diff options
Diffstat (limited to 'arch/arm/kernel/head.S')
| -rw-r--r-- | arch/arm/kernel/head.S | 323 |
1 files changed, 208 insertions, 115 deletions
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index eb62bf947212..dd6b369ac69c 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -22,6 +22,10 @@ #include <asm/thread_info.h> #include <asm/system.h> +#ifdef CONFIG_DEBUG_LL +#include <mach/debug-macro.S> +#endif + #if (PHYS_OFFSET & 0x001fffff) #error "PHYS_OFFSET must be at an even 2MiB boundary!" #endif @@ -86,6 +90,9 @@ ENTRY(stext) movs r8, r5 @ invalid machine (r5=0)? beq __error_a @ yes, error 'a' bl __vet_atags +#ifdef CONFIG_SMP_ON_UP + bl __fixup_smp +#endif bl __create_page_tables /* @@ -95,113 +102,15 @@ ENTRY(stext) * above. On return, the CPU will be ready for the MMU to be * turned on, and r0 will hold the CPU control register value. */ - ldr r13, __switch_data @ address to jump to after + ldr r13, =__mmap_switched @ address to jump to after @ mmu has been enabled - adr lr, BSYM(__enable_mmu) @ return (PIC) address + adr lr, BSYM(1f) @ return (PIC) address ARM( add pc, r10, #PROCINFO_INITFUNC ) THUMB( add r12, r10, #PROCINFO_INITFUNC ) THUMB( mov pc, r12 ) +1: b __enable_mmu ENDPROC(stext) - -#if defined(CONFIG_SMP) -ENTRY(secondary_startup) - /* - * Common entry point for secondary CPUs. - * - * Ensure that we're in SVC mode, and IRQs are disabled. Lookup - * the processor type - there is no need to check the machine type - * as it has already been validated by the primary processor. - */ - setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 - mrc p15, 0, r9, c0, c0 @ get processor id - bl __lookup_processor_type - movs r10, r5 @ invalid processor? - moveq r0, #'p' @ yes, error 'p' - beq __error - - /* - * Use the page tables supplied from __cpu_up. - */ - adr r4, __secondary_data - ldmia r4, {r5, r7, r12} @ address to jump to after - sub r4, r4, r5 @ mmu has been enabled - ldr r4, [r7, r4] @ get secondary_data.pgdir - adr lr, BSYM(__enable_mmu) @ return address - mov r13, r12 @ __secondary_switched address - ARM( add pc, r10, #PROCINFO_INITFUNC ) @ initialise processor - @ (return control reg) - THUMB( add r12, r10, #PROCINFO_INITFUNC ) - THUMB( mov pc, r12 ) -ENDPROC(secondary_startup) - - /* - * r6 = &secondary_data - */ -ENTRY(__secondary_switched) - ldr sp, [r7, #4] @ get secondary_data.stack - mov fp, #0 - b secondary_start_kernel -ENDPROC(__secondary_switched) - - .type __secondary_data, %object -__secondary_data: - .long . - .long secondary_data - .long __secondary_switched -#endif /* defined(CONFIG_SMP) */ - - - -/* - * Setup common bits before finally enabling the MMU. Essentially - * this is just loading the page table pointer and domain access - * registers. - */ -__enable_mmu: -#ifdef CONFIG_ALIGNMENT_TRAP - orr r0, r0, #CR_A -#else - bic r0, r0, #CR_A -#endif -#ifdef CONFIG_CPU_DCACHE_DISABLE - bic r0, r0, #CR_C -#endif -#ifdef CONFIG_CPU_BPREDICT_DISABLE - bic r0, r0, #CR_Z -#endif -#ifdef CONFIG_CPU_ICACHE_DISABLE - bic r0, r0, #CR_I -#endif - mov r5, #(domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \ - domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \ - domain_val(DOMAIN_TABLE, DOMAIN_MANAGER) | \ - domain_val(DOMAIN_IO, DOMAIN_CLIENT)) - mcr p15, 0, r5, c3, c0, 0 @ load domain access register - mcr p15, 0, r4, c2, c0, 0 @ load page table pointer - b __turn_mmu_on -ENDPROC(__enable_mmu) - -/* - * Enable the MMU. This completely changes the structure of the visible - * memory space. You will not be able to trace execution through this. - * If you have an enquiry about this, *please* check the