diff options
Diffstat (limited to 'arch/arm/mach-davinci')
-rw-r--r-- | arch/arm/mach-davinci/Kconfig | 6 | ||||
-rw-r--r-- | arch/arm/mach-davinci/board-mityomapl138.c | 4 | ||||
-rw-r--r-- | arch/arm/mach-davinci/cpufreq.c | 4 | ||||
-rw-r--r-- | arch/arm/mach-davinci/devices-da8xx.c | 12 | ||||
-rw-r--r-- | arch/arm/mach-davinci/include/mach/debug-macro.S | 13 | ||||
-rw-r--r-- | arch/arm/mach-davinci/include/mach/memory.h | 18 | ||||
-rw-r--r-- | arch/arm/mach-davinci/include/mach/serial.h | 2 |
7 files changed, 28 insertions, 31 deletions
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 32f147998cd9..c0deacae778d 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -63,6 +63,7 @@ config MACH_DAVINCI_EVM depends on ARCH_DAVINCI_DM644x select MISC_DEVICES select EEPROM_AT24 + select I2C help Configure this option to specify the whether the board used for development is a DM644x EVM @@ -72,6 +73,7 @@ config MACH_SFFSDR depends on ARCH_DAVINCI_DM644x select MISC_DEVICES select EEPROM_AT24 + select I2C help Say Y here to select the Lyrtech Small Form Factor Software Defined Radio (SFFSDR) board. @@ -105,6 +107,7 @@ config MACH_DAVINCI_DM6467_EVM select MACH_DAVINCI_DM6467TEVM select MISC_DEVICES select EEPROM_AT24 + select I2C help Configure this option to specify the whether the board used for development is a DM6467 EVM @@ -118,6 +121,7 @@ config MACH_DAVINCI_DM365_EVM depends on ARCH_DAVINCI_DM365 select MISC_DEVICES select EEPROM_AT24 + select I2C help Configure this option to specify whether the board used for development is a DM365 EVM @@ -129,6 +133,7 @@ config MACH_DAVINCI_DA830_EVM select GPIO_PCF857X select MISC_DEVICES select EEPROM_AT24 + select I2C help Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module. @@ -205,6 +210,7 @@ config MACH_MITYOMAPL138 depends on ARCH_DAVINCI_DA850 select MISC_DEVICES select EEPROM_AT24 + select I2C help Say Y here to select the Critical Link MityDSP-L138/MityARM-1808 System on Module. Information on this SoM may be found at diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c index 2aa79c54f98e..606a6f27ed6c 100644 --- a/arch/arm/mach-davinci/board-mityomapl138.c +++ b/arch/arm/mach-davinci/board-mityomapl138.c @@ -29,7 +29,7 @@ #include <mach/mux.h> #include <mach/spi.h> -#define MITYOMAPL138_PHY_ID "0:03" +#define MITYOMAPL138_PHY_ID "" #define FACTORY_CONFIG_MAGIC 0x012C0138 #define FACTORY_CONFIG_VERSION 0x00010001 @@ -414,7 +414,7 @@ static struct resource mityomapl138_nandflash_resource[] = { static struct platform_device mityomapl138_nandflash_device = { .name = "davinci_nand", - .id = 0, + .id = 1, .dev = { .platform_data = &mityomapl138_nandflash_data, }, diff --git a/arch/arm/mach-davinci/cpufreq.c b/arch/arm/mach-davinci/cpufreq.c index 0a95be1512bb..41669ecc1f91 100644 --- a/arch/arm/mach-davinci/cpufreq.c +++ b/arch/arm/mach-davinci/cpufreq.c @@ -94,9 +94,7 @@ static int davinci_target(struct cpufreq_policy *policy, if (freqs.old == freqs.new) return ret; - cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, - dev_driver_string(cpufreq.dev), - "transition: %u --> %u\n", freqs.old, freqs.new); + dev_dbg(&cpufreq.dev, "transition: %u --> %u\n", freqs.old, freqs.new); ret = cpufreq_frequency_table_target(policy, pdata->freq_table, freqs.new, relation, &idx); diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 625d4b66718b..58a02dc7b15a 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -39,7 +39,8 @@ #define DA8XX_GPIO_BASE 0x01e26000 #define DA8XX_I2C1_BASE 0x01e28000 #define DA8XX_SPI0_BASE 0x01c41000 -#define DA8XX_SPI1_BASE 0x01f0e000 +#define DA830_SPI1_BASE 0x01e12000 +#define DA850_SPI1_BASE 0x01f0e000 #define DA8XX_EMAC_CTRL_REG_OFFSET 0x3000 #define