diff options
Diffstat (limited to 'arch/arm/mach-pxa')
| -rw-r--r-- | arch/arm/mach-pxa/Kconfig | 120 |
1 files changed, 60 insertions, 60 deletions
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 8e6288de69b9..11aa7399dc09 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -27,10 +27,10 @@ comment "Intel/Marvell Dev Platforms (sorted by hardware release time)" config MACH_PXA3XX_DT bool "Support PXA3xx platforms from device tree" - select PXA3xx select CPU_PXA300 - select POWER_SUPPLY select HAVE_PWM + select POWER_SUPPLY + select PXA3xx select USE_OF help Include support for Marvell PXA3xx based platforms using @@ -44,13 +44,13 @@ config ARCH_LUBBOCK config MACH_MAINSTONE bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)" - select PXA27x select HAVE_PWM + select PXA27x config MACH_ZYLONITE bool - select PXA3xx select HAVE_PWM + select PXA3xx config MACH_ZYLONITE300 bool "PXA3xx Development Platform (aka Zylonite) PXA300/310" @@ -65,19 +65,19 @@ config MACH_ZYLONITE320 config MACH_LITTLETON bool "PXA3xx Form Factor Platform (aka Littleton)" - select PXA3xx select CPU_PXA300 select CPU_PXA310 + select PXA3xx config MACH_TAVOREVB bool "PXA930 Evaluation Board (aka TavorEVB)" - select PXA3xx select CPU_PXA930 + select PXA3xx config MACH_SAAR bool "PXA930 Handheld Platform (aka SAAR)" - select PXA3xx select CPU_PXA930 + select PXA3xx comment "Third Party Dev Platforms (sorted by vendor name)" @@ -87,29 +87,29 @@ config ARCH_PXA_IDP config ARCH_VIPER bool "Arcom/Eurotech VIPER SBC" - select PXA25x - select ISA - select I2C_GPIO + select ARCOM_PCMCIA select HAVE_PWM + select I2C_GPIO + select ISA + select PXA25x select PXA_HAVE_ISA_IRQS - select ARCOM_PCMCIA config MACH_ARCOM_ZEUS bool "Arcom/Eurotech ZEUS SBC" - select PXA27x + select ARCOM_PCMCIA select ISA + select PXA27x select PXA_HAVE_ISA_IRQS - select ARCOM_PCMCIA config MACH_BALLOON3 bool "Balloon 3 board" - select PXA27x select IWMMXT + select PXA27x config MACH_CSB726 bool "Enable Cogent CSB726 System On a Module" - select PXA27x select IWMMXT + select PXA27x help Say Y here if you intend to run this kernel on a Cogent CSB726 System On Module. @@ -121,11 +121,11 @@ config CSB726_CSB701 config MACH_ARMCORE bool "CompuLab CM-X255/CM-X270 modules" select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI - select PXA27x select IWMMXT - select PXA25x select MIGHT_HAVE_PCI select NEED_MACH_IO_H if PCI + select PXA25x + select PXA27x config MACH_EM_X270 bool "CompuLab EM-x270 platform" @@ -137,10 +137,10 @@ config MACH_EXEDA config MACH_CM_X300 bool "CompuLab CM-X300 modules" - select PXA3xx select CPU_PXA300 select CPU_PXA310 select HAVE_PWM + select PXA3xx config MACH_CAPC7117 bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM" @@ -168,22 +168,22 @@ endchoice config MACH_INTELMOTE2 bool "Intel Mote 2 Platform" - select PXA27x select IWMMXT + select PXA27x config MACH_STARGATE2 bool "Intel Stargate 2 Platform" - select PXA27x select IWMMXT + select PXA27x config MACH_XCEP bool "Iskratel Electronics XCEP" - select PXA25x select MTD - select MTD_PHYSMAP - select MTD_CFI_INTELEXT select MTD_CFI + select MTD_CFI_INTELEXT select MTD_CHAR + select MTD_PHYSMAP + select PXA25x select SMC91X help PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash. @@ -195,14 +195,14 @@ config TRIZEPS_PXA config MACH_TRIZEPS4 bool "Keith und Koep Trizeps4 DIMM-Module" depends on TRIZEPS_PXA - select TRIZEPS_PCMCIA select PXA27x + select TRIZEPS_PCMCIA config MACH_TRIZEPS4WL bool "Keith und Koep Trizeps4-WL DIMM-Module" depends on TRIZEPS_PXA - select TRIZEPS_PCMCIA select PXA27x + select TRIZEPS_PCMCIA choice prompt "Select base board for Trizeps module" @@ -231,18 +231,18 @@ config TRIZEPS_PCMCIA config MACH_LOGICPD_PXA270 bool "LogicPD PXA270 Card Engine Development Platform" - select PXA27x select HAVE_PWM + select PXA27x config MACH_PCM027 bool "Phytec phyCORE-PXA270 CPU module (PCM-027)" - select PXA27x select IWMMXT + select PXA27x config MACH_PCM990_BASEBOARD bool "PHYTEC PCM-990 development board" - select HAVE_PWM depends on MACH_PCM027 + select HAVE_PWM choice prompt "display on pcm990" @@ -266,19 +266,19 @@ config MACH_COLIBRI config MACH_COLIBRI_PXA270_INCOME bool "Income s.r.o. PXA270 SBC" depends on MACH_COLIBRI - select PXA27x select HAVE_PWM + select PXA27x config MACH_COLIBRI300 bool "Toradex Colibri PXA300/310" - select PXA3xx select CPU_PXA300 select