linux-arm-kernel - * mailing list archives BEFORE sending another post to the list. - * - * r0 = cp#15 control register - * r13 = *virtual* address to jump to upon completion - * - * other registers depend on the function called upon completion - */ - .align 5 -__turn_mmu_on: - mov r0, r0 - mcr p15, 0, r0, c1, c0, 0 @ write control reg - mrc p15, 0, r3, c0, c0, 0 @ read id reg - mov r3, r3 - mov r3, r13 - mov pc, r3 -ENDPROC(__turn_mmu_on) - + .ltorg /* * Setup the initial page tables. We only setup the barest @@ -213,7 +122,7 @@ ENDPROC(__turn_mmu_on) * r10 = procinfo * * Returns: - * r0, r3, r6, r7 corrupted + * r0, r3, r5-r7 corrupted * r4 = physical page table address */ __create_page_tables: @@ -235,20 +144,30 @@ __create_page_tables: ldr r7, [r10, #PROCINFO_MM_MMUFLAGS] @ mm_mmuflags /* - * Create identity mapping for first MB of kernel to - * cater for the MMU enable. This identity mapping - * will be removed by paging_init(). We use our current program - * counter to determine corresponding section base address. + * Create identity mapping to cater for __enable_mmu. + * This identity mapping will be removed by paging_init(). */ - mov r6, pc - mov r6, r6, lsr #20 @ start of kernel section - orr r3, r7, r6, lsl #20 @ flags + kernel base - str r3, [r4, r6, lsl #2] @ identity mapping + adr r0, __enable_mmu_loc + ldmia r0, {r3, r5, r6} + sub r0, r0, r3 @ virt->phys offset + add r5, r5, r0 @ phys __enable_mmu + add r6, r6, r0 @ phys __enable_mmu_end + mov r5, r5, lsr #20 + mov r6, r6, lsr #20 + +1: orr r3, r7, r5, lsl #20 @ flags + kernel base + str r3, [r4, r5, lsl #2] @ identity mapping + teq r5, r6 + addne r5, r5, #1 @ next section + bne 1b /* * Now setup the pagetables for our kernel direct * mapped region. */ + mov r3, pc + mov r3, r3, lsr #20 + orr r3, r7, r3, lsl #20 add r0, r4, #(KERNEL_START & 0xff000000) >> 18 str r3, [r0, #(KERNEL_START & 0x00f00000) >> 18]! ldr r6, =(KERNEL_END - 1) @@ -289,24 +208,35 @@ __create_page_tables: str r6, [r0] #ifdef CONFIG_DEBUG_LL - ldr r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags +#ifndef CONFIG_DEBUG_ICEDCC /* * Map in IO space for serial debugging. * This allows debug messages to be output * via a serial console before paging_init. */ - ldr r3, [r8, #MACHINFO_PGOFFIO] + addruart r7, r3 + + mov r3, r3, lsr #20 + mov r3, r3, lsl #2 + add r0, r4, r3 rsb r3, r3, #0x4000 @ PTRS_PER_PGD*sizeof(long) cmp r3, #0x0800 @ limit to 512MB movhi r3, #0x0800 add r6, r0, r3 - ldr r3, [r8, #MACHINFO_PHYSIO] - orr r3, r3, r7 + mov r3, r7, lsr #20 + ldr r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags + orr r3, r7, r3, lsl #20 1: str r3, [r0], #4 add r3, r3, #1 << 20 teq r0, r6 bne 1b + +#else /* CONFIG_DEBUG_ICEDCC */ + /* we don't need any serial debugging mappings for ICEDCC */ + ldr r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags +#endif /* !CONFIG_DEBUG_ICEDCC */ + #if defined(CONFIG_ARCH_NETWINDER) || defined(CONFIG_ARCH_CATS) /* * If we're using the NetWinder or CATS, we also need to map @@ -332,5 +262,168 @@ __create_page_tables: mov pc, lr ENDPROC(__create_page_tables) .ltorg +__enable_mmu_loc: + .long . + .long __enable_mmu + .long __enable_mmu_end + +#if defined(CONFIG_SMP) + __CPUINIT +ENTRY(secondary_startup) + /* + * Common entry point for secondary CPUs. + * + * Ensure that we're in SVC mode, and IRQs are disabled. Lookup + * the processor type - there is no need to check the machine type + * as it has already been validated by the primary processor. + */ + setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 + mrc p15, 0, r9, c0, c0 @ get processor id + bl __lookup_processor_type + movs