_HIGH|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
-BIAS(slpm_out_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
-BIAS(slpm_out_lo_wkup, PIN_SLEEPMODE_ENABLED|PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_ENABLE);
-BIAS(slpm_out_lo_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
-BIAS(slpm_in_nopull_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_INPUT_NOPULL|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
+BIAS(slpm_in_nopull_wkup, PIN_SLEEPMODE_ENABLED|
+ PIN_SLPM_DIR_INPUT|PIN_SLPM_PULL_NONE|PIN_SLPM_WAKEUP_ENABLE);
+BIAS(slpm_in_wkup_pdis, PIN_SLEEPMODE_ENABLED|
+ PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
+BIAS(slpm_wkup_pdis, PIN_SLEEPMODE_ENABLED|
+ PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
+BIAS(slpm_out_lo_pdis, PIN_SLEEPMODE_ENABLED|
+ PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE|PIN_SLPM_PDIS_DISABLED);
+BIAS(slpm_out_lo_wkup, PIN_SLEEPMODE_ENABLED|
+ PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_ENABLE);
+BIAS(slpm_out_lo_wkup_pdis, PIN_SLEEPMODE_ENABLED|
+ PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
+BIAS(slpm_out_hi_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_OUTPUT_HIGH|
+ PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
+BIAS(slpm_in_nopull_wkup_pdis, PIN_SLEEPMODE_ENABLED|
+ PIN_SLPM_INPUT_NOPULL|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
+BIAS(slpm_in_pu_wkup_pdis_en, PIN_SLEEPMODE_ENABLED|PIN_SLPM_INPUT_PULLUP|
+ PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_ENABLED);
+BIAS(slpm_out_wkup_pdis, PIN_SLEEPMODE_ENABLED|
+ PIN_SLPM_DIR_OUTPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
+BIAS(out_lo_wkup_pdis, PIN_SLPM_OUTPUT_LOW|
+ PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
+BIAS(in_wkup_pdis_en, PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|
+ PIN_SLPM_PDIS_ENABLED);
+BIAS(in_wkup_pdis, PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|
+ PIN_SLPM_PDIS_DISABLED);
+BIAS(out_wkup_pdis, PIN_SLPM_DIR_OUTPUT|PIN_SLPM_WAKEUP_ENABLE|
+ PIN_SLPM_PDIS_DISABLED);
/* We use these to define hog settings that are always done on boot */
#define DB8500_MUX_HOG(group,func) \
@@ -70,13 +87,16 @@ BIAS(slpm_in_nopull_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_INPUT_NOPULL|PIN_S
PIN_MAP_MUX_GROUP_DEFAULT(dev, "pinctrl-db8500", group, func)
#define DB8500_PIN(pin,conf,dev) \
PIN_MAP_CONFIGS_PIN_DEFAULT(dev, "pinctrl-db8500", pin, conf)
-#define DB8500_PIN_SLEEP(pin, conf, dev) \
- PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_SLEEP, "pinctrl-db8500", \
+#define DB8500_PIN_IDLE(pin, conf, dev) \
+ PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_IDLE, "pinctrl-db8500", \
pin, conf)
-
-#define DB8500_PIN_SLEEP(pin,conf,dev) \
+#define DB8500_PIN_SLEEP(pin, conf, dev) \
PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_SLEEP, "pinctrl-db8500", \
pin, conf)
+#define DB8500_MUX_STATE(group, func, dev, state) \
+ PIN_MAP_MUX_GROUP(dev, state, "pinctrl-db8500", group, func)
+#define DB8500_PIN_STATE(pin, conf, dev, state) \
+ PIN_MAP_CONFIGS_PIN(dev, state, "pinctrl-db8500", pin, conf)
/* Pin control settings */
static struct pinctrl_map __initdata mop500_family_pinmap[] = {
@@ -113,7 +133,7 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = {
* UART0, we do not mux in u0 here.
* uart-0 pins gpio configuration should be kept intact to prevent
* a glitch in tx line when the tty dev is opened. Later these pins
- * are configured to uart mop500_pins_uart0
+ * are configured by uart driver
*/
DB8500_PIN_HOG("GPIO0_AJ5", in_pu), /* CTS */
DB8500_PIN_HOG("GPIO1_AJ3", out_hi), /* RTS */
@@ -124,12 +144,13 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = {
* TODO: is this used on U8500 variants and Snowball really?
* The setting on GPIO31 conflicts with magnetometer use on hrefv60
*/
- DB8500_MUX_HOG("u2rxtx_c_1", "u2"),
- DB8500_MUX_HOG("u2ctsrts_c_1", "u2"),
- DB8500_PIN_HOG("GPIO29_W2", in_pu), /* RXD */
- DB8500_PIN_HOG("GPIO30_W3", out_hi), /* TXD */
- DB8500_PIN_HOG("GPIO31_V3", in_pu), /* CTS */
- DB8500_PIN_HOG("GPIO32_V2", out_hi), /* RTS */
+ /* default state for UART2 */
+ DB8500_MUX("u2rxtx_c_1", "u2", "uart2"),
+ DB8500_PIN("GPIO29_W2", in_pu, "uart2"), /* RXD */
+ DB8500_PIN("GPIO30_W3", out_hi, "uart2"), /* TXD */
+ /* Sleep state for UART2 */
+ DB8500_PIN_SLEEP("GPIO29_W2", in_wkup_pdis, "uart2"),
+ DB8500_PIN_SLEEP("GPIO30_W3", out_wkup_pdis, "uart2"),
/*
* The following pin sets were known as "runtime pins" before being
* converted to the pinctrl model. Here we model them as "default"
@@ -141,11 +162,18 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = {
DB8500_PIN("GPIO1_AJ3", out_hi, "uart0"), /* RTS */
DB8500_PIN("GPIO2_AH4", in_pu, "uart0"), /* RXD */
DB8500_PIN("GPIO3_AH3", out_hi, "uart0"), /* TXD */
- /* UART0 sleep state */
+ /* Sleep state for UART0 */
DB8500_PIN_SLEEP("GPIO0_AJ5", slpm_in_wkup_pdis, "uart0"),
DB8500_PIN_SLEEP("GPIO1_AJ3", slpm_out_hi_wkup_pdis, "uart0"),
DB8500_PIN_SLEEP("GPIO2_AH4", slpm_in_wkup_pdis, "uart0"),
DB8500_PIN_SLEEP("GPIO3_AH3", slpm_out_wkup_pdis, "uart0"),
+ /* Mux in UART1 after initialization */
+ DB8500_MUX("u1rxtx_a_1", "u1", "uart1"),
+ DB8500_PIN("GPIO4_AH6", in_pu, "uart1"), /* RXD */
