diff options
Diffstat (limited to 'arch/arm/mach-ux500/include')
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/db8500-regs.h | 173 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/debug-macro.S | 39 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/devices.h | 23 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/hardware.h | 47 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/irqs-board-mop500.h | 55 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/irqs-db8500.h | 150 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/irqs.h | 51 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/msp.h | 27 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/setup.h | 50 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/timex.h | 6 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/uncompress.h | 57 |
11 files changed, 0 insertions, 678 deletions
diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h deleted file mode 100644 index 1530d493879d..000000000000 --- a/arch/arm/mach-ux500/include/mach/db8500-regs.h +++ /dev/null @@ -1,173 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License terms: GNU General Public License (GPL) version 2 - */ - -#ifndef __MACH_DB8500_REGS_H -#define __MACH_DB8500_REGS_H - -/* Base address and bank offsets for ESRAM */ -#define U8500_ESRAM_BASE 0x40000000 -#define U8500_ESRAM_BANK_SIZE 0x00020000 -#define U8500_ESRAM_BANK0 U8500_ESRAM_BASE -#define U8500_ESRAM_BANK1 (U8500_ESRAM_BASE + U8500_ESRAM_BANK_SIZE) -#define U8500_ESRAM_BANK2 (U8500_ESRAM_BANK1 + U8500_ESRAM_BANK_SIZE) -#define U8500_ESRAM_BANK3 (U8500_ESRAM_BANK2 + U8500_ESRAM_BANK_SIZE) -#define U8500_ESRAM_BANK4 (U8500_ESRAM_BANK3 + U8500_ESRAM_BANK_SIZE) -/* - * on V1 DMA uses 4KB for logical parameters position is right after the 64KB - * reserved for security - */ -#define U8500_ESRAM_DMA_LCPA_OFFSET 0x10000 - -#define U8500_DMA_LCPA_BASE (U8500_ESRAM_BANK0 + U8500_ESRAM_DMA_LCPA_OFFSET) - -/* This address fulfills the 256k alignment requirement of the lcla base */ -#define U8500_DMA_LCLA_BASE U8500_ESRAM_BANK4 - -#define U8500_PER3_BASE 0x80000000 -#define U8500_STM_BASE 0x80100000 -#define U8500_STM_REG_BASE (U8500_STM_BASE + 0xF000) -#define U8500_PER2_BASE 0x80110000 -#define U8500_PER1_BASE 0x80120000 -#define U8500_B2R2_BASE 0x80130000 -#define U8500_HSEM_BASE 0x80140000 -#define U8500_PER4_BASE 0x80150000 -#define U8500_TPIU_BASE 0x80190000 -#define U8500_ICN_BASE 0x81000000 - -#define U8500_BOOT_ROM_BASE 0x90000000 -/* ASIC ID is at 0xbf4 offset within this region */ -#define U8500_ASIC_ID_BASE 0x9001D000 - -#define U9540_BOOT_ROM_BASE 0xFFFE0000 -/* ASIC ID is at 0xbf4 offset within this region */ -#define U9540_ASIC_ID_BASE 0xFFFFD000 - -#define U8500_PER6_BASE 0xa03c0000 -#define U8500_PER7_BASE 0xa03d0000 -#define U8500_PER5_BASE 0xa03e0000 - -#define U8500_SVA_BASE 0xa0100000 -#define U8500_SIA_BASE 0xa0200000 - -#define U8500_SGA_BASE 0xa0300000 -#define U8500_MCDE_BASE 0xa0350000 -#define U8500_DMA_BASE 0x801C0000 /* v1 */ - -#define U8500_SBAG_BASE 0xa0390000 - -#define U8500_SCU_BASE 0xa0410000 -#define