r10, r5 @ invalid processor? + moveq r0, #'p' @ yes, error 'p' + beq __error_p + + /* + * Use the page tables supplied from __cpu_up. + */ + adr r4, __secondary_data + ldmia r4, {r5, r7, r12} @ address to jump to after + sub r4, r4, r5 @ mmu has been enabled + ldr r4, [r7, r4] @ get secondary_data.pgdir + adr lr, BSYM(__enable_mmu) @ return address + mov r13, r12 @ __secondary_switched address + ARM( add pc, r10, #PROCINFO_INITFUNC ) @ initialise processor + @ (return control reg) + THUMB( add r12, r10, #PROCINFO_INITFUNC ) + THUMB( mov pc, r12 ) +ENDPROC(secondary_startup) + + /* + * r6 = &secondary_data + */ +ENTRY(__secondary_switched) + ldr sp, [r7, #4] @ get secondary_data.stack + mov fp, #0 + b secondary_start_kernel +ENDPROC(__secondary_switched) + + .type __secondary_data, %object +__secondary_data: + .long . + .long secondary_data + .long __secondary_switched +#endif /* defined(CONFIG_SMP) */ + + + +/* + * Setup common bits before finally enabling the MMU. Essentially + * this is just loading the page table pointer and domain access + * registers. + * + * r0 = cp#15 control register + * r1 = machine ID + * r2 = atags pointer + * r4 = page table pointer + * r9 = processor ID + * r13 = *virtual* address to jump to upon completion + */ +__enable_mmu: +#ifdef CONFIG_ALIGNMENT_TRAP + orr r0, r0, #CR_A +#else + bic r0, r0, #CR_A +#endif +#ifdef CONFIG_CPU_DCACHE_DISABLE + bic r0, r0, #CR_C +#endif +#ifdef CONFIG_CPU_BPREDICT_DISABLE + bic r0, r0, #CR_Z +#endif +#ifdef CONFIG_CPU_ICACHE_DISABLE + bic r0, r0, #CR_I +#endif + mov r5, #(domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \ + domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \ + domain_val(DOMAIN_TABLE, DOMAIN_MANAGER) | \ + domain_val(DOMAIN_IO, DOMAIN_CLIENT)) + mcr p15, 0, r5, c3, c0, 0 @ load domain access register + mcr p15, 0, r4, c2, c0, 0 @ load page table pointer + b __turn_mmu_on +ENDPROC(__enable_mmu) + +/* + * Enable the MMU. This completely changes the structure of the visible + * memory space. You will not be able to trace execution through this. + * If you have an enquiry about this, *please* check the linux-arm-kernel + * mailing list archives BEFORE sending another post to the list. + * + * r0 = cp#15 control register + * r1 = machine ID + * r2 = atags pointer + * r9 = processor ID + * r13 = *virtual* address to jump to upon completion + * + * other registers depend on the function called upon completion + */ + .align 5 +__turn_mmu_on: + mov r0, r0 + mcr p15, 0, r0, c1, c0, 0 @ write control reg + mrc p15, 0, r3, c0, c0, 0 @ read id reg + mov r3, r3 + mov r3, r13 + mov pc, r3 +__enable_mmu_end: +ENDPROC(__turn_mmu_on) + + +#ifdef CONFIG_SMP_ON_UP +__fixup_smp: + mov r7, #0x00070000 + orr r6, r7, #0xff000000 @ mask 0xff070000 + orr r7, r7, #0x41000000 @ val 0x41070000 + and r0, r9, r6 + teq r0, r7 @ ARM CPU and ARMv6/v7? + bne __fixup_smp_on_up @ no, assume UP + + orr r6, r6, #0x0000ff00 + orr r6, r6, #0x000000f0 @ mask 0xff07fff0 + orr r7, r7, #0x0000b000 + orr r7, r7, #0x00000020 @ val 0x4107b020 + and r0, r9, r6 + teq r0, r7 @ ARM 11MPCore? + moveq pc, lr @ yes, assume SMP + + mrc p15, 0, r0, c0, c0, 5 @ read MPIDR + tst r0, #1 << 31 + movne pc, lr @ bit 31 => SMP + +__fixup_smp_on_up: + adr r0, 1f + ldmia r0, {r3, r6, r7} + sub r3, r0, r3 + add r6, r6, r3 + add r7, r7, r3 +2: cmp r6, r7 + ldmia r6!, {r0, r4} + strlo r4, [r0, r3] + blo 2b + mov pc, lr +ENDPROC(__fixup_smp) + +1: .word . + .word __smpalt_begin + .word __smpalt_end + + .pushsection .data + .globl smp_on_up +smp_on_up: + ALT_SMP(.long 1) + ALT_UP(.long 0) + .popsection + +#endif #include "head-common.S" |