diff options
Diffstat (limited to 'arch/arm/mach-s5pv210/cpufreq.c')
| -rw-r--r-- | arch/arm/mach-s5pv210/cpufreq.c | 485 |
1 files changed, 0 insertions, 485 deletions
diff --git a/arch/arm/mach-s5pv210/cpufreq.c b/arch/arm/mach-s5pv210/cpufreq.c deleted file mode 100644 index 153af8b359ec..000000000000 --- a/arch/arm/mach-s5pv210/cpufreq.c +++ /dev/null @@ -1,485 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/cpufreq.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * CPU frequency scaling for S5PC110/S5PV210 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/cpufreq.h> - -#include <mach/map.h> -#include <mach/regs-clock.h> - -static struct clk *cpu_clk; -static struct clk *dmc0_clk; -static struct clk *dmc1_clk; -static struct cpufreq_freqs freqs; - -/* APLL M,P,S values for 1G/800Mhz */ -#define APLL_VAL_1000 ((1 << 31) | (125 << 16) | (3 << 8) | 1) -#define APLL_VAL_800 ((1 << 31) | (100 << 16) | (3 << 8) | 1) - -/* - * DRAM configurations to calculate refresh counter for changing - * frequency of memory. - */ -struct dram_conf { - unsigned long freq; /* HZ */ - unsigned long refresh; /* DRAM refresh counter * 1000 */ -}; - -/* DRAM configuration (DMC0 and DMC1) */ -static struct dram_conf s5pv210_dram_conf[2]; - -enum perf_level { - L0, L1, L2, L3, L4, -}; - -enum s5pv210_mem_type { - LPDDR = 0x1, - LPDDR2 = 0x2, - DDR2 = 0x4, -}; - -enum s5pv210_dmc_port { - DMC0 = 0, - DMC1, -}; - -static struct cpufreq_frequency_table s5pv210_freq_table[] = { - {L0, 1000*1000}, - {L1, 800*1000}, - {L2, 400*1000}, - {L3, 200*1000}, - {L4, 100*1000}, - {0, CPUFREQ_TABLE_END}, -}; - -static u32 clkdiv_val[5][11] = { - /* - * Clock divider value for following - * { APLL, A2M, HCLK_MSYS, PCLK_MSYS, - * HCLK_DSYS, PCLK_DSYS, HCLK_PSYS, PCLK_PSYS, - * ONEDRAM, MFC, G3D } - */ - - /* L0 : [1000/200/100][166/83][133/66][200/200] */ - {0, 4, 4, 1, 3, 1, 4, 1, 3, 0, 0}, - - /* L1 : [800/200/100][166/83][133/66][200/200] */ - {0, 3, 3, 1, 3, 1, 4, 1, 3, 0, 0}, - - /* L2 : [400/200/100][166/83][133/66][200/200] */ - {1, 3, 1, 1, 3, 1, 4, 1, 3, 0, 0}, - - /* L3 : [200/200/100][166/83][133/66][200/200] */ - {3, 3, 1, 1, 3, 1, 4, 1, 3, 0, 0}, - - /* L4 : [100/100/100][83/83][66/66][100/100] */ - {7, 7, 0, 0, 7, 0, 9, 0, 7, 0, 0}, -}; - -/* - * This function set DRAM refresh counter - * accoriding to operating frequency of DRAM - * ch: DMC port number 0 or 1 - * freq: Operating frequency of DRAM(KHz) - */ -static void s5pv210_set_refresh(enum s5pv210_dmc_port ch, unsigned long freq) -{ - unsigned long tmp, tmp1; - void __iomem *reg = NULL; - - if (ch == DMC0) { - reg = (S5P_VA_DMC0 + 0x30); - } else if (ch == DMC1) { - reg = (S5P_VA_DMC1 + 0x30); - } else { - printk(KERN_ERR "Cannot find DMC port\n"); - return; - } - - /* Find current DRAM frequency */ - tmp = s5pv210_dram_conf[ch].freq; - - do_div(tmp, freq); - - tmp1 = s5pv210_dram_conf[ch].refresh; - - do_div(tmp1, tmp); - - __raw_writel(tmp1, reg); -} - -int s5pv210_verify_speed(struct cpufreq_policy *policy) -{ - if (policy->cpu) - return -EINVAL; - - return cpufreq_frequency_table_verify(policy, s5pv210_freq_table); -} - -unsigned int s5pv210_getspeed(unsigned int cpu) -{ - if (cpu) - return 0; - - return clk_get_rate(cpu_clk) / 1000; -} - -static int s5pv210_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned long reg; - unsigned int index, priv_index; - unsigned int pll_changing = 0; - unsigned int bus_speed_changing = 0; - - freqs.old = s5pv210_getspeed(0); - - if (cpufreq_frequency_table_target(policy, s5pv210_freq_table, - target_freq, relation, &index)) - return -EINVAL; - - freqs.new = s5pv210_freq_table[index].frequency; - freqs.cpu = 0; - - if (freqs.new == freqs.old) - return 0; - - /* Finding current running level index */ - if (cpufreq_frequency_table_target(policy, s5pv210_freq_table, - freqs.old, relation, &priv_index)) - return -EINVAL; - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - if (freqs.new > freqs.old) { - /* Voltage up: will be implemented */ - } - - /* Check if there need to change PLL */ - if ((index == L0) || (priv_index == L0)) - pll_changing = 1; - - /* Check if there need to change System bus clock */ - if ((index == L4) || (priv_index == L4)) - bus_speed_changing = 1; - - if (bus_speed_changing) { - /* - * Reconfigure DRAM refresh counter value for minimum - * temporary clock while changing divider. - * expected clock is 83Mhz : 7.8usec/(1/83Mhz) = 0x287 - */ - if (pll_changing) - s5pv210_set_refresh(DMC1, 83000); - else - s5pv210_set_refresh(DMC1, 100000); - - s5pv210_set_refresh(DMC0, 83000); - } - - /* - * APLL should be changed in this level - * APLL -> MPLL(for stable transition) -> APLL - * Some clock source's clock API are not prepared. - * Do not use clock API in below code. - */ - if (pll_changing) { - /* - * 1. Temporary Change divider for MFC and G3D - * SCLKA2M(200/1=200)->(200/4=50)Mhz - */ - reg = __raw_readl(S5P_CLK_DIV2); - reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK); - reg |= (3 << S5P_CLKDIV2_G3D_SHIFT) | - (3 << S5P_CLKDIV2_MFC_SHIFT); - __raw_writel(reg, S5P_CLK_DIV2); - - /* For MFC, G3D dividing */ - do { - reg = __raw_readl(S5P_CLKDIV_STAT0); - } while (reg & ((1 << 16) | (1 << 17))); - - /* - * 2. Change SCLKA2M(200Mhz)to SCLKMPLL in MFC_MUX, G3D MUX - * (200/4=50)->(667/4=166)Mhz - */ - reg = __raw_readl(S5P_CLK_SRC2); - reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK); - reg |= (1 << S5P_CLKSRC2_G3D_SHIFT) | - (1 << S5P_CLKSRC2_MFC_SHIFT); - __raw_writel(reg, S5P_CLK_SRC2); - - do { - reg = __raw_readl(S5P_CLKMUX_STAT1); - } while (reg & ((1 << 7) | (1 << 3))); - - /* - * 3. DMC1 refresh count for 133Mhz if (index == L4) is - * true refresh counter is already programed in upper - * code. 0x287@83Mhz - */ - if (!bus_speed_changing) - s5pv210_set_refresh(DMC1, 133000); - - /* 4. SCLKAPLL -> SCLKMPLL */ - reg = __raw_readl(S5P_CLK_SRC0); - reg &= ~(S5P_CLKSRC0_MUX200_MASK); - reg |= (0x1 << S5P_CLKSRC0_MUX200_SHIFT); - __raw_writel(reg, S5P_CLK_SRC0); - - do { - reg = __raw_readl(S5P_CLKMUX_STAT0); - } while (reg & (0x1 << 18)); - - } - - /* Change divider */ - reg = __raw_readl(S5P_CLK_DIV0); - - reg &= ~(S5P_CLKDIV0_APLL_MASK | S5P_CLKDIV0_A2M_MASK | - S5P_CLKDIV0_HCLK200_MASK | S5P_CLKDIV0_PCLK100_MASK | - S5P_CLKDIV0_HCLK166_MASK | S5P_CLKDIV0_PCLK83_MASK | - S5P_CLKDIV0_HCLK133_MASK | S5P_CLKDIV0_PCLK66_MASK); - - reg |= ((clkdiv_val[index][0] << S5P_CLKDIV0_APLL_SHIFT) | - (clkdiv_val[index][1] << S5P_CLKDIV0_A2M_SHIFT) | - (clkdiv_val[index][2] << S5P_CLKDIV0_HCLK200_SHIFT) | - (clkdiv_val[index][3] << S5P_CLKDIV0_PCLK100_SHIFT) | - (clkdiv_val[index][4] << S5P_CLKDIV0_HCLK166_SHIFT) | - (clkdiv_val[index][5] << S5P_CLKDIV0_PCLK83_SHIFT) | - (clkdiv_val[index][6] << S5P_CLKDIV0_HCLK133_SHIFT) | - (clkdiv_val[index][7] << S5P_CLKDIV0_PCLK66_SHIFT)); - - __raw_writel(reg, S5P_CLK_DIV0); - - do { - reg = __raw_readl(S5P_CLKDIV_STAT0); - } while (reg & 0xff); - - /* ARM MCS value changed */ - reg = __raw_readl(S5P_ARM_MCS_CON); - reg &= ~0x3; - if (index >= L3) - reg |= 0x3; - else - reg |= 0x1; - - __raw_writel(reg, S5P_ARM_MCS_CON); - - if (pll_changing) { - /* 5. Set Lock time = 30us*24Mhz = 0x2cf */ - __raw_writel(0x2cf, S5P_APLL_LOCK); - - /* - * 6. Turn on APLL - * 6-1. Set PMS values - * 6-2. Wait untile the PLL is locked - */ - if (index == L0) - __raw_writel(APLL_VAL_1000, S5P_APLL_CON); - else - __raw_writel(APLL_VAL_800, S5P_APLL_CON); - - do { - reg = __raw_readl(S5P_APLL_CON); - } while (!(reg & (0x1 << 29))); - - /* - * 7. Change souce clock from SCLKMPLL(667Mhz) - * to SCLKA2M(200Mhz) in MFC_MUX and G3D MUX - * (667/4=166)->(200/4=50)Mhz - */ - reg = __raw_readl(S5P_CLK_SRC2); - reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK); - reg |= (0 << S5P_CLKSRC2_G3D_SHIFT) | - (0 << S5P_CLKSRC2_MFC_SHIFT); - __raw_writel(reg, S5P_CLK_SRC2); - - do { - reg = __raw_readl(S5P_CLKMUX_STAT1); - } while (reg & ((1 << 7) | (1 << 3))); - - /* - * 8. Change divider for MFC and G3D - * (200/4=50)->(200/1=200)Mhz - */ - reg = __raw_readl(S5P_CLK_DIV2); - reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK); - reg |= (clkdiv_val[index][10] << S5P_CLKDIV2_G3D_SHIFT) | - (clkdiv_val[index][9] << S5P_CLKDIV2_MFC_SHIFT); - __raw_writel(reg, S5P_CLK_DIV2); - - /* For MFC, G3D dividing */ - do { - reg = __raw_readl(S5P_CLKDIV_STAT0); - } while (reg & ((1 << 16) | (1 << 17))); - - /* 9. Change MPLL to APLL in MSYS_MUX */ - reg = __raw_readl(S5P_CLK_SRC0); - reg &= ~(S5P_CLKSRC0_MUX200_MASK); - reg |= (0x0 << S5P_CLKSRC0_MUX200_SHIFT); - __raw_writel(reg, S5P_CLK_SRC0); - - do { - reg = __raw_readl(S5P_CLKMUX_STAT0); - } while (reg & (0x1 << 18)); - - /* - * 10. DMC1 refresh counter - * L4 : DMC1 = 100Mhz 7.8us/(1/100) = 0x30c - * Others : DMC1 = 200Mhz 7.8us/(1/200) = 0x618 - */ - if (!bus_speed_changing) - s5pv210_set_refresh(DMC1, 200000); - } - - /* - * L4 level need to change memory bus speed, hence onedram clock divier - * and memory refresh parameter should be changed - */ - if (bus_speed_changing) { - reg = __raw_readl(S5P_CLK_DIV6); - reg &= ~S5P_CLKDIV6_ONEDRAM_MASK; - reg |= (clkdiv_val[index][8] << S5P_CLKDIV6_ONEDRAM_SHIFT); - __raw_writel(reg, S5P_CLK_DIV6); - - do { - reg = __raw_readl(S5P_CLKDIV_STAT1); - } while (reg & (1 << 15)); - - /* Reconfigure DRAM refresh counter value */ - if (index != L4) { - /* - * DMC0 : 166Mhz - * DMC1 : 200Mhz - */ - s5pv210_set_refresh(DMC0, 166000); - s5pv210_set_refresh(DMC1, 200000); - } else { - /* - * DMC0 : 83Mhz - * DMC1 : 100Mhz - */ - s5pv210_set_refresh(DMC0, 83000); - s5pv210_set_refresh(DMC1, 100000); - } - } - - if (freqs.new < freqs.old) { - /* Voltage down: will be implemented */ - } - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - printk(KERN_DEBUG "Perf changed[L%d]\n", index); - - return 0; -} - -#ifdef CONFIG_PM -static int s5pv210_cpufreq_suspend(struct cpufreq_policy *policy) -{ - return 0; -} - -static int s5pv210_cpufreq_resume(struct cpufreq_policy *policy) -{ - return 0; -} -#endif - -static int check_mem_type(void __iomem *dmc_reg) -{ - unsigned long val; - - val = __raw_readl(dmc_reg + 0x4); - val = (val & (0xf << 8)); - - return val >> 8; -} - -static int __init s5pv210_cpu_init(struct cpufreq_policy *policy) -{ - unsigned long mem_type; - - cpu_clk = clk_get(NULL, "armclk"); - if (IS_ERR(cpu_clk)) - return PTR_ERR(cpu_clk); - - dmc0_clk = clk_get(NULL, "sclk_dmc0"); - if (IS_ERR(dmc0_clk)) { - clk_put(cpu_clk); - return PTR_ERR(dmc0_clk); - } - - dmc1_clk = clk_get(NULL, "hclk_msys"); - if (IS_ERR(dmc1_clk)) { - clk_put(dmc0_clk); - clk_put(cpu_clk); - return PTR_ERR(dmc1_clk); - } - - if (policy->cpu != 0) - return -EINVAL; - - /* - * check_mem_type : This driver only support LPDDR & LPDDR2. - * other memory type is not supported. - */ - mem_type = check_mem_type(S5P_VA_DMC0); - - if ((mem_type != LPDDR) && (mem_type != LPDDR2)) { - printk(KERN_ERR "CPUFreq doesn't support this memory type\n"); - return -EINVAL; - } - - /* Find current refresh counter and frequency each DMC */ - s5pv210_dram_conf[0].refresh = (__raw_readl(S5P_VA_DMC0 + 0x30) * 1000); - s5pv210_dram_conf[0].freq = clk_get_rate(dmc0_clk); - - s5pv210_dram_conf[1].refresh = (__raw_readl(S5P_VA_DMC1 + 0x30) * 1000); - s5pv210_dram_conf[1].freq = clk_get_rate(dmc1_clk); - - policy->cur = policy->min = policy->max = s5pv210_getspeed(0); - - cpufreq_frequency_table_get_attr(s5pv210_freq_table, policy->cpu); - - policy->cpuinfo.transition_latency = 40000; - - return cpufreq_frequency_table_cpuinfo(policy, s5pv210_freq_table); -} - -static struct cpufreq_driver s5pv210_driver = { - .flags = CPUFREQ_STICKY, - .verify = s5pv210_verify_speed, - .target = s5pv210_target, - .get = s5pv210_getspeed, - .init = s5pv210_cpu_init, - .name = "s5pv210", -#ifdef CONFIG_PM - .suspend = s5pv210_cpufreq_suspend, - .resume = s5pv210_cpufreq_resume, -#endif -}; - -static int __init s5pv210_cpufreq_init(void) -{ - return cpufreq_register_driver(&s5pv210_driver); -} - -late_initcall(s5pv210_cpufreq_init); |