U8500_GIC_CPU_BASE 0xa0410100 -#define U8500_TWD_BASE 0xa0410600 -#define U8500_GIC_DIST_BASE 0xa0411000 -#define U8500_L2CC_BASE 0xa0412000 - -#define U8500_MODEM_I2C 0xb7e02000 - -#define U8500_GPIO0_BASE (U8500_PER1_BASE + 0xE000) -#define U8500_GPIO1_BASE (U8500_PER3_BASE + 0xE000) -#define U8500_GPIO2_BASE (U8500_PER2_BASE + 0xE000) -#define U8500_GPIO3_BASE (U8500_PER5_BASE + 0x1E000) - -#define U8500_UART0_BASE (U8500_PER1_BASE + 0x0000) -#define U8500_UART1_BASE (U8500_PER1_BASE + 0x1000) - -/* per6 base addresses */ -#define U8500_RNG_BASE (U8500_PER6_BASE + 0x0000) -#define U8500_HASH0_BASE (U8500_PER6_BASE + 0x1000) -#define U8500_HASH1_BASE (U8500_PER6_BASE + 0x2000) -#define U8500_PKA_BASE (U8500_PER6_BASE + 0x4000) -#define U8500_PKAM_BASE (U8500_PER6_BASE + 0x5100) -#define U8500_MTU0_BASE (U8500_PER6_BASE + 0x6000) /* v1 */ -#define U8500_MTU1_BASE (U8500_PER6_BASE + 0x7000) /* v1 */ -#define U8500_CR_BASE (U8500_PER6_BASE + 0x8000) /* v1 */ -#define U8500_CRYP0_BASE (U8500_PER6_BASE + 0xa000) -#define U8500_CRYP1_BASE (U8500_PER6_BASE + 0xb000) -#define U8500_CLKRST6_BASE (U8500_PER6_BASE + 0xf000) - -/* per5 base addresses */ -#define U8500_USBOTG_BASE (U8500_PER5_BASE + 0x00000) -#define U8500_CLKRST5_BASE (U8500_PER5_BASE + 0x1f000) - -/* per4 base addresses */ -#define U8500_BACKUPRAM0_BASE (U8500_PER4_BASE + 0x00000) -#define U8500_BACKUPRAM1_BASE (U8500_PER4_BASE + 0x01000) -#define U8500_RTT0_BASE (U8500_PER4_BASE + 0x02000) -#define U8500_RTT1_BASE (U8500_PER4_BASE + 0x03000) -#define U8500_RTC_BASE (U8500_PER4_BASE + 0x04000) -#define U8500_SCR_BASE (U8500_PER4_BASE + 0x05000) -#define U8500_DMC_BASE (U8500_PER4_BASE + 0x06000) -#define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x07000) -#define U9540_DMC1_BASE (U8500_PER4_BASE + 0x0A000) -#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x68000) -#define U9540_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x6A000) -#define U8500_PRCMU_TCPM_BASE (U8500_PER4_BASE + 0x60000) -#define U8500_PRCMU_TIMER_3_BASE (U8500_PER4_BASE + 0x07338) -#define U8500_PRCMU_TIMER_4_BASE (U8500_PER4_BASE + 0x07450) - -/* per3 base addresses */ -#define U8500_FSMC_BASE (U8500_PER3_BASE + 0x0000) -#define U8500_SSP0_BASE (U8500_PER3_BASE + 0x2000) -#define U8500_SSP1_BASE (U8500_PER3_BASE + 0x3000) -#define U8500_I2C0_BASE (U8500_PER3_BASE + 0x4000) -#define U8500_SDI2_BASE (U8500_PER3_BASE + 0x5000) -#define U8500_SKE_BASE (U8500_PER3_BASE + 0x6000) -#define U8500_UART2_BASE (U8500_PER3_BASE + 0x7000) -#define U8500_SDI5_BASE (U8500_PER3_BASE + 0x8000) -#define U8500_CLKRST3_BASE (U8500_PER3_BASE + 0xf000) - -/* per2 base addresses */ -#define U8500_I2C3_BASE (U8500_PER2_BASE + 0x0000) -#define U8500_SPI2_BASE (U8500_PER2_BASE + 0x1000) -#define U8500_SPI1_BASE (U8500_PER2_BASE + 0x2000) -#define U8500_PWL_BASE (U8500_PER2_BASE + 0x3000) -#define U8500_SDI4_BASE (U8500_PER2_BASE + 0x4000) -#define U8500_MSP2_BASE (U8500_PER2_BASE + 0x7000) -#define U8500_SDI1_BASE (U8500_PER2_BASE + 0x8000) -#define U8500_SDI3_BASE (U8500_PER2_BASE + 0x9000) -#define U8500_SPI0_BASE (U8500_PER2_BASE + 0xa000) -#define U8500_HSIR_BASE (U8500_PER2_BASE + 0xb000) -#define U8500_HSIT_BASE (U8500_PER2_BASE + 0xc000) -#define U8500_CLKRST2_BASE (U8500_PER2_BASE + 0xf000) - -/* per1 base addresses */ -#define U8500_I2C1_BASE (U8500_PER1_BASE + 0x2000) -#define U8500_MSP0_BASE (U8500_PER1_BASE + 0x3000) -#define U8500_MSP1_BASE (U8500_PER1_BASE + 0x4000) -#define U8500_MSP3_BASE (U8500_PER1_BASE + 0x5000) -#define U8500_SDI0_BASE (U8500_PER1_BASE + 0x6000) -#define U8500_I2C2_BASE (U8500_PER1_BASE + 0x8000) -#define U8500_SPI3_BASE (U8500_PER1_BASE + 0x9000) -#define U8500_I2C4_BASE (U8500_PER1_BASE + 0xa000) -#define U8500_SLIM0_BASE (U8500_PER1_BASE + 0xb000) -#define U8500_CLKRST1_BASE (U8500_PER1_BASE + 0xf000) - -#define U8500_SHRM_GOP_INTERRUPT_BASE 0xB7C00040 - -#define U8500_GPIOBANK0_BASE U8500_GPIO0_BASE -#define U8500_GPIOBANK1_BASE (U8500_GPIO0_BASE + 0x80) -#define U8500_GPIOBANK2_BASE U8500_GPIO1_BASE -#define U8500_GPIOBANK3_BASE (U8500_GPIO1_BASE + 0x80) -#define U8500_GPIOBANK4_BASE (U8500_GPIO1_BASE + 0x100) -#define U8500_GPIOBANK5_BASE (U8500_GPIO1_BASE + 0x180) -#define U8500_GPIOBANK6_BASE U8500_GPIO2_BASE -#define U8500_GPIOBANK7_BASE (U8500_GPIO2_BASE + 0x80) -#define U8500_GPIOBANK8_BASE U8500_GPIO3_BASE - -#define U8500_MCDE_SIZE 0x1000 -#define U8500_DSI_LINK_SIZE 0x1000 -#define U8500_DSI_LINK1_BASE (U8500_MCDE_BASE + U8500_MCDE_SIZE) -#define U8500_DSI_LINK2_BASE (U8500_DSI_LINK1_BASE + U8500_DSI_LINK_SIZE) -#define U8500_DSI_LINK3_BASE (U8500_DSI_LINK2_BASE + U8500_DSI_LINK_SIZE) -#define U8500_DSI_LINK_COUNT 0x3 - -/* Modem and APE physical addresses */ -#define U8500_MODEM_BASE 0xe000000 -#define U8500_APE_BASE 0x6000000 - -/* SoC identification number information */ -#define U8500_BB_UID_BASE (U8500_BACKUPRAM1_BASE + 0xFC0) - -#endif diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S deleted file mode 100644 index 67035223334a..000000000000 --- a/arch/arm/mach-ux500/include/mach/debug-macro.S +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Debugging macro include header - * - * Copyright (C) 2009 ST-Ericsson - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#include <mach/hardware.h> - -#if CONFIG_UX500_DEBUG_UART > 2 -#error Invalid Ux500 debug UART -#endif - -/* - * DEBUG_LL only works if only one SOC is built in. We don't use #else below - * in order to get "__UX500_UART redefined" warnings if more than one SOC is - * built, so that there's some hint during the build that something is wrong. - */ - -#ifdef CONFIG_UX500_SOC_DB8500 -#define __UX500_UART(n) U8500_UART##n##_BASE -#endif - -#ifndef __UX500_UART -#error Unknown SOC -#endif - -#define UX500_UART(n) __UX500_UART(n) -#define UART_BASE UX500_UART(CONFIG_UX500_DEBUG_UART) - - .macro addruart, rp, rv, tmp - ldr \rp, =UART_BASE @ no, physical address - ldr \rv, =IO_ADDRESS(UART_BASE) @ yes, virtual address - .endm - -#include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-ux500/include/mach/devices.h b/arch/arm/mach-ux500/include/mach/devices.h deleted file mode 100644 index cbc6f1e4104d..000000000000 --- a/arch/arm/mach-ux500/include/mach/devices.