diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-rx51-peripherals.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-rx51-peripherals.c | 232 |
1 files changed, 113 insertions, 119 deletions
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index a7381729645c..da93b86234ed 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -27,30 +27,13 @@ #include <mach/dma.h> #include <mach/gpmc.h> #include <mach/keypad.h> +#include <mach/onenand.h> +#include <mach/gpmc-smc91x.h> #include "mmc-twl4030.h" - -#define SMC91X_CS 1 -#define SMC91X_GPIO_IRQ 54 -#define SMC91X_GPIO_RESET 164 -#define SMC91X_GPIO_PWRDWN 86 - -static struct resource rx51_smc91x_resources[] = { - [0] = { - .flags = IORESOURCE_MEM, - }, - [1] = { - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, - }, -}; - -static struct platform_device rx51_smc91x_device = { - .name = "smc91x", - .id = -1, - .num_resources = ARRAY_SIZE(rx51_smc91x_resources), - .resource = rx51_smc91x_resources, -}; +#define SYSTEM_REV_B_USES_VAUX3 0x1699 +#define SYSTEM_REV_S_USES_VAUX3 0x8 static int rx51_keymap[] = { KEY(0, 0, KEY_Q), @@ -107,98 +90,6 @@ static struct twl4030_keypad_data rx51_kp_data = { .rep = 1, }; -static struct platform_device *rx51_peripherals_devices[] = { - &rx51_smc91x_device, -}; - -/* - * Timings are taken from smsc-lan91c96-ms.pdf - */ -static int smc91x_init_gpmc(int cs) -{ - struct gpmc_timings t; - const int t2_r = 45; /* t2 in Figure 12.10 */ - const int t2_w = 30; /* t2 in Figure 12.11 */ - const int t3 = 15; /* t3 in Figure 12.10 */ - const int t5_r = 0; /* t5 in Figure 12.10 */ - const int t6_r = 45; /* t6 in Figure 12.10 */ - const int t6_w = 0; /* t6 in Figure 12.11 */ - const int t7_w = 15; /* t7 in Figure 12.11 */ - const int t15 = 12; /* t15 in Figure 12.2 */ - const int t20 = 185; /* t20 in Figure 12.2 */ - - memset(&t, 0, sizeof(t)); - - t.cs_on = t15; - t.cs_rd_off = t3 + t2_r + t5_r; /* Figure 12.10 */ - t.cs_wr_off = t3 + t2_w + t6_w; /* Figure 12.11 */ - t.adv_on = t3; /* Figure 12.10 */ - t.adv_rd_off = t3 + t2_r; /* Figure 12.10 */ - t.adv_wr_off = t3 + t2_w; /* Figure 12.11 */ - t.oe_off = t3 + t2_r + t5_r; /* Figure 12.10 */ - t.oe_on = t.oe_off - t6_r; /* Figure 12.10 */ - t.we_off = t3 + t2_w + t6_w; /* Figure 12.11 */ - t.we_on = t.we_off - t7_w; /* Figure 12.11 */ - t.rd_cycle = t20; /* Figure 12.2 */ - t.wr_cycle = t20; /* Figure 12.4 */ - t.access = t3 + t2_r + t5_r; /* Figure 12.10 */ - t.wr_access = t3 + t2_w + t6_w; /* Figure 12.11 */ - - gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, GPMC_CONFIG1_DEVICESIZE_16); - - return gpmc_cs_set_timings(cs, &t); -} - -static void __init rx51_init_smc91x(void) -{ - unsigned long cs_mem_base; - int ret; - - omap_cfg_reg(U8_34XX_GPIO54_DOWN); - omap_cfg_reg(G25_34XX_GPIO86_OUT); - omap_cfg_reg(H19_34XX_GPIO164_OUT); - - if (gpmc_cs_request(SMC91X_CS, SZ_16M, &cs_mem_base) < 0) { - printk(KERN_ERR "Failed to request GPMC mem for smc91x\n"); - return; - } - - rx51_smc91x_resources[0].start = cs_mem_base + 0x300; - rx51_smc91x_resources[0].end = cs_mem_base + 0x30f; - - smc91x_init_gpmc(SMC91X_CS); - - if (gpio_request(SMC91X_GPIO_IRQ, "SMC91X irq") < 0) - goto free1; - - gpio_direction_input(SMC91X_GPIO_IRQ); - rx51_smc91x_resources[1].start = gpio_to_irq(SMC91X_GPIO_IRQ); - - ret = gpio_request(SMC91X_GPIO_PWRDWN, "SMC91X powerdown"); - if (ret) - goto free2; - gpio_direction_output(SMC91X_GPIO_PWRDWN, 0); - - ret = gpio_request(SMC91X_GPIO_RESET, "SMC91X reset"); - if (ret) - goto free3; - gpio_direction_output(SMC91X_GPIO_RESET, 0); - gpio_set_value(SMC91X_GPIO_RESET, 