diff options
Diffstat (limited to 'arch/arm/common')
| -rw-r--r-- | arch/arm/common/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/common/pl330.c | 4 | ||||
| -rw-r--r-- | arch/arm/common/sa1111.c | 8 | ||||
| -rw-r--r-- | arch/arm/common/timer-sp.c | 82 | ||||
| -rw-r--r-- | arch/arm/common/vic.c | 69 |
5 files changed, 78 insertions, 86 deletions
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index e7521bca2c35..6ea9b6f3607a 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -16,5 +16,4 @@ obj-$(CONFIG_SHARP_SCOOP) += scoop.o obj-$(CONFIG_ARCH_IXP2000) += uengine.o obj-$(CONFIG_ARCH_IXP23XX) += uengine.o obj-$(CONFIG_PCI_HOST_ITE8152) += it8152.o -obj-$(CONFIG_COMMON_CLKDEV) += clkdev.o obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp.o diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c index 8f0f86db3602..97912fa48782 100644 --- a/arch/arm/common/pl330.c +++ b/arch/arm/common/pl330.c @@ -1045,7 +1045,7 @@ static inline int _loop(unsigned dry_run, u8 buf[], unsigned lcnt0, lcnt1, ljmp0, ljmp1; struct _arg_LPEND lpend; - /* Max iterations possibile in DMALP is 256 */ + /* Max iterations possible in DMALP is 256 */ if (*bursts >= 256*256) { lcnt1 = 256; lcnt0 = 256; @@ -1446,7 +1446,7 @@ int pl330_update(const struct pl330_info *pi) } for (ev = 0; ev < pi->pcfg.num_events; ev++) { - if (val & (1 << ev)) { /* Event occured */ + if (val & (1 << ev)) { /* Event occurred */ struct pl330_thread *thrd; u32 inten = readl(regs + INTEN); int active; diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index a12b33c0dc42..9c49a46a2b7a 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -185,14 +185,6 @@ static struct sa1111_dev_info sa1111_devices[] = { }, }; -void __init sa1111_adjust_zones(unsigned long *size, unsigned long *holes) -{ - unsigned int sz = SZ_1M >> PAGE_SHIFT; - - size[1] = size[0] - sz; - size[0] = sz; -} - /* * SA1111 interrupt support. Since clearing an IRQ while there are * active IRQs causes the interrupt output to pulse, the upper levels diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c index 6ef3342153b9..41df47875122 100644 --- a/arch/arm/common/timer-sp.c +++ b/arch/arm/common/timer-sp.c @@ -18,53 +18,67 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include <linux/clk.h> #include <linux/clocksource.h> #include <linux/clockchips.h> +#include <linux/err.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/io.h> #include <asm/hardware/arm_timer.h> -/* - * These timers are currently always setup to be clocked at 1MHz. - */ -#define TIMER_FREQ_KHZ (1000) -#define TIMER_RELOAD (TIMER_FREQ_KHZ * 1000 / HZ) +static long __init sp804_get_clock_rate(const char *name) +{ + struct clk *clk; + long rate; + int err; + + clk = clk_get_sys("sp804", name); + if (IS_ERR(clk)) { + pr_err("sp804: %s clock not found: %d\n", name, + (int)PTR_ERR(clk)); + return PTR_ERR(clk); + } -static void __iomem *clksrc_base; + err = clk_enable(clk); + if (err) { + pr_err("sp804: %s clock failed to enable: %d\n", name, err); + clk_put(clk); + return err; + } -static cycle_t sp804_read(struct clocksource *cs) -{ - return ~readl(clksrc_base + TIMER_VALUE); -} + rate = clk_get_rate(clk); + if (rate < 0) { + pr_err("sp804: %s clock failed to get rate: %ld\n", name, rate); + clk_disable(clk); + clk_put(clk); + } -static struct clocksource clocksource_sp804 = { - .name = "timer3", - .rating = 200, - .read = sp804_read, - .mask = CLOCKSOURCE_MASK(32), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; + return rate; +} -void __init sp804_clocksource_init(void __iomem *base) +void __init sp804_clocksource_init(void __iomem *base, const char *name) { - struct clocksource *cs = &clocksource_sp804; + long rate = sp804_get_clock_rate(name); - clksrc_base = base; + if (rate < 0) + return; /* setup timer 0 as free-running clocksource */ - writel(0, clksrc_base + TIMER_CTRL); - writel(0xffffffff, clksrc_base + TIMER_LOAD); - writel(0xffffffff, clksrc_base + TIMER_VALUE); + writel(0, base + TIMER_CTRL); + writel(0xffffffff, base + TIMER_LOAD); + writel(0xffffffff, base + TIMER_VALUE); writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC, - clksrc_base + TIMER_CTRL); + base + TIMER_CTRL); - clocksource_register_khz(cs, TIMER_FREQ_KHZ); + clocksource_mmio_init(base + TIMER_VALUE, name, + rate, 200, 32, clocksource_mmio_readl_down); } static void __iomem *clkevt_base; +static unsigned long clkevt_reload; /* * IRQ handler for the timer @@ -90,7 +104,7 @@ static void sp804_set_mode(enum clock_event_mode mode, switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - writel(TIMER_RELOAD, clkevt_base + TIMER_LOAD); + writel(clkevt_reload, clkevt_base + TIMER_LOAD); ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE; break; @@ -120,7 +134,6 @@ static int sp804_set_next_event(unsigned long next, } static struct clock_event_device sp804_clockevent = { - .name = "timer0", .shift = 32, .