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License terms: GNU General Public License (GPL) version 2 - */ - -#ifndef __ASM_ARCH_DEVICES_H__ -#define __ASM_ARCH_DEVICES_H__ - -struct platform_device; -struct amba_device; - -extern struct platform_device u8500_gpio_devs[]; - -extern struct amba_device ux500_pl031_device; - -extern struct platform_device ux500_hash1_device; -extern struct platform_device ux500_cryp1_device; - -extern struct platform_device u8500_dma40_device; -extern struct platform_device ux500_ske_keypad_device; - -#endif diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h deleted file mode 100644 index 5201ddace503..000000000000 --- a/arch/arm/mach-ux500/include/mach/hardware.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * Copyright (C) 2009 ST-Ericsson. - * - * U8500 hardware definitions - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#ifndef __MACH_HARDWARE_H -#define __MACH_HARDWARE_H - -/* - * Macros to get at IO space when running virtually - * We dont map all the peripherals, let ioremap do - * this for us. We map only very basic peripherals here. - */ -#define U8500_IO_VIRTUAL 0xf0000000 -#define U8500_IO_PHYSICAL 0xa0000000 -/* This is where we map in the ROM to check ASIC IDs */ -#define UX500_VIRT_ROM 0xf0000000 - -/* This macro is used in assembly, so no cast */ -#define IO_ADDRESS(x) \ - (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + U8500_IO_VIRTUAL) - -/* typesafe io address */ -#define __io_address(n) IOMEM(IO_ADDRESS(n)) - -/* Used by some plat-nomadik code */ -#define io_p2v(n) __io_address(n) - -#include <mach/db8500-regs.h> - -#define MSP_TX_RX_REG_OFFSET 0 -#define CRYP1_RX_REG_OFFSET 0x10 -#define CRYP1_TX_REG_OFFSET 0x8 -#define HASH1_TX_REG_OFFSET 0x4 - -#ifndef __ASSEMBLY__ - -extern void __iomem *_PRCMU_BASE; - -#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) - -#endif /* __ASSEMBLY__ */ -#endif /* __MACH_HARDWARE_H */ diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h deleted file mode 100644 index d526dd8e87d3..000000000000 --- a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> - * License terms: GNU General Public License (GPL) version 2 - */ - -#ifndef __MACH_IRQS_BOARD_MOP500_H -#define __MACH_IRQS_BOARD_MOP500_H - -/* Number of AB8500 irqs is taken from header file */ -#include <linux/mfd/abx500/ab8500.h> - -#define MOP500_AB8500_IRQ_BASE IRQ_BOARD_START -#define MOP500_AB8500_IRQ_END (MOP500_AB8500_IRQ_BASE \ - + AB8500_MAX_NR_IRQS) - -/* TC35892 */ -#define TC35892_NR_INTERNAL_IRQS 8 -#define TC35892_INT_GPIO(x) (TC35892_NR_INTERNAL_IRQS + (x)) -#define TC35892_NR_GPIOS 24 -#define TC35892_NR_IRQS TC35892_INT_GPIO(TC35892_NR_GPIOS) - -#define MOP500_EGPIO_NR_IRQS TC35892_NR_IRQS - -#define MOP500_EGPIO_IRQ_BASE MOP500_AB8500_IRQ_END -#define MOP500_EGPIO_IRQ_END (MOP500_EGPIO_IRQ_BASE \ - + MOP500_EGPIO_NR_IRQS) -/* STMPE1601 irqs */ -#define STMPE_NR_INTERNAL_IRQS 9 -#define STMPE_INT_GPIO(x) (STMPE_NR_INTERNAL_IRQS + (x)) -#define STMPE_NR_GPIOS 24 -#define STMPE_NR_IRQS STMPE_INT_GPIO(STMPE_NR_GPIOS) - -#define MOP500_STMPE1601_IRQBASE