+ DB8500_PIN("GPIO5_AG6", out_hi, "uart1"), /* TXD */
+ /* Sleep state for UART1 */
+ DB8500_PIN_SLEEP("GPIO4_AH6", slpm_in_wkup_pdis, "uart1"),
+ DB8500_PIN_SLEEP("GPIO5_AG6", slpm_out_wkup_pdis, "uart1"),
/* MSP1 for ALSA codec */
DB8500_MUX("msp1txrx_a_1", "msp1", "ux500-msp-i2s.1"),
DB8500_MUX("msp1_a_1", "msp1", "ux500-msp-i2s.1"),
@@ -162,7 +190,10 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = {
DB8500_MUX("lcd_d8_d11_a_1", "lcd", "mcde-tvout"),
DB8500_MUX("lcdaclk_b_1", "lcda", "mcde-tvout"),
/* Mux in LCD VSI1 and pull it up for MCDE HDMI output */
- DB8500_MUX("lcdvsi1_a_1", "lcd", "av8100-hdmi"),
+ DB8500_MUX("lcdvsi1_a_1", "lcd", "0-0070"),
+ DB8500_PIN("GPIO69_E2", in_pu, "0-0070"),
+ /* LCD VSI1 sleep state */
+ DB8500_PIN_SLEEP("GPIO69_E2", slpm_in_wkup_pdis, "0-0070"),
/* Mux in i2c0 block, default state */
DB8500_MUX("i2c0_a_1", "i2c0", "nmk-i2c.0"),
/* i2c0 sleep state */
@@ -195,6 +226,18 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = {
DB8500_PIN("GPIO26_Y2", in_pu, "sdi0"), /* DAT1 */
DB8500_PIN("GPIO27_AA2", in_pu, "sdi0"), /* DAT2 */
DB8500_PIN("GPIO28_AA1", in_pu, "sdi0"), /* DAT3 */
+ /* SDI0 sleep state */
+ DB8500_PIN_SLEEP("GPIO18_AC2", slpm_out_hi_wkup_pdis, "sdi0"),
+ DB8500_PIN_SLEEP("GPIO19_AC1", slpm_out_hi_wkup_pdis, "sdi0"),
+ DB8500_PIN_SLEEP("GPIO20_AB4", slpm_out_hi_wkup_pdis, "sdi0"),
+ DB8500_PIN_SLEEP("GPIO22_AA3", slpm_in_wkup_pdis, "sdi0"),
+ DB8500_PIN_SLEEP("GPIO23_AA4", slpm_out_lo_wkup_pdis, "sdi0"),
+ DB8500_PIN_SLEEP("GPIO24_AB2", slpm_in_wkup_pdis, "sdi0"),
+ DB8500_PIN_SLEEP("GPIO25_Y4", slpm_in_wkup_pdis, "sdi0"),
+ DB8500_PIN_SLEEP("GPIO26_Y2", slpm_in_wkup_pdis, "sdi0"),
+ DB8500_PIN_SLEEP("GPIO27_AA2", slpm_in_wkup_pdis, "sdi0"),
+ DB8500_PIN_SLEEP("GPIO28_AA1", slpm_in_wkup_pdis, "sdi0"),
+
/* Mux in SDI1 (here called MC1) used for SDIO for CW1200 WLAN */
DB8500_MUX("mc1_a_1", "mc1", "sdi1"),
DB8500_PIN("GPIO208_AH16", out_lo, "sdi1"), /* CLK */
@@ -204,6 +247,15 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = {
DB8500_PIN("GPIO212_AF13", in_pu, "sdi1"), /* DAT1 */
DB8500_PIN("GPIO213_AG13", in_pu, "sdi1"), /* DAT2 */
DB8500_PIN("GPIO214_AH15", in_pu, "sdi1"), /* DAT3 */
+ /* SDI1 sleep state */
+ DB8500_PIN_SLEEP("GPIO208_AH16", slpm_out_lo_wkup_pdis, "sdi1"), /* CLK */
+ DB8500_PIN_SLEEP("GPIO209_AG15", slpm_in_wkup_pdis, "sdi1"), /* FBCLK */
+ DB8500_PIN_SLEEP("GPIO210_AJ15", slpm_in_wkup_pdis, "sdi1"), /* CMD */
+ DB8500_PIN_SLEEP("GPIO211_AG14", slpm_in_wkup_pdis, "sdi1"), /* DAT0 */
+ DB8500_PIN_SLEEP("GPIO212_AF13", slpm_in_wkup_pdis, "sdi1"), /* DAT1 */
+ DB8500_PIN_SLEEP("GPIO213_AG13", slpm_in_wkup_pdis, "sdi1"), /* DAT2 */
+ DB8500_PIN_SLEEP("GPIO214_AH15", slpm_in_wkup_pdis, "sdi1"), /* DAT3 */
+
/* Mux in SDI2 (here called MC2) used for for PoP eMMC */
DB8500_MUX("mc2_a_1", "mc2", "sdi2"),
DB8500_PIN("GPIO128_A5", out_lo, "sdi2"), /* CLK */
@@ -217,6 +269,19 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = {
DB8500_PIN("GPIO136_C7", in_pu, "sdi2"), /* DAT5 */
DB8500_PIN("GPIO137_A7", in_pu, "sdi2"), /* DAT6 */
DB8500_PIN("GPIO138_C5", in_pu, "sdi2"), /* DAT7 */
+ /* SDI2 sleep state */
+ DB8500_PIN_SLEEP("GPIO128_A5", out_lo_wkup_pdis, "sdi2"), /* CLK */
+ DB8500_PIN_SLEEP("GPIO129_B4", in_wkup_pdis_en, "sdi2"), /* CMD */
+ DB8500_PIN_SLEEP("GPIO130_C8", in_wkup_pdis_en, "sdi2"), /* FBCLK */
+ DB8500_PIN_SLEEP("GPIO131_A12", in_wkup_pdis, "sdi2"), /* DAT0 */
+ DB8500_PIN_SLEEP("GPIO132_C10", in_wkup_pdis, "sdi2"), /* DAT1 */
+ DB8500_PIN_SLEEP("GPIO133_B10", in_wkup_pdis, "sdi2"), /* DAT2 */
+ DB8500_PIN_SLEEP("GPIO134_B9", in_wkup_pdis, "sdi2"), /* DAT3 */
+ DB8500_PIN_SLEEP("GPIO135_A9", in_wkup_pdis, "sdi2"), /* DAT4 */
+ DB8500_PIN_SLEEP("GPIO136_C7", in_wkup_pdis, "sdi2"), /* DAT5 */
+ DB8500_PIN_SLEEP("GPIO137_A7", in_wkup_pdis, "sdi2"), /* DAT6 */
+ DB8500_PIN_SLEEP("GPIO138_C5", in_wkup_pdis, "sdi2"), /* DAT7 */
+
/* Mux in SDI4 (here called MC4) used for for PCB-mounted eMMC */
DB8500_MUX("mc4_a_1", "mc4", "sdi4"),
DB8500_PIN("GPIO197_AH24", in_pu, "sdi4"), /* DAT3 */
@@ -230,6 +295,19 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = {
DB8500_PIN("GPIO205_AG23", in_pu, "sdi4"), /* DAT6 */
DB8500_PIN("GPIO206_AG24", in_pu, "sdi4"), /* DAT5 */
DB8500_PIN("GPIO207_AJ23", in_pu, "sdi4"), /* DAT4 */
+ /*SDI4 sleep state */
+ DB8500_PIN_SLEEP("GPIO197_AH24", slpm_in_wkup_pdis, "sdi4"), /* DAT3 */
+ DB8500_PIN_SLEEP("GPIO198_AG25", slpm_in_wkup_pdis, "sdi4"), /* DAT2 */
+ DB8500_PIN_SLEEP("GPIO199_AH23", slpm_in_wkup_pdis, "sdi4"), /* DAT1 */
+ DB8500_PIN_SLEEP("GPIO200_AH26", slpm_in_wkup_pdis, "sdi4"), /* DAT0 */
+ DB8500_PIN_SLEEP("GPIO201_AF24", slpm_in_wkup_pdis, "sdi4"), /* CMD */
+ DB8500_PIN_SLEEP("GPIO202_AF25", slpm_in_wkup_pdis, "sdi4"), /* FBCLK */
+ DB8500_PIN_SLEEP("GPIO203_AE23", slpm_out_lo_wkup_pdis, "sdi4"), /* CLK */
+ DB8500_PIN_SLEEP("GPIO204_AF23", slpm_in_wkup_pdis, "sdi4"), /* DAT7 */
+ DB8500_PIN_SLEEP("GPIO205_AG23", slpm_in_wkup_pdis, "sdi4"), /* DAT6 */
+ DB8500_PIN_SLEEP("GPIO206_AG24", slpm_in_wkup_pdis, "sdi4"), /* DAT5 */
+ DB8500_PIN_SLEEP("GPIO207_AJ23", slpm_in_wkup_pdis, "sdi4"), /* DAT4 */
+
/* Mux in USB pins, drive STP high */
DB8500_MUX("usb_a_1", "usb", "musb-ux500.0"),
DB8500_PIN("GPIO257_AE29", out_hi, "musb-ux500.0"), /* STP */
