diff options
Diffstat (limited to 'arch/arm/mach-omap2/gpmc.c')
-rw-r--r-- | arch/arm/mach-omap2/gpmc.c | 100 |
1 files changed, 100 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 20747fbc686a..ee5d0e970c62 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -107,6 +107,7 @@ #define GPMC_HAS_WR_ACCESS 0x1 #define GPMC_HAS_WR_DATA_MUX_BUS 0x2 +#define GPMC_HAS_MUX_AAD 0x4 #define GPMC_NR_WAITPINS 4 @@ -1126,6 +1127,90 @@ int gpmc_calc_timings(struct gpmc_timings *gpmc_t, return 0; } +/** + * gpmc_cs_program_settings - programs non-timing related settings + * @cs: GPMC chip-select to program + * @p: pointer to GPMC settings structure + * + * Programs non-timing related settings for a GPMC chip-select, such as + * bus-width, burst configuration, etc. Function should be called once + * for each chip-select that is being used and must be called before + * calling gpmc_cs_set_timings() as timing parameters in the CONFIG1 + * register will be initialised to zero by this function. Returns 0 on + * success and appropriate negative error code on failure. + */ +int gpmc_cs_program_settings(int cs, struct gpmc_settings *p) +{ + u32 config1; + + if ((!p->device_width) || (p->device_width > GPMC_DEVWIDTH_16BIT)) { + pr_err("%s: invalid width %d!", __func__, p->device_width); + return -EINVAL; + } + + /* Address-data multiplexing not supported for NAND devices */ + if (p->device_nand && p->mux_add_data) { + pr_err("%s: invalid configuration!\n", __func__); + return -EINVAL; + } + + if ((p->mux_add_data > GPMC_MUX_AD) || + ((p->mux_add_data == GPMC_MUX_AAD) && + !(gpmc_capability & GPMC_HAS_MUX_AAD))) { + pr_err("%s: invalid multiplex configuration!\n", __func__); + return -EINVAL; + } + + /* Page/burst mode supports lengths of 4, 8 and 16 bytes */ + if (p->burst_read || p->burst_write) { + switch (p->burst_len) { + case GPMC_BURST_4: + case GPMC_BURST_8: + case GPMC_BURST_16: + break; + default: + pr_err("%s: invalid page/burst-length (%d)\n", + __func__, p->burst_len); + return -EINVAL; + } + } + + if ((p->wait_on_read || p->wait_on_write) && + (p->wait_pin > gpmc_nr_waitpins)) { + pr_err("%s: invalid wait-pin (%d)\n", __func__, p->wait_pin); + return -EINVAL; + } + + config1 = GPMC_CONFIG1_DEVICESIZE((p->device_width - 1)); + + if (p->sync_read) + config1 |= GPMC_CONFIG1_READTYPE_SYNC; + if (p->sync_write) + config1 |= GPMC_CONFIG1_WRITETYPE_SYNC; + if (p->wait_on_read) + config1 |= GPMC_CONFIG1_WAIT_READ_MON; + if (p->wait_on_write) + config1 |= GPMC_CONFIG1_WAIT_WRITE_MON; + if (p->wait_on_read || p->wait_on_write) + config1 |= GPMC_CONFIG1_WAIT_PIN_SEL(p->wait_pin); + if (p->device_nand) + config1 |= GPMC_CONFIG1_DEVICETYPE(GPMC_DEVICETYPE_NAND); + if (p->mux_add_data) + config1 |= GPMC_CONFIG1_MUXTYPE(p->mux_add_data); + if (p->burst_read) + config1 |= GPMC_CONFIG1_READMULTIPLE_SUPP; + if (p->burst_write) + config1 |= GPMC_CONFIG1_WRITEMULTIPLE_SUPP; + if (p->burst_read || p->burst_write) { + config1 |= GPMC_CONFIG1_PAGE_LEN(p->burst_len >> 3); + config1 |= p->burst_wrap ? GPMC_CONFIG1_WRAPBURST_SUPP : 0; + } + + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, config1); + + return 0; +} + #ifdef CONFIG_OF static struct of_device_id gpmc_dt_ids[] = { { .compatible = "ti,omap2420-gpmc" }, @@ -1372,8 +1457,23 @@ static int gpmc_probe(struct platform_device *pdev) gpmc_dev = &pdev->dev; l = gpmc_read_reg(GPMC_REVISION); + + /* + * FIXME: Once device-tree migration is complete the below flags + * should be populated based upon the device-tree compatible + * string. For now just use the IP revision. OMAP3+ devices have + * the wr_access and wr_data_mux_bus register fields. OMAP4+ + * devices support the addr-addr-data multiplex protocol. + * + * GPMC IP revisions: + * - OMAP24xx = 2.0 + * - OMAP3xxx = 5.0 + * - OMAP44xx/54xx/AM335x = 6.0 + */ if (GPMC_REVISION_MAJOR(l) > 0x4) gpmc_capability = GPMC_HAS_WR_ACCESS | GPMC_HAS_WR_DATA_MUX_BUS; + if (GPMC_REVISION_MAJOR(l) > 0x5) + gpmc_capability |= GPMC_HAS_MUX_AAD; dev_info(gpmc_dev, "GPMC revision %d.%d\n", GPMC_REVISION_MAJOR(l), GPMC_REVISION_MINOR(l)); |