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .set_mode = sp804_set_mode, @@ -136,17 +149,24 @@ static struct irqaction sp804_timer_irq = { .dev_id = &sp804_clockevent, }; -void __init sp804_clockevents_init(void __iomem *base, unsigned int timer_irq) +void __init sp804_clockevents_init(void __iomem *base, unsigned int irq, + const char *name) { struct clock_event_device *evt = &sp804_clockevent; + long rate = sp804_get_clock_rate(name); + + if (rate < 0) + return; clkevt_base = base; + clkevt_reload = DIV_ROUND_CLOSEST(rate, HZ); - evt->irq = timer_irq; - evt->mult = div_sc(TIMER_FREQ_KHZ, NSEC_PER_MSEC, evt->shift); + evt->name = name; + evt->irq = irq; + evt->mult = div_sc(rate, NSEC_PER_SEC, evt->shift); evt->max_delta_ns = clockevent_delta2ns(0xffffffff, evt); evt->min_delta_ns = clockevent_delta2ns(0xf, evt); - setup_irq(timer_irq, &sp804_timer_irq); + setup_irq(irq, &sp804_timer_irq); clockevents_register_device(evt); } diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index 113085a77123..7aa4262ada7a 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c @@ -22,17 +22,16 @@ #include <linux/init.h> #include <linux/list.h> #include <linux/io.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/device.h> #include <linux/amba/bus.h> #include <asm/mach/irq.h> #include <asm/hardware/vic.h> -#if defined(CONFIG_PM) +#ifdef CONFIG_PM /** * struct vic_device - VIC PM device - * @sysdev: The system device which is registered. * @irq: The IRQ number for the base of the VIC. * @base: The register base for the VIC. * @resume_sources: A bitmask of interrupts for resume. @@ -43,8 +42,6 @@ * @protect: Save for VIC_PROTECT. */ struct vic_device { - struct sys_device sysdev; - void __iomem *base; int irq; u32 resume_sources; @@ -59,11 +56,6 @@ struct vic_device { static struct vic_device vic_devices[CONFIG_ARM_VIC_NR]; static int vic_id; - -static inline struct vic_device *to_vic(struct sys_device *sys) -{ - return container_of(sys, struct vic_device, sysdev); -} #endif /* CONFIG_PM */ /** @@ -85,10 +77,9 @@ static void vic_init2(void __iomem *base) writel(32, base + VIC_PL190_DEF_VECT_ADDR); } -#if defined(CONFIG_PM) -static int vic_class_resume(struct sys_device *dev) +#ifdef CONFIG_PM +static void resume_one_vic(struct vic_device *vic) { - struct vic_device *vic = to_vic(dev); void __iomem *base = vic->base; printk(KERN_DEBUG "%s: resuming vic at %p\n", __func__, base); @@ -107,13 +98,18 @@ static int vic_class_resume(struct sys_device *dev) writel(vic->soft_int, base + VIC_INT_SOFT); writel(~vic->soft_int, base + VIC_INT_SOFT_CLEAR); +} - return 0; +static void vic_resume(void) +{ + int id; + + for (id = vic_id - 1; id >= 0; id--) + resume_one_vic(vic_devices + id); } -static int vic_class_suspend(struct sys_device *dev, pm_message_t state) +static void suspend_one_vic(struct vic_device *vic) { - struct vic_device *vic = to_vic(dev); void __iomem *base = vic->base; printk(KERN_DEBUG "%s: suspending vic at %p\n", __func__, base); @@ -128,14 +124,21 @@ static int vic_class_suspend(struct sys_device *dev, pm_message_t state) writel(vic->resume_irqs, base + VIC_INT_ENABLE); writel(~vic->resume_irqs, base + VIC_INT_ENABLE_CLEAR); +} + +static int vic_suspend(void) +{ + int id; + + for (id = 0; id < vic_id; id++) + suspend_one_vic(vic_devices + id); return 0; } -struct sysdev_class vic_class = { - .name = "vic", - .suspend = vic_class_suspend, - .resume = vic_class_resume, +struct syscore_ops vic_syscore_ops = { + .suspend = vic_suspend, + .resume = vic_resume, }; /** @@ -147,30 +150,8 @@ struct sysdev_class vic_class = { */ static int __init vic_pm_init(void) { - struct vic_device *dev = vic_devices; - int err; - int id; - - if (vic_id == 0) - return 0; - - err = sysdev_class_register(&vic_class); - if (err) { - printk(KERN_ERR "%s: cannot register class\n", __func__); - return err; - } - - for (id = 0; id < vic_id; id++, dev++) { - dev->sysdev.id = id; - dev->sysdev.cls = &vic_class; - - err = sysdev_register(&dev->sysdev); - if (err) { - printk(KERN_ERR "%s: failed to register device\n", - __func__); - return err; - } - } + if (vic_id > 0) + register_syscore_ops(&vic_syscore_ops); return 0; } |