diff options
Diffstat (limited to 'arch/arm/boot')
27 files changed, 395 insertions, 32 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 8a1d0b3f55dd..8f9f0983983e 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -909,6 +909,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3288-veyron-jaq.dtb \ rk3288-veyron-jerry.dtb \ rk3288-veyron-mickey.dtb \ + rk3288-veyron-mighty.dtb \ rk3288-veyron-minnie.dtb \ rk3288-veyron-pinky.dtb \ rk3288-veyron-speedy.dtb \ diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts index 2375449c02d0..556ed469830c 100644 --- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts +++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts @@ -13,12 +13,25 @@ chosen { stdout-path = &uart5; - bootargs = "console=ttyS4,115200 earlyprintk"; + bootargs = "console=tty0 console=ttyS4,115200 earlyprintk"; }; memory@80000000 { reg = <0x80000000 0x20000000>; }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; }; &fmc { @@ -27,6 +40,7 @@ status = "okay"; m25p,fast-read; label = "bmc"; +#include "openbmc-flash-layout.dtsi" }; }; @@ -97,3 +111,8 @@ &uhci { status = "okay"; }; + +&gfx { + status = "okay"; + memory-region = <&gfx_memory>; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts index 9f194b5eeba4..43aba4071a5c 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts @@ -56,6 +56,12 @@ memory@80000000 { reg = <0x80000000 0x20000000>; }; + + ast-adc-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>; + }; }; &pinctrl { diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts index 4c2dcac738e8..c4521eda787c 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts @@ -64,6 +64,11 @@ status = "okay"; }; +&vuart { + // VUART Host Console + status = "okay"; +}; + &uart1 { // Host Console status = "okay"; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts index b854ac0bae9a..b249da80fb83 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts @@ -32,9 +32,9 @@ no-map; }; - flash_memory: region@98000000 { + flash_memory: region@5c000000 { no-map; - reg = <0x98000000 0x01000000>; /* 16MB */ + reg = <0x5C000000 0x02000000>; /* 32MB */ }; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts index 76fe994f2ba4..418a1988b262 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts @@ -35,6 +35,13 @@ reg = <0x9ef00000 0x00100000>; no-map; }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; }; leds { @@ -238,6 +245,7 @@ &gfx { status = "okay"; + memory-region = <&gfx_memory>; }; &pinctrl { diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts index ad54117c075e..f1356ca794d8 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts @@ -26,6 +26,13 @@ no-map; reg = <0x98000000 0x04000000>; /* 64M */ }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; }; gpio-keys { @@ -186,13 +193,49 @@ status = "okay"; label = "bmc"; m25p,fast-read; -#include "openbmc-flash-layout.dtsi" + + partitions { + #address-cells = < 1 >; + #size-cells = < 1 >; + compatible = "fixed-partitions"; + u-boot@0 { + reg = < 0 0x60000 >; + label = "u-boot"; + }; + u-boot-env@60000 { + reg = < 0x60000 0x20000 >; + label = "u-boot-env"; + }; + obmc-ubi@80000 { + reg = < 0x80000 0x1F80000 >; + label = "obmc-ubi"; + }; + }; }; flash@1 { status = "okay"; - label = "alt"; + label = "alt-bmc"; m25p,fast-read; + + partitions { + #address-cells = < 1 >; + #size-cells = < 1 >; + compatible = "fixed-partitions"; + u-boot@0 { + reg = < 0 0x60000 >; + label = "alt-u-boot"; + }; + u-boot-env@60000 { + reg = < 0x60000 0x20000 >; + label = "alt-u-boot-env"; + }; + obmc-ubi@80000 { + reg = < 0x80000 0x1F80000 >; + label = "alt-obmc-ubi"; + }; + }; + }; }; @@ -565,6 +608,7 @@ &gfx { status = "okay"; + memory-region = <&gfx_memory>; }; &pinctrl { @@ -592,3 +636,7 @@ &adc { status = "okay"; }; + +&vhub { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index 9549f867aa1e..5d7050d00874 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -209,6 +209,12 @@ clock-names = "PCLK"; }; + rtc: rtc@1e781000 { + compatible = "aspeed,ast2400-rtc"; + reg = <0x1e781000 0x18>; + status = "disabled"; + }; + uart1: serial@1e783000 { compatible = "ns16550a"; reg = <0x1e783000 0x20>; diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index 85ed9dbec196..4345c3153ca7 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -232,6 +232,10 @@ compatible = "aspeed,ast2500-gfx", "syscon"; reg = <0x1e6e6000 0x1000>; reg-io-width = <4>; + clocks = <&syscon ASPEED_CLK_GATE_D1CLK>; + resets = <&syscon ASPEED_RESET_CRT1>; + status = "disabled"; + interrupts = <0x19>; }; adc: adc@1e6e9000 { @@ -243,6 +247,16 @@ status = "disabled"; }; + video: video@1e700000 { + compatible = "aspeed,ast2500-video-engine"; + reg = <0x1e700000 0x1000>; + clocks = <&syscon ASPEED_CLK_GATE_VCLK>, + <&syscon ASPEED_CLK_GATE_ECLK>; + clock-names = "vclk", "eclk"; + interrupts = <7>; + status = "disabled"; + }; + sram: sram@1e720000 { compatible = "mmio-sram"; reg = <0x1e720000 0x9000>; // 36K @@ -260,6 +274,12 @@ #interrupt-cells = <2>; }; + rtc: rtc@1e781000 { + compatible = "aspeed,ast2500-rtc"; + reg = <0x1e781000 0x18>; + status = "disabled"; + }; + timer: timer@1e782000 { /* This timer is a Faraday FTTMR010 derivative */ compatible = "aspeed,ast2400-timer"; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts index 5641d162dfdb..28e7513ce617 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts @@ -93,7 +93,7 @@ }; &hdmi { - hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; + hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; }; &pwm { diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi index b715ab0fa1ff..e8d800fec637 100644 --- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi +++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi @@ -114,9 +114,9 @@ reg = <2>; }; - switch@0 { + switch@10 { compatible = "qca,qca8334"; - reg = <0>; + reg = <10>; switch_ports: ports { #address-cells = <1>; @@ -125,7 +125,7 @@ ethphy0: port@0 { reg = <0>; label = "cpu"; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; ethernet = <&fec>; fixed-link { diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi index 1d1b4bd0670f..a4217f564a53 100644 --- a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi +++ b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi @@ -264,7 +264,7 @@ pinctrl-2 = <&pinctrl_usdhc3_200mhz>; vmcc-supply = <®_sd3_vmmc>; cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; - bus-witdh = <4>; + bus-width = <4>; no-1-8-v; status = "okay"; }; @@ -275,7 +275,7 @@ pinctrl-1 = <&pinctrl_usdhc4_100mhz>; pinctrl-2 = <&pinctrl_usdhc4_200mhz>; vmcc-supply = <®_sd4_vmmc>; - bus-witdh = <8>; + bus-width = <8>; no-1-8-v; non-removable; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index 433bf09a1954..027df06c5dc7 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -91,6 +91,7 @@ pinctrl-0 = <&pinctrl_enet>; phy-handle = <ðphy>; phy-mode = "rgmii"; + phy-reset-duration = <10>; /* in msecs */ phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; phy-supply = <&vdd_eth_io_reg>; status = "disabled"; diff --git a/arch/arm/boot/dts/imx6ull-pinfunc-snvs.h b/arch/arm/boot/dts/imx6ull-pinfunc-snvs.h index f6fb6783c193..54cfe72295aa 100644 --- a/arch/arm/boot/dts/imx6ull-pinfunc-snvs.h +++ b/arch/arm/boot/dts/imx6ull-pinfunc-snvs.