diff options
Diffstat (limited to 'arch/arm/boot')
52 files changed, 2437 insertions, 1227 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index a384cce5c31d..86217db2937a 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -307,9 +307,11 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-wandboard.dtb \ imx6q-wandboard-revb1.dtb dtb-$(CONFIG_SOC_IMX6SL) += \ - imx6sl-evk.dtb + imx6sl-evk.dtb \ + imx6sl-warp.dtb dtb-$(CONFIG_SOC_IMX6SX) += \ imx6sx-sabreauto.dtb \ + imx6sx-sdb-reva.dtb \ imx6sx-sdb.dtb dtb-$(CONFIG_SOC_LS1021A) += \ ls1021a-qds.dtb \ diff --git a/arch/arm/boot/dts/am33xx-clocks.dtsi b/arch/arm/boot/dts/am33xx-clocks.dtsi index 071b56aa0c7e..afb4b3a7bab4 100644 --- a/arch/arm/boot/dts/am33xx-clocks.dtsi +++ b/arch/arm/boot/dts/am33xx-clocks.dtsi @@ -7,7 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -&scrm_clocks { +&scm_clocks { sys_clkin_ck: sys_clkin_ck { #clock-cells = <0>; compatible = "ti,mux-clock"; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index acd37057bca9..21fcc440fc1a 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -83,20 +83,6 @@ }; }; - am33xx_control_module: control_module@4a002000 { - compatible = "syscon"; - reg = <0x44e10000 0x7fc>; - }; - - am33xx_pinmux: pinmux@44e10800 { - compatible = "pinctrl-single"; - reg = <0x44e10800 0x0238>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0x7f>; - }; - /* * XXX: Use a flat representation of the AM33XX interconnect. * The real AM33XX interconnect network is quite complex. Since @@ -111,37 +97,58 @@ ranges; ti,hwmods = "l3_main"; - prcm: prcm@44e00000 { - compatible = "ti,am3-prcm"; - reg = <0x44e00000 0x4000>; - - prcm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; + l4_wkup: l4_wkup@44c00000 { + compatible = "ti,am3-l4-wkup", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x44c00000 0x280000>; - prcm_clockdomains: clockdomains { - }; - }; + prcm: prcm@200000 { + compatible = "ti,am3-prcm"; + reg = <0x200000 0x4000>; - scrm: scrm@44e10000 { - compatible = "ti,am3-scrm"; - reg = <0x44e10000 0x2000>; + prcm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; - scrm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; + prcm_clockdomains: clockdomains { + }; }; - scrm_clockdomains: clockdomains { + scm: scm@210000 { + compatible = "ti,am3-scm", "simple-bus"; + reg = <0x210000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x210000 0x2000>; + + am33xx_pinmux: pinmux@800 { + compatible = "pinctrl-single"; + reg = <0x800 0x238>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x7f>; + }; + + scm_conf: scm_conf@0 { + compatible = "syscon"; + reg = <0x0 0x800>; + #address-cells = <1>; + #size-cells = <1>; + + scm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + scm_clockdomains: clockdomains { + }; }; }; - cm: syscon@44e10000 { - compatible = "ti,am33xx-controlmodule", "syscon"; - reg = <0x44e10000 0x800>; - }; - intc: interrupt-controller@48200000 { compatible = "ti,am33xx-intc"; interrupt-controller; @@ -350,7 +357,7 @@ reg = <0x481cc000 0x2000>; clocks = <&dcan0_fck>; clock-names = "fck"; - syscon-raminit = <&am33xx_control_module 0x644 0>; + syscon-raminit = <&scm_conf 0x644 0>; interrupts = <52>; status = "disabled"; }; @@ -361,7 +368,7 @@ reg = <0x481d0000 0x2000>; clocks = <&dcan1_fck>; clock-names = "fck"; - syscon-raminit = <&am33xx_control_module 0x644 1>; + syscon-raminit = <&scm_conf 0x644 1>; interrupts = <55>; status = "disabled"; }; @@ -720,7 +727,7 @@ */ interrupts = <40 41 42 43>; ranges; - syscon = <&cm>; + syscon = <&scm_conf>; status = "disabled"; davinci_mdio: mdio@4a101000 { diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi index c90724bded10..f164dce08755 100644 --- a/arch/arm/boot/dts/am3517.dtsi +++ b/arch/arm/boot/dts/am3517.dtsi @@ -31,7 +31,7 @@ status = "disabled"; reg = <0x5c000000 0x30000>; interrupts = <67 68 69 70>; - syscon = <&omap3_scm_general>; + syscon = <&scm_conf>; ti,davinci-ctrl-reg-offset = <0x10000>; ti,davinci-ctrl-mod-reg-offset = <0>; ti,davinci-ctrl-ram-offset = <0x20000>; diff --git a/arch/arm/boot/dts/am35xx-clocks.dtsi b/arch/arm/boot/dts/am35xx-clocks.dtsi index df489d310b50..518b8fde88b0 100644 --- a/arch/arm/boot/dts/am35xx-clocks.dtsi +++ b/arch/arm/boot/dts/am35xx-clocks.dtsi @@ -7,7 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -&scrm_clocks { +&scm_clocks { emac_ick: emac_ick { #clock-cells = <0>; compatible = "ti,am35xx-gate-clock"; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 1b7bda8c14b1..c80a3e233792 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -66,22 +66,6 @@ cache-level = <2>; }; - am43xx_control_module: control_module@4a002000 { - compatible = "syscon"; - reg = <0x44e10000 0x7f4>; - }; - - am43xx_pinmux: pinmux@44e10800 { - compatible = "ti,am437-padconf", "pinctrl-single"; - reg = <0x44e10800 0x31c>; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0xffffffff>; - }; - ocp { compatible = "ti,am4372-l3-noc", "simple-bus"; #address-cells = <1>; @@ -93,29 +77,58 @@ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - prcm: prcm@44df0000 { - compatible = "ti,am4-prcm"; - reg = <0x44df0000 0x11000>; - - prcm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; + l4_wkup: l4_wkup@44c00000 { + compatible = "ti,am4-l4-wkup", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x44c00000 0x287000>; - prcm_clockdomains: clockdomains { - }; - }; + prcm: prcm@1f0000 { + compatible = "ti,am4-prcm"; + reg = <0x1f0000 0x11000>; - scrm: scrm@44e10000 { - compatible = "ti,am4-scrm"; - reg = <0x44e10000 0x2000>; + prcm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; - scrm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; + prcm_clockdomains: clockdomains { + }; }; - scrm_clockdomains: clockdomains { + scm: scm@210000 { + compatible = "ti,am4-scm", "simple-bus"; + reg = <0x210000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x210000 0x4000>; + + am43xx_pinmux: pinmux@800 { + compatible = "ti,am437-padconf", + "pinctrl-single"; + reg = <0x800 0x31c>; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + scm_conf: scm_conf@0 { + compatible = "syscon"; + reg = <0x0 0x800>; + #address-cells = <1>; + #size-cells = <1>; + + scm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + scm_clockdomains: clockdomains { + }; }; }; @@ -942,7 +955,7 @@ clocks = <&dcan0_fck>; clock-names = "fck"; reg = <0x481cc000 0x2000>; - syscon-raminit = <&am43xx_control_module 0x644 0>; + syscon-raminit = <&scm_conf 0x644 0>; interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -953,7 +966,7 @@ clocks = <&dcan1_fck>; clock-names = "fck"; reg = <0x481d0000 0x2000>; - syscon-raminit = <&am43xx_control_module 0x644 1>; + syscon-raminit = <&scm_conf 0x644 1>; interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 1d7109196872..795d68af6df9 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -69,7 +69,48 @@ }; }; - am43xx_pinmux: pinmux@44e10800 { + matrix_keypad: matrix_keypad@0 { + compatible = "gpio-matrix-keypad"; + debounce-delay-ms = <5>; + col-scan-delay-us = <2>; + + row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH /* Bank0, pin12 */ + &gpio0 13 GPIO_ACTIVE_HIGH /* Bank0, pin13 */ + &gpio0 14 GPIO_ACTIVE_HIGH /* Bank0, pin14 */ + &gpio0 15 GPIO_ACTIVE_HIGH>; /* Bank0, pin15 */ + + col-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH /* Bank3, pin9 */ + &gpio3 10 GPIO_ACTIVE_HIGH /* Bank3, pin10 */ + &gpio2 18 GPIO_ACTIVE_HIGH /* Bank2, pin18 */ + &gpio2 19 GPIO_ACTIVE_HIGH>; /* Bank2, pin19 */ + + linux,keymap = <0x00000201 /* P1 */ + 0x01000204 /* P4 */ + 0x02000207 /* P7 */ + 0x0300020a /* NUMERIC_STAR */ + 0x00010202 /* P2 */ + 0x01010205 /* P5 */ + 0x02010208 /* P8 */ + 0x03010200 /* P0 */ + 0x00020203 /* P3 */ + 0x01020206 /* P6 */ + 0x02020209 /* P9 */ + 0x0302020b /* NUMERIC_POUND */ + 0x00030067 /* UP */ + 0x0103006a /* RIGHT */ + 0x0203006c /* DOWN */ + 0x03030069>; /* LEFT */ + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 51 53 56 62 75 101 152 255>; + default-brightness-level = <8>; + }; +}; + +&am43xx_pinmux { cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ @@ -279,47 +320,6 @@ 0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) >; }; - }; - - matrix_keypad: matrix_keypad@0 { - compatible = "gpio-matrix-keypad"; - debounce-delay-ms = <5>; - col-scan-delay-us = <2>; - - row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH /* Bank0, pin12 */ - &gpio0 13 GPIO_ACTIVE_HIGH /* Bank0, pin13 */ - &gpio0 14 GPIO_ACTIVE_HIGH /* Bank0, pin14 */ - &gpio0 15 GPIO_ACTIVE_HIGH>; /* Bank0, pin15 */ - - col-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH /* Bank3, pin9 */ - &gpio3 10 GPIO_ACTIVE_HIGH /* Bank3, pin10 */ - &gpio2 18 GPIO_ACTIVE_HIGH /* Bank2, pin18 */ - &gpio2 19 GPIO_ACTIVE_HIGH>; /* Bank2, pin19 */ - - linux,keymap = <0x00000201 /* P1 */ - 0x01000204 /* P4 */ - 0x02000207 /* P7 */ - 0x0300020a /* NUMERIC_STAR */ - 0x00010202 /* P2 */ - 0x01010205 /* P5 */ - 0x02010208 /* P8 */ - 0x03010200 /* P0 */ - 0x00020203 /* P3 */ - 0x01020206 /* P6 */ - 0x02020209 /* P9 */ - 0x0302020b /* NUMERIC_POUND */ - 0x00030067 /* UP */ - 0x0103006a /* RIGHT */ - 0x0203006c /* DOWN */ - 0x03030069>; /* LEFT */ - }; - - backlight { - compatible = "pwm-backlight"; - pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>; - brightness-levels = <0 51 53 56 62 75 101 152 255>; - default-brightness-level = <8>; - }; }; &mmc1 { diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi index cfb49686ab6a..d0c0dfa4ec48 100644 --- a/arch/arm/boot/dts/am43xx-clocks.dtsi +++ b/arch/arm/boot/dts/am43xx-clocks.dtsi @@ -7,7 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -&scrm_clocks { +&scm_clocks { sys_clkin_ck: sys_clkin_ck { #clock-cells = <0>; compatible = "ti,mux-clock"; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 082882c616e8..5332b57b4950 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -102,17 +102,101 @@ interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - prm: prm@4ae06000 { - compatible = "ti,dra7-prm"; - reg = <0x4ae06000 0x3000>; - interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + l4_cfg: l4@4a000000 { + compatible = "ti,dra7-l4-cfg", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4a000000 0x22c000>; - prm_clocks: clocks { + scm: scm@2000 { + compatible = "ti,dra7-scm-core", "simple-bus"; + reg = <0x2000 0x2000>; #address-cells = <1>; - #size-cells = <0>; + #size-cells = <1>; + ranges = <0 0x2000 0x2000>; + + scm_conf: scm_conf@0 { + compatible = "syscon"; + reg = <0x0 0x1400>; + #address-cells = <1>; + #size-cells = <1>; + + pbias_regulator: pbias_regulator { + compatible = "ti,pbias-omap"; + reg = <0xe00 0x4>; + syscon = <&scm_conf>; + pbias_mmc_reg: pbias_mmc_omap5 { + regulator-name = "pbias_mmc_omap5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + }; + }; + + dra7_pmx_core: pinmux@1400 { + compatible = "ti,dra7-padconf", + "pinctrl-single"; + reg = <0x1400 0x0464>; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x3fffffff>; + }; + }; + + cm_core_aon: cm_core_aon@5000 { + compatible = "ti,dra7-cm-core-aon"; + reg = <0x5000 0x2000>; + + cm_core_aon_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + cm_core_aon_clockdomains: clockdomains { + }; }; - prm_clockdomains: clockdomains { + cm_core: cm_core@8000 { + compatible = "ti,dra7-cm-core"; + reg = <0x8000 0x3000>; + + cm_core_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + cm_core_clockdomains: clockdomains { + }; + }; + }; + + l4_wkup: l4@4ae00000 { + compatible = "ti,dra7-l4-wkup", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4ae00000 0x3f000>; + + counter32k: counter@4000 { + compatible = "ti,omap-counter32k"; + reg = <0x4000 0x40>; + ti,hwmods = "counter_32k"; + }; + + prm: prm@6000 { + compatible = "ti,dra7-prm"; + reg = <0x6000 0x3000>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + + prm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + prm_clockdomains: clockdomains { + }; }; }; @@ -197,38 +281,6 @@ #thermal-sensor-cells = <1>; }; - cm_core_aon: cm_core_aon@4a005000 { - compatible = "ti,dra7-cm-core-aon"; - reg = <0x4a005000 0x2000>; - - cm_core_aon_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - cm_core_aon_clockdomains: clockdomains { - }; - }; - - cm_core: cm_core@4a008000 { - compatible = "ti,dra7-cm-core"; - reg = <0x4a008000 0x3000>; - - cm_core_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - cm_core_clockdomains: clockdomains { - }; - }; - - counter32k: counter@4ae04000 { - compatible = "ti,omap-counter32k"; - reg = <0x4ae04000 0x40>; - ti,hwmods = "counter_32k"; - }; - dra7_ctrl_core: ctrl_core@4a002000 { compatible = "syscon"; reg = <0x4a002000 0x6d0>; @@ -239,28 +291,6 @@ reg = <0x4a002e00 0x7c>; }; - pbias_regulator: pbias_regulator { - compatible = "ti,pbias-omap"; - reg = <0 0x4>; - syscon = <&dra7_ctrl_general>; - pbias_mmc_reg: pbias_mmc_omap5 { - regulator-name = "pbias_mmc_omap5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - }; - }; - - dra7_pmx_core: pinmux@4a003400 { - compatible = "ti,dra7-padconf", "pinctrl-single"; - reg = <0x4a003400 0x0464>; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0x3fffffff>; - }; - sdma: dma-controller@4a056000 { compatible = "ti,omap4430-sdma"; reg = <0x4a056000 0x1000>; @@ -1424,7 +1454,7 @@ compatible = "ti,dra7-d_can"; ti,hwmods = "dcan1"; reg = <0x4ae3c000 0x2000>; - syscon-raminit = <&dra7_ctrl_core 0x558 0>; + syscon-raminit = <&scm_conf 0x558 0>; interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; clocks = <&dcan1_sys_clk_mux>; status = "disabled"; @@ -1434,7 +1464,7 @@ compatible = "ti,dra7-d_can"; ti,hwmods = "dcan2"; reg = <0x48480000 0x2000>; - syscon-raminit = <&dra7_ctrl_core 0x558 1>; + syscon-raminit = <&scm_conf 0x558 1>; interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; clocks = <&sys_clkin1>; status = "disabled"; diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts index 9c21b1583762..dd45e6971bc3 100644 --- a/arch/arm/boot/dts/imx25-pdk.dts +++ b/arch/arm/boot/dts/imx25-pdk.dts @@ -75,6 +75,27 @@ mux-int-port = <1>; mux-ext-port = <4>; }; + + wvga: display { + model = "CLAA057VC01CW"; + bits-per-pixel = <16>; + fsl,pcr = <0xfa208b80>; + bus-width = <18>; + native-mode = <&wvga_timings>; + display-timings { + wvga_timings: 640x480 { + hactive = <640>; + vactive = <480>; + hback-porch = <45>; + hfront-porch = <114>; + hsync-len = <1>; + vback-porch = <33>; + vfront-porch = <11>; + vsync-len = <1>; + clock-frequency = <25200000>; + }; + }; + }; }; &audmux { @@ -190,6 +211,33 @@ >; }; + pinctrl_lcd: lcdgrp { + fsl,pins = < + MX25_PAD_LD0__LD0 0xe0 + MX25_PAD_LD1__LD1 0xe0 + MX25_PAD_LD2__LD2 0xe0 + MX25_PAD_LD3__LD3 0xe0 + MX25_PAD_LD4__LD4 0xe0 + MX25_PAD_LD5__LD5 0xe0 + MX25_PAD_LD6__LD6 0xe0 + MX25_PAD_LD7__LD7 0xe0 + MX25_PAD_LD8__LD8 0xe0 + MX25_PAD_LD9__LD9 0xe0 + MX25_PAD_LD10__LD10 0xe0 + MX25_PAD_LD11__LD11 0xe0 + MX25_PAD_LD12__LD12 0xe0 + MX25_PAD_LD13__LD13 0xe0 + MX25_PAD_LD14__LD14 0xe0 + MX25_PAD_LD15__LD15 0xe0 + MX25_PAD_GPIO_E__LD16 0xe0 + MX25_PAD_GPIO_F__LD17 0xe0 + MX25_PAD_HSYNC__HSYNC 0xe0 + MX25_PAD_VSYNC__VSYNC 0xe0 + MX25_PAD_LSCLK__LSCLK 0xe0 + MX25_PAD_OE_ACD__OE_ACD 0xe0 + MX25_PAD_CONTRAST__CONTRAST 0xe0 + >; + }; pinctrl_uart1: uart1grp { fsl,pins = < @@ -202,6 +250,16 @@ }; }; +&lcdc { + display = <&wvga>; + fsl,lpccr = <0x00a903ff>; + fsl,lscr1 = <0x00120300>; + fsl,dmacr = <0x00020010>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd>; + status = "okay"; +}; + &nfc { nand-on-flash-bbt; status = "okay"; diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h index 88eebb15da6a..7c4b9f2f9aad 100644 --- a/arch/arm/boot/dts/imx25-pinfunc.h +++ b/arch/arm/boot/dts/imx25-pinfunc.h @@ -17,48 +17,69 @@ * <mux_reg conf_reg input_reg mux_mode input_val> */ +#define MX25_PAD_TDO__TDO 0x000 0x3e8 0x000 0x00 0x000 + #define MX25_PAD_A10__A10 0x008 0x000 0x000 0x00 0x000 #define MX25_PAD_A10__GPIO_4_0 0x008 0x000 0x000 0x05 0x000 #define MX25_PAD_A13__A13 0x00c 0x22C 0x000 0x00 0x000 #define MX25_PAD_A13__GPIO_4_1 0x00c 0x22C 0x000 0x05 0x000 +#define MX25_PAD_A13__LCDC_CLS 0x00c 0x22C 0x000 0x07 0x000 #define MX25_PAD_A14__A14 0x010 0x230 0x000 0x10 0x000 #define MX25_PAD_A14__GPIO_2_0 0x010 0x230 0x000 0x15 0x000 +#define MX25_PAD_A14__SIM1_CLK1 0x010 0x230 0x000 0x16 0x000 +#define MX25_PAD_A14__LCDC_SPL 0x010 0x230 0x000 0x17 0x000 #define MX25_PAD_A15__A15 0x014 0x234 0x000 0x10 0x000 #define MX25_PAD_A15__GPIO_2_1 0x014 0x234 0x000 0x15 0x000 +#define MX25_PAD_A15__SIM1_RST1 0x014 0x234 0x000 0x16 0x000 +#define MX25_PAD_A15__LCDC_PS 0x014 0x234 0x000 0x17 0x000 #define MX25_PAD_A16__A16 0x018 0x000 0x000 0x10 0x000 #define MX25_PAD_A16__GPIO_2_2 0x018 0x000 0x000 0x15 0x000 +#define MX25_PAD_A16__SIM1_VEN1 0x018 0x000 0x000 0x16 0x000 +#define MX25_PAD_A16__LCDC_REV 0x018 0x000 0x000 0x17 0x000 #define MX25_PAD_A17__A17 0x01c 0x238 0x000 0x10 0x000 #define MX25_PAD_A17__GPIO_2_3 0x01c 0x238 0x000 0x15 0x000 +#define MX25_PAD_A17__SIM1_TX 0x01c 0x238 0x554 0x16 0x000 +#define MX25_PAD_A17__FEC_TX_ERR 0x01c 0x238 0x000 0x17 0x000 #define MX25_PAD_A18__A18 0x020 0x23c 0x000 0x10 0x000 #define MX25_PAD_A18__GPIO_2_4 0x020 0x23c 0x000 0x15 0x000 +#define MX25_PAD_A18__SIM1_PD1 0x020 0x23c 0x550 0x16 0x000 #define MX25_PAD_A18__FEC_COL 0x020 0x23c 0x504 0x17 0x000 #define MX25_PAD_A19__A19 0x024 0x240 0x000 0x10 0x000 -#define MX25_PAD_A19__FEC_RX_ER 0x024 0x240 0x518 0x17 0x000 #define MX25_PAD_A19__GPIO_2_5 0x024 0x240 0x000 0x15 0x000 +#define MX25_PAD_A19__SIM1_RX1 0x024 0x240 0x54c 0x16 0x000 +#define MX25_PAD_A19__FEC_RX_ERR 0x024 0x240 0x518 0x17 0x000 #define MX25_PAD_A20__A20 0x028 0x244 0x000 0x10 0x000 #define MX25_PAD_A20__GPIO_2_6 0x028 0x244 0x000 0x15 0x000 +#define MX25_PAD_A20__SIM2_CLK1 0x028 0x244 0x000 0x16 0x000 #define MX25_PAD_A20__FEC_RDATA2 0x028 0x244 0x50c 0x17 0x000 #define MX25_PAD_A21__A21 0x02c 0x248 0x000 0x10 0x000 #define MX25_PAD_A21__GPIO_2_7 0x02c 0x248 0x000 0x15 0x000 +#define MX25_PAD_A21__SIM2_RST1 0x02c 0x248 0x000 0x16 0x000 #define MX25_PAD_A21__FEC_RDATA3 0x02c 0x248 0x510 0x17 0x000 #define MX25_PAD_A22__A22 0x030 0x000 0x000 0x10 0x000 #define MX25_PAD_A22__GPIO_2_8 0x030 0x000 0x000 0x15 0x000 +#define MX25_PAD_A22__FEC_TDATA2 0x030 0x000 0x000 0x17 0x000 +#define MX25_PAD_A22__SIM2_VEN1 0x030 0x000 0x000 0x16 0x000 +#define MX25_PAD_A22__FEC_TDATA2 0x030 0x000 0x000 0x17 0x000 #define MX25_PAD_A23__A23 0x034 0x24c 0x000 0x10 0x000 #define MX25_PAD_A23__GPIO_2_9 0x034 0x24c 0x000 0x15 0x000 +#define MX25_PAD_A23__SIM2_TX1 0x034 0x24c 0x560 0x16 0x000 +#define MX25_PAD_A23__FEC_TDATA3 0x034 0x24c 0x000 0x17 0x000 #define MX25_PAD_A24__A24 0x038 0x250 0x000 0x10 0x000 #define MX25_PAD_A24__GPIO_2_10 0x038 0x250 0x000 0x15 0x000 +#define MX25_PAD_A24__SIM2_PD1 0x038 0x250 0x55c 0x16 0x000 #define MX25_PAD_A24__FEC_RX_CLK 0x038 0x250 0x514 0x17 0x000 #define MX25_PAD_A25__A25 0x03c 0x254 0x000 0x10 0x000 @@ -133,20 +154,25 @@ #define MX25_PAD_D15__D15 0x088 0x280 0x000 0x00 0x000 #define MX25_PAD_D15__LD16 0x088 0x280 0x000 0x01 0x000 #define MX25_PAD_D15__GPIO_4_5 0x088 0x280 0x000 0x05 0x000 +#define MX25_PAD_D15__SDHC1_DAT7 0x088 0x280 0x4d8 0x06 0x000 #define MX25_PAD_D14__D14 0x08c 0x284 0x000 0x00 0x000 #define MX25_PAD_D14__LD17 0x08c 0x284 0x000 0x01 0x000 #define MX25_PAD_D14__GPIO_4_6 0x08c 0x284 0x000 0x05 0x000 +#define MX25_PAD_D14__SDHC1_DAT6 0x08c 0x284 0x4d4 0x06 0x000 #define MX25_PAD_D13__D13 0x090 0x288 0x000 0x00 0x000 #define MX25_PAD_D13__LD18 0x090 0x288 0x000 0x01 0x000 #define MX25_PAD_D13__GPIO_4_7 0x090 0x288 0x000 0x05 0x000 +#define MX25_PAD_D13__SDHC1_DAT5 0x090 0x288 0x4d0 0x06 0x000 #define MX25_PAD_D12__D12 0x094 0x28c 0x000 0x00 0x000 #define MX25_PAD_D12__GPIO_4_8 0x094 0x28c 0x000 0x05 0x000 +#define MX25_PAD_D12__SDHC1_DAT4 0x094 0x28c 0x4cc 0x06 0x000 #define MX25_PAD_D11__D11 0x098 0x290 0x000 0x00 0x000 #define MX25_PAD_D11__GPIO_4_9 0x098 0x290 0x000 0x05 0x000 +#define MX25_PAD_D11__USBOTG_PWR 0x098 0x290 0x000 0x06 0x000 #define MX25_PAD_D10__D10 0x09c 0x294 0x000 0x00 0x000 #define MX25_PAD_D10__GPIO_4_10 0x09c 0x294 0x000 0x05 0x000 @@ -212,26 +238,33 @@ #define MX25_PAD_LD8__LD8 0x0e8 0x2e0 0x000 0x10 0x000 #define MX25_PAD_LD8__FEC_TX_ERR 0x0e8 0x2e0 0x000 0x15 0x000 +#define MX25_PAD_LD8__SDHC2_CMD 0x0e8 0x2e0 0x4e0 0x06 0x000 #define MX25_PAD_LD9__LD9 0x0ec 0x2e4 0x000 0x10 0x000 #define MX25_PAD_LD9__FEC_COL 0x0ec 0x2e4 0x504 0x15 0x001 +#define MX25_PAD_LD9__SDHC2_CLK 0x0ec 0x2e4 0x4dc 0x06 0x000 #define MX25_PAD_LD10__LD10 0x0f0 0x2e8 0x000 0x10 0x000 -#define MX25_PAD_LD10__FEC_RX_ER 0x0f0 0x2e8 0x518 0x15 0x001 +#define MX25_PAD_LD10__FEC_RX_ERR 0x0f0 0x2e8 0x518 0x15 0x001 #define MX25_PAD_LD11__LD11 0x0f4 0x2ec 0x000 0x10 0x000 #define MX25_PAD_LD11__FEC_RDATA2 0x0f4 0x2ec 0x50c 0x15 0x001 +#define MX25_PAD_LD11__SDHC2_DAT1 0x0f4 0x2ec 0x4e8 0x06 0x000 #define MX25_PAD_LD12__LD12 0x0f8 0x2f0 0x000 0x10 0x000 +#define MX25_PAD_LD12__CSPI2_MOSI 0x0f8 0x2f0 0x4a0 0x02 0x000 #define MX25_PAD_LD12__FEC_RDATA3 0x0f8 0x2f0 0x510 0x15 0x001 #define MX25_PAD_LD13__LD13 0x0fc 0x2f4 0x000 0x10 0x000 +#define MX25_PAD_LD13__CSPI2_MISO 0x0fc 0x2f4 0x49c 0x02 0x000 #define MX25_PAD_LD13__FEC_TDATA2 0x0fc 0x2f4 0x000 0x15 0x000 #define MX25_PAD_LD14__LD14 0x100 0x2f8 0x000 0x10 0x000 +#define MX25_PAD_LD14__CSPI2_SCLK 0x100 0x2f8 0x494 0x02 0x000 #define MX25_PAD_LD14__FEC_TDATA3 0x100 0x2f8 0x000 0x15 0x000 #define MX25_PAD_LD15__LD15 0x104 0x2fc 0x000 0x10 0x000 +#define MX25_PAD_LD15__CSPI2_RDY 0x104 0x2fc 0x498 0x02 0x000 #define MX25_PAD_LD15__FEC_RX_CLK 0x104 0x2fc 0x514 0x15 0x001 #define MX25_PAD_HSYNC__HSYNC 0x108 0x300 0x000 0x10 0x000 @@ -244,6 +277,7 @@ #define MX25_PAD_LSCLK__GPIO_1_24 0x110 0x308 0x000 0x15 0x000 #define MX25_PAD_OE_ACD__OE_ACD 0x114 0x30c 0x000 0x10 0x000 +#define MX25_PAD_OE_ACD__CSPI2_SS0 0x114 0x30c 0x4a4 0x02 0x000 #define MX25_PAD_OE_ACD__GPIO_1_25 0x114 0x30c 0x000 0x15 0x000 #define MX25_PAD_CONTRAST__CONTRAST 0x118 0x310 0x000 0x10 0x000 @@ -257,26 +291,31 @@ #define MX25_PAD_CSI_D2__CSI_D2 0x120 0x318 0x000 0x10 0x000 #define MX25_PAD_CSI_D2__UART5_RXD_MUX 0x120 0x318 0x578 0x11 0x001 +#define MX25_PAD_CSI_D2__SIM1_CLK0 0x120 0x318 0x000 0x04 0x000 #define MX25_PAD_CSI_D2__GPIO_1_27 0x120 0x318 0x000 0x15 0x000 #define MX25_PAD_CSI_D2__CSPI3_MOSI 0x120 0x318 0x000 0x17 0x000 #define MX25_PAD_CSI_D3__CSI_D3 0x124 0x31c 0x000 0x10 0x000 #define MX25_PAD_CSI_D3__UART5_TXD_MUX 0x124 0x31c 0x000 0x11 0x000 +#define MX25_PAD_CSI_D3__SIM1_RST0 0x124 0x31c 0x000 0x04 0x000 #define MX25_PAD_CSI_D3__GPIO_1_28 0x124 0x31c 0x000 0x15 0x000 #define MX25_PAD_CSI_D3__CSPI3_MISO 0x124 0x31c 0x4b4 0x17 0x001 #define MX25_PAD_CSI_D4__CSI_D4 0x128 0x320 0x000 0x10 0x000 #define MX25_PAD_CSI_D4__UART5_RTS 0x128 0x320 0x574 0x11 0x001 +#define MX25_PAD_CSI_D4__SIM1_VEN0 0x128 0x320 0x000 0x04 0x000 #define MX25_PAD_CSI_D4__GPIO_1_29 0x128 0x320 0x000 0x15 0x000 #define MX25_PAD_CSI_D4__CSPI3_SCLK 0x128 0x320 0x000 0x17 0x000 #define MX25_PAD_CSI_D5__CSI_D5 0x12c 0x324 0x000 0x10 0x000 -#define MX25_PAD_CSI_D5__UART5_CTS 0x12c 0x324 0x000 0x11 0x001 +#define MX25_PAD_CSI_D5__UART5_CTS 0x12c 0x324 0x000 0x11 0x000 +#define MX25_PAD_CSI_D5__SIM1_TX0 0x12c 0x324 0x000 0x04 0x000 #define MX25_PAD_CSI_D5__GPIO_1_30 0x12c 0x324 0x000 0x15 0x000 #define MX25_PAD_CSI_D5__CSPI3_RDY 0x12c 0x324 0x000 0x17 0x000 #define MX25_PAD_CSI_D6__CSI_D6 0x130 0x328 0x000 0x10 0x000 #define MX25_PAD_CSI_D6__SDHC2_CMD 0x130 0x328 0x4e0 0x12 0x001 +#define MX25_PAD_CSI_D6__SIM1_PD0 0x130 0x328 0x000 0x04 0x000 #define MX25_PAD_CSI_D6__GPIO_1_31 0x130 0x328 0x000 0x15 0x000 #define MX25_PAD_CSI_D7__CSI_D7 0x134 0x32c 0x000 0x10 0x000 @@ -284,32 +323,32 @@ #define MX25_PAD_CSI_D7__GPIO_1_6 0x134 0x32c 0x000 0x15 0x000 #define MX25_PAD_CSI_D8__CSI_D8 0x138 0x330 0x000 0x10 0x000 -#define MX25_PAD_CSI_D8__AUD6_RXC 0x138 0x330 0x000 0x12 0x001 +#define MX25_PAD_CSI_D8__AUD6_RXC 0x138 0x330 0x000 0x12 0x000 #define MX25_PAD_CSI_D8__GPIO_1_7 0x138 0x330 0x000 0x15 0x000 #define MX25_PAD_CSI_D8__CSPI3_SS2 0x138 0x330 0x4c4 0x17 0x000 #define MX25_PAD_CSI_D9__CSI_D9 0x13c 0x334 0x000 0x10 0x000 -#define MX25_PAD_CSI_D9__AUD6_RXFS 0x13c 0x334 0x000 0x12 0x001 +#define MX25_PAD_CSI_D9__AUD6_RXFS 0x13c 0x334 0x000 0x12 0x000 #define MX25_PAD_CSI_D9__GPIO_4_21 0x13c 0x334 0x000 0x15 0x000 #define MX25_PAD_CSI_D9__CSPI3_SS3 0x13c 0x334 0x4c8 0x17 0x000 #define MX25_PAD_CSI_MCLK__CSI_MCLK 0x140 0x338 0x000 0x10 0x000 -#define MX25_PAD_CSI_MCLK__AUD6_TXD 0x140 0x338 0x000 0x11 0x001 +#define MX25_PAD_CSI_MCLK__AUD6_TXD 0x140 0x338 0x000 0x11 0x000 #define MX25_PAD_CSI_MCLK__SDHC2_DAT0 0x140 0x338 0x4e4 0x12 0x001 #define MX25_PAD_CSI_MCLK__GPIO_1_8 0x140 0x338 0x000 0x15 0x000 #define MX25_PAD_CSI_VSYNC__CSI_VSYNC 0x144 0x33c 0x000 0x10 0x000 -#define MX25_PAD_CSI_VSYNC__AUD6_RXD 0x144 0x33c 0x000 0x11 0x001 +#define MX25_PAD_CSI_VSYNC__AUD6_RXD 0x144 0x33c 0x000 0x11 0x000 #define MX25_PAD_CSI_VSYNC__SDHC2_DAT1 0x144 0x33c 0x4e8 0x12 0x001 #define MX25_PAD_CSI_VSYNC__GPIO_1_9 0x144 0x33c 0x000 0x15 0x000 #define MX25_PAD_CSI_HSYNC__CSI_HSYNC 0x148 0x340 0x000 0x10 0x000 -#define MX25_PAD_CSI_HSYNC__AUD6_TXC 0x148 0x340 0x000 0x11 0x001 +#define MX25_PAD_CSI_HSYNC__AUD6_TXC 0x148 0x340 0x000 0x11 0x000 #define MX25_PAD_CSI_HSYNC__SDHC2_DAT2 0x148 0x340 0x4ec 0x12 0x001 #define MX25_PAD_CSI_HSYNC__GPIO_1_10 0x148 0x340 0x000 0x15 0x000 #define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK 0x14c 0x344 0x000 0x10 0x000 -#define MX25_PAD_CSI_PIXCLK__AUD6_TXFS 0x14c 0x344 0x000 0x11 0x001 +#define MX25_PAD_CSI_PIXCLK__AUD6_TXFS 0x14c 0x344 0x000 0x11 0x000 #define MX25_PAD_CSI_PIXCLK__SDHC2_DAT3 0x14c 0x344 0x4f0 0x12 0x001 #define MX25_PAD_CSI_PIXCLK__GPIO_1_11 0x14c 0x344 0x000 0x15 0x000 @@ -369,8 +408,8 @@ #define MX25_PAD_UART2_RTS__CC1 0x188 0x380 0x000 0x13 0x000 #define MX25_PAD_UART2_RTS__GPIO_4_28 0x188 0x380 0x000 0x15 0x000 -#define MX25_PAD_UART2_CTS__FEC_RX_ER 0x18c 0x384 0x518 0x12 0x002 #define MX25_PAD_UART2_CTS__UART2_CTS 0x18c 0x384 0x000 0x10 0x000 +#define MX25_PAD_UART2_CTS__FEC_RX_ERR 0x18c 0x384 0x518 0x12 0x002 #define MX25_PAD_UART2_CTS__GPIO_4_29 0x18c 0x384 0x000 0x15 0x000 #define MX25_PAD_SD1_CMD__SD1_CMD 0x190 0x388 0x000 0x10 0x000 @@ -392,11 +431,11 @@ #define MX25_PAD_SD1_DATA1__GPIO_2_26 0x19c 0x394 0x000 0x15 0x000 #define MX25_PAD_SD1_DATA2__SD1_DATA2 0x1a0 0x398 0x000 0x10 0x000 -#define MX25_PAD_SD1_DATA2__FEC_RX_CLK 0x1a0 0x398 0x514 0x15 0x002 +#define MX25_PAD_SD1_DATA2__FEC_RX_CLK 0x1a0 0x398 0x514 0x12 0x002 #define MX25_PAD_SD1_DATA2__GPIO_2_27 0x1a0 0x398 0x000 0x15 0x000 #define MX25_PAD_SD1_DATA3__SD1_DATA3 0x1a4 0x39c 0x000 0x10 0x000 -#define MX25_PAD_SD1_DATA3__FEC_CRS 0x1a4 0x39c 0x508 0x10 0x002 +#define MX25_PAD_SD1_DATA3__FEC_CRS 0x1a4 0x39c 0x508 0x12 0x002 #define MX25_PAD_SD1_DATA3__GPIO_2_28 0x1a4 0x39c 0x000 0x15 0x000 #define MX25_PAD_KPP_ROW0__KPP_ROW0 0x1a8 0x3a0 0x000 0x10 0x000 @@ -410,7 +449,7 @@ #define MX25_PAD_KPP_ROW2__GPIO_2_31 0x1b0 0x3a8 0x000 0x15 0x000 #define MX25_PAD_KPP_ROW3__KPP_ROW3 0x1b4 0x3ac 0x000 0x10 0x000 -#define MX25_PAD_KPP_ROW3__CSI_LD1 0x1b4 0x3ac 0x48c 0x13 0x002 +#define MX25_PAD_KPP_ROW3__CSI_D1 0x1b4 0x3ac 0x48c 0x13 0x002 #define MX25_PAD_KPP_ROW3__GPIO_3_0 0x1b4 0x3ac 0x000 0x15 0x000 #define MX25_PAD_KPP_COL0__KPP_COL0 0x1b8 0x3b0 0x000 0x10 0x000 @@ -455,9 +494,18 @@ #define MX25_PAD_FEC_RDATA0__GPIO_3_10 0x1dc 0x3d4 0x000 0x15 0x000 #define MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x1e0 0x3d8 0x000 0x10 0x000 +/* + * According to the i.MX25 Reference manual (IMX25RM, Rev. 2, + * 01/2011) this is CAN1_TX but that's wrong. + */ +#define MX25_PAD_FEC_RDATA1__CAN2_TX 0x1e0 0x3d8 0x000 0x14 0x000 #define MX25_PAD_FEC_RDATA1__GPIO_3_11 0x1e0 0x3d8 0x000 0x15 0x000 #define MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x1e4 0x3dc 0x000 0x10 0x000 +/* + * According to the i.MX25 Reference manual (IMX25RM, Rev. 2, + * 01/2011) this is CAN1_RX but that's wrong. + */ #define MX25_PAD_FEC_RX_DV__CAN2_RX 0x1e4 0x3dc 0x484 0x14 0x000 #define MX25_PAD_FEC_RX_DV__GPIO_3_12 0x1e4 0x3dc 0x000 0x15 0x000 @@ -471,30 +519,34 @@ #define MX25_PAD_DE_B__DE_B 0x1f0 0x3ec 0x000 0x10 0x000 #define MX25_PAD_DE_B__GPIO_2_20 0x1f0 0x3ec 0x000 0x15 0x000 -#define MX25_PAD_TDO__TDO 0x000 0x3e8 0x000 0x00 0x000 - #define MX25_PAD_GPIO_A__GPIO_A 0x1f4 0x3f0 0x000 0x10 0x000 #define MX25_PAD_GPIO_A__CAN1_TX 0x1f4 0x3f0 0x000 0x16 0x000 #define MX25_PAD_GPIO_A__USBOTG_PWR 0x1f4 0x3f0 0x000 0x12 0x000 #define MX25_PAD_GPIO_B__GPIO_B 0x1f8 0x3f4 0x000 0x10 0x000 -#define MX25_PAD_GPIO_B__CAN1_RX 0x1f8 0x3f4 0x480 0x16 0x001 #define MX25_PAD_GPIO_B__USBOTG_OC 0x1f8 0x3f4 0x57c 0x12 0x001 +#define MX25_PAD_GPIO_B__CAN1_RX 0x1f8 0x3f4 0x480 0x16 0x001 #define MX25_PAD_GPIO_C__GPIO_C 0x1fc 