@@ -239,10 +317,232 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = {
DB8500_PIN("GPIO218_AH11", in_pd, "spi2"), /* RXD */
DB8500_PIN("GPIO215_AH13", out_lo, "spi2"), /* TXD */
DB8500_PIN("GPIO217_AH12", out_lo, "spi2"), /* CLK */
+ /* SPI2 idle state */
+ DB8500_PIN_SLEEP("GPIO218_AH11", slpm_in_wkup_pdis, "spi2"), /* RXD */
+ DB8500_PIN_SLEEP("GPIO215_AH13", slpm_out_lo_wkup_pdis, "spi2"), /* TXD */
+ DB8500_PIN_SLEEP("GPIO217_AH12", slpm_wkup_pdis, "spi2"), /* CLK */
/* SPI2 sleep state */
+ DB8500_PIN_SLEEP("GPIO216_AG12", slpm_in_wkup_pdis, "spi2"), /* FRM */
DB8500_PIN_SLEEP("GPIO218_AH11", slpm_in_wkup_pdis, "spi2"), /* RXD */
DB8500_PIN_SLEEP("GPIO215_AH13", slpm_out_lo_wkup_pdis, "spi2"), /* TXD */
DB8500_PIN_SLEEP("GPIO217_AH12", slpm_wkup_pdis, "spi2"), /* CLK */
+
+ /* ske default state */
+ DB8500_MUX("kp_a_2", "kp", "nmk-ske-keypad"),
+ DB8500_PIN("GPIO153_B17", in_pd, "nmk-ske-keypad"), /* I7 */
+ DB8500_PIN("GPIO154_C16", in_pd, "nmk-ske-keypad"), /* I6 */
+ DB8500_PIN("GPIO155_C19", in_pd, "nmk-ske-keypad"), /* I5 */
+ DB8500_PIN("GPIO156_C17", in_pd, "nmk-ske-keypad"), /* I4 */
+ DB8500_PIN("GPIO161_D21", in_pd, "nmk-ske-keypad"), /* I3 */
+ DB8500_PIN("GPIO162_D20", in_pd, "nmk-ske-keypad"), /* I2 */
+ DB8500_PIN("GPIO163_C20", in_pd, "nmk-ske-keypad"), /* I1 */
+ DB8500_PIN("GPIO164_B21", in_pd, "nmk-ske-keypad"), /* I0 */
+ DB8500_PIN("GPIO157_A18", out_lo, "nmk-ske-keypad"), /* O7 */
+ DB8500_PIN("GPIO158_C18", out_lo, "nmk-ske-keypad"), /* O6 */
+ DB8500_PIN("GPIO159_B19", out_lo, "nmk-ske-keypad"), /* O5 */
+ DB8500_PIN("GPIO160_B20", out_lo, "nmk-ske-keypad"), /* O4 */
+ DB8500_PIN("GPIO165_C21", out_lo, "nmk-ske-keypad"), /* O3 */
+ DB8500_PIN("GPIO166_A22", out_lo, "nmk-ske-keypad"), /* O2 */
+ DB8500_PIN("GPIO167_B24", out_lo, "nmk-ske-keypad"), /* O1 */
+ DB8500_PIN("GPIO168_C22", out_lo, "nmk-ske-keypad"), /* O0 */
+ /* ske sleep state */
+ DB8500_PIN_SLEEP("GPIO153_B17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I7 */
+ DB8500_PIN_SLEEP("GPIO154_C16", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I6 */
+ DB8500_PIN_SLEEP("GPIO155_C19", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I5 */
+ DB8500_PIN_SLEEP("GPIO156_C17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I4 */
+ DB8500_PIN_SLEEP("GPIO161_D21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I3 */
+ DB8500_PIN_SLEEP("GPIO162_D20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I2 */
+ DB8500_PIN_SLEEP("GPIO163_C20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I1 */
+ DB8500_PIN_SLEEP("GPIO164_B21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I0 */
+ DB8500_PIN_SLEEP("GPIO157_A18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O7 */
+ DB8500_PIN_SLEEP("GPIO158_C18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O6 */
+ DB8500_PIN_SLEEP("GPIO159_B19", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O5 */
+ DB8500_PIN_SLEEP("GPIO160_B20", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O4 */
+ DB8500_PIN_SLEEP("GPIO165_C21", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O3 */
+ DB8500_PIN_SLEEP("GPIO166_A22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O2 */
+ DB8500_PIN_SLEEP("GPIO167_B24", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O1 */
+ DB8500_PIN_SLEEP("GPIO168_C22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O0 */
+
+ /* STM APE pins states */
+ DB8500_MUX_STATE("stmape_c_1", "stmape",
+ "stm", "ape_mipi34"),
+ DB8500_PIN_STATE("GPIO70_G5", in_nopull,
+ "stm", "ape_mipi34"), /* clk */
+ DB8500_PIN_STATE("GPIO71_G4", in_nopull,
+ "stm", "ape_mipi34"), /* dat3 */
+ DB8500_PIN_STATE("GPIO72_H4", in_nopull,
+ "stm", "ape_mipi34"), /* dat2 */
+ DB8500_PIN_STATE("GPIO73_H3", in_nopull,
+ "stm", "ape_mipi34"), /* dat1 */
+ DB8500_PIN_STATE("GPIO74_J3", in_nopull,
+ "stm", "ape_mipi34"), /* dat0 */
+
+ DB8500_PIN_STATE("GPIO70_G5", slpm_out_lo_pdis,
+ "stm", "ape_mipi34_sleep"), /* clk */
+ DB8500_PIN_STATE("GPIO71_G4", slpm_out_lo_pdis,
+ "stm", "ape_mipi34_sleep"), /* dat3 */
+ DB8500_PIN_STATE("GPIO72_H4", slpm_out_lo_pdis,
+ "stm", "ape_mipi34_sleep"), /* dat2 */
+ DB8500_PIN_STATE("GPIO73_H3", slpm_out_lo_pdis,
+ "stm", "ape_mipi34_sleep"), /* dat1 */
+ DB8500_PIN_STATE("GPIO74_J3", slpm_out_lo_pdis,
+ "stm", "ape_mipi34_sleep"), /* dat0 */
+
+ DB8500_MUX_STATE("stmape_oc1_1", "stmape",
+ "stm", "ape_microsd"),
+ DB8500_PIN_STATE("GPIO23_AA4", in_nopull,
+ "stm", "ape_microsd"), /* clk */
+ DB8500_PIN_STATE("GPIO25_Y4", in_nopull,
+ "stm", "ape_microsd"), /* dat0 */
+ DB8500_PIN_STATE("GPIO26_Y2", in_nopull,
+ "stm", "ape_microsd"), /* dat1 */
+ DB8500_PIN_STATE("GPIO27_AA2", in_nopull,
+ "stm", "ape_microsd"), /* dat2 */
+ DB8500_PIN_STATE("GPIO28_AA1", in_nopull,
+ "stm", "ape_microsd"), /* dat3 */
+
+ DB8500_PIN_STATE("GPIO23_AA4", slpm_out_lo_wkup_pdis,
+ "stm", "ape_microsd_sleep"), /* clk */
+ DB8500_PIN_STATE("GPIO25_Y4", slpm_in_wkup_pdis,
+ "stm", "ape_microsd_sleep"), /* dat0 */
+ DB8500_PIN_STATE("GPIO26_Y2", slpm_in_wkup_pdis,
+ "stm", "ape_microsd_sleep"), /* dat1 */
+ DB8500_PIN_STATE("GPIO27_AA2", slpm_in_wkup_pdis,
+ "stm", "ape_microsd_sleep"), /* dat2 */
+ DB8500_PIN_STATE("GPIO28_AA1", slpm_in_wkup_pdis,
+ "stm", "ape_microsd_sleep"), /* dat3 */