MOP500_EGPIO_IRQ_END -#define MOP500_STMPE1601_IRQ(x) (MOP500_STMPE1601_IRQBASE + (x)) - -#define MOP500_STMPE1601_IRQ_END \ - MOP500_STMPE1601_IRQ(STMPE_NR_INTERNAL_IRQS) - -#define MOP500_NR_IRQS MOP500_STMPE1601_IRQ_END - -#define MOP500_IRQ_END MOP500_NR_IRQS - -/* - * We may have several boards, but only one will run at a - * time, so the one with most IRQs will bump this ahead, - * but the IRQ_BOARD_START remains the same for either board. - */ -#if MOP500_IRQ_END > IRQ_BOARD_END -#undef IRQ_BOARD_END -#define IRQ_BOARD_END MOP500_IRQ_END -#endif - -#endif diff --git a/arch/arm/mach-ux500/include/mach/irqs-db8500.h b/arch/arm/mach-ux500/include/mach/irqs-db8500.h deleted file mode 100644 index 68bc14974608..000000000000 --- a/arch/arm/mach-ux500/include/mach/irqs-db8500.h +++ /dev/null @@ -1,150 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> - * License terms: GNU General Public License (GPL) version 2 - */ - -#ifndef __MACH_IRQS_DB8500_H -#define __MACH_IRQS_DB8500_H - -#define IRQ_DB8500_MTU0 (IRQ_SHPI_START + 4) -#define IRQ_DB8500_SPI2 (IRQ_SHPI_START + 6) -#define IRQ_DB8500_PMU (IRQ_SHPI_START + 7) -#define IRQ_DB8500_SPI0 (IRQ_SHPI_START + 8) -#define IRQ_DB8500_RTT (IRQ_SHPI_START + 9) -#define IRQ_DB8500_PKA (IRQ_SHPI_START + 10) -#define IRQ_DB8500_UART0 (IRQ_SHPI_START + 11) -#define IRQ_DB8500_I2C3 (IRQ_SHPI_START + 12) -#define IRQ_DB8500_L2CC (IRQ_SHPI_START + 13) -#define IRQ_DB8500_SSP0 (IRQ_SHPI_START + 14) -#define IRQ_DB8500_CRYP1 (IRQ_SHPI_START + 15) -#define IRQ_DB8500_MSP1_RX (IRQ_SHPI_START + 16) -#define IRQ_DB8500_MTU1 (IRQ_SHPI_START + 17) -#define IRQ_DB8500_RTC (IRQ_SHPI_START + 18) -#define IRQ_DB8500_UART1 (IRQ_SHPI_START + 19) -#define IRQ_DB8500_USB_WAKEUP (IRQ_SHPI_START + 20) -#define IRQ_DB8500_I2C0 (IRQ_SHPI_START + 21) -#define IRQ_DB8500_I2C1 (IRQ_SHPI_START + 22) -#define IRQ_DB8500_USBOTG (IRQ_SHPI_START + 23) -#define IRQ_DB8500_DMA_SECURE (IRQ_SHPI_START + 24) -#define IRQ_DB8500_DMA (IRQ_SHPI_START + 25) -#define IRQ_DB8500_UART2 (IRQ_SHPI_START + 26) -#define IRQ_DB8500_ICN_PMU1 (IRQ_SHPI_START + 27) -#define IRQ_DB8500_ICN_PMU2 (IRQ_SHPI_START + 28) -#define IRQ_DB8500_HSIR_EXCEP (IRQ_SHPI_START + 29) -#define IRQ_DB8500_MSP0 (IRQ_SHPI_START + 31) -#define IRQ_DB8500_HSIR_CH0_OVRRUN (IRQ_SHPI_START + 32) -#define IRQ_DB8500_HSIR_CH1_OVRRUN (IRQ_SHPI_START + 33) -#define IRQ_DB8500_HSIR_CH2_OVRRUN (IRQ_SHPI_START + 34) -#define IRQ_DB8500_HSIR_CH3_OVRRUN (IRQ_SHPI_START + 35) -#define IRQ_DB8500_HSIR_CH4_OVRRUN (IRQ_SHPI_START + 36) -#define IRQ_DB8500_HSIR_CH5_OVRRUN (IRQ_SHPI_START + 37) -#define IRQ_DB8500_HSIR_CH6_OVRRUN (IRQ_SHPI_START + 38) -#define IRQ_DB8500_HSIR_CH7_OVRRUN (IRQ_SHPI_START + 39) -#define IRQ_DB8500_AB8500 (IRQ_SHPI_START + 40) -#define IRQ_DB8500_SDMMC2 (IRQ_SHPI_START + 41) -#define IRQ_DB8500_SIA (IRQ_SHPI_START + 42) -#define IRQ_DB8500_SIA2 (IRQ_SHPI_START + 43) -#define IRQ_DB8500_SVA (IRQ_SHPI_START + 44) -#define IRQ_DB8500_SVA2 (IRQ_SHPI_START + 45) -#define IRQ_DB8500_PRCMU0 (IRQ_SHPI_START + 46) -#define IRQ_DB8500_PRCMU1 (IRQ_SHPI_START + 47) -#define IRQ_DB8500_DISP (IRQ_SHPI_START + 48) -#define IRQ_DB8500_SPI3 (IRQ_SHPI_START + 49) -#define IRQ_DB8500_SDMMC1 (IRQ_SHPI_START + 50) -#define IRQ_DB8500_I2C4 (IRQ_SHPI_START + 51) -#define IRQ_DB8500_SSP1 (IRQ_SHPI_START + 52) -#define IRQ_DB8500_SKE (IRQ_SHPI_START + 53) -#define IRQ_DB8500_KB (IRQ_SHPI_START + 54) -#define IRQ_DB8500_I2C2 (IRQ_SHPI_START + 55) -#define IRQ_DB8500_B2R2 (IRQ_SHPI_START + 56) -#define IRQ_DB8500_CRYP0 (IRQ_SHPI_START + 57) -#define IRQ_DB8500_SDMMC3 (IRQ_SHPI_START + 59) -#define IRQ_DB8500_SDMMC0 (IRQ_SHPI_START + 60) -#define IRQ_DB8500_HSEM (IRQ_SHPI_START + 61) -#define IRQ_DB8500_MSP1 (IRQ_SHPI_START + 62) -#define IRQ_DB8500_SBAG (IRQ_SHPI_START + 63) -#define IRQ_DB8500_SPI1 (IRQ_SHPI_START + 96) -#define IRQ_DB8500_SRPTIMER (IRQ_SHPI_START + 97) -#define IRQ_DB8500_MSP2 (IRQ_SHPI_START + 98) -#define IRQ_DB8500_SDMMC4 (IRQ_SHPI_START + 99) -#define IRQ_DB8500_SDMMC5 (IRQ_SHPI_START + 100) -#define IRQ_DB8500_HSIRD0 (IRQ_SHPI_START + 104) -#define IRQ_DB8500_HSIRD1 (IRQ_SHPI_START + 105) -#define IRQ_DB8500_HSITD0 (IRQ_SHPI_START + 106) -#define IRQ_DB8500_HSITD1 (IRQ_SHPI_START + 107) -#define IRQ_DB8500_CTI0 (IRQ_SHPI_START + 108) -#define IRQ_DB8500_CTI1 (IRQ_SHPI_START + 109) -#define IRQ_DB8500_ICN_ERR (IRQ_SHPI_START + 110) -#define IRQ_DB8500_MALI_PPMMU (IRQ_SHPI_START + 112) -#define IRQ_DB8500_MALI_PP (IRQ_SHPI_START + 113) -#define IRQ_DB8500_MALI_GPMMU (IRQ_SHPI_START + 114) -#define IRQ_DB8500_MALI_GP (IRQ_SHPI_START + 115) -#define IRQ_DB8500_MALI (IRQ_SHPI_START + 116) -#define IRQ_DB8500_PRCMU_SEM (IRQ_SHPI_START + 118) -#define IRQ_DB8500_GPIO0 (IRQ_SHPI_START + 119) -#define IRQ_DB8500_GPIO1 (IRQ_SHPI_START + 120) -#define IRQ_DB8500_GPIO2 (IRQ_SHPI_START + 121) -#define IRQ_DB8500_GPIO3 (IRQ_SHPI_START + 122) -#define IRQ_DB8500_GPIO4 (IRQ_SHPI_START + 123) -#define IRQ_DB8500_GPIO5 (IRQ_SHPI_START + 124) -#define IRQ_DB8500_GPIO6 (IRQ_SHPI_START + 125) -#define IRQ_DB8500_GPIO7 (IRQ_SHPI_START + 126) -#define IRQ_DB8500_GPIO8 (IRQ_SHPI_START + 127) - -#define IRQ_CA_WAKE_REQ_ED (IRQ_SHPI_START + 71) -#define IRQ_AC_READ_NOTIFICATION_0_ED (IRQ_SHPI_START + 66) -#define IRQ_AC_READ_NOTIFICATION_1_ED (IRQ_SHPI_START + 64) -#define IRQ_CA_MSG_PEND_NOTIFICATION_0_ED (IRQ_SHPI_START + 67) -#define IRQ_CA_MSG_PEND_NOTIFICATION_1_ED (IRQ_SHPI_START + 65) - -#define IRQ_CA_WAKE_REQ_V1 (IRQ_SHPI_START + 83) -#define IRQ_AC_READ_NOTIFICATION_0_V1 (IRQ_SHPI_START + 78) -#define IRQ_AC_READ_NOTIFICATION_1_V1 (IRQ_SHPI_START + 76) -#define IRQ_CA_MSG_PEND_NOTIFICATION_0_V1 (IRQ_SHPI_START + 79) -#define IRQ_CA_MSG_PEND_NOTIFICATION_1_V1 (IRQ_SHPI_START + 77) - -#ifdef CONFIG_UX500_SOC_DB8500 - -/* Virtual interrupts corresponding to the PRCMU wakeups. */ -#define IRQ_PRCMU_BASE IRQ_SOC_START -#define NUM_PRCMU_WAKEUPS (IRQ_PRCMU_END - IRQ_PRCMU_BASE) - -#define IRQ_PRCMU_RTC (IRQ_PRCMU_BASE) -#define IRQ_PRCMU_RTT0 (IRQ_PRCMU_BASE + 1) -#define IRQ_PRCMU_RTT1 (IRQ_PRCMU_BASE + 2) -#define IRQ_PRCMU_HSI0 (IRQ_PRCMU_BASE + 3) -#define IRQ_PRCMU_HSI1 (IRQ_PRCMU_BASE + 4) -#define IRQ_PRCMU_CA_WAKE (IRQ_PRCMU_BASE + 5) -#define