summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-s3c24xx/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-s3c24xx/Kconfig')
-rw-r--r--arch/arm/mach-s3c24xx/Kconfig82
1 files changed, 41 insertions, 41 deletions
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index d56b0f7f2b20..2b6cb5f29c2d 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -17,10 +17,10 @@ config CPU_S3C2410
bool "SAMSUNG S3C2410"
default y
select CPU_ARM920T
- select S3C2410_CLOCK
select CPU_LLSERIAL_S3C2410
- select S3C2410_PM if PM
+ select S3C2410_CLOCK
select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
+ select S3C2410_PM if PM
help
Support for S3C2410 and S3C2410A family from the S3C24XX line
of Samsung Mobile CPUs.
@@ -30,8 +30,8 @@ config CPU_S3C2412
depends on ARCH_S3C24XX
select CPU_ARM926T
select CPU_LLSERIAL_S3C2440
- select S3C2412_PM if PM
select S3C2412_DMA if S3C24XX_DMA
+ select S3C2412_PM if PM
help
Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
@@ -40,10 +40,10 @@ config CPU_S3C2416
depends on ARCH_S3C24XX
select CPU_ARM926T
select CPU_LLSERIAL_S3C2440
- select SAMSUNG_CLKSRC
+ select S3C2416_PM if PM
select S3C2443_COMMON
select S3C2443_DMA if S3C24XX_DMA
- select S3C2416_PM if PM
+ select SAMSUNG_CLKSRC
help
Support for the S3C2416 SoC from the S3C24XX line
@@ -75,9 +75,9 @@ config CPU_S3C2443
depends on ARCH_S3C24XX
select CPU_ARM920T
select CPU_LLSERIAL_S3C2440
- select SAMSUNG_CLKSRC
select S3C2443_COMMON
select S3C2443_DMA if S3C24XX_DMA
+ select SAMSUNG_CLKSRC
help
Support for the S3C2443 SoC from the S3C24XX line
@@ -156,16 +156,16 @@ config MACH_AML_M5900
config ARCH_BAST
bool "Simtec Electronics BAST (EB2410ITX)"
+ select ISA
+ select MACH_BAST_IDE
select S3C2410_IOTIMING if S3C2410_CPUFREQ
- select S3C24XX_SIMTEC_PM if PM
+ select S3C24XX_DCLK
select S3C24XX_SIMTEC_NOR
+ select S3C24XX_SIMTEC_PM if PM
select S3C24XX_SIMTEC_USB
- select MACH_BAST_IDE
- select S3C24XX_DCLK
- select ISA
select S3C_DEV_HWMON
- select S3C_DEV_USB_HOST
select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the Simtec Electronics EB2410ITX
development board (also known as BAST)
@@ -181,9 +181,9 @@ config BAST_PC104_IRQ
config ARCH_H1940
bool "IPAQ H1940"
select PM_H1940 if PM
- select S3C_DEV_USB_HOST
- select S3C_DEV_NAND
select S3C24XX_SETUP_TS
+ select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the HP IPAQ H1940
@@ -203,23 +203,23 @@ config PM_H1940
config MACH_N30
bool "Acer N30 family"
select MACH_N35
- select S3C_DEV_USB_HOST
select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
help
Say Y here if you want suppt for the Acer N30, Acer N35,
Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
config MACH_OTOM
bool "NexVision OTOM Board"
- select S3C_DEV_USB_HOST
select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the Nex Vision OTOM board
config MACH_QT2410
bool "QT2410"
- select S3C_DEV_USB_HOST
select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the Armzone QT2410
@@ -239,12 +239,12 @@ config MACH_TCT_HAMMER
config MACH_VR1000
bool "Thorcom VR1000"
- select S3C24XX_SIMTEC_PM if PM
+ select MACH_BAST_IDE
select S3C24XX_DCLK
select S3C24XX_SIMTEC_NOR
- select MACH_BAST_IDE
- select S3C_DEV_USB_HOST
+ select S3C24XX_SIMTEC_PM if PM
select S3C24XX_SIMTEC_USB
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the Thorcom VR1000 board.
@@ -285,8 +285,8 @@ comment "S3C2412 Boards"
config MACH_JIVE
bool "Logitech Jive"
- select S3C_DEV_USB_HOST
select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the Logitech Jive.
