summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-pxa/raumfeld.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-pxa/raumfeld.c')
-rw-r--r--arch/arm/mach-pxa/raumfeld.c36
1 files changed, 19 insertions, 17 deletions
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index d130f77b6d11..2f37d43f51b6 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -573,10 +573,10 @@ static struct pxafb_mode_info sharp_lq043t3dx02_mode = {
.xres = 480,
.yres = 272,
.bpp = 16,
- .hsync_len = 4,
+ .hsync_len = 41,
.left_margin = 2,
.right_margin = 1,
- .vsync_len = 1,
+ .vsync_len = 10,
.upper_margin = 3,
.lower_margin = 1,
.sync = 0,
@@ -596,29 +596,31 @@ static void __init raumfeld_lcd_init(void)
{
int ret;
- pxa_set_fb_info(NULL, &raumfeld_sharp_lcd_info);
-
- /* Earlier devices had the backlight regulator controlled
- * via PWM, later versions use another controller for that */
- if ((system_rev & 0xff) < 2) {
- mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT;
- pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1);
- platform_device_register(&raumfeld_pwm_backlight_device);
- } else
- platform_device_register(&raumfeld_lt3593_device);
-
ret = gpio_request(GPIO_TFT_VA_EN, "display VA enable");
if (ret < 0)
pr_warning("Unable to request GPIO_TFT_VA_EN\n");
else
gpio_direction_output(GPIO_TFT_VA_EN, 1);
+ msleep(100);
+
ret = gpio_request(GPIO_DISPLAY_ENABLE, "display enable");
if (ret < 0)
pr_warning("Unable to request GPIO_DISPLAY_ENABLE\n");
else
gpio_direction_output(GPIO_DISPLAY_ENABLE, 1);
+ /* Hardware revision 2 has the backlight regulator controlled
+ * by an LT3593, earlier and later devices use PWM for that. */
+ if ((system_rev & 0xff) == 2) {
+ platform_device_register(&raumfeld_lt3593_device);
+ } else {
+ mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT;
+ pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1);
+ platform_device_register(&raumfeld_pwm_backlight_device);
+ }
+
+ pxa_set_fb_info(NULL, &raumfeld_sharp_lcd_info);
platform_device_register(&pxa3xx_device_gcu);
}
@@ -657,10 +659,10 @@ static struct lis3lv02d_platform_data lis3_pdata = {
#define SPI_AK4104 \
{ \
- .modalias = "ak4104", \
- .max_speed_hz = 10000, \
- .bus_num = 0, \
- .chip_select = 0, \
+ .modalias = "ak4104-codec", \
+ .max_speed_hz = 10000, \
+ .bus_num = 0, \
+ .chip_select = 0, \
.controller_data = (void *) GPIO_SPDIF_CS, \
}