IRQ_PRCMU_USB (IRQ_PRCMU_BASE + 6) -#define IRQ_PRCMU_ABB (IRQ_PRCMU_BASE + 7) -#define IRQ_PRCMU_ABB_FIFO (IRQ_PRCMU_BASE + 8) -#define IRQ_PRCMU_ARM (IRQ_PRCMU_BASE + 9) -#define IRQ_PRCMU_MODEM_SW_RESET_REQ (IRQ_PRCMU_BASE + 10) -#define IRQ_PRCMU_GPIO0 (IRQ_PRCMU_BASE + 11) -#define IRQ_PRCMU_GPIO1 (IRQ_PRCMU_BASE + 12) -#define IRQ_PRCMU_GPIO2 (IRQ_PRCMU_BASE + 13) -#define IRQ_PRCMU_GPIO3 (IRQ_PRCMU_BASE + 14) -#define IRQ_PRCMU_GPIO4 (IRQ_PRCMU_BASE + 15) -#define IRQ_PRCMU_GPIO5 (IRQ_PRCMU_BASE + 16) -#define IRQ_PRCMU_GPIO6 (IRQ_PRCMU_BASE + 17) -#define IRQ_PRCMU_GPIO7 (IRQ_PRCMU_BASE + 18) -#define IRQ_PRCMU_GPIO8 (IRQ_PRCMU_BASE + 19) -#define IRQ_PRCMU_CA_SLEEP (IRQ_PRCMU_BASE + 20) -#define IRQ_PRCMU_HOTMON_LOW (IRQ_PRCMU_BASE + 21) -#define IRQ_PRCMU_HOTMON_HIGH (IRQ_PRCMU_BASE + 22) -#define IRQ_PRCMU_END (IRQ_PRCMU_BASE + 23) - -/* - * We may have several SoCs, but only one will run at a - * time, so the one with most IRQs will bump this ahead, - * but the IRQ_SOC_START remains the same for either SoC. - */ -#if IRQ_SOC_END < IRQ_PRCMU_END -#undef IRQ_SOC_END -#define IRQ_SOC_END IRQ_PRCMU_END -#endif - -#endif /* CONFIG_UX500_SOC_DB8500 */ -#endif diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h deleted file mode 100644 index fc77b4274c8d..000000000000 --- a/arch/arm/mach-ux500/include/mach/irqs.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * Copyright (C) 2008 STMicroelectronics - * Copyright (C) 2009 ST-Ericsson. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ -#ifndef ASM_ARCH_IRQS_H -#define ASM_ARCH_IRQS_H - -#include <mach/hardware.h> - -#define IRQ_LOCALTIMER 29 -#define IRQ_LOCALWDOG 30 - -/* Shared Peripheral Interrupt (SHPI) */ -#define IRQ_SHPI_START 32 - -/* - * MTU0 preserved for now until plat-nomadik is taught not to use it. Don't - * add any other IRQs here, use the irqs-dbx500.h files. - */ -#define IRQ_MTU0 (IRQ_SHPI_START + 4) - -#define DBX500_NR_INTERNAL_IRQS 166 - -/* After chip-specific IRQ numbers we have the GPIO ones */ -#define NOMADIK_NR_GPIO 288 -#define NOMADIK_GPIO_TO_IRQ(gpio) ((gpio) + DBX500_NR_INTERNAL_IRQS) -#define NOMADIK_IRQ_TO_GPIO(irq) ((irq) - DBX500_NR_INTERNAL_IRQS) -#define IRQ_GPIO_END NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO) - -#define IRQ_SOC_START IRQ_GPIO_END -/* This will be overridden by SoC-specific irq headers */ -#define IRQ_SOC_END IRQ_SOC_START - -#include <mach/irqs-db8500.h> - -#define IRQ_BOARD_START IRQ_SOC_END -/* This will be overridden by board-specific irq headers */ -#define IRQ_BOARD_END IRQ_BOARD_START - -#ifdef CONFIG_MACH_MOP500 -#include <mach/irqs-board-mop500.h> -#endif - -#define UX500_NR_IRQS IRQ_BOARD_END - -#endif /* ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-ux500/include/mach/msp.h b/arch/arm/mach-ux500/include/mach/msp.h deleted file mode 100644 index 9991aea3d577..000000000000 --- a/arch/arm/mach-ux500/include/mach/msp.