diff options
Diffstat (limited to 'arch/arm/boot/dts')
236 files changed, 12200 insertions, 2829 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index e8dd99201397..e6a1cac0bfc7 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -55,6 +55,7 @@ dtb-$(CONFIG_SOC_SAM_V7) += \ at91-nattis-2-natte-2.dtb \ at91-sama5d27_som1_ek.dtb \ at91-sama5d27_wlsom1_ek.dtb \ + at91-sama5d2_icp.dtb \ at91-sama5d2_ptc_ek.dtb \ at91-sama5d2_xplained.dtb \ at91-sama5d3_xplained.dtb \ @@ -181,6 +182,7 @@ dtb-$(CONFIG_ARCH_EXYNOS3) += \ exynos3250-monk.dtb \ exynos3250-rinato.dtb dtb-$(CONFIG_ARCH_EXYNOS4) += \ + exynos4210-i9100.dtb \ exynos4210-origen.dtb \ exynos4210-smdkv310.dtb \ exynos4210-trats.dtb \ @@ -237,6 +239,7 @@ dtb-$(CONFIG_ARCH_HIX5HD2) += \ hisi-x5hd2-dkb.dtb dtb-$(CONFIG_ARCH_INTEGRATOR) += \ integratorap.dtb \ + integratorap-im-pd1.dtb \ integratorcp.dtb dtb-$(CONFIG_ARCH_IXP4XX) += \ intel-ixp42x-linksys-nslu2.dtb \ @@ -279,6 +282,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \ kirkwood-iomega_ix2_200.dtb \ kirkwood-is2.dtb \ kirkwood-km_kirkwood.dtb \ + kirkwood-l-50.dtb \ kirkwood-laplug.dtb \ kirkwood-linkstation-lsqvl.dtb \ kirkwood-linkstation-lsvl.dtb \ @@ -412,6 +416,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-aristainetos2_4.dtb \ imx6dl-aristainetos2_7.dtb \ imx6dl-colibri-eval-v3.dtb \ + imx6dl-colibri-v1_1-eval-v3.dtb \ imx6dl-cubox-i.dtb \ imx6dl-cubox-i-emmc-som-v15.dtb \ imx6dl-cubox-i-som-v15.dtb \ @@ -832,6 +837,7 @@ dtb-$(CONFIG_SOC_DRA7XX) += \ am57xx-beagle-x15.dtb \ am57xx-beagle-x15-revb1.dtb \ am57xx-beagle-x15-revc.dtb \ + am5729-beagleboneai.dtb \ am57xx-cl-som-am57x.dtb \ am57xx-sbc-am57x.dtb \ am572x-idk.dtb \ @@ -896,6 +902,9 @@ dtb-$(CONFIG_ARCH_QCOM) += \ dtb-$(CONFIG_ARCH_RDA) += \ rda8810pl-orangepi-2g-iot.dtb \ rda8810pl-orangepi-i96.dtb +dtb-$(CONFIG_ARCH_REALTEK) += \ + rtd1195-horseradish.dtb \ + rtd1195-mele-x1000.dtb dtb-$(CONFIG_ARCH_REALVIEW) += \ arm-realview-pb1176.dtb \ arm-realview-pb11mp.dtb \ @@ -917,6 +926,7 @@ dtb-$(CONFIG_ARCH_RENESAS) += \ r7s9210-rza2mevb.dtb \ r8a73a4-ape6evm.dtb \ r8a7740-armadillo800eva.dtb \ + r8a7742-iwg21d-q7.dtb \ r8a7743-iwg20d-q7.dtb \ r8a7743-iwg20d-q7-dbcm-ca.dtb \ r8a7743-sk-rzg1m.dtb \ @@ -1029,11 +1039,15 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32h743i-eval.dtb \ stm32h743i-disco.dtb \ stm32mp157a-avenger96.dtb \ + stm32mp157a-dhcor-avenger96.dtb \ stm32mp157a-dk1.dtb \ + stm32mp157a-iot-box.dtb \ + stm32mp157a-stinger96.dtb \ stm32mp157c-dhcom-pdk2.dtb \ stm32mp157c-dk2.dtb \ stm32mp157c-ed1.dtb \ - stm32mp157c-ev1.dtb + stm32mp157c-ev1.dtb \ + stm32mp157c-lxa-mc1.dtb dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-a1000.dtb \ sun4i-a10-ba10-tvbox.dtb \ @@ -1110,6 +1124,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-olimex-som204-evb.dtb \ sun7i-a20-olimex-som204-evb-emmc.dtb \ sun7i-a20-olinuxino-lime.dtb \ + sun7i-a20-olinuxino-lime-emmc.dtb \ sun7i-a20-olinuxino-lime2.dtb \ sun7i-a20-olinuxino-lime2-emmc.dtb \ sun7i-a20-olinuxino-micro.dtb \ @@ -1339,6 +1354,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-facebook-wedge40.dtb \ aspeed-bmc-facebook-wedge100.dtb \ aspeed-bmc-facebook-yamp.dtb \ + aspeed-bmc-facebook-yosemitev2.dtb \ aspeed-bmc-ibm-rainier.dtb \ aspeed-bmc-intel-s2600wf.dtb \ aspeed-bmc-inspur-fp5280g2.dtb \ @@ -1347,6 +1363,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-microsoft-olympus.dtb \ aspeed-bmc-opp-lanyang.dtb \ aspeed-bmc-opp-mihawk.dtb \ + aspeed-bmc-opp-nicole.dtb \ aspeed-bmc-opp-palmetto.dtb \ aspeed-bmc-opp-romulus.dtb \ aspeed-bmc-opp-swift.dtb \ diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts index c13756fa0f55..99a408a2ec6a 100644 --- a/arch/arm/boot/dts/am571x-idk.dts +++ b/arch/arm/boot/dts/am571x-idk.dts @@ -10,6 +10,7 @@ #include "dra7-mmc-iodelay.dtsi" #include "dra72x-mmc-iodelay.dtsi" #include "am57xx-idk-common.dtsi" +#include "dra7-ipu-dsp-common.dtsi" / { model = "TI AM5718 IDK"; @@ -20,6 +21,33 @@ reg = <0x0 0x80000000 0x0 0x40000000>; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ipu2_memory_region: ipu2-memory@95800000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x95800000 0x0 0x3800000>; + reusable; + status = "okay"; + }; + + dsp1_memory_region: dsp1-memory@99000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x99000000 0x0 0x4000000>; + reusable; + status = "okay"; + }; + + ipu1_memory_region: ipu1-memory@9d000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x9d000000 0x0 0x2000000>; + reusable; + status = "okay"; + }; + }; + leds { compatible = "gpio-leds"; cpu0-led { @@ -148,21 +176,19 @@ load-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; }; -&mailbox5 { +&ipu2 { status = "okay"; - mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { - status = "okay"; - }; - mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { - status = "okay"; - }; + memory-region = <&ipu2_memory_region>; }; -&mailbox6 { +&ipu1 { status = "okay"; - mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { - status = "okay"; - }; + memory-region = <&ipu1_memory_region>; +}; + +&dsp1 { + status = "okay"; + memory-region = <&dsp1_memory_region>; }; &pcie1_rc { diff --git a/arch/arm/boot/dts/am5729-beagleboneai.dts b/arch/arm/boot/dts/am5729-beagleboneai.dts new file mode 100644 index 000000000000..9877d7709d41 --- /dev/null +++ b/arch/arm/boot/dts/am5729-beagleboneai.dts @@ -0,0 +1,731 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2014-2019 Texas Instruments Incorporated - http://www.ti.com/ + */ + +/dts-v1/; + +#include "dra74x.dtsi" +#include "am57xx-commercial-grade.dtsi" +#include "dra74x-mmc-iodelay.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/dra.h> + +/ { + model = "BeagleBoard.org BeagleBone AI"; + compatible = "beagle,am5729-beagleboneai", "ti,am5728", + "ti,dra742", "ti,dra74", "ti,dra7"; + + aliases { + rtc0 = &tps659038_rtc; + rtc1 = &rtc; + display0 = &hdmi_conn; + }; + + chosen { + stdout-path = &uart1; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x40000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ipu2_memory_region: ipu2-memory@95800000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x95800000 0x0 0x3800000>; + reusable; + status = "okay"; + }; + + dsp1_memory_region: dsp1-memory@99000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x99000000 0x0 0x4000000>; + reusable; + status = "okay"; + }; + + ipu1_memory_region: ipu1-memory@9d000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x9d000000 0x0 0x2000000>; + reusable; + status = "okay"; + }; + + dsp2_memory_region: dsp2-memory@9f000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x9f000000 0x0 0x800000>; + reusable; + status = "okay"; + }; + + }; + + vdd_adc: gpioregulator-vdd_adc { + compatible = "regulator-gpio"; + regulator-name = "vdd_adc"; + vin-supply = <&vdd_5v>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; + states = <1800000 0 + 3300000 1>; + }; + + vdd_5v: fixedregulator-vdd_5v { + compatible = "regulator-fixed"; + regulator-name = "vdd_5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vtt_fixed: fixedregulator-vtt { + /* TPS51200 */ + compatible = "regulator-fixed"; + regulator-name = "vtt_fixed"; + vin-supply = <&vdd_ddr>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + leds { + compatible = "gpio-leds"; + + led0 { + label = "beaglebone:green:usr0"; + gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led1 { + label = "beaglebone:green:usr1"; + gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led2 { + label = "beaglebone:green:usr2"; + gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "cpu"; + default-state = "off"; + }; + + led3 { + label = "beaglebone:green:usr3"; + gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + + led4 { + label = "beaglebone:green:usr4"; + gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "netdev"; + default-state = "off"; + }; + }; + + hdmi_conn: connector@0 { + compatible = "hdmi-connector"; + label = "hdmi"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_encoder_out>; + }; + }; + }; + + hdmi_enc: encoder@0 { + /* "ti,tpd12s016" software compatible with "ti,tpd12s015" + * no need for individual driver + */ + compatible = "ti,tpd12s015"; + gpios = <0>, + <0>, + <&gpio7 12 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <0x1>; + #size-cells = <0x0>; + + port@0 { + reg = <0x0>; + + hdmi_encoder_in: endpoint@0 { + remote-endpoint = <&hdmi_out>; + }; + }; + + port@1 { + reg = <0x1>; + + hdmi_encoder_out: endpoint@0 { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; + + emmc_pwrseq: emmc_pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio5 7 GPIO_ACTIVE_LOW>; + }; + + brcmf_pwrseq: brcmf_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>, /* BT-REG-ON */ + <&gpio3 18 GPIO_ACTIVE_LOW>; /* WL-REG-ON */ + }; + + extcon_usb1: extcon_usb1 { + compatible = "linux,extcon-usb-gpio"; + ti,enable-id-detection; + id-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>; + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + tps659038: tps659038@58 { + compatible = "ti,tps659038"; + reg = <0x58>; + interrupt-parent = <&gpio6>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + + #interrupt-cells = <2>; + interrupt-controller; + + ti,system-power-controller; + ti,palmas-override-powerhold; + + tps659038_pmic { + compatible = "ti,tps659038-pmic"; + + smps12-in-supply = <&vdd_5v>; + smps3-in-supply = <&vdd_5v>; + smps45-in-supply = <&vdd_5v>; + smps6-in-supply = <&vdd_5v>; + smps7-in-supply = <&vdd_5v>; + mps3-in-supply = <&vdd_5v>; + smps8-in-supply = <&vdd_5v>; + smps9-in-supply = <&vdd_5v>; + ldo1-in-supply = <&vdd_5v>; + ldo2-in-supply = <&vdd_5v>; + ldo3-in-supply = <&vdd_5v>; + ldo4-in-supply = <&vdd_5v>; + ldo9-in-supply = <&vdd_5v>; + ldoln-in-supply = <&vdd_5v>; + ldousb-in-supply = <&vdd_5v>; + ldortc-in-supply = <&vdd_5v>; + + regulators { + vdd_mpu: smps12 { + /* VDD_MPU */ + regulator-name = "smps12"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_ddr: smps3 { + /* VDD_DDR EMIF1 EMIF2 */ + regulator-name = "smps3"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_dspeve: smps45 { + /* VDD_DSPEVE on AM572 */ + regulator-name = "smps45"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_gpu: smps6 { + /* VDD_GPU */ + regulator-name = "smps6"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_core: smps7 { + /* VDD_CORE */ + regulator-name = "smps7"; + regulator-min-microvolt = < 850000>; /*** 1.15V */ + regulator-max-microvolt = <1150000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_iva: smps8 { + /* VDD_IVAHD */ /*** 1.06V */ + regulator-name = "smps8"; + }; + + vdd_3v3: smps9 { + /* VDD_3V3 */ + regulator-name = "smps9"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_sd: ldo1 { + /* VDDSHV8 - VSDMMC */ + regulator-name = "ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd_1v8: ldo2 { + /* VDDSH18V */ + regulator-name = "ldo2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v8_phy_ldo3: ldo3 { + /* R1.3a 572x V1_8PHY_LDO3: USB, SATA */ + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v8_phy_ldo4: ldo4 { + /* R1.3a 572x V1_8PHY_LDO4: PCIE, HDMI*/ + regulator-name = "ldo4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + /* LDO5-8 unused */ + + vdd_rtc: ldo9 { + /* VDD_RTC */ + regulator-name = "ldo9"; + regulator-min-microvolt = < 840000>; + regulator-max-microvolt = <1160000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v8_pll: ldoln { + /* VDDA_1V8_PLL */ + regulator-name = "ldoln"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldousb_reg: ldousb { + /* VDDA_3V_USB: VDDA_USBHS33 */ + regulator-name = "ldousb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldortc_reg: ldortc { + /* VDDA_RTC */ + regulator-name = "ldortc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + regen1: regen1 { + /* VDD_3V3_ON */ + regulator-name = "regen1"; + regulator-boot-on; + regulator-always-on; + }; + + regen2: regen2 { + /* Needed for PMIC internal resource */ + regulator-name = "regen2"; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + tps659038_rtc: tps659038_rtc { + compatible = "ti,palmas-rtc"; + interrupt-parent = <&tps659038>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + }; + + tps659038_pwr_button: tps659038_pwr_button { + compatible = "ti,palmas-pwrbutton"; + interrupt-parent = <&tps659038>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + ti,palmas-long-press-seconds = <12>; + }; + + tps659038_gpio: tps659038_gpio { + compatible = "ti,palmas-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + /* STMPE811 touch screen controller */ + stmpe811@41 { + compatible = "st,stmpe811"; + reg = <0x41>; + interrupts = <30 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio2>; + interrupt-controller; + id = <0>; + blocks = <0x5>; + irq-trigger = <0x1>; + st,mod-12b = <1>; /* 12-bit ADC */ + st,ref-sel = <0>; /* internal ADC reference */ + st,adc-freq = <1>; /* 3.25 MHz ADC clock speed */ + st,sample-time = <4>; /* ADC converstion time: 80 clocks */ + + stmpe_adc { + compatible = "st,stmpe-adc"; + st,norequest-mask = <0x00>; /* mask any channels to be used by touchscreen */ + adc0: iio-device@0 { + #io-channel-cells = <1>; + iio-channels = <&adc0 4>, <&adc0 1>, <&adc0 2>, <&adc0 3>, <&adc0 4>, <&adc0 5>, <&adc0 6>; + iio-channel-names = "AIN0_P9_39", "AIN1_P9_40", "AIN2_P9_37", "AIN3_P9_38", + "AIN4_P9_33", "AIN5_P9_36", "AIN6_P9_35"; + }; + }; + + stmpe_touchscreen { + status = "disabled"; + compatible = "st,stmpe-ts"; + /* 8 sample average control */ + st,ave-ctrl = <3>; + /* 7 length fractional part in z */ + st,fraction-z = <7>; + /* + * 50 mA typical 80 mA max touchscreen drivers + * current limit value + */ + st,i-drive = <1>; + /* 1 ms panel driver settling time */ + st,settling = <3>; + /* 5 ms touch detect interrupt delay */ + st,touch-det-delay = <5>; + }; + + stmpe_gpio { + compatible = "st,stmpe-gpio"; + }; + + stmpe_pwm { + compatible = "st,stmpe-pwm"; + #pwm-cells = <2>; + }; + }; +}; + +&mcspi3 { + status = "okay"; + ti,pindir-d0-out-d1-in; + + sn65hvs882: sn65hvs882@0 { + compatible = "pisosr-gpio"; + gpio-controller; + #gpio-cells = <2>; + + reg = <0>; + spi-max-frequency = <1000000>; + spi-cpol; + }; +}; + +&cpu0 { + vdd-supply = <&vdd_mpu>; + voltage-tolerance = <1>; +}; + +&uart1 { + status = "okay"; +}; + +&davinci_mdio { + reset-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; + reset-delay-us = <2>; + + phy0: ethernet-phy@1 { + reg = <4>; + eee-broken-100tx; + eee-broken-1000t; + }; +}; + +&mac { + slaves = <1>; + status = "okay"; +}; + +&cpsw_emac0 { + phy-handle = <&phy0>; + phy-mode = "rgmii"; +}; + +&ocp { + pruss1_shmem: pruss_shmem@4b200000 { + status = "okay"; + compatible = "ti,pruss-shmem"; + reg = <0x4b200000 0x020000>; + }; + + pruss2_shmem: pruss_shmem@4b280000 { + status = "okay"; + compatible = "ti,pruss-shmem"; + reg = <0x4b280000 0x020000>; + }; +}; + +&mmc1 { + status = "okay"; + vmmc-supply = <&vdd_3v3>; + vqmmc-supply = <&vdd_sd>; + bus-width = <4>; + cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */ + + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_default>; +}; + +&mmc2 { + status = "okay"; + vmmc-supply = <&vdd_1v8>; + vqmmc-supply = <&vdd_1v8>; + bus-width = <8>; + ti,non-removable; + non-removable; + mmc-pwrseq = <&emmc_pwrseq>; + + ti,needs-special-reset; + dmas = <&sdma_xbar 47>, <&sdma_xbar 48>; + dma-names = "tx", "rx"; + +}; + +&mmc4 { + /* DS: Default speed (DS) up to 25 MHz, including 1- and 4-bit modes (3.3 V signaling). */ + /* HS: High speed up to 50 MHz (3.3 V signaling). */ + /* SDR12: SDR up to 25 MHz (1.8 V signaling). */ + /* SDR25: SDR up to 50 MHz (1.8 V signaling). */ + /* SDR50: SDR up to 100 MHz (1.8 V signaling). */ + /* SDR104: SDR up to 208 MHz (1.8 V signaling) */ + /* DDR50: DDR up to 50 MHz (1.8 V signaling). */ + status = "okay"; + + ti,needs-special-reset; + vmmc-supply = <&vdd_3v3>; + cap-power-off-card; + keep-power-in-suspend; + bus-width = <4>; + ti,non-removable; + non-removable; + no-1-8-v; + max-frequency = <24000000>; + + #address-cells = <1>; + #size-cells = <0>; + mmc-pwrseq = <&brcmf_pwrseq>; + + brcmf: wifi@1 { + status = "okay"; + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + + brcm,sd-head-align = <4>; + brcm,sd_head_align = <4>; + brcm,sd_sgentry_align = <512>; + + interrupt-parent = <&gpio3>; + interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "host-wake"; + }; +}; + +&usb2_phy1 { + phy-supply = <&ldousb_reg>; +}; + +&usb2_phy2 { + phy-supply = <&ldousb_reg>; +}; + +&usb1 { + status = "okay"; + dr_mode = "otg"; +}; + +&omap_dwc3_1 { + extcon = <&extcon_usb1>; +}; + +&usb2 { + status = "okay"; + dr_mode = "host"; +}; + +&dss { + status = "okay"; + vdda_video-supply = <&vdd_1v8_pll>; +}; + +&hdmi { + status = "okay"; + vdda-supply = <&vdd_1v8_phy_ldo4>; + + port { + hdmi_out: endpoint { + remote-endpoint = <&hdmi_encoder_in>; + }; + }; +}; + +&bandgap { + status = "okay"; +}; + +&mailbox1 { + status = "okay"; +}; + +&mailbox2 { + status = "okay"; +}; + +&mailbox3 { + status = "okay"; +}; + +&mailbox4 { + status = "okay"; +}; + +&mailbox5 { + status = "okay"; +}; + +&mailbox6 { + status = "okay"; +}; + +&mailbox7 { + status = "okay"; +}; + +&mailbox8 { + status = "okay"; +}; + +&mailbox9 { + status = "okay"; +}; + +&mailbox10 { + status = "okay"; +}; + +&mailbox11 { + status = "okay"; +}; + +&mailbox12 { + status = "okay"; +}; + +&mailbox13 { + status = "okay"; +}; + +&cpu_alert0 { + temperature = <55000>; /* milliCelsius */ +}; + +&cpu_crit { + temperature = <85000>; /* milliCelsius */ +}; + +&gpu_crit { + temperature = <85000>; /* milliCelsius */ +}; + +&core_crit { + temperature = <85000>; /* milliCelsius */ +}; + +&dspeve_crit { + temperature = <85000>; /* milliCelsius */ +}; + +&iva_crit { + temperature = <85000>; /* milliCelsius */ +}; + +&sata { + status = "disabled"; +}; + +&sata_phy { + status = "disabled"; +}; + +/* bluetooth */ +&uart6 { + status = "okay"; +}; + +/* cape header stuff */ +&i2c4 { + status = "okay"; + clock-frequency = <100000>; +}; + +&cpu0_opp_table { + opp_slow-500000000 { + opp-shared; + }; +}; diff --git a/arch/arm/boot/dts/am572x-idk-common.dtsi b/arch/arm/boot/dts/am572x-idk-common.dtsi index ddf123620e96..37ce2d7c4173 100644 --- a/arch/arm/boot/dts/am572x-idk-common.dtsi +++ b/arch/arm/boot/dts/am572x-idk-common.