+
+ /* STM Modem pins states */
+ DB8500_MUX_STATE("stmmod_oc3_2", "stmmod",
+ "stm", "mod_mipi34"),
+ DB8500_MUX_STATE("uartmodrx_oc3_1", "uartmod",
+ "stm", "mod_mipi34"),
+ DB8500_MUX_STATE("uartmodtx_oc3_1", "uartmod",
+ "stm", "mod_mipi34"),
+ DB8500_PIN_STATE("GPIO70_G5", in_nopull,
+ "stm", "mod_mipi34"), /* clk */
+ DB8500_PIN_STATE("GPIO71_G4", in_nopull,
+ "stm", "mod_mipi34"), /* dat3 */
+ DB8500_PIN_STATE("GPIO72_H4", in_nopull,
+ "stm", "mod_mipi34"), /* dat2 */
+ DB8500_PIN_STATE("GPIO73_H3", in_nopull,
+ "stm", "mod_mipi34"), /* dat1 */
+ DB8500_PIN_STATE("GPIO74_J3", in_nopull,
+ "stm", "mod_mipi34"), /* dat0 */
+ DB8500_PIN_STATE("GPIO75_H2", in_pu,
+ "stm", "mod_mipi34"), /* uartmod rx */
+ DB8500_PIN_STATE("GPIO76_J2", out_lo,
+ "stm", "mod_mipi34"), /* uartmod tx */
+
+ DB8500_PIN_STATE("GPIO70_G5", slpm_out_lo_pdis,
+ "stm", "mod_mipi34_sleep"), /* clk */
+ DB8500_PIN_STATE("GPIO71_G4", slpm_out_lo_pdis,
+ "stm", "mod_mipi34_sleep"), /* dat3 */
+ DB8500_PIN_STATE("GPIO72_H4", slpm_out_lo_pdis,
+ "stm", "mod_mipi34_sleep"), /* dat2 */
+ DB8500_PIN_STATE("GPIO73_H3", slpm_out_lo_pdis,
+ "stm", "mod_mipi34_sleep"), /* dat1 */
+ DB8500_PIN_STATE("GPIO74_J3", slpm_out_lo_pdis,
+ "stm", "mod_mipi34_sleep"), /* dat0 */
+ DB8500_PIN_STATE("GPIO75_H2", slpm_in_wkup_pdis,
+ "stm", "mod_mipi34_sleep"), /* uartmod rx */
+ DB8500_PIN_STATE("GPIO76_J2", slpm_out_lo_wkup_pdis,
+ "stm", "mod_mipi34_sleep"), /* uartmod tx */
+
+ DB8500_MUX_STATE("stmmod_b_1", "stmmod",
+ "stm", "mod_microsd"),
+ DB8500_MUX_STATE("uartmodrx_oc3_1", "uartmod",
+ "stm", "mod_microsd"),
+ DB8500_MUX_STATE("uartmodtx_oc3_1", "uartmod",
+ "stm", "mod_microsd"),
+ DB8500_PIN_STATE("GPIO23_AA4", in_nopull,
+ "stm", "mod_microsd"), /* clk */
+ DB8500_PIN_STATE("GPIO25_Y4", in_nopull,
+ "stm", "mod_microsd"), /* dat0 */
+ DB8500_PIN_STATE("GPIO26_Y2", in_nopull,
+ "stm", "mod_microsd"), /* dat1 */
+ DB8500_PIN_STATE("GPIO27_AA2", in_nopull,
+ "stm", "mod_microsd"), /* dat2 */
+ DB8500_PIN_STATE("GPIO28_AA1", in_nopull,
+ "stm", "mod_microsd"), /* dat3 */
+ DB8500_PIN_STATE("GPIO75_H2", in_pu,
+ "stm", "mod_microsd"), /* uartmod rx */
+ DB8500_PIN_STATE("GPIO76_J2", out_lo,
+ "stm", "mod_microsd"), /* uartmod tx */
+
+ DB8500_PIN_STATE("GPIO23_AA4", slpm_out_lo_wkup_pdis,
+ "stm", "mod_microsd_sleep"), /* clk */
+ DB8500_PIN_STATE("GPIO25_Y4", slpm_in_wkup_pdis,
+ "stm", "mod_microsd_sleep"), /* dat0 */
+ DB8500_PIN_STATE("GPIO26_Y2", slpm_in_wkup_pdis,
+ "stm", "mod_microsd_sleep"), /* dat1 */
+ DB8500_PIN_STATE("GPIO27_AA2", slpm_in_wkup_pdis,
+ "stm", "mod_microsd_sleep"), /* dat2 */
+ DB8500_PIN_STATE("GPIO28_AA1", slpm_in_wkup_pdis,
+ "stm", "mod_microsd_sleep"), /* dat3 */
+ DB8500_PIN_STATE("GPIO75_H2", slpm_in_wkup_pdis,
+ "stm", "mod_microsd_sleep"), /* uartmod rx */
+ DB8500_PIN_STATE("GPIO76_J2", slpm_out_lo_wkup_pdis,
+ "stm", "mod_microsd_sleep"), /* uartmod tx */
+
+ /* STM dual Modem/APE pins state */
+ DB8500_MUX_STATE("stmmod_oc3_2", "stmmod",
+ "stm", "mod_mipi34_ape_mipi60"),
+ DB8500_MUX_STATE("stmape_c_2", "stmape",
+ "stm", "mod_mipi34_ape_mipi60"),
+ DB8500_MUX_STATE("uartmodrx_oc3_1", "uartmod",
+ "stm", "mod_mipi34_ape_mipi60"),
+ DB8500_MUX_STATE("uartmodtx_oc3_1", "uartmod",
+ "stm", "mod_mipi34_ape_mipi60"),
+ DB8500_PIN_STATE("GPIO70_G5", in_nopull,
+ "stm", "mod_mipi34_ape_mipi60"), /* clk */
+ DB8500_PIN_STATE("GPIO71_G4", in_nopull,
+ "stm", "mod_mipi34_ape_mipi60"), /* dat3 */
+ DB8500_PIN_STATE("GPIO72_H4", in_nopull,
+ "stm", "mod_mipi34_ape_mipi60"), /* dat2 */
+ DB8500_PIN_STATE("GPIO73_H3", in_nopull,
+ "stm", "mod_mipi34_ape_mipi60"), /* dat1 */
+ DB8500_PIN_STATE("GPIO74_J3", in_nopull,
+ "stm", "mod_mipi34_ape_mipi60"), /* dat0 */
+ DB8500_PIN_STATE("GPIO75_H2", in_pu,
+ "stm", "mod_mipi34_ape_mipi60"), /* uartmod rx */
+ DB8500_PIN_STATE("GPIO76_J2", out_lo,
+ "stm", "mod_mipi34_ape_mipi60"), /* uartmod tx */
+ DB8500_PIN_STATE("GPIO155_C19", in_nopull,
+ "stm", "mod_mipi34_ape_mipi60"), /* clk */
+ DB8500_PIN_STATE("GPIO156_C17", in_nopull,
+ "stm", "mod_mipi34_ape_mipi60"), /* dat3 */
+ DB8500_PIN_STATE("GPIO157_A18", in_nopull,
+ "stm", "mod_mipi34_ape_mipi60"), /* dat2 */
+ DB8500_PIN_STATE("GPIO158_C18", in_nopull,
+ "stm", "mod_mipi34_ape_mipi60"), /* dat1 */
+ DB8500_PIN_STATE("GPIO159_B19", in_nopull,
+ "stm", "mod_mipi34_ape_mipi60"), /* dat0 */
+
+ DB8500_PIN_STATE("GPIO70_G5", slpm_out_lo_pdis,
+ "stm", "mod_mipi34_ape_mipi60_sleep"), /* clk */
+ DB8500_PIN_STATE("GPIO71_G4", slpm_out_lo_pdis,
+ "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat3 */
+ DB8500_PIN_STATE("GPIO72_H4", slpm_out_lo_pdis,
+ "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat2 */
+ DB8500_PIN_STATE("GPIO73_H3", slpm_out_lo_pdis,
+ "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat1 */
+ DB8500_PIN_STATE("GPIO74_J3", slpm_out_lo_pdis,
+ "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat0 */
+ DB8500_PIN_STATE("GPIO75_H2", slpm_in_wkup_pdis,
+ "stm", "mod_mipi34_ape_mipi60_sleep"), /* uartmod rx */
+ DB8500_PIN_STATE("GPIO76_J2", slpm_out_lo_wkup_pdis,
+ "stm", "mod_mipi34_ape_mipi60_sleep"), /* uartmod tx */
+ DB8500_PIN_STATE("GPIO155_C19", slpm_in_wkup_pdis,
+ "stm", "mod_mipi34_ape_mipi60_sleep"), /* clk */
