diff options
Diffstat (limited to 'arch/arm/mach-omap1')
-rw-r--r-- | arch/arm/mach-omap1/ams-delta-fiq-handler.S | 14 | ||||
-rw-r--r-- | arch/arm/mach-omap1/ams-delta-fiq.c | 3 | ||||
-rw-r--r-- | arch/arm/mach-omap1/board-ams-delta.c | 275 | ||||
-rw-r--r-- | arch/arm/mach-omap1/board-ams-delta.h (renamed from arch/arm/mach-omap1/include/mach/board-ams-delta.h) | 31 | ||||
-rw-r--r-- | arch/arm/mach-omap1/board-fsample.c | 5 | ||||
-rw-r--r-- | arch/arm/mach-omap1/board-h2.c | 5 | ||||
-rw-r--r-- | arch/arm/mach-omap1/board-h3.c | 4 | ||||
-rw-r--r-- | arch/arm/mach-omap1/board-nand.c | 5 | ||||
-rw-r--r-- | arch/arm/mach-omap1/board-palmte.c | 29 | ||||
-rw-r--r-- | arch/arm/mach-omap1/board-perseus2.c | 5 | ||||
-rw-r--r-- | arch/arm/mach-omap1/clock.c | 14 | ||||
-rw-r--r-- | arch/arm/mach-omap1/common.h | 4 | ||||
-rw-r--r-- | arch/arm/mach-omap1/devices.c | 3 | ||||
-rw-r--r-- | arch/arm/mach-omap1/id.c | 6 | ||||
-rw-r--r-- | arch/arm/mach-omap1/pm.c | 13 |
15 files changed, 182 insertions, 234 deletions
diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S index ddc27638ba2a..7c9fb7fe0070 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S +++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S @@ -15,26 +15,20 @@ #include <linux/linkage.h> #include <linux/platform_data/ams-delta-fiq.h> +#include <linux/platform_data/gpio-omap.h> #include <asm/assembler.h> -#include <mach/board-ams-delta.h> #include "ams-delta-fiq.h" +#include "board-ams-delta.h" #include "iomap.h" #include "soc.h" /* - * GPIO related definitions, copied from arch/arm/plat-omap/gpio.c. - * Unfortunately, those were not placed in a separate header file. + * OMAP1510 GPIO related symbol copied from arch/arm/mach-omap1/gpio15xx.c. + * Unfortunately, it was not placed in a separate header file. */ #define OMAP1510_GPIO_BASE 0xFFFCE000 -#define OMAP1510_GPIO_DATA_INPUT 0x00 -#define OMAP1510_GPIO_DATA_OUTPUT 0x04 -#define OMAP1510_GPIO_DIR_CONTROL 0x08 -#define OMAP1510_GPIO_INT_CONTROL 0x0c -#define OMAP1510_GPIO_INT_MASK 0x10 -#define OMAP1510_GPIO_INT_STATUS 0x14 -#define OMAP1510_GPIO_PIN_CONTROL 0x18 /* GPIO register bitmasks */ #define KEYBRD_DATA_MASK (0x1 << AMS_DELTA_GPIO_PIN_KEYBRD_DATA) diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c index b0dc7ddf5877..14c3d3f5255e 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq.c +++ b/arch/arm/mach-omap1/ams-delta-fiq.c @@ -22,11 +22,10 @@ #include <linux/platform_data/ams-delta-fiq.h> #include <linux/platform_device.h> -#include <mach/board-ams-delta.h> - #include <asm/fiq.h> #include "ams-delta-fiq.h" +#include "board-ams-delta.h" static struct fiq_handler fh = { .name = "ams-delta-fiq" diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index dd28d2614d7f..1947bc63074e 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -36,7 +36,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/board-ams-delta.h> #include <linux/platform_data/keypad-omap.h> #include <mach/mux.h> @@ -45,6 +44,7 @@ #include <mach/usb.h> #include "ams-delta-fiq.h" +#include "board-ams-delta.h" #include "iomap.h" #include "common.h" @@ -167,7 +167,6 @@ static struct omap_usb_config ams_delta_usb_config __initdata = { .pins[0] = 2, }; -#define LATCH1_GPIO_BASE 232 #define LATCH1_NGPIO 8 static struct resource latch1_resources[] = { @@ -183,7 +182,6 @@ static struct resource latch1_resources[] = { static struct bgpio_pdata latch1_pdata = { .label = LATCH1_LABEL, - .base = LATCH1_GPIO_BASE, .ngpio = LATCH1_NGPIO, }; @@ -206,11 +204,13 @@ static struct platform_device latch1_gpio_device = { #define LATCH1_PIN_DOCKIT1 6 #define LATCH1_PIN_DOCKIT2 7 +#define LATCH2_NGPIO 16 + static struct resource latch2_resources[] = { [0] = { .name = "dat", .start = LATCH2_PHYS, - .end = LATCH2_PHYS + (AMS_DELTA_LATCH2_NGPIO - 1) / 8, + .end = LATCH2_PHYS + (LATCH2_NGPIO - 1) / 8, .flags = IORESOURCE_MEM, }, }; @@ -219,8 +219,7 @@ static struct resource latch2_resources[] = { static struct bgpio_pdata latch2_pdata = { .label = LATCH2_LABEL, - .base = AMS_DELTA_LATCH2_GPIO_BASE, - .ngpio = AMS_DELTA_LATCH2_NGPIO, + .ngpio = LATCH2_NGPIO, }; static struct platform_device latch2_gpio_device = { @@ -250,39 +249,6 @@ static struct platform_device latch2_gpio_device = { #define LATCH2_PIN_HOOKFLASH1 14 #define LATCH2_PIN_HOOKFLASH2 15 -static const struct gpio latch_gpios[] __initconst = { - { - .gpio = LATCH1_GPIO_BASE + 6, - .flags = GPIOF_OUT_INIT_LOW, - .label = "dockit1", - }, - { - .gpio = LATCH1_GPIO_BASE + 7, - .flags = GPIOF_OUT_INIT_LOW, - .label = "dockit2", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_SCARD_RSTIN, - .flags = GPIOF_OUT_INIT_LOW, - .label = "scard_rstin", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_SCARD_CMDVCC, - .flags = GPIOF_OUT_INIT_LOW, - .label = "scard_cmdvcc", - }, - { - .gpio = AMS_DELTA_LATCH2_GPIO_BASE + 14, - .flags = GPIOF_OUT_INIT_LOW, - .label = "hookflash1", - }, - { - .gpio = AMS_DELTA_LATCH2_GPIO_BASE + 15, - .flags = GPIOF_OUT_INIT_LOW, - .label = "hookflash2", - }, -}; - static struct regulator_consumer_supply modem_nreset_consumers[] = { REGULATOR_SUPPLY("RESET#", "serial8250.1"), REGULATOR_SUPPLY("POR", "cx20442-codec"), @@ -300,7 +266,6 @@ static struct regulator_init_data modem_nreset_data = { static struct fixed_voltage_config modem_nreset_config = { .supply_name = "modem_nreset", .microvolts = 3300000, - .gpio = AMS_DELTA_GPIO_PIN_MODEM_NRESET, .startup_delay = 25000, .enable_high = 1, .enabled_at_boot = 1, @@ -315,26 +280,21 @@ static struct platform_device modem_nreset_device = { }, }; +static struct gpiod_lookup_table ams_delta_nreset_gpiod_table = { + .dev_id = "reg-fixed-voltage", + .table = { + GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_MODEM_NRESET, + NULL, GPIO_ACTIVE_HIGH), + { }, + }, +}; + struct modem_private_data { struct regulator *regulator; }; static struct modem_private_data modem_priv; -void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value) -{ - int bit = 0; - u16 bitpos = 1 << bit; - - for (; bit < ngpio; bit++, bitpos = bitpos << 1) { - if (!(mask & bitpos)) - continue; - else - gpio_set_value(base + bit, (value & bitpos) != 0); - } -} -EXPORT_SYMBOL(ams_delta_latch_write); - static struct resource ams_delta_nand_resources[] = { [0] = { .start = OMAP1_MPUIO_BASE, @@ -410,15 +370,9 @@ static struct gpiod_lookup_table ams_delta_lcd_gpio_table = { }, }; -/* - * Dynamically allocated GPIO numbers must be obtained fromm GPIO device - * before they can be put in the gpio_led table. Before that happens, - * initialize the table with invalid GPIO numbers, not 0. - */ static struct gpio_led gpio_leds[] __initdata = { [LATCH1_PIN_LED_CAMERA] = { .name = "camera", - .gpio = -EINVAL, .default_state = LEDS_GPIO_DEFSTATE_OFF, #ifdef CONFIG_LEDS_TRIGGERS .default_trigger = "ams_delta_camera", @@ -426,27 +380,22 @@ static struct gpio_led gpio_leds[] __initdata = { }, [LATCH1_PIN_LED_ADVERT] = { .name = "advert", - .gpio = -EINVAL, .default_state = LEDS_GPIO_DEFSTATE_OFF, }, [LATCH1_PIN_LED_MAIL] = { .name = "email", - .gpio = -EINVAL, .default_state = LEDS_GPIO_DEFSTATE_OFF, }, [LATCH1_PIN_LED_HANDSFREE] = { .name = "handsfree", - .gpio = -EINVAL, .default_state = LEDS_GPIO_DEFSTATE_OFF, }, [LATCH1_PIN_LED_VOICEMAIL] = { .name = "voicemail", - .gpio = -EINVAL, .default_state = LEDS_GPIO_DEFSTATE_OFF, }, [LATCH1_PIN_LED_VOICE] = { .name = "voice", - .gpio = -EINVAL, .default_state = LEDS_GPIO_DEFSTATE_OFF, }, }; @@ -456,6 +405,24 @@ static const struct gpio_led_platform_data leds_pdata __initconst = { .num_leds = ARRAY_SIZE(gpio_leds), }; +static struct gpiod_lookup_table leds_gpio_table = { + .table = { + GPIO_LOOKUP_IDX(LATCH1_LABEL, LATCH1_PIN_LED_CAMERA, NULL, + LATCH1_PIN_LED_CAMERA, 0), + GPIO_LOOKUP_IDX(LATCH1_LABEL, LATCH1_PIN_LED_ADVERT, NULL, + LATCH1_PIN_LED_ADVERT, 0), + GPIO_LOOKUP_IDX(LATCH1_LABEL, LATCH1_PIN_LED_MAIL, NULL, + LATCH1_PIN_LED_MAIL, 0), + GPIO_LOOKUP_IDX(LATCH1_LABEL, LATCH1_PIN_LED_HANDSFREE, NULL, + LATCH1_PIN_LED_HANDSFREE, 0), + GPIO_LOOKUP_IDX(LATCH1_LABEL, LATCH1_PIN_LED_VOICEMAIL, NULL, + LATCH1_PIN_LED_VOICEMAIL, 0), + GPIO_LOOKUP_IDX(LATCH1_LABEL, LATCH1_PIN_LED_VOICE, NULL, + LATCH1_PIN_LED_VOICE, 0), + { }, + }, +}; + static struct i2c_board_info ams_delta_camera_board_info[] = { { I2C_BOARD_INFO("ov6650", 0x60), @@ -568,7 +535,6 @@ static struct regulator_init_data keybrd_pwr_initdata = { static struct fixed_voltage_config keybrd_pwr_config = { .supply_name = "keybrd_pwr", .microvolts = 5000000, - .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_PWR, .enable_high = 1, .init_data = &keybrd_pwr_initdata, }; @@ -602,6 +568,7 @@ static struct platform_device *ams_delta_devices[] __initdata = { }; static struct gpiod_lookup_table *ams_delta_gpio_tables[] __initdata = { + &ams_delta_nreset_gpiod_table, &ams_delta_audio_gpio_table, &keybrd_pwr_gpio_table, &ams_delta_lcd_gpio_table, @@ -630,6 +597,28 @@ static struct gpiod_hog ams_delta_gpio_hogs[] = { {}, }; +static struct plat_serial8250_port ams_delta_modem_ports[]; + +/* + * Obtain MODEM IRQ GPIO descriptor using its hardware pin + * number and assign related IRQ number to the MODEM port. + * Keep the GPIO descriptor open so nobody steps in. + */ +static void __init modem_assign_irq(struct gpio_chip *chip) +{ + struct gpio_desc *gpiod; + + gpiod = gpiochip_request_own_desc(chip, AMS_DELTA_GPIO_PIN_MODEM_IRQ, + "modem_irq"); + if (IS_ERR(gpiod)) { + pr_err("%s: modem IRQ GPIO request failed (%ld)\n", __func__, + PTR_ERR(gpiod)); + } else { + gpiod_direction_input(gpiod); + ams_delta_modem_ports[0].irq = gpiod_to_irq(gpiod); + } +} + /* * The purpose of this function is to take care of proper initialization of * devices and data structures which depend on GPIO lines provided by OMAP GPIO @@ -649,11 +638,53 @@ static void __init omap_gpio_deps_init(void) return; } + /* + * Start with FIQ initialization as it may have to request + * and release successfully each OMAP GPIO pin in turn. + */ ams_delta_init_fiq(chip, &ams_delta_serio_device); + + modem_assign_irq(chip); +} + +/* + * Initialize latch2 pins with values which are safe for dependent on-board + * devices or useful for their successull initialization even before GPIO + * driver takes control over the latch pins: + * - LATCH2_PIN_LCD_VBLEN = 0 + * - LATCH2_PIN_LCD_NDISP = 0 Keep LCD device powered off before its + * driver takes control over it. + * - LATCH2_PIN_NAND_NCE = 0 + * - LATCH2_PIN_NAND_NWP = 0 Keep NAND device down and write- + * protected before its driver takes + * control over it. + * - LATCH2_PIN_KEYBRD_PWR = 0 Keep keyboard powered off before serio + * driver takes control over it. + * - LATCH2_PIN_KEYBRD_DATAOUT = 0 Keep low to avoid corruption of first + * byte of data received from attached + * keyboard when serio device is probed; + * the pin is also hogged low by the latch2 + * GPIO driver as soon as it is ready. + * - LATCH2_PIN_MODEM_NRESET = 1 Enable voice MODEM device, allowing for + * its successful probe even before a + * regulator it depends on, which in turn + * takes control over the pin, is set up. + * - LATCH2_PIN_MODEM_CODEC = 1 Attach voice MODEM CODEC data port + * to the MODEM so the CODEC is under + * control even if audio driver doesn't + * take it over. + */ +static void __init ams_delta_latch2_init(void) +{ + u16 latch2 = 1 << LATCH2_PIN_MODEM_NRESET | 1 << LATCH2_PIN_MODEM_CODEC; + + __raw_writew(latch2, LATCH2_VIRT); } static void __init ams_delta_init(void) { + struct platform_device *leds_pdev; + /* mux pins for uarts */ omap_cfg_reg(UART1_TX); omap_cfg_reg(UART1_RTS); @@ -673,6 +704,7 @@ static void __init ams_delta_init(void) omap_cfg_reg(J18_1610_CAM_D7); omap_gpio_deps_init(); + ams_delta_latch2_init(); gpiod_add_hogs(ams_delta_gpio_hogs); omap_serial_init(); @@ -716,6 +748,12 @@ static void __init ams_delta_init(void) gpiod_add_lookup_tables(ams_delta_gpio_tables, ARRAY_SIZE(ams_delta_gpio_tables)); + leds_pdev = gpio_led_register_device(PLATFORM_DEVID_NONE, &leds_pdata); + if (!IS_ERR(leds_pdev)) { + leds_gpio_table.dev_id = dev_name(&leds_pdev->dev); + gpiod_add_lookup_table(&leds_gpio_table); + } + omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1); omapfb_set_lcd_config(&ams_delta_lcd_config); @@ -749,7 +787,7 @@ static struct plat_serial8250_port ams_delta_modem_ports[] = { { .membase = IOMEM(MODEM_VIRT), .mapbase = MODEM_PHYS, - .irq = -EINVAL, /* changed later */ + .irq = IRQ_NOTCONNECTED, /* changed later */ .flags = UPF_BOOT_AUTOCONF, .irqflags = IRQF_TRIGGER_RISING, .iotype = UPIO_MEM, @@ -769,69 +807,6 @@ static struct platform_device ams_delta_modem_device = { }, }; -/* - * leds-gpio driver doesn't make use of GPIO lookup tables, - * it has to be provided with GPIO numbers over platform data - * if GPIO descriptor info can't be obtained from device tree. - * We could either define GPIO lookup tables and use them on behalf - * of the leds-gpio device, or we can use GPIO driver level methods - * for identification of GPIO numbers as long as we don't support - * device tree. Let's do the latter. - */ -static void __init ams_delta_led_init(struct gpio_chip *chip) -{ - struct gpio_desc *gpiod; - int i; - - for (i = LATCH1_PIN_LED_CAMERA; i < LATCH1_PIN_DOCKIT1; i++) { - gpiod = gpiochip_request_own_desc(chip, i, NULL); - if (IS_ERR(gpiod)) { - pr_warn("%s: %s GPIO %d request failed (%ld)\n", - __func__, LATCH1_LABEL, i, PTR_ERR(gpiod)); - continue; - } - - /* Assign GPIO numbers to LED device. */ - gpio_leds[i].gpio = desc_to_gpio(gpiod); - - gpiochip_free_own_desc(gpiod); - } - - gpio_led_register_device(PLATFORM_DEVID_NONE, &leds_pdata); -} - -/* - * The purpose of this function is to take care of assignment of GPIO numbers - * to platform devices which depend on GPIO lines provided by Amstrad Delta - * latch1 and/or latch2 GPIO devices but don't use GPIO lookup tables. - * The function may be called as soon as latch1/latch2 GPIO devices are - * initilized. Since basic-mmio-gpio driver is not registered before - * device_initcall, this may happen at erliest during device_initcall_sync. - * Dependent devices shouldn't be registered before that, their - * registration may be performed from within this function or later. - */ -static int __init ams_delta_gpio_init(void) -{ - struct gpio_chip *chip; - int err; - - if (!machine_is_ams_delta()) - return -ENODEV; - - chip = gpiochip_find(LATCH1_LABEL, gpiochip_match_by_label); - if (!chip) - pr_err("%s: latch1 GPIO chip not found\n", __func__); - else - ams_delta_led_init(chip); - - err = gpio_request_array(latch_gpios, ARRAY_SIZE(latch_gpios)); - if (err) - pr_err("Couldn't take over latch1/latch2 GPIO pins\n"); - - return err; -} -device_initcall_sync(ams_delta_gpio_init); - static int __init modem_nreset_init(void) { int err; @@ -844,33 +819,40 @@ static int __init modem_nreset_init(void) } +/* + * This function expects MODEM IRQ number already assigned to the port. + * The MODEM device requires its RESET# pin kept high during probe. + * That requirement can be fulfilled in several ways: + * - with a descriptor of already functional modem_nreset regulator + * assigned to the MODEM private data, + * - with the regulator not yet controlled by modem_pm function but + * already enabled by default on probe, + * - before the modem_nreset regulator is probed, with the pin already + * set high explicitly. + * The last one is already guaranteed by ams_delta_latch2_init() called + * from machine_init. + * In order to avoid taking over ttyS0 device slot, the MODEM device + * should be registered after OMAP serial ports. Since those ports + * are registered at arch_initcall, this function can be called safely + * at arch_initcall_sync earliest. + */ static int __init ams_delta_modem_init(void) { int err; - omap_cfg_reg(M14_1510_GPIO2); - ams_delta_modem_ports[0].irq = - gpio_to_irq(AMS_DELTA_GPIO_PIN_MODEM_IRQ); + if (!machine_is_ams_delta()) + return -ENODEV; - err = gpio_request(AMS_DELTA_GPIO_PIN_MODEM_IRQ, "modem"); - if (err) { - pr_err("Couldn't request gpio pin for modem\n"); - return err; - } - gpio_direction_input(AMS_DELTA_GPIO_PIN_MODEM_IRQ); + omap_cfg_reg(M14_1510_GPIO2); /* Initialize the modem_nreset regulator consumer before use */ modem_priv.regulator = ERR_PTR(-ENODEV); - ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_CODEC, - AMS_DELTA_LATCH2_MODEM_CODEC); - err = platform_device_register(&ams_delta_modem_device); - if (err) - gpio_free(AMS_DELTA_GPIO_PIN_MODEM_IRQ); return err; } +arch_initcall_sync(ams_delta_modem_init); static int __init late_init(void) { @@ -880,10 +862,6 @@ static int __init late_init(void) if (err) return err; - err = ams_delta_modem_init(); - if (err) - return err; - /* * Once the modem device is registered, the modem_nreset * regulator can be requested on behalf of that device. @@ -898,7 +876,6 @@ static int __init late_init(void) unregister: platform_device_unregister(&ams_delta_modem_device); - gpio_free(AMS_DELTA_GPIO_PIN_MODEM_IRQ); return err; } diff --git a/arch/arm/mach-omap1/include/mach/board-ams-delta.h b/arch/arm/mach-omap1/board-ams-delta.h index ad6f865d1f16..b5c4a373b905 100644 --- a/arch/arm/mach-omap1/include/mach/board-ams-delta.h +++ b/arch/arm/mach-omap1/board-ams-delta.h @@ -1,5 +1,5 @@ /* - * arch/arm/plat-omap/include/mach/board-ams-delta.h + * arch/arm/mach-omap1/board-ams-delta.h * * Copyright (C) 2006 Jonathan McDowell <noodles@earth.li> * @@ -28,10 +28,6 @@ #if defined (CONFIG_MACH_AMS_DELTA) -#define AMD_DELTA_LATCH2_SCARD_RSTIN 0x0400 -#define AMD_DELTA_LATCH2_SCARD_CMDVCC 0x0800 -#define AMS_DELTA_LATCH2_MODEM_CODEC 0x2000 - #define AMS_DELTA_GPIO_PIN_KEYBRD_DATA 0 #define AMS_DELTA_GPIO_PIN_KEYBRD_CLK 1 #define AMS_DELTA_GPIO_PIN_MODEM_IRQ 2 @@ -41,31 +37,6 @@ #define AMS_DELTA_GPIO_PIN_CONFIG 11 #define AMS_DELTA_GPIO_PIN_NAND_RB 12 -#define AMS_DELTA_GPIO_PIN_LCD_VBLEN 240 -#define AMS_DELTA_GPIO_PIN_LCD_NDISP 241 -#define AMS_DELTA_GPIO_PIN_NAND_NCE 242 -#define AMS_DELTA_GPIO_PIN_NAND_NRE 243 -#define AMS_DELTA_GPIO_PIN_NAND_NWP 244 -#define AMS_DELTA_GPIO_PIN_NAND_NWE 245 -#define AMS_DELTA_GPIO_PIN_NAND_ALE 246 -#define AMS_DELTA_GPIO_PIN_NAND_CLE 247 -#define AMS_DELTA_GPIO_PIN_KEYBRD_PWR 248 -#define AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT 249 -#define AMS_DELTA_GPIO_PIN_SCARD_RSTIN 250 -#define AMS_DELTA_GPIO_PIN_SCARD_CMDVCC 251 -#define AMS_DELTA_GPIO_PIN_MODEM_NRESET 252 -#define AMS_DELTA_GPIO_PIN_MODEM_CODEC 253 - -#define AMS_DELTA_LATCH2_GPIO_BASE AMS_DELTA_GPIO_PIN_LCD_VBLEN -#define AMS_DELTA_LATCH2_NGPIO 16 - -#ifndef __ASSEMBLY__ -void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value); -#define ams_delta_latch2_write(mask, value) \ - ams_delta_latch_write(AMS_DELTA_LATCH2_GPIO_BASE, \ - AMS_DELTA_LATCH2_NGPIO, (mask), (value)) -#endif - #endif /* CONFIG_MACH_AMS_DELTA */ #endif /* __ASM_ARCH_OMAP_AMS_DELTA_H */ diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 69bd601feb83..4a0a66815ca0 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -16,8 +16,7 @@ #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/mtd/mtd.h> -#include <linux/mtd/rawnand.h> -#include <linux/mtd/partitions.h> +#include <linux/mtd/platnand.h> #include <linux/mtd/physmap.h> #include <linux/input.h> #include <linux/smc91x.h> @@ -186,7 +185,7 @@ static struct platform_device nor_device = { #define FSAMPLE_NAND_RB_GPIO_PIN 62 -static int nand_dev_ready(struct mtd_info *mtd) +static int nand_dev_ready(struct nand_chip *chip) { return gpio_get_value(FSAMPLE_NAND_RB_GPIO_PIN); } diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 9aeb8ad8c327..9d9a6ca15df0 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -24,8 +24,7 @@ #include <linux/delay.h> #include <linux/i2c.h> #include <linux/mtd/mtd.h> -#include <linux/mtd/rawnand.h> -#include <linux/mtd/partitions.h> +#include <linux/mtd/platnand.h> #include <linux/mtd/physmap.h> #include <linux/input.h> #include <linux/mfd/tps65010.h> @@ -182,7 +181,7 @@ static struct mtd_partition h2_nand_partitions[] = { #define H2_NAND_RB_GPIO_PIN 62 -static int h2_nand_dev_ready(struct mtd_info *mtd) +static int h2_nand_dev_ready(struct nand_chip *chip) { return gpio_get_value(H2_NAND_RB_GPIO_PIN); } diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 2edcd6356f2d..cd6e02c5c01a 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -23,7 +23,7 @@ #include <linux/workqueue.h> #include <linux/i2c.h> #include <linux/mtd/mtd.h> -#include <linux/mtd/rawnand.h> +#include <linux/mtd/platnand.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/input.h> @@ -185,7 +185,7 @@ static struct mtd_partition nand_partitions[] = { #define H3_NAND_RB_GPIO_PIN 10 -static int nand_dev_ready(struct mtd_info *mtd) +static int nand_dev_ready(struct nand_chip *chip) { return gpio_get_value(H3_NAND_RB_GPIO_PIN); } diff --git a/arch/arm/mach-omap1/board-nand.c b/arch/arm/mach-omap1/board-nand.c index 1bffbb4e050f..20923eb2d9b6 100644 --- a/arch/arm/mach-omap1/board-nand.c +++ b/arch/arm/mach-omap1/board-nand.c @@ -20,9 +20,8 @@ #include "common.h" -void omap1_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +void omap1_nand_cmd_ctl(struct nand_chip *this, int cmd, unsigned int ctrl) { - struct nand_chip *this = mtd_to_nand(mtd); unsigned long mask; if (cmd == NAND_CMD_NONE) @@ -32,6 +31,6 @@ void omap1_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) if (ctrl & NAND_ALE) mask |= 0x04; - writeb(cmd, this->IO_ADDR_W + mask); + writeb(cmd, this->legacy.IO_ADDR_W + mask); } diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 2dc5deb19803..d4d8a32e57eb 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -43,6 +43,7 @@ #include <mach/hardware.h> #include <mach/usb.h> +#include "mmc.h" #include "common.h" #define PALMTE_USBDETECT_GPIO 0 @@ -208,6 +209,33 @@ static void __init palmte_misc_gpio_setup(void) gpio_direction_input(PALMTE_USB_OR_DC_GPIO); } +#if IS_ENABLED(CONFIG_MMC_OMAP) + +static struct omap_mmc_platform_data _palmte_mmc_config = { + .nr_slots = 1, + .slots[0] = { + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .name = "mmcblk", + }, +}; + +static struct omap_mmc_platform_data *palmte_mmc_config[OMAP15XX_NR_MMC] = { + [0] = &_palmte_mmc_config, +}; + +static void palmte_mmc_init(void) +{ + omap1_init_mmc(palmte_mmc_config, OMAP15XX_NR_MMC); +} + +#else /* CONFIG_MMC_OMAP */ + +static void palmte_mmc_init(void) +{ +} + +#endif /* CONFIG_MMC_OMAP */ + static void __init omap_palmte_init(void) { /* mux pins for uarts */ @@ -228,6 +256,7 @@ static void __init omap_palmte_init(void) omap_register_i2c_bus(1, 100, NULL, 0); omapfb_set_lcd_config(&palmte_lcd_config); + palmte_mmc_init(); } MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E") diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index b4951eb82898..06a584fef5b8 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -16,8 +16,7 @@ #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/mtd/mtd.h> -#include <linux/mtd/rawnand.h> -#include <linux/mtd/partitions.h> +#include <linux/mtd/platnand.h> #include <linux/mtd/physmap.h> #include <linux/input.h> #include <linux/smc91x.h> @@ -144,7 +143,7 @@ static struct platform_device nor_device = { #define P2_NAND_RB_GPIO_PIN 62 -static int nand_dev_ready(struct mtd_info *mtd) +static int nand_dev_ready(struct nand_chip *chip) { return gpio_get_value(P2_NAND_RB_GPIO_PIN); } diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index fa512413a471..c8c6fe88b2d6 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -968,7 +968,7 @@ late_initcall(omap_clk_enable_autoidle_all); static struct dentry *clk_debugfs_root; -static int clk_dbg_show_summary(struct seq_file *s, void *unused) +static int debug_clock_show(struct seq_file *s, void *unused) { struct clk *c; struct clk *pa; @@ -988,17 +988,7 @@ static int clk_dbg_show_summary(struct seq_file *s, void *unused) return 0; } -static int clk_dbg_open(struct inode *inode, struct file *file) -{ - return single_open(file, clk_dbg_show_summary, inode->i_private); -} - -static const struct file_operations debug_clock_fops = { - .open = clk_dbg_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; +DEFINE_SHOW_ATTRIBUTE(debug_clock); static int clk_debugfs_register_one(struct clk *c) { diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h index c6537d2c2859..504b959ba5cf 100644 --- a/arch/arm/mach-omap1/common.h +++ b/arch/arm/mach-omap1/common.h @@ -26,7 +26,6 @@ #ifndef __ARCH_ARM_MACH_OMAP1_COMMON_H #define __ARCH_ARM_MACH_OMAP1_COMMON_H -#include <linux/mtd/mtd.h> #include <linux/platform_data/i2c-omap.h> #include <linux/reboot.h> @@ -82,7 +81,8 @@ void omap1_restart(enum reboot_mode, const char *); extern void __init omap_check_revision(void); -extern void omap1_nand_cmd_ctl(struct mtd_info *mtd, int cmd, +struct nand_chip; +extern void omap1_nand_cmd_ctl(struct nand_chip *this, int cmd, unsigned int ctrl); extern void omap1_timer_init(void); diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index baaf902b7016..e1243b5d554f 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -244,6 +244,9 @@ struct platform_device omap_spi2 = { static void omap_init_spi100k(void) { + if (!cpu_is_omap7xx()) + return; + omap_spi1.dev.platform_data = ioremap(OMAP7XX_SPI1_BASE, 0x7ff); if (omap_spi1.dev.platform_data) platform_device_register(&omap_spi1); diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c index 52de382fc804..7e49dfda3d2f 100644 --- a/arch/arm/mach-omap1/id.c +++ b/arch/arm/mach-omap1/id.c @@ -200,10 +200,10 @@ void __init omap_check_revision(void) printk(KERN_INFO "Unknown OMAP cpu type: 0x%02x\n", cpu_type); } - printk(KERN_INFO "OMAP%04x", omap_revision >> 16); + pr_info("OMAP%04x", omap_revision >> 16); if ((omap_revision >> 8) & 0xff) - printk(KERN_INFO "%x", (omap_revision >> 8) & 0xff); - printk(KERN_INFO " revision %i handled as %02xxx id: %08x%08x\n", + pr_cont("%x", (omap_revision >> 8) & 0xff); + pr_cont(" revision %i handled as %02xxx id: %08x%08x\n", die_rev, omap_revision & 0xff, system_serial_low, system_serial_high); } diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 3e1de14805e4..998075d3ef86 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -532,18 +532,7 @@ static int omap_pm_debug_show(struct seq_file *m, void *v) return 0; } -static int omap_pm_debug_open(struct inode *inode, struct file *file) -{ - return single_open(file, omap_pm_debug_show, - &inode->i_private); -} - -static const struct file_operations omap_pm_debug_fops = { - .open = omap_pm_debug_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; +DEFINE_SHOW_ATTRIBUTE(omap_pm_debug); static void omap_pm_init_debugfs(void) { |