diff options
Diffstat (limited to 'arch/arm/boot')
-rw-r--r-- | arch/arm/boot/dts/imx6q-tbs2910.dts | 7 | ||||
-rw-r--r-- | arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi | 6 | ||||
-rw-r--r-- | arch/arm/boot/dts/imx6qdl-sr-som.dtsi | 12 | ||||
-rw-r--r-- | arch/arm/boot/dts/imx7d-flex-concentrator.dts | 1 | ||||
-rw-r--r-- | arch/arm/boot/dts/ste-db8500.dtsi | 38 | ||||
-rw-r--r-- | arch/arm/boot/dts/ste-db8520.dtsi | 38 | ||||
-rw-r--r-- | arch/arm/boot/dts/ste-db9500.dtsi | 35 | ||||
-rw-r--r-- | arch/arm/boot/dts/ste-snowball.dts | 2 |
9 files changed, 134 insertions, 7 deletions
diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts index 861e05d53157..343364d3e4f7 100644 --- a/arch/arm/boot/dts/imx6q-tbs2910.dts +++ b/arch/arm/boot/dts/imx6q-tbs2910.dts @@ -16,6 +16,13 @@ stdout-path = &uart1; }; + aliases { + mmc0 = &usdhc2; + mmc1 = &usdhc3; + mmc2 = &usdhc4; + /delete-property/ mmc3; + }; + memory@10000000 { device_type = "memory"; reg = <0x10000000 0x80000000>; diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 736074f1c3ef..959d8ac2e393 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -418,7 +418,7 @@ /* VDD_AUD_1P8: Audio codec */ reg_aud_1p8v: ldo3 { - regulator-name = "vdd1p8"; + regulator-name = "vdd1p8a"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-boot-on; diff --git a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi index d6df598bd1c2..b167b33bd108 100644 --- a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi @@ -137,7 +137,7 @@ lcd_backlight: lcd-backlight { compatible = "pwm-backlight"; - pwms = <&pwm4 0 5000000>; + pwms = <&pwm4 0 5000000 0>; pwm-names = "LCD_BKLT_PWM"; brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; @@ -167,7 +167,7 @@ i2c-gpio,delay-us = <2>; /* ~100 kHz */ #address-cells = <1>; #size-cells = <0>; - status = "disabld"; + status = "disabled"; }; i2c_cam: i2c-gpio-cam { @@ -179,7 +179,7 @@ i2c-gpio,delay-us = <2>; /* ~100 kHz */ #address-cells = <1>; #size-cells = <0>; - status = "disabld"; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi index b06577808ff4..7e4e5fd0143a 100644 --- a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi @@ -53,7 +53,6 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_microsom_enet_ar8035>; - phy-handle = <&phy>; phy-mode = "rgmii-id"; phy-reset-duration = <2>; phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; @@ -63,10 +62,19 @@ #address-cells = <1>; #size-cells = <0>; - phy: ethernet-phy@0 { + /* + * The PHY can appear at either address 0 or 4 due to the + * configuration (LED) pin not being pulled sufficiently. + */ + ethernet-phy@0 { reg = <0>; qca,clk-out-frequency = <125000000>; }; + + ethernet-phy@4 { + reg = <4>; + qca,clk-out-frequency = <125000000>; + }; }; }; diff --git a/arch/arm/boot/dts/imx7d-flex-concentrator.dts b/arch/arm/boot/dts/imx7d-flex-concentrator.dts index 84b095279e65..bd6b5285aa8d 100644 --- a/arch/arm/boot/dts/imx7d-flex-concentrator.dts +++ b/arch/arm/boot/dts/imx7d-flex-concentrator.dts @@ -115,6 +115,7 @@ compatible = "nxp,pcf2127"; reg = <0>; spi-max-frequency = <2000000>; + reset-source; }; }; diff --git a/arch/arm/boot/dts/ste-db8500.dtsi b/arch/arm/boot/dts/ste-db8500.dtsi index d309fad32229..344d29853bf7 100644 --- a/arch/arm/boot/dts/ste-db8500.dtsi +++ b/arch/arm/boot/dts/ste-db8500.dtsi @@ -12,4 +12,42 @@ 200000 0>; }; }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* Modem trace memory */ + ram@06000000 { + reg = <0x06000000 0x00f00000>; + no-map; + }; + + /* Modem shared memory */ + ram@06f00000 { + reg = <0x06f00000 0x00100000>; + no-map; + }; + + /* Modem private memory */ + ram@07000000 { + reg = <0x07000000 0x01000000>; + no-map; + }; + + /* + * Initial Secure Software ISSW memory + * + * This is probably only used if the kernel tries + * to actually call into trustzone to run secure + * applications, which the mainline kernel probably + * will not do on this old chipset. But you can never + * be too careful, so reserve this memory anyway. + */ + ram@17f00000 { + reg = <0x17f00000 0x00100000>; + no-map; + }; + }; }; diff --git a/arch/arm/boot/dts/ste-db8520.dtsi b/arch/arm/boot/dts/ste-db8520.dtsi index 48bd8728ae27..287804e9e183 100644 --- a/arch/arm/boot/dts/ste-db8520.dtsi +++ b/arch/arm/boot/dts/ste-db8520.dtsi @@ -12,4 +12,42 @@ 200000 0>; }; }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* Modem trace memory */ + ram@06000000 { + reg = <0x06000000 0x00f00000>; + no-map; + }; + + /* Modem shared memory */ + ram@06f00000 { + reg = <0x06f00000 0x00100000>; + no-map; + }; + + /* Modem private memory */ + ram@07000000 { + reg = <0x07000000 0x01000000>; + no-map; + }; + + /* + * Initial Secure Software ISSW memory + * + * This is probably only used if the kernel tries + * to actually call into trustzone to run secure + * applications, which the mainline kernel probably + * will not do on this old chipset. But you can never + * be too careful, so reserve this memory anyway. + */ + ram@17f00000 { + reg = <0x17f00000 0x00100000>; + no-map; + }; + }; }; diff --git a/arch/arm/boot/dts/ste-db9500.dtsi b/arch/arm/boot/dts/ste-db9500.dtsi new file mode 100644 index 000000000000..0afff703191c --- /dev/null +++ b/arch/arm/boot/dts/ste-db9500.dtsi @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "ste-dbx5x0.dtsi" + +/ { + cpus { + cpu@300 { + /* cpufreq controls */ + operating-points = <1152000 0 + 800000 0 + 400000 0 + 200000 0>; + }; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* + * Initial Secure Software ISSW memory + * + * This is probably only used if the kernel tries + * to actually call into trustzone to run secure + * applications, which the mainline kernel probably + * will not do on this old chipset. But you can never + * be too careful, so reserve this memory anyway. + */ + ram@17f00000 { + reg = <0x17f00000 0x00100000>; + no-map; + }; + }; +}; diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index be90e73c923e..27d8a07718a0 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -4,7 +4,7 @@ */ /dts-v1/; -#include "ste-db8500.dtsi" +#include "ste-db9500.dtsi" #include "ste-href-ab8500.dtsi" #include "ste-href-family-pinctrl.dtsi" |