+ DB8500_PIN_STATE("GPIO156_C17", slpm_in_wkup_pdis,
+ "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat3 */
+ DB8500_PIN_STATE("GPIO157_A18", slpm_in_wkup_pdis,
+ "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat2 */
+ DB8500_PIN_STATE("GPIO158_C18", slpm_in_wkup_pdis,
+ "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat1 */
+ DB8500_PIN_STATE("GPIO159_B19", slpm_in_wkup_pdis,
+ "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat0 */
};
/*
@@ -268,32 +568,48 @@ static struct pinctrl_map __initdata mop500_pinmap[] = {
DB8500_PIN_HOG("GPIO217_AH12", gpio_in_pu),
/* Mux in UART1 and set the pull-ups */
DB8500_MUX_HOG("u1rxtx_a_1", "u1"),
- DB8500_MUX_HOG("u1ctsrts_a_1", "u1"),
DB8500_PIN_HOG("GPIO4_AH6", in_pu), /* RXD */
DB8500_PIN_HOG("GPIO5_AG6", out_hi), /* TXD */
- DB8500_PIN_HOG("GPIO6_AF6", in_pu), /* CTS */
- DB8500_PIN_HOG("GPIO7_AG5", out_hi), /* RTS */
/*
* Runtime stuff: make it possible to mux in the SKE keypad
* and bias the pins
*/
- DB8500_MUX("kp_a_2", "kp", "ske"),
- DB8500_PIN("GPIO153_B17", in_pd_slpm_in_pu, "ske"), /* I7 */
- DB8500_PIN("GPIO154_C16", in_pd_slpm_in_pu, "ske"), /* I6 */
- DB8500_PIN("GPIO155_C19", in_pd_slpm_in_pu, "ske"), /* I5 */
- DB8500_PIN("GPIO156_C17", in_pd_slpm_in_pu, "ske"), /* I4 */
- DB8500_PIN("GPIO161_D21", in_pd_slpm_in_pu, "ske"), /* I3 */
- DB8500_PIN("GPIO162_D20", in_pd_slpm_in_pu, "ske"), /* I2 */
- DB8500_PIN("GPIO163_C20", in_pd_slpm_in_pu, "ske"), /* I1 */
- DB8500_PIN("GPIO164_B21", in_pd_slpm_in_pu, "ske"), /* I0 */
- DB8500_PIN("GPIO157_A18", in_pu_slpm_out_lo, "ske"), /* O7 */
- DB8500_PIN("GPIO158_C18", in_pu_slpm_out_lo, "ske"), /* O6 */
- DB8500_PIN("GPIO159_B19", in_pu_slpm_out_lo, "ske"), /* O5 */
- DB8500_PIN("GPIO160_B20", in_pu_slpm_out_lo, "ske"), /* O4 */
- DB8500_PIN("GPIO165_C21", in_pu_slpm_out_lo, "ske"), /* O3 */
- DB8500_PIN("GPIO166_A22", in_pu_slpm_out_lo, "ske"), /* O2 */
- DB8500_PIN("GPIO167_B24", in_pu_slpm_out_lo, "ske"), /* O1 */
- DB8500_PIN("GPIO168_C22", in_pu_slpm_out_lo, "ske"), /* O0 */
+ /* ske default state */
+ DB8500_MUX("kp_a_2", "kp", "nmk-ske-keypad"),
+ DB8500_PIN("GPIO153_B17", in_pu, "nmk-ske-keypad"), /* I7 */
+ DB8500_PIN("GPIO154_C16", in_pu, "nmk-ske-keypad"), /* I6 */
+ DB8500_PIN("GPIO155_C19", in_pu, "nmk-ske-keypad"), /* I5 */
+ DB8500_PIN("GPIO156_C17", in_pu, "nmk-ske-keypad"), /* I4 */
+ DB8500_PIN("GPIO161_D21", in_pu, "nmk-ske-keypad"), /* I3 */
+ DB8500_PIN("GPIO162_D20", in_pu, "nmk-ske-keypad"), /* I2 */
+ DB8500_PIN("GPIO163_C20", in_pu, "nmk-ske-keypad"), /* I1 */
+ DB8500_PIN("GPIO164_B21", in_pu, "nmk-ske-keypad"), /* I0 */
+ DB8500_PIN("GPIO157_A18", out_lo, "nmk-ske-keypad"), /* O7 */
+ DB8500_PIN("GPIO158_C18", out_lo, "nmk-ske-keypad"), /* O6 */
+ DB8500_PIN("GPIO159_B19", out_lo, "nmk-ske-keypad"), /* O5 */
+ DB8500_PIN("GPIO160_B20", out_lo, "nmk-ske-keypad"), /* O4 */
+ DB8500_PIN("GPIO165_C21", out_lo, "nmk-ske-keypad"), /* O3 */
+ DB8500_PIN("GPIO166_A22", out_lo, "nmk-ske-keypad"), /* O2 */
+ DB8500_PIN("GPIO167_B24", out_lo, "nmk-ske-keypad"), /* O1 */
+ DB8500_PIN("GPIO168_C22", out_lo, "nmk-ske-keypad"), /* O0 */
+ /* ske sleep state */
+ DB8500_PIN_SLEEP("GPIO153_B17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I7 */
+ DB8500_PIN_SLEEP("GPIO154_C16", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I6 */
+ DB8500_PIN_SLEEP("GPIO155_C19", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I5 */
+ DB8500_PIN_SLEEP("GPIO156_C17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I4 */
+ DB8500_PIN_SLEEP("GPIO161_D21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I3 */
+ DB8500_PIN_SLEEP("GPIO162_D20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I2 */
+ DB8500_PIN_SLEEP("GPIO163_C20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I1 */
+ DB8500_PIN_SLEEP("GPIO164_B21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I0 */
+ DB8500_PIN_SLEEP("GPIO157_A18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O7 */
+ DB8500_PIN_SLEEP("GPIO158_C18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O6 */
+ DB8500_PIN_SLEEP("GPIO159_B19", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O5 */
+ DB8500_PIN_SLEEP("GPIO160_B20", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O4 */
+ DB8500_PIN_SLEEP("GPIO165_C21", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O3 */
+ DB8500_PIN_SLEEP("GPIO166_A22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O2 */
+ DB8500_PIN_SLEEP("GPIO167_B24", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O1 */
+ DB8500_PIN_SLEEP("GPIO168_C22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O0 */
+
/* Mux in and drive the SDI0 DAT31DIR line high at runtime */
DB8500_MUX("mc0dat31dir_a_1", "mc0", "sdi0"),
DB8500_PIN("GPIO21_AB3", out_hi, "sdi0"),
@@ -396,28 +712,6 @@ static struct pinctrl_map __initdata hrefv60_pinmap[] = {
DB8500_PIN("GPIO217_AH12", gpio_in_pu_slpm_gpio_nopull, "gpio-keys.0"),
DB8500_PIN("GPIO145_C13", gpio_in_pd_slpm_gpio_nopull, "gpio-keys.0"),
DB8500_PIN("GPIO139_C9", gpio_in_pu_slpm_gpio_nopull, "gpio-keys.0"),
- /*
- * Make it possible to mux in the SKE keypad and bias the pins
- * FIXME: what's the point with this on HREFv60? KP/SKE is already
- * muxed in at another place! Enabling this will bork.
