summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/prcm-common.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2/prcm-common.h')
-rw-r--r--arch/arm/mach-omap2/prcm-common.h77
1 files changed, 76 insertions, 1 deletions
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 0363dcb0ef93..5aa5435e3ff1 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -4,7 +4,7 @@
/*
* OMAP2/3 PRCM base and module definitions
*
- * Copyright (C) 2007-2009 Texas Instruments, Inc.
+ * Copyright (C) 2007-2009, 2011 Texas Instruments, Inc.
* Copyright (C) 2007-2009 Nokia Corporation
*
* Written by Paul Walmsley
@@ -201,6 +201,8 @@
#define OMAP3430_EN_MMC2_SHIFT 25
#define OMAP3430_EN_MMC1_MASK (1 << 24)
#define OMAP3430_EN_MMC1_SHIFT 24
+#define OMAP3430_EN_UART4_MASK (1 << 23)
+#define OMAP3430_EN_UART4_SHIFT 23
#define OMAP3430_EN_MCSPI4_MASK (1 << 21)
#define OMAP3430_EN_MCSPI4_SHIFT 21
#define OMAP3430_EN_MCSPI3_MASK (1 << 20)
@@ -408,6 +410,79 @@
extern void __iomem *prm_base;
extern void __iomem *cm_base;
extern void __iomem *cm2_base;
+
+/**
+ * struct omap_prcm_irq - describes a PRCM interrupt bit
+ * @name: a short name describing the interrupt type, e.g. "wkup" or "io"
+ * @offset: the bit shift of the interrupt inside the IRQ{ENABLE,STATUS} regs
+ * @priority: should this interrupt be handled before @priority=false IRQs?
+ *
+ * Describes interrupt bits inside the PRM_IRQ{ENABLE,STATUS}_MPU* registers.
+ * On systems with multiple PRM MPU IRQ registers, the bitfields read from
+ * the registers are concatenated, so @offset could be > 31 on these systems -
+ * see omap_prm_irq_handler() for more details. I/O ring interrupts should
+ * have @priority set to true.
+ */
+struct omap_prcm_irq {
+ const char *name;
+ unsigned int offset;
+ bool priority;
+};
+
+/**
+ * struct omap_prcm_irq_setup - PRCM interrupt controller details
+ * @ack: PRM register offset for the first PRM_IRQSTATUS_MPU register
+ * @mask: PRM register offset for the first PRM_IRQENABLE_MPU register
+ * @nr_regs: number of PRM_IRQ{STATUS,ENABLE}_MPU* registers
+ * @nr_irqs: number of entries in the @irqs array
+ * @irqs: ptr to an array of PRCM interrupt bits (see @nr_irqs)
+ * @irq: MPU IRQ asserted when a PRCM interrupt arrives
+ * @read_pending_irqs: fn ptr to determine if any PRCM IRQs are pending
+ * @ocp_barrier: fn ptr to force buffered PRM writes to complete
+ * @save_and_clear_irqen: fn ptr to save and clear IRQENABLE regs
+ * @restore_irqen: fn ptr to save and clear IRQENABLE regs
+ * @saved_mask: IRQENABLE regs are saved here during suspend
+ * @priority_mask: 1 bit per IRQ, set to 1 if omap_prcm_irq.priority = true
+ * @base_irq: base dynamic IRQ number, returned from irq_alloc_descs() in init
+ * @suspended: set to true after Linux suspend code has called our ->prepare()
+ * @suspend_save_flag: set to true after IRQ masks have been saved and disabled
+ *
+ * @saved_mask, @priority_mask, @base_irq, @suspended, and
+ * @suspend_save_flag are populated dynamically, and are not to be
+ * specified in static initializers.
+ */
+struct omap_prcm_irq_setup {
+ u16 ack;
+ u16 mask;
+ u8 nr_regs;
+ u8 nr_irqs;
+ const struct omap_prcm_irq *irqs;
+ int irq;
+ void (*read_pending_irqs)(unsigned long *events);
+ void (*ocp_barrier)(void);
+ void (*save_and_clear_irqen)(u32 *saved_mask);
+ void (*restore_irqen)(u32 *saved_mask);
+ u32 *saved_mask;
+ u32 *priority_mask;
+ int base_irq;
+ bool suspended;
+ bool suspend_save_flag;
+};
+
+/* OMAP_PRCM_IRQ: convenience macro for creating struct omap_prcm_irq records */
+#define OMAP_PRCM_IRQ(_name, _offset, _priority) { \
+ .name = _name, \
+ .offset = _offset, \
+ .priority = _priority \
+ }
+
+extern void omap_prcm_irq_cleanup(void);
+extern int omap_prcm_register_chain_handler(
+ struct omap_prcm_irq_setup *irq_setup);
+extern int omap_prcm_event_to_irq(const char *event);
+extern void omap_prcm_irq_prepare(void);
+extern void omap_prcm_irq_complete(void);
+
# endif
#endif