1); - msleep(100); - gpio_set_value(SMC91X_GPIO_RESET, 0); - - return; - -free3: - gpio_free(SMC91X_GPIO_PWRDWN); -free2: - gpio_free(SMC91X_GPIO_IRQ); -free1: - gpmc_cs_free(SMC91X_CS); - - printk(KERN_ERR "Could not initialize smc91x\n"); -} - static struct twl4030_madc_platform_data rx51_madc_data = { .irq_line = 1, }; @@ -259,7 +150,7 @@ static struct regulator_init_data rx51_vaux2 = { }; /* VAUX3 - adds more power to VIO_18 rail */ -static struct regulator_init_data rx51_vaux3 = { +static struct regulator_init_data rx51_vaux3_cam = { .constraints = { .name = "VCAM_DIG_18", .min_uV = 1800000, @@ -272,6 +163,22 @@ static struct regulator_init_data rx51_vaux3 = { }, }; +static struct regulator_init_data rx51_vaux3_mmc = { + .constraints = { + .name = "VMMC2_30", + .min_uV = 2800000, + .max_uV = 3000000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &rx51_vmmc2_supply, +}; + static struct regulator_init_data rx51_vaux4 = { .constraints = { .name = "VCAM_ANA_28", @@ -382,10 +289,8 @@ static struct twl4030_platform_data rx51_twldata = { .vaux1 = &rx51_vaux1, .vaux2 = &rx51_vaux2, - .vaux3 = &rx51_vaux3, .vaux4 = &rx51_vaux4, .vmmc1 = &rx51_vmmc1, - .vmmc2 = &rx51_vmmc2, .vsim = &rx51_vsim, .vdac = &rx51_vdac, }; @@ -401,6 +306,13 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = { static int __init rx51_i2c_init(void) { + if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) || + system_rev >= SYSTEM_REV_B_USES_VAUX3) + rx51_twldata.vaux3 = &rx51_vaux3_mmc; + else { + rx51_twldata.vaux3 = &rx51_vaux3_cam; + rx51_twldata.vmmc2 = &rx51_vmmc2; + } omap_register_i2c_bus(1, 2600, rx51_peripherals_i2c_board_info_1, ARRAY_SIZE(rx51_peripherals_i2c_board_info_1)); omap_register_i2c_bus(2, 100, NULL, 0); @@ -408,12 +320,94 @@ static int __init rx51_i2c_init(void) return 0; } +#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ + defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) + +static struct mtd_partition onenand_partitions[] = { + { + .name = "bootloader", + .offset = 0, + .size = 0x20000, + .mask_flags = MTD_WRITEABLE, /* Force read-only */ + }, + { + .name = "config", + .offset = MTDPART_OFS_APPEND, + .size = 0x60000, + }, + { + .name = "log", + .offset = MTDPART_OFS_APPEND, + .size = 0x40000, + }, + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = 0x200000, + }, + { + .name = "initfs", + .offset = MTDPART_OFS_APPEND, + .size = 0x200000, + }, + { + .name = "rootfs", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct omap_onenand_platform_data board_onenand_data = { + .cs = 0, + .gpio_irq = 65, + .parts = onenand_partitions, + .nr_parts = ARRAY_SIZE(onenand_partitions), +}; + +static void __init board_onenand_init(void) +{ + gpmc_onenand_init(&board_onenand_data); +} + +#else + +static inline void board_onenand_init(void) +{ +} + +#endif + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) + +static struct omap_smc91x_platform_data board_smc91x_data = { + .cs = 1, + .gpio_irq = 54, + .gpio_pwrdwn = 86, + .gpio_reset = 164, + .flags = GPMC_TIMINGS_SMC91C96 | IORESOURCE_IRQ_HIGHLEVEL, +}; + +static void __init board_smc91x_init(void) +{ + omap_cfg_reg(U8_34XX_GPIO54_DOWN); + omap_cfg_reg(G25_34XX_GPIO86_OUT); + omap_cfg_reg(H19_34XX_GPIO164_OUT); + + gpmc_smc91x_init(&board_smc91x_data); +} + +#else + +static inline void board_smc91x_init(void) +{ +} + +#endif void __init rx51_peripherals_init(void) { - platform_add_devices(rx51_peripherals_devices, - ARRAY_SIZE(rx51_peripherals_devices)); rx51_i2c_init(); - rx51_init_smc91x(); + board_onenand_init(); + board_smc91x_init(); } |