- */
- DB8500_MUX("kp_a_2", "kp", "ske"),
- DB8500_PIN("GPIO153_B17", in_pd_slpm_in_pu, "ske"), /* I7 */
- DB8500_PIN("GPIO154_C16", in_pd_slpm_in_pu, "ske"), /* I6 */
- DB8500_PIN("GPIO155_C19", in_pd_slpm_in_pu, "ske"), /* I5 */
- DB8500_PIN("GPIO156_C17", in_pd_slpm_in_pu, "ske"), /* I4 */
- DB8500_PIN("GPIO161_D21", in_pd_slpm_in_pu, "ske"), /* I3 */
- DB8500_PIN("GPIO162_D20", in_pd_slpm_in_pu, "ske"), /* I2 */
- DB8500_PIN("GPIO163_C20", in_pd_slpm_in_pu, "ske"), /* I1 */
- DB8500_PIN("GPIO164_B21", in_pd_slpm_in_pu, "ske"), /* I0 */
- DB8500_PIN("GPIO157_A18", in_pu_slpm_out_lo, "ske"), /* O7 */
- DB8500_PIN("GPIO158_C18", in_pu_slpm_out_lo, "ske"), /* O6 */
- DB8500_PIN("GPIO159_B19", in_pu_slpm_out_lo, "ske"), /* O5 */
- DB8500_PIN("GPIO160_B20", in_pu_slpm_out_lo, "ske"), /* O4 */
- DB8500_PIN("GPIO165_C21", in_pu_slpm_out_lo, "ske"), /* O3 */
- DB8500_PIN("GPIO166_A22", in_pu_slpm_out_lo, "ske"), /* O2 */
- DB8500_PIN("GPIO167_B24", in_pu_slpm_out_lo, "ske"), /* O1 */
- DB8500_PIN("GPIO168_C22", in_pu_slpm_out_lo, "ske"), /* O0 */
};
static struct pinctrl_map __initdata u9500_pinmap[] = {
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index 9c8e4a9e83ee..051b62c27102 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -11,9 +11,9 @@
#include <linux/amba/mmci.h>
#include <linux/mmc/host.h>
#include <linux/platform_device.h>
+#include <linux/platform_data/dma-ste-dma40.h>
#include <asm/mach-types.h>
-#include <plat/ste_dma40.h>
#include <mach/devices.h>
#include <mach/hardware.h>
diff --git a/arch/arm/mach-ux500/board-mop500-stuib.c b/arch/arm/mach-ux500/board-mop500-stuib.c
index 8c979770d872..564f57d5d8a7 100644
--- a/arch/arm/mach-ux500/board-mop500-stuib.c
+++ b/arch/arm/mach-ux500/board-mop500-stuib.c
@@ -162,18 +162,6 @@ static struct bu21013_platform_device tsc_plat_device = {
.y_flip = true,
};
-static struct bu21013_platform_device tsc_plat2_device = {
- .cs_en = bu21013_gpio_board_init,
- .cs_dis = bu21013_gpio_board_exit,
- .irq_read_val = bu21013_read_pin_val,
- .irq = NOMADIK_GPIO_TO_IRQ(TOUCH_GPIO_PIN),
- .touch_x_max = TOUCH_XMAX,
- .touch_y_max = TOUCH_YMAX,
- .ext_clk = false,
- .x_flip = false,
- .y_flip = true,
-};
-
static struct i2c_board_info __initdata u8500_i2c3_devices_stuib[] = {
{
I2C_BOARD_INFO("bu21013_tp", 0x5C),
@@ -181,21 +169,17 @@ static struct i2c_board_info __initdata u8500_i2c3_devices_stuib[] = {
},
{
I2C_BOARD_INFO("bu21013_tp", 0x5D),
- .platform_data = &tsc_plat2_device,
+ .platform_data = &tsc_plat_device,
},
};
void __init mop500_stuib_init(void)
{
- if (machine_is_hrefv60()) {
+ if (machine_is_hrefv60())
tsc_plat_device.cs_pin = HREFV60_TOUCH_RST_GPIO;
- tsc_plat2_device.cs_pin = HREFV60_TOUCH_RST_GPIO;
- } else {
+ else
tsc_plat_device.cs_pin = GPIO_BU21013_CS;
- tsc_plat2_device.cs_pin = GPIO_BU21013_CS;
-
- }
mop500_uib_i2c_add(0, mop500_i2c0_devices_stuib,
ARRAY_SIZE(mop500_i2c0_devices_stuib));
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 416d436111f2..d453522edb0d 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -1,6 +1,5 @@
-
/*
- * Copyright (C) 2008-2009 ST-Ericsson
+ * Copyright (C) 2008-2012 ST-Ericsson
*
* Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
*
@@ -16,6 +15,7 @@
#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/platform_data/i2c-nomadik.h>
+#include <linux/platform_data/db8500_thermal.h>
#include <linux/gpio.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl022.h>
@@ -33,18 +33,15 @@
#include <linux/smsc911x.h>
#include <linux/gpio_keys.h>
#include <linux/delay.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
#include <linux/leds.h>
#include <linux/pinctrl/consumer.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
+#include <linux/platform_data/dma-ste-dma40.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
-#include <plat/ste_dma40.h>
-#include <plat/gpio-nomadik.h>
-
#include <mach/hardware.h>
#include <mach/setup.h>
#include <mach/devices.h>
@@ -229,6 +226,67 @@ static struct ab8500_platform_data ab8500_platdata = {
};
/*
+ * Thermal Sensor
+ */
+
+static struct resource db8500_thsens_resources[] = {
+ {
+ .name = "IRQ_HOTMON_LOW",
+ .start = IRQ_PRCMU_HOTMON_LOW,
+ .end = IRQ_PRCMU_HOTMON_LOW,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "IRQ_HOTMON_HIGH",
+ .start = IRQ_PRCMU_HOTMON_HIGH,
+ .end = IRQ_PRCMU_HOTMON_HIGH,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct db8500_thsens_platform_data db8500_thsens_data = {
+ .trip_points[0] = {
+ .temp = 70000,
+ .type = THERMAL_TRIP_ACTIVE,
+ .cdev_name = {
+ [0] = "thermal-cpufreq-0",
+ },
+ },
+ .trip_points[1] = {
+ .temp = 75000,
+ .type = THERMAL_TRIP_ACTIVE,
+ .cdev_name = {
+ [0] = "thermal-cpufreq-0",
+ },
+ },
+ .trip_points[2] = {
+ .temp = 80000,
+ .type = THERMAL_TRIP_ACTIVE,
+ .cdev_name = {
+ [0] = "thermal-cpufreq-0",
+ },
+ },
+ .trip_points[3] = {
+ .temp = 85000,
+ .type = THERMAL_TRIP_CRITICAL,
+ },
+ .num_trips = 4,
+};
+
+static struct platform_device u8500_thsens_device = {
+ .name = "db8500-thermal",
+ .resource = db8500_thsens_resources,
+ .num_resources = ARRAY_SIZE(db8500_thsens_resources),
+ .dev = {
+ .platform_data = &db8500_thsens_data,
+ },
+};
+
+static struct platform_device u8500_cpufreq_cooling_device = {
+ .name = "db8500-cpufreq-cooling",
+};
+
+/*
* TPS61052
*/
@@ -464,7 +522,7 @@ static struct stedma40_chan_cfg ssp0_dma_cfg_tx = {
};
#endif
-static struct pl022_ssp_controller ssp0_plat = {
+struct pl022_ssp_controller ssp0_plat = {
.bus_id = 0,
#ifdef CONFIG_STE_DMA40
.enable_dma = 1,
@@ -541,7 +599,7 @@ static struct stedma40_chan_cfg uart2_dma_cfg_tx = {
};
#endif
-static struct amba_pl011_data uart0_plat = {
+struct amba_pl011_data uart0_plat = {
#ifdef CONFIG_STE_DMA40
.dma_filter = stedma40_filter,
.dma_rx_param = &uart0_dma_cfg_rx,
@@ -549,7 +607,7 @@ static struct amba_pl011_data uart0_plat = {
#endif
};
-static struct amba_pl011_data uart1_plat = {
+struct amba_pl011_data uart1_plat = {
#ifdef CONFIG_STE_DMA40
.dma_filter = stedma40_filter,
.dma_rx_param = &uart1_dma_cfg_rx,
@@ -557,7 +615,7 @@ static struct amba_pl011_data uart1_plat = {
#endif
};
-static struct amba_pl011_data uart2_plat = {
+struct amba_pl011_data uart2_plat = {
#ifdef CONFIG_STE_DMA40
.dma_filter = stedma40_filter,
.dma_rx_param = &uart2_dma_cfg_rx,
@@ -583,6 +641,8 @@ static struct platform_device *snowball_platform_devs[] __initdata = {
&snowball_key_dev,
&snowball_sbnet_dev,
&snowball_gpio_en_3v3_regulator_dev,
+ &u8500_thsens_device,
+ &u8500_cpufreq_cooling_device,
};
static void __init mop500_init_machine(void)
@@ -618,8 +678,6 @@ static void __init mop500_init_machine(void)
/* This board has full regulator constraints */
regulator_has_full_constraints();
-
- mop500_uib_init();
}
static void __init snowball_init_machine(void)
@@ -684,8 +742,6 @@ static void __init hrefv60_init_machine(void)
/* This board has full regulator constraints */
regulator_has_full_constraints();
-
- mop500_uib_init();
}
MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
@@ -701,155 +757,35 @@ MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
.init_late = ux500_init_late,
MACHINE_END
-MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
+MACHINE_START(U8520, "ST-Ericsson U8520 Platform HREFP520")
.atag_offset = 0x100,
- .smp = smp_ops(ux500_smp_ops),
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
.timer = &ux500_timer,
.handle_irq = gic_handle_irq,
- .init_machine = hrefv60_init_machine,
+ .init_machine = mop500_init_machine,
.init_late = ux500_init_late,
MACHINE_END
-MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
+MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
.atag_offset = 0x100,
.smp = smp_ops(ux500_smp_ops),
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
- /* we re-use nomadik timer here */
.timer = &ux500_timer,
.handle_irq = gic_handle_irq,
- .init_machine = snowball_init_machine,
+ .init_machine = hrefv60_init_machine,
.init_late = ux500_init_late,
MACHINE_END
-#ifdef CONFIG_MACH_UX500_DT
-
-struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
- /* Requires call-back bindings. */
- OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
- /* Requires DMA and call-back bindings. */
- OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat),
- OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat),
- OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", &uart2_plat),