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include "am57xx-idk-common.dtsi" +#include "dra74-ipu-dsp-common.dtsi" / { memory@0 { @@ -13,6 +14,40 @@ reg = <0x0 0x80000000 0x0 0x80000000>; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ipu2_memory_region: ipu2-memory@95800000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x95800000 0x0 0x3800000>; + reusable; + status = "okay"; + }; + + dsp1_memory_region: dsp1-memory@99000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x99000000 0x0 0x4000000>; + reusable; + status = "okay"; + }; + + ipu1_memory_region: ipu1-memory@9d000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x9d000000 0x0 0x2000000>; + reusable; + status = "okay"; + }; + + dsp2_memory_region: dsp2-memory@9f000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x9f000000 0x0 0x800000>; + reusable; + status = "okay"; + }; + }; + status-leds { compatible = "gpio-leds"; cpu0-led { @@ -147,22 +182,22 @@ gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; }; -&mailbox5 { +&ipu2 { status = "okay"; - mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { - status = "okay"; - }; - mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { - status = "okay"; - }; + memory-region = <&ipu2_memory_region>; }; -&mailbox6 { +&ipu1 { status = "okay"; - mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { - status = "okay"; - }; - mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { - status = "okay"; - }; + memory-region = <&ipu1_memory_region>; +}; + +&dsp1 { + status = "okay"; + memory-region = <&dsp1_memory_region>; +}; + +&dsp2 { + status = "okay"; + memory-region = <&dsp2_memory_region>; }; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi index 565675354de4..94135fc5dd44 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi +++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi @@ -7,6 +7,7 @@ #include "am5728.dtsi" #include "am57xx-commercial-grade.dtsi" #include "dra74x-mmc-iodelay.dtsi" +#include "dra74-ipu-dsp-common.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -50,6 +51,40 @@ regulator-boot-on; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ipu2_memory_region: ipu2-memory@95800000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x95800000 0x0 0x3800000>; + reusable; + status = "okay"; + }; + + dsp1_memory_region: dsp1-memory@99000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x99000000 0x0 0x4000000>; + reusable; + status = "okay"; + }; + + ipu1_memory_region: ipu1-memory@9d000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x9d000000 0x0 0x2000000>; + reusable; + status = "okay"; + }; + + dsp2_memory_region: dsp2-memory@9f000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x9f000000 0x0 0x800000>; + reusable; + status = "okay"; + }; + }; + vdd_3v3: fixedregulator-vdd_3v3 { compatible = "regulator-fixed"; regulator-name = "vdd_3v3"; @@ -584,22 +619,22 @@ rx-num-evt = <32>; }; -&mailbox5 { +&ipu2 { status = "okay"; - mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { - status = "okay"; - }; - mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { - status = "okay"; - }; + memory-region = <&ipu2_memory_region>; }; -&mailbox6 { +&ipu1 { status = "okay"; - mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { - status = "okay"; - }; - mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { - status = "okay"; - }; + memory-region = <&ipu1_memory_region>; +}; + +&dsp1 { + status = "okay"; + memory-region = <&dsp1_memory_region>; +}; + +&dsp2 { + status = "okay"; + memory-region = <&dsp2_memory_region>; }; diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi index a3ff1237d1fa..2c0aab352b44 100644 --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -35,6 +35,16 @@ regulator-boot-on; }; + v1_2d: fixedregulator-v1_2d { + compatible = "regulator-fixed"; + regulator-name = "V1_2D"; + vin-supply = <&vmain>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + vtt_fixed: fixedregulator-vtt { /* TPS51200 */ compatible = "regulator-fixed"; @@ -139,6 +149,12 @@ }; }; }; + + src_clk_x1: src_clk_x1 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <20000000>; + }; }; &dra7_pmx_core { @@ -378,6 +394,32 @@ gpio-controller; #gpio-cells = <2>; }; + + dsi_bridge: tc358778@e { + compatible = "toshiba,tc358778", "toshiba,tc358768"; + reg = <0xe>; + status = "disabled"; + + clocks = <&src_clk_x1>; + clock-names = "refclk"; + + vddc-supply = <&v1_2d>; + vddmipi-supply = <&v1_2d>; + vddio-supply = <&v3_3d>; + + dsi_bridge_ports: ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + rgb_in: endpoint { + remote-endpoint = <&dpi_out>; + data-lines = <24>; + }; + }; + }; + }; }; &mcspi3 { @@ -543,4 +585,20 @@ &dss { status = "okay"; + + vdda_video-supply = <&ldoln_reg>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dpi_out: endpoint { + remote-endpoint = <&rgb_in>; + data-lines = <24>; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index c15f5e92f97f..0b8c2a64b36f 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -114,7 +114,6 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <31>; - timeout-ms = <1000>; clocks = <&coreclk 0>; status = "disabled"; }; @@ -124,7 +123,6 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <32>; - timeout-ms = <1000>; clocks = <&coreclk 0>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi index 2932a29ae272..9805e507c695 100644 --- a/arch/arm/boot/dts/armada-375.dtsi +++ b/arch/arm/boot/dts/armada-375.dtsi @@ -236,7 +236,6 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; - timeout-ms = <1000>; clocks = <&coreclk 0>; status = "disabled"; }; @@ -247,7 +246,6 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; - timeout-ms = <1000>; clocks = <&coreclk 0>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index e038abc0c6b4..348116501aa2 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -153,7 +153,6 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; - timeout-ms = <1000>; clocks = <&coreclk 0>; status = "disabled"; }; @@ -164,7 +163,6 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; - timeout-ms = <1000>; clocks = <&coreclk 0>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi index b1b86934c688..e0b7c2099831 100644 --- a/arch/arm/boot/dts/armada-39x.dtsi +++ b/arch/arm/boot/dts/armada-39x.dtsi @@ -108,7 +108,6 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; - timeout-ms = <1000>; clocks = <&coreclk 0>; status = "disabled"; }; @@ -119,7 +118,6 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; - timeout-ms = <1000>; clocks = <&coreclk 0>; status = "disabled"; }; @@ -130,7 +128,6 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; - timeout-ms = <1000>; clocks = <&coreclk 0>; status = "disabled"; }; @@ -141,7 +138,6 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; - timeout-ms = <1000>; clocks = <&coreclk 0>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts index 4afa8662c4e8..8d0f4656aa05 100644 --- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts +++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts @@ -213,3 +213,7 @@ &i2c15 { status = "okay"; }; + +&fsim0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts index 5d7cbd9164d4..2d44d9ad4e40 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts @@ -5,6 +5,7 @@ #include "aspeed-g5.dtsi" #include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/i2c/i2c.h> / { model = "Facebook TiogaPass BMC"; @@ -112,13 +113,76 @@ &kcs2 { // BMC KCS channel 2 status = "okay"; - kcs_addr = <0xca8>; + aspeed,lpc-io-reg = <0xca8>; }; &kcs3 { // BMC KCS channel 3 status = "okay"; - kcs_addr = <0xca2>; + aspeed,lpc-io-reg = <0xca2>; +}; + +&gpio { + status = "okay"; + gpio-line-names = + /*A0-A7*/ "BMC_CPLD_FPGA_SEL","","","","","","","", + /*B0-B7*/ "","BMC_DEBUG_EN","","","","BMC_PPIN","PS_PWROK", + "IRQ_PVDDQ_GHJ_VRHOT_LVT3", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "BIOS_MRC_DEBUG_MSG_DIS","BOARD_REV_ID0","", + "BOARD_REV_ID1","IRQ_DIMM_SAVE_LVT3","BOARD_REV_ID2", + "CPU_ERR0_LVT3_BMC","CPU_ERR1_LVT3_BMC", + /*E0-E7*/ "RESET_BUTTON","RESET_OUT","POWER_BUTTON", + "POWER_OUT","NMI_BUTTON","","CPU0_PROCHOT_LVT3_ BMC", + "CPU1_PROCHOT_LVT3_ BMC", + /*F0-F7*/ "IRQ_PVDDQ_ABC_VRHOT_LVT3","", + "IRQ_PVCCIN_CPU0_VRHOT_LVC3", + "IRQ_PVCCIN_CPU1_VRHOT_LVC3", + "IRQ_PVDDQ_KLM_VRHOT_LVT3","","P3VBAT_BRIDGE_EN","", + /*G0-G7*/ "CPU_ERR2_LVT3","CPU_CATERR_LVT3","PCH_BMC_THERMTRIP", + "CPU0_SKTOCC_LVT3","","","","BIOS_SMI_ACTIVE", + /*H0-H7*/ "LED_POST_CODE_0","LED_POST_CODE_1","LED_POST_CODE_2", + "LED_POST_CODE_3","LED_POST_CODE_4","LED_POST_CODE_5", + "LED_POST_CODE_6","LED_POST_CODE_7", + /*I0-I7*/ "CPU0_FIVR_FAULT_LVT3","CPU1_FIVR_FAULT_LVT3", + "FORCE_ADR","UV_ADR_TRIGGER_EN","","","","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "IRQ_UV_DETECT","IRQ_OC_DETECT","HSC_TIMER_EXP","", + "MEM_THERM_EVENT_PCH","PMBUS_ALERT_BUF_EN","","", + /*M0-M7*/ "CPU0_RC_ERROR","CPU1_RC_ERROR","","OC_DETECT_EN", + "CPU0_THERMTRIP_LATCH_LVT3", + "CPU1_THERMTRIP_LATCH_LVT3","","", + /*N0-N7*/ "","","","CPU_MSMI_LVT3","","BIOS_SPI_BMC_CTRL","","", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "BOARD_SKU_ID0","BOARD_SKU_ID1","BOARD_SKU_ID2", + "BOARD_SKU_ID3","BOARD_SKU_ID4","BMC_PREQ", + "BMC_PWR_DEBUG","RST_RSMRST", + /*Q0-Q7*/ "","","","","UARTSW_LSB","UARTSW_MSB", + "POST_CARD_PRES_BMC","PE_BMC_WAKE", + /*R0-R7*/ "","","BMC_TCK_MUX_SEL","BMC_PRDY", + "BMC_XDP_PRSNT_IN","RST_BMC_PLTRST_BUF","SLT_CFG0", + "SLT_CFG1", + /*S0-S7*/ "THROTTLE","BMC_READY","","HSC_SMBUS_SWITCH_EN","", + "","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","BMC_FAULT","","", + /*V0-V7*/ "","","","FAST_PROCHOT_EN","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","GLOBAL_RST_WARN", + "CPU0_MEMABC_MEMHOT_LVT3_BMC", + "CPU0_MEMDEF_MEMHOT_LVT3_BMC", + "CPU1_MEMGHJ_MEMHOT_LVT3_BMC", + "CPU1_MEMKLM_MEMHOT_LVT3_BMC", + /*Y0-Y7*/ "SIO_S3","SIO_S5","BMC_JTAG_SEL","SIO_ONCONTROL","", + "","","", + /*Z0-Z7*/ "","SIO_POWER_GOOD","IRQ_PVDDQ_DEF_VRHOT_LVT3","", + "","","","", + /*AA0-AA7*/ "CPU1_SKTOCC_LVT3","IRQ_SML1_PMBUS_ALERT", + "SERVER_POWER_LED","","PECI_MUX_SELECT","UV_HIGH_SET", + "","POST_COMPLETE", + /*AB0-AB7*/ "IRQ_HSC_FAULT","OCP_MEZZA_PRES","","","","","","", + /*AC0-AC7*/ "","","","","","","",""; }; &mac0 { @@ -368,6 +432,11 @@ &i2c4 { status = "okay"; // BMC Debug Header + ipmb0@10 { + compatible = "ipmb-dev"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + i2c-protocol; + }; }; &i2c5 { @@ -449,6 +518,11 @@ &i2c9 { status = "okay"; //USB Debug Connector + ipmb0@10 { + compatible = "ipmb-dev"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + i2c-protocol; + }; }; &pwm_tacho { diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts new file mode 100644 index 000000000000..8864e9c312a8 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts @@ -0,0 +1,231 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright (c) 2018 Facebook Inc. +/dts-v1/; +#include "aspeed-g5.dtsi" +#include <dt-bindings/i2c/i2c.h> + +/ { + model = "Facebook Yosemitev2 BMC"; + compatible = "facebook,yosemitev2-bmc", "aspeed,ast2500"; + aliases { + serial4 = &uart5; + }; + chosen { + stdout-path = &uart5; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + iio-hwmon { + // VOLATAGE SENSOR + compatible = "iio-hwmon"; + io-channels = <&adc 0> , <&adc 1> , <&adc 2> , <&adc 3> , + <&adc 4> , <&adc 5> , <&adc 6> , <&adc 7> , + <&adc 8> , <&adc 9> , <&adc 10>, <&adc 11> , + <&adc 12> , <&adc 13> , <&adc 14> , <&adc 15> ; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + }; +}; +&uart1 { + // Host1 Console + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default>; +}; + +&uart2 { + // Host2 Console + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default + &pinctrl_rxd2_default>; + +}; + +&uart3 { + // Host3 Console + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd3_default + &pinctrl_rxd3_default>; +}; + +&uart4 { + // Host4 Console + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd4_default + &pinctrl_rxd4_default>; +}; + +&uart5 { + // BMC Console + status = "okay"; +}; + +&vuart { + // Virtual UART + status = "okay"; +}; + +&mac0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + use-ncsi; + mlx,multi-host; +}; + +&adc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default + &pinctrl_adc1_default + &pinctrl_adc2_default + &pinctrl_adc3_default + &pinctrl_adc4_default + &pinctrl_adc5_default + &pinctrl_adc6_default + &pinctrl_adc7_default + &pinctrl_adc8_default + &pinctrl_adc9_default + &pinctrl_adc10_default + &pinctrl_adc11_default + &pinctrl_adc12_default + &pinctrl_adc13_default + &pinctrl_adc14_default + &pinctrl_adc15_default>; +}; + +&i2c1 { + //Host1 IPMB bus + status = "okay"; + multi-master; + ipmb1@10 { + compatible = "ipmb-dev"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + i2c-protocol; + }; +}; + +&i2c3 { + //Host2 IPMB bus + status = "okay"; + multi-master; + ipmb3@10 { + compatible = "ipmb-dev"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + i2c-protocol; + }; +}; + +&i2c5 { + //Host3 IPMB bus + status = "okay"; + multi-master; + ipmb5@10 { + compatible = "ipmb-dev"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + i2c-protocol; + }; +}; + +&i2c7 { + //Host4 IPMB bus + status = "okay"; + multi-master; + ipmb7@10 { + compatible = "ipmb-dev"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + i2c-protocol; + }; +}; + +&i2c8 { + status = "okay"; + //FRU EEPROM + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + pagesize = <32>; + }; +}; + +&i2c9 { + status = "okay"; + tmp421@4e { + //INLET TEMP + compatible = "ti,tmp421"; + reg = <0x4e>; + }; + //OUTLET TEMP + tmp421@4f { + compatible = "ti,tmp421"; + reg = <0x4f>; + }; +}; + +&i2c10 { + status = "okay"; + //HSC + adm1278@40 { + compatible = "adi,adm1278"; + reg = <0x40>; + }; +}; + +&i2c11 { + status = "okay"; + //MEZZ_TEMP_SENSOR + tmp421@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; +}; + +&i2c12 { + status = "okay"; + //MEZZ_FRU + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + pagesize = <32>; + }; +}; + +&pwm_tacho { + status = "okay"; + //FSC + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>; + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00>; + }; + fan@1 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x01>; + }; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts index 6232cd726a7f..bdfe342bf7c5 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts @@ -4,6 +4,7 @@ #include "aspeed-g6.dtsi" #include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/leds/leds-pca955x.h> / { model = "Rainier"; @@ -32,6 +33,11 @@ no-map; reg = <0xB8000000 0x04000000>; /* 64M */ }; + + vga_memory: region@bf000000 { + no-map; + reg = <0xbf000000 0x01000000>; /* 16M */ + }; }; gpio-keys { @@ -64,6 +70,40 @@ }; +&gpio0 { + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "","","","","","","","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "","","","","","","","", + /*F0-F7*/ "","","","","","","","", + /*G0-G7*/ "","","","","","","","", + /*H0-H7*/ "","","","","","","","", + /*I0-I7*/ "","","","","","","","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "","","","","","","","", + /*Q0-Q7*/ "cfam-reset","","","","","","","", + /*R0-R7*/ "","","","","","","","", + /*S0-S7*/ "presence-ps0","presence-ps1","presence-ps2","presence-ps3", + "","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","","", + /*AA0-AA7*/ "","","","","","","","", + /*AB0-AB7*/ "","","","","","","","", + /*AC0-AC7*/ "","","","","","","",""; +}; + &emmc_controller { status = "okay"; }; @@ -72,6 +112,88 @@ status = "okay"; }; +&fsim0 { + status = "okay"; + + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom@1000 { + compatible = "ibm,fsi2pib"; + reg = <0x1000 0x400>; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + fsi_occ0: occ { + compatible = "ibm,p9-occ"; + }; + }; + + fsi_hub0: hub@3400 { + compatible = "fsi-master-hub"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + + no-scan-on-init; + }; + }; +}; + +&fsi_hub0 { + cfam@1,0 { + reg = <1 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <1>; + + scom@1000 { + compatible = "ibm,fsi2pib"; + reg = <0x1000 0x400>; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + fsi_occ1: occ { + compatible = "ibm,p9-occ"; + }; + }; + + fsi_hub1: hub@3400 { + compatible = "fsi-master-hub"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + + no-scan-on-init; + }; + }; +}; + +/* Legacy OCC numbering (to get rid of when userspace is fixed) */ +&fsi_occ0 { + reg = <1>; +}; + +&fsi_occ1 { + reg = <2>; +}; + &ibt { status = "okay"; }; @@ -269,66 +391,82 @@ gpio@0 { reg = <0>; + type = <PCA955X_TYPE_GPIO>; }; gpio@1 { reg = <1>; + type = <PCA955X_TYPE_GPIO>; }; gpio@2 { reg = <2>; + type = <PCA955X_TYPE_GPIO>; }; gpio@3 { reg = <3>; + type = <PCA955X_TYPE_GPIO>; }; gpio@4 { reg = <4>; + type = <PCA955X_TYPE_GPIO>; }; gpio@5 { reg = <5>; + type = <PCA955X_TYPE_GPIO>; }; gpio@6 { reg = <6>; + type = <PCA955X_TYPE_GPIO>; }; gpio@7 { reg = <7>; + type = <PCA955X_TYPE_GPIO>; }; gpio@8 { reg = <8>; + type = <PCA955X_TYPE_GPIO>; }; gpio@9 { reg = <9>; + type = <PCA955X_TYPE_GPIO>; }; gpio@10 { reg = <10>; + type = <PCA955X_TYPE_GPIO>; }; gpio@11 { reg = <11>; + type = <PCA955X_TYPE_GPIO>; }; gpio@12 { reg = <12>; + type = <PCA955X_TYPE_GPIO>; }; gpio@13 { reg = <13>; + type = <PCA955X_TYPE_GPIO>; }; gpio@14 { reg = <14>; + type = <PCA955X_TYPE_GPIO>; }; gpio@15 { reg = <15>; + type = <PCA955X_TYPE_GPIO>; }; }; @@ -386,21 +524,6 @@ &i2c9 { status = "okay"; - ir35221@42 { - compatible = "infineon,ir35221"; - reg = <0x42>; - }; - - ir35221@43 { - compatible = "infineon,ir35221"; - reg = <0x43>; - }; - - ir35221@44 { - compatible = "infineon,ir35221"; - reg = <0x44>; - }; - tmp423a@4c { compatible = "ti,tmp423"; reg = <0x4c>; @@ -411,21 +534,6 @@ reg = <0x4d>; }; - ir35221@72 { - compatible = "infineon,ir35221"; - reg = <0x72>; - }; - - ir35221@73 { - compatible = "infineon,ir35221"; - reg = <0x73>; - }; - - ir35221@74 { - compatible = "infineon,ir35221"; - reg = <0x74>; - }; - eeprom@50 { compatible = "atmel,24c128"; reg = <0x50>; @@ -435,21 +543,6 @@ &i2c10 { status = "okay"; - ir35221@42 { - compatible = "infineon,ir35221"; - reg = <0x42>; - }; - - ir35221@43 { - compatible = "infineon,ir35221"; - reg = <0x43>; - }; - - ir35221@44 { - compatible = "infineon,ir35221"; - reg = <0x44>; - }; - tmp423a@4c { compatible = "ti,tmp423"; reg = <0x4c>; @@ -460,21 +553,6 @@ reg = <0x4d>; }; - ir35221@72 { - compatible = "infineon,ir35221"; - reg = <0x72>; - }; - - ir35221@73 { - compatible = "infineon,ir35221"; - reg = <0x73>; - }; - - ir35221@74 { - compatible = "infineon,ir35221"; - reg = <0x74>; - }; - eeprom@50 { compatible = "atmel,24c128"; reg = <0x50>; @@ -540,6 +618,10 @@ status = "okay"; }; +&vuart2 { + status = "okay"; +}; + &lpc_ctrl { status = "okay"; memory-region = <&flash_memory>; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts index f7e935ede919..60e545b6396f 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts @@ -8,6 +8,52 @@ model = "Mihawk BMC"; compatible = "ibm,mihawk-bmc", "aspeed,ast2500"; + aliases { + i2c215 = &bus6_mux215; + i2c216 = &bus6_mux216; + i2c217 = &bus6_mux217; + i2c218 = &bus6_mux218; + i2c219 = &bus6_mux219; + i2c220 = &bus6_mux220; + i2c221 = &bus6_mux221; + i2c222 = &bus6_mux222; + i2c223 = &bus7_mux223; + i2c224 = &bus7_mux224; + i2c225 = &bus7_mux225; + i2c226 = &bus7_mux226; + i2c227 = &bus7_mux227; + i2c228 = &bus7_mux228; + i2c229 = &bus7_mux229; + i2c230 = &bus7_mux230; + i2c231 = &bus9_mux231; + i2c232 = &bus9_mux232; + i2c233 = &bus9_mux233; + i2c234 = &bus9_mux234; + i2c235 = &bus9_mux235; + i2c236 = &bus9_mux236; + i2c237 = &bus9_mux237; + i2c238 = &bus9_mux238; + i2c239 = &bus10_mux239; + i2c240 = &bus10_mux240; + i2c241 = &bus10_mux241; + i2c242 = &bus10_mux242; + i2c243 = &bus10_mux243; + i2c244 = &bus10_mux244; + i2c245 = &bus10_mux245; + i2c246 = &bus10_mux246; + i2c247 = &bus12_mux247; + i2c248 = &bus12_mux248; + i2c249 = &bus12_mux249; + i2c250 = &bus12_mux250; + i2c251 = &bus13_mux251; + i2c252 = &bus13_mux252; + i2c253 = &bus13_mux253; + i2c254 = &bus13_mux254; + i2c255 = &bus13_mux255; + i2c256 = &bus13_mux256; + i2c257 = &bus13_mux257; + i2c258 = &bus13_mux258; + }; chosen { stdout-path = &uart5; @@ -120,35 +166,24 @@ leds { compatible = "gpio-leds"; - fault { + front-fault { retain-state-shutdown; default-state = "keep"; gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>; }; - power { + power-button { retain-state-shutdown; default-state = "keep"; gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_LOW>; }; - rear-id { + front-id { retain-state-shutdown; default-state = "keep"; gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>; }; - rear-g { - retain-state-shutdown; - default-state = "keep"; - gpios = <&gpio ASPEED_GPIO(AA, 4) GPIO_ACTIVE_LOW>; - }; - - rear-ok { - retain-state-shutdown; - default-state = "keep"; - gpios = <&gpio ASPEED_GPIO(Y, 0) GPIO_ACTIVE_LOW>; - }; fan0 { retain-state-shutdown; @@ -630,6 +665,54 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x70>; + + bus7_mux223: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + bus7_mux224: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + bus7_mux225: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + bus7_mux226: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + bus7_mux227: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + bus7_mux228: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + bus7_mux229: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + bus7_mux230: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; }; }; @@ -644,6 +727,54 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x70>; + + bus6_mux215: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + bus6_mux216: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + bus6_mux217: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + bus6_mux218: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + bus6_mux219: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + bus6_mux220: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + bus6_mux221: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + bus6_mux222: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; }; }; @@ -684,6 +815,30 @@ i2c-mux-idle-disconnect; interrupt-controller; #interrupt-cells = <2>; + + bus9_mux231: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + bus9_mux232: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + bus9_mux233: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + bus9_mux234: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; }; pca9545@71 { @@ -695,6 +850,30 @@ i2c-mux-idle-disconnect; interrupt-controller; #interrupt-cells = <2>; + + bus9_mux235: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + bus9_mux236: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + bus9_mux237: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + bus9_mux238: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; }; }; @@ -725,6 +904,30 @@ i2c-mux-idle-disconnect; interrupt-controller; #interrupt-cells = <2>; + + bus10_mux239: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + bus10_mux240: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + bus10_mux241: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + bus10_mux242: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; }; pca9545@71 { @@ -736,6 +939,30 @@ i2c-mux-idle-disconnect; interrupt-controller; #interrupt-cells = <2>; + + bus10_mux243: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + bus10_mux244: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + bus10_mux245: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + bus10_mux246: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; }; }; @@ -796,7 +1023,7 @@ interrupt-controller; #interrupt-cells = <2>; - i2c@0 { + bus12_mux247: i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; @@ -807,7 +1034,7 @@ }; }; - i2c@1 { + bus12_mux248: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; @@ -818,7 +1045,7 @@ }; }; - i2c@2 { + bus12_mux249: i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; @@ -829,7 +1056,7 @@ }; }; - i2c@3 { + bus12_mux250: i2c@3 { #address-cells = <1>; #size-cells = <0>; reg = <3>; @@ -857,6 +1084,53 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x70>; + bus13_mux251: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + bus13_mux252: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + bus13_mux253: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + bus13_mux254: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + bus13_mux255: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + bus13_mux256: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + bus13_mux257: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + bus13_mux258: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; }; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts b/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts new file mode 100644 index 000000000000..91dced7e7849 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts @@ -0,0 +1,326 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright 2019 YADRO +/dts-v1/; +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "Nicole BMC"; + compatible = "yadro,nicole-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vga_memory: framebuffer@9f000000 { + no-map; + reg = <0x9f000000 0x01000000>; /* 16M */ + }; + + flash_memory: region@98000000 { + no-map; + reg = <0x98000000 0x04000000>; /* 64M */ + }; + + coldfire_memory: codefire_memory@9ef00000 { + reg = <0x9ef00000 0x00100000>; + no-map; + }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + + video_engine_memory: jpegbuffer { + size = <0x02000000>; /* 32M */ + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + leds { + compatible = "gpio-leds"; + + power { + label = "platform:green:power"; + gpios = <&gpio ASPEED_GPIO(AA, 4) GPIO_ACTIVE_HIGH>; + }; + + identify { + label = "platform:blue:indicator"; + gpios = <&gpio ASPEED_GPIO(AA, 7) GPIO_ACTIVE_HIGH>; + }; + + fault { + label = "platform:red:fault"; + gpios = <&gpio ASPEED_GPIO(AA, 3) GPIO_ACTIVE_HIGH>; + }; + + attention { + label = "platform:yellow:alarm"; + gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_HIGH>; + }; + }; + + fsi: gpio-fsi { + compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master"; + #address-cells = <2>; + #size-cells = <0>; + no-gpio-delays; + + memory-region = <&coldfire_memory>; + aspeed,sram = <&sram>; + aspeed,cvic = <&cvic>; + + clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>; + data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>; + mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>; + trans-gpios = <&gpio ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + checkstop { + label = "checkstop"; + gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(J, 2)>; + }; + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 12>; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + spi-max-frequency = <100000000>; + }; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi1>; +}; + +&uart1 { + /* Rear RS-232 connector */ + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_nrts1_default + &pinctrl_ndtr1_default + &pinctrl_ndsr1_default + &pinctrl_ncts1_default + &pinctrl_ndcd1_default + &pinctrl_nri1_default>; +}; + +&uart5 { + status = "okay"; +}; + +&mac0 { + status = "okay"; + + use-ncsi; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; +}; + +&i2c0 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + pagesize = <64>; + }; +}; + +&i2c2 { + status = "okay"; + /* CPU0 characterization connector */ +}; + +&i2c3 { + status = "okay"; + /* CLK GEN SI5338 */ +}; + +&i2c4 { + status = "okay"; + /* Voltage regulators for CPU0 */ +}; + +&i2c5 { + status = "okay"; + /* Voltage regulators for CPU1 */ +}; + +&i2c6 { + status = "okay"; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; +}; + +&i2c7 { + status = "okay"; + /* CPLD */ +}; + +&gpio { + gpio-line-names = + /*A0-A7*/ "","cfam-reset","","","","","fsi-mux","", + /*B0-B7*/ "","","","","","","","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "fsi-enable","bmc_power_up","sys_pwrok_buf", + "func_mode0","func_mode1","func_mode2","","", + /*E0-E7*/ "","ncsi_cfg","","","","","","", + /*F0-F7*/ "","","","","","","","", + /*G0-G7*/ "","","","","","","","", + /*H0-H7*/ "","","","","","","","", + /*I0-I7*/ "","","","","","","","", + /*J0-J7*/ "","","checkstop","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","power-button","","","","","", + /*P0-P7*/ "","fsi-trans","pm_rtc_adc_en","","","","","", + /*Q0-Q7*/ "","","","","","","","id-button", + /*R0-R7*/ "","software_pwrgood","","","","","","", + /*S0-S7*/ "","","","","","","","seq_cont", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","","", + /*AA0-AA7*/ "fsi-clock","led-attention","fsi-data","led-fault", + "led-power","","","led-identify", + /*AB0-AB7*/ "","","","","","","","", + /*AC0-AC7*/ "","","","","","","",""; + + func_mode0 { + gpio-hog; + gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>; + output-low; + }; + func_mode1 { + gpio-hog; + gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>; + output-low; + }; + func_mode2 { + gpio-hog; + gpios = <ASPEED_GPIO(D, 5) GPIO_ACTIVE_HIGH>; + output-low; + }; + seq_cont { + gpio-hog; + gpios = <ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>; + output-low; + }; + ncsi_cfg { + gpio-hog; + input; + gpios = <ASPEED_GPIO(E, 1) GPIO_ACTIVE_HIGH>; + }; +}; + +&vuart { + status = "okay"; +}; + +&gfx { + status = "okay"; + memory-region = <&gfx_memory>; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&ibt { + status = "okay"; +}; + +&vhub { + status = "okay"; +}; + +&adc { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default + &pinctrl_adc1_default + &pinctrl_adc2_default + &pinctrl_adc3_default + &pinctrl_adc4_default + &pinctrl_adc5_default + &pinctrl_adc6_default + &pinctrl_adc7_default + &pinctrl_adc8_default + &pinctrl_adc9_default + &pinctrl_adc10_default + &pinctrl_adc11_default + &pinctrl_adc12_default + &pinctrl_adc13_default + &pinctrl_adc14_default + &pinctrl_adc15_default>; +}; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +#include "ibm-power9-dual.dtsi" diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts index edfa44fe1f75..fd2e014dae75 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts @@ -231,23 +231,52 @@ }; &gpio { + gpio-line-names = + /*A0-A7*/ "","cfam-reset","","","","","fsi-mux","", + /*B0-B7*/ "","","","","","","","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "fsi-enable","","","nic_func_mode0","nic_func_mode1","","","", + /*E0-E7*/ "","","","","","","","", + /*F0-F7*/ "","","","","","","","", + /*G0-G7*/ "","","","","","","","", + /*H0-H7*/ "","","","","","","","", + /*I0-I7*/ "","","","power-button","","","","", + /*J0-J7*/ "","","checkstop","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","led-fault","", + "led-identify","","","", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "","","","","","","","", + /*Q0-Q7*/ "","","","","","","","id-button", + /*R0-R7*/ "","","fsi-trans","","","led-power","","", + /*S0-S7*/ "","","","","","","","seq_cont", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","","", + /*AA0-AA7*/ "fsi-clock","","fsi-data","","","","","", + /*AB0-AB7*/ "","","","","","","","", + /*AC0-AC7*/ "","","","","","","",""; + nic_func_mode0 { gpio-hog; gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>; output-low; - line-name = "nic_func_mode0"; }; nic_func_mode1 { gpio-hog; gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>; output-low; - line-name = "nic_func_mode1"; }; seq_cont { gpio-hog; gpios = <ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>; output-low; - line-name = "seq_cont"; }; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts index ff49ec76fa7c..13c4aa02f4de 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts @@ -34,6 +34,59 @@ gpio-keys { compatible = "gpio-keys"; + checkstop { + label = "checkstop"; + gpios = <&gpio0 ASPEED_GPIO(E, 3) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(E, 3)>; + }; + + ps0-presence { + label = "ps0-presence"; + gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(H, 3)>; + }; + + ps1-presence { + label = "ps1-presence"; + gpios = <&gpio0 ASPEED_GPIO(E, 5) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(E, 5)>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <1000>; + + fan0-presence { + label = "fan0-presence"; + gpios = <&pca0 4 GPIO_ACTIVE_LOW>; + linux,code = <4>; + }; + + fan1-presence { + label = "fan1-presence"; + gpios = <&pca0 5 GPIO_ACTIVE_LOW>; + linux,code = <5>; + }; + + fan2-presence { + label = "fan2-presence"; + gpios = <&pca0 6 GPIO_ACTIVE_LOW>; + linux,code = <6>; + }; + + fan3-presence { + label = "fan3-presence"; + gpios = <&pca0 7 GPIO_ACTIVE_LOW>; + linux,code = <7>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + air-water { label = "air-water"; gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_LOW>; @@ -89,6 +142,49 @@ linux,code = <7>; }; }; + + iio-hwmon-dps310 { + compatible = "iio-hwmon"; + io-channels = <&dps 0>; + }; + + iio-hwmon-bmp280 { + compatible = "iio-hwmon"; + io-channels = <&bmp 1>; + }; +}; + +&gpio0 { + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "fsi-mux","","","","","","","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "power-button","","","checkstop","","presence-ps1","","led-rear-fault", + /*F0-F7*/ "","","","","","","","", + /*G0-G7*/ "","","","","","","","", + /*H0-H7*/ "","","","presence-ps0","","","","", + /*I0-I7*/ "","","","","","","","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "led-rear-power","led-rear-id","","","","","","", + /*P0-P7*/ "","","","","","","","", + /*Q0-Q7*/ "cfam-reset","","","","","","","fsi-routing", + /*R0-R7*/ "","","","","","","","", + /*S0-S7*/ "","","","","","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","","", + /*AA0-AA7*/ "","","","","","","","", + /*AB0-AB7*/ "","","","","","","","", + /*AC0-AC7*/ "","","","","","","",""; }; &fmc { @@ -132,6 +228,10 @@ use-ncsi; }; +&emmc_controller { + status = "okay"; +}; + &emmc { status = "okay"; }; @@ -142,6 +242,9 @@ #address-cells = <2>; #size-cells = <0>; + fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>; + fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>; + cfam@0,0 { reg = <0 0>; #address-cells = <1>; @@ -394,6 +497,11 @@ &i2c1 { status = "okay"; + + tpm: tpm@2e { + compatible = "tcg,tpm-tis-i2c"; + reg = <0x2e>; + }; }; &i2c2 { @@ -774,6 +882,10 @@ status = "okay"; }; +&vuart2 { + status = "okay"; +}; + &lpc_ctrl { status = "okay"; memory-region = <&flash_memory>; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts index 421aa600148b..a0f99e34ac8e 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts @@ -191,6 +191,40 @@ }; +&gpio { + gpio-line-names = + /*A0-A7*/ "","cfam-reset","","","","","fsi-mux","", + /*B0-B7*/ "","","","","","air-water","","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "fsi-enable","","","","","","","", + /*E0-E7*/ "fsi-data","","","","","","","", + /*F0-F7*/ "","","","","","","","", + /*G0-G7*/ "","","","","","","","", + /*H0-H7*/ "","","","","","","","", + /*I0-I7*/ "","","","","","","","", + /*J0-J7*/ "","","checkstop","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "presence-ps1","","led-rear-fault","led-rear-power", + "led-rear-id","","","", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "","","","","","","","presence-ps0", + /*Q0-Q7*/ "","","","","","","","", + /*R0-R7*/ "","","fsi-trans","","","power-button","","", + /*S0-S7*/ "","","","","","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","","", + /*AA0-AA7*/ "fsi-clock","","","","","","","", + /*AB0-AB7*/ "","","","","","","","", + /*AC0-AC7*/ "","","","","","","",""; +}; + &fmc { status = "okay"; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts index bc60ec291681..4bcc82046362 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts @@ -478,32 +478,61 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpioh_unbiased>; + gpio-line-names = + /*A0-A7*/ "","cfam-reset","","","","","","", + /*B0-B7*/ "","","","","","","","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "fsi-enable","","","","","led-sys-boot-status","led-attention", + "led-fault", + /*E0-E7*/ "","","","","","","","presence-pcie-e2b", + /*F0-F7*/ "","","","","","","","checkstop", + /*G0-G7*/ "fsi-clock","fsi-data","","","","","","", + /*H0-H7*/ "onewire0","onewire1","onewire2","onewire3","","","","", + /*I0-I7*/ "","","","power-button","","","","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","","","iso_u164_en","","fsi-trans","", + /*P0-P7*/ "ncsi_mux_en_n","bmc_i2c2_sw_rst_n","","bmc_i2c5_sw_rst_n","", + "","fsi-mux","", + /*Q0-Q7*/ "","","","","","","","", + /*R0-R7*/ "","","","","","","","", + /*S0-S7*/ "","","","","","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","","", + /*AA0-AA7*/ "","","led-hdd-fault","","","","","", + /*AB0-AB7*/ "","","","","","","","", + /*AC0-AC7*/ "","","","","","","",""; + line_iso_u146_en { gpio-hog; gpios = <ASPEED_GPIO(O, 4) GPIO_ACTIVE_HIGH>; output-high; - line-name = "iso_u164_en"; }; ncsi_mux_en_n { gpio-hog; gpios = <ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>; output-low; - line-name = "ncsi_mux_en_n"; }; line_bmc_i2c2_sw_rst_n { gpio-hog; gpios = <ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>; output-high; - line-name = "bmc_i2c2_sw_rst_n"; }; line_bmc_i2c5_sw_rst_n { gpio-hog; gpios = <ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>; output-high; - line-name = "bmc_i2c5_sw_rst_n"; }; }; diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index 8e04303e8514..82f0213e3a3c 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -219,6 +219,16 @@ reg = <0x1e720000 0x8000>; // 32K }; + video: video@1e700000 { + compatible = "aspeed,ast2400-video-engine"; + reg = <0x1e700000 0x1000>; + clocks = <&syscon ASPEED_CLK_GATE_VCLK>, + <&syscon ASPEED_CLK_GATE_ECLK>; + clock-names = "vclk", "eclk"; + interrupts = <7>; + status = "disabled"; + }; + sdmmc: sd-controller@1e740000 { compatible = "aspeed,ast2400-sd-controller"; reg = <0x1e740000 0x100>; diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index f12ec04d3cbc..de7fd80b022a 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -224,6 +224,14 @@ #clock-cells = <1>; #reset-cells = <1>; + scu_ic: interrupt-controller@18 { + #interrupt-cells = <1>; + compatible = "aspeed,ast2500-scu-ic"; + reg = <0x18 0x4>; + interrupts = <21>; + interrupt-controller; + }; + p2a: p2a-control@2c { compatible = "aspeed,ast2500-p2a-ctrl"; reg = <0x2c 0x4>; @@ -254,6 +262,17 @@ interrupts = <0x19>; }; + xdma: xdma@1e6e7000 { + compatible = "aspeed,ast2500-xdma"; + reg = <0x1e6e7000 0x100>; + clocks = <&syscon ASPEED_CLK_GATE_BCLK>; + resets = <&syscon ASPEED_RESET_XDMA>; + interrupts-extended = <&vic 6>, <&scu_ic 2>; + pcie-device = "bmc"; + aspeed,scu = <&syscon>; + status = "disabled"; + }; + adc: adc@1e6e9000 { compatible = "aspeed,ast2500-adc"; reg = <0x1e6e9000 0xb0>; @@ -426,22 +445,22 @@ #size-cells = <1>; ranges = <0x0 0x0 0x80>; - kcs1: kcs1@0 { - compatible = "aspeed,ast2500-kcs-bmc"; + kcs1: kcs@24 { + compatible = "aspeed,ast2500-kcs-bmc-v2"; + reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>; interrupts = <8>; - kcs_chan = <1>; status = "disabled"; }; - kcs2: kcs2@0 { - compatible = "aspeed,ast2500-kcs-bmc"; + kcs2: kcs@28 { + compatible = "aspeed,ast2500-kcs-bmc-v2"; + reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>; interrupts = <8>; - kcs_chan = <2>; status = "disabled"; }; - kcs3: kcs3@0 { - compatible = "aspeed,ast2500-kcs-bmc"; + kcs3: kcs@2c { + compatible = "aspeed,ast2500-kcs-bmc-v2"; + reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>; interrupts = <8>; - kcs_chan = <3>; status = "disabled"; }; }; @@ -455,10 +474,10 @@ #size-cells = <1>; ranges = <0x0 0x80 0x1e0>; - kcs4: kcs4@0 { - compatible = "aspeed,ast2500-kcs-bmc"; + kcs4: kcs@94 { + compatible = "aspeed,ast2500-kcs-bmc-v2"; + reg = <0x94 0x1>, <0x98 0x1>, <0x9c 0x1>; interrupts = <8>; - kcs_chan = <4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi index 0a29b3b57a9d..9d8d8e18bc90 100644 --- a/arch/arm/boot/dts/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed-g6.dtsi @@ -65,6 +65,7 @@ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; clocks = <&syscon ASPEED_CLK_HPLL>; arm,cpu-registers-not-fw-configured; + always-on; }; ahb { @@ -313,6 +314,22 @@ compatible = "aspeed,ast2600-smpmem"; reg = <0x180 0x40>; }; + + scu_ic0: interrupt-controller@560 { + #interrupt-cells = <1>; + compatible = "aspeed,ast2600-scu-ic0"; + reg = <0x560 0x4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + }; + + scu_ic1: interrupt-controller@570 { + #interrupt-cells = <1>; + compatible = "aspeed,ast2600-scu-ic1"; + reg = <0x570 0x4>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + }; }; rng: hwrng@1e6e2524 { @@ -322,6 +339,29 @@ quality = <100>; }; + xdma: xdma@1e6e7000 { + compatible = "aspeed,ast2600-xdma"; + reg = <0x1e6e7000 0x100>; + clocks = <&syscon ASPEED_CLK_GATE_BCLK>; + resets = <&syscon ASPEED_RESET_DEV_XDMA>, <&syscon ASPEED_RESET_RC_XDMA>; + reset-names = "device", "root-complex"; + interrupts-extended = <&gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <&scu_ic0 2>; + pcie-device = "bmc"; + aspeed,scu = <&syscon>; + status = "disabled"; + }; + + video: video@1e700000 { + compatible = "aspeed,ast2600-video-engine"; + reg = <0x1e700000 0x1000>; + clocks = <&syscon ASPEED_CLK_GATE_VCLK>, + <&syscon ASPEED_CLK_GATE_ECLK>; + clock-names = "vclk", "eclk"; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + gpio0: gpio@1e780000 { #gpio-cells = <2>; gpio-controller; @@ -368,6 +408,7 @@ <&gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; clocks = <&syscon ASPEED_CLK_APB1>; clock-names = "PCLK"; + status = "disabled"; }; uart1: serial@1e783000 { @@ -433,22 +474,23 @@ #size-cells = <1>; ranges = <0x0 0x0 0x80>; - kcs1: kcs1@0 { - compatible = "aspeed,ast2600-kcs-bmc"; + kcs1: kcs@24 { + compatible = "aspeed,ast2500-kcs-bmc-v2"; + reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>; interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; kcs_chan = <1>; status = "disabled"; }; - kcs2: kcs2@0 { - compatible = "aspeed,ast2600-kcs-bmc"; + kcs2: kcs@28 { + compatible = "aspeed,ast2500-kcs-bmc-v2"; + reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>; interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; - kcs_chan = <2>; status = "disabled"; }; - kcs3: kcs3@0 { - compatible = "aspeed,ast2600-kcs-bmc"; + kcs3: kcs@2c { + compatible = "aspeed,ast2500-kcs-bmc-v2"; + reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>; interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; - kcs_chan = <3>; status = "disabled"; }; }; @@ -462,10 +504,10 @@ #size-cells = <1>; ranges = <0x0 0x80 0x1e0>; - kcs4: kcs4@0 { - compatible = "aspeed,ast2600-kcs-bmc"; + kcs4: kcs@94 { + compatible = "aspeed,ast2500-kcs-bmc-v2"; + reg = <0x94 0x1>, <0x98 0x1>, <0x9c 0x1>; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; - kcs_chan = <4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi index 21876da7c442..c1c8650dafce 100644 --- a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi +++ b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi @@ -62,7 +62,7 @@ wm8904: wm8904@1a { compatible = "wlf,wm8904"; reg = <0x1a>; - clocks = <&pck2>; + clocks = <&pmc PMC_TYPE_SYSTEM 10>; clock-names = "mclk"; }; }; diff --git a/arch/arm/boot/dts/at91-kizbox3-hs.dts b/arch/arm/boot/dts/at91-kizbox3-hs.dts index 8734e7f8939e..0da1f0557eaf 100644 --- a/arch/arm/boot/dts/at91-kizbox3-hs.dts +++ b/arch/arm/boot/dts/at91-kizbox3-hs.dts @@ -283,7 +283,7 @@ &flx3 { status = "okay"; - uart6: serial@200 { + uart8: serial@200 { status = "okay"; }; }; @@ -291,7 +291,7 @@ &flx4 { status = "okay"; - i2c2: i2c@600 { + i2c6: i2c@600 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/at91-kizbox3_common.dtsi b/arch/arm/boot/dts/at91-kizbox3_common.dtsi index 299e74d23184..7c3076e245ef 100644 --- a/arch/arm/boot/dts/at91-kizbox3_common.dtsi +++ b/arch/arm/boot/dts/at91-kizbox3_common.dtsi @@ -28,7 +28,7 @@ serial3 = &uart3; serial4 = &uart4; serial5 = &uart5; - serial6 = &uart6; + serial6 = &uart8; }; chosen { @@ -207,7 +207,7 @@ }; }; - pinctrl_flx4_default: flx4_i2c2_default { + pinctrl_flx4_default: flx4_i2c6_default { pinmux = <PIN_PD12__FLEXCOM4_IO0>, //DATA <PIN_PD13__FLEXCOM4_IO1>; //CLK bias-disable; @@ -299,21 +299,8 @@ status = "disabled"; uart5: serial@200 { - compatible = "atmel,at91sam9260-usart"; - reg = <0x200 0x400>; - interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; - dmas = <&dma0 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) - | AT91_XDMAC_DT_PERID(11))>, - <&dma0 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) - | AT91_XDMAC_DT_PERID(12))>; - dma-names = "tx", "rx"; - clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; - clock-names = "usart"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx0_default>; - atmel,fifo-size = <32>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -324,22 +311,9 @@ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>; status = "disabled"; - uart6: serial@200 { - compatible = "atmel,at91sam9260-usart"; - reg = <0x200 0x400>; - interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>; - dmas = <&dma0 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) - | AT91_XDMAC_DT_PERID(17))>, - <&dma0 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) - | AT91_XDMAC_DT_PERID(18))>; - dma-names = "tx", "rx"; - clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; - clock-names = "usart"; + uart8: serial@200 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx3_default>; - atmel,fifo-size = <32>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -350,23 +324,9 @@ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; status = "disabled"; - i2c2: i2c@600 { - compatible = "atmel,sama5d2-i2c"; - reg = <0x600 0x200>; - interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; - dmas = <&dma0 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) - | AT91_XDMAC_DT_PERID(19))>, - <&dma0 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) - | AT91_XDMAC_DT_PERID(20))>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; + i2c6: i2c@600 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx4_default>; - atmel,fifo-size = <16>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts index b484745bf2d4..a5f5718c711a 100644 --- a/arch/arm/boot/dts/at91-sam9x60ek.dts +++ b/arch/arm/boot/dts/at91-sam9x60ek.dts @@ -542,6 +542,18 @@ }; }; + sdmmc1 { + pinctrl_sdmmc1_default: sdmmc1 { + atmel,pins = + <AT91_PIOA 13 AT91_PERIPH_B (AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA13 CK periph B */ + AT91_PIOA 12 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA12 CMD periph B with pullup */ + AT91_PIOA 11 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA11 DAT0 periph B with pullup */ + AT91_PIOA 2 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA2 DAT1 periph B with pullup */ + AT91_PIOA 3 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA3 DAT2 periph B with pullup */ + AT91_PIOA 4 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>; /* PA4 DAT3 periph B with pullup */ + }; + }; + gpio_keys { pinctrl_key_gpio_default: pinctrl_key_gpio { atmel,pins = <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; @@ -568,6 +580,15 @@ disable-wp; }; +&sdmmc1 { + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdmmc1_default>; + no-1-8-v; + non-removable; + status = "disabled"; /* Conflict with flx4. */ +}; + &qspi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_qspi>; @@ -579,6 +600,8 @@ compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <80000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; m25p,fast-read; at91bootstrap@0 { diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi index 6281590150c8..b1f994c0ae79 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi +++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi @@ -13,6 +13,10 @@ model = "Atmel SAMA5D27 SoM1"; compatible = "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5"; + aliases { + i2c0 = &i2c0; + }; + clocks { slow_xtal { clock-frequency = <32768>; @@ -34,12 +38,44 @@ pinctrl-0 = <&pinctrl_qspi1_default>; flash@0 { + #address-cells = <1>; + #size-cells = <1>; compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <80000000>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; m25p,fast-read; + + at91bootstrap@00000000 { + label = "at91bootstrap"; + reg = <0x00000000 0x00040000>; + }; + + bootloader@00040000 { + label = "bootloader"; + reg = <0x00040000 0x000c0000>; + }; + + bootloaderenvred@00100000 { + label = "bootloader env redundant"; + reg = <0x00100000 0x00040000>; + }; + + bootloaderenv@00140000 { + label = "bootloader env"; + reg = <0x00140000 0x00040000>; + }; + + dtb@00180000 { + label = "device tree"; + reg = <0x00180000 0x00080000>; + }; + + kernel@00200000 { + label = "kernel"; + reg = <0x00200000 0x00600000>; + }; }; }; @@ -57,7 +93,25 @@ }; }; + i2c0: i2c@f8028000 { + dmas = <0>, <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0_default>; + status = "okay"; + + at24@50 { + compatible = "24c02"; + reg = <0x50>; + pagesize = <8>; + }; + }; + pinctrl@fc038000 { + pinctrl_i2c0_default: i2c0_default { + pinmux = <PIN_PD21__TWD0>, + <PIN_PD22__TWCK0>; + bias-disable; + }; pinctrl_qspi1_default: qspi1_default { sck_cs { diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts index b0853bf7901c..0e159f879c15 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts @@ -21,7 +21,7 @@ serial1 = &uart4; /* mikro BUS 1 */ serial2 = &uart2; /* mikro BUS 2 */ i2c1 = &i2c1; - i2c2 = &i2c2; + i2c2 = &i2c3; }; chosen { @@ -125,21 +125,13 @@ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; status = "okay"; - i2c2: i2c@600 { - compatible = "atmel,sama5d2-i2c"; - reg = <0x600 0x200>; - interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>; + i2c3: i2c@600 { dmas = <0>, <0>; - dma-names = "tx", "rx"; i2c-analog-filter; i2c-digital-filter; i2c-digital-filter-width-ns = <35>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mikrobus_i2c>; - atmel,fifo-size = <16>; status = "okay"; }; }; @@ -178,27 +170,17 @@ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>; status = "disabled"; - uart7: serial@200 { - compatible = "atmel,at91sam9260-usart"; - reg = <0x200 0x200>; - interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; - clock-names = "usart"; + uart8: serial@200 { + dmas = <0>, <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx3_default>; - atmel,fifo-size = <32>; status = "disabled"; /* Conflict with isc. */ }; - spi2: spi@400 { - compatible = "atmel,at91rm9200-spi"; - reg = <0x400 0x200>; - interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; - clock-names = "spi_clk"; + spi5: spi@400 { + dmas = <0>, <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx3_default>; - atmel,fifo-size = <16>; status = "disabled"; /* Conflict with isc. */ }; }; @@ -207,43 +189,25 @@ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>; status = "okay"; - uart6: serial@200 { - compatible = "atmel,at91sam9260-usart"; - reg = <0x200 0x200>; - interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; - clock-names = "usart"; + uart9: serial@200 { + dmas = <0>, <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx4_default>; - atmel,fifo-size = <32>; - status = "disabled"; /* Conflict with spi3 and i2c3. */ + status = "disabled"; /* Conflict with spi6 and i2c6. */ }; - spi3: spi@400 { - compatible = "atmel,at91rm9200-spi"; - reg = <0x400 0x200>; - interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; - clock-names = "spi_clk"; + spi6: spi@400 { + dmas = <0>, <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mikrobus_spi &pinctrl_mikrobus1_spi_cs &pinctrl_mikrobus2_spi_cs>; - atmel,fifo-size = <16>; - status = "okay"; /* Conflict with uart6 and i2c3. */ + status = "okay"; /* Conflict with uart5 and i2c6. */ }; - i2c3: i2c@600 { - compatible = "atmel,sama5d2-i2c"; - reg = <0x600 0x200>; - interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; + i2c6: i2c@600 { dmas = <0>, <0>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx4_default>; - atmel,fifo-size = <16>; - status = "disabled"; /* Conflict with uart6 and spi3. */ + status = "disabled"; /* Conflict with uart5 and spi6. */ }; }; diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi index db3e2239eee8..a06700e53e4c 100644 --- a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi +++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi @@ -17,6 +17,10 @@ model = "Microchip SAMA5D27 WLSOM1"; compatible = "microchip,sama5d27-wlsom1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5"; + aliases { + i2c0 = &i2c0; + }; + clocks { slow_xtal { clock-frequency = <32768>; @@ -32,18 +36,6 @@ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>; uart6: serial@200 { - compatible = "atmel,at91sam9260-usart"; - reg = <0x200 0x200>; - interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>; - dmas = <&dma0 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | - AT91_XDMAC_DT_PERID(13))>, - <&dma0 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | - AT91_XDMAC_DT_PERID(14))>; - dma-names = "tx", "rx"; - clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; - clock-names = "usart"; pinctrl-0 = <&pinctrl_flx1_default>; pinctrl-names = "default"; }; diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts index 6b8461278950..6b38fa3f5568 100644 --- a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts @@ -77,18 +77,6 @@ status = "okay"; uart5: serial@200 { - compatible = "atmel,at91sam9260-usart"; - reg = <0x200 0x200>; - interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; - dmas = <&dma0 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | - AT91_XDMAC_DT_PERID(11))>, - <&dma0 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | - AT91_XDMAC_DT_PERID(12))>; - dma-names = "tx", "rx"; - clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; - clock-names = "usart"; pinctrl-0 = <&pinctrl_flx0_default>; pinctrl-names = "default"; atmel,use-dma-rx; diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts new file mode 100644 index 000000000000..8d19925fc09e --- /dev/null +++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts @@ -0,0 +1,767 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * at91-sama5d2_icp.dts - Device Tree file for SAMA5D2-ICP board + * + * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries + * + * Author: Radu Pirea & Razvan Stefanescu, + * Codrin Ciubotariu <codrin.ciubotariu@microchip.com>, + * Cristian Birsan <cristian.birsan@microchip.com> + */ +/dts-v1/; +#include "sama5d2.dtsi" +#include "sama5d2-pinfunc.h" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/mfd/atmel-flexcom.h> + +/ { + model = "Microchip SAMA5D2-ICP"; + compatible = "microchip,sama5d2-icp", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5"; + + aliases { + serial0 = &uart0; /* debug uart0 + mikro BUS 1 */ + serial1 = &uart1; /* mikro BUS 3 */ + serial3 = &uart3; /* mikro BUS 2 */ + serial5 = &uart7; /* flx2 */ + i2c0 = &i2c0; + i2c1 = &i2c1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_key_gpio_default>; + status = "okay"; + + sw4 { + label = "USER_PB1"; + gpios = <&pioA PIN_PD0 GPIO_ACTIVE_LOW>; + linux,code = <0x104>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led_gpio_default>; + status = "okay"; /* conflict with pwm0 */ + + red { + label = "red"; + gpios = <&pioA PIN_PB0 GPIO_ACTIVE_HIGH>; + }; + + green { + label = "green"; + gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>; + }; + + blue { + label = "blue"; + gpios = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&adc { + vddana-supply = <&vdd_io_reg>; + vref-supply = <&vdd_io_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>; + status = "okay"; +}; + +&can0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can0_default>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_default>; + status = "okay"; +}; + +&flx0 { /* mikrobus2 spi */ + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>; + status = "okay"; + + spi2: spi@400 { + dmas = <0>, <0>; + cs-gpios = <&pioA PIN_PC0 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mikrobus2_spi &pinctrl_ksz_spi_cs>; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + switch0: ksz8563@0 { + compatible = "microchip,ksz8563"; + reg = <0>; + phy-mode = "mii"; + reset-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_LOW>; + + spi-max-frequency = <500000>; + spi-cpha; + spi-cpol; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "cpu"; + ethernet = <&macb0>; + fixed-link { + speed = <100>; + full-duplex; + }; + }; + }; + }; + }; +}; + +&flx2 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>; + status = "okay"; + + uart7: serial@200 { + pinctrl-0 = <&pinctrl_flx2_default>; + pinctrl-names = "default"; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; /* Conflict w/ qspi1. */ + }; +}; + +&flx3 { /* mikrobus1 spi */ + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>; + status = "okay"; + + spi5: spi@400 { + dmas = <0>, <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mikrobus1_spi &pinctrl_mikrobus1_spi_cs>; + status = "okay"; + }; +}; + +&flx4 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; + status = "okay"; + + i2c6: i2c@600 { + dmas = <0>, <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx4_default>; + status = "okay"; + + mcp16502@5b { + compatible = "microchip,mcp16502"; + reg = <0x5b>; + status = "okay"; + lpm-gpios = <&pioBU 7 GPIO_ACTIVE_LOW>; + + regulators { + vdd_io_reg: VDD_IO { + regulator-name = "VDD_IO"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3700000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + VDD_DDR { + regulator-name = "VDD_DDR"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1850000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + }; + + VDD_CORE { + regulator-name = "VDD_CORE"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1850000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + VDD_OTHER { + regulator-name = "VDD_OTHER"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1850000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + }; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + }; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + }; + }; + }; +}; + +&i2c0 { /* mikrobus i2c */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mikrobus_i2c>; + status = "okay"; +}; + +&i2c1 { + dmas = <0>, <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_default>; + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + pagesize = <16>; + status = "okay"; + }; + + eeprom@52 { + compatible = "atmel,24c32"; + reg = <0x52>; + pagesize = <16>; + status = "disabled"; + }; + + eeprom@53 { + compatible = "atmel,24c32"; + reg = <0x53>; + pagesize = <16>; + status = "disabled"; + }; +}; + +&macb0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq &pinctrl_macb0_rst>; + phy-mode = "mii"; + status = "okay"; + + fixed-link { + speed = <100>; + full-duplex; + }; +}; + +&pioA { + pinctrl_adc_default: adc_default { + pinmux = <PIN_PD24__GPIO>, + <PIN_PD25__GPIO>, + <PIN_PD26__GPIO>; + bias-disable; + }; + + /* + * The ADTRG pin can work on any edge type. + * In here it's being pulled up, so need to + * connect it to ground to get an edge e.g. + * Trigger can be configured on falling, rise + * or any edge, and the pull-up can be changed + * to pull-down or left floating according to + * needs. + */ + pinctrl_adtrg_default: adtrg_default { + pinmux = <PIN_PD31__ADTRG>; + bias-pull-up; + }; + + pinctrl_flx4_default: flx4_default { + pinmux = <PIN_PC28__FLEXCOM4_IO0>, + <PIN_PC29__FLEXCOM4_IO1>; + bias-disable; + }; + + pinctrl_can0_default: can0_default { + pinmux = <PIN_PC10__CANTX0>, + <PIN_PC11__CANRX0>; + bias-disable; + }; + + pinctrl_can1_default: can1_default { + pinmux = <PIN_PC26__CANTX1>, + <PIN_PC27__CANRX1>; + bias-disable; + }; + + pinctrl_i2c1_default: i2c1_default { + pinmux = <PIN_PD19__TWD1>, + <PIN_PD20__TWCK1>; + bias-disable; + }; + + pinctrl_key_gpio_default: key_gpio_default { + pinmux = <PIN_PD0__GPIO>; + bias-pull-up; + }; + + pinctrl_led_gpio_default: led_gpio_default { + pinmux = <PIN_PB0__GPIO>, + <PIN_PB1__GPIO>, + <PIN_PA31__GPIO>; + bias-pull-up; + }; + + pinctrl_qspi1_default: qspi1_default { + pinmux = <PIN_PA6__QSPI1_SCK>, + <PIN_PA7__QSPI1_IO0>, + <PIN_PA8__QSPI1_IO1>, + <PIN_PA9__QSPI1_IO2>, + <PIN_PA10__QSPI1_IO3>, + <PIN_PA11__QSPI1_CS>; + bias-disable; + }; + + pinctrl_sdmmc0_default: sdmmc0_default { + cmd_data { + pinmux = <PIN_PA1__SDMMC0_CMD>, + <PIN_PA2__SDMMC0_DAT0>, + <PIN_PA3__SDMMC0_DAT1>, + <PIN_PA4__SDMMC0_DAT2>, + <PIN_PA5__SDMMC0_DAT3>; + bias-disable; + }; + + ck_cd { + pinmux = <PIN_PA0__SDMMC0_CK>, + <PIN_PA13__SDMMC0_CD>; + bias-disable; + }; + }; + + pinctrl_sdmmc1_default: sdmmc1_default { + cmd_data { + pinmux = <PIN_PA18__SDMMC1_DAT0>, + <PIN_PA19__SDMMC1_DAT1>, + <PIN_PA20__SDMMC1_DAT2>, + <PIN_PA21__SDMMC1_DAT3>; + bias-disable; + }; + + ck_cd { + pinmux = <PIN_PA22__SDMMC1_CK>, + <PIN_PA28__SDMMC1_CMD>; + bias-disable; + }; + }; + + pinctrl_mikrobus_i2c: mikrobus_i2c { + pinmux = <PIN_PD22__TWCK0>, + <PIN_PD21__TWD0>; + bias-disable; + }; + + pinctrl_mikrobus1_an: mikrobus1_an { + pinmux = <PIN_PD26__GPIO>; + bias-disable; + }; + + pinctrl_mikrobus1_rst: mikrobus1_rst { + pinmux = <PIN_PC5__GPIO>; + bias-disable; + }; + + pinctrl_mikrobus1_spi_cs: mikrobus1_spi_cs { + pinmux = <PIN_PC21__FLEXCOM3_IO3>; + bias-disable; + }; + + pinctrl_mikrobus1_spi: mikrobus1_spi { + pinmux = <PIN_PC20__FLEXCOM3_IO0>, + <PIN_PC19__FLEXCOM3_IO1>, + <PIN_PC18__FLEXCOM3_IO2>; + bias-disable; + }; + + pinctrl_mikrobus1_pwm: mikrobus1_pwm { + pinmux = <PIN_PC4__TIOB1>; + bias-disable; + }; + + pinctrl_mikrobus1_int: mikrobus1_int { + pinmux = <PIN_PC3__GPIO>; + bias-disable; + }; + + pinctrl_mikrobus1_uart: mikrobus1_uart { + pinmux = <PIN_PB26__URXD0>, + <PIN_PB27__UTXD0>; + bias-disable; + }; + + pinctrl_mikrobus2_an: mikrobus2_an { + pinmux = <PIN_PD25__GPIO>; + bias-disable; + }; + + pinctrl_mikrobus2_rst: mikrobus2_rst { + pinmux = <PIN_PB24__GPIO>; + bias-disable; + }; + + pinctrl_mikrobus2_spi_cs: mikrobus2_spi_cs { + pinmux = <PIN_PB31__FLEXCOM0_IO3>; + bias-disable; + }; + + pinctrl_mikrobus2_spi: mikrobus2_spi { + pinmux = <PIN_PB28__FLEXCOM0_IO0>, + <PIN_PB29__FLEXCOM0_IO1>, + <PIN_PB30__FLEXCOM0_IO2>; + bias-disable; + }; + + pinctrl_ksz_spi_cs: ksz_spi_cs { + pinmux = <PIN_PC0__GPIO>; + bias-disable; + }; + + pinctrl_mikrobus2_pwm: mikrobus2_pwm { + pinmux = <PIN_PB23__TIOB2>; + bias-disable; + }; + + pinctrl_mikrobus2_int: mikrobus2_int { + pinmux = <PIN_PB22__GPIO>; + bias-disable; + }; + + pinctrl_mikrobus2_uart: mikrobus2_uart { + pinmux = <PIN_PC12__URXD3>, + <PIN_PC13__UTXD3>; + bias-disable; + }; + + pinctrl_mikrobus3_an: mikrobus3_an { + pinmux = <PIN_PD24__GPIO>; + bias-disable; + }; + + pinctrl_mikrobus3_rst: mikrobus3_rst { + pinmux = <PIN_PB21__GPIO>; + bias-disable; + }; + + pinctrl_mikrobus3_spi_cs: mikrobus3_spi_cs { + pinmux = <PIN_PA17__SPI0_NPCS0>; + bias-disable; + }; + + pinctrl_mikrobus3_spi: mikrobus3_spi { + pinmux = <PIN_PA14__SPI0_SPCK>, + <PIN_PA16__SPI0_MISO>, + <PIN_PA15__SPI0_MOSI>; + bias-disable; + }; + + pinctrl_mikrobus3_pwm: mikrobus3_pwm { + pinmux = <PIN_PB20__TIOB3>; + bias-disable; + }; + + pinctrl_mikrobus3_int: mikrobus3_int { + pinmux = <PIN_PB18__GPIO>; + bias-disable; + }; + + pinctrl_mikrobus3_uart: mikrobus3_uart { + pinmux = <PIN_PC7__URXD1>, + <PIN_PC8__UTXD1>; + bias-disable; + }; + + pinctrl_usb_default: usb_default { + pinmux = <PIN_PC17__GPIO>; + bias-disable; + }; + + pinctrl_usba_vbus: usba_vbus { + pinmux = <PIN_PD23__GPIO>; + bias-disable; + }; + + pinctrl_pwm0_pwm2_default: pwm0_pwm2_default { + pinmux = <PIN_PB5__PWMH2>, + <PIN_PB6__PWML2>; + bias-pull-up; + }; + + pinctrl_macb0_default: macb0_default { + pinmux = <PIN_PD1__GRXCK>, + <PIN_PD2__GTXER>, + <PIN_PD5__GRX2>, + <PIN_PD6__GRX3>, + <PIN_PD7__GTX2>, + <PIN_PD8__GTX3>, + <PIN_PD9__GTXCK>, + <PIN_PD10__GTXEN>, + <PIN_PD11__GRXDV>, + <PIN_PD12__GRXER>, + <PIN_PD13__GRX0>, + <PIN_PD14__GRX1>, + <PIN_PD15__GTX0>, + <PIN_PD16__GTX1>, + <PIN_PD17__GMDC>, + <PIN_PD18__GMDIO>; + bias-disable; + }; + + pinctrl_macb0_phy_irq: macb0_phy_irq { + pinmux = <PIN_PD3__GPIO>; + bias-disable; + }; + + pinctrl_macb0_rst: macb0_sw_rst { + pinmux = <PIN_PD4__GPIO>; + bias-disable; + }; + + pinctrl_flx2_default: flx2_default { + pinmux = <PIN_PA6__FLEXCOM2_IO0>, + <PIN_PA7__FLEXCOM2_IO1>, + <PIN_PA9__FLEXCOM2_IO3>, + <PIN_PA10__FLEXCOM2_IO4>; + bias-disable; + }; +}; + +&pwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_pwm2_default>; + status = "disabled"; /* conflict with leds, HSIC */ +}; + +&qspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi1_default>; + status = "disabled"; /* Conflict with wilc_pwrseq, flx2 */ + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <80000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + m25p,fast-read; + + at91bootstrap@0 { + label = "qspi: at91bootstrap"; + reg = <0x00000000 0x00040000>; + }; + + bootloader@40000 { + label = "qspi: bootloader"; + reg = <0x00040000 0x000c0000>; + }; + + bootloaderenvred@100000 { + label = "qspi: bootloader env redundant"; + reg = <0x00100000 0x00040000>; + }; + + bootloaderenv@140000 { + label = "qspi: bootloader env"; + reg = <0x00140000 0x00040000>; + }; + + dtb@180000 { + label = "qspi: device tree"; + reg = <0x00180000 0x00080000>; + }; + + kernel@200000 { + label = "qspi: kernel"; + reg = <0x00200000 0x00600000>; + }; + }; +}; + +&sdmmc0 { + no-1-8-v; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdmmc0_default>; + status = "okay"; +}; + +&shutdown_controller { + atmel,shdwc-debouncer = <976>; + atmel,wakeup-rtc-timer; + + input@0 { + reg = <0>; + atmel,wakeup-type = "low"; + }; +}; + +&spi0 { /* mikrobus3 spi */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mikrobus3_spi &pinctrl_mikrobus3_spi_cs>; + status = "okay"; +}; + +&tcb0 { + timer0: timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer1: timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mikrobus1_uart>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mikrobus3_uart>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mikrobus2_uart>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; +}; + +&usb0 { + atmel,vbus-gpio = <&pioA PIN_PD23 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + status = "okay"; +}; + +&usb1 { + num-ports = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_default>; + status = "okay"; +}; + +&usb2 { + phy_type = "hsic"; + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts index 1c24ac8019ba..c894c7c788a9 100644 --- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts @@ -18,9 +18,9 @@ compatible = "atmel,sama5d2-ptc_ek", "atmel,sama5d2", "atmel,sama5"; aliases { - serial0 = &uart0; - i2c0 = &i2c0; - i2c1 = &i2c1; + serial0 = &uart0; /* DBGU */ + i2c0 = &i2c0; /* mikroBUS 1 */ + i2c1 = &i2c1; /* XPRO EXT1 */ i2c2 = &i2c2; }; @@ -40,7 +40,7 @@ ahb { usb0: gadget@300000 { - atmel,vbus-gpio = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>; + atmel,vbus-gpio = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; @@ -125,8 +125,6 @@ bus-width = <8>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sdmmc0_default>; - non-removable; - mmc-ddr-1_8v; status = "okay"; }; @@ -184,7 +182,7 @@ pinctrl-0 = <&pinctrl_i2c0_default>; pinctrl-1 = <&pinctrl_i2c0_gpio>; sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>; - scl-gpios = <&pioA PIN_PD22 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; }; @@ -193,20 +191,12 @@ status = "okay"; i2c2: i2c@600 { - compatible = "atmel,sama5d2-i2c"; - reg = <0x600 0x200>; - interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <0>, <0>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_flx0_default>; pinctrl-1 = <&pinctrl_flx0_gpio>; sda-gpios = <&pioA PIN_PB28 GPIO_ACTIVE_HIGH>; - scl-gpios = <&pioA PIN_PB29 GPIO_ACTIVE_HIGH>; - atmel,fifo-size = <16>; + scl-gpios = <&pioA PIN_PB29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; }; }; @@ -236,7 +226,7 @@ pinctrl-0 = <&pinctrl_i2c1_default>; pinctrl-1 = <&pinctrl_i2c1_gpio>; sda-gpios = <&pioA PIN_PC6 GPIO_ACTIVE_HIGH>; - scl-gpios = <&pioA PIN_PC7 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PC7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; at24@50 { @@ -414,6 +404,7 @@ label = "PB_USER"; gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>; linux,code = <0x104>; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index 055ee53e4773..a927165ea7c2 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -16,6 +16,13 @@ model = "Atmel SAMA5D2 Xplained"; compatible = "atmel,sama5d2-xplained", "atmel,sama5d2", "atmel,sama5"; + aliases { + serial0 = &uart1; /* DBGU */ + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; /* XPRO EXT2 */ + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -72,6 +79,58 @@ }; apb { + qspi0: spi@f0020000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi0_default>; + status = "disabled"; /* conflict with sdmmc1 */ + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <80000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + m25p,fast-read; + + at91bootstrap@00000000 { + label = "at91bootstrap"; + reg = <0x00000000 0x00040000>; + }; + + bootloader@00040000 { + label = "bootloader"; + reg = <0x00040000 0x000c0000>; + }; + + bootloaderenvred@00100000 { + label = "bootloader env redundant"; + reg = <0x00100000 0x00040000>; + }; + + bootloaderenv@00140000 { + label = "bootloader env"; + reg = <0x00140000 0x00040000>; + }; + + dtb@00180000 { + label = "device tree"; + reg = <0x00180000 0x00080000>; + }; + + kernel@00200000 { + label = "kernel"; + reg = <0x00200000 0x00600000>; + }; + + misc@00800000 { + label = "misc"; + reg = <0x00800000 0x00000000>; + }; + }; + }; + spi0: spi@f8000000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0_default>; @@ -133,7 +192,7 @@ pinctrl-0 = <&pinctrl_i2c0_default>; pinctrl-1 = <&pinctrl_i2c0_gpio>; sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>; - scl-gpios = <&pioA PIN_PD22 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-sda-hold-time-ns = <350>; status = "okay"; @@ -275,16 +334,25 @@ status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */ uart5: serial@200 { - compatible = "atmel,at91sam9260-usart"; - reg = <0x200 0x200>; - interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; - clock-names = "usart"; + dmas = <0>, <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx0_default>; - atmel,fifo-size = <32>; status = "okay"; }; + + i2c2: i2c@600 { + dmas = <0>, <0>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_flx0_default>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + sda-gpios = <&pioA PIN_PB28 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PB29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-sda-hold-time-ns = <350>; + i2c-analog-filter; + i2c-digital-filter; + i2c-digital-filter-width-ns = <35>; + status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */ + }; }; shdwc@f8048010 { @@ -325,21 +393,13 @@ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; status = "okay"; - i2c2: i2c@600 { - compatible = "atmel,sama5d2-i2c"; - reg = <0x600 0x200>; - interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; + i2c6: i2c@600 { dmas = <0>, <0>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_flx4_default>; pinctrl-1 = <&pinctrl_flx4_gpio>; sda-gpios = <&pioA PIN_PD12 GPIO_ACTIVE_HIGH>; - scl-gpios = <&pioA PIN_PD13 GPIO_ACTIVE_HIGH>; - atmel,fifo-size = <16>; + scl-gpios = <&pioA PIN_PD13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-analog-filter; i2c-digital-filter; i2c-digital-filter-width-ns = <35>; @@ -356,7 +416,7 @@ i2c-digital-filter-width-ns = <35>; pinctrl-1 = <&pinctrl_i2c1_gpio>; sda-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_HIGH>; - scl-gpios = <&pioA PIN_PD5 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PD5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; at24@54 { @@ -480,6 +540,12 @@ bias-disable; }; + pinctrl_i2c2_gpio: i2c2_gpio { + pinmux = <PIN_PB28__GPIO>, + <PIN_PB29__GPIO>; + bias-disable; + }; + pinctrl_i2s0_default: i2s0_default { pinmux = <PIN_PC1__I2SC0_CK>, <PIN_PC2__I2SC0_MCK>, @@ -535,6 +601,22 @@ bias-disable; }; + pinctrl_qspi0_default: qspi0_default { + sck_cs { + pinmux = <PIN_PA22__QSPI0_SCK>, + <PIN_PA23__QSPI0_CS>; + bias-disable; + }; + + data { + pinmux = <PIN_PA24__QSPI0_IO0>, + <PIN_PA25__QSPI0_IO1>, + <PIN_PA26__QSPI0_IO2>, + <PIN_PA27__QSPI0_IO3>; + bias-pull-up; + }; + }; + pinctrl_sdmmc0_default: sdmmc0_default { cmd_data { pinmux = <PIN_PA1__SDMMC0_CMD>, diff --git a/arch/arm/boot/dts/at91-wb50n.dtsi b/arch/arm/boot/dts/at91-wb50n.dtsi index 4ed8500a5cb8..1487b893cfa7 100644 --- a/arch/arm/boot/dts/at91-wb50n.dtsi +++ b/arch/arm/boot/dts/at91-wb50n.dtsi @@ -46,10 +46,6 @@ atmel,osc-bypass; }; -&usart1_clk { - atmel,clk-output-range = <0 132000000>; -}; - &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>; diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index 44385718d9d4..a5040f5ea641 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -101,259 +101,9 @@ compatible = "atmel,at91rm9200-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - - main_osc: main_osc { - compatible = "atmel,at91rm9200-clk-main-osc"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_MOSCS>; - clocks = <&main_xtal>; - }; - - main: mainck { - compatible = "atmel,at91rm9200-clk-main"; - #clock-cells = <0>; - clocks = <&main_osc>; - }; - - plla: pllack { - compatible = "atmel,at91rm9200-clk-pll"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_LOCKA>; - clocks = <&main>; - reg = <0>; - atmel,clk-input-range = <1000000 32000000>; - #atmel,pll-clk-output-range-cells = <3>; - atmel,pll-clk-output-ranges = <80000000 160000000 0>, - <150000000 180000000 2>; - }; - - pllb: pllbck { - compatible = "atmel,at91rm9200-clk-pll"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_LOCKB>; - clocks = <&main>; - reg = <1>; - atmel,clk-input-range = <1000000 32000000>; - #atmel,pll-clk-output-range-cells = <3>; - atmel,pll-clk-output-ranges = <80000000 160000000 0>, - <150000000 180000000 2>; - }; - - mck: masterck { - compatible = "atmel,at91rm9200-clk-master"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_MCKRDY>; - clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>; - atmel,clk-output-range = <0 80000000>; - atmel,clk-divisors = <1 2 3 4>; - }; - - usb: usbck { - compatible = "atmel,at91rm9200-clk-usb"; - #clock-cells = <0>; - atmel,clk-divisors = <1 2 0 0>; - clocks = <&pllb>; - }; - - prog: progck { - compatible = "atmel,at91rm9200-clk-programmable"; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&pmc>; - clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>; - - prog0: prog0 { - #clock-cells = <0>; - reg = <0>; - interrupts = <AT91_PMC_PCKRDY(0)>; - }; - - prog1: prog1 { - #clock-cells = <0>; - reg = <1>; - interrupts = <AT91_PMC_PCKRDY(1)>; - }; - - prog2: prog2 { - #clock-cells = <0>; - reg = <2>; - interrupts = <AT91_PMC_PCKRDY(2)>; - }; - - prog3: prog3 { - #clock-cells = <0>; - reg = <3>; - interrupts = <AT91_PMC_PCKRDY(3)>; - }; - }; - - systemck { - compatible = "atmel,at91rm9200-clk-system"; - #address-cells = <1>; - #size-cells = <0>; - - udpck: udpck { - #clock-cells = <0>; - reg = <2>; - clocks = <&usb>; - }; - - uhpck: uhpck { - #clock-cells = <0>; - reg = <4>; - clocks = <&usb>; - }; - - pck0: pck0 { - #clock-cells = <0>; - reg = <8>; - clocks = <&prog0>; - }; - - pck1: pck1 { - #clock-cells = <0>; - reg = <9>; - clocks = <&prog1>; - }; - - pck2: pck2 { - #clock-cells = <0>; - reg = <10>; - clocks = <&prog2>; - }; - - pck3: pck3 { - #clock-cells = <0>; - reg = <11>; - clocks = <&prog3>; - }; - }; - - periphck { - compatible = "atmel,at91rm9200-clk-peripheral"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&mck>; - - pioA_clk: pioA_clk { - #clock-cells = <0>; - reg = <2>; - }; - - pioB_clk: pioB_clk { - #clock-cells = <0>; - reg = <3>; - }; - - pioC_clk: pioC_clk { - #clock-cells = <0>; - reg = <4>; - }; - - pioD_clk: pioD_clk { - #clock-cells = <0>; - reg = <5>; - }; - - usart0_clk: usart0_clk { - #clock-cells = <0>; - reg = <6>; - }; - - usart1_clk: usart1_clk { - #clock-cells = <0>; - reg = <7>; - }; - - usart2_clk: usart2_clk { - #clock-cells = <0>; - reg = <8>; - }; - - usart3_clk: usart3_clk { - #clock-cells = <0>; - reg = <9>; - }; - - mci0_clk: mci0_clk { - #clock-cells = <0>; - reg = <10>; - }; - - udc_clk: udc_clk { - #clock-cells = <0>; - reg = <11>; - }; - - twi0_clk: twi0_clk { - reg = <12>; - #clock-cells = <0>; - }; - - spi0_clk: spi0_clk { - #clock-cells = <0>; - reg = <13>; - }; - - ssc0_clk: ssc0_clk { - #clock-cells = <0>; - reg = <14>; - }; - - ssc1_clk: ssc1_clk { - #clock-cells = <0>; - reg = <15>; - }; - - ssc2_clk: ssc2_clk { - #clock-cells = <0>; - reg = <16>; - }; - - tc0_clk: tc0_clk { - #clock-cells = <0>; - reg = <17>; - }; - - tc1_clk: tc1_clk { - #clock-cells = <0>; - reg = <18>; - }; - - tc2_clk: tc2_clk { - #clock-cells = <0>; - reg = <19>; - }; - - tc3_clk: tc3_clk { - #clock-cells = <0>; - reg = <20>; - }; - - tc4_clk: tc4_clk { - #clock-cells = <0>; - reg = <21>; - }; - - tc5_clk: tc5_clk { - #clock-cells = <0>; - reg = <22>; - }; - - ohci_clk: ohci_clk { - #clock-cells = <0>; - reg = <23>; - }; - - macb0_clk: macb0_clk { - #clock-cells = <0>; - reg = <24>; - }; - }; + #clock-cells = <2>; + clocks = <&slow_xtal>, <&main_xtal>; + clock-names = "slow_xtal", "main_xtal"; }; st: timer@fffffd00 { @@ -383,7 +133,7 @@ interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0 18 IRQ_TYPE_LEVEL_HIGH 0 19 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>, <&slow_xtal>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 19>, <&slow_xtal>; clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; }; @@ -395,7 +145,7 @@ interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0 21 IRQ_TYPE_LEVEL_HIGH 0 22 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>, <&slow_xtal>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&pmc PMC_TYPE_PERIPHERAL 21>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&slow_xtal>; clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; }; @@ -405,7 +155,7 @@ interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_twi>; - clocks = <&twi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 12>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -415,7 +165,7 @@ compatible = "atmel,hsmci"; reg = <0xfffb4000 0x4000>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&mci0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; clock-names = "mci_clk"; #address-cells = <1>; #size-cells = <0>; @@ -429,7 +179,7 @@ interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; - clocks = <&ssc0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; clock-names = "pclk"; status = "disabled"; }; @@ -440,7 +190,7 @@ interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; - clocks = <&ssc1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; clock-names = "pclk"; status = "disabled"; }; @@ -451,7 +201,7 @@ interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>; - clocks = <&ssc2_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; clock-names = "pclk"; status = "disabled"; }; @@ -463,7 +213,7 @@ phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb_rmii>; - clocks = <&macb0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 24>; clock-names = "ether_clk"; status = "disabled"; }; @@ -803,7 +553,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioA_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; }; pioB: gpio@fffff600 { @@ -814,7 +564,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioB_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 3>; }; pioC: gpio@fffff800 { @@ -825,7 +575,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioC_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 4>; }; pioD: gpio@fffffa00 { @@ -836,7 +586,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioD_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; }; }; @@ -846,7 +596,7 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; clock-names = "usart"; status = "disabled"; }; @@ -859,7 +609,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; - clocks = <&usart0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; clock-names = "usart"; status = "disabled"; }; @@ -872,7 +622,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - clocks = <&usart1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; clock-names = "usart"; status = "disabled"; }; @@ -885,7 +635,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; - clocks = <&usart2_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; clock-names = "usart"; status = "disabled"; }; @@ -898,7 +648,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; - clocks = <&usart3_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; clock-names = "usart"; status = "disabled"; }; @@ -907,7 +657,7 @@ compatible = "atmel,at91rm9200-udc"; reg = <0xfffb0000 0x4000>; interrupts = <11 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&udc_clk>, <&udpck>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>, <&pmc PMC_TYPE_SYSTEM 2>; clock-names = "pclk", "hclk"; status = "disabled"; }; @@ -920,7 +670,7 @@ interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; - clocks = <&spi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; clock-names = "spi_clk"; status = "disabled"; }; @@ -947,7 +697,7 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00300000 0x100000>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&ohci_clk>, <&ohci_clk>, <&uhpck>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_SYSTEM 4>; clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index fd179097a4bf..3034c23e697d 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -103,14 +103,14 @@ ramc0: ramc@ffffe400 { compatible = "atmel,at91sam9g45-ddramc"; reg = <0xffffe400 0x200>; - clocks = <&ddrck>; + clocks = <&pmc PMC_TYPE_SYSTEM 2>; clock-names = "ddrck"; }; ramc1: ramc@ffffe600 { compatible = "atmel,at91sam9g45-ddramc"; reg = <0xffffe600 0x200>; - clocks = <&ddrck>; + clocks = <&pmc PMC_TYPE_SYSTEM 2>; clock-names = "ddrck"; }; @@ -128,271 +128,9 @@ compatible = "atmel,at91sam9g45-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - - main_osc: main_osc { - compatible = "atmel,at91rm9200-clk-main-osc"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_MOSCS>; - clocks = <&main_xtal>; - }; - - main: mainck { - compatible = "atmel,at91rm9200-clk-main"; - #clock-cells = <0>; - clocks = <&main_osc>; - }; - - plla: pllack { - compatible = "atmel,at91rm9200-clk-pll"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_LOCKA>; - clocks = <&main>; - reg = <0>; - atmel,clk-input-range = <2000000 32000000>; - #atmel,pll-clk-output-range-cells = <4>; - atmel,pll-clk-output-ranges = <745000000 800000000 0 0 - 695000000 750000000 1 0 - 645000000 700000000 2 0 - 595000000 650000000 3 0 - 545000000 600000000 0 1 - 495000000 555000000 1 1 - 445000000 500000000 2 1 - 400000000 450000000 3 1>; - }; - - plladiv: plladivck { - compatible = "atmel,at91sam9x5-clk-plldiv"; - #clock-cells = <0>; - clocks = <&plla>; - }; - - utmi: utmick { - compatible = "atmel,at91sam9x5-clk-utmi"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_LOCKU>; - clocks = <&main>; - }; - - mck: masterck { - compatible = "atmel,at91rm9200-clk-master"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_MCKRDY>; - clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>; - atmel,clk-output-range = <0 133333333>; - atmel,clk-divisors = <1 2 4 3>; - }; - - usb: usbck { - compatible = "atmel,at91sam9x5-clk-usb"; - #clock-cells = <0>; - clocks = <&plladiv>, <&utmi>; - }; - - prog: progck { - compatible = "atmel,at91sam9g45-clk-programmable"; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&pmc>; - clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>; - - prog0: prog0 { - #clock-cells = <0>; - reg = <0>; - interrupts = <AT91_PMC_PCKRDY(0)>; - }; - - prog1: prog1 { - #clock-cells = <0>; - reg = <1>; - interrupts = <AT91_PMC_PCKRDY(1)>; - }; - }; - - systemck { - compatible = "atmel,at91rm9200-clk-system"; - #address-cells = <1>; - #size-cells = <0>; - - ddrck: ddrck { - #clock-cells = <0>; - reg = <2>; - clocks = <&mck>; - }; - - uhpck: uhpck { - #clock-cells = <0>; - reg = <6>; - clocks = <&usb>; - }; - - pck0: pck0 { - #clock-cells = <0>; - reg = <8>; - clocks = <&prog0>; - }; - - pck1: pck1 { - #clock-cells = <0>; - reg = <9>; - clocks = <&prog1>; - }; - }; - - periphck { - compatible = "atmel,at91rm9200-clk-peripheral"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&mck>; - - pioA_clk: pioA_clk { - #clock-cells = <0>; - reg = <2>; - }; - - pioB_clk: pioB_clk { - #clock-cells = <0>; - reg = <3>; - }; - - pioC_clk: pioC_clk { - #clock-cells = <0>; - reg = <4>; - }; - - pioDE_clk: pioDE_clk { - #clock-cells = <0>; - reg = <5>; - }; - - trng_clk: trng_clk { - #clock-cells = <0>; - reg = <6>; - }; - - usart0_clk: usart0_clk { - #clock-cells = <0>; - reg = <7>; - }; - - usart1_clk: usart1_clk { - #clock-cells = <0>; - reg = <8>; - }; - - usart2_clk: usart2_clk { - #clock-cells = <0>; - reg = <9>; - }; - - usart3_clk: usart3_clk { - #clock-cells = <0>; - reg = <10>; - }; - - mci0_clk: mci0_clk { - #clock-cells = <0>; - reg = <11>; - }; - - twi0_clk: twi0_clk { - #clock-cells = <0>; - reg = <12>; - }; - - twi1_clk: twi1_clk { - #clock-cells = <0>; - reg = <13>; - }; - - spi0_clk: spi0_clk { - #clock-cells = <0>; - reg = <14>; - }; - - spi1_clk: spi1_clk { - #clock-cells = <0>; - reg = <15>; - }; - - ssc0_clk: ssc0_clk { - #clock-cells = <0>; - reg = <16>; - }; - - ssc1_clk: ssc1_clk { - #clock-cells = <0>; - reg = <17>; - }; - - tcb0_clk: tcb0_clk { - #clock-cells = <0>; - reg = <18>; - }; - - pwm_clk: pwm_clk { - #clock-cells = <0>; - reg = <19>; - }; - - adc_clk: adc_clk { - #clock-cells = <0>; - reg = <20>; - }; - - dma0_clk: dma0_clk { - #clock-cells = <0>; - reg = <21>; - }; - - uhphs_clk: uhphs_clk { - #clock-cells = <0>; - reg = <22>; - }; - - lcd_clk: lcd_clk { - #clock-cells = <0>; - reg = <23>; - }; - - ac97_clk: ac97_clk { - #clock-cells = <0>; - reg = <24>; - }; - - macb0_clk: macb0_clk { - #clock-cells = <0>; - reg = <25>; - }; - - isi_clk: isi_clk { - #clock-cells = <0>; - reg = <26>; - }; - - udphs_clk: udphs_clk { - #clock-cells = <0>; - reg = <27>; - }; - - aestdessha_clk: aestdessha_clk { - #clock-cells = <0>; - reg = <28>; - }; - - mci1_clk: mci1_clk { - #clock-cells = <0>; - reg = <29>; - }; - - vdec_clk: vdec_clk { - #clock-cells = <0>; - reg = <30>; - }; - }; + #clock-cells = <2>; + clocks = <&clk32k>, <&main_xtal>; + clock-names = "slow_clk", "main_xtal"; }; rstc@fffffd00 { @@ -405,7 +143,7 @@ compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; }; @@ -421,7 +159,7 @@ #size-cells = <0>; reg = <0xfff7c000 0x100>; interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>, <&clk32k>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&clk32k>; clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; }; @@ -431,7 +169,7 @@ #size-cells = <0>; reg = <0xfffd4000 0x100>; interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>, <&clk32k>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&clk32k>; clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; }; @@ -440,7 +178,7 @@ reg = <0xffffec00 0x200>; interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; - clocks = <&dma0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 21>; clock-names = "dma_clk"; }; @@ -883,7 +621,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioA_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; }; pioB: gpio@fffff400 { @@ -894,7 +632,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioB_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 3>; }; pioC: gpio@fffff600 { @@ -905,7 +643,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioC_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 4>; }; pioD: gpio@fffff800 { @@ -916,7 +654,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioDE_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; }; pioE: gpio@fffffa00 { @@ -927,7 +665,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioDE_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; }; }; @@ -937,7 +675,7 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; clock-names = "usart"; status = "disabled"; }; @@ -950,7 +688,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; - clocks = <&usart0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; clock-names = "usart"; status = "disabled"; }; @@ -963,7 +701,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; - clocks = <&usart1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; clock-names = "usart"; status = "disabled"; }; @@ -976,7 +714,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; - clocks = <&usart2_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; clock-names = "usart"; status = "disabled"; }; @@ -989,7 +727,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; - clocks = <&usart3_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; clock-names = "usart"; status = "disabled"; }; @@ -1000,7 +738,7 @@ interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb_rmii>; - clocks = <&macb0_clk>, <&macb0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_PERIPHERAL 25>; clock-names = "hclk", "pclk"; status = "disabled"; }; @@ -1009,7 +747,7 @@ compatible = "atmel,at91sam9g45-trng"; reg = <0xfffcc000 0x100>; interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&trng_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; }; i2c0: i2c@fff84000 { @@ -1020,7 +758,7 @@ pinctrl-0 = <&pinctrl_i2c0>; #address-cells = <1>; #size-cells = <0>; - clocks = <&twi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 12>; status = "disabled"; }; @@ -1032,7 +770,7 @@ pinctrl-0 = <&pinctrl_i2c1>; #address-cells = <1>; #size-cells = <0>; - clocks = <&twi1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; status = "disabled"; }; @@ -1042,7 +780,7 @@ interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; - clocks = <&ssc0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; clock-names = "pclk"; status = "disabled"; }; @@ -1053,7 +791,7 @@ interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; - clocks = <&ssc1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 17>; clock-names = "pclk"; status = "disabled"; }; @@ -1064,7 +802,7 @@ interrupts = <24 IRQ_TYPE_LEVEL_HIGH 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ac97>; - clocks = <&ac97_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 24>; clock-names = "ac97_clk"; status = "disabled"; }; @@ -1075,7 +813,7 @@ compatible = "atmel,at91sam9g45-adc"; reg = <0xfffb0000 0x100>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&adc_clk>, <&adc_op_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&adc_op_clk>; clock-names = "adc_clk", "adc_op_clk"; atmel,adc-channels-used = <0xff>; atmel,adc-vref = <3300>; @@ -1111,7 +849,7 @@ compatible = "atmel,at91sam9g45-isi"; reg = <0xfffb4000 0x4000>; interrupts = <26 IRQ_TYPE_LEVEL_HIGH 5>; - clocks = <&isi_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 26>; clock-names = "isi_clk"; status = "disabled"; port { @@ -1125,7 +863,7 @@ reg = <0xfffb8000 0x300>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>; #pwm-cells = <3>; - clocks = <&pwm_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; status = "disabled"; }; @@ -1138,7 +876,7 @@ dma-names = "rxtx"; #address-cells = <1>; #size-cells = <0>; - clocks = <&mci0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; clock-names = "mci_clk"; status = "disabled"; }; @@ -1152,7 +890,7 @@ dma-names = "rxtx"; #address-cells = <1>; #size-cells = <0>; - clocks = <&mci1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 29>; clock-names = "mci_clk"; status = "disabled"; }; @@ -1176,7 +914,7 @@ interrupts = <14 4 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; - clocks = <&spi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; clock-names = "spi_clk"; status = "disabled"; }; @@ -1189,7 +927,7 @@ interrupts = <15 4 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; - clocks = <&spi1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; clock-names = "spi_clk"; status = "disabled"; }; @@ -1201,7 +939,7 @@ reg = <0x00600000 0x80000 0xfff78000 0x400>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&udphs_clk>, <&utmi>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_CORE PMC_UTMI>; clock-names = "pclk", "hclk"; status = "disabled"; @@ -1294,7 +1032,7 @@ interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fb>; - clocks = <&lcd_clk>, <&lcd_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_PERIPHERAL 23>; clock-names = "hclk", "lcdc_clk"; status = "disabled"; }; @@ -1303,7 +1041,7 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00700000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>; clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; @@ -1312,7 +1050,7 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00800000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&utmi>, <&uhphs_clk>; + clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>; clock-names = "usb_clk", "ehci_clk"; status = "disabled"; }; @@ -1330,7 +1068,7 @@ 0x3 0x0 0x40000000 0x10000000 0x4 0x0 0x50000000 0x10000000 0x5 0x0 0x60000000 0x10000000>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; status = "disabled"; nand_controller: nand-controller { diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 84bed6f55fcd..a3a5c82d9f29 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -72,9 +72,9 @@ pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>; resetb-gpios = <&pioD 12 GPIO_ACTIVE_LOW>; pwdn-gpios = <&pioD 13 GPIO_ACTIVE_HIGH>; - clocks = <&pck1>; + clocks = <&pmc PMC_TYPE_SYSTEM 9>; clock-names = "xvclk"; - assigned-clocks = <&pck1>; + assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>; assigned-clock-rates = <25000000>; port { diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index ea675174432e..a994d076dc7e 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -104,7 +104,7 @@ ramc0: ramc@ffffe800 { compatible = "atmel,at91sam9g45-ddramc"; reg = <0xffffe800 0x200>; - clocks = <&ddrck>; + clocks = <&pmc PMC_TYPE_SYSTEM 2>; clock-names = "ddrck"; }; @@ -116,278 +116,10 @@ pmc: pmc@fffffc00 { compatible = "atmel,at91sam9n12-pmc", "syscon"; reg = <0xfffffc00 0x200>; + #clock-cells = <2>; + clocks = <&clk32k>, <&main_xtal>; + clock-names = "slow_clk", "main_xtal"; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - - main_rc_osc: main_rc_osc { - compatible = "atmel,at91sam9x5-clk-main-rc-osc"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_MOSCRCS>; - clock-frequency = <12000000>; - clock-accuracy = <50000000>; - }; - - main_osc: main_osc { - compatible = "atmel,at91rm9200-clk-main-osc"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_MOSCS>; - clocks = <&main_xtal>; - }; - - main: mainck { - compatible = "atmel,at91sam9x5-clk-main"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_MOSCSELS>; - clocks = <&main_rc_osc>, <&main_osc>; - }; - - plla: pllack { - compatible = "atmel,at91rm9200-clk-pll"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_LOCKA>; - clocks = <&main>; - reg = <0>; - atmel,clk-input-range = <2000000 32000000>; - #atmel,pll-clk-output-range-cells = <4>; - atmel,pll-clk-output-ranges = <745000000 800000000 0 0>, - <695000000 750000000 1 0>, - <645000000 700000000 2 0>, - <595000000 650000000 3 0>, - <545000000 600000000 0 1>, - <495000000 555000000 1 1>, - <445000000 500000000 2 1>, - <400000000 450000000 3 1>; - }; - - plladiv: plladivck { - compatible = "atmel,at91sam9x5-clk-plldiv"; - #clock-cells = <0>; - clocks = <&plla>; - }; - - pllb: pllbck { - compatible = "atmel,at91rm9200-clk-pll"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_LOCKB>; - clocks = <&main>; - reg = <1>; - atmel,clk-input-range = <2000000 32000000>; - #atmel,pll-clk-output-range-cells = <3>; - atmel,pll-clk-output-ranges = <30000000 100000000 0>; - }; - - mck: masterck { - compatible = "atmel,at91sam9x5-clk-master"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_MCKRDY>; - clocks = <&clk32k>, <&main>, <&plladiv>, <&pllb>; - atmel,clk-output-range = <0 133333333>; - atmel,clk-divisors = <1 2 4 3>; - atmel,master-clk-have-div3-pres; - }; - - usb: usbck { - compatible = "atmel,at91sam9n12-clk-usb"; - #clock-cells = <0>; - clocks = <&pllb>; - }; - - prog: progck { - compatible = "atmel,at91sam9x5-clk-programmable"; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&pmc>; - clocks = <&clk32k>, <&main>, <&plladiv>, <&pllb>, <&mck>; - - prog0: prog0 { - #clock-cells = <0>; - reg = <0>; - interrupts = <AT91_PMC_PCKRDY(0)>; - }; - - prog1: prog1 { - #clock-cells = <0>; - reg = <1>; - interrupts = <AT91_PMC_PCKRDY(1)>; - }; - }; - - systemck { - compatible = "atmel,at91rm9200-clk-system"; - #address-cells = <1>; - #size-cells = <0>; - - ddrck: ddrck { - #clock-cells = <0>; - reg = <2>; - clocks = <&mck>; - }; - - lcdck: lcdck { - #clock-cells = <0>; - reg = <3>; - clocks = <&mck>; - }; - - uhpck: uhpck { - #clock-cells = <0>; - reg = <6>; - clocks = <&usb>; - }; - - udpck: udpck { - #clock-cells = <0>; - reg = <7>; - clocks = <&usb>; - }; - - pck0: pck0 { - #clock-cells = <0>; - reg = <8>; - clocks = <&prog0>; - }; - - pck1: pck1 { - #clock-cells = <0>; - reg = <9>; - clocks = <&prog1>; - }; - }; - - periphck { - compatible = "atmel,at91sam9x5-clk-peripheral"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&mck>; - - pioAB_clk: pioAB_clk { - #clock-cells = <0>; - reg = <2>; - }; - - pioCD_clk: pioCD_clk { - #clock-cells = <0>; - reg = <3>; - }; - - fuse_clk: fuse_clk { - #clock-cells = <0>; - reg = <4>; - }; - - usart0_clk: usart0_clk { - #clock-cells = <0>; - reg = <5>; - }; - - usart1_clk: usart1_clk { - #clock-cells = <0>; - reg = <6>; - }; - - usart2_clk: usart2_clk { - #clock-cells = <0>; - reg = <7>; - }; - - usart3_clk: usart3_clk { - #clock-cells = <0>; - reg = <8>; - }; - - twi0_clk: twi0_clk { - reg = <9>; - #clock-cells = <0>; - }; - - twi1_clk: twi1_clk { - #clock-cells = <0>; - reg = <10>; - }; - - mci0_clk: mci0_clk { - #clock-cells = <0>; - reg = <12>; - }; - - spi0_clk: spi0_clk { - #clock-cells = <0>; - reg = <13>; - }; - - spi1_clk: spi1_clk { - #clock-cells = <0>; - reg = <14>; - }; - - uart0_clk: uart0_clk { - #clock-cells = <0>; - reg = <15>; - }; - - uart1_clk: uart1_clk { - #clock-cells = <0>; - reg = <16>; - }; - - tcb_clk: tcb_clk { - #clock-cells = <0>; - reg = <17>; - }; - - pwm_clk: pwm_clk { - #clock-cells = <0>; - reg = <18>; - }; - - adc_clk: adc_clk { - #clock-cells = <0>; - reg = <19>; - }; - - dma0_clk: dma0_clk { - #clock-cells = <0>; - reg = <20>; - }; - - uhphs_clk: uhphs_clk { - #clock-cells = <0>; - reg = <22>; - }; - - udphs_clk: udphs_clk { - #clock-cells = <0>; - reg = <23>; - }; - - lcdc_clk: lcdc_clk { - #clock-cells = <0>; - reg = <25>; - }; - - sha_clk: sha_clk { - #clock-cells = <0>; - reg = <27>; - }; - - ssc0_clk: ssc0_clk { - #clock-cells = <0>; - reg = <28>; - }; - - aes_clk: aes_clk { - #clock-cells = <0>; - reg = <29>; - }; - - trng_clk: trng_clk { - #clock-cells = <0>; - reg = <30>; - }; - }; }; rstc@fffffe00 { @@ -400,7 +132,7 @@ compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; }; shdwc@fffffe10 { @@ -439,7 +171,7 @@ interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; - clocks = <&mci0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 12>; clock-names = "mci_clk"; #address-cells = <1>; #size-cells = <0>; @@ -452,7 +184,7 @@ #size-cells = <0>; reg = <0xf8008000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb_clk>, <&clk32k>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>; clock-names = "t0_clk", "slow_clk"; }; @@ -462,7 +194,7 @@ #size-cells = <0>; reg = <0xf800c000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb_clk>, <&clk32k>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>; clock-names = "t0_clk", "slow_clk"; }; @@ -470,7 +202,7 @@ compatible = "atmel,at91sam9n12-hlcdc"; reg = <0xf8038000 0x2000>; interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>; clock-names = "periph_clk", "sys_clk", "slow_clk"; status = "disabled"; @@ -499,7 +231,7 @@ reg = <0xffffec00 0x200>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; - clocks = <&dma0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; clock-names = "dma_clk"; }; @@ -817,7 +549,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioAB_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; }; pioB: gpio@fffff600 { @@ -828,7 +560,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioAB_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; }; pioC: gpio@fffff800 { @@ -839,7 +571,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioCD_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 3>; }; pioD: gpio@fffffa00 { @@ -850,7 +582,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioCD_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 3>; }; }; @@ -860,7 +592,7 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; clock-names = "usart"; status = "disabled"; }; @@ -874,7 +606,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; - clocks = <&ssc0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 28>; clock-names = "pclk"; status = "disabled"; }; @@ -885,7 +617,7 @@ interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; - clocks = <&usart0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; clock-names = "usart"; status = "disabled"; }; @@ -896,7 +628,7 @@ interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; - clocks = <&usart1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; clock-names = "usart"; status = "disabled"; }; @@ -907,7 +639,7 @@ interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; - clocks = <&usart2_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; clock-names = "usart"; status = "disabled"; }; @@ -918,7 +650,7 @@ interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; - clocks = <&usart3_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; clock-names = "usart"; status = "disabled"; }; @@ -934,7 +666,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; - clocks = <&twi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; status = "disabled"; }; @@ -949,7 +681,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; - clocks = <&twi1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; status = "disabled"; }; @@ -964,7 +696,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; - clocks = <&spi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; clock-names = "spi_clk"; status = "disabled"; }; @@ -980,7 +712,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; - clocks = <&spi1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; clock-names = "spi_clk"; status = "disabled"; }; @@ -1009,7 +741,7 @@ reg = <0xf8034000 0x300>; interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>; #pwm-cells = <3>; - clocks = <&pwm_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 18>; status = "disabled"; }; @@ -1017,7 +749,7 @@ compatible = "atmel,at91sam9260-udc"; reg = <0xf803c000 0x4000>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&udphs_clk>, <&udpck>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_SYSTEM 7>; clock-names = "pclk", "hclk"; status = "disabled"; }; @@ -1027,7 +759,7 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x00100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>; clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; @@ -1045,7 +777,7 @@ 0x3 0x0 0x40000000 0x10000000 0x4 0x0 0x50000000 0x10000000 0x5 0x0 0x60000000 0x10000000>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; status = "disabled"; nand_controller: nand-controller { diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index d36e162a8817..870b83ff6b97 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -59,7 +59,7 @@ wm8904: codec@1a { compatible = "wlf,wm8904"; reg = <0x1a>; - clocks = <&pck0>; + clocks = <&pmc PMC_TYPE_SYSTEM 8>; clock-names = "mclk"; }; diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts index e26ea9006378..c7f1d97e69bb 100644 --- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts +++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts @@ -56,6 +56,16 @@ 3300000 0x0>; status = "okay"; }; + + sd_vcc_reg: sd_vcc_reg { + compatible = "regulator-fixed"; + regulator-name = "vcc-sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>; + }; }; &firmware { @@ -69,7 +79,7 @@ "GLOBAL_RESET", "VDD_SD_IO_SEL", "CAM_GPIO", - "", + "SD_PWR_ON", ""; status = "okay"; }; @@ -174,6 +184,7 @@ /* EMMC2 is used to drive the SD card */ &emmc2 { vqmmc-supply = <&sd_io_1v8_reg>; + vmmc-supply = <&sd_vcc_reg>; broken-cd; status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm2835-common.dtsi b/arch/arm/boot/dts/bcm2835-common.dtsi index 2b1d9d4c0cde..4119271c979d 100644 --- a/arch/arm/boot/dts/bcm2835-common.dtsi +++ b/arch/arm/boot/dts/bcm2835-common.dtsi @@ -130,7 +130,6 @@ compatible = "brcm,bcm2835-v3d"; reg = <0x7ec00000 0x1000>; interrupts = <1 10>; - power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>; }; vc4: gpu { diff --git a/arch/arm/boot/dts/bcm2835-rpi-common.dtsi b/arch/arm/boot/dts/bcm2835-rpi-common.dtsi new file mode 100644 index 000000000000..8a55b6cded59 --- /dev/null +++ b/arch/arm/boot/dts/bcm2835-rpi-common.