diff options
Diffstat (limited to 'arch/arm/mach-sa1100/assabet.c')
| -rw-r--r-- | arch/arm/mach-sa1100/assabet.c | 39 |
1 files changed, 38 insertions, 1 deletions
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index f68241d995f2..575ec085cffa 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -14,8 +14,11 @@ #include <linux/module.h> #include <linux/errno.h> #include <linux/gpio/gpio-reg.h> +#include <linux/gpio/machine.h> #include <linux/ioport.h> #include <linux/platform_data/sa11x0-serial.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/serial_core.h> #include <linux/platform_device.h> #include <linux/mfd/ucb1x00.h> @@ -445,6 +448,29 @@ static struct resource neponset_resources[] = { }; #endif +static struct gpiod_lookup_table assabet_cf_gpio_table = { + .dev_id = "sa11x0-pcmcia.1", + .table = { + GPIO_LOOKUP("gpio", 21, "ready", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio", 22, "detect", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("gpio", 24, "bvd2", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio", 25, "bvd1", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("assabet", 1, "reset", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("assabet", 7, "bus-enable", GPIO_ACTIVE_LOW), + { }, + }, +}; + +static struct regulator_consumer_supply assabet_cf_vcc_consumers[] = { + REGULATOR_SUPPLY("vcc", "sa11x0-pcmcia.1"), +}; + +static struct fixed_voltage_config assabet_cf_vcc_pdata __initdata = { + .supply_name = "cf-power", + .microvolts = 3300000, + .enable_high = 1, +}; + static void __init assabet_init(void) { /* @@ -490,6 +516,11 @@ static void __init assabet_init(void) platform_device_register_simple("neponset", 0, neponset_resources, ARRAY_SIZE(neponset_resources)); #endif + } else { + sa11x0_register_fixed_regulator(0, &assabet_cf_vcc_pdata, + assabet_cf_vcc_consumers, + ARRAY_SIZE(assabet_cf_vcc_consumers)); + } #ifndef ASSABET_PAL_VIDEO @@ -501,6 +532,9 @@ static void __init assabet_init(void) ARRAY_SIZE(assabet_flash_resources)); sa11x0_register_irda(&assabet_irda_data); sa11x0_register_mcp(&assabet_mcp_data); + + if (!machine_has_neponset()) + sa11x0_register_pcmcia(1, &assabet_cf_gpio_table); } /* @@ -768,6 +802,7 @@ fs_initcall(assabet_leds_init); void __init assabet_init_irq(void) { + unsigned int assabet_gpio_base; u32 def_val; sa1100_init_irq(); @@ -782,7 +817,9 @@ void __init assabet_init_irq(void) * * This must precede any driver calls to BCR_set() or BCR_clear(). */ - assabet_init_gpio((void *)&ASSABET_BCR, def_val); + assabet_gpio_base = assabet_init_gpio((void *)&ASSABET_BCR, def_val); + + assabet_cf_vcc_pdata.gpio = assabet_gpio_base + 0; } MACHINE_START(ASSABET, "Intel-Assabet") |