summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c')
-rw-r--r--arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c283
1 files changed, 0 insertions, 283 deletions
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c
deleted file mode 100644
index 8377d8054168..000000000000
--- a/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c
+++ /dev/null
@@ -1,283 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-* @file chipcHw_init.c
-*
-* @brief Low level CHIPC PLL configuration functions
-*
-* @note
-*
-* These routines provide basic PLL controlling functionality only.
-*/
-/****************************************************************************/
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#include <linux/errno.h>
-#include <linux/types.h>
-#include <linux/export.h>
-
-#include <mach/csp/chipcHw_def.h>
-#include <mach/csp/chipcHw_inline.h>
-
-#include <mach/csp/reg.h>
-#include <linux/delay.h>
-/* ---- Private Constants and Types --------------------------------------- */
-
-/*
- Calculation for NDIV_i to obtain VCO frequency
- -----------------------------------------------
-
- Freq_vco = Freq_ref * (P2 / P1) * (PLL_NDIV_i + PLL_NDIV_f)
- for Freq_vco = VCO_FREQ_MHz
- Freq_ref = chipcHw_XTAL_FREQ_Hz
- PLL_P1 = PLL_P2 = 1
- and
- PLL_NDIV_f = 0
-
- We get:
- PLL_NDIV_i = Freq_vco / Freq_ref = VCO_FREQ_MHz / chipcHw_XTAL_FREQ_Hz
-
- Calculation for PLL MDIV to obtain frequency Freq_x for channel x
- -----------------------------------------------------------------
- Freq_x = chipcHw_XTAL_FREQ_Hz * PLL_NDIV_i / PLL_MDIV_x = VCO_FREQ_MHz / PLL_MDIV_x
-
- PLL_MDIV_x = VCO_FREQ_MHz / Freq_x
-*/
-
-/* ---- Private Variables ------------------------------------------------- */
-/****************************************************************************/
-/**
-* @brief Initializes the PLL2
-*
-* This function initializes the PLL2
-*
-*/
-/****************************************************************************/
-void chipcHw_pll2Enable(uint32_t vcoFreqHz)
-{
- uint32_t pllPreDivider2 = 0;
-
- {
- REG_LOCAL_IRQ_SAVE;
- writel(chipcHw_REG_PLL_CONFIG_D_RESET |
- chipcHw_REG_PLL_CONFIG_A_RESET,
- &pChipcHw->PLLConfig2);
-
- pllPreDivider2 = chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN |
- chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER |
- (chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) <<
- chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
- (chipcHw_REG_PLL_PREDIVIDER_P1 <<
- chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
- (chipcHw_REG_PLL_PREDIVIDER_P2 <<
- chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
-
- /* Enable CHIPC registers to control the PLL */
- writel(readl(&pChipcHw->PLLStatus) | chipcHw_REG_PLL_STATUS_CONTROL_ENABLE, &pChipcHw->PLLStatus);
-
- /* Set pre divider to get desired VCO frequency */
- writel(pllPreDivider2, &pChipcHw->PLLPreDivider2);
- /* Set NDIV Frac */
- writel(chipcHw_REG_PLL_DIVIDER_NDIV_f, &pChipcHw->PLLDivider2);
-
- /* This has to be removed once the default values are fixed for PLL2. */
- writel(0x38000700, &pChipcHw->PLLControl12);
- writel(0x00000015, &pChipcHw->PLLControl22);
-
- /* Reset PLL2 */
