diff options
Diffstat (limited to 'arch/arm/boot')
-rw-r--r-- | arch/arm/boot/Makefile | 10 | ||||
-rw-r--r-- | arch/arm/boot/dts/Makefile | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 4 | ||||
-rw-r--r-- | arch/arm/boot/dts/dbx5x0.dtsi | 17 | ||||
-rw-r--r-- | arch/arm/boot/dts/dove.dtsi | 49 | ||||
-rw-r--r-- | arch/arm/boot/dts/exynos4210-trats.dts | 6 | ||||
-rw-r--r-- | arch/arm/boot/dts/imx23.dtsi | 1 | ||||
-rw-r--r-- | arch/arm/boot/dts/imx28.dtsi | 1 | ||||
-rw-r--r-- | arch/arm/boot/dts/imx6q-arm2.dts | 10 | ||||
-rw-r--r-- | arch/arm/boot/dts/kirkwood-lsxl.dtsi | 18 | ||||
-rw-r--r-- | arch/arm/boot/dts/omap3.dtsi | 4 | ||||
-rw-r--r-- | arch/arm/boot/dts/wm8505.dtsi | 4 | ||||
-rw-r--r-- | arch/arm/boot/dts/zynq-ep107.dts | 19 |
13 files changed, 101 insertions, 44 deletions
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 3fdab016aa5c..f2aa09eb658e 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -33,7 +33,7 @@ ifeq ($(CONFIG_XIP_KERNEL),y) $(obj)/xipImage: vmlinux FORCE $(call if_changed,objcopy) - @echo ' Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))' + $(kecho) ' Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))' $(obj)/Image $(obj)/zImage: FORCE @echo 'Kernel configured for XIP (CONFIG_XIP_KERNEL=y)' @@ -48,14 +48,14 @@ $(obj)/xipImage: FORCE $(obj)/Image: vmlinux FORCE $(call if_changed,objcopy) - @echo ' Kernel: $@ is ready' + $(kecho) ' Kernel: $@ is ready' $(obj)/compressed/vmlinux: $(obj)/Image FORCE $(Q)$(MAKE) $(build)=$(obj)/compressed $@ $(obj)/zImage: $(obj)/compressed/vmlinux FORCE $(call if_changed,objcopy) - @echo ' Kernel: $@ is ready' + $(kecho) ' Kernel: $@ is ready' endif @@ -90,7 +90,7 @@ fi $(obj)/uImage: $(obj)/zImage FORCE @$(check_for_multiple_loadaddr) $(call if_changed,uimage) - @echo ' Image $@ is ready' + $(kecho) ' Image $@ is ready' $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE $(Q)$(MAKE) $(build)=$(obj)/bootp $@ @@ -98,7 +98,7 @@ $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE $(obj)/bootpImage: $(obj)/bootp/bootp FORCE $(call if_changed,objcopy) - @echo ' Kernel: $@ is ready' + $(kecho) ' Kernel: $@ is ready' PHONY += initrd FORCE initrd: diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index c1ce813fcc4a..f37cf9fa5fa0 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -25,6 +25,8 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos4210-trats.dtb \ exynos5250-smdk5250.dtb dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb +dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ + integratorcp.dtb dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \ kirkwood-dns325.dtb \ diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index b06c0db273b1..e6391a4e6649 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -126,14 +126,14 @@ #size-cells = <0>; btn3 { - label = "Buttin 3"; + label = "Button 3"; gpios = <&pioA 30 1>; linux,code = <0x103>; gpio-key,wakeup; }; btn4 { - label = "Buttin 4"; + label = "Button 4"; gpios = <&pioA 31 1>; linux,code = <0x104>; gpio-key,wakeup; diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 748ba7aa746c..4b0e0ca08f40 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -483,6 +483,8 @@ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80004000 0x1000>; interrupts = <0 21 0x4>; + arm,primecell-periphid = <0x180024>; + #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; @@ -494,6 +496,8 @@ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80122000 0x1000>; interrupts = <0 22 0x4>; + arm,primecell-periphid = <0x180024>; + #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; @@ -505,6 +509,8 @@ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80128000 0x1000>; interrupts = <0 55 0x4>; + arm,primecell-periphid = <0x180024>; + #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; @@ -516,6 +522,8 @@ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80110000 0x1000>; interrupts = <0 12 0x4>; + arm,primecell-periphid = <0x180024>; + #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; @@ -527,6 +535,8 @@ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x8012a000 0x1000>; interrupts = <0 51 0x4>; + arm,primecell-periphid = <0x180024>; + #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; @@ -573,33 +583,38 @@ interrupts = <0 60 0x4>; status = "disabled"; }; + sdi@80118000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80118000 0x1000>; interrupts = <0 50 0x4>; status = "disabled"; }; + sdi@80005000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80005000 0x1000>; interrupts = <0 41 0x4>; status = "disabled"; }; + sdi@80119000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80119000 0x1000>; interrupts = <0 59 0x4>; status = "disabled"; }; + sdi@80114000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80114000 0x1000>; interrupts = <0 99 0x4>; status = "disabled"; }; + sdi@80008000 { compatible = "arm,pl18x", "arm,primecell"; - reg = <0x80114000 0x1000>; + reg = <0x80008000 0x1000>; interrupts = <0 100 0x4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 96fb824b5e6e..5a00022383e7 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -4,21 +4,32 @@ compatible = "marvell,dove"; model = "Marvell Armada 88AP510 SoC"; - interrupt-parent = <&intc>; - - intc: interrupt-controller { - compatible = "marvell,orion-intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0xf1020204 0x04>, - <0xf1020214 0x04>; - }; - - mbus@f1000000 { + soc@f1000000 { compatible = "simple-bus"; - ranges = <0 0xf1000000 0x4000000>; #address-cells = <1>; #size-cells = <1>; + interrupt-parent = <&intc>; + + ranges = <0xc8000000 0xc8000000 0x0100000 /* CESA SRAM 1M */ + 0xe0000000 0xe0000000 0x8000000 /* PCIe0 Mem 128M */ + 0xe8000000 0xe8000000 0x8000000 /* PCIe1 Mem 128M */ + 0xf0000000 0xf0000000 0x0100000 /* ScratchPad 1M */ + 0x00000000 0xf1000000 0x1000000 /* SB/NB regs 16M */ + 0xf2000000 0xf2000000 0x0100000 /* PCIe0 I/O 1M */ + 0xf2100000 0xf2100000 0x0100000 /* PCIe0 I/O 1M */ + 0xf8000000 0xf8000000 0x8000000>; /* BootROM 128M */ + + l2: l2-cache { + compatible = "marvell,tauros2-cache"; + marvell,tauros2-cache-features = <0>; + }; + + intc: interrupt-controller { + compatible = "marvell,orion-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x20204 0x04>, <0x20214 0x04>; + }; uart0: serial@12000 { compatible = "ns16550a"; @@ -56,11 +67,6 @@ status = "disabled"; }; - wdt: wdt@20300 { - compatible = "marvell,orion-wdt"; - reg = <0x20300 0x28>; - }; - gpio0: gpio@d0400 { compatible = "marvell,orion-gpio"; #gpio-cells = <2>; @@ -139,5 +145,14 @@ nr-ports = <1>; status = "disabled"; }; + + crypto: crypto@30000 { + compatible = "marvell,orion-crypto"; + reg = <0x30000 0x10000>, + <0xc8000000 0x800>; + reg-names = "regs", "sram"; + interrupts = <31>; + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 73567b843e72..a21511c14071 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -20,8 +20,10 @@ compatible = "samsung,trats", "samsung,exynos4210"; memory { - reg = <0x40000000 0x20000000 - 0x60000000 0x20000000>; + reg = <0x40000000 0x10000000 + 0x50000000 0x10000000 + 0x60000000 0x10000000 + 0x70000000 0x10000000>; }; chosen { diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 9ca4ca70c1bc..6d31aa383460 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -69,6 +69,7 @@ interrupts = <13>, <56>; interrupt-names = "gpmi-dma", "bch"; clocks = <&clks 34>; + clock-names = "gpmi_io"; fsl,gpmi-dma-channel = <4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index e16d63155480..55c57ea6169e 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -85,6 +85,7 @@ interrupts = <88>, <41>; interrupt-names = "gpmi-dma", "bch"; clocks = <&clks 50>; + clock-names = "gpmi_io"; fsl,gpmi-dma-channel = <4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts index 15df4c105e89..5bfa02a3f85c 100644 --- a/arch/arm/boot/dts/imx6q-arm2.dts +++ b/arch/arm/boot/dts/imx6q-arm2.dts @@ -37,6 +37,13 @@ pinctrl_hog: hoggrp { fsl,pins = < 176 0x80000000 /* MX6Q_PAD_EIM_D25__GPIO_3_25 */ + >; + }; + }; + + arm2 { + pinctrl_usdhc3_arm2: usdhc3grp-arm2 { + fsl,pins = < 1363 0x80000000 /* MX6Q_PAD_NANDF_CS0__GPIO_6_11 */ 1369 0x80000000 /* MX6Q_PAD_NANDF_CS1__GPIO_6_14 */ >; @@ -58,7 +65,8 @@ wp-gpios = <&gpio6 14 0>; vmmc-supply = <®_3p3v>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3_1>; + pinctrl-0 = <&pinctrl_usdhc3_1 + &pinctrl_usdhc3_arm2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi index 8ac51c08269d..8fea375c734d 100644 --- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi @@ -48,17 +48,19 @@ #size-cells = <0>; button@1 { label = "Function Button"; - linux,code = <132>; + linux,code = <357>; gpios = <&gpio1 9 1>; }; button@2 { label = "Power-on Switch"; - linux,code = <116>; + linux,code = <0>; + linux,input-type = <5>; gpios = <&gpio1 10 1>; }; button@3 { label = "Power-auto Switch"; - linux,code = <142>; + linux,code = <1>; + linux,input-type = <5>; gpios = <&gpio1 11 1>; }; }; @@ -67,28 +69,28 @@ compatible = "gpio-leds"; led@1 { - label = "lschlv2:blue:func"; + label = "lsxl:blue:func"; gpios = <&gpio1 4 1>; }; led@2 { - label = "lschlv2:red:alarm"; + label = "lsxl:red:alarm"; gpios = <&gpio1 5 1>; }; led@3 { - label = "lschlv2:amber:info"; + label = "lsxl:amber:info"; gpios = <&gpio1 6 1>; }; led@4 { - label = "lschlv2:blue:power"; + label = "lsxl:blue:power"; gpios = <&gpio1 7 1>; linux,default-trigger = "default-on"; }; led@5 { - label = "lschlv2:red:func"; + label = "lsxl:red:func"; gpios = <&gpio1 16 1>; }; }; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index f38ea8771b44..696e929d0304 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -257,7 +257,7 @@ interrupt-names = "common", "tx", "rx", "sidetone"; interrupt-parent = <&intc>; ti,buffer-size = <1280>; - ti,hwmods = "mcbsp2"; + ti,hwmods = "mcbsp2", "mcbsp2_sidetone"; }; mcbsp3: mcbsp@49024000 { @@ -272,7 +272,7 @@ interrupt-names = "common", "tx", "rx", "sidetone"; interrupt-parent = <&intc>; ti,buffer-size = <128>; - ti,hwmods = "mcbsp3"; + ti,hwmods = "mcbsp3", "mcbsp3_sidetone"; }; mcbsp4: mcbsp@49026000 { diff --git a/arch/arm/boot/dts/wm8505.dtsi b/arch/arm/boot/dts/wm8505.dtsi index b459691655ab..330f833ac3b0 100644 --- a/arch/arm/boot/dts/wm8505.dtsi +++ b/arch/arm/boot/dts/wm8505.dtsi @@ -71,13 +71,13 @@ ehci@d8007100 { compatible = "via,vt8500-ehci"; reg = <0xd8007100 0x200>; - interrupts = <43>; + interrupts = <1>; }; uhci@d8007300 { compatible = "platform-uhci"; reg = <0xd8007300 0x200>; - interrupts = <43>; + interrupts = <0>; }; fb@d8050800 { diff --git a/arch/arm/boot/dts/zynq-ep107.dts b/arch/arm/boot/dts/zynq-ep107.dts index 37ca192fb193..574bc044f572 100644 --- a/arch/arm/boot/dts/zynq-ep107.dts +++ b/arch/arm/boot/dts/zynq-ep107.dts @@ -36,16 +36,27 @@ ranges; intc: interrupt-controller@f8f01000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; interrupt-controller; - compatible = "arm,gic"; - reg = <0xF8F01000 0x1000>; - #interrupt-cells = <2>; + reg = <0xF8F01000 0x1000>, + <0xF8F00100 0x100>; + }; + + L2: cache-controller { + compatible = "arm,pl310-cache"; + reg = <0xF8F02000 0x1000>; + arm,data-latency = <2 3 2>; + arm,tag-latency = <2 3 2>; + cache-unified; + cache-level = <2>; }; uart0: uart@e0000000 { compatible = "xlnx,xuartps"; reg = <0xE0000000 0x1000>; - interrupts = <59 0>; + interrupts = <0 27 4>; clock = <50000000>; }; }; |