summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot')
-rw-r--r--arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts2
-rw-r--r--arch/arm/boot/dts/imx6dl-yapp4-common.dtsi6
-rw-r--r--arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi4
-rw-r--r--arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi1
-rw-r--r--arch/arm/boot/dts/imx6ull-pinfunc-snvs.h2
-rw-r--r--arch/arm/boot/dts/rk3288-tinker.dtsi3
-rw-r--r--arch/arm/boot/dts/rk3288-veyron.dtsi2
-rw-r--r--arch/arm/boot/dts/rk3288.dtsi20
-rw-r--r--arch/arm/boot/dts/ste-nomadik-nhk15.dts9
9 files changed, 24 insertions, 25 deletions
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
index 5641d162dfdb..28e7513ce617 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
@@ -93,7 +93,7 @@
};
&hdmi {
- hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+ hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
};
&pwm {
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
index b715ab0fa1ff..e8d800fec637 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -114,9 +114,9 @@
reg = <2>;
};
- switch@0 {
+ switch@10 {
compatible = "qca,qca8334";
- reg = <0>;
+ reg = <10>;
switch_ports: ports {
#address-cells = <1>;
@@ -125,7 +125,7 @@
ethphy0: port@0 {
reg = <0>;
label = "cpu";
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
ethernet = <&fec>;
fixed-link {
diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
index 1d1b4bd0670f..a4217f564a53 100644
--- a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
@@ -264,7 +264,7 @@
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
vmcc-supply = <&reg_sd3_vmmc>;
cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
- bus-witdh = <4>;
+ bus-width = <4>;
no-1-8-v;
status = "okay";
};
@@ -275,7 +275,7 @@
pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
vmcc-supply = <&reg_sd4_vmmc>;
- bus-witdh = <8>;
+ bus-width = <8>;
no-1-8-v;
non-removable;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index 433bf09a1954..027df06c5dc7 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -91,6 +91,7 @@
pinctrl-0 = <&pinctrl_enet>;
phy-handle = <&ethphy>;
phy-mode = "rgmii";
+ phy-reset-duration = <10>; /* in msecs */
phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
phy-supply = <&vdd_eth_io_reg>;
status = "disabled";
diff --git a/arch/arm/boot/dts/imx6ull-pinfunc-snvs.h b/arch/arm/boot/dts/imx6ull-pinfunc-snvs.h
index f6fb6783c193..54cfe72295aa 100644
--- a/arch/arm/boot/dts/imx6ull-pinfunc-snvs.h
+++ b/arch/arm/boot/dts/imx6ull-pinfunc-snvs.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2016 Freescale Semiconductor, Inc.
* Copyright (C) 2017 NXP
diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
index aa107ee41b8b..ef653c3209bc 100644
--- a/arch/arm/boot/dts/rk3288-tinker.dtsi
+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
@@ -254,6 +254,7 @@
};
vccio_sd: LDO_REG5 {
+ regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vccio_sd";
@@ -430,7 +431,7 @@
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
- card-detect-delay = <200>;
+ broken-cd;
disable-wp; /* wp not hooked up */
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index 0bc2409f6903..192dbc089ade 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -25,8 +25,6 @@
gpio_keys: gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pwr_key_l>;
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index ca7d52daa8fb..a024d1e7e74c 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -70,7 +70,7 @@
compatible = "arm,cortex-a12";
reg = <0x501>;
resets = <&cru SRST_CORE1>;
- operating-points = <&cpu_opp_table>;
+ operating-points-v2 = <&cpu_opp_table>;
#cooling-cells = <2>; /* min followed by max */
clock-latency = <40000>;
clocks = <&cru ARMCLK>;
@@ -80,7 +80,7 @@
compatible = "arm,cortex-a12";
reg = <0x502>;
resets = <&cru SRST_CORE2>;
- operating-points = <&cpu_opp_table>;
+ operating-points-v2 = <&cpu_opp_table>;
#cooling-cells = <2>; /* min followed by max */
clock-latency = <40000>;
clocks = <&cru ARMCLK>;
@@ -90,7 +90,7 @@
compatible = "arm,cortex-a12";
reg = <0x503>;
resets = <&cru SRST_CORE3>;
- operating-points = <&cpu_opp_table>;
+ operating-points-v2 = <&cpu_opp_table>;
#cooling-cells = <2>; /* min followed by max */
clock-latency = <40000>;
clocks = <&cru ARMCLK>;
@@ -1119,8 +1119,6 @@
clock-names = "ref", "pclk";
power-domains = <&power RK3288_PD_VIO>;
rockchip,grf = <&grf>;
- #address-cells = <1>;
- #size-cells = <0>;
status = "disabled";
ports {
@@ -1282,27 +1280,27 @@
gpu_opp_table: gpu-opp-table {
compatible = "operating-points-v2";
- opp@100000000 {
+ opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <950000>;
};
- opp@200000000 {
+ opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
opp-microvolt = <950000>;
};
- opp@300000000 {
+ opp-300000000 {
opp-hz = /bits/ 64 <300000000>;
opp-microvolt = <1000000>;
};
- opp@400000000 {
+ opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
opp-microvolt = <1100000>;
};
- opp@500000000 {
+ opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
opp-microvolt = <1200000>;
};
- opp@600000000 {
+ opp-600000000 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <1250000>;
};
diff --git a/arch/arm/boot/dts/ste-nomadik-nhk15.dts b/arch/arm/boot/dts/ste-nomadik-nhk15.dts
index 04066f9cb8a3..f2f6558a00f1 100644
--- a/arch/arm/boot/dts/ste-nomadik-nhk15.dts
+++ b/arch/arm/boot/dts/ste-nomadik-nhk15.dts
@@ -213,12 +213,13 @@
gpio-sck = <&gpio0 5 GPIO_ACTIVE_HIGH>;
gpio-mosi = <&gpio0 4 GPIO_ACTIVE_HIGH>;
/*
- * It's not actually active high, but the frameworks assume
- * the polarity of the passed-in GPIO is "normal" (active
- * high) then actively drives the line low to select the
- * chip.
+ * This chipselect is active high. Just setting the flags
+ * to GPIO_ACTIVE_HIGH is not enough for the SPI DT bindings,
+ * it will be ignored, only the special "spi-cs-high" flag
+ * really counts.
*/
cs-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ spi-cs-high;
num-chipselects = <1>;
/*
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-12 16:36:53 +0000