- /* Requires DMA bindings. */
- OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0", &ssp0_plat),
- OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data),
- OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", &mop500_sdi1_data),
- OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", &mop500_sdi2_data),
- OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", &mop500_sdi4_data),
- /* Requires clock name bindings. */
- OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e000, "gpio.0", NULL),
- OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e080, "gpio.1", NULL),
- OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e000, "gpio.2", NULL),
- OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e080, "gpio.3", NULL),
- OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e100, "gpio.4", NULL),
- OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e180, "gpio.5", NULL),
- OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e000, "gpio.6", NULL),
- OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e080, "gpio.7", NULL),
- OF_DEV_AUXDATA("st,nomadik-gpio", 0xa03fe000, "gpio.8", NULL),
- OF_DEV_AUXDATA("st,nomadik-i2c", 0x80004000, "nmk-i2c.0", NULL),
- OF_DEV_AUXDATA("st,nomadik-i2c", 0x80122000, "nmk-i2c.1", NULL),
- OF_DEV_AUXDATA("st,nomadik-i2c", 0x80128000, "nmk-i2c.2", NULL),
- OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL),
- OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL),
- /* Requires device name bindings. */
- OF_DEV_AUXDATA("stericsson,nmk_pinctrl", 0, "pinctrl-db8500", NULL),
- /* Requires clock name and DMA bindings. */
- OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
- "ux500-msp-i2s.0", &msp0_platform_data),
- OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000,
- "ux500-msp-i2s.1", &msp1_platform_data),
- OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80117000,
- "ux500-msp-i2s.2", &msp2_platform_data),
- OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000,
- "ux500-msp-i2s.3", &msp3_platform_data),
- {},
-};
-
-static const struct of_device_id u8500_local_bus_nodes[] = {
- /* only create devices below soc node */
- { .compatible = "stericsson,db8500", },
- { .compatible = "stericsson,db8500-prcmu", },
- { .compatible = "simple-bus"},
- { },
-};
-
-static void __init u8500_init_machine(void)
-{
- struct device *parent = NULL;
- int i2c0_devs;
- int i;
-
- /* Pinmaps must be in place before devices register */
- if (of_machine_is_compatible("st-ericsson,mop500"))
- mop500_pinmaps_init();
- else if (of_machine_is_compatible("calaosystems,snowball-a9500"))
- snowball_pinmaps_init();
- else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
- hrefv60_pinmaps_init();
-
- parent = u8500_of_init_devices();
-
- for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
- mop500_platform_devs[i]->dev.parent = parent;
-
- /* automatically probe child nodes of db8500 device */
- of_platform_populate(NULL, u8500_local_bus_nodes, u8500_auxdata_lookup, parent);
-
- if (of_machine_is_compatible("st-ericsson,mop500")) {
- mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
-
- platform_add_devices(mop500_platform_devs,
- ARRAY_SIZE(mop500_platform_devs));
-
- mop500_sdi_init(parent);
- mop500_audio_init(parent);
- i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
- i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
- i2c_register_board_info(2, mop500_i2c2_devices,
- ARRAY_SIZE(mop500_i2c2_devices));
-
- mop500_uib_init();
-
- } else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
- mop500_of_audio_init(parent);
- } else if (of_machine_is_compatible("st-ericsson,hrefv60+")) {
- /*
- * The HREFv60 board removed a GPIO expander and routed
- * all these GPIO pins to the internal GPIO controller
- * instead.
- */
- mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
- platform_add_devices(mop500_platform_devs,
- ARRAY_SIZE(mop500_platform_devs));
-
- mop500_uib_init();
- }
-
- /* This board has full regulator constraints */
- regulator_has_full_constraints();
-}
-
-static const char * u8500_dt_board_compat[] = {
- "calaosystems,snowball-a9500",
- "st-ericsson,hrefv60+",
- "st-ericsson,u8500",
- "st-ericsson,mop500",
- NULL,
-};
-
-
-DT_MACHINE_START(U8500_DT, "ST-Ericsson U8500 platform (Device Tree Support)")
+MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
+ .atag_offset = 0x100,
.smp = smp_ops(ux500_smp_ops),
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
/* we re-use nomadik timer here */
.timer = &ux500_timer,
.handle_irq = gic_handle_irq,
- .init_machine = u8500_init_machine,
- .init_late = ux500_init_late,
- .dt_compat = u8500_dt_board_compat,
+ .init_machine = snowball_init_machine,
+ .init_late = NULL,
MACHINE_END
-#endif
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index aca39a68712a..eaa605f5d90d 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -89,6 +89,10 @@ extern struct msp_i2s_platform_data msp1_platform_data;
extern struct msp_i2s_platform_data msp2_platform_data;
extern struct msp_i2s_platform_data msp3_platform_data;
extern struct arm_pmu_platdata db8500_pmu_platdata;
+extern struct amba_pl011_data uart0_plat;
+extern struct amba_pl011_data uart1_plat;
+extern struct amba_pl011_data uart2_plat;
+extern struct pl022_ssp_controller ssp0_plat;
extern void mop500_sdi_init(struct device *parent);
extern void snowball_sdi_init(struct device *parent);
@@ -100,14 +104,8 @@ void __init mop500_pinmaps_init(void);
void __init snowball_pinmaps_init(void);
void __init hrefv60_pinmaps_init(void);
void mop500_audio_init(struct device *parent);
-/* Due for removal once the MSP driver has been fully DT:ed. */
-void mop500_of_audio_init(struct device *parent);
int __init mop500_uib_init(void);
void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
unsigned n);
-
-/* TODO: Once all pieces are DT:ed, remove completely. */
-struct device * __init u8500_of_init_devices(void);
-
#endif
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index bcdfe6b1d453..db0bb75e2c76 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -17,18 +17,27 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/mfd/abx500/ab8500.h>
+#include <linux/mfd/dbx500-prcmu.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/regulator/machine.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
+#include <linux/random.h>
#include <asm/pmu.h>
#include <asm/mach/map.h>
-#include <plat/gpio-nomadik.h>
+#include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
+
#include <mach/hardware.h>
#include <mach/setup.h>
#include <mach/devices.h>
-#include <linux/platform_data/usb-musb-ux500.h>
#include <mach/db8500-regs.h>
+#include <mach/irqs.h>
#include "devices-db8500.h"
#include "ste-dma40-db8500.h"
+#include "board-mop500.h"
/* minimum static i/o mapping required to boot U8500 platforms */
static struct map_desc u8500_uart_io_desc[] __initdata = {
@@ -158,7 +167,7 @@ static void __init db8500_add_gpios(struct device *parent)
dbx500_add_gpios(parent, ARRAY_AND_SIZE(db8500_gpio_base),
IRQ_DB8500_GPIO0, &pdata);
- dbx500_add_pinctrl(parent, "pinctrl-db8500");
+ dbx500_add_pinctrl(parent, "pinctrl-db8500", U8500_PRCMU_BASE);
}
static int usb_db8500_rx_dma_cfg[] = {
@@ -187,6 +196,8 @@ static const char *db8500_read_soc_id(void)
{
void __iomem *uid = __io_address(U8500_BB_UID_BASE);
+ /* Throw these device-specific numbers into the entropy pool */
+ add_device_randomness(uid, 0x14);
return kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x",
readl((u32 *)uid+1),
readl((u32 *)uid+1), readl((u32 *)uid+2),
@@ -214,9 +225,6 @@ struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500)
db8500_add_gpios(parent);
db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
- platform_device_register_data(parent,
- "cpufreq-u8500", -1, NULL, 0);
-
for (i = 0; i < ARRAY_SIZE(platform_devs); i++)
platform_devs[i]->dev.parent = parent;
@@ -227,18 +235,15 @@ struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500)
return parent;
}
+#ifdef CONFIG_MACH_UX500_DT
+
/* TODO: Once all pieces are DT:ed, remove completely. */
-struct device * __init u8500_of_init_devices(void)
+static struct device * __init u8500_of_init_devices(void)
{
- struct device *parent;
-
- parent = db8500_soc_device_init();
+ struct device *parent = db8500_soc_device_init();
db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