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (C) 2016 Freescale Semiconductor, Inc. * Copyright (C) 2017 NXP diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index a9781243453e..d2ec4af82cc5 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -345,6 +345,11 @@ status = "disabled"; }; + clock-measure@8758 { + compatible = "amlogic,meson8-clk-measure"; + reg = <0x8758 0x1c>; + }; + pinctrl_cbus: pinctrl@9880 { compatible = "amlogic,meson8-cbus-pinctrl"; reg = <0x9880 0x10>; diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts index 3b0e0f8fbc23..0157646e3a89 100644 --- a/arch/arm/boot/dts/meson8b-odroidc1.dts +++ b/arch/arm/boot/dts/meson8b-odroidc1.dts @@ -234,7 +234,59 @@ }; }; +&gpio { + gpio-line-names = /* Bank GPIOX */ + "J2 Header Pin 35", "J2 Header Pin 36", + "J2 Header Pin 32", "J2 Header Pin 31", + "J2 Header Pin 29", "J2 Header Pin 18", + "J2 Header Pin 22", "J2 Header Pin 16", + "J2 Header Pin 23", "J2 Header Pin 21", + "J2 Header Pin 19", "J2 Header Pin 33", + "J2 Header Pin 8", "J2 Header Pin 10", + "J2 Header Pin 15", "J2 Header Pin 13", + "J2 Header Pin 24", "J2 Header Pin 26", + /* Bank GPIOY */ + "Revision (upper)", "Revision (lower)", + "J2 Header Pin 7", "", "J2 Header Pin 12", + "J2 Header Pin 11", "", "", "", + "TFLASH_VDD_EN", "", "", + /* Bank GPIODV */ + "VCCK_PWM (PWM_C)", "I2CA_SDA", "I2CA_SCL", + "I2CB_SDA", "I2CB_SCL", "VDDEE_PWM (PWM_D)", + "", + /* Bank GPIOH */ + "HDMI_HPD", "HDMI_I2C_SDA", "HDMI_I2C_SCL", + "ETH_PHY_INTR", "ETH_PHY_NRST", "ETH_TXD1", + "ETH_TXD0", "ETH_TXD3", "ETH_TXD2", + "ETH_RGMII_TX_CLK", + /* Bank CARD */ + "SD_DATA1 (SDB_D1)", "SD_DATA0 (SDB_D0)", + "SD_CLK", "SD_CMD", "SD_DATA3 (SDB_D3)", + "SD_DATA2 (SDB_D2)", "SD_CDN (SD_DET_N)", + /* Bank BOOT */ + "SDC_D0 (EMMC)", "SDC_D1 (EMMC)", + "SDC_D2 (EMMC)", "SDC_D3 (EMMC)", + "SDC_D4 (EMMC)", "SDC_D5 (EMMC)", + "SDC_D6 (EMMC)", "SDC_D7 (EMMC)", + "SDC_CLK (EMMC)", "SDC_RSTn (EMMC)", + "SDC_CMD (EMMC)", "BOOT_SEL", "", "", "", + "", "", "", "", + /* Bank DIF */ + "ETH_RXD1", "ETH_RXD0", "ETH_RX_DV", + "RGMII_RX_CLK", "ETH_RXD3", "ETH_RXD2", + "ETH_TXEN", "ETH_PHY_REF_CLK_25MOUT", + "ETH_MDC", "ETH_MDIO"; +}; + &gpio_ao { + gpio-line-names = "UART TX", "UART RX", "", + "TF_3V3N_1V8_EN", "USB_HUB_RST_N", + "USB_OTG_PWREN", "J7 Header Pin 2", + "IR_IN", "J7 Header Pin 4", + "J7 Header Pin 6", "J7 Header Pin 5", + "J7 Header Pin 7", "HDMI_CEC", + "SYS_LED", "", ""; + /* * WARNING: The USB Hub on the Odroid-C1/C1+ needs a reset signal * to be turned high in order to be detected by the USB Controller. diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index fe84a8c3ce81..df42e48f1cc1 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -294,6 +294,11 @@ status = "disabled"; }; + clock-measure@8758 { + compatible = "amlogic,meson8b-clk-measure"; + reg = <0x8758 0x1c>; + }; + pinctrl_cbus: pinctrl@9880 { compatible = "amlogic,meson8b-cbus-pinctrl"; reg = <0x9880 0x10>; diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts b/arch/arm/boot/dts/rk3066a-mk808.dts index 9d2216d71f70..8bc259d3e450 100644 --- a/arch/arm/boot/dts/rk3066a-mk808.dts +++ b/arch/arm/boot/dts/rk3066a-mk808.dts @@ -30,6 +30,17 @@ }; }; + hdmi_con { + compatible = "hdmi-connector"; + type = "c"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + vcc_io: vcc-io { compatible = "regulator-fixed"; regulator-name = "vcc_io"; @@ -91,6 +102,20 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_in_vop1 { + status = "disabled"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &mmc0 { bus-width = <4>; cap-mmc-highspeed; @@ -150,6 +175,10 @@ status = "okay"; }; +&vop0 { + status = "okay"; +}; + &wdt { status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index 653127a377fa..d9504fd456a7 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -80,6 +80,11 @@ vop0_out: port { #address-cells = <1>; #size-cells = <0>; + + vop0_out_hdmi: endpoint@0 { + reg = <0>; + remote-endpoint = <&hdmi_in_vop0>; + }; }; }; @@ -101,6 +106,49 @@ vop1_out: port { #address-cells = <1>; #size-cells = <0>; + + vop1_out_hdmi: endpoint@0 { + reg = <0>; + remote-endpoint = <&hdmi_in_vop1>; + }; + }; + }; + + hdmi: hdmi@10116000 { + compatible = "rockchip,rk3066-hdmi"; + reg = <0x10116000 0x2000>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HDMI>; + clock-names = "hclk"; + pinctrl-names = "default"; + pinctrl-0 = <&hdmii2c_xfer>, <&hdmi_hpd>; + power-domains = <&power RK3066_PD_VIO>; + rockchip,grf = <&grf>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in_vop0: endpoint@0 { + reg = <0>; + remote-endpoint = <&vop0_out_hdmi>; + }; + + hdmi_in_vop1: endpoint@1 { + reg = <1>; + remote-endpoint = <&vop1_out_hdmi>; + }; + }; + + hdmi_out: port@1 { + reg = <1>; + }; }; }; @@ -380,6 +428,17 @@ */ }; + hdmi { + hdmi_hpd: hdmi-hpd { + rockchip,pins = <0 RK_PA0 1 &pcfg_pull_default>; + }; + + hdmii2c_xfer: hdmii2c-xfer { + rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>, + <0 RK_PA2 1 &pcfg_pull_none>; + }; + }; + i2c0 { i2c0_xfer: i2c0-xfer { rockchip,pins = <RK_GPIO2 28 RK_FUNC_1 &pcfg_pull_none>, diff --git a/arch/arm/boot/dts/rk3288-tinker-s.dts b/arch/arm/boot/dts/rk3288-tinker-s.dts index d97da89bcd51..970e13859198 100644 --- a/arch/arm/boot/dts/rk3288-tinker-s.dts +++ b/arch/arm/boot/dts/rk3288-tinker-s.dts @@ -23,3 +23,8 @@ mmc-ddr-1_8v; status = "okay"; }; + +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec_c0>; +}; diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi index aa107ee41b8b..b053589f8ff8 100644 --- a/arch/arm/boot/dts/rk3288-tinker.dtsi +++ b/arch/arm/boot/dts/rk3288-tinker.dtsi @@ -5,6 +5,7 @@ #include "rk3288.dtsi" #include <dt-bindings/input/input.h> +#include <dt-bindings/clock/rockchip,rk808.h> / { chosen { @@ -61,6 +62,16 @@ }; }; + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 RK808_CLKOUT1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable>; + reset-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_LOW>, + <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,format = "i2s"; @@ -337,6 +348,7 @@ status = "okay"; sdcard-supply = <&vccio_sd>; + wifi-supply = <&vcc_18>; }; &pinctrl { @@ -415,6 +427,13 @@ rockchip,pins = <7 8 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + + sdio { + wifi_enable: wifi-enable { + rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>, + <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &pwm0 { @@ -439,6 +458,24 @@ vqmmc-supply = <&vccio_sd>; }; +&sdio0 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + max-frequency = <50000000>; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>, <&sdio0_int>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc_18>; + status = "okay"; +}; + &tsadc { rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */ rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */ diff --git a/arch/arm/boot/dts/rk3288-veyron-jerry.dts b/arch/arm/boot/dts/rk3288-veyron-jerry.dts index 2ba89895c33a..3e8f700a0d64 100644 --- a/arch/arm/boot/dts/rk3288-veyron-jerry.dts +++ b/arch/arm/boot/dts/rk3288-veyron-jerry.dts @@ -11,7 +11,10 @@ / { model = "Google Jerry"; - compatible = "google,veyron-jerry-rev7", "google,veyron-jerry-rev6", + compatible = "google,veyron-jerry-rev15", "google,veyron-jerry-rev14", + "google,veyron-jerry-rev13", "google,veyron-jerry-rev12", + "google,veyron-jerry-rev11", "google,veyron-jerry-rev10", + "google,veyron-jerry-rev7", "google,veyron-jerry-rev6", "google,veyron-jerry-rev5", "google,veyron-jerry-rev4", "google,veyron-jerry-rev3", "google,veyron-jerry", "google,veyron", "rockchip,rk3288"; @@ -61,7 +64,9 @@ &rk808 { pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>; + pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>; + dvs-gpios = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>, + <&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>; regulators { mic_vcc: LDO_REG2 { diff --git