- if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) {
- writel(chipcHw_REG_PLL_CONFIG_D_RESET |
- chipcHw_REG_PLL_CONFIG_A_RESET |
- chipcHw_REG_PLL_CONFIG_VCO_1601_3200 |
- chipcHw_REG_PLL_CONFIG_POWER_DOWN,
- &pChipcHw->PLLConfig2);
- } else {
- writel(chipcHw_REG_PLL_CONFIG_D_RESET |
- chipcHw_REG_PLL_CONFIG_A_RESET |
- chipcHw_REG_PLL_CONFIG_VCO_800_1600 |
- chipcHw_REG_PLL_CONFIG_POWER_DOWN,
- &pChipcHw->PLLConfig2);
- }
- REG_LOCAL_IRQ_RESTORE;
- }
-
- /* Insert certain amount of delay before deasserting ARESET. */
- udelay(1);
-
- {
- REG_LOCAL_IRQ_SAVE;
- /* Remove analog reset and Power on the PLL */
- writel(readl(&pChipcHw->PLLConfig2) &
- ~(chipcHw_REG_PLL_CONFIG_A_RESET |
- chipcHw_REG_PLL_CONFIG_POWER_DOWN),
- &pChipcHw->PLLConfig2);
-
- REG_LOCAL_IRQ_RESTORE;
-
- }
-
- /* Wait until PLL is locked */
- while (!(readl(&pChipcHw->PLLStatus2) & chipcHw_REG_PLL_STATUS_LOCKED))
- ;
-
- {
- REG_LOCAL_IRQ_SAVE;
- /* Remove digital reset */
- writel(readl(&pChipcHw->PLLConfig2) &
- ~chipcHw_REG_PLL_CONFIG_D_RESET,
- &pChipcHw->PLLConfig2);
-
- REG_LOCAL_IRQ_RESTORE;
- }
-}
-
-EXPORT_SYMBOL(chipcHw_pll2Enable);
-
-/****************************************************************************/
-/**
-* @brief Initializes the PLL1
-*
-* This function initializes the PLL1
-*
-*/
-/****************************************************************************/
-void chipcHw_pll1Enable(uint32_t vcoFreqHz, chipcHw_SPREAD_SPECTRUM_e ssSupport)
-{
- uint32_t pllPreDivider = 0;
-
- {
- REG_LOCAL_IRQ_SAVE;
-
- writel(chipcHw_REG_PLL_CONFIG_D_RESET |
- chipcHw_REG_PLL_CONFIG_A_RESET,
- &pChipcHw->PLLConfig);
- /* Setting VCO frequency */
- if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) {
- pllPreDivider =
- chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_1_8 |
- ((chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) -
- 1) << chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
- (chipcHw_REG_PLL_PREDIVIDER_P1 <<
- chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
- (chipcHw_REG_PLL_PREDIVIDER_P2 <<
- chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
- } else {
- pllPreDivider = chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN |
- chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER |
- (chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) <<
- chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
- (chipcHw_REG_PLL_PREDIVIDER_P1 <<
- chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
- (chipcHw_REG_PLL_PREDIVIDER_P2 <<
- chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
- }
-
- /* Enable CHIPC registers to control the PLL */
- writel(readl(&pChipcHw->PLLStatus) | chipcHw_REG_PLL_STATUS_CONTROL_ENABLE, &pChipcHw->PLLStatus);
-
- /* Set pre divider to get desired VCO frequency */
- writel(pllPreDivider, &pChipcHw->PLLPreDivider);
- /* Set NDIV Frac */
- if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) {
- writel(chipcHw_REG_PLL_DIVIDER_M1DIV | chipcHw_REG_PLL_DIVIDER_NDIV_f_SS, &pChipcHw->PLLDivider);
- } else {
- writel(chipcHw_REG_PLL_DIVIDER_M1DIV | chipcHw_REG_PLL_DIVIDER_NDIV_f, &pChipcHw->PLLDivider);
- }
-
- /* Reset PLL1 */
- if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) {