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * License terms: GNU General Public License (GPL), version 2. - */ - -#ifndef __MSP_H -#define __MSP_H - -#include <linux/platform_data/dma-ste-dma40.h> - -enum msp_i2s_id { - MSP_I2S_0 = 0, - MSP_I2S_1, - MSP_I2S_2, - MSP_I2S_3, -}; - -/* Platform data structure for a MSP I2S-device */ -struct msp_i2s_platform_data { - enum msp_i2s_id id; - struct stedma40_chan_cfg *msp_i2s_dma_rx; - struct stedma40_chan_cfg *msp_i2s_dma_tx; -}; - -#endif diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h deleted file mode 100644 index bddce2b49372..000000000000 --- a/arch/arm/mach-ux500/include/mach/setup.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * Copyright (C) 2009 ST-Ericsson. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * These symbols are needed for board-specific files to call their - * own cpu-specific files - */ -#ifndef __ASM_ARCH_SETUP_H -#define __ASM_ARCH_SETUP_H - -#include <asm/mach/time.h> -#include <linux/init.h> -#include <linux/mfd/abx500/ab8500.h> - -void __init ux500_map_io(void); -extern void __init u8500_map_io(void); - -extern struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500); - -extern void __init ux500_init_irq(void); -extern void __init ux500_init_late(void); - -extern struct device *ux500_soc_device_init(const char *soc_id); - -struct amba_device; -extern void __init amba_add_devices(struct amba_device *devs[], int num); - -extern void ux500_timer_init(void); - -#define __IO_DEV_DESC(x, sz) { \ - .virtual = IO_ADDRESS(x), \ - .pfn = __phys_to_pfn(x), \ - .length = sz, \ - .type = MT_DEVICE, \ -} - -#define __MEM_DEV_DESC(x, sz) { \ - .virtual = IO_ADDRESS(x), \ - .pfn = __phys_to_pfn(x), \ - .length = sz, \ - .type = MT_MEMORY, \ -} - -extern struct smp_operations ux500_smp_ops; -extern void ux500_cpu_die(unsigned int cpu); - -#endif /* __ASM_ARCH_SETUP_H */ diff --git a/arch/arm/mach-ux500/include/mach/timex.h b/arch/arm/mach-ux500/include/mach/timex.h deleted file mode 100644 index d0942c174018..000000000000 --- a/arch/arm/mach-ux500/include/mach/timex.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -#define CLOCK_TICK_RATE 110000000 - -#endif diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h deleted file mode 100644 index 36969d52e53a..000000000000 --- a/arch/arm/mach-ux500/include/mach/uncompress.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * Copyright (C) 2009 ST-Ericsson - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <linux/io.h> -#include <linux/amba/serial.h> -#include <mach/hardware.h> - -void __iomem *ux500_uart_base; - -static void putc(const char c) -{ - /* Do nothing if the UART is not enabled. */ - if (!(__raw_readb(ux500_uart_base + UART011_CR) & 0x1)) - return; - - if (c == '\n') - putc('\r'); - - while (__raw_readb(ux500_uart_base + UART01x_FR) & (1 << 5)) - barrier(); - __raw_writeb(c, ux500_uart_base + UART01x_DR); -} - -static void flush(void) -{ - if (!(__raw_readb(ux500_uart_base + UART011_CR) & 0x1)) - return; - while (__raw_readb(ux500_uart_base + UART01x_FR) & (1 << 3)) - barrier(); -} - -static inline void arch_decomp_setup(void) -{ - /* Use machine_is_foo() macro if you need to switch base someday */ - ux500_uart_base = (void __iomem *)U8500_UART2_BASE; -} - -#endif /* __ASM_ARCH_UNCOMPRESS_H */ |