diff options
Diffstat (limited to 'arch/arm/mach-at91/Kconfig.non_dt')
| -rw-r--r-- | arch/arm/mach-at91/Kconfig.non_dt | 399 |
1 files changed, 399 insertions, 0 deletions
diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt new file mode 100644 index 000000000000..6c24985515a2 --- /dev/null +++ b/arch/arm/mach-at91/Kconfig.non_dt @@ -0,0 +1,399 @@ +menu "Atmel Non-DT world" + +config HAVE_AT91_DATAFLASH_CARD + bool + +choice + prompt "Atmel AT91 Processor Devices for non DT boards" + +config ARCH_AT91_NONE + bool "None" + +config ARCH_AT91RM9200 + bool "AT91RM9200" + select SOC_AT91RM9200 + +config ARCH_AT91SAM9260 + bool "AT91SAM9260 or AT91SAM9XE" + select SOC_AT91SAM9260 + +config ARCH_AT91SAM9261 + bool "AT91SAM9261" + select SOC_AT91SAM9261 + +config ARCH_AT91SAM9G10 + bool "AT91SAM9G10" + select SOC_AT91SAM9261 + +config ARCH_AT91SAM9263 + bool "AT91SAM9263" + select SOC_AT91SAM9263 + +config ARCH_AT91SAM9RL + bool "AT91SAM9RL" + select SOC_AT91SAM9RL + +config ARCH_AT91SAM9G20 + bool "AT91SAM9G20" + select SOC_AT91SAM9260 + +config ARCH_AT91SAM9G45 + bool "AT91SAM9G45" + select SOC_AT91SAM9G45 + +config ARCH_AT91X40 + bool "AT91x40" + depends on !MMU + select ARCH_USES_GETTIMEOFFSET + select MULTI_IRQ_HANDLER + select SPARSE_IRQ + +endchoice + +# ---------------------------------------------------------- + +if ARCH_AT91RM9200 + +comment "AT91RM9200 Board Type" + +config MACH_ONEARM + bool "Ajeco 1ARM Single Board Computer" + help + Select this if you are using Ajeco's 1ARM Single Board Computer. + <http://www.ajeco.fi/> + +config ARCH_AT91RM9200DK + bool "Atmel AT91RM9200-DK Development board" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Atmel's AT91RM9200-DK Development board. + (Discontinued) + +config MACH_AT91RM9200EK + bool "Atmel AT91RM9200-EK Evaluation Kit" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit. + <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507> + +config MACH_CSB337 + bool "Cogent CSB337" + help + Select this if you are using Cogent's CSB337 board. + <http://www.cogcomp.com/csb_csb337.htm> + +config MACH_CSB637 + bool "Cogent CSB637" + help + Select this if you are using Cogent's CSB637 board. + <http://www.cogcomp.com/csb_csb637.htm> + +config MACH_CARMEVA + bool "Conitec ARM&EVA" + help + Select this if you are using Conitec's AT91RM9200-MCU-Module. + <http://www.conitec.net/english/linuxboard.php> + +config MACH_ATEB9200 + bool "Embest ATEB9200" + help + Select this if you are using Embest's ATEB9200 board. + <http://www.embedinfo.com/english/product/ATEB9200.asp> + +config MACH_KB9200 + bool "KwikByte KB920x" + help + Select this if you are using KwikByte's KB920x board. + <http://www.kwikbyte.com/KB9202.html> + +config MACH_PICOTUX2XX + bool "picotux 200" + help + Select this if you are using a picotux 200. + <http://www.picotux.com/> + +config MACH_KAFA + bool "Sperry-Sun KAFA board" + help + Select this if you are using Sperry-Sun's KAFA board. + +config MACH_ECBAT91 + bool "emQbit ECB_AT91 SBC" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using emQbit's ECB_AT91 board. + <http://wiki.emqbit.com/free-ecb-at91> + +config MACH_YL9200 + bool "ucDragon YL-9200" + help + Select this if you are using the ucDragon YL-9200 board. + +config MACH_CPUAT91 + bool "Eukrea CPUAT91" + help + Select this if you are using the Eukrea Electromatique's + CPUAT91 board <http://www.eukrea.com/>. + +config MACH_ECO920 + bool "eco920" + help + Select this if you are using the eco920 board + +config MACH_RSI_EWS + bool "RSI Embedded Webserver" + depends on ARCH_AT91RM9200 + help + Select this if you are using RSIs EWS board. +endif + +# ---------------------------------------------------------- + +if ARCH_AT91SAM9260 + +comment "AT91SAM9260 Variants" + +comment "AT91SAM9260 / AT91SAM9XE Board Type" + +config MACH_AT91SAM9260EK + bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit + <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933> + +config MACH_CAM60 + bool "KwikByte KB9260 (CAM60) board" + help + Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260. + <http://www.kwikbyte.com/KB9260.html> + +config MACH_SAM9_L9260 + bool "Olimex SAM9-L9260 board" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260. + <http://www.olimex.com/dev/sam9-L9260.html> + +config MACH_AFEB9260 + bool "Custom afeb9260 board v1" + help + Select this if you are using custom afeb9260 board based on + open hardware design. Select this for revision 1 of the board. + <svn://194.85.238.22/home/users/george/svn/arm9eb> + <http://groups.google.com/group/arm9fpga-evolution-board> + +config MACH_USB_A9260 + bool "CALAO USB-A9260" + help + Select this if you are using a Calao Systems USB-A9260. + <http://www.calao-systems.com> + +config MACH_QIL_A9260 + bool "CALAO QIL-A9260 board" + help + Select this if you are using a Calao Systems QIL-A9260 Board. + <http://www.calao-systems.com> + +config MACH_CPU9260 + bool "Eukrea CPU9260 board" + help + Select