diff options
Diffstat (limited to 'arch/arm/boot/dts')
-rw-r--r-- | arch/arm/boot/dts/am437x-idk-evm.dts | 4 | ||||
-rw-r--r-- | arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 3 | ||||
-rw-r--r-- | arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/dra7-evm.dts | 4 | ||||
-rw-r--r-- | arch/arm/boot/dts/dra7-l4.dtsi | 4 | ||||
-rw-r--r-- | arch/arm/boot/dts/dra7.dtsi | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/dra76x.dtsi | 5 | ||||
-rw-r--r-- | arch/arm/boot/dts/dra7xx-clocks.dtsi | 12 | ||||
-rw-r--r-- | arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts | 4 | ||||
-rw-r--r-- | arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi | 1 | ||||
-rw-r--r-- | arch/arm/boot/dts/imx7-colibri.dtsi | 1 | ||||
-rw-r--r-- | arch/arm/boot/dts/imx7d.dtsi | 6 | ||||
-rw-r--r-- | arch/arm/boot/dts/ls1021a.dtsi | 4 | ||||
-rw-r--r-- | arch/arm/boot/dts/motorola-mapphone-common.dtsi | 13 | ||||
-rw-r--r-- | arch/arm/boot/dts/r8a7779.dtsi | 2 |
16 files changed, 43 insertions, 26 deletions
diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts index f3ced6df0c9b..9f66f96d09c9 100644 --- a/arch/arm/boot/dts/am437x-idk-evm.dts +++ b/arch/arm/boot/dts/am437x-idk-evm.dts @@ -526,11 +526,11 @@ * Supply voltage supervisor on board will not allow opp50 so * disable it and set opp100 as suspend OPP. */ - opp50@300000000 { + opp50-300000000 { status = "disabled"; }; - opp100@600000000 { + opp100-600000000 { opp-suspend; }; }; diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts index 1b5a835f66bd..efea891b1a76 100644 --- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts +++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts @@ -21,6 +21,7 @@ aliases { ethernet0 = &genet; + pcie0 = &pcie0; }; leds { @@ -31,6 +32,8 @@ pwr { label = "PWR"; gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; + default-state = "keep"; + linux,default-trigger = "default-on"; }; }; diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts index 66ab35eccba7..28be0332c1c8 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts @@ -26,6 +26,8 @@ pwr { label = "PWR"; gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; + default-state = "keep"; + linux,default-trigger = "default-on"; }; }; }; diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts index 74ed6d047807..37343148643d 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts @@ -27,6 +27,8 @@ pwr { label = "PWR"; gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; + default-state = "keep"; + linux,default-trigger = "default-on"; }; }; diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index de7f85efaa51..af06a55d1c5c 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -61,10 +61,10 @@ regulator-max-microvolt = <1800000>; }; - evm_3v3: fixedregulator-evm3v3 { + vsys_3v3: fixedregulator-vsys3v3 { /* Output of Cntlr A of TPS43351-Q1 on dra7-evm */ compatible = "regulator-fixed"; - regulator-name = "evm_3v3"; + regulator-name = "vsys_3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; vin-supply = <&evm_12v0>; diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi index fc418834890d..2119a78e9c15 100644 --- a/arch/arm/boot/dts/dra7-l4.dtsi +++ b/arch/arm/boot/dts/dra7-l4.dtsi @@ -3474,6 +3474,7 @@ clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER13_CLKCTRL 24>; clock-names = "fck"; interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; }; }; @@ -3501,6 +3502,7 @@ clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER14_CLKCTRL 24>; clock-names = "fck"; interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; }; }; @@ -3528,6 +3530,7 @@ clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 24>; clock-names = "fck"; interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; }; }; @@ -3555,6 +3558,7 @@ clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 24>; clock-names = "fck"; interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; }; }; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index d78b684e7fca..4305051bb769 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -184,6 +184,7 @@ device_type = "pci"; ranges = <0x81000000 0 0 0x03000 0 0x00010000 0x82000000 0 0x20013000 0x13000 0 0xffed000>; + dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>; bus-range = <0x00 0xff>; #interrupt-cells = <1>; num-lanes = <1>; @@ -238,6 +239,7 @@ device_type = "pci"; ranges = <0x81000000 0 0 0x03000 0 0x00010000 0x82000000 0 0x30013000 0x13000 0 0xffed000>; + dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>; bus-range = <0x00 0xff>; #interrupt-cells = <1>; num-lanes = <1>; diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi index 2f7539afef2b..42b8a205b64f 