diff options
Diffstat (limited to 'arch/arm/mach-omap2/common-board-devices.c')
| -rw-r--r-- | arch/arm/mach-omap2/common-board-devices.c | 163 |
1 files changed, 163 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c new file mode 100644 index 000000000000..e94903b2c65b --- /dev/null +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -0,0 +1,163 @@ +/* + * common-board-devices.c + * + * Copyright (C) 2011 CompuLab, Ltd. + * Author: Mike Rapoport <mike@compulab.co.il> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <linux/i2c.h> +#include <linux/i2c/twl.h> + +#include <linux/gpio.h> +#include <linux/spi/spi.h> +#include <linux/spi/ads7846.h> + +#include <plat/i2c.h> +#include <plat/mcspi.h> +#include <plat/nand.h> + +#include "common-board-devices.h" + +static struct i2c_board_info __initdata pmic_i2c_board_info = { + .addr = 0x48, + .flags = I2C_CLIENT_WAKE, +}; + +void __init omap_pmic_init(int bus, u32 clkrate, + const char *pmic_type, int pmic_irq, + struct twl4030_platform_data *pmic_data) +{ + strncpy(pmic_i2c_board_info.type, pmic_type, + sizeof(pmic_i2c_board_info.type)); + pmic_i2c_board_info.irq = pmic_irq; + pmic_i2c_board_info.platform_data = pmic_data; + + omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1); +} + +#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ + defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) +static struct omap2_mcspi_device_config ads7846_mcspi_config = { + .turbo_mode = 0, + .single_channel = 1, /* 0: slave, 1: master */ +}; + +static struct ads7846_platform_data ads7846_config = { + .x_max = 0x0fff, + .y_max = 0x0fff, + .x_plate_ohms = 180, + .pressure_max = 255, + .debounce_max = 10, + .debounce_tol = 3, + .debounce_rep = 1, + .gpio_pendown = -EINVAL, + .keep_vref_on = 1, +}; + +static struct spi_board_info ads7846_spi_board_info __initdata = { + .modalias = "ads7846", + .bus_num = -EINVAL, + .chip_select = 0, + .max_speed_hz = 1500000, + .controller_data = &ads7846_mcspi_config, + .irq = -EINVAL, + .platform_data = &ads7846_config, +}; + +void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, + struct ads7846_platform_data *board_pdata) +{ + struct spi_board_info *spi_bi = &ads7846_spi_board_info; + int err; + + err = gpio_request(gpio_pendown, "TS PenDown"); + if (err) { + pr_err("Could not obtain gpio for TS PenDown: %d\n", err); + return; + } + + gpio_direction_input(gpio_pendown); + gpio_export(gpio_pendown, 0); + + if (gpio_debounce) + gpio_set_debounce(gpio_pendown, gpio_debounce); + + ads7846_config.gpio_pendown = gpio_pendown; + + spi_bi->bus_num = bus_num; + spi_bi->irq = OMAP_GPIO_IRQ(gpio_pendown); + + if (board_pdata) + spi_bi->platform_data = board_pdata; + + spi_register_board_info(&ads7846_spi_board_info, 1); +} +#else +void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, + struct ads7846_platform_data *board_pdata) +{ +} +#endif + +#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE) +static struct omap_nand_platform_data nand_data = { + .dma_channel = -1, /* disable DMA in OMAP NAND driver */ +}; + +void __init omap_nand_flash_init(int options, struct mtd_partition *parts, + int nr_parts) +{ + u8 cs = 0; + u8 nandcs = GPMC_CS_NUM + 1; + + /* find out the chip-select on which NAND exists */ + while (cs < GPMC_CS_NUM) { + u32 ret = 0; + ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); + + if ((ret & 0xC00) == 0x800) { + printk(KERN_INFO "Found NAND on CS%d\n", cs); + if (nandcs > GPMC_CS_NUM) + nandcs = cs; + } + cs++; + } + + if (nandcs > GPMC_CS_NUM) { + printk(KERN_INFO "NAND: Unable to find configuration " + "in GPMC\n "); + return; + } + + if (nandcs < GPMC_CS_NUM) { + nand_data.cs = nandcs; + nand_data.parts = parts; + nand_data.nr_parts = nr_parts; + nand_data.options = options; + + printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); + if (gpmc_nand_init(&nand_data) < 0) + printk(KERN_ERR "Unable to register NAND device\n"); + } +} +#else +void __init omap_nand_flash_init(int options, struct mtd_partition *parts, + int nr_parts) +{ +} +#endif |