diff options
Diffstat (limited to 'arch/arm/mach-sa1100')
| -rw-r--r-- | arch/arm/mach-sa1100/collie.c | 33 | ||||
| -rw-r--r-- | arch/arm/mach-sa1100/h3100.c | 7 | ||||
| -rw-r--r-- | arch/arm/mach-sa1100/h3600.c | 7 | ||||
| -rw-r--r-- | arch/arm/mach-sa1100/h3xxx.c | 58 | ||||
| -rw-r--r-- | arch/arm/mach-sa1100/include/mach/collie.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-sa1100/include/mach/h3xxx.h | 11 | ||||
| -rw-r--r-- | arch/arm/mach-sa1100/time.c | 2 |
7 files changed, 62 insertions, 58 deletions
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index 831a15824ec8..f9874ba60cc8 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -43,6 +43,7 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/map.h> +#include <asm/mach/irda.h> #include <asm/hardware/scoop.h> #include <asm/mach/sharpsl_param.h> @@ -96,6 +97,37 @@ static struct mcp_plat_data collie_mcp_data = { .codec_pdata = &collie_ucb1x00_data, }; +static int collie_ir_startup(struct device *dev) +{ + int rc = gpio_request(COLLIE_GPIO_IR_ON, "IrDA"); + if (rc) + return rc; + rc = gpio_direction_output(COLLIE_GPIO_IR_ON, 1); + + if (!rc) + return 0; + + gpio_free(COLLIE_GPIO_IR_ON); + return rc; +} + +static void collie_ir_shutdown(struct device *dev) +{ + gpio_free(COLLIE_GPIO_IR_ON); +} + +static int collie_ir_set_power(struct device *dev, unsigned int state) +{ + gpio_set_value(COLLIE_GPIO_IR_ON, !state); + return 0; +} + +static struct irda_platform_data collie_ir_data = { + .startup = collie_ir_startup, + .shutdown = collie_ir_shutdown, + .set_power = collie_ir_set_power, +}; + /* * Collie AC IN */ @@ -400,6 +432,7 @@ static void __init collie_init(void) sa11x0_register_mtd(&collie_flash_data, collie_flash_resources, ARRAY_SIZE(collie_flash_resources)); sa11x0_register_mcp(&collie_mcp_data); + sa11x0_register_irda(&collie_ir_data); sharpsl_save_param(); } diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c index daa27c474c13..3c43219bc881 100644 --- a/arch/arm/mach-sa1100/h3100.c +++ b/arch/arm/mach-sa1100/h3100.c @@ -122,15 +122,8 @@ static struct irda_platform_data h3100_irda_data = { .shutdown = h3100_irda_shutdown, }; -static struct gpio_default_state h3100_default_gpio[] = { - { H3XXX_GPIO_COM_DCD, GPIO_MODE_IN, "COM DCD" }, - { H3XXX_GPIO_COM_CTS, GPIO_MODE_IN, "COM CTS" }, - { H3XXX_GPIO_COM_RTS, GPIO_MODE_OUT0, "COM RTS" }, -}; - static void __init h3100_mach_init(void) { - h3xxx_init_gpio(h3100_default_gpio, ARRAY_SIZE(h3100_default_gpio)); h3xxx_mach_init(); sa11x0_register_lcd(&h3100_lcd_info); diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c index a663e7230141..5be54c214c7c 100644 --- a/arch/arm/mach-sa1100/h3600.c +++ b/arch/arm/mach-sa1100/h3600.c @@ -130,15 +130,8 @@ static struct irda_platform_data h3600_irda_data = { .shutdown = h3600_irda_shutdown, }; -static struct gpio_default_state h3600_default_gpio[] = { - { H3XXX_GPIO_COM_DCD, GPIO_MODE_IN, "COM DCD" }, - { H3XXX_GPIO_COM_CTS, GPIO_MODE_IN, "COM CTS" }, - { H3XXX_GPIO_COM_RTS, GPIO_MODE_OUT0, "COM RTS" }, -}; - static void __init h3600_mach_init(void) { - h3xxx_init_gpio(h3600_default_gpio, ARRAY_SIZE(h3600_default_gpio)); h3xxx_mach_init(); sa11x0_register_lcd(&h3600_lcd_info); diff --git a/arch/arm/mach-sa1100/h3xxx.c b/arch/arm/mach-sa1100/h3xxx.c index f17e7382242a..c79bf467fb7f 100644 --- a/arch/arm/mach-sa1100/h3xxx.c +++ b/arch/arm/mach-sa1100/h3xxx.c @@ -28,37 +28,6 @@ #include "generic.h" -void h3xxx_init_gpio(struct gpio_default_state *s, size_t