0x3f8 0x000 0x10 0x000 +#define MX25_PAD_GPIO_C__PWM4_PWMO 0x1fc 0x3f8 0x000 0x11 0x000 +#define MX25_PAD_GPIO_C__I2C2_SCL 0x1fc 0x3f8 0x51c 0x12 0x001 +#define MX25_PAD_GPIO_C__KPP_COL4 0x1fc 0x3f8 0x52c 0x13 0x001 #define MX25_PAD_GPIO_C__CAN2_TX 0x1fc 0x3f8 0x000 0x16 0x000 #define MX25_PAD_GPIO_D__GPIO_D 0x200 0x3fc 0x000 0x10 0x000 +#define MX25_PAD_GPIO_D__I2C2_SDA 0x200 0x3fc 0x520 0x12 0x001 #define MX25_PAD_GPIO_D__CAN2_RX 0x200 0x3fc 0x484 0x16 0x001 #define MX25_PAD_GPIO_E__GPIO_E 0x204 0x400 0x000 0x10 0x000 #define MX25_PAD_GPIO_E__I2C3_CLK 0x204 0x400 0x524 0x11 0x002 #define MX25_PAD_GPIO_E__LD16 0x204 0x400 0x000 0x12 0x000 #define MX25_PAD_GPIO_E__AUD7_TXD 0x204 0x400 0x000 0x14 0x000 +#define MX25_PAD_GPIO_E__UART4_RXD 0x204 0x400 0x570 0x16 0x002 #define MX25_PAD_GPIO_F__GPIO_F 0x208 0x404 0x000 0x10 0x000 #define MX25_PAD_GPIO_F__LD17 0x208 0x404 0x000 0x12 0x000 #define MX25_PAD_GPIO_F__AUD7_TXC 0x208 0x404 0x000 0x14 0x000 +#define MX25_PAD_GPIO_F__UART4_TXD 0x208 0x404 0x000 0x16 0x000 #define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK 0x20c 0x000 0x000 0x10 0x000 #define MX25_PAD_EXT_ARMCLK__GPIO_3_15 0x20c 0x000 0x000 0x15 0x000 @@ -505,6 +557,7 @@ #define MX25_PAD_VSTBY_REQ__VSTBY_REQ 0x214 0x408 0x000 0x10 0x000 #define MX25_PAD_VSTBY_REQ__AUD7_TXFS 0x214 0x408 0x000 0x14 0x000 #define MX25_PAD_VSTBY_REQ__GPIO_3_17 0x214 0x408 0x000 0x15 0x000 + #define MX25_PAD_VSTBY_ACK__VSTBY_ACK 0x218 0x40c 0x000 0x10 0x000 #define MX25_PAD_VSTBY_ACK__GPIO_3_18 0x218 0x40c 0x000 0x15 0x000 @@ -517,6 +570,7 @@ #define MX25_PAD_BOOT_MODE0__BOOT_MODE0 0x224 0x000 0x000 0x00 0x000 #define MX25_PAD_BOOT_MODE0__GPIO_4_30 0x224 0x000 0x000 0x05 0x000 + #define MX25_PAD_BOOT_MODE1__BOOT_MODE1 0x228 0x000 0x000 0x00 0x000 #define MX25_PAD_BOOT_MODE1__GPIO_4_31 0x228 0x000 0x000 0x05 0x000 diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 4b063b68db44..6951b66d1ab7 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -488,6 +488,7 @@ interrupts = <54>; clocks = <&clks IMX27_CLK_USB_IPG_GATE>; fsl,usbmisc = <&usbmisc 1>; + dr_mode = "host"; status = "disabled"; }; @@ -497,6 +498,7 @@ interrupts = <55>; clocks = <&clks IMX27_CLK_USB_IPG_GATE>; fsl,usbmisc = <&usbmisc 2>; + dr_mode = "host"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx28-apf28.dts b/arch/arm/boot/dts/imx28-apf28.dts index 7198fe3798c6..070e59cbdd8b 100644 --- a/arch/arm/boot/dts/imx28-apf28.dts +++ b/arch/arm/boot/dts/imx28-apf28.dts @@ -78,7 +78,7 @@ phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&mac0_pins_a>; - phy-reset-gpios = <&gpio4 13 0>; + phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts index 1f38a052ad4b..7ac4f1af16ac 100644 --- a/arch/arm/boot/dts/imx28-apf28dev.dts +++ b/arch/arm/boot/dts/imx28-apf28dev.dts @@ -110,6 +110,13 @@ }; }; }; + + can0: can@80032000 { + pinctrl-names = "default"; + pinctrl-0 = <&can0_pins_a>; + xceiver-supply = <®_can0_vcc>; + status = "okay"; + }; }; apbx@80040000 { @@ -130,6 +137,13 @@ status = "okay"; }; + auart0: serial@8006a000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + fsl,uart-has-rtscts; + status = "okay"; + }; + usbphy0: usbphy@8007c000 { status = "okay"; }; @@ -143,7 +157,8 @@ ahb@80080000 { usb0: usb@80080000 { pinctrl-names = "default"; - pinctrl-0 = <&usb0_otg_apf28dev>; + pinctrl-0 = <&usb0_otg_apf28dev + &usb0_id_pins_b>; vbus-supply = <®_usb0_vbus>; status = "okay"; }; @@ -156,7 +171,7 @@ phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&mac1_pins_a>; - phy-reset-gpios = <&gpio0 23 0>; + phy-reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; status = "okay"; }; }; @@ -175,6 +190,14 @@ gpio = <&gpio1 23 1>; enable-active-high; }; + + reg_can0_vcc: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "can0_vcc"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; }; leds { @@ -200,8 +223,9 @@ user-button { label = "User button"; - gpios = <&gpio0 17 0>; + gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; linux,code = <0x100>; + gpio-key,wakeup; }; }; }; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 47f68ac868d4..25e25f82fbae 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -829,6 +829,19 @@ fsl,pull-up = <MXS_PULL_DISABLE>; }; + spi3_pins_b: spi3@1 { + reg = <1>; + fsl,pinmux-ids = < + MX28_PAD_SSP3_SCK__SSP3_SCK + MX28_PAD_SSP3_MOSI__SSP3_CMD + MX28_PAD_SSP3_MISO__SSP3_D0 + MX28_PAD_SSP3_SS0__SSP3_D3 + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + usb0_pins_a: usb0@0 { reg = <0>; fsl,pinmux-ids = < @@ -1197,6 +1210,7 @@ interrupts = <92>; clocks = <&clks 61>; fsl,usbphy = <&usbphy1>; + dr_mode = "host"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index 6932928f3b45..b6478e97d6a7 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -318,6 +318,7 @@ clocks = <&clks 73>; fsl,usbmisc = <&usbmisc 1>; fsl,usbphy = <&usbphy1>; + dr_mode = "host"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index 620b0f030591..e2457138311f 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -197,6 +197,7 @@ reg = <0x53f80200 0x0200>; interrupts = <14>; clocks = <&clks IMX5_CLK_USB_PHY2_GATE>; + dr_mode = "host"; status = "disabled"; }; @@ -205,6 +206,7 @@ reg = <0x53f80400 0x0200>; interrupts = <16>; clocks = <&clks IMX5_CLK_USBOH3_GATE>; + dr_mode = "host"; status = "disabled"; }; @@ -213,6 +215,7 @@ reg = <0x53f80600 0x0200>; interrupts = <17>; clocks = <&clks IMX5_CLK_USBOH3_GATE>; + dr_mode = "host"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index c0116cffc513..f46fe9bf0bcb 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -265,6 +265,7 @@ interrupts = <14>; clocks = <&clks IMX5_CLK_USBOH3_GATE>; fsl,usbmisc = <&usbmisc 1>; + dr_mode = "host"; status = "disabled"; }; @@ -274,6 +275,7 @@ interrupts = <16>; clocks = <&clks IMX5_CLK_USBOH3_GATE>; fsl,usbmisc = <&usbmisc 2>; + dr_mode = "host"; status = "disabled"; }; @@ -283,6 +285,7 @@ interrupts = <17>; clocks = <&clks IMX5_CLK_USBOH3_GATE>; fsl,usbmisc = <&usbmisc 3>; + dr_mode = "host"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index ff4fa7ecacd8..c3e3ca9362fb 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -309,6 +309,7 @@ clocks = <&clks IMX5_CLK_USBOH3_GATE>; fsl,usbmisc = <&usbmisc 1>; fsl,usbphy = <&usbphy1>; + dr_mode = "host"; status = "disabled"; }; @@ -318,6 +319,7 @@ interrupts = <16>; clocks = <&clks IMX5_CLK_USBOH3_GATE>; fsl,usbmisc = <&usbmisc 2>; + dr_mode = "host"; status = "disabled"; }; @@ -327,6 +329,7 @@ interrupts = <17>; clocks = <&clks IMX5_CLK_USBOH3_GATE>; fsl,usbmisc = <&usbmisc 3>; + dr_mode = "host"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts index 9cd06e5e59f0..d4c4a22db488 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts @@ -83,3 +83,7 @@ &ipu1_di0_disp0 { remote-endpoint = <&display0_in>; }; + +&pwm1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts index b413e24288dc..15203f0e9725 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts @@ -72,3 +72,7 @@ &ipu1_di0_disp0 { remote-endpoint = <&display0_in>; }; + +&pwm3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6dl-cubox-i.dts b/arch/arm/boot/dts/imx6dl-cubox-i.dts index 58aa8f2b0f26..e0b7fe8e18f8 100644 --- a/arch/arm/boot/dts/imx6dl-cubox-i.dts +++ b/arch/arm/boot/dts/imx6dl-cubox-i.dts @@ -1,5 +1,43 @@ /* * Copyright (C) 2014 Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts index 44a0e6736bb1..7369d2d7da3e 100644 --- a/arch/arm/boot/dts/imx6dl-hummingboard.dts +++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts @@ -1,6 +1,44 @@ /* * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com) * Based on dt work by Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-cubox-i.dts b/arch/arm/boot/dts/imx6q-cubox-i.dts index 9efd8b0c8011..670bd8c4c847 100644 --- a/arch/arm/boot/dts/imx6q-cubox-i.dts +++ b/arch/arm/boot/dts/imx6q-cubox-i.dts @@ -1,5 +1,43 @@ /* * Copyright (C) 2014 Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-hummingboard.dts b/arch/arm/boot/dts/imx6q-hummingboard.dts index c2bf8476ce45..0f6044553a24 100644 --- a/arch/arm/boot/dts/imx6q-hummingboard.dts +++ b/arch/arm/boot/dts/imx6q-hummingboard.dts @@ -1,6 +1,44 @@ /* * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com) * Based on dt work by Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 93ec79bb6b35..399103b8e2c9 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -294,19 +294,21 @@ }; &mipi_dsi { - port@2 { - reg = <2>; + ports { + port@2 { + reg = <2>; - mipi_mux_2: endpoint { - remote-endpoint = <&ipu2_di0_mipi>; + mipi_mux_2: endpoint { + remote-endpoint = <&ipu2_di0_mipi>; + }; }; - }; - port@3 { - reg = <3>; + port@3 { + reg = <3>; - mipi_mux_3: endpoint { - remote-endpoint = <&ipu2_di1_mipi>; + mipi_mux_3: endpoint { + remote-endpoint = <&ipu2_di1_mipi>; + }; }; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index 6a524ca011e7..d033bb182060 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -1,8 +1,48 @@ /* * Copyright (C) 2014 Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include "imx6qdl-microsom.dtsi" #include "imx6qdl-microsom-ar8035.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> / { ir_recv: ir-receiver { @@ -66,6 +106,18 @@ spdif-controller = <&spdif>; spdif-out; }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&pinctrl_gpio_key>; + pinctrl-names = "default"; + + button_0 { + label = "Button 0"; + gpios = <&gpio3 8 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + }; + }; }; &hdmi { @@ -170,9 +222,19 @@ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059 >; }; + + pinctrl_gpio_key: gpio-key { + fsl,pins = < + MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x17059 + >; + }; }; }; +&pwm1 { + status = "okay"; +}; + &spdif { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cubox_i_spdif>; diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi index 62841e85a91e..151a3db2aea9 100644 --- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi @@ -1,5 +1,43 @@ /* * Copyright (C) 2013,2014 Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include "imx6qdl-microsom.dtsi" #include "imx6qdl-microsom-ar8035.dtsi" @@ -50,6 +88,19 @@ }; }; + sound-sgtl5000 { + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + compatible = "fsl,imx-audio-sgtl5000"; + model = "On-board Codec"; + mux-ext-port = <5>; + mux-int-port = <1>; + ssi-controller = <&ssi1>; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "On-board SPDIF"; @@ -59,6 +110,10 @@ }; }; +&audmux { + status = "okay"; +}; + &can1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard_flexcan1>; @@ -75,16 +130,24 @@ &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard_i2c1>; - - /* - * Not fitted on Carrier-1 board... yet status = "okay"; + /* Pro baseboard model */ rtc: pcf8523@68 { compatible = "nxp,pcf8523"; reg = <0x68>; }; - */ + + /* Pro baseboard model */ + sgtl5000: sgtl5000@0a { + clocks = <&clks IMX6QDL_CLK_CKO>; + compatible = "fsl,sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_sgtl5000>; + reg = <0x0a>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + }; }; &i2c2 { @@ -129,6 +192,20 @@ >; }; + pinctrl_hummingboard_pwm1: pwm1grp { + fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1>; + }; + + pinctrl_hummingboard_sgtl5000: hummingboard-sgtl5000 { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0 + MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 + MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0 + MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 + MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 + >; + }; + pinctrl_hummingboard_spdif: hummingboard-spdif { fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>; }; @@ -168,12 +245,28 @@ }; }; +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_pwm1>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + status = "okay"; +}; + &spdif { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard_spdif>; status = "okay"; }; +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + &usbh1 { disable-over-current; vbus-supply = <®_usbh1_vbus>; diff --git a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi index db9f45b2c573..4a1820309cdb 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi +++ b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi @@ -3,6 +3,44 @@ * * This describes the hookup for an AR8035 to the iMX6 on the SolidRun * MicroSOM. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ &fec { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6qdl-microsom.dtsi b/arch/arm/boot/dts/imx6qdl-microsom.dtsi index 79eac6849d4c..349f82be816e 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom.dtsi +++ b/arch/arm/boot/dts/imx6qdl-microsom.dtsi @@ -1,5 +1,43 @@ /* * Copyright (C) 2013,2014 Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ &iomuxc { diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 009abd69385d..46b2fed7c319 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -182,6 +182,34 @@ }; }; +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-assert-gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; + status = "okay"; + + max7310_a: gpio@30 { + compatible = "maxim,max7310"; + reg = <0x30>; + gpio-controller; + #gpio-cells = <2>; + }; + + max7310_b: gpio@32 { + compatible = "maxim,max7310"; + reg = <0x32>; + gpio-controller; + #gpio-cells = <2>; + }; + + max7310_c: gpio@34 { + compatible = "maxim,max7310"; + reg = <0x34>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; @@ -265,6 +293,13 @@ >; }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; + pinctrl_pwm3: pwm1grp { fsl,pins = < MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index d6c69ec44314..f74a8ded515f 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -53,6 +53,7 @@ interrupt-controller; reg = <0x00a01000 0x1000>, <0x00a00100 0x100>; + interrupt-parent = <&intc>; }; clocks { @@ -82,7 +83,7 @@ #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; - interrupt-parent = <&intc>; + interrupt-parent = <&gpc>; ranges; dma_apbh: dma-apbh@00110000 { @@ -122,6 +123,7 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0x00a00600 0x20>; interrupts = <1 13 0xf01>; + interrupt-parent = <&intc>; clocks = <&clks IMX6QDL_CLK_TWD>; }; @@ -357,6 +359,7 @@ clocks = <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_PWM1>; clock-names = "ipg", "per"; + status = "disabled"; }; pwm2: pwm@02084000 { @@ -367,6 +370,7 @@ clocks = <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_PWM2>; clock-names = "ipg", "per"; + status = "disabled"; }; pwm3: pwm@02088000 { @@ -377,6 +381,7 @@ clocks = <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_PWM3>; clock-names = "ipg", "per"; + status = "disabled"; }; pwm4: pwm@0208c000 { @@ -387,6 +392,7 @@ clocks = <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_PWM4>; clock-names = "ipg", "per"; + status = "disabled"; }; can1: flexcan@02090000 { @@ -598,7 +604,7 @@ regulator-name = "vddpu"; regulator-min-microvolt = <725000>; regulator-max-microvolt = <1450000>; - regulator-always-on; + regulator-enable-ramp-delay = <150>; anatop-reg-offset = <0x140>; anatop-vol-bit-shift = <9>; anatop-vol-bit-width = <5>; @@ -658,7 +664,7 @@ #size-cells = <1>; ranges = <0 0x020cc000 0x4000>; - snvs-rtc-lp@34 { + snvs_rtc: snvs-rtc-lp@34 { compatible = "fsl,sec-v4.0-mon-rtc-lp"; reg = <0x34 0x58>; interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>, @@ -693,8 +699,19 @@ gpc: gpc@020dc000 { compatible = "fsl,imx6q-gpc"; reg = <0x020dc000 0x4000>; + interrupt-controller; + #interrupt-cells = <3>; interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>, <0 90 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&intc>; + pu-supply = <®_pu>; + clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>, + <&clks IMX6QDL_CLK_GPU3D_SHADER>, + <&clks IMX6QDL_CLK_GPU2D_CORE>, + <&clks IMX6QDL_CLK_GPU2D_AXI>, + <&clks IMX6QDL_CLK_OPENVG_AXI>, + <&clks IMX6QDL_CLK_VPU_AXI>; + #power-domain-cells = <1>; }; gpr: iomuxc-gpr@020e0000 { @@ -845,6 +862,7 @@ clocks = <&clks IMX6QDL_CLK_USBOH3>; fsl,usbphy = <&usbphy2>; fsl,usbmisc = <&usbmisc 1>; + dr_mode = "host"; status = "disabled"; }; @@ -854,6 +872,7 @@ interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_USBOH3>; fsl,usbmisc = <&usbmisc 2>; + dr_mode = "host"; status = "disabled"; }; @@ -863,6 +882,7 @@ interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_USBOH3>; fsl,usbmisc = <&usbmisc 3>; + dr_mode = "host"; status = "disabled"; }; @@ -1022,19 +1042,24 @@ reg = <0x021e0000 0x4000>; status = "disabled"; - port@0 { - reg = <0>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; - mipi_mux_0: endpoint { - remote-endpoint = <&ipu1_di0_mipi>; + mipi_mux_0: endpoint { + remote-endpoint = <&ipu1_di0_mipi>; + }; }; - }; - port@1 { - reg = <1>; + port@1 { + reg = <1>; - mipi_mux_1: endpoint { - remote-endpoint = <&ipu1_di1_mipi>; + mipi_mux_1: endpoint { + remote-endpoint = <&ipu1_di1_mipi>; + }; }; }; }; diff --git a/arch/arm/boot/dts/imx6sl-warp.dts b/arch/arm/boot/dts/imx6sl-warp.dts new file mode 100644 index 000000000000..64f7decf1fdc --- /dev/null +++ b/arch/arm/boot/dts/imx6sl-warp.dts @@ -0,0 +1,262 @@ +/* + * Copyright 2014, 2015 O.S. Systems Software LTDA. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "imx6sl.dtsi" + +/ { + model = "WaRP Board"; + compatible = "warp,imx6sl-warp", "fsl,imx6sl"; + + memory { + reg = <0x80000000 0x20000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usb_otg1_vbus: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 0 0>; + enable-active-high; + }; + + reg_usb_otg2_vbus: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 2 0>; + enable-active-high; + }; + + reg_1p8v: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + usdhc3_pwrseq: usdhc3_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>, /* WL_REG_ON */ + <&gpio3 25 GPIO_ACTIVE_LOW>, /* BT_REG_ON */ + <&gpio4 4 GPIO_ACTIVE_LOW>, /* BT_WAKE */ + <&gpio4 6 GPIO_ACTIVE_LOW>; /* BT_RST_N */ + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usb_otg2_vbus>; + disable-over-current; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <4>; + non-removable; + keep-power-in-suspend; + enable-sdio-wakeup; + mmc-pwrseq = <&usdhc3_pwrseq>; + status = "okay"; +}; + +&iomuxc { + imx6sl-warp { + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x41b0b1 + MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x41b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6SL_PAD_EPDC_D12__UART2_RX_DATA 0x41b0b1 + MX6SL_PAD_EPDC_D13__UART2_TX_DATA 0x41b0b1 + MX6SL_PAD_EPDC_D14__UART2_RTS_B 0x4130B1 + MX6SL_PAD_EPDC_D15__UART2_CTS_B 0x4130B1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6SL_PAD_AUD_RXC__UART3_RX_DATA 0x41b0b1 + MX6SL_PAD_AUD_RXC__UART3_TX_DATA 0x41b0b1 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x417059 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x410059 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x417059 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x417059 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x417059 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x417059 + MX6SL_PAD_SD2_DAT4__SD2_DATA4 0x417059 + MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x417059 + MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x417059 + MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x417059 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x4170b9 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x4100b9 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x4170b9 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x4170b9 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x4170b9 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x4170b9 + MX6SL_PAD_SD2_DAT4__SD2_DATA4 0x4170b9 + MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x4170b9 + MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x4170b9 + MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x4170b9 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x4170f9 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x4100f9 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x4170f9 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x4170f9 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x4170f9 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x4170f9 + MX6SL_PAD_SD2_DAT4__SD2_DATA4 0x4170f9 + MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x4170f9 + MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x4170f9 + MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x4170f9 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x417059 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x410059 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x417059 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x417059 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x417059 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x417059 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x4170b9 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x4100b9 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x4170b9 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x4170b9 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x4170b9 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x4170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x4170f9 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x4100f9 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x4170f9 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x4170f9 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x4170f9 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x4170f9 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 36ab8e054cee..a78e715e3982 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -72,6 +72,7 @@ interrupt-controller; reg = <0x00a01000 0x1000>, <0x00a00100 0x100>; + interrupt-parent = <&intc>; }; clocks { @@ -95,7 +96,7 @@ #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; - interrupt-parent = <&intc>; + interrupt-parent = <&gpc>; ranges; ocram: sram@00900000 { @@ -568,7 +569,7 @@ #size-cells = <1>; ranges = <0 0x020cc000 0x4000>; - snvs-rtc-lp@34 { + snvs_rtc: snvs-rtc-lp@34 { compatible = "fsl,sec-v4.0-mon-rtc-lp"; reg = <0x34 0x58>; interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>, @@ -603,7 +604,14 @@ gpc: gpc@020dc000 { compatible = "fsl,imx6sl-gpc", "fsl,imx6q-gpc"; reg = <0x020dc000 0x4000>; + interrupt-controller; + #interrupt-cells = <3>; interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&intc>; + pu-supply = <®_pu>; + clocks = <&clks IMX6SL_CLK_GPU2D_OVG>, + <&clks IMX6SL_CLK_GPU2D_PODF>; + #power-domain-cells = <1>; }; gpr: iomuxc-gpr@020e0000 { @@ -699,6 +707,7 @@ interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SL_CLK_USBOH3>; fsl,usbmisc = <&usbmisc 2>; + dr_mode = "host"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts new file mode 100644 index 000000000000..c76b87cba275 --- /dev/null +++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts @@ -0,0 +1,143 @@ +/* + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "imx6sx-sdb.dtsi" + +/ { + model = "Freescale i.MX6 SoloX SDB RevA Board"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic: pfuze100@08 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&qspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi2>; + status = "okay"; + + flash0: s25fl128s@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25fl128s"; + spi-max-frequency = <66000000>; + }; + + flash1: s25fl128s@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25fl128s"; + spi-max-frequency = <66000000>; + }; +}; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts index 32f07d6b4042..0bfc4e7865b2 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dts +++ b/arch/arm/boot/dts/imx6sx-sdb.dts @@ -1,197 +1,40 @@ /* - * Copyright (C) 2014 Freescale Semiconductor, Inc. + * Copyright (C) 2015 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include "imx6sx.dtsi" +#include "imx6sx-sdb.dtsi" / { - model = "Freescale i.MX6 SoloX SDB Board"; - compatible = "fsl,imx6sx-sdb", "fsl,imx6sx"; - - chosen { - stdout-path = &uart1; - }; - - memory { - reg = <0x80000000 0x40000000>; - }; - - backlight { - compatible = "pwm-backlight"; - pwms = <&pwm3 0 5000000>; - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <6>; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_keys>; - - volume-up { - label = "Volume Up"; - gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; - linux,code = <KEY_VOLUMEUP>; - }; - - volume-down { - label = "Volume Down"; - gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; - linux,code = <KEY_VOLUMEDOWN>; - }; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - vcc_sd3: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_vcc_sd3>; - regulator-name = "VCC_SD3"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_usb_otg1_vbus: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb_otg1>; - regulator-name = "usb_otg1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_usb_otg2_vbus: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb_otg2>; - regulator-name = "usb_otg2_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_psu_5v: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "PSU-5V0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - reg_lcd_3v3: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "lcd-3v3"; - gpio = <&gpio3 27 0>; - enable-active-high; - }; - - reg_peri_3v3: regulator@5 { - compatible = "regulator-fixed"; - reg = <5>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_peri_3v3>; - regulator-name = "peri_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-always-on; - }; - - reg_enet_3v3: regulator@6 { - compatible = "regulator-fixed"; - reg = <6>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet_3v3>; - regulator-name = "enet_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; - }; - }; - - sound { - compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962"; - model = "wm8962-audio"; - ssi-controller = <&ssi2>; - audio-codec = <&codec>; - audio-routing = - "Headphone Jack", "HPOUTL", - "Headphone Jack", "HPOUTR", - "Ext Spk", "SPKOUTL", - "Ext Spk", "SPKOUTR", - "AMIC", "MICBIAS", - "IN3R", "AMIC"; - mux-int-port = <2>; - mux-ext-port = <6>; - }; -}; - -&audmux { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_audmux>; - status = "okay"; + model = "Freescale i.MX6 SoloX SDB RevB Board"; }; -&fec1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet1>; - phy-supply = <®_enet_3v3>; - phy-mode = "rgmii"; - phy-handle = <ðphy1>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy1: ethernet-phy@1 { - reg = <1>; - }; - - ethphy2: ethernet-phy@2 { - reg = <2>; - }; - }; +&cpu0 { + operating-points = < + /* kHz uV */ + 996000 1250000 + 792000 1175000 + 396000 1175000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC uV */ + 996000 1250000 + 792000 1175000 + 396000 1175000 + >; }; -&fec2 { +&i2c1 { + clock-frequency = <100000>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet2>; - phy-mode = "rgmii"; - phy-handle = <ðphy2>; + pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; -}; - -&i2c1 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - status = "okay"; pmic: pfuze100@08 { - compatible = "fsl,pfuze100"; + compatible = "fsl,pfuze200"; reg = <0x08>; regulators { @@ -203,14 +46,6 @@ regulator-ramp-delay = <6250>; }; - sw1c_reg: sw1c { - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1875000>; - regulator-boot-on; - regulator-always-on; - regulator-ramp-delay = <6250>; - }; - sw2_reg: sw2 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <3300000>; @@ -232,11 +67,6 @@ regulator-always-on; }; - sw4_reg: sw4 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3300000>; - }; - swbst_reg: swbst { regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5150000>; @@ -292,401 +122,24 @@ }; }; -&i2c4 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c4>; - status = "okay"; - - codec: wm8962@1a { - compatible = "wlf,wm8962"; - reg = <0x1a>; - clocks = <&clks IMX6SX_CLK_AUDIO>; - DCVDD-supply = <&vgen4_reg>; - DBVDD-supply = <&vgen4_reg>; - AVDD-supply = <&vgen4_reg>; - CPVDD-supply = <&vgen4_reg>; - MICVDD-supply = <&vgen3_reg>; - PLLVDD-supply = <&vgen4_reg>; - SPKVDD1-supply = <®_psu_5v>; - SPKVDD2-supply = <®_psu_5v>; - }; -}; - -&lcdif1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd>; - lcd-supply = <®_lcd_3v3>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <16>; - bus-width = <24>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <33500000>; - hactive = <800>; - vactive = <480>; - hback-porch = <89>; - hfront-porch = <164>; - vback-porch = <23>; - vfront-porch = <10>; - hsync-len = <10>; - vsync-len = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; -}; - -&pwm3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm3>; - status = "okay"; -}; - -&snvs_poweroff { - status = "okay"; -}; - &qspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_qspi2>; status = "okay"; - flash0: s25fl128s@0 { - reg = <0>; + flash0: n25q256a@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25fl128s"; - spi-max-frequency = <66000000>; + compatible = "micron,n25q256a"; + spi-max-frequency = <29000000>; + reg = <0>; }; - flash1: s25fl128s@1 { - reg = <1>; + flash1: n25q256a@1 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25fl128s"; - spi-max-frequency = <66000000>; - }; -}; - -&ssi2 { - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart5 { /* for bluetooth */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5>; - fsl,uart-has-rtscts; - status = "okay"; -}; - -&usbotg1 { - vbus-supply = <®_usb_otg1_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb_otg1_id>; - status = "okay"; -}; - -&usbotg2 { - vbus-supply = <®_usb_otg2_vbus>; - dr_mode = "host"; - status = "okay"; -}; - -&usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2>; - non-removable; - no-1-8-v; - keep-power-in-suspend; - enable-sdio-wakeup; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc3>; - pinctrl-1 = <&pinctrl_usdhc3_100mhz>; - pinctrl-2 = <&pinctrl_usdhc3_200mhz>; - bus-width = <8>; - cd-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; - wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>; - keep-power-in-suspend; - enable-sdio-wakeup; - vmmc-supply = <&vcc_sd3>; - status = "okay"; -}; - -&usdhc4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc4>; - cd-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>; - wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>; - status = "okay"; -}; - -&iomuxc { - imx6x-sdb { - pinctrl_audmux: audmuxgrp { - fsl,pins = < - MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC 0x130b0 - MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS 0x130b0 - MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD 0x120b0 - MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD 0x130b0 - MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK 0x130b0 - >; - }; - - pinctrl_enet1: enet1grp { - fsl,pins = < - MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0b1 - MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0b1 - MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC 0xa0b1 - MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0b1 - MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0b1 - MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2 0xa0b1 - MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3 0xa0b1 - MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0b1 - MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK 0x3081 - MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081 - MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081 - MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x3081 - MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081 - MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081 - MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x91 - >; - }; - - pinctrl_enet_3v3: enet3v3grp { - fsl,pins = < - MX6SX_PAD_ENET2_COL__GPIO2_IO_6 0x80000000 - >; - }; - - pinctrl_enet2: enet2grp { - fsl,pins = < - MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC 0xa0b9 - MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0xa0b1 - MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0xa0b1 - MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2 0xa0b1 - MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3 0xa0b1 - MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0xa0b1 - MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK 0x3081 - MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x3081 - MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x3081 - MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2 0x3081 - MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3 0x3081 - MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x3081 - >; - }; - - pinctrl_gpio_keys: gpio_keysgrp { - fsl,pins = < - MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059 - MX6SX_PAD_CSI_DATA05__GPIO1_IO_19 0x17059 - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1 - MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1 - >; - }; - - pinctrl_i2c4: i2c4grp { - fsl,pins = < - MX6SX_PAD_CSI_DATA07__I2C4_SDA 0x4001b8b1 - MX6SX_PAD_CSI_DATA06__I2C4_SCL 0x4001b8b1 - >; - }; - - pinctrl_lcd: lcdgrp { - fsl,pins = < - MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0 - MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0 - MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0 - MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0 - MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0 - MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0 - MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0 - MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0 - MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0 - MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0 - MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0 - MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0 - MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0 - MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0 - MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0 - MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0 - MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0 - MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0 - MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0 - MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0 - MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0 - MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0 - MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0 - MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0 - MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x4001b0b0 - MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0 - MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0 - MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0 - MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0 - >; - }; - - pinctrl_peri_3v3: peri3v3grp { - fsl,pins = < - MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16 0x80000000 - >; - }; - - pinctrl_pwm3: pwm3grp-1 { - fsl,pins = < - MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x110b0 - >; - }; - - pinctrl_qspi2: qspi2grp { - fsl,pins = < - MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0 0x70f1 - MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1 0x70f1 - MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2 0x70f1 - MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3 0x70f1 - MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK 0x70f1 - MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B 0x70f1 - MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0 0x70f1 - MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1 0x70f1 - MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2 0x70f1 - MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3 0x70f1 - MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK 0x70f1 - MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B 0x70f1 - >; - }; - - pinctrl_vcc_sd3: vccsd3grp { - fsl,pins = < - MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059 - >; - }; - - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1 - MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1 - >; - }; - - pinctrl_uart5: uart5grp { - fsl,pins = < - MX6SX_PAD_KEY_ROW3__UART5_RX 0x1b0b1 - MX6SX_PAD_KEY_COL3__UART5_TX 0x1b0b1 - MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x1b0b1 - MX6SX_PAD_KEY_COL2__UART5_RTS_B 0x1b0b1 - >; - }; - - pinctrl_usb_otg1: usbotg1grp { - fsl,pins = < - MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x10b0 - >; - }; - - pinctrl_usb_otg1_id: usbotg1idgrp { - fsl,pins = < - MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x17059 - >; - }; - - pinctrl_usb_otg2: usbot2ggrp { - fsl,pins = < - MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12 0x10b0 - >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059 - MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059 - MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059 - MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059 - MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059 - MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059 - >; - }; - - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17059 - MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10059 - MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17059 - MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17059 - MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17059 - MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17059 - MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x17059 - MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x17059 - MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x17059 - MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x17059 - MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x17059 /* CD */ - MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x17059 /* WP */ - >; - }; - - pinctrl_usdhc3_100mhz: usdhc3grp-100mhz { - fsl,pins = < - MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170b9 - MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100b9 - MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170b9 - MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170b9 - MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170b9 - MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170b9 - MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170b9 - MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170b9 - MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170b9 - MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170b9 - >; - }; - - pinctrl_usdhc3_200mhz: usdhc3grp-200mhz { - fsl,pins = < - MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170f9 - MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100f9 - MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170f9 - MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170f9 - MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170f9 - MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170f9 - MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170f9 - MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170f9 - MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170f9 - MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170f9 - >; - }; - - pinctrl_usdhc4: usdhc4grp { - fsl,pins = < - MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059 - MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059 - MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059 - MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059 - MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059 - MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059 - MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x17059 /* CD */ - MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x17059 /* WP */ - >; - }; + compatible = "micron,n25q256a"; + spi-max-frequency = <29000000>; + reg = <1>; }; }; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi new file mode 100644 index 000000000000..cef04cef3a80 --- /dev/null +++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi @@ -0,0 +1,562 @@ +/* + * Copyright (C) 2014 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "imx6sx.dtsi" + +/ { + model = "Freescale i.MX6 SoloX SDB Board"; + compatible = "fsl,imx6sx-sdb", "fsl,imx6sx"; + + chosen { + stdout-path = &uart1; + }; + + memory { + reg = <0x80000000 0x40000000>; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm3 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + volume-up { + label = "Volume Up"; + gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + + volume-down { + label = "Volume Down"; + gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vcc_sd3: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_vcc_sd3>; + regulator-name = "VCC_SD3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg1_vbus: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1>; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg2_vbus: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg2>; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_psu_5v: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "PSU-5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_lcd_3v3: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "lcd-3v3"; + gpio = <&gpio3 27 0>; + enable-active-high; + }; + + reg_peri_3v3: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_peri_3v3>; + regulator-name = "peri_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_enet_3v3: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_3v3>; + regulator-name = "enet_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; + }; + }; + + sound { + compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962"; + model = "wm8962-audio"; + ssi-controller = <&ssi2>; + audio-codec = <&codec>; + audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "Ext Spk", "SPKOUTL", + "Ext Spk", "SPKOUTR", + "AMIC", "MICBIAS", + "IN3R", "AMIC"; + mux-int-port = <2>; + mux-ext-port = <6>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-supply = <®_enet_3v3>; + phy-mode = "rgmii"; + phy-handle = <ðphy1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; + + ethphy2: ethernet-phy@2 { + reg = <2>; + }; + }; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + phy-mode = "rgmii"; + phy-handle = <ðphy2>; + status = "okay"; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + codec: wm8962@1a { + compatible = "wlf,wm8962"; + reg = <0x1a>; + clocks = <&clks IMX6SX_CLK_AUDIO>; + DCVDD-supply = <&vgen4_reg>; + DBVDD-supply = <&vgen4_reg>; + AVDD-supply = <&vgen4_reg>; + CPVDD-supply = <&vgen4_reg>; + MICVDD-supply = <&vgen3_reg>; + PLLVDD-supply = <&vgen4_reg>; + SPKVDD1-supply = <®_psu_5v>; + SPKVDD2-supply = <®_psu_5v>; + }; +}; + +&lcdif1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd>; + lcd-supply = <®_lcd_3v3>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <16>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33500000>; + hactive = <800>; + vactive = <480>; + hback-porch = <89>; + hfront-porch = <164>; + vback-porch = <23>; + vfront-porch = <10>; + hsync-len = <10>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&ssi2 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart5 { /* for bluetooth */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1_id>; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usb_otg2_vbus>; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + non-removable; + no-1-8-v; + keep-power-in-suspend; + enable-sdio-wakeup; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + cd-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>; + keep-power-in-suspend; + enable-sdio-wakeup; + vmmc-supply = <&vcc_sd3>; + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + cd-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&iomuxc { + imx6x-sdb { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC 0x130b0 + MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS 0x130b0 + MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD 0x120b0 + MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD 0x130b0 + MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK 0x130b0 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0b1 + MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0b1 + MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC 0xa0b1 + MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0b1 + MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0b1 + MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2 0xa0b1 + MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3 0xa0b1 + MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0b1 + MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK 0x3081 + MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081 + MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081 + MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x3081 + MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081 + MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081 + MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x91 + >; + }; + + pinctrl_enet_3v3: enet3v3grp { + fsl,pins = < + MX6SX_PAD_ENET2_COL__GPIO2_IO_6 0x80000000 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC 0xa0b9 + MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0xa0b1 + MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0xa0b1 + MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2 0xa0b1 + MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3 0xa0b1 + MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0xa0b1 + MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK 0x3081 + MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x3081 + MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x3081 + MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2 0x3081 + MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3 0x3081 + MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x3081 + >; + }; + + pinctrl_gpio_keys: gpio_keysgrp { + fsl,pins = < + MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059 + MX6SX_PAD_CSI_DATA05__GPIO1_IO_19 0x17059 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1 + MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX6SX_PAD_CSI_DATA07__I2C4_SDA 0x4001b8b1 + MX6SX_PAD_CSI_DATA06__I2C4_SCL 0x4001b8b1 + >; + }; + + pinctrl_lcd: lcdgrp { + fsl,pins = < + MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0 + MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0 + MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0 + MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0 + MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0 + MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0 + MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0 + MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0 + MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0 + MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0 + MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0 + MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0 + MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0 + MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0 + MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0 + MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0 + MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0 + MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0 + MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0 + MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0 + MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0 + MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0 + MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0 + MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0 + MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x4001b0b0 + MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0 + MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0 + MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0 + MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0 + >; + }; + + pinctrl_peri_3v3: peri3v3grp { + fsl,pins = < + MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16 0x80000000 + >; + }; + + pinctrl_pwm3: pwm3grp-1 { + fsl,pins = < + MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x110b0 + >; + }; + + pinctrl_qspi2: qspi2grp { + fsl,pins = < + MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0 0x70f1 + MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1 0x70f1 + MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2 0x70f1 + MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3 0x70f1 + MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK 0x70f1 + MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B 0x70f1 + MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0 0x70f1 + MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1 0x70f1 + MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2 0x70f1 + MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3 0x70f1 + MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK 0x70f1 + MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B 0x70f1 + >; + }; + + pinctrl_vcc_sd3: vccsd3grp { + fsl,pins = < + MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1 + MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6SX_PAD_KEY_ROW3__UART5_RX 0x1b0b1 + MX6SX_PAD_KEY_COL3__UART5_TX 0x1b0b1 + MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x1b0b1 + MX6SX_PAD_KEY_COL2__UART5_RTS_B 0x1b0b1 + >; + }; + + pinctrl_usb_otg1: usbotg1grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x10b0 + >; + }; + + pinctrl_usb_otg1_id: usbotg1idgrp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x17059 + >; + }; + + pinctrl_usb_otg2: usbot2ggrp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12 0x10b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059 + MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059 + MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059 + MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059 + MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059 + MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17059 + MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10059 + MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17059 + MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17059 + MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17059 + MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17059 + MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x17059 + MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x17059 + MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x17059 + MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x17059 + MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x17059 /* CD */ + MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x17059 /* WP */ + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp-100mhz { + fsl,pins = < + MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170b9 + MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100b9 + MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170b9 + MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170b9 + MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170b9 + MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170b9 + MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170b9 + MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170b9 + MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170b9 + MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp-200mhz { + fsl,pins = < + MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170f9 + MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100f9 + MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170f9 + MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170f9 + MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170f9 + MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170f9 + MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170f9 + MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170f9 + MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170f9 + MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170f9 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059 + MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059 + MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059 + MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059 + MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059 + MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059 + MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x17059 /* CD */ + MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x17059 /* WP */ + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 7a24fee1e7ae..708175d59b9c 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -88,6 +88,7 @@ interrupt-controller; reg = <0x00a01000 0x1000>, <0x00a00100 0x100>; + interrupt-parent = <&intc>; }; clocks { @@ -131,7 +132,7 @@ #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; - interrupt-parent = <&intc>; + interrupt-parent = <&gpc>; ranges; pmu { @@ -666,7 +667,7 @@ #size-cells = <1>; ranges = <0 0x020cc000 0x4000>; - snvs-rtc-lp@34 { + snvs_rtc: snvs-rtc-lp@34 { compatible = "fsl,sec-v4.0-mon-rtc-lp"; reg = <0x34 0x58>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; @@ -700,7 +701,10 @@ gpc: gpc@020dc000 { compatible = "fsl,imx6sx-gpc", "fsl,imx6q-gpc"; reg = <0x020dc000 0x4000>; + interrupt-controller; + #interrupt-cells = <3>; interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&intc>; }; iomuxc: iomuxc@020e0000 { @@ -763,6 +767,7 @@ fsl,usbmisc = <&usbmisc 2>; phy_type = "hsic"; fsl,anatop = <&anatop>; + dr_mode = "host"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi index e2b2e93d7b61..5b9a376cc31e 100644 --- a/arch/arm/boot/dts/omap2420.dtsi +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -14,47 +14,65 @@ compatible = "ti,omap2420", "ti,omap2"; ocp { - prcm: prcm@48008000 { - compatible = "ti,omap2-prcm"; - reg = <0x48008000 0x1000>; + l4: l4@48000000 { + compatible = "ti,omap2-l4", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x48000000 0x100000>; - prcm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; + prcm: prcm@8000 { + compatible = "ti,omap2-prcm"; + reg = <0x8000 0x1000>; - prcm_clockdomains: clockdomains { - }; - }; + prcm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; - scrm: scrm@48000000 { - compatible = "ti,omap2-scrm"; - reg = <0x48000000 0x1000>; + prcm_clockdomains: clockdomains { + }; + }; - scrm_clocks: clocks { + scm: scm@0 { + compatible = "ti,omap2-scm", "simple-bus"; + reg = <0x0 0x1000>; #address-cells = <1>; - #size-cells = <0>; + #size-cells = <1>; + ranges = <0 0x0 0x1000>; + + omap2420_pmx: pinmux@30 { + compatible = "ti,omap2420-padconf", + "pinctrl-single"; + reg = <0x30 0x0113>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <8>; + pinctrl-single,function-mask = <0x3f>; + }; + + scm_conf: scm_conf@270 { + compatible = "syscon"; + reg = <0x270 0x100>; + #address-cells = <1>; + #size-cells = <1>; + + scm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + scm_clockdomains: clockdomains { + }; }; - scrm_clockdomains: clockdomains { + counter32k: counter@4000 { + compatible = "ti,omap-counter32k"; + reg = <0x4000 0x20>; + ti,hwmods = "counter_32k"; }; }; - counter32k: counter@48004000 { - compatible = "ti,omap-counter32k"; - reg = <0x48004000 0x20>; - ti,hwmods = "counter_32k"; - }; - - omap2420_pmx: pinmux@48000030 { - compatible = "ti,omap2420-padconf", "pinctrl-single"; - reg = <0x48000030 0x0113>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-single,register-width = <8>; - pinctrl-single,function-mask = <0x3f>; - }; - gpio1: gpio@48018000 { compatible = "ti,omap2-gpio"; reg = <0x48018000 0x200>; diff --git a/arch/arm/boot/dts/omap2430-clocks.dtsi b/arch/arm/boot/dts/omap2430-clocks.dtsi index 805f75df1cf2..93fed68839b9 100644 --- a/arch/arm/boot/dts/omap2430-clocks.dtsi +++ b/arch/arm/boot/dts/omap2430-clocks.dtsi @@ -8,12 +8,12 @@ * published by the Free Software Foundation. */ -&scrm_clocks { +&scm_clocks { mcbsp3_mux_fck: mcbsp3_mux_fck { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&func_96m_ck>, <&mcbsp_clks>; - reg = <0x02e8>; + reg = <0x78>; }; mcbsp3_fck: mcbsp3_fck { @@ -27,7 +27,7 @@ compatible = "ti,composite-mux-clock"; clocks = <&func_96m_ck>, <&mcbsp_clks>; ti,bit-shift = <2>; - reg = <0x02e8>; + reg = <0x78>; }; mcbsp4_fck: mcbsp4_fck { @@ -41,7 +41,7 @@ compatible = "ti,composite-mux-clock"; clocks = <&func_96m_ck>, <&mcbsp_clks>; ti,bit-shift = <4>; - reg = <0x02e8>; + reg = <0x78>; }; mcbsp5_fck: mcbsp5_fck { diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index 0dc8de2782b1..11a7963be003 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -14,60 +14,73 @@ compatible = "ti,omap2430", "ti,omap2"; ocp { - prcm: prcm@49006000 { - compatible = "ti,omap2-prcm"; - reg = <0x49006000 0x1000>; + l4_wkup: l4_wkup@49000000 { + compatible = "ti,omap2-l4-wkup", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x49000000 0x31000>; - prcm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; + prcm: prcm@6000 { + compatible = "ti,omap2-prcm"; + reg = <0x6000 0x1000>; - prcm_clockdomains: clockdomains { - }; - }; - - scrm: scrm@49002000 { - compatible = "ti,omap2-scrm"; - reg = <0x49002000 