this if you are using a Eukrea Electromatique's + CPU9260 Board <http://www.eukrea.com/> + +config MACH_FLEXIBITY + bool "Flexibity Connect board" + help + Select this if you are using Flexibity Connect board + <http://www.flexibity.com> + +endif + +# ---------------------------------------------------------- + +if ARCH_AT91SAM9261 + +comment "AT91SAM9261 Board Type" + +config MACH_AT91SAM9261EK + bool "Atmel AT91SAM9261-EK Evaluation Kit" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit. + <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820> + +endif + +# ---------------------------------------------------------- + +if ARCH_AT91SAM9G10 + +comment "AT91SAM9G10 Board Type" + +config MACH_AT91SAM9G10EK + bool "Atmel AT91SAM9G10-EK Evaluation Kit" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit. + <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588> + +endif + +# ---------------------------------------------------------- + +if ARCH_AT91SAM9263 + +comment "AT91SAM9263 Board Type" + +config MACH_AT91SAM9263EK + bool "Atmel AT91SAM9263-EK Evaluation Kit" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit. + <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057> + +config MACH_USB_A9263 + bool "CALAO USB-A9263" + help + Select this if you are using a Calao Systems USB-A9263. + <http://www.calao-systems.com> + +endif + +# ---------------------------------------------------------- + +if ARCH_AT91SAM9RL + +comment "AT91SAM9RL Board Type" + +config MACH_AT91SAM9RLEK + bool "Atmel AT91SAM9RL-EK Evaluation Kit" + help + Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit. + +endif + +# ---------------------------------------------------------- + +if ARCH_AT91SAM9G20 + +comment "AT91SAM9G20 Board Type" + +config MACH_AT91SAM9G20EK + bool "Atmel AT91SAM9G20-EK Evaluation Kit" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit + that embeds only one SD/MMC slot. + +config MACH_AT91SAM9G20EK_2MMC + depends on MACH_AT91SAM9G20EK + bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots" + help + Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit + with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and + onwards. + <http://www.atmel.com/tools/SAM9G20-EK.aspx> + +config MACH_CPU9G20 + bool "Eukrea CPU9G20 board" + help + Select this if you are using a Eukrea Electromatique's + CPU9G20 Board <http://www.eukrea.com/> + +config MACH_ACMENETUSFOXG20 + bool "Acme Systems srl FOX Board G20" + help + Select this if you are using Acme Systems + FOX Board G20 <http://www.acmesystems.it> + +config MACH_PORTUXG20 + bool "taskit PortuxG20" + help + Select this if you are using taskit's PortuxG20. + <http://www.taskit.de/en/> + +config MACH_STAMP9G20 + bool "taskit Stamp9G20 CPU module" + help + Select this if you are using taskit's Stamp9G20 CPU module on its + evaluation board. + <http://www.taskit.de/en/> + +config MACH_PCONTROL_G20 + bool "PControl G20 CPU module" + help + Select this if you are using taskit's Stamp9G20 CPU module on this + carrier board, beeing the decentralized unit of a building automation + system; featuring nvram, eth-switch, iso-rs485, display, io + +config MACH_GSIA18S + bool "GS_IA18_S board" + help + This enables support for the GS_IA18_S board + produced by GeoSIG Ltd company. This is an internet accelerograph. + <http://www.geosig.com> + +config MACH_USB_A9G20 + bool "CALAO USB-A9G20" + depends on ARCH_AT91SAM9G20 + help + Select this if you are using a Calao Systems USB-A9G20. + <http://www.calao-systems.com> + +endif + +if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20) +comment "AT91SAM9260/AT91SAM9G20 boards" + +config MACH_SNAPPER_9260 + bool "Bluewater Systems Snapper 9260/9G20 module" + help + Select this if you are using the Bluewater Systems Snapper 9260 or + Snapper 9G20 modules. + <http://www.bluewatersys.com/> +endif + +# ---------------------------------------------------------- + +if ARCH_AT91SAM9G45 + +comment "AT91SAM9G45 Board Type" + +config MACH_AT91SAM9M10G45EK + bool "Atmel AT91SAM9M10G45-EK Evaluation Kits" + help + Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit. + Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10 + families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11. + <http://www.atmel.com/tools/SAM9M10-G45-EK.aspx> + +endif + +# ---------------------------------------------------------- + +if ARCH_AT91X40 + +comment "AT91X40 Board Type" + +config MACH_AT91EB01 + bool "Atmel AT91EB01 Evaluation Kit" + help + Select this if you are using Atmel's AT91EB01 Evaluation Kit. + It is also a popular target for simulators such as GDB's + ARM simulator (commonly known as the ARMulator) and the + Skyeye simulator. + +endif + +# ---------------------------------------------------------- + +comment "AT91 Board Options" + +config MTD_AT91_DATAFLASH_CARD + bool "Enable DataFlash Card support" + depends on HAVE_AT91_DATAFLASH_CARD + help + Enable support for the DataFlash card. + +endmenu |