n) -{ - while (n--) { - const char *name = s->name; - int err; - - if (!name) - name = "[init]"; - err = gpio_request(s->gpio, name); - if (err) { - printk(KERN_ERR "gpio%u: unable to request: %d\n", - s->gpio, err); - continue; - } - if (s->mode >= 0) { - err = gpio_direction_output(s->gpio, s->mode); - } else { - err = gpio_direction_input(s->gpio); - } - if (err) { - printk(KERN_ERR "gpio%u: unable to set direction: %d\n", - s->gpio, err); - continue; - } - if (!s->name) - gpio_free(s->gpio); - s++; - } -} - - /* * H3xxx flash support */ @@ -116,9 +85,34 @@ static struct resource h3xxx_flash_resource = /* * H3xxx uart support */ +static struct gpio h3xxx_uart_gpio[] = { + { H3XXX_GPIO_COM_DCD, GPIOF_IN, "COM DCD" }, + { H3XXX_GPIO_COM_CTS, GPIOF_IN, "COM CTS" }, + { H3XXX_GPIO_COM_RTS, GPIOF_OUT_INIT_LOW, "COM RTS" }, +}; + +static bool h3xxx_uart_request_gpios(void) +{ + static bool h3xxx_uart_gpio_ok; + int rc; + + if (h3xxx_uart_gpio_ok) + return true; + + rc = gpio_request_array(h3xxx_uart_gpio, ARRAY_SIZE(h3xxx_uart_gpio)); + if (rc) + pr_err("h3xxx_uart_request_gpios: error %d\n", rc); + else + h3xxx_uart_gpio_ok = true; + + return h3xxx_uart_gpio_ok; +} + static void h3xxx_uart_set_mctrl(struct uart_port *port, u_int mctrl) { if (port->mapbase == _Ser3UTCR0) { + if (!h3xxx_uart_request_gpios()) + return; gpio_set_value(H3XXX_GPIO_COM_RTS, !(mctrl & TIOCM_RTS)); } } @@ -128,6 +122,8 @@ static u_int h3xxx_uart_get_mctrl(struct uart_port *port) u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR; if (port->mapbase == _Ser3UTCR0) { + if (!h3xxx_uart_request_gpios()) + return ret; /* * DCD and CTS bits are inverted in GPLR by RS232 transceiver */ diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h index 50e1d850ee2e..b478ca180c19 100644 --- a/arch/arm/mach-sa1100/include/mach/collie.h +++ b/arch/arm/mach-sa1100/include/mach/collie.h @@ -80,7 +80,7 @@ extern void locomolcd_power(int on); #define COLLIE_TC35143_GPIO_VERSION0 UCB_IO_0 #define COLLIE_TC35143_GPIO_TBL_CHK UCB_IO_1 #define COLLIE_TC35143_GPIO_VPEN_ON UCB_IO_2 -#define COLLIE_TC35143_GPIO_IR_ON UCB_IO_3 +#define COLLIE_GPIO_IR_ON (COLLIE_TC35143_GPIO_BASE + 3) #define COLLIE_TC35143_GPIO_AMP_ON UCB_IO_4 #define COLLIE_TC35143_GPIO_VERSION1 UCB_IO_5 #define COLLIE_TC35143_GPIO_FS8KLPF UCB_IO_5 diff --git a/arch/arm/mach-sa1100/include/mach/h3xxx.h b/arch/arm/mach-sa1100/include/mach/h3xxx.h index c810620db53d..603d4343f7f6 100644 --- a/arch/arm/mach-sa1100/include/mach/h3xxx.h +++ b/arch/arm/mach-sa1100/include/mach/h3xxx.h @@ -79,17 +79,6 @@ #define H3600_EGPIO_LCD_5V_ON (H3XXX_EGPIO_BASE + 14) /* enable 5V to LCD. active high. */ #define H3600_EGPIO_LVDD_ON (H3XXX_EGPIO_BASE + 15) /* enable 9V and -6.5V to LCD. */ -struct gpio_default_state { - int gpio; - int mode; - const char *name; -}; - -#define GPIO_MODE_IN -1 -#define GPIO_MODE_OUT0 0 -#define GPIO_MODE_OUT1 1 - -void h3xxx_init_gpio(struct gpio_default_state *s, size_t n); void __init h3xxx_map_io(void); void __init h3xxx_mach_init(void); diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c index 6fd4acb8f187..4852c08cb526 100644 --- a/arch/arm/mach-sa1100/time.c +++ b/arch/arm/mach-sa1100/time.c @@ -112,7 +112,7 @@ static struct clock_event_device ckevt_sa1100_osmr0 = { static struct irqaction sa1100_timer_irq = { .name = "ost0", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .flags = IRQF_TIMER | IRQF_IRQPOLL, .handler = sa1100_ost0_interrupt, .dev_id = &ckevt_sa1100_osmr0, }; |