- platform_device_register_data(parent,
- "cpufreq-u8500", -1, NULL, 0);
-
u8500_dma40_device.dev.parent = parent;
/*
@@ -251,3 +256,95 @@ struct device * __init u8500_of_init_devices(void)
return parent;
}
+
+static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
+ /* Requires call-back bindings. */
+ OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
+ /* Requires DMA bindings. */
+ OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat),
+ OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat),
+ OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", &uart2_plat),
+ OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0", &ssp0_plat),
+ OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data),
+ OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", &mop500_sdi1_data),
+ OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", &mop500_sdi2_data),
+ OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", &mop500_sdi4_data),
+ /* Requires clock name bindings. */
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e000, "gpio.0", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e080, "gpio.1", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e000, "gpio.2", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e080, "gpio.3", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e100, "gpio.4", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e180, "gpio.5", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e000, "gpio.6", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e080, "gpio.7", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0xa03fe000, "gpio.8", NULL),
+ OF_DEV_AUXDATA("st,nomadik-i2c", 0x80004000, "nmk-i2c.0", NULL),
+ OF_DEV_AUXDATA("st,nomadik-i2c", 0x80122000, "nmk-i2c.1", NULL),
+ OF_DEV_AUXDATA("st,nomadik-i2c", 0x80128000, "nmk-i2c.2", NULL),
+ OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL),
+ OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL),
+ /* Requires device name bindings. */
+ OF_DEV_AUXDATA("stericsson,nmk_pinctrl", 0, "pinctrl-db8500", NULL),
+ /* Requires clock name and DMA bindings. */
+ OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
+ "ux500-msp-i2s.0", &msp0_platform_data),
+ OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000,
+ "ux500-msp-i2s.1", &msp1_platform_data),
+ OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80117000,
+ "ux500-msp-i2s.2", &msp2_platform_data),
+ OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000,
+ "ux500-msp-i2s.3", &msp3_platform_data),
+ {},
+};
+
+static const struct of_device_id u8500_local_bus_nodes[] = {
+ /* only create devices below soc node */
+ { .compatible = "stericsson,db8500", },
+ { .compatible = "stericsson,db8500-prcmu", },
+ { .compatible = "simple-bus"},
+ { },
+};
+
+static void __init u8500_init_machine(void)
+{
+ struct device *parent = NULL;
+
+ /* Pinmaps must be in place before devices register */
+ if (of_machine_is_compatible("st-ericsson,mop500"))
+ mop500_pinmaps_init();
+ else if (of_machine_is_compatible("calaosystems,snowball-a9500"))
+ snowball_pinmaps_init();
+ else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
+ hrefv60_pinmaps_init();
+ else if (of_machine_is_compatible("st-ericsson,ccu9540")) {}
+ /* TODO: Add pinmaps for ccu9540 board. */
+
+ /* TODO: Export SoC, USB, cpu-freq and DMA40 */
+ parent = u8500_of_init_devices();
+
+ /* automatically probe child nodes of db8500 device */
+ of_platform_populate(NULL, u8500_local_bus_nodes, u8500_auxdata_lookup, parent);
+}
+
+static const char * stericsson_dt_platform_compat[] = {
+ "st-ericsson,u8500",
+ "st-ericsson,u8540",
+ "st-ericsson,u9500",
+ "st-ericsson,u9540",
+ NULL,
+};
+
+DT_MACHINE_START(U8500_DT, "ST-Ericsson Ux5x0 platform (Device Tree Support)")
+ .smp = smp_ops(ux500_smp_ops),
+ .map_io = u8500_map_io,
+ .init_irq = ux500_init_irq,
+ /* we re-use nomadik timer here */
+ .timer = &ux500_timer,
+ .handle_irq = gic_handle_irq,
+ .init_machine = u8500_init_machine,
+ .init_late = NULL,
+ .dt_compat = stericsson_dt_platform_compat,
+MACHINE_END
+
+#endif
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index 1f3fbc2bb776..721e7b4275f3 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -26,6 +26,8 @@
#include <mach/setup.h>
#include <mach/devices.h>
+#include "board-mop500.h"
+
void __iomem *_PRCMU_BASE;
/*
@@ -82,6 +84,7 @@ void __init ux500_init_irq(void)
void __init ux500_init_late(void)
{
+ mop500_uib_init();
}
static const char * __init ux500_get_machine(void)
diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c
index dfdd4a54668d..16b5f71e6974 100644
--- a/arch/arm/mach-ux500/devices-common.c
+++ b/arch/arm/mach-ux500/devices-common.c
@@ -11,10 +11,10 @@
#include <linux/irq.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
-
-#include <plat/gpio-nomadik.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
#include <mach/hardware.h>
+#include <mach/irqs.h>
#include "devices-common.h"
diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h
index 7fbf0ba336e1..96fa4ac89e2e 100644
--- a/arch/arm/mach-ux500/devices-common.h
+++ b/arch/arm/mach-ux500/devices-common.h
@@ -129,12 +129,18 @@ void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num,
int irq, struct nmk_gpio_platform_data *pdata);
static inline void
-dbx500_add_pinctrl(struct device *parent, const char *name)
+dbx500_add_pinctrl(struct device *parent, const char *name,
+ resource_size_t base)
{
+ struct resource res[] = {
+ DEFINE_RES_MEM(base, SZ_8K),
+ };
struct platform_device_info pdevinfo = {
.parent = parent,
.name = name,
.id = -1,
+ .res = res,
+ .num_res = ARRAY_SIZE(res),
};
platform_device_register_full(&pdevinfo);
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index 91754a8a0d49..318d49020894 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -12,11 +12,11 @@
#include <linux/gpio.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl022.h>
-
-#include <plat/ste_dma40.h>
+#include <linux/platform_data/dma-ste-dma40.h>
#include <mach/hardware.h>
#include <mach/setup.h>
+#include <mach/irqs.h>
#include "ste-dma40-db8500.h"
diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h
index 3c8010f4fb3f..4b24c9992654 100644
--- a/arch/arm/mach-ux500/devices-db8500.h
+++ b/arch/arm/mach-ux500/devices-db8500.h
@@ -8,6 +8,7 @@
#ifndef __DEVICES_DB8500_H
#define __DEVICES_DB8500_H
+#include <mach/irqs.h>
#include "devices-common.h"
struct ske_keypad_platform_data;
diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h
index e8928548b6a3..fc77b4274c8d 100644
--- a/arch/arm/mach-ux500/include/mach/irqs.h
+++ b/arch/arm/mach-ux500/include/mach/irqs.h
@@ -46,6 +46,6 @@
#include <mach/irqs-board-mop500.h>
#endif
-#define NR_IRQS IRQ_BOARD_END
+#define UX500_NR_IRQS IRQ_BOARD_END
#endif /* ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-ux500/include/mach/msp.h b/arch/arm/mach-ux500/include/mach/msp.h
index 3cc7142eee02..9991aea3d577 100644
--- a/arch/arm/mach-ux500/include/mach/msp.h
+++ b/arch/arm/mach-ux500/include/mach/msp.h
@@ -8,7 +8,7 @@
#ifndef __MSP_H
#define __MSP_H
-#include <plat/ste_dma40.h>
+#include <linux/platform_data/dma-ste-dma40.h>
enum msp_i2s_id {
MSP_I2S_0 = 0,
diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c
index 6f39731951b0..875309acb022 100644
--- a/arch/arm/mach-ux500/timer.c
+++ b/arch/arm/mach-ux500/timer.c
@@ -9,11 +9,10 @@
#include <linux/clksrc-dbx500-prcmu.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/platform_data/clocksource-nomadik-mtu.h>
#include <asm/smp_twd.h>
-#include <plat/mtu.h>
-
#include <mach/setup.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
@@ -96,7 +95,7 @@ dt_fail:
*
*/
- nmdk_timer_init(mtu_timer_base);
+ nmdk_timer_init(mtu_timer_base, IRQ_MTU0);
clksrc_dbx500_prcmu_init(prcmu_timer_base);
ux500_twd_init();
}
diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c
index 145482e74418..78ac65f62e87 100644
--- a/arch/arm/mach-ux500/usb.c
+++ b/arch/arm/mach-ux500/usb.c
@@ -7,10 +7,10 @@
#include <linux/platform_device.h>
#include <linux/usb/musb.h>
#include <linux/dma-mapping.h>
+#include <linux/platform_data/usb-musb-ux500.h>
+#include <linux/platform_data/dma-ste-dma40.h>
-#include <plat/ste_dma40.h>
#include <mach/hardware.h>
-#include <linux/platform_data/usb-musb-ux500.h>
#define MUSB_DMA40_RX_CH { \
.mode = STEDMA40_MODE_LOGICAL, \
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 12:44:25 +0000