diff options
Diffstat (limited to 'arch/arm/boot')
-rw-r--r-- | arch/arm/boot/dts/Makefile | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/stm32f429.dtsi | 13 | ||||
-rw-r--r-- | arch/arm/boot/dts/stm32f769-disco.dts | 4 | ||||
-rw-r--r-- | arch/arm/boot/dts/stm32h743-pinctrl.dtsi | 68 | ||||
-rw-r--r-- | arch/arm/boot/dts/stm32h743.dtsi | 14 | ||||
-rw-r--r-- | arch/arm/boot/dts/stm32h743i-disco.dts | 20 | ||||
-rw-r--r-- | arch/arm/boot/dts/stm32h743i-eval.dts | 23 | ||||
-rw-r--r-- | arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 269 | ||||
-rw-r--r-- | arch/arm/boot/dts/stm32mp157a-dk1.dts | 250 | ||||
-rw-r--r-- | arch/arm/boot/dts/stm32mp157c-dk2.dts | 76 | ||||
-rw-r--r-- | arch/arm/boot/dts/stm32mp157c-ed1.dts | 175 | ||||
-rw-r--r-- | arch/arm/boot/dts/stm32mp157c.dtsi | 56 |
12 files changed, 964 insertions, 6 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 48282ebfb3da..8f9f0983983e 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -965,6 +965,8 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32746g-eval.dtb \ stm32h743i-eval.dtb \ stm32h743i-disco.dtb \ + stm32mp157a-dk1.dtb \ + stm32mp157c-dk2.dtb \ stm32mp157c-ed1.dtb \ stm32mp157c-ev1.dtb dtb-$(CONFIG_MACH_SUN4I) += \ diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index 588b6ef94e93..4a4954492ed1 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -80,6 +80,19 @@ }; soc { + romem: nvmem@1fff7800 { + compatible = "st,stm32f4-otp"; + reg = <0x1fff7800 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ts_cal1: calib@22c { + reg = <0x22c 0x2>; + }; + ts_cal2: calib@22e { + reg = <0x22e 0x2>; + }; + }; + timer2: timer@40000000 { compatible = "st,stm32-timer"; reg = <0x40000000 0x400>; diff --git a/arch/arm/boot/dts/stm32f769-disco.dts b/arch/arm/boot/dts/stm32f769-disco.dts index 3c7216844a9b..6f1d0ac8c31c 100644 --- a/arch/arm/boot/dts/stm32f769-disco.dts +++ b/arch/arm/boot/dts/stm32f769-disco.dts @@ -102,6 +102,10 @@ }; }; +&rcc { + compatible = "st,stm32f769-rcc", "st,stm32f746-rcc", "st,stm32-rcc"; +}; + &cec { pinctrl-0 = <&cec_pins_a>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi index 980b2769caf9..e44e7baa3f17 100644 --- a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi @@ -188,6 +188,74 @@ }; }; + sdmmc1_b4_pins_a: sdmmc1-b4-0 { + pins { + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */ + <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */ + <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ + slew-rate = <3>; + drive-push-pull; + bias-disable; + }; + }; + + sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 { + pins1 { + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */ + <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */ + slew-rate = <3>; + drive-push-pull; + bias-disable; + }; + pins2{ + pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ + slew-rate = <3>; + drive-open-drain; + bias-disable; + }; + }; + + sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 { + pins { + pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */ + <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */ + <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */ + }; + }; + + sdmmc1_dir_pins_a: sdmmc1-dir-0 { + pins1 { + pinmux = <STM32_PINMUX('C', 6, AF8)>, /* SDMMC1_D0DIR */ + <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */ + <STM32_PINMUX('B', 9, AF7)>; /* SDMMC1_CDIR */ + slew-rate = <3>; + drive-push-pull; + bias-pull-up; + }; + pins2{ + pinmux = <STM32_PINMUX('B', 8, AF7)>; /* SDMMC1_CKIN */ + bias-pull-up; + }; + }; + + sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 { + pins { + pinmux = <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC1_D0DIR */ + <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */ + <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */ + <STM32_PINMUX('B', 8, ANALOG)>; /* SDMMC1_CKIN */ + }; + }; + usart1_pins: usart1@0 { pins1 { pinmux = <STM32_PINMUX('B', 14, AF4)>; /* USART1_TX */ diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi index 5cac79ebebb1..c065266ee377 100644 --- a/arch/arm/boot/dts/stm32h743.dtsi +++ b/arch/arm/boot/dts/stm32h743.dtsi @@ -339,6 +339,20 @@ dma-requests = <32>; }; + sdmmc1: sdmmc@52007000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x10153180>; + reg = <0x52007000 0x1000>; + interrupts = <49>; + interrupt-names = "cmd_irq"; + clocks = <&rcc SDMMC1_CK>; + clock-names = "apb_pclk"; + resets = <&rcc STM32H7_AHB3_RESET(SDMMC1)>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <120000000>; + }; + exti: interrupt-controller@58000000 { compatible = "st,stm32h7-exti"; interrupt-controller; diff --git a/arch/arm/boot/dts/stm32h743i-disco.dts b/arch/arm/boot/dts/stm32h743i-disco.dts index dd06c8f3d09a..3acd2e9c434e 100644 --- a/arch/arm/boot/dts/stm32h743i-disco.dts +++ b/arch/arm/boot/dts/stm32h743i-disco.dts @@ -61,6 +61,14 @@ aliases { serial0 = &usart2; }; + + v3v3: regulator-v3v3 { + compatible = "regulator-fixed"; + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; }; &clk_hse { @@ -84,6 +92,18 @@ }; }; +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + broken-cd; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + status = "okay"; +}; + &usart2 { pinctrl-0 = <&usart2_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/stm32h743i-eval.dts b/arch/arm/boot/dts/stm32h743i-eval.dts index ebc3f0933f5c..ab78ad532375 100644 --- a/arch/arm/boot/dts/stm32h743i-eval.dts +++ b/arch/arm/boot/dts/stm32h743i-eval.dts @@ -70,13 +70,20 @@ regulator-always-on; }; + v2v9_sd: regulator-v2v9_sd { + compatible = "regulator-fixed"; + regulator-name = "v2v9_sd"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + regulator-always-on; + }; + usbotg_hs_phy: usb-phy { #phy-cells = <0>; compatible = "usb-nop-xceiv"; clocks = <&rcc USB1ULPI_CK>; clock-names = "main_clk"; }; - }; &adc_12 { @@ -122,6 +129,20 @@ }; }; +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>; + broken-cd; + st,sig-dir; + st,neg-edge; + st,use-ckin; + bus-width = <4>; + vmmc-supply = <&v2v9_sd>; + status = "okay"; +}; + &usart1 { pinctrl-0 = <&usart1_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi index 9ec4694e93a7..85c417d9983b 100644 --- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi @@ -157,6 +157,27 @@ }; }; + cec_pins_sleep_a: cec-sleep-0 { + pins { + pinmux = <STM32_PINMUX('A', 15, ANALOG)>; /* HDMI_CEC */ + }; + }; + + cec_pins_b: cec-1 { + pins { + pinmux = <STM32_PINMUX('B', 6, AF5)>; + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + cec_pins_sleep_b: cec-sleep-1 { + pins { + pinmux = <STM32_PINMUX('B', 6, ANALOG)>; /* HDMI_CEC */ + }; + }; + ethernet0_rgmii_pins_a: rgmii-0 { pins1 { pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */ @@ -213,6 +234,13 @@ }; }; + i2c1_pins_sleep_a: i2c1-1 { + pins { + pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */ + <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */ + }; + }; + i2c2_pins_a: i2c2-0 { pins { pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */ @@ -223,6 +251,13 @@ }; }; + i2c2_pins_sleep_a: i2c2-1 { + pins { + pinmux = <STM32_PINMUX('H', 4, ANALOG)>, /* I2C2_SCL */ + <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */ + }; + }; + i2c5_pins_a: i2c5-0 { pins { pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */ @@ -233,6 +268,152 @@ }; }; + i2c5_pins_sleep_a: i2c5-1 { + pins { + pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* I2C5_SCL */ + <STM32_PINMUX('A', 12, ANALOG)>; /* I2C5_SDA */ + + }; + }; + + ltdc_pins_a: ltdc-a-0 { + pins { + pinmux = <STM32_PINMUX('G', 7, AF14)>, /* LCD_CLK */ + <STM32_PINMUX('I', 10, AF14)>, /* LCD_HSYNC */ + <STM32_PINMUX('I', 9, AF14)>, /* LCD_VSYNC */ + <STM32_PINMUX('F', 10, AF14)>, /* LCD_DE */ + <STM32_PINMUX('H', 2, AF14)>, /* LCD_R0 */ + <STM32_PINMUX('H', 3, AF14)>, /* LCD_R1 */ + <STM32_PINMUX('H', 8, AF14)>, /* LCD_R2 */ + <STM32_PINMUX('H', 9, AF14)>, /* LCD_R3 */ + <STM32_PINMUX('H', 10, AF14)>, /* LCD_R4 */ + <STM32_PINMUX('C', 0, AF14)>, /* LCD_R5 */ + <STM32_PINMUX('H', 12, AF14)>, /* LCD_R6 */ + <STM32_PINMUX('E', 15, AF14)>, /* LCD_R7 */ + <STM32_PINMUX('E', 5, AF14)>, /* LCD_G0 */ + <STM32_PINMUX('E', 6, AF14)>, /* LCD_G1 */ + <STM32_PINMUX('H', 13, AF14)>, /* LCD_G2 */ + <STM32_PINMUX('H', 14, AF14)>, /* LCD_G3 */ + <STM32_PINMUX('H', 15, AF14)>, /* LCD_G4 */ + <STM32_PINMUX('I', 0, AF14)>, /* LCD_G5 */ + <STM32_PINMUX('I', 1, AF14)>, /* LCD_G6 */ + <STM32_PINMUX('I', 2, AF14)>, /* LCD_G7 */ + <STM32_PINMUX('D', 9, AF14)>, /* LCD_B0 */ + <STM32_PINMUX('G', 12, AF14)>, /* LCD_B1 */ + <STM32_PINMUX('G', 10, AF14)>, /* LCD_B2 */ + <STM32_PINMUX('D', 10, AF14)>, /* LCD_B3 */ + <STM32_PINMUX('I', 4, AF14)>, /* LCD_B4 */ + <STM32_PINMUX('A', 3, AF14)>, /* LCD_B5 */ + <STM32_PINMUX('B', 8, AF14)>, /* LCD_B6 */ + <STM32_PINMUX('D', 8, AF14)>; /* LCD_B7 */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + }; + + ltdc_pins_sleep_a: ltdc-a-1 { + pins { + pinmux = <STM32_PINMUX('G', 7, ANALOG)>, /* LCD_CLK */ + <STM32_PINMUX('I', 10, ANALOG)>, /* LCD_HSYNC */ + <STM32_PINMUX('I', 9, ANALOG)>, /* LCD_VSYNC */ + <STM32_PINMUX('F', 10, ANALOG)>, /* LCD_DE */ + <STM32_PINMUX('H', 2, ANALOG)>, /* LCD_R0 */ + <STM32_PINMUX('H', 3, ANALOG)>, /* LCD_R1 */ + <STM32_PINMUX('H', 8, ANALOG)>, /* LCD_R2 */ + <STM32_PINMUX('H', 9, ANALOG)>, /* LCD_R3 */ + <STM32_PINMUX('H', 10, ANALOG)>, /* LCD_R4 */ + <STM32_PINMUX('C', 0, ANALOG)>, /* LCD_R5 */ + <STM32_PINMUX('H', 12, ANALOG)>, /* LCD_R6 */ + <STM32_PINMUX('E', 15, ANALOG)>, /* LCD_R7 */ + <STM32_PINMUX('E', 5, ANALOG)>, /* LCD_G0 */ + <STM32_PINMUX('E', 6, ANALOG)>, /* LCD_G1 */ + <STM32_PINMUX('H', 13, ANALOG)>, /* LCD_G2 */ + <STM32_PINMUX('H', 14, ANALOG)>, /* LCD_G3 */ + <STM32_PINMUX('H', 15, ANALOG)>, /* LCD_G4 */ + <STM32_PINMUX('I', 0, ANALOG)>, /* LCD_G5 */ + <STM32_PINMUX('I', 1, ANALOG)>, /* LCD_G6 */ + <STM32_PINMUX('I', 2, ANALOG)>, /* LCD_G7 */ + <STM32_PINMUX('D', 9, ANALOG)>, /* LCD_B0 */ + <STM32_PINMUX('G', 12, ANALOG)>, /* LCD_B1 */ + <STM32_PINMUX('G', 10, ANALOG)>, /* LCD_B2 */ + <STM32_PINMUX('D', 10, ANALOG)>, /* LCD_B3 */ + <STM32_PINMUX('I', 4, ANALOG)>, /* LCD_B4 */ + <STM32_PINMUX('A', 3, ANALOG)>, /* LCD_B5 */ + <STM32_PINMUX('B', 8, ANALOG)>, /* LCD_B6 */ + <STM32_PINMUX('D', 8, ANALOG)>; /* LCD_B7 */ + }; + }; + + ltdc_pins_b: ltdc-b-0 { + pins { + pinmux = <STM32_PINMUX('I', 14, AF14)>, /* LCD_CLK */ + <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */ + <STM32_PINMUX('I', 13, AF14)>, /* LCD_VSYNC */ + <STM32_PINMUX('K', 7, AF14)>, /* LCD_DE */ + <STM32_PINMUX('I', 15, AF14)>, /* LCD_R0 */ + <STM32_PINMUX('J', 0, AF14)>, /* LCD_R1 */ + <STM32_PINMUX('J', 1, AF14)>, /* LCD_R2 */ + <STM32_PINMUX('J', 2, AF14)>, /* LCD_R3 */ + <STM32_PINMUX('J', 3, AF14)>, /* LCD_R4 */ + <STM32_PINMUX('J', 4, AF14)>, /* LCD_R5 */ + <STM32_PINMUX('J', 5, AF14)>, /* LCD_R6 */ + <STM32_PINMUX('J', 6, AF14)>, /* LCD_R7 */ + <STM32_PINMUX('J', 7, AF14)>, /* LCD_G0 */ + <STM32_PINMUX('J', 8, AF14)>, /* LCD_G1 */ + <STM32_PINMUX('J', 9, AF14)>, /* LCD_G2 */ + <STM32_PINMUX('J', 10, AF14)>, /* LCD_G3 */ + <STM32_PINMUX('J', 11, AF14)>, /* LCD_G4 */ + <STM32_PINMUX('K', 0, AF14)>, /* LCD_G5 */ + <STM32_PINMUX('K', 1, AF14)>, /* LCD_G6 */ + <STM32_PINMUX('K', 2, AF14)>, /* LCD_G7 */ + <STM32_PINMUX('J', 12, AF14)>, /* LCD_B0 */ + <STM32_PINMUX('J', 13, AF14)>, /* LCD_B1 */ + <STM32_PINMUX('J', 14, AF14)>, /* LCD_B2 */ + <STM32_PINMUX('J', 15, AF14)>, /* LCD_B3 */ + <STM32_PINMUX('K', 3, AF14)>, /* LCD_B4 */ + <STM32_PINMUX('K', 4, AF14)>, /* LCD_B5 */ + <STM32_PINMUX('K', 5, AF14)>, /* LCD_B6 */ + <STM32_PINMUX('K', 6, AF14)>; /* LCD_B7 */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + }; + + ltdc_pins_sleep_b: ltdc-b-1 { + pins { + pinmux = <STM32_PINMUX('I', 14, ANALOG)>, /* LCD_CLK */ + <STM32_PINMUX('I', 12, ANALOG)>, /* LCD_HSYNC */ + <STM32_PINMUX('I', 13, ANALOG)>, /* LCD_VSYNC */ + <STM32_PINMUX('K', 7, ANALOG)>, /* LCD_DE */ + <STM32_PINMUX('I', 15, ANALOG)>, /* LCD_R0 */ + <STM32_PINMUX('J', 0, ANALOG)>, /* LCD_R1 */ + <STM32_PINMUX('J', 1, ANALOG)>, /* LCD_R2 */ + <STM32_PINMUX('J', 2, ANALOG)>, /* LCD_R3 */ + <STM32_PINMUX('J', 3, ANALOG)>, /* LCD_R4 */ + <STM32_PINMUX('J', 4, ANALOG)>, /* LCD_R5 */ + <STM32_PINMUX('J', 5, ANALOG)>, /* LCD_R6 */ + <STM32_PINMUX('J', 6, ANALOG)>, /* LCD_R7 */ + <STM32_PINMUX('J', 7, ANALOG)>, /* LCD_G0 */ + <STM32_PINMUX('J', 8, ANALOG)>, /* LCD_G1 */ + <STM32_PINMUX('J', 9, ANALOG)>, /* LCD_G2 */ + <STM32_PINMUX('J', 10, ANALOG)>, /* LCD_G3 */ + <STM32_PINMUX('J', 11, ANALOG)>, /* LCD_G4 */ + <STM32_PINMUX('K', 0, ANALOG)>, /* LCD_G5 */ + <STM32_PINMUX('K', 1, ANALOG)>, /* LCD_G6 */ + <STM32_PINMUX('K', 2, ANALOG)>, /* LCD_G7 */ + <STM32_PINMUX('J', 12, ANALOG)>, /* LCD_B0 */ + <STM32_PINMUX('J', 13, ANALOG)>, /* LCD_B1 */ + <STM32_PINMUX('J', 14, ANALOG)>, /* LCD_B2 */ + <STM32_PINMUX('J', 15, ANALOG)>, /* LCD_B3 */ + <STM32_PINMUX('K', 3, ANALOG)>, /* LCD_B4 */ + <STM32_PINMUX('K', 4, ANALOG)>, /* LCD_B5 */ + <STM32_PINMUX('K', 5, ANALOG)>, /* LCD_B6 */ + <STM32_PINMUX('K', 6, ANALOG)>; /* LCD_B7 */ + }; + }; + m_can1_pins_a: m-can1-0 { pins1 { pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */ @@ -325,6 +506,87 @@ }; }; + sdmmc1_b4_pins_a: sdmmc1-b4-0 { + pins { + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */ + <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */ + <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ + slew-rate = <3>; + drive-push-pull; + bias-disable; + }; + }; + + sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 { + pins1 { + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */ + <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */ + slew-rate = <3>; + drive-push-pull; + bias-disable; + }; + pins2{ + pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ + slew-rate = <3>; + drive-open-drain; + bias-disable; + }; + }; + + sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 { + pins { + pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */ + <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */ + <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */ + }; + }; + + sdmmc1_dir_pins_a: sdmmc1-dir-0 { + pins1 { + pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */ + <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */ + <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */ + slew-rate = <3>; + drive-push-pull; + bias-pull-up; + }; + pins2{ + pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */ + bias-pull-up; + }; + }; + + sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 { + pins { + pinmux = <STM32_PINMUX('F', 2, ANALOG)>, /* SDMMC1_D0DIR */ + <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */ + <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */ + <STM32_PINMUX('E', 4, ANALOG)>; /* SDMMC1_CKIN */ + }; + }; + + spdifrx_pins_a: spdifrx-0 { + pins { + pinmux = <STM32_PINMUX('G', 12, AF8)>; /* SPDIF_IN1 */ + bias-disable; + }; + }; + + spdifrx_sleep_pins_a: spdifrx-1 { + pins { + pinmux = <STM32_PINMUX('G', 12, ANALOG)>; /* SPDIF_IN1 */ + }; + }; + uart4_pins_a: uart4-0 { pins1 { pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */ @@ -371,6 +633,13 @@ }; }; + i2c4_pins_sleep_a: i2c4-1 { + pins { + pinmux = <STM32_PINMUX('Z', 4, ANALOG)>, /* I2C4_SCL */ + <STM32_PINMUX('Z', 5, ANALOG)>; /* I2C4_SDA */ + }; + }; + spi1_pins_a: spi1-0 { pins1 { pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */ diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts new file mode 100644 index 000000000000..098dbfb06b61 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts @@ -0,0 +1,250 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. + */ + +/dts-v1/; + +#include "stm32mp157c.dtsi" +#include "stm32mp157-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/mfd/st,stpmic1.h> + +/ { + model = "STMicroelectronics STM32MP157A-DK1 Discovery Board"; + compatible = "st,stm32mp157a-dk1", "st,stm32mp157"; + + aliases { + ethernet0 = ðernet0; + serial0 = &uart4; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@c0000000 { + reg = <0xc0000000 0x20000000>; + }; + + led { + compatible = "gpio-leds"; + blue { + label = "heartbeat"; + gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; +}; + +&cec { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cec_pins_b>; + pinctrl-1 = <&cec_pins_sleep_b>; + status = "okay"; +}; + +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rgmii_pins_a>; + pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rgmii"; + max-speed = <1000>; + phy-handle = <&phy0>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + + pmic: stpmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + status = "okay"; + + regulators { + compatible = "st,stpmic1-regulators"; + ldo1-supply = <&v3v3>; + ldo3-supply = <&vdd_ddr>; + ldo6-supply = <&v3v3>; + pwr_sw1-supply = <&bst_out>; + pwr_sw2-supply = <&bst_out>; + + vddcore: buck1 { + regulator-name = "vddcore"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd_ddr: buck2 { + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd: buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + st,mask-reset; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + v3v3: buck4 { + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-over-current-protection; + regulator-initial-mode = <0>; + }; + + v1v8_audio: ldo1 { + regulator-name = "v1v8_audio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO1 0>; + }; + + v3v3_hdmi: ldo2 { + regulator-name = "v3v3_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO2 0>; + }; + + vtt_ddr: ldo3 { + regulator-name = "vtt_ddr"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + regulator-over-current-protection; + }; + + vdd_usb: ldo4 { + regulator-name = "vdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + interrupts = <IT_CURLIM_LDO4 0>; + }; + + vdda: ldo5 { + regulator-name = "vdda"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = <IT_CURLIM_LDO5 0>; + regulator-boot-on; + }; + + v1v2_hdmi: ldo6 { + regulator-name = "v1v2_hdmi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO6 0>; + }; + + vref_ddr: vref_ddr { + regulator-name = "vref_ddr"; + regulator-always-on; + regulator-over-current-protection; + }; + + bst_out: boost { + regulator-name = "bst_out"; + interrupts = <IT_OCP_BOOST 0>; + }; + + vbus_otg: pwr_sw1 { + regulator-name = "vbus_otg"; + interrupts = <IT_OCP_OTG 0>; + }; + + vbus_sw: pwr_sw2 { + regulator-name = "vbus_sw"; + interrupts = <IT_OCP_SWOUT 0>; + regulator-active-discharge; + }; + }; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>; + interrupt-names = "onkey-falling", "onkey-rising"; + power-off-time-sec = <10>; + status = "okay"; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + status = "disabled"; + }; + }; +}; + +&ipcc { + status = "okay"; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +&rng1 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + broken-cd; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp157c-dk2.dts b/arch/arm/boot/dts/stm32mp157c-dk2.dts new file mode 100644 index 000000000000..20ea601a546d --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157c-dk2.dts @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. + */ + +/dts-v1/; + +#include "stm32mp157a-dk1.dts" + +/ { + model = "STMicroelectronics STM32MP157C-DK2 Discovery Board"; + compatible = "st,stm32mp157c-dk2", "st,stm32mp157"; + + reg18: reg18 { + compatible = "regulator-fixed"; + regulator-name = "reg18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; +}; + +&dsi { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + phy-dsi-supply = <®18>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi_in: endpoint { + remote-endpoint = <<dc_ep1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + + panel@0 { + compatible = "orisetech,otm8009a"; + reg = <0>; + reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>; + power-supply = <&v3v3>; + status = "okay"; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; +}; + +<dc { + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + ltdc_ep1_out: endpoint@1 { + reg = <1>; + remote-endpoint = <&dsi_in>; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts index d66edb0c66cd..62a8c78e7e2e 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts @@ -7,6 +7,8 @@ #include "stm32mp157c.dtsi" #include "stm32mp157-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/mfd/st,stpmic1.h> / { model = "STMicroelectronics STM32MP157C eval daughter"; @@ -41,12 +43,17 @@ regulator-always-on; }; - vdd_usb: vdd-usb { - compatible = "regulator-fixed"; - regulator-name = "vdd_usb"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + sd_switch: regulator-sd_switch { + compatible = "regulator-gpio"; + regulator-name = "sd_switch"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-type = "voltage"; regulator-always-on; + + gpios = <&gpiof 14 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + states = <1800000 0x1 2900000 0x0>; }; }; @@ -60,6 +67,149 @@ i2c-scl-rising-time-ns = <185>; i2c-scl-falling-time-ns = <20>; status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + + pmic: stpmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + status = "okay"; + + regulators { + compatible = "st,stpmic1-regulators"; + ldo1-supply = <&v3v3>; + ldo2-supply = <&v3v3>; + ldo3-supply = <&vdd_ddr>; + ldo5-supply = <&v3v3>; + ldo6-supply = <&v3v3>; + pwr_sw1-supply = <&bst_out>; + pwr_sw2-supply = <&bst_out>; + + vddcore: buck1 { + regulator-name = "vddcore"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd_ddr: buck2 { + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd: buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + st,mask-reset; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + v3v3: buck4 { + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-over-current-protection; + regulator-initial-mode = <0>; + }; + + vdda: ldo1 { + regulator-name = "vdda"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = <IT_CURLIM_LDO1 0>; + }; + + v2v8: ldo2 { + regulator-name = "v2v8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + interrupts = <IT_CURLIM_LDO2 0>; + }; + + vtt_ddr: ldo3 { + regulator-name = "vtt_ddr"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + regulator-over-current-protection; + }; + + vdd_usb: ldo4 { + regulator-name = "vdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + interrupts = <IT_CURLIM_LDO4 0>; + }; + + vdd_sd: ldo5 { + regulator-name = "vdd_sd"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = <IT_CURLIM_LDO5 0>; + regulator-boot-on; + }; + + v1v8: ldo6 { + regulator-name = "v1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + interrupts = <IT_CURLIM_LDO6 0>; + }; + + vref_ddr: vref_ddr { + regulator-name = "vref_ddr"; + regulator-always-on; + regulator-over-current-protection; + }; + + bst_out: boost { + regulator-name = "bst_out"; + interrupts = <IT_OCP_BOOST 0>; + }; + + vbus_otg: pwr_sw1 { + regulator-name = "vbus_otg"; + interrupts = <IT_OCP_OTG 0>; + }; + + vbus_sw: pwr_sw2 { + regulator-name = "vbus_sw"; + interrupts = <IT_OCP_SWOUT 0>; + regulator-active-discharge; + }; + }; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>; + interrupt-names = "onkey-falling", "onkey-rising"; + power-off-time-sec = <10>; + status = "okay"; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + status = "disabled"; + }; + }; +}; + +&ipcc { + status = "okay"; }; &iwdg2 { @@ -75,6 +225,21 @@ status = "okay"; }; +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>; + broken-cd; + st,sig-dir; + st,neg-edge; + st,use-ckin; + bus-width = <4>; + vmmc-supply = <&vdd_sd>; + vqmmc-supply = <&sd_switch>; + status = "okay"; +}; + &timers6 { status = "okay"; /* spare dmas for other usage */ diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi index f8bbfff5950b..2afeee65c3ea 100644 --- a/arch/arm/boot/dts/stm32mp157c.dtsi +++ b/arch/arm/boot/dts/stm32mp157c.dtsi @@ -379,6 +379,19 @@ status = "disabled"; }; + spdifrx: audio-controller@4000d000 { + compatible = "st,stm32h7-spdifrx"; + #sound-dai-cells = <0>; + reg = <0x4000d000 0x400>; + clocks = <&rcc SPDIF_K>; + clock-names = "kclk"; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 93 0x400 0x01>, + <&dmamux1 94 0x400 0x01>; + dma-names = "rx", "rx-ctrl"; + status = "disabled"; + }; + usart2: serial@4000e000 { compatible = "st,stm32h7-uart"; reg = <0x4000e000 0x400>; @@ -886,6 +899,21 @@ status = "disabled"; }; + ipcc: mailbox@4c001000 { + compatible = "st,stm32mp1-ipcc"; + #mbox-cells = <1>; + reg = <0x4c001000 0x400>; + st,proc-id = <0>; + interrupts-extended = + <&intc GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <&exti 61 1>; + interrupt-names = "rx", "tx", "wakeup"; + clocks = <&rcc IPCC>; + wakeup-source; + status = "disabled"; + }; + rcc: rcc@50000000 { compatible = "st,stm32mp1-rcc", "syscon"; reg = <0x50000000 0x1000>; @@ -903,6 +931,7 @@ syscfg: syscon@50020000 { compatible = "st,stm32mp157-syscfg", "syscon"; reg = <0x50020000 0x400>; + clocks = <&rcc SYSCFG>; }; lptimer2: timer@50021000 { @@ -1050,6 +1079,20 @@ status = "disabled"; }; + sdmmc1: sdmmc@58005000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x10153180>; + reg = <0x58005000 0x1000>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&rcc SDMMC1_K>; + clock-names = "apb_pclk"; + resets = <&rcc SDMMC1_R>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <120000000>; + }; + crc1: crc@58009000 { compatible = "st,stm32f7-crc"; reg = <0x58009000 0x400>; @@ -1199,6 +1242,19 @@ status = "disabled"; }; + bsec: nvmem@5c005000 { + compatible = "st,stm32mp15-bsec"; + reg = <0x5c005000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ts_cal1: calib@5c { + reg = <0x5c 0x2>; + }; + ts_cal2: calib@5e { + reg = <0x5e 0x2>; + }; + }; + i2c6: i2c@5c009000 { compatible = "st,stm32f7-i2c"; reg = <0x5c009000 0x400>; |