0x1000>; + prcm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; - scrm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; + prcm_clockdomains: clockdomains { + }; }; - scrm_clockdomains: clockdomains { + scm: scm@2000 { + compatible = "ti,omap2-scm", "simple-bus"; + reg = <0x2000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2000 0x1000>; + + omap2430_pmx: pinmux@30 { + compatible = "ti,omap2430-padconf", + "pinctrl-single"; + reg = <0x30 0x0154>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <8>; + pinctrl-single,function-mask = <0x3f>; + }; + + scm_conf: scm_conf@270 { + compatible = "syscon"; + reg = <0x270 0x240>; + #address-cells = <1>; + #size-cells = <1>; + + scm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + pbias_regulator: pbias_regulator { + compatible = "ti,pbias-omap"; + reg = <0x230 0x4>; + syscon = <&scm_conf>; + pbias_mmc_reg: pbias_mmc_omap2430 { + regulator-name = "pbias_mmc_omap2430"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + }; + }; + + scm_clockdomains: clockdomains { + }; }; - }; - - counter32k: counter@49020000 { - compatible = "ti,omap-counter32k"; - reg = <0x49020000 0x20>; - ti,hwmods = "counter_32k"; - }; - - omap2430_pmx: pinmux@49002030 { - compatible = "ti,omap2430-padconf", "pinctrl-single"; - reg = <0x49002030 0x0154>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-single,register-width = <8>; - pinctrl-single,function-mask = <0x3f>; - }; - - omap2_scm_general: tisyscon@49002270 { - compatible = "syscon"; - reg = <0x49002270 0x240>; - }; - pbias_regulator: pbias_regulator { - compatible = "ti,pbias-omap"; - reg = <0x230 0x4>; - syscon = <&omap2_scm_general>; - pbias_mmc_reg: pbias_mmc_omap2430 { - regulator-name = "pbias_mmc_omap2430"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; + counter32k: counter@20000 { + compatible = "ti,omap-counter32k"; + reg = <0x20000 0x20>; + ti,hwmods = "counter_32k"; }; }; diff --git a/arch/arm/boot/dts/omap24xx-clocks.dtsi b/arch/arm/boot/dts/omap24xx-clocks.dtsi index a1365ca926eb..63965b876973 100644 --- a/arch/arm/boot/dts/omap24xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap24xx-clocks.dtsi @@ -7,13 +7,13 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -&scrm_clocks { +&scm_clocks { mcbsp1_mux_fck: mcbsp1_mux_fck { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&func_96m_ck>, <&mcbsp_clks>; ti,bit-shift = <2>; - reg = <0x0274>; + reg = <0x4>; }; mcbsp1_fck: mcbsp1_fck { @@ -27,7 +27,7 @@ compatible = "ti,composite-mux-clock"; clocks = <&func_96m_ck>, <&mcbsp_clks>; ti,bit-shift = <6>; - reg = <0x0274>; + reg = <0x4>; }; mcbsp2_fck: mcbsp2_fck { diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 3fdc84fddb70..d18a90f5eca3 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -87,6 +87,60 @@ ranges; ti,hwmods = "l3_main"; + l4_core: l4@48000000 { + compatible = "ti,omap3-l4-core", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x48000000 0x1000000>; + + scm: scm@2000 { + compatible = "ti,omap3-scm", "simple-bus"; + reg = <0x2000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2000 0x2000>; + + omap3_pmx_core: pinmux@30 { + compatible = "ti,omap3-padconf", + "pinctrl-single"; + reg = <0x30 0x238>; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0xff1f>; + }; + + scm_conf: scm_conf@270 { + compatible = "syscon"; + reg = <0x270 0x330>; + #address-cells = <1>; + #size-cells = <1>; + + scm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + scm_clockdomains: clockdomains { + }; + + omap3_pmx_wkup: pinmux@a00 { + compatible = "ti,omap3-padconf", + "pinctrl-single"; + reg = <0xa00 0x5c>; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0xff1f>; + }; + }; + }; + aes: aes@480c5000 { compatible = "ti,omap3-aes"; ti,hwmods = "aes"; @@ -123,19 +177,6 @@ }; }; - scrm: scrm@48002000 { - compatible = "ti,omap3-scrm"; - reg = <0x48002000 0x2000>; - - scrm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - scrm_clockdomains: clockdomains { - }; - }; - counter32k: counter@48320000 { compatible = "ti,omap-counter32k"; reg = <0x48320000 0x20>; @@ -161,37 +202,10 @@ dma-requests = <96>; }; - omap3_pmx_core: pinmux@48002030 { - compatible = "ti,omap3-padconf", "pinctrl-single"; - reg = <0x48002030 0x0238>; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0xff1f>; - }; - - omap3_pmx_wkup: pinmux@48002a00 { - compatible = "ti,omap3-padconf", "pinctrl-single"; - reg = <0x48002a00 0x5c>; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0xff1f>; - }; - - omap3_scm_general: tisyscon@48002270 { - compatible = "syscon"; - reg = <0x48002270 0x2f0>; - }; - pbias_regulator: pbias_regulator { compatible = "ti,pbias-omap"; reg = <0x2b0 0x4>; - syscon = <&omap3_scm_general>; + syscon = <&scm_conf>; pbias_mmc_reg: pbias_mmc_omap2430 { regulator-name = "pbias_mmc_omap2430"; regulator-min-microvolt = <1800000>; diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi index 7bc8c0f72ddb..4f6b2d5b1902 100644 --- a/arch/arm/boot/dts/omap34xx.dtsi +++ b/arch/arm/boot/dts/omap34xx.dtsi @@ -46,7 +46,7 @@ 0x480bd800 0x017c>; interrupts = <24>; iommus = <&mmu_isp>; - syscon = <&omap3_scm_general 0xdc>; + syscon = <&scm_conf 0xdc>; ti,phy-type = <OMAP3ISP_PHY_TYPE_COMPLEX_IO>; #clock-cells = <1>; ports { diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi index 3502fe00ec7d..86253de5a97a 100644 --- a/arch/arm/boot/dts/omap36xx.dtsi +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -78,7 +78,7 @@ 0x480bd800 0x0600>; interrupts = <24>; iommus = <&mmu_isp>; - syscon = <&omap3_scm_general 0x2f0>; + syscon = <&scm_conf 0x2f0>; ti,phy-type = <OMAP3ISP_PHY_TYPE_CSIPHY>; #clock-cells = <1>; ports { diff --git a/arch/arm/boot/dts/omap3xxx-clocks.dtsi b/arch/arm/boot/dts/omap3xxx-clocks.dtsi index 5c375003bad1..bbba5bdc4bc9 100644 --- a/arch/arm/boot/dts/omap3xxx-clocks.dtsi +++ b/arch/arm/boot/dts/omap3xxx-clocks.dtsi @@ -79,13 +79,14 @@ clock-div = <1>; }; }; -&scrm_clocks { + +&scm_clocks { mcbsp5_mux_fck: mcbsp5_mux_fck { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&core_96m_fck>, <&mcbsp_clks>; ti,bit-shift = <4>; - reg = <0x02d8>; + reg = <0x68>; }; mcbsp5_fck: mcbsp5_fck { @@ -99,7 +100,7 @@ compatible = "ti,composite-mux-clock"; clocks = <&core_96m_fck>, <&mcbsp_clks>; ti,bit-shift = <2>; - reg = <0x0274>; + reg = <0x04>; }; mcbsp1_fck: mcbsp1_fck { @@ -113,7 +114,7 @@ compatible = "ti,composite-mux-clock"; clocks = <&per_96m_fck>, <&mcbsp_clks>; ti,bit-shift = <6>; - reg = <0x0274>; + reg = <0x04>; }; mcbsp2_fck: mcbsp2_fck { @@ -126,7 +127,7 @@ #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&per_96m_fck>, <&mcbsp_clks>; - reg = <0x02d8>; + reg = <0x68>; }; mcbsp3_fck: mcbsp3_fck { @@ -140,7 +141,7 @@ compatible = "ti,composite-mux-clock"; clocks = <&per_96m_fck>, <&mcbsp_clks>; ti,bit-shift = <2>; - reg = <0x02d8>; + reg = <0x68>; }; mcbsp4_fck: mcbsp4_fck { diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index f2091d1c9c36..f884d6adb71e 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -124,99 +124,141 @@ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - cm1: cm1@4a004000 { - compatible = "ti,omap4-cm1"; - reg = <0x4a004000 0x2000>; - - cm1_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; + l4_cfg: l4@4a000000 { + compatible = "ti,omap4-l4-cfg", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4a000000 0x1000000>; - cm1_clockdomains: clockdomains { - }; - }; + cm1: cm1@4000 { + compatible = "ti,omap4-cm1"; + reg = <0x4000 0x2000>; - prm: prm@4a306000 { - compatible = "ti,omap4-prm"; - reg = <0x4a306000 0x3000>; - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + cm1_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; - prm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; + cm1_clockdomains: clockdomains { + }; }; - prm_clockdomains: clockdomains { - }; - }; + cm2: cm2@8000 { + compatible = "ti,omap4-cm2"; + reg = <0x8000 0x3000>; - cm2: cm2@4a008000 { - compatible = "ti,omap4-cm2"; - reg = <0x4a008000 0x3000>; + cm2_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; - cm2_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; + cm2_clockdomains: clockdomains { + }; }; - cm2_clockdomains: clockdomains { + omap4_scm_core: scm@2000 { + compatible = "ti,omap4-scm-core", "simple-bus"; + reg = <0x2000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2000 0x1000>; + + scm_conf: scm_conf@0 { + compatible = "syscon"; + reg = <0x0 0x800>; + #address-cells = <1>; + #size-cells = <1>; + }; }; - }; - - scrm: scrm@4a30a000 { - compatible = "ti,omap4-scrm"; - reg = <0x4a30a000 0x2000>; - scrm_clocks: clocks { + omap4_padconf_core: scm@100000 { + compatible = "ti,omap4-scm-padconf-core", + "simple-bus"; #address-cells = <1>; - #size-cells = <0>; + #size-cells = <1>; + ranges = <0 0x100000 0x1000>; + + omap4_pmx_core: pinmux@40 { + compatible = "ti,omap4-padconf", + "pinctrl-single"; + reg = <0x40 0x0196>; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; + + omap4_padconf_global: omap4_padconf_global@5a0 { + compatible = "syscon"; + reg = <0x5a0 0x170>; + #address-cells = <1>; + #size-cells = <1>; + + pbias_regulator: pbias_regulator { + compatible = "ti,pbias-omap"; + reg = <0x60 0x4>; + syscon = <&omap4_padconf_global>; + pbias_mmc_reg: pbias_mmc_omap4 { + regulator-name = "pbias_mmc_omap4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + }; + }; }; - scrm_clockdomains: clockdomains { - }; - }; - - counter32k: counter@4a304000 { - compatible = "ti,omap-counter32k"; - reg = <0x4a304000 0x20>; - ti,hwmods = "counter_32k"; - }; - - omap4_pmx_core: pinmux@4a100040 { - compatible = "ti,omap4-padconf", "pinctrl-single"; - reg = <0x4a100040 0x0196>; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0x7fff>; - }; - omap4_pmx_wkup: pinmux@4a31e040 { - compatible = "ti,omap4-padconf", "pinctrl-single"; - reg = <0x4a31e040 0x0038>; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0x7fff>; - }; - - omap4_padconf_global: tisyscon@4a1005a0 { - compatible = "syscon"; - reg = <0x4a1005a0 0x170>; - }; - - pbias_regulator: pbias_regulator { - compatible = "ti,pbias-omap"; - reg = <0x60 0x4>; - syscon = <&omap4_padconf_global>; - pbias_mmc_reg: pbias_mmc_omap4 { - regulator-name = "pbias_mmc_omap4"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; + l4_wkup: l4@300000 { + compatible = "ti,omap4-l4-wkup", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x300000 0x40000>; + + counter32k: counter@4000 { + compatible = "ti,omap-counter32k"; + reg = <0x4000 0x20>; + ti,hwmods = "counter_32k"; + }; + + prm: prm@6000 { + compatible = "ti,omap4-prm"; + reg = <0x6000 0x3000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + + prm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + prm_clockdomains: clockdomains { + }; + }; + + scrm: scrm@a000 { + compatible = "ti,omap4-scrm"; + reg = <0xa000 0x2000>; + + scrm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + scrm_clockdomains: clockdomains { + }; + }; + + omap4_pmx_wkup: pinmux@1e040 { + compatible = "ti,omap4-padconf", + "pinctrl-single"; + reg = <0x1e040 0x0038>; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; }; }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 77b5f70d0ebc..efe5f737f39b 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -139,99 +139,141 @@ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - prm: prm@4ae06000 { - compatible = "ti,omap5-prm"; - reg = <0x4ae06000 0x3000>; - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + l4_cfg: l4@4a000000 { + compatible = "ti,omap5-l4-cfg", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4a000000 0x22a000>; - prm_clocks: clocks { + scm_core: scm@2000 { + compatible = "ti,omap5-scm-core", "simple-bus"; + reg = <0x2000 0x1000>; #address-cells = <1>; - #size-cells = <0>; + #size-cells = <1>; + ranges = <0 0x2000 0x800>; + + scm_conf: scm_conf@0 { + compatible = "syscon"; + reg = <0x0 0x800>; + #address-cells = <1>; + #size-cells = <1>; + }; }; - prm_clockdomains: clockdomains { + scm_padconf_core: scm@2800 { + compatible = "ti,omap5-scm-padconf-core", + "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2800 0x800>; + + omap5_pmx_core: pinmux@40 { + compatible = "ti,omap5-padconf", + "pinctrl-single"; + reg = <0x40 0x01b6>; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; + + omap5_padconf_global: omap5_padconf_global@5a0 { + compatible = "syscon"; + reg = <0x5a0 0xec>; + #address-cells = <1>; + #size-cells = <1>; + + pbias_regulator: pbias_regulator { + compatible = "ti,pbias-omap"; + reg = <0x60 0x4>; + syscon = <&omap5_padconf_global>; + pbias_mmc_reg: pbias_mmc_omap5 { + regulator-name = "pbias_mmc_omap5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + }; + }; }; - }; - cm_core_aon: cm_core_aon@4a004000 { - compatible = "ti,omap5-cm-core-aon"; - reg = <0x4a004000 0x2000>; + cm_core_aon: cm_core_aon@4000 { + compatible = "ti,omap5-cm-core-aon"; + reg = <0x4000 0x2000>; - cm_core_aon_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; + cm_core_aon_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; - cm_core_aon_clockdomains: clockdomains { + cm_core_aon_clockdomains: clockdomains { + }; }; - }; - scrm: scrm@4ae0a000 { - compatible = "ti,omap5-scrm"; - reg = <0x4ae0a000 0x2000>; + cm_core: cm_core@8000 { + compatible = "ti,omap5-cm-core"; + reg = <0x8000 0x3000>; - scrm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; + cm_core_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; - scrm_clockdomains: clockdomains { + cm_core_clockdomains: clockdomains { + }; }; }; - cm_core: cm_core@4a008000 { - compatible = "ti,omap5-cm-core"; - reg = <0x4a008000 0x3000>; + l4_wkup: l4@4ae00000 { + compatible = "ti,omap5-l4-wkup", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4ae00000 0x2b000>; - cm_core_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; + counter32k: counter@4000 { + compatible = "ti,omap-counter32k"; + reg = <0x4000 0x40>; + ti,hwmods = "counter_32k"; }; - cm_core_clockdomains: clockdomains { + prm: prm@6000 { + compatible = "ti,omap5-prm"; + reg = <0x6000 0x3000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + + prm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + prm_clockdomains: clockdomains { + }; }; - }; - counter32k: counter@4ae04000 { - compatible = "ti,omap-counter32k"; - reg = <0x4ae04000 0x40>; - ti,hwmods = "counter_32k"; - }; + scrm: scrm@a000 { + compatible = "ti,omap5-scrm"; + reg = <0xa000 0x2000>; - omap5_pmx_core: pinmux@4a002840 { - compatible = "ti,omap5-padconf", "pinctrl-single"; - reg = <0x4a002840 0x01b6>; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0x7fff>; - }; - omap5_pmx_wkup: pinmux@4ae0c840 { - compatible = "ti,omap5-padconf", "pinctrl-single"; - reg = <0x4ae0c840 0x0038>; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0x7fff>; - }; + scrm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; - omap5_padconf_global: tisyscon@4a002da0 { - compatible = "syscon"; - reg = <0x4A002da0 0xec>; - }; + scrm_clockdomains: clockdomains { + }; + }; - pbias_regulator: pbias_regulator { - compatible = "ti,pbias-omap"; - reg = <0x60 0x4>; - syscon = <&omap5_padconf_global>; - pbias_mmc_reg: pbias_mmc_omap5 { - regulator-name = "pbias_mmc_omap5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; + omap5_pmx_wkup: pinmux@c840 { + compatible = "ti,omap5-padconf", + "pinctrl-single"; + reg = <0xc840 0x0038>; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; }; }; diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi index 36cafbfa1bfa..606753eb72c8 100644 --- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi @@ -12,6 +12,12 @@ bootargs = "console=ttyLP0,115200"; }; + clk16m: clk16m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <16000000>; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -47,6 +53,21 @@ status = "okay"; }; +&dspi1 { + status = "okay"; + + mcp2515can: can@0 { + compatible = "microchip,mcp2515"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can_int>; + reg = <0>; + clocks = <&clk16m>; + spi-max-frequency = <10000000>; + interrupt-parent = <&gpio1>; + interrupts = <11 GPIO_ACTIVE_LOW>; + }; +}; + &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; @@ -94,3 +115,13 @@ &usbh1 { vbus-supply = <&usbh_vbus_reg>; }; + +&iomuxc { + vf610-colibri { + pinctrl_can_int: can_int { + fsl,pins = < + VF610_PAD_PTB21__GPIO_43 0x22ed + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi index 5c2b7320856d..fbef0828e930 100644 --- a/arch/arm/boot/dts/vf-colibri.dtsi +++ b/arch/arm/boot/dts/vf-colibri.dtsi @@ -23,6 +23,12 @@ status = "okay"; }; +&dspi1 { + bus-num = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dspi1>; +}; + &edma0 { status = "okay"; }; @@ -107,6 +113,15 @@ >; }; + pinctrl_dspi1: dspi1grp { + fsl,pins = < + VF610_PAD_PTD5__DSPI1_CS0 0x33e2 + VF610_PAD_PTD6__DSPI1_SIN 0x33e1 + VF610_PAD_PTD7__DSPI1_SOUT 0x33e2 + VF610_PAD_PTD8__DSPI1_SCK 0x33e2 + >; + }; + pinctrl_esdhc1: esdhc1grp { fsl,pins = < VF610_PAD_PTA24__ESDHC1_CLK 0x31ef diff --git a/arch/arm/boot/dts/vf500.dtsi b/arch/arm/boot/dts/vf500.dtsi index 1dbf8d2d1ddf..e976d2fa1527 100644 --- a/arch/arm/boot/dts/vf500.dtsi +++ b/arch/arm/boot/dts/vf500.dtsi @@ -24,14 +24,13 @@ }; soc { - interrupt-parent = <&intc>; - aips-bus@40000000 { intc: interrupt-controller@40002000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; interrupt-controller; + interrupt-parent = <&intc>; reg = <0x40003000 0x1000>, <0x40002100 0x100>; }; @@ -40,145 +39,17 @@ compatible = "arm,cortex-a9-global-timer"; reg = <0x40002200 0x20>; interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&intc>; clocks = <&clks VF610_CLK_PLATFORM_BUS>; }; }; }; }; -&adc0 { - interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; -}; - -&adc1 { - interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; -}; - -&can0 { - interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; -}; - -&can1 { - interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; -}; - -&dspi0 { - interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; -}; - -&edma0 { - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "edma-tx", "edma-err"; -}; - -&edma1 { - interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "edma-tx", "edma-err"; -}; - -&esdhc1 { - interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; -}; - -&fec0 { - interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; -}; - -&fec1 { - interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; -}; - -&ftm { - interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; -}; - -&gpio0 { - interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; -}; - -&gpio1 { - interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; -}; - -&gpio2 { - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; -}; - -&gpio3 { - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; -}; - -&gpio4 { - interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; -}; - -&i2c0 { - interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; -}; - -&pit { - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; -}; - -&qspi0 { - interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; -}; - -&sai2 { - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; -}; - -&snvsrtc { - interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; -}; - -&src { - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; -}; - -&uart0 { - interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; -}; - -&uart1 { - interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; -}; - -&uart2 { - interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; -}; - -&uart3 { - interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; -}; - -&uart4 { - interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; -}; - -&uart5 { - interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; -}; - -&usbdev0 { - interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; -}; - -&usbh1 { - interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; -}; - -&usbphy0 { - interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; -}; - -&usbphy1 { - interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; +&mscm_ir { + interrupt-parent = <&intc>; }; &wdoga5 { - interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index a29c7ce15eaf..4aa335166be7 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -54,6 +54,7 @@ #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; + interrupt-parent = <&mscm_ir>; ranges; aips0: aips-bus@40000000 { @@ -62,6 +63,19 @@ #size-cells = <1>; ranges; + mscm_cpucfg: cpucfg@40001000 { + compatible = "fsl,vf610-mscm-cpucfg", "syscon"; + reg = <0x40001000 0x800>; + }; + + mscm_ir: interrupt-controller@40001800 { + compatible = "fsl,vf610-mscm-ir"; + reg = <0x40001800 0x400>; + fsl,cpucfg = <&mscm_cpucfg>; + interrupt-controller; + #interrupt-cells = <2>; + }; + edma0: dma-controller@40018000 { #dma-cells = <2>; compatible = "fsl,vf610-edma"; @@ -69,6 +83,9 @@ <0x40024000 0x1000>, <0x40025000 0x1000>; dma-channels = <32>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>, + <9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma-tx", "edma-err"; clock-names = "dmamux0", "dmamux1"; clocks = <&clks VF610_CLK_DMAMUX0>, <&clks VF610_CLK_DMAMUX1>; @@ -78,6 +95,7 @@ can0: flexcan@40020000 { compatible = "fsl,vf610-flexcan"; reg = <0x40020000 0x4000>; + interrupts = <58 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_FLEXCAN0>, <&clks VF610_CLK_FLEXCAN0>; clock-names = "ipg", "per"; @@ -87,6 +105,7 @@ uart0: serial@40027000 { compatible = "fsl,vf610-lpuart"; reg = <0x40027000 0x1000>; + interrupts = <61 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_UART0>; clock-names = "ipg"; dmas = <&edma0 0 2>, @@ -98,6 +117,7 @@ uart1: serial@40028000 { compatible = "fsl,vf610-lpuart"; reg = <0x40028000 0x1000>; + interrupts = <62 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_UART1>; clock-names = "ipg"; dmas = <&edma0 0 4>, @@ -109,6 +129,7 @@ uart2: serial@40029000 { compatible = "fsl,vf610-lpuart"; reg = <0x40029000 0x1000>; + interrupts = <63 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_UART2>; clock-names = "ipg"; dmas = <&edma0 0 6>, @@ -120,6 +141,7 @@ uart3: serial@4002a000 { compatible = "fsl,vf610-lpuart"; reg = <0x4002a000 0x1000>; + interrupts = <64 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_UART3>; clock-names = "ipg"; dmas = <&edma0 0 8>, @@ -133,15 +155,29 @@ #size-cells = <0>; compatible = "fsl,vf610-dspi"; reg = <0x4002c000 0x1000>; + interrupts = <67 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_DSPI0>; clock-names = "dspi"; spi-num-chipselects = <5>; status = "disabled"; }; + dspi1: dspi1@4002d000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,vf610-dspi"; + reg = <0x4002d000 0x1000>; + interrupts = <68 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_DSPI1>; + clock-names = "dspi"; + spi-num-chipselects = <5>; + status = "disabled"; + }; + sai2: sai@40031000 { compatible = "fsl,vf610-sai"; reg = <0x40031000 0x1000>; + interrupts = <86 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_SAI2>; clock-names = "sai"; dma-names = "tx", "rx"; @@ -153,6 +189,7 @@ pit: pit@40037000 { compatible = "fsl,vf610-pit"; reg = <0x40037000 0x1000>; + interrupts = <39 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_PIT>; clock-names = "pit"; }; @@ -186,6 +223,7 @@ adc0: adc@4003b000 { compatible = "fsl,vf610-adc"; reg = <0x4003b000 0x1000>; + interrupts = <53 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_ADC0>; clock-names = "adc"; status = "disabled"; @@ -194,6 +232,7 @@ wdoga5: wdog@4003e000 { compatible = "fsl,vf610-wdt", "fsl,imx21-wdt"; reg = <0x4003e000 0x1000>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_WDT>; clock-names = "wdog"; status = "disabled"; @@ -204,6 +243,7 @@ #size-cells = <0>; compatible = "fsl,vf610-qspi"; reg = <0x40044000 0x1000>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_QSPI0_EN>, <&clks VF610_CLK_QSPI0>; clock-names = "qspi_en", "qspi"; @@ -213,7 +253,6 @@ iomuxc: iomuxc@40048000 { compatible = "fsl,vf610-iomuxc"; reg = <0x40048000 0x1000>; - #gpio-range-cells = <3>; }; gpio0: gpio@40049000 { @@ -221,6 +260,7 @@ reg = <0x40049000 0x1000 0x400ff000 0x40>; gpio-controller; #gpio-cells = <2>; + interrupts = <107 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&iomuxc 0 0 32>; @@ -231,6 +271,7 @@ reg = <0x4004a000 0x1000 0x400ff040 0x40>; gpio-controller; #gpio-cells = <2>; + interrupts = <108 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&iomuxc 0 32 32>; @@ -241,6 +282,7 @@ reg = <0x4004b000 0x1000 0x400ff080 0x40>; gpio-controller; #gpio-cells = <2>; + interrupts = <109 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&iomuxc 0 64 32>; @@ -251,6 +293,7 @@ reg = <0x4004c000 0x1000 0x400ff0c0 0x40>; gpio-controller; #gpio-cells = <2>; + interrupts = <110 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&iomuxc 0 96 32>; @@ -261,6 +304,7 @@ reg = <0x4004d000 0x1000 0x400ff100 0x40>; gpio-controller; #gpio-cells = <2>; + interrupts = <111 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&iomuxc 0 128 7>; @@ -274,6 +318,7 @@ usbphy0: usbphy@40050800 { compatible = "fsl,vf610-usbphy"; reg = <0x40050800 0x400>; + interrupts = <50 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_USBPHY0>; fsl,anatop = <&anatop>; status = "disabled"; @@ -282,6 +327,7 @@ usbphy1: usbphy@40050c00 { compatible = "fsl,vf610-usbphy"; reg = <0x40050c00 0x400>; + interrupts = <51 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_USBPHY1>; fsl,anatop = <&anatop>; status = "disabled"; @@ -292,6 +338,7 @@ #size-cells = <0>; compatible = "fsl,vf610-i2c"; reg = <0x40066000 0x1000>; + interrupts = <71 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_I2C0>; clock-names = "ipg"; dmas = <&edma0 0 50>, @@ -311,6 +358,7 @@ usbdev0: usb@40034000 { compatible = "fsl,vf610-usb", "fsl,imx27-usb"; reg = <0x40034000 0x800>; + interrupts = <75 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_USBC0>; fsl,usbphy = <&usbphy0>; fsl,usbmisc = <&usbmisc0 0>; @@ -329,6 +377,7 @@ src: src@4006e000 { compatible = "fsl,vf610-src", "syscon"; reg = <0x4006e000 0x1000>; + interrupts = <96 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -345,6 +394,9 @@ <0x400a1000 0x1000>, <0x400a2000 0x1000>; dma-channels = <32>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>, + <11 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma-tx", "edma-err"; clock-names = "dmamux0", "dmamux1"; clocks = <&clks VF610_CLK_DMAMUX2>, <&clks VF610_CLK_DMAMUX3>; @@ -360,6 +412,7 @@ snvsrtc: snvs-rtc-lp@34 { compatible = "fsl,sec-v4.0-mon-rtc-lp"; reg = <0x34 0x58>; + interrupts = <100 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_SNVS>; clock-names = "snvs-rtc"; }; @@ -368,6 +421,7 @@ uart4: serial@400a9000 { compatible = "fsl,vf610-lpuart"; reg = <0x400a9000 0x1000>; + interrupts = <65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_UART4>; clock-names = "ipg"; status = "disabled"; @@ -376,6 +430,7 @@ uart5: serial@400aa000 { compatible = "fsl,vf610-lpuart"; reg = <0x400aa000 0x1000>; + interrupts = <66 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_UART5>; clock-names = "ipg"; status = "disabled"; @@ -384,6 +439,7 @@ adc1: adc@400bb000 { compatible = "fsl,vf610-adc"; reg = <0x400bb000 0x1000>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_ADC1>; clock-names = "adc"; status = "disabled"; @@ -392,6 +448,7 @@ esdhc1: esdhc@400b2000 { compatible = "fsl,imx53-esdhc"; reg = <0x400b2000 0x1000>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_IPG_BUS>, <&clks VF610_CLK_PLATFORM_BUS>, <&clks VF610_CLK_ESDHC1>; @@ -402,6 +459,7 @@ usbh1: usb@400b4000 { compatible = "fsl,vf610-usb", "fsl,imx27-usb"; reg = <0x400b4000 0x800>; + interrupts = <76 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_USBC1>; fsl,usbphy = <&usbphy1>; fsl,usbmisc = <&usbmisc1 0>; @@ -420,6 +478,7 @@ ftm: ftm@400b8000 { compatible = "fsl,ftm-timer"; reg = <0x400b8000 0x1000 0x400b9000 0x1000>; + interrupts = <44 IRQ_TYPE_LEVEL_HIGH>; clock-names = "ftm-evt", "ftm-src", "ftm-evt-counter-en", "ftm-src-counter-en"; clocks = <&clks VF610_CLK_FTM2>, @@ -432,6 +491,7 @@ fec0: ethernet@400d0000 { compatible = "fsl,mvf600-fec"; reg = <0x400d0000 0x1000>; + interrupts = <78 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_ENET0>, <&clks VF610_CLK_ENET0>, <&clks VF610_CLK_ENET>; @@ -442,6 +502,7 @@ fec1: ethernet@400d1000 { compatible = "fsl,mvf600-fec"; reg = <0x400d1000 0x1000>; + interrupts = <79 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_ENET1>, <&clks VF610_CLK_ENET1>, <&clks VF610_CLK_ENET>; @@ -452,6 +513,7 @@ can1: flexcan@400d4000 { compatible = "fsl,vf610-flexcan"; reg = <0x400d4000 0x4000>; + interrupts = <59 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_FLEXCAN1>, <&clks VF610_CLK_FLEXCAN1>; clock-names = "ipg", "per"; |