- writel(chipcHw_REG_PLL_CONFIG_D_RESET | chipcHw_REG_PLL_CONFIG_A_RESET | chipcHw_REG_PLL_CONFIG_VCO_1601_3200 | chipcHw_REG_PLL_CONFIG_POWER_DOWN, &pChipcHw->PLLConfig);
- } else {
- writel(chipcHw_REG_PLL_CONFIG_D_RESET | chipcHw_REG_PLL_CONFIG_A_RESET | chipcHw_REG_PLL_CONFIG_VCO_800_1600 | chipcHw_REG_PLL_CONFIG_POWER_DOWN, &pChipcHw->PLLConfig);
- }
-
- REG_LOCAL_IRQ_RESTORE;
-
- /* Insert certain amount of delay before deasserting ARESET. */
- udelay(1);
-
- {
- REG_LOCAL_IRQ_SAVE;
- /* Remove analog reset and Power on the PLL */
- writel(readl(&pChipcHw->PLLConfig) & ~(chipcHw_REG_PLL_CONFIG_A_RESET | chipcHw_REG_PLL_CONFIG_POWER_DOWN), &pChipcHw->PLLConfig);
- REG_LOCAL_IRQ_RESTORE;
- }
-
- /* Wait until PLL is locked */
- while (!(readl(&pChipcHw->PLLStatus) & chipcHw_REG_PLL_STATUS_LOCKED)
- || !(readl(&pChipcHw->PLLStatus2) & chipcHw_REG_PLL_STATUS_LOCKED))
- ;
-
- /* Remove digital reset */
- {
- REG_LOCAL_IRQ_SAVE;
- writel(readl(&pChipcHw->PLLConfig) & ~chipcHw_REG_PLL_CONFIG_D_RESET, &pChipcHw->PLLConfig);
- REG_LOCAL_IRQ_RESTORE;
- }
- }
-}
-
-EXPORT_SYMBOL(chipcHw_pll1Enable);
-
-/****************************************************************************/
-/**
-* @brief Initializes the chipc module
-*
-* This function initializes the PLLs and core system clocks
-*
-*/
-/****************************************************************************/
-
-void chipcHw_Init(chipcHw_INIT_PARAM_t *initParam /* [ IN ] Misc chip initialization parameter */
- ) {
-#if !(defined(__KERNEL__) && !defined(STANDALONE))
- delay_init();
-#endif
-
- /* Do not program PLL, when warm reset */
- if (!(chipcHw_getStickyBits() & chipcHw_REG_STICKY_CHIP_WARM_RESET)) {
- chipcHw_pll1Enable(initParam->pllVcoFreqHz,
- initParam->ssSupport);
- chipcHw_pll2Enable(initParam->pll2VcoFreqHz);
- } else {
- /* Clear sticky bits */
- chipcHw_clearStickyBits(chipcHw_REG_STICKY_CHIP_WARM_RESET);
- }
- /* Clear sticky bits */
- chipcHw_clearStickyBits(chipcHw_REG_STICKY_CHIP_SOFT_RESET);
-
- /* Before configuring the ARM clock, atleast we need to make sure BUS clock maintains the proper ratio with ARM clock */
- writel((readl(&pChipcHw->ACLKClock) & ~chipcHw_REG_ACLKClock_CLK_DIV_MASK) | (initParam-> armBusRatio & chipcHw_REG_ACLKClock_CLK_DIV_MASK), &pChipcHw->ACLKClock);
-
- /* Set various core component frequencies. The order in which this is done is important for some. */
- /* The RTBUS (DDR PHY) is derived from the BUS, and the BUS from the ARM, and VPM needs to know BUS */
- /* frequency to find its ratio with the BUS. Hence we must set the ARM first, followed by the BUS, */
- /* then VPM and RTBUS. */
-
- chipcHw_setClockFrequency(chipcHw_CLOCK_ARM,
- initParam->busClockFreqHz *
- initParam->armBusRatio);
- chipcHw_setClockFrequency(chipcHw_CLOCK_BUS, initParam->busClockFreqHz);
- chipcHw_setClockFrequency(chipcHw_CLOCK_VPM,
- initParam->busClockFreqHz *
- initParam->vpmBusRatio);
- chipcHw_setClockFrequency(chipcHw_CLOCK_DDR,
- initParam->busClockFreqHz *
- initParam->ddrBusRatio);
- chipcHw_setClockFrequency(chipcHw_CLOCK_RTBUS,
- initParam->busClockFreqHz / 2);
-}
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-16 17:34:43 +0000