CPU_PXA310 + select PXA3xx config MACH_COLIBRI320 bool "Toradex Colibri PXA320" - select PXA3xx select CPU_PXA320 + select PXA3xx config MACH_COLIBRI_EVALBOARD bool "Toradex Colibri Evaluation Carrier Board support" @@ -286,8 +286,8 @@ config MACH_COLIBRI_EVALBOARD config MACH_VPAC270 bool "Voipac PXA270" - select PXA27x select HAVE_PATA_PLATFORM + select PXA27x help PXA270 based Single Board Computer. @@ -295,9 +295,9 @@ comment "End-user Products (sorted by vendor name)" config MACH_H4700 bool "HP iPAQ hx4700" - select PXA27x - select IWMMXT select HAVE_PWM + select IWMMXT + select PXA27x config MACH_H5000 bool "HP iPAQ h5000" @@ -309,16 +309,16 @@ config MACH_HIMALAYA config MACH_MAGICIAN bool "Enable HTC Magician Support" - select PXA27x - select IWMMXT select HAVE_PWM + select IWMMXT + select PXA27x config MACH_MIOA701 bool "Mitac Mio A701 Support" - select PXA27x - select IWMMXT - select HAVE_PWM select GPIO_SYSFS + select HAVE_PWM + select IWMMXT + select PXA27x help Say Y here if you intend to run this kernel on a MIO A701. Currently there is only basic support @@ -326,9 +326,9 @@ config MACH_MIOA701 config PXA_EZX bool "Motorola EZX Platform" - select PXA27x - select IWMMXT select HAVE_PWM + select IWMMXT + select PXA27x config MACH_EZX_A780 bool "Motorola EZX A780" @@ -393,9 +393,9 @@ config MACH_PALMT5 bool "Palm Tungsten|T5" default y depends on ARCH_PXA_PALM - select PXA27x select IWMMXT select MACH_PALM27X + select PXA27x help Say Y here if you intend to run this kernel on a Palm Tungsten|T5 handheld computer. @@ -404,9 +404,9 @@ config MACH_PALMTX bool "Palm T|X" default y depends on ARCH_PXA_PALM - select PXA27x select IWMMXT select MACH_PALM27X + select PXA27x help Say Y here if you intend to run this kernel on a Palm T|X handheld computer. @@ -415,9 +415,9 @@ config MACH_PALMZ72 bool "Palm Zire 72" default y depends on ARCH_PXA_PALM - select PXA27x select IWMMXT select MACH_PALM27X + select PXA27x help Say Y here if you intend to run this kernel on Palm Zire 72 handheld computer. @@ -426,9 +426,9 @@ config MACH_PALMLD bool "Palm LifeDrive" default y depends on ARCH_PXA_PALM - select PXA27x select IWMMXT select MACH_PALM27X + select PXA27x help Say Y here if you intend to run this kernel on a Palm LifeDrive handheld computer. @@ -441,10 +441,10 @@ config MACH_CENTRO bool "Palm Centro 685 (GSM)" default y depends on ARCH_PXA_PALM - select MACH_PALM27X - select PXA27x select IWMMXT + select MACH_PALM27X select PALM_TREO + select PXA27x help Say Y here if you intend to run this kernel on Palm Centro 685 (GSM) smartphone. @@ -453,37 +453,37 @@ config MACH_TREO680 bool "Palm Treo 680" default y depends on ARCH_PXA_PALM - select MACH_PALM27X - select PXA27x select IWMMXT + select MACH_PALM27X select PALM_TREO + select PXA27x help Say Y here if you intend to run this kernel on Palm Treo 680 smartphone. config MACH_RAUMFELD_RC bool "Raumfeld Controller" - select PXA3xx select CPU_PXA300 - select POWER_SUPPLY select HAVE_PWM + select POWER_SUPPLY + select PXA3xx config MACH_RAUMFELD_CONNECTOR bool "Raumfeld Connector" + select CPU_PXA300 select POWER_SUPPLY select PXA3xx - select CPU_PXA300 config MACH_RAUMFELD_SPEAKER bool "Raumfeld Speaker" + select CPU_PXA300 select POWER_SUPPLY select PXA3xx - select CPU_PXA300 config PXA_SHARPSL bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models" - select SHARP_SCOOP select SHARP_PARAM + select SHARP_SCOOP help Say Y here if you intend to run this kernel on a Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi), @@ -526,11 +526,11 @@ config MACH_HUSKY config MACH_AKITA bool "Enable Sharp SL-1000 (Akita) Support" depends on PXA_SHARPSL - select PXA27x - select PXA_SHARP_Cxx00 - select MACH_SPITZ select I2C select I2C_PXA + select MACH_SPITZ + select PXA27x + select PXA_SHARP_Cxx00 config MACH_SPITZ bool "Enable Sharp Zaurus SL-3000 (Spitz) Support" @@ -575,8 +575,8 @@ config MACH_ICONTROL config ARCH_PXA_ESERIES bool "PXA based Toshiba e-series PDAs" - select PXA25x select FB_W100 + select PXA25x config MACH_E330 bool "Toshiba e330" @@ -628,8 +628,8 @@ config MACH_E800 config MACH_ZIPIT2 bool "Zipit Z2 Handheld" - select PXA27x select HAVE_PWM + select PXA27x endif endmenu @@ -720,9 +720,9 @@ config SHARPSL_PM config SHARPSL_PM_MAX1111 bool select HWMON + select SENSORS_MAX1111 select SPI select SPI_MASTER - select SENSORS_MAX1111 config PXA_HAVE_ISA_IRQS bool |