DA8XX_EMAC_MOD_REG_OFFSET 0x2000 @@ -762,8 +763,8 @@ static struct resource da8xx_spi0_resources[] = { static struct resource da8xx_spi1_resources[] = { [0] = { - .start = DA8XX_SPI1_BASE, - .end = DA8XX_SPI1_BASE + SZ_4K - 1, + .start = DA830_SPI1_BASE, + .end = DA830_SPI1_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -832,5 +833,10 @@ int __init da8xx_register_spi(int instance, struct spi_board_info *info, da8xx_spi_pdata[instance].num_chipselect = len; + if (instance == 1 && cpu_is_davinci_da850()) { + da8xx_spi1_resources[0].start = DA850_SPI1_BASE; + da8xx_spi1_resources[0].end = DA850_SPI1_BASE + SZ_4K - 1; + } + return platform_device_register(&da8xx_spi_device[instance]); } diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S index 9f1befc5ac38..f8b7ea4f6235 100644 --- a/arch/arm/mach-davinci/include/mach/debug-macro.S +++ b/arch/arm/mach-davinci/include/mach/debug-macro.S @@ -24,6 +24,9 @@ #define UART_SHIFT 2 +#define davinci_uart_v2p(x) ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET) +#define davinci_uart_p2v(x) ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET) + .pushsection .data davinci_uart_phys: .word 0 davinci_uart_virt: .word 0 @@ -34,7 +37,7 @@ davinci_uart_virt: .word 0 /* Use davinci_uart_phys/virt if already configured */ 10: mrc p15, 0, \rp, c1, c0 tst \rp, #1 @ MMU enabled? - ldreq \rp, =__virt_to_phys(davinci_uart_phys) + ldreq \rp, =davinci_uart_v2p(davinci_uart_phys) ldrne \rp, =davinci_uart_phys add \rv, \rp, #4 @ davinci_uart_virt ldr \rp, [\rp, #0] @@ -48,18 +51,18 @@ davinci_uart_virt: .word 0 tst \rp, #1 @ MMU enabled? /* Copy uart phys address from decompressor uart info */ - ldreq \rv, =__virt_to_phys(davinci_uart_phys) + ldreq \rv, =davinci_uart_v2p(davinci_uart_phys) ldrne \rv, =davinci_uart_phys ldreq \rp, =DAVINCI_UART_INFO - ldrne \rp, =__phys_to_virt(DAVINCI_UART_INFO) + ldrne \rp, =davinci_uart_p2v(DAVINCI_UART_INFO) ldr \rp, [\rp, #0] str \rp, [\rv] /* Copy uart virt address from decompressor uart info */ - ldreq \rv, =__virt_to_phys(davinci_uart_virt) + ldreq \rv, =davinci_uart_v2p(davinci_uart_virt) ldrne \rv, =davinci_uart_virt ldreq \rp, =DAVINCI_UART_INFO - ldrne \rp, =__phys_to_virt(DAVINCI_UART_INFO) + ldrne \rp, =davinci_uart_p2v(DAVINCI_UART_INFO) ldr \rp, [\rp, #4] str \rp, [\rv] diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h index 78822723f382..491249ef209c 100644 --- a/arch/arm/mach-davinci/include/mach/memory.h +++ b/arch/arm/mach-davinci/include/mach/memory.h @@ -41,27 +41,11 @@ */ #define CONSISTENT_DMA_SIZE (14<<20) -#ifndef __ASSEMBLY__ /* * Restrict DMA-able region to workaround silicon bug. The bug * restricts buffers available for DMA to video hardware to be * below 128M */ -static inline void -__arch_adjust_zones(unsigned long *size, unsigned long *holes) -{ - unsigned int sz = (128<<20) >> PAGE_SHIFT; - - size[1] = size[0] - sz; - size[0] = sz; -} - -#define arch_adjust_zones(zone_size, holes) \ - if ((meminfo.bank[0].size >> 20) > 128) __arch_adjust_zones(zone_size, holes) - -#define ISA_DMA_THRESHOLD (PHYS_OFFSET + (128<<20) - 1) -#define MAX_DMA_ADDRESS (PAGE_OFFSET + (128<<20)) - -#endif +#define ARM_DMA_ZONE_SIZE SZ_128M #endif /* __ASM_ARCH_MEMORY_H */ diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h index 8051110b8ac3..c9e6ce185a66 100644 --- a/arch/arm/mach-davinci/include/mach/serial.h +++ b/arch/arm/mach-davinci/include/mach/serial.h @@ -22,7 +22,7 @@ * * This area sits just below the page tables (see arch/arm/kernel/head.S). */ -#define DAVINCI_UART_INFO (PHYS_OFFSET + 0x3ff8) +#define DAVINCI_UART_INFO (PLAT_PHYS_OFFSET + 0x3ff8) #define DAVINCI_UART0_BASE (IO_PHYS + 0x20000) #define DAVINCI_UART1_BASE (IO_PHYS + 0x20400) |