a/arch/arm/boot/dts/rk3288-veyron-mighty.dts b/arch/arm/boot/dts/rk3288-veyron-mighty.dts new file mode 100644 index 000000000000..f640857cbdae --- /dev/null +++ b/arch/arm/boot/dts/rk3288-veyron-mighty.dts @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Veyron Mighty Rev 1+ board device tree source + * + * Copyright 2015 Google, Inc + */ + +/dts-v1/; + +#include "rk3288-veyron-jaq.dts" + +/ { + model = "Google Mighty"; + compatible = "google,veyron-mighty-rev5", "google,veyron-mighty-rev4", + "google,veyron-mighty-rev3", "google,veyron-mighty-rev2", + "google,veyron-mighty-rev1", "google,veyron-mighty", + "google,veyron", "rockchip,rk3288"; +}; + +&sdmmc { + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio + &sdmmc_wp_gpio &sdmmc_bus4>; + wp-gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>; + + /delete-property/ disable-wp; +}; + +&pinctrl { + sdmmc { + sdmmc_wp_gpio: sdmmc-wp-gpio { + rockchip,pins = <7 10 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index 0bc2409f6903..5181d9435fda 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -95,6 +95,23 @@ regulator-boot-on; vin-supply = <&vcc_5v>; }; + + vdd_logic: vdd-logic { + compatible = "pwm-regulator"; + regulator-name = "vdd_logic"; + + pwms = <&pwm1 0 1994 0>; + pwm-supply = <&vcc33_sys>; + + pwm-dutycycle-range = <0x7b 0>; + pwm-dutycycle-unit = <0x94>; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <4000>; + }; }; &cpu0 { diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index ca7d52daa8fb..743a7d85daf7 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -569,6 +569,7 @@ pinctrl-1 = <&otp_out>; pinctrl-2 = <&otp_gpio>; #thermal-sensor-cells = <1>; + rockchip,grf = <&grf>; rockchip,hw-tshut-temp = <95000>; status = "disabled"; }; @@ -1378,19 +1379,6 @@ reg = <0x0 0xffaf0080 0x0 0x20>; }; - gic: interrupt-controller@ffc01000 { - compatible = "arm,gic-400"; - interrupt-controller; - #interrupt-cells = <3>; - #address-cells = <0>; - - reg = <0x0 0xffc01000 0x0 0x1000>, - <0x0 0xffc02000 0x0 0x2000>, - <0x0 0xffc04000 0x0 0x2000>, - <0x0 0xffc06000 0x0 0x2000>; - interrupts = <GIC_PPI 9 0xf04>; - }; - efuse: efuse@ffb40000 { compatible = "rockchip,rk3288-efuse"; reg = <0x0 0xffb40000 0x0 0x20>; @@ -1404,6 +1392,19 @@ }; }; + gic: interrupt-controller@ffc01000 { + compatible = "arm,gic-400"; + interrupt-controller; + #interrupt-cells = <3>; + #address-cells = <0>; + + reg = <0x0 0xffc01000 0x0 0x1000>, + <0x0 0xffc02000 0x0 0x2000>, + <0x0 0xffc04000 0x0 0x2000>, + <0x0 0xffc06000 0x0 0x2000>; + interrupts = <GIC_PPI 9 0xf04>; + }; + pinctrl: pinctrl { compatible = "rockchip,rk3288-pinctrl"; rockchip,grf = <&grf>; diff --git a/arch/arm/boot/dts/rv1108-elgin-r1.dts b/arch/arm/boot/dts/rv1108-elgin-r1.dts index 1c4507b66fdd..b1db924710c8 100644 --- a/arch/arm/boot/dts/rv1108-elgin-r1.dts +++ b/arch/arm/boot/dts/rv1108-elgin-r1.dts @@ -37,7 +37,6 @@ &emmc { bus-width = <8>; cap-mmc-highspeed; - disable-wp; no-sd; no-sdio; non-removable; diff --git a/arch/arm/boot/dts/ste-nomadik-nhk15.dts b/arch/arm/boot/dts/ste-nomadik-nhk15.dts index 04066f9cb8a3..f2f6558a00f1 100644 --- a/arch/arm/boot/dts/ste-nomadik-nhk15.dts +++ b/arch/arm/boot/dts/ste-nomadik-nhk15.dts @@ -213,12 +213,13 @@ gpio-sck = <&gpio0 5 GPIO_ACTIVE_HIGH>; gpio-mosi = <&gpio0 4 GPIO_ACTIVE_HIGH>; /* - * It's not actually active high, but the frameworks assume - * the polarity of the passed-in GPIO is "normal" (active - * high) then actively drives the line low to select the - * chip. + * This chipselect is active high. Just setting the flags + * to GPIO_ACTIVE_HIGH is not enough for the SPI DT bindings, + * it will be ignored, only the special "spi-cs-high" flag + * really counts. */ cs-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + spi-cs-high; num-chipselects = <1>; /* |