diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-h4.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-h4.c | 174 |
1 files changed, 172 insertions, 2 deletions
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index a300d634d8a5..4933fce766c8 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -17,6 +17,8 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/delay.h> +#include <linux/workqueue.h> +#include <linux/input.h> #include <asm/hardware.h> #include <asm/mach-types.h> @@ -25,15 +27,57 @@ #include <asm/mach/flash.h> #include <asm/arch/gpio.h> +#include <asm/arch/gpioexpander.h> #include <asm/arch/mux.h> #include <asm/arch/usb.h> +#include <asm/arch/irda.h> #include <asm/arch/board.h> #include <asm/arch/common.h> -#include <asm/arch/prcm.h> +#include <asm/arch/keypad.h> +#include <asm/arch/menelaus.h> +#include <asm/arch/dma.h> +#include "prcm-regs.h" #include <asm/io.h> #include <asm/delay.h> +static unsigned int row_gpios[6] = { 88, 89, 124, 11, 6, 96 }; +static unsigned int col_gpios[7] = { 90, 91, 100, 36, 12, 97, 98 }; + +static int h4_keymap[] = { + KEY(0, 0, KEY_LEFT), + KEY(0, 1, KEY_RIGHT), + KEY(0, 2, KEY_A), + KEY(0, 3, KEY_B), + KEY(0, 4, KEY_C), + KEY(1, 0, KEY_DOWN), + KEY(1, 1, KEY_UP), + KEY(1, 2, KEY_E), + KEY(1, 3, KEY_F), + KEY(1, 4, KEY_G), + KEY(2, 0, KEY_ENTER), + KEY(2, 1, KEY_I), + KEY(2, 2, KEY_J), + KEY(2, 3, KEY_K), + KEY(2, 4, KEY_3), + KEY(3, 0, KEY_M), + KEY(3, 1, KEY_N), + KEY(3, 2, KEY_O), + KEY(3, 3, KEY_P), + KEY(3, 4, KEY_Q), + KEY(4, 0, KEY_R), + KEY(4, 1, KEY_4), + KEY(4, 2, KEY_T), + KEY(4, 3, KEY_U), + KEY(4, 4, KEY_ENTER), + KEY(5, 0, KEY_V), + KEY(5, 1, KEY_W), + KEY(5, 2, KEY_L), + KEY(5, 3, KEY_S), + KEY(5, 4, KEY_ENTER), + 0 +}; + static struct mtd_partition h4_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ { @@ -108,9 +152,123 @@ static struct platform_device h4_smc91x_device = { .resource = h4_smc91x_resources, }; +/* Select between the IrDA and aGPS module + */ +static int h4_select_irda(struct device *dev, int state) +{ + unsigned char expa; + int err = 0; + + if ((err = read_gpio_expa(&expa, 0x21))) { + printk(KERN_ERR "Error reading from I/O expander\n"); + return err; + } + + /* 'P6' enable/disable IRDA_TX and IRDA_RX */ + if (state & IR_SEL) { /* IrDa */ + if ((err = write_gpio_expa(expa | 0x01, 0x21))) { + printk(KERN_ERR "Error writing to I/O expander\n"); + return err; + } + } else { + if ((err = write_gpio_expa(expa & ~0x01, 0x21))) { + printk(KERN_ERR "Error writing to I/O expander\n"); + return err; + } + } + return err; +} + +static void set_trans_mode(void *data) +{ + int *mode = data; + unsigned char expa; + int err = 0; + + if ((err = read_gpio_expa(&expa, 0x20)) != 0) { + printk(KERN_ERR "Error reading from I/O expander\n"); + } + + expa &= ~0x01; + + if (!(*mode & IR_SIRMODE)) { /* MIR/FIR */ + expa |= 0x01; + } + + if ((err = write_gpio_expa(expa, 0x20)) != 0) { + printk(KERN_ERR "Error writing to I/O expander\n"); + } +} + +static int h4_transceiver_mode(struct device *dev, int mode) +{ + struct omap_irda_config *irda_config = dev->platform_data; + + cancel_delayed_work(&irda_config->gpio_expa); + PREPARE_WORK(&irda_config->gpio_expa, set_trans_mode, &mode); + schedule_work(&irda_config->gpio_expa); + + return 0; +} + +static struct omap_irda_config h4_irda_data = { + .transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE, + .transceiver_mode = h4_transceiver_mode, + .select_irda = h4_select_irda, + .rx_channel = OMAP24XX_DMA_UART3_RX, + .tx_channel = OMAP24XX_DMA_UART3_TX, + .dest_start = OMAP_UART3_BASE, + .src_start = OMAP_UART3_BASE, + .tx_trigger = OMAP24XX_DMA_UART3_TX, + .rx_trigger = OMAP24XX_DMA_UART3_RX, +}; + +static struct resource h4_irda_resources[] = { + [0] = { + .start = INT_24XX_UART3_IRQ, + .end = INT_24XX_UART3_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device h4_irda_device = { + .name = "omapirda", + .id = -1, + .dev = { + .platform_data = &h4_irda_data, + }, + .num_resources = 1, + .resource = h4_irda_resources, +}; + +static struct omap_kp_platform_data h4_kp_data = { + .rows = 6, + .cols = 7, + .keymap = h4_keymap, + .rep = 1, + .row_gpios = row_gpios, + .col_gpios = col_gpios, +}; + +static struct platform_device h4_kp_device = { + .name = "omap-keypad", + .id = -1, + .dev = { + .platform_data = &h4_kp_data, + }, +}; + +static struct platform_device h4_lcd_device = { + .name = "lcd_h4", + .id = -1, +}; + static struct platform_device *h4_devices[] __initdata = { &h4_smc91x_device, &h4_flash_device, + &h4_irda_device, + &h4_kp_device, + &h4_lcd_device, }; static inline void __init h4_init_smc91x(void) @@ -157,7 +315,6 @@ static struct omap_mmc_config h4_mmc_config __initdata = { }; static struct omap_lcd_config h4_lcd_config __initdata = { - .panel_name = "h4", .ctrl_name = "internal", }; @@ -174,6 +331,19 @@ static void __init omap_h4_init(void) * You have to mux them off in device drivers later on * if not needed. */ +#if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE) + omap_cfg_reg(K15_24XX_UART3_TX); + omap_cfg_reg(K14_24XX_UART3_RX); +#endif + +#if defined(CONFIG_KEYBOARD_OMAP) || defined(CONFIG_KEYBOARD_OMAP_MODULE) + if (omap_has_menelaus()) { + row_gpios[5] = 0; + col_gpios[2] = 15; + col_gpios[6] = 18; + } +#endif + platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices)); omap_board_config = h4_config; omap_board_config_size = ARRAY_SIZE(h4_config); |