diff options
Diffstat (limited to 'arch/arm/mach-ux500/cpu-db8500.c')
| -rw-r--r-- | arch/arm/mach-ux500/cpu-db8500.c | 139 |
1 files changed, 88 insertions, 51 deletions
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index a557955472ea..46b1da1bf5d2 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -12,41 +12,107 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/amba/bus.h> +#include <linux/init.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/irqchip.h> +#include <linux/irqchip/arm-gic.h> +#include <linux/mfd/dbx500-prcmu.h> +#include <linux/platform_data/arm-ux500-pm.h> #include <linux/platform_device.h> #include <linux/io.h> -#include <linux/mfd/abx500/ab8500.h> -#include <linux/mfd/dbx500-prcmu.h> #include <linux/of.h> +#include <linux/of_address.h> #include <linux/of_platform.h> #include <linux/perf/arm_pmu.h> #include <linux/regulator/machine.h> -#include <linux/random.h> +#include <asm/outercache.h> +#include <asm/hardware/cache-l2x0.h> #include <asm/mach/map.h> +#include <asm/mach/arch.h> #include "setup.h" -#include "board-mop500-regulators.h" #include "board-mop500.h" #include "db8500-regs.h" -#include "id.h" -static struct ab8500_platform_data ab8500_platdata = { - .regulator = &ab8500_regulator_plat_data, -}; +static int __init ux500_l2x0_unlock(void) +{ + int i; + struct device_node *np; + void __iomem *l2x0_base; -static struct prcmu_pdata db8500_prcmu_pdata = { - .ab_platdata = &ab8500_platdata, - .version_offset = DB8500_PRCMU_FW_VERSION_OFFSET, - .legacy_offset = DB8500_PRCMU_LEGACY_OFFSET, -}; + np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache"); + l2x0_base = of_iomap(np, 0); + of_node_put(np); + if (!l2x0_base) + return -ENODEV; + + /* + * Unlock Data and Instruction Lock if locked. Ux500 U-Boot versions + * apparently locks both caches before jumping to the kernel. The + * l2x0 core will not touch the unlock registers if the l2x0 is + * already enabled, so we do it right here instead. The PL310 has + * 8 sets of registers, one per possible CPU. + */ + for (i = 0; i < 8; i++) { + writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE + + i * L2X0_LOCKDOWN_STRIDE); + writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE + + i * L2X0_LOCKDOWN_STRIDE); + } + iounmap(l2x0_base); + return 0; +} + +static void ux500_l2c310_write_sec(unsigned long val, unsigned reg) +{ + /* + * We can't write to secure registers as we are in non-secure + * mode, until we have some SMI service available. + */ +} -static void __init u8500_map_io(void) +/* + * FIXME: Should we set up the GPIO domain here? + * + * The problem is that we cannot put the interrupt resources into the platform + * device until the irqdomain has been added. Right now, we set the GIC interrupt + * domain from init_irq(), then load the gpio driver from + * core_initcall(nmk_gpio_init) and add the platform devices from + * arch_initcall(customize_machine). + * + * This feels fragile because it depends on the gpio device getting probed + * _before_ any device uses the gpio interrupts. +*/ +static void __init ux500_init_irq(void) +{ + struct device_node *np; + struct resource r; + + irqchip_init(); + np = of_find_compatible_node(NULL, NULL, "stericsson,db8500-prcmu"); + of_address_to_resource(np, 0, &r); + of_node_put(np); + if (!r.start) { + pr_err("could not find PRCMU base resource\n"); + return; + } + prcmu_early_init(r.start, r.end-r.start); + ux500_pm_init(r.start, r.end-r.start); + + /* Unlock before init */ + ux500_l2x0_unlock(); + outer_cache.write_sec = ux500_l2c310_write_sec; +} + +static void ux500_restart(enum reboot_mode mode, const char *cmd) { - debug_ll_io_init(); - ux500_setup_id(); + local_irq_disable(); + local_fiq_disable(); + + prcmu_system_reset(0); } /* @@ -73,31 +139,6 @@ static struct arm_pmu_platdata db8500_pmu_platdata = { .handle_irq = db8500_pmu_handler, }; -static const char *db8500_read_soc_id(void) -{ - void __iomem *uid; - const char *retstr; - - uid = ioremap(U8500_BB_UID_BASE, 0x20); - if (!uid) - return NULL; - /* Throw these device-specific numbers into the entropy pool */ - add_device_randomness(uid, 0x14); - retstr = kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x", - readl((u32 *)uid+0), - readl((u32 *)uid+1), readl((u32 *)uid+2), - readl((u32 *)uid+3), readl((u32 *)uid+4)); - iounmap(uid); - return retstr; -} - -static struct device * __init db8500_soc_device_init(void) -{ - const char *soc_id = db8500_read_soc_id(); - - return ux500_soc_device_init(soc_id); -} - static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { /* Requires call-back bindings. */ OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata), @@ -111,8 +152,7 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000, "ux500-msp-i2s.3", &msp3_platform_data), /* Requires non-DT:able platform data. */ - OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", - &db8500_prcmu_pdata), + OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", NULL), OF_DEV_AUXDATA("stericsson,ux500-cryp", 0xa03cb000, "cryp1", NULL), OF_DEV_AUXDATA("stericsson,ux500-hash", 0xa03c2000, "hash1", NULL), OF_DEV_AUXDATA("stericsson,snd-soc-mop500", 0, "snd-soc-mop500.0", @@ -121,8 +161,7 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { }; static struct of_dev_auxdata u8540_auxdata_lookup[] __initdata = { - OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", - &db8500_prcmu_pdata), + OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", NULL), {}, }; @@ -136,15 +175,13 @@ static const struct of_device_id u8500_local_bus_nodes[] = { static void __init u8500_init_machine(void) { - struct device *parent = db8500_soc_device_init(); - /* automatically probe child nodes of dbx5x0 devices */ if (of_machine_is_compatible("st-ericsson,u8540")) of_platform_populate(NULL, u8500_local_bus_nodes, - u8540_auxdata_lookup, parent); + u8540_auxdata_lookup, NULL); else of_platform_populate(NULL, u8500_local_bus_nodes, - u8500_auxdata_lookup, parent); + u8500_auxdata_lookup, NULL); } static const char * stericsson_dt_platform_compat[] = { @@ -156,10 +193,10 @@ static const char * stericsson_dt_platform_compat[] = { }; DT_MACHINE_START(U8500_DT, "ST-Ericsson Ux5x0 platform (Device Tree Support)") - .map_io = u8500_map_io, + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .init_irq = ux500_init_irq, .init_machine = u8500_init_machine, - .init_late = NULL, .dt_compat = stericsson_dt_platform_compat, .restart = ux500_restart, MACHINE_END |