@@ -314,15 +314,15 @@ config MACH_SMDK2413
bool "SMDK2413"
select MACH_S3C2413
select S3C24XX_SMDK
- select S3C_DEV_USB_HOST
select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using an SMDK2413
config MACH_VSTMS
bool "VMSTMS"
- select S3C_DEV_USB_HOST
select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using an VSTMS board
@@ -351,13 +351,13 @@ comment "S3C2416 Boards"
config MACH_SMDK2416
bool "SMDK2416"
+ select S3C2416_SETUP_SDHCI
select S3C24XX_SMDK
select S3C_DEV_FB
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
- select S3C2416_SETUP_SDHCI
help
Say Y here if you are using an SMDK2416
@@ -379,11 +379,11 @@ comment "S3C2440 Boards"
config MACH_ANUBIS
bool "Simtec Electronics ANUBIS"
- select S3C24XX_DCLK
- select S3C24XX_SIMTEC_PM if PM
select HAVE_PATA_PLATFORM
- select S3C24XX_GPIO_EXTRA64
select S3C2440_XTAL_12000000
+ select S3C24XX_DCLK
+ select S3C24XX_GPIO_EXTRA64
+ select S3C24XX_SIMTEC_PM if PM
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Simtec Electronics ANUBIS
@@ -391,18 +391,18 @@ config MACH_ANUBIS
config MACH_AT2440EVB
bool "Avantech AT2440EVB development board"
- select S3C_DEV_USB_HOST
select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the AT2440EVB development board
config MACH_MINI2440
bool "MINI2440 development board"
select EEPROM_AT24
- select NEW_LEDS
select LEDS_CLASS
select LEDS_TRIGGER
select LEDS_TRIGGER_BACKLIGHT
+ select NEW_LEDS
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
help
@@ -412,20 +412,20 @@ config MACH_MINI2440
config MACH_NEXCODER_2440
bool "NexVision NEXCODER 2440 Light Board"
select S3C2440_XTAL_12000000
- select S3C_DEV_USB_HOST
select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
config MACH_OSIRIS
bool "Simtec IM2440D20 (OSIRIS) module"
+ select S3C2410_IOTIMING if S3C2440_CPUFREQ
+ select S3C2440_XTAL_12000000
select S3C24XX_DCLK
- select S3C24XX_SIMTEC_PM if PM
select S3C24XX_GPIO_EXTRA128
- select S3C2440_XTAL_12000000
- select S3C2410_IOTIMING if S3C2440_CPUFREQ
- select S3C_DEV_USB_HOST
+ select S3C24XX_SIMTEC_PM if PM
select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the Simtec IM2440D20 module, also
known as the Osiris.
@@ -445,8 +445,8 @@ config MACH_OSIRIS_DVS
config MACH_RX3715
bool "HP iPAQ rx3715"
- select S3C2440_XTAL_16934400
select PM_H1940 if PM
+ select S3C2440_XTAL_16934400
select S3C_DEV_NAND
help
Say Y here if you are using the HP iPAQ rx3715.
@@ -455,8 +455,8 @@ config ARCH_S3C2440
bool "SMDK2440"
select S3C2440_XTAL_16934400
select S3C24XX_SMDK
- select S3C_DEV_USB_HOST
select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the SMDK2440.
@@ -478,11 +478,11 @@ comment "S3C2442 Boards"
config MACH_NEO1973_GTA02
bool "Openmoko GTA02 / Freerunner phone"
+ select I2C
+ select MACH_NEO1973
select MFD_PCF50633
select PCF50633_GPIO
- select I2C
select POWER_SUPPLY
- select MACH_NEO1973
select S3C24XX_PWM
select S3C_DEV_USB_HOST
help
@@ -490,13 +490,13 @@ config MACH_NEO1973_GTA02
config MACH_RX1950
bool "HP iPAQ rx1950"
- select S3C24XX_DCLK
- select PM_H1940 if PM
select I2C
- select S3C24XX_PWM
- select S3C_DEV_NAND
+ select PM_H1940 if PM
select S3C2410_IOTIMING if S3C2440_CPUFREQ
select S3C2440_XTAL_16934400
+ select S3C24XX_DCLK
+ select S3C24XX_PWM
+ select S3C_DEV_NAND
help
Say Y here if you're using HP iPAQ rx1950