summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-pxa/lubbock.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-pxa/lubbock.c')
-rw-r--r--arch/arm/mach-pxa/lubbock.c121
1 files changed, 57 insertions, 64 deletions
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index e7ae4bb3e361..ca209c443f34 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -42,6 +42,7 @@
#include <asm/arch/pxa-regs.h>
#include <asm/arch/pxa2xx-regs.h>
+#include <asm/arch/mfp-pxa25x.h>
#include <asm/arch/lubbock.h>
#include <asm/arch/udc.h>
#include <asm/arch/irda.h>
@@ -51,6 +52,40 @@
#include "generic.h"
#include "devices.h"
+static unsigned long lubbock_pin_config[] __initdata = {
+ GPIO15_nCS_1, /* CS1 - Flash */
+ GPIO79_nCS_3, /* CS3 - SMC ethernet */
+
+ /* SSP data pins */
+ GPIO23_SSP1_SCLK,
+ GPIO25_SSP1_TXD,
+ GPIO26_SSP1_RXD,
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
+
+ /* PC Card */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO52_nPCE_1,
+ GPIO53_nPCE_2,
+ GPIO54_nPSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+
+ /* MMC */
+ GPIO6_MMC_CLK,
+ GPIO8_MMC_CS0,
+
+ /* wakeup */
+ GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
+};
#define LUB_MISC_WR __LUB_REG(LUBBOCK_FPGA_PHYS + 0x080)
@@ -186,26 +221,6 @@ static struct platform_device sa1111_device = {
.resource = sa1111_resources,
};
-static struct resource smc91x_resources[] = {
- [0] = {
- .name = "smc91x-regs",
- .start = 0x0c000c00,
- .end = 0x0c0fffff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = LUBBOCK_ETH_IRQ,
- .end = LUBBOCK_ETH_IRQ,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
- },
- [2] = {
- .name = "smc91x-attrib",
- .start = 0x0e000000,
- .end = 0x0e0fffff,
- .flags = IORESOURCE_MEM,
- },
-};
-
/* ADS7846 is connected through SSP ... and if your board has J5 populated,
* you can select it to replace the ucb1400 by switching the touchscreen cable
* (to J5) and poking board registers (as done below). Else it's only useful
@@ -261,6 +276,26 @@ static struct spi_board_info spi_board_info[] __initdata = { {
},
};
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .name = "smc91x-regs",
+ .start = 0x0c000c00,
+ .end = 0x0c0fffff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = LUBBOCK_ETH_IRQ,
+ .end = LUBBOCK_ETH_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ },
+ [2] = {
+ .name = "smc91x-attrib",
+ .start = 0x0e000000,
+ .end = 0x0e0fffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = -1,
@@ -404,10 +439,6 @@ static int lubbock_mci_init(struct device *dev,
irq_handler_t detect_int,
void *data)
{
- /* setup GPIO for PXA25x MMC controller */
- pxa_gpio_mode(GPIO6_MMCCLK_MD);
- pxa_gpio_mode(GPIO8_MMCCS0_MD);
-
/* detect card insert/eject */
mmc_detect_int = detect_int;
init_timer(&mmc_timer);
@@ -457,6 +488,8 @@ static void __init lubbock_init(void)
{
int flashboot = (LUB_CONF_SWITCHES & 1);
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(lubbock_pin_config));
+
pxa_set_udc_info(&udc_info);
set_pxa_fb_info(&sharp_lm8v31);
pxa_set_mci_info(&lubbock_mci_platform_data);
@@ -489,46 +522,6 @@ static void __init lubbock_map_io(void)
pxa_map_io();
iotable_init(lubbock_io_desc, ARRAY_SIZE(lubbock_io_desc));
- /* SSP data pins */
- pxa_gpio_mode(GPIO23_SCLK_MD);
- pxa_gpio_mode(GPIO25_STXD_MD);
- pxa_gpio_mode(GPIO26_SRXD_MD);
-
- /* This enables the BTUART */
- pxa_gpio_mode(GPIO42_BTRXD_MD);
- pxa_gpio_mode(GPIO43_BTTXD_MD);
- pxa_gpio_mode(GPIO44_BTCTS_MD);
- pxa_gpio_mode(GPIO45_BTRTS_MD);
-
- GPSR(GPIO48_nPOE) =
- GPIO_bit(GPIO48_nPOE) |
- GPIO_bit(GPIO49_nPWE) |
- GPIO_bit(GPIO50_nPIOR) |
- GPIO_bit(GPIO51_nPIOW) |
- GPIO_bit(GPIO52_nPCE_1) |
- GPIO_bit(GPIO53_nPCE_2);
-
- pxa_gpio_mode(GPIO48_nPOE_MD);
- pxa_gpio_mode(GPIO49_nPWE_MD);
- pxa_gpio_mode(GPIO50_nPIOR_MD);
- pxa_gpio_mode(GPIO51_nPIOW_MD);
- pxa_gpio_mode(GPIO52_nPCE_1_MD);
- pxa_gpio_mode(GPIO53_nPCE_2_MD);
- pxa_gpio_mode(GPIO54_pSKTSEL_MD);
- pxa_gpio_mode(GPIO55_nPREG_MD);
- pxa_gpio_mode(GPIO56_nPWAIT_MD);
- pxa_gpio_mode(GPIO57_nIOIS16_MD);
-
- /* This is for the SMC chip select */
- pxa_gpio_mode(GPIO79_nCS_3_MD);
-
- /* setup sleep mode values */
- PWER = 0x00000002;
- PFER = 0x00000000;
- PRER = 0x00000002;
- PGSR0 = 0x00008000;
- PGSR1 = 0x003F0202;
- PGSR2 = 0x0001C000;
PCFR |= PCFR_OPDE;
}