100644 --- a/arch/arm/boot/dts/dra76x.dtsi +++ b/arch/arm/boot/dts/dra76x.dtsi @@ -128,3 +128,8 @@ &usb4_tm { status = "disabled"; }; + +&mmc3 { + /* dra76x is not affected by i887 */ + max-frequency = <96000000>; +}; diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index 55cef4cac5f1..dc0a93bccbf1 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -796,16 +796,6 @@ clock-div = <1>; }; - ipu1_gfclk_mux: ipu1_gfclk_mux@520 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&dpll_abe_m2x2_ck>, <&dpll_core_h22x2_ck>; - ti,bit-shift = <24>; - reg = <0x0520>; - assigned-clocks = <&ipu1_gfclk_mux>; - assigned-clock-parents = <&dpll_core_h22x2_ck>; - }; - dummy_ck: dummy_ck { #clock-cells = <0>; compatible = "fixed-clock"; @@ -1564,6 +1554,8 @@ compatible = "ti,clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; + assigned-clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 24>; + assigned-clock-parents = <&dpll_core_h22x2_ck>; }; ipu_clkctrl: ipu-clkctrl@50 { diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts index cd075621de52..84fcc203a2e4 100644 --- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts @@ -275,7 +275,7 @@ /* SRAM on Colibri nEXT_CS0 */ sram@0,0 { - compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram"; + compatible = "cypress,cy7c1019dv33-10zsxi", "mtd-ram"; reg = <0 0 0x00010000>; #address-cells = <1>; #size-cells = <1>; @@ -286,7 +286,7 @@ /* SRAM on Colibri nEXT_CS1 */ sram@1,0 { - compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram"; + compatible = "cypress,cy7c1019dv33-10zsxi", "mtd-ram"; reg = <1 0 0x00010000>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi index 978dc1c2ff1b..4d18952658f8 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi @@ -192,7 +192,6 @@ pinctrl-0 = <&pinctrl_usdhc4>; bus-width = <8>; non-removable; - vmmc-supply = <&vdd_emmc_1p8>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi index d05be3f0e2a7..04717cf69db0 100644 --- a/arch/arm/boot/dts/imx7-colibri.dtsi +++ b/arch/arm/boot/dts/imx7-colibri.dtsi @@ -336,7 +336,6 @@ assigned-clock-rates = <400000000>; bus-width = <8>; fsl,tuning-step = <2>; - max-frequency = <100000000>; vmmc-supply = <®_module_3v3>; vqmmc-supply = <®_DCDC3>; non-removable; diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index 92f6d0c2a74f..4c22828df55f 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -44,7 +44,7 @@ opp-hz = /bits/ 64 <792000000>; opp-microvolt = <1000000>; clock-latency-ns = <150000>; - opp-supported-hw = <0xd>, <0xf>; + opp-supported-hw = <0xd>, <0x7>; opp-suspend; }; @@ -52,7 +52,7 @@ opp-hz = /bits/ 64 <996000000>; opp-microvolt = <1100000>; clock-latency-ns = <150000>; - opp-supported-hw = <0xc>, <0xf>; + opp-supported-hw = <0xc>, <0x7>; opp-suspend; }; @@ -60,7 +60,7 @@ opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1225000>; clock-latency-ns = <150000>; - opp-supported-hw = <0x8>, <0xf>; + opp-supported-hw = <0x8>, <0x3>; opp-suspend; }; }; diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 0855b1fe98e0..760a68c163c8 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -747,7 +747,7 @@ }; mdio0: mdio@2d24000 { - compatible = "fsl,etsec2-mdio"; + compatible = "gianfar"; device_type = "mdio"; #address-cells = <1>; #size-cells = <0>; @@ -756,7 +756,7 @@ }; mdio1: mdio@2d64000 { - compatible = "fsl,etsec2-mdio"; + compatible = "gianfar"; device_type = "mdio"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi index 85665506f4f8..b6e82b165f5c 100644 --- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi +++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi @@ -182,6 +182,14 @@ pwm-names = "enable", "direction"; direction-duty-cycle-ns = <10000000>; }; + + backlight: backlight { + compatible = "led-backlight"; + + leds = <&backlight_led>; + brightness-levels = <31 63 95 127 159 191 223 255>; + default-brightness-level = <6>; + }; }; &dss { @@ -205,6 +213,8 @@ vddi-supply = <&lcd_regulator>; reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */ + backlight = <&backlight>; + width-mm = <50>; height-mm = <89>; @@ -393,12 +403,11 @@ ramp-up-us = <1024>; ramp-down-us = <8193>; - led@0 { + backlight_led: led@0 { reg = <0>; led-sources = <2>; ti,led-mode = <0>; label = ":backlight"; - linux,default-trigger = "backlight"; }; led@1 { diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index beb9885e6ffc..c0999e27e9b1 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -377,7 +377,7 @@ }; sata: sata@fc600000 { - compatible = "renesas,sata-r8a7779", "renesas,rcar-sata"; + compatible = "renesas,sata-r8a7779"; reg = <0xfc600000 0x200000>; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7779_CLK_SATA>; |