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * This include file covers the common peripherals and configuration between + * bcm2835, bcm2836 and bcm2837 implementations that interact with RPi's + * firmware interface. + */ + +#include <dt-bindings/power/raspberrypi-power.h> + +&v3d { + power-domains = <&power RPI_POWER_DOMAIN_V3D>; +}; diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index 53bf4579cc22..0549686134ea 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 #include "bcm283x.dtsi" #include "bcm2835-common.dtsi" +#include "bcm2835-rpi-common.dtsi" / { compatible = "brcm,bcm2835"; diff --git a/arch/arm/boot/dts/bcm2836.dtsi b/arch/arm/boot/dts/bcm2836.dtsi index 82d6c4662ae4..b390006aef79 100644 --- a/arch/arm/boot/dts/bcm2836.dtsi +++ b/arch/arm/boot/dts/bcm2836.dtsi @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 #include "bcm283x.dtsi" #include "bcm2835-common.dtsi" +#include "bcm2835-rpi-common.dtsi" / { compatible = "brcm,bcm2836"; diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi index 9e95fee78e19..0199ec98cd61 100644 --- a/arch/arm/boot/dts/bcm2837.dtsi +++ b/arch/arm/boot/dts/bcm2837.dtsi @@ -1,5 +1,6 @@ #include "bcm283x.dtsi" #include "bcm2835-common.dtsi" +#include "bcm2835-rpi-common.dtsi" / { compatible = "brcm,bcm2837"; diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi index d2f7d984bba5..3ab3cd250da7 100644 --- a/arch/arm/boot/dts/berlin2.dtsi +++ b/arch/arm/boot/dts/berlin2.dtsi @@ -77,7 +77,7 @@ ranges = <0 0xf7000000 0x1000000>; - sdhci0: sdhci@ab0000 { + sdhci0: mmc@ab0000 { compatible = "mrvl,pxav3-mmc"; reg = <0xab0000 0x200>; clocks = <&chip_clk CLKID_SDIO0XIN>, <&chip_clk CLKID_SDIO0>; @@ -86,7 +86,7 @@ status = "disabled"; }; - sdhci1: sdhci@ab0800 { + sdhci1: mmc@ab0800 { compatible = "mrvl,pxav3-mmc"; reg = <0xab0800 0x200>; clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO1>; @@ -95,7 +95,7 @@ status = "disabled"; }; - sdhci2: sdhci@ab1000 { + sdhci2: mmc@ab1000 { compatible = "mrvl,pxav3-mmc"; reg = <0xab1000 0x200>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi index e5c1f4213ff9..7cf3e6302d75 100644 --- a/arch/arm/boot/dts/berlin2cd.dtsi +++ b/arch/arm/boot/dts/berlin2cd.dtsi @@ -62,7 +62,7 @@ ranges = <0 0xf7000000 0x1000000>; - sdhci0: sdhci@ab0000 { + sdhci0: mmc@ab0000 { compatible = "mrvl,pxav3-mmc"; reg = <0xab0000 0x200>; clocks = <&chip_clk CLKID_SDIO0XIN>, <&chip_clk CLKID_SDIO0>; diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index 99d6872a6dfc..c44a32e873f4 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -122,7 +122,7 @@ ranges = <0 0xf7000000 0x1000000>; interrupt-parent = <&gic>; - sdhci0: sdhci@ab0000 { + sdhci0: mmc@ab0000 { compatible = "mrvl,pxav3-mmc"; reg = <0xab0000 0x200>; clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO>; @@ -131,7 +131,7 @@ status = "disabled"; }; - sdhci1: sdhci@ab0800 { + sdhci1: mmc@ab0800 { compatible = "mrvl,pxav3-mmc"; reg = <0xab0800 0x200>; clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO>; @@ -140,7 +140,7 @@ status = "disabled"; }; - sdhci2: sdhci@ab1000 { + sdhci2: mmc@ab1000 { compatible = "mrvl,pxav3-mmc"; reg = <0xab1000 0x200>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 3081b04e8c08..89e0bdaf3a85 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -175,7 +175,6 @@ #size-cells = <0>; interrupts = <11>; clock-frequency = <400000>; - timeout-ms = <1000>; clocks = <&core_clk 0>; status = "okay"; }; @@ -248,7 +247,7 @@ marvell,#interrupts = <5>; }; - intc: main-interrupt-ctrl@20200 { + intc: interrupt-controller@20200 { compatible = "marvell,orion-intc"; interrupt-controller; #interrupt-cells = <1>; diff --git a/arch/arm/boot/dts/dra7-evm-common.dtsi b/arch/arm/boot/dts/dra7-evm-common.dtsi index 23244b5a9942..f89a64cbcd53 100644 --- a/arch/arm/boot/dts/dra7-evm-common.dtsi +++ b/arch/arm/boot/dts/dra7-evm-common.dtsi @@ -3,6 +3,7 @@ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ */ +#include "dra74-ipu-dsp-common.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/clock/ti-dra7-atl.h> #include <dt-bindings/input/input.h> diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index af06a55d1c5c..7aeb30daf3b8 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -35,6 +35,40 @@ regulator-max-microvolt = <1800000>; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ipu2_memory_region: ipu2-memory@95800000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x95800000 0x0 0x3800000>; + reusable; + status = "okay"; + }; + + dsp1_memory_region: dsp1-memory@99000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x99000000 0x0 0x4000000>; + reusable; + status = "okay"; + }; + + ipu1_memory_region: ipu1-memory@9d000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x9d000000 0x0 0x2000000>; + reusable; + status = "okay"; + }; + + dsp2_memory_region: dsp2-memory@9f000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x9f000000 0x0 0x800000>; + reusable; + status = "okay"; + }; + }; + evm_3v3_sd: fixedregulator-sd { compatible = "regulator-fixed"; regulator-name = "evm_3v3_sd"; @@ -537,3 +571,23 @@ pinctrl-1 = <&dcan1_pins_sleep>; pinctrl-2 = <&dcan1_pins_default>; }; + +&ipu2 { + status = "okay"; + memory-region = <&ipu2_memory_region>; +}; + +&ipu1 { + status = "okay"; + memory-region = <&ipu1_memory_region>; +}; + +&dsp1 { + status = "okay"; + memory-region = <&dsp1_memory_region>; +}; + +&dsp2 { + status = "okay"; + memory-region = <&dsp2_memory_region>; +}; diff --git a/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi b/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi new file mode 100644 index 000000000000..a25749a1c365 --- /dev/null +++ b/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Common IPU and DSP data for TI DRA7xx/AM57xx platforms + */ + +&mailbox5 { + status = "okay"; + mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + status = "okay"; + }; + mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + status = "okay"; + }; +}; + +&mailbox6 { + status = "okay"; + mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + status = "okay"; + }; +}; + +&ipu2 { + mboxes = <&mailbox6 &mbox_ipu2_ipc3x>; + ti,timers = <&timer3>; + ti,watchdog-timers = <&timer4>, <&timer9>; +}; + +&ipu1 { + mboxes = <&mailbox5 &mbox_ipu1_ipc3x>; + ti,timers = <&timer11>; + ti,watchdog-timers = <&timer7>, <&timer8>; +}; + +&dsp1 { + mboxes = <&mailbox5 &mbox_dsp1_ipc3x>; + ti,timers = <&timer5>; + ti,watchdog-timers = <&timer10>; +}; diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi index fc728c606eef..62ca89551219 100644 --- a/arch/arm/boot/dts/dra7-l4.dtsi +++ b/arch/arm/boot/dts/dra7-l4.dtsi @@ -1162,8 +1162,8 @@ timer2: timer@0 { compatible = "ti,omap5430-timer"; reg = <0x0 0x80>; - clocks = <&l4per_clkctrl DRA7_L4PER_TIMER2_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&l4per_clkctrl DRA7_L4PER_TIMER2_CLKCTRL 24>, <&timer_sys_clk_div>; + clock-names = "fck", "timer_sys_ck"; interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -1189,8 +1189,8 @@ timer3: timer@0 { compatible = "ti,omap5430-timer"; reg = <0x0 0x80>; - clocks = <&l4per_clkctrl DRA7_L4PER_TIMER3_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&l4per_clkctrl DRA7_L4PER_TIMER3_CLKCTRL 24>, <&timer_sys_clk_div>; + clock-names = "fck", "timer_sys_ck"; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -1207,8 +1207,9 @@ <SYSC_IDLE_SMART>, <SYSC_IDLE_SMART_WKUP>; /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ - clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 0>; - clock-names = "fck"; + clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 0>, + <&timer_sys_clk_div>; + clock-names = "fck", "timer_sys_ck"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x36000 0x1000>; @@ -1216,8 +1217,8 @@ timer4: timer@0 { compatible = "ti,omap5430-timer"; reg = <0x0 0x80>; - clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 24>, <&timer_sys_clk_div>; + clock-names = "fck", "timer_sys_ck"; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -1243,8 +1244,8 @@ timer9: timer@0 { compatible = "ti,omap5430-timer"; reg = <0x0 0x80>; - clocks = <&l4per_clkctrl DRA7_L4PER_TIMER9_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&l4per_clkctrl DRA7_L4PER_TIMER9_CLKCTRL 24>, <&timer_sys_clk_div>; + clock-names = "fck", "timer_sys_ck"; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -1850,8 +1851,8 @@ timer10: timer@0 { compatible = "ti,omap5430-timer"; reg = <0x0 0x80>; - clocks = <&l4per_clkctrl DRA7_L4PER_TIMER10_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&l4per_clkctrl DRA7_L4PER_TIMER10_CLKCTRL 24>, <&timer_sys_clk_div>; + clock-names = "fck", "timer_sys_ck"; interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -1877,8 +1878,8 @@ timer11: timer@0 { compatible = "ti,omap5430-timer"; reg = <0x0 0x80>; - clocks = <&l4per_clkctrl DRA7_L4PER_TIMER11_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&l4per_clkctrl DRA7_L4PER_TIMER11_CLKCTRL 24>, <&timer_sys_clk_div>; + clock-names = "fck", "timer_sys_ck"; interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -3351,8 +3352,8 @@ <SYSC_IDLE_SMART>, <SYSC_IDLE_SMART_WKUP>; /* Domains (P, C): ipu_pwrdm, ipu_clkdm */ - clocks = <&ipu_clkctrl DRA7_IPU_TIMER5_CLKCTRL 0>; - clock-names = "fck"; + clocks = <&ipu_clkctrl DRA7_IPU_TIMER5_CLKCTRL 0>, <&timer_sys_clk_div>; + clock-names = "fck", "timer_sys_ck"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x20000 0x1000>; @@ -3378,8 +3379,9 @@ <SYSC_IDLE_SMART>, <SYSC_IDLE_SMART_WKUP>; /* Domains (P, C): ipu_pwrdm, ipu_clkdm */ - clocks = <&ipu_clkctrl DRA7_IPU_TIMER6_CLKCTRL 0>; - clock-names = "fck"; + clocks = <&ipu_clkctrl DRA7_IPU_TIMER6_CLKCTRL 0>, + <&timer_sys_clk_div>; + clock-names = "fck", "timer_sys_ck"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x22000 0x1000>; @@ -3414,8 +3416,8 @@ timer7: timer@0 { compatible = "ti,omap5430-timer"; reg = <0x0 0x80>; - clocks = <&ipu_clkctrl DRA7_IPU_TIMER7_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&ipu_clkctrl DRA7_IPU_TIMER7_CLKCTRL 24>, <&timer_sys_clk_div>; + clock-names = "fck", "timer_sys_ck"; interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -3441,8 +3443,8 @@ timer8: timer@0 { compatible = "ti,omap5430-timer"; reg = <0x0 0x80>; - clocks = <&ipu_clkctrl DRA7_IPU_TIMER8_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&ipu_clkctrl DRA7_IPU_TIMER8_CLKCTRL 24>, <&timer_sys_clk_div>; + clock-names = "fck", "timer_sys_ck"; interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -3468,8 +3470,8 @@ timer13: timer@0 { compatible = "ti,omap5430-timer"; reg = <0x0 0x80>; - clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER13_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER13_CLKCTRL 24>, <&timer_sys_clk_div>; + clock-names = "fck", "timer_sys_ck"; interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>; ti,timer-pwm; }; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 15225a39b28c..099546be5014 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -410,6 +410,42 @@ ti,hwmods = "dmm"; }; + ipu1: ipu@58820000 { + compatible = "ti,dra7-ipu"; + reg = <0x58820000 0x10000>; + reg-names = "l2ram"; + iommus = <&mmu_ipu1>; + status = "disabled"; + resets = <&prm_ipu 0>, <&prm_ipu 1>; + clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 0>; + firmware-name = "dra7-ipu1-fw.xem4"; + }; + + ipu2: ipu@55020000 { + compatible = "ti,dra7-ipu"; + reg = <0x55020000 0x10000>; + reg-names = "l2ram"; + iommus = <&mmu_ipu2>; + status = "disabled"; + resets = <&prm_core 0>, <&prm_core 1>; + clocks = <&ipu2_clkctrl DRA7_IPU2_MMU_IPU2_CLKCTRL 0>; + firmware-name = "dra7-ipu2-fw.xem4"; + }; + + dsp1: dsp@40800000 { + compatible = "ti,dra7-dsp"; + reg = <0x40800000 0x48000>, + <0x40e00000 0x8000>, + <0x40f00000 0x8000>; + reg-names = "l2ram", "l1pram", "l1dram"; + ti,bootreg = <&scm_conf 0x55c 10>; + iommus = <&mmu0_dsp1>, <&mmu1_dsp1>; + status = "disabled"; + resets = <&prm_dsp1 0>; + clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>; + firmware-name = "dra7-dsp1-fw.xe66"; + }; + target-module@40d01000 { compatible = "ti,sysc-omap2", "ti,sysc"; reg = <0x40d01000 0x4>, diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts index fabeb7704753..a5d275ea7bd3 100644 --- a/arch/arm/boot/dts/dra71-evm.dts +++ b/arch/arm/boot/dts/dra71-evm.dts @@ -17,6 +17,33 @@ reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */ }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ipu2_memory_region: ipu2-memory@95800000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x95800000 0x0 0x3800000>; + reusable; + status = "okay"; + }; + + dsp1_memory_region: dsp1-memory@99000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x99000000 0x0 0x4000000>; + reusable; + status = "okay"; + }; + + ipu1_memory_region: ipu1-memory@9d000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x9d000000 0x0 0x2000000>; + reusable; + status = "okay"; + }; + }; + vpo_sd_1v8_3v3: gpio-regulator-TPS74801 { compatible = "regulator-gpio"; @@ -270,3 +297,18 @@ &extcon_usb2 { vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>; }; + +&ipu2 { + status = "okay"; + memory-region = <&ipu2_memory_region>; +}; + +&ipu1 { + status = "okay"; + memory-region = <&ipu1_memory_region>; +}; + +&dsp1 { + status = "okay"; + memory-region = <&dsp1_memory_region>; +}; diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi index 01558a86af82..c84b63bf0fc8 100644 --- a/arch/arm/boot/dts/dra72-evm-common.dtsi +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi @@ -5,6 +5,7 @@ /dts-v1/; #include "dra72x.dtsi" +#include "dra7-ipu-dsp-common.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/clock/ti-dra7-atl.h> @@ -583,23 +584,6 @@ rx-num-evt = <32>; }; -&mailbox5 { - status = "okay"; - mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { - status = "okay"; - }; - mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { - status = "okay"; - }; -}; - -&mailbox6 { - status = "okay"; - mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { - status = "okay"; - }; -}; - &pcie1_rc { status = "okay"; }; diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts index 2bb2e8be6276..6e70858f6313 100644 --- a/arch/arm/boot/dts/dra72-evm-revc.dts +++ b/arch/arm/boot/dts/dra72-evm-revc.dts @@ -14,6 +14,33 @@ reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */ }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ipu2_cma_pool: ipu2_cma@95800000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x95800000 0x0 0x3800000>; + reusable; + status = "okay"; + }; + + dsp1_cma_pool: dsp1_cma@99000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x99000000 0x0 0x4000000>; + reusable; + status = "okay"; + }; + + ipu1_cma_pool: ipu1_cma@9d000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x9d000000 0x0 0x2000000>; + reusable; + status = "okay"; + }; + }; + evm_1v8_sw: fixedregulator-evm_1v8 { compatible = "regulator-fixed"; regulator-name = "evm_1v8"; @@ -113,3 +140,18 @@ pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>; vmmc-supply = <&evm_1v8_sw>; }; + +&ipu2 { + status = "okay"; + memory-region = <&ipu2_cma_pool>; +}; + +&ipu1 { + status = "okay"; + memory-region = <&ipu1_cma_pool>; +}; + +&dsp1 { + status = "okay"; + memory-region = <&dsp1_cma_pool>; +}; diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 9adb77585ef1..951152fe206a 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -12,6 +12,33 @@ reg = <0x0 0x80000000 0x0 0x40000000>; /* 1024 MB */ }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ipu2_memory_region: ipu2-memory@95800000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x95800000 0x0 0x3800000>; + reusable; + status = "okay"; + }; + + dsp1_memory_region: dsp1-memory@99000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x99000000 0x0 0x4000000>; + reusable; + status = "okay"; + }; + + ipu1_memory_region: ipu1-memory@9d000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x9d000000 0x0 0x2000000>; + reusable; + status = "okay"; + }; + }; + evm_1v8_sw: fixedregulator-evm_1v8 { compatible = "regulator-fixed"; regulator-name = "evm_1v8"; @@ -78,3 +105,18 @@ pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev10_conf>; vmmc-supply = <&evm_1v8_sw>; }; + +&ipu2 { + status = "okay"; + memory-region = <&ipu2_memory_region>; +}; + +&ipu1 { + status = "okay"; + memory-region = <&ipu1_memory_region>; +}; + +&dsp1 { + status = "okay"; + memory-region = <&dsp1_memory_region>; +}; diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi index da334489b18f..ae23ec14e8fa 100644 --- a/arch/arm/boot/dts/dra72x.dtsi +++ b/arch/arm/boot/dts/dra72x.dtsi @@ -10,6 +10,12 @@ / { compatible = "ti,dra722", "ti,dra72", "ti,dra7"; + aliases { + rproc0 = &ipu1; + rproc1 = &ipu2; + rproc2 = &dsp1; + }; + pmu { compatible = "arm,cortex-a15-pmu"; interrupt-parent = <&wakeupgen>; diff --git a/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi b/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi new file mode 100644 index 000000000000..b1147a4b77f9 --- /dev/null +++ b/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Common IPU and DSP data for TI DRA74x/DRA76x/AM572x/AM574x platforms + */ + +#include "dra7-ipu-dsp-common.dtsi" + +&mailbox6 { + mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { + status = "okay"; + }; +}; + +&dsp2 { + mboxes = <&mailbox6 &mbox_dsp2_ipc3x>; + ti,timers = <&timer6>; + ti,watchdog-timers = <&timer13>; +}; diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index 7b1c61298253..46d8e7615180 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -29,6 +29,13 @@ }; }; + aliases { + rproc0 = &ipu1; + rproc1 = &ipu2; + rproc2 = &dsp1; + rproc3 = &dsp2; + }; + pmu { compatible = "arm,cortex-a15-pmu"; interrupt-parent = <&wakeupgen>; @@ -124,6 +131,20 @@ ti,syscon-mmuconfig = <&dsp2_system 0x1>; }; }; + + dsp2: dsp@41000000 { + compatible = "ti,dra7-dsp"; + reg = <0x41000000 0x48000>, + <0x41600000 0x8000>, + <0x41700000 0x8000>; + reg-names = "l2ram", "l1pram", "l1dram"; + ti,bootreg = <&scm_conf 0x560 10>; + iommus = <&mmu0_dsp2>, <&mmu1_dsp2>; + status = "disabled"; + resets = <&prm_dsp2 0>; + clocks = <&dsp2_clkctrl DRA7_DSP2_MMU0_DSP2_CLKCTRL 0>; + firmware-name = "dra7-dsp2-fw.xe66"; + }; }; }; diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts index e958cb3d1b31..820a0ece20d4 100644 --- a/arch/arm/boot/dts/dra76-evm.dts +++ b/arch/arm/boot/dts/dra76-evm.dts @@ -25,6 +25,40 @@ reg = <0x0 0x80000000 0x0 0x80000000>; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ipu2_cma_pool: ipu2_cma@95800000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x95800000 0x0 0x3800000>; + reusable; + status = "okay"; + }; + + dsp1_cma_pool: dsp1_cma@99000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x99000000 0x0 0x4000000>; + reusable; + status = "okay"; + }; + + ipu1_cma_pool: ipu1_cma@9d000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x9d000000 0x0 0x2000000>; + reusable; + status = "okay"; + }; + + dsp2_cma_pool: dsp2_cma@9f000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x9f000000 0x0 0x800000>; + reusable; + status = "okay"; + }; + }; + vsys_12v0: fixedregulator-vsys12v0 { /* main supply */ compatible = "regulator-fixed"; @@ -548,3 +582,23 @@ data-lanes = <1 2>; }; }; + +&ipu2 { + status = "okay"; + memory-region = <&ipu2_cma_pool>; +}; + +&ipu1 { + status = "okay"; + memory-region = <&ipu1_cma_pool>; +}; + +&dsp1 { + status = "okay"; + memory-region = <&dsp1_cma_pool>; +}; + +&dsp2 { + status = "okay"; + memory-region = <&dsp2_cma_pool>; +}; diff --git a/arch/arm/boot/dts/e60k02.dtsi b/arch/arm/boot/dts/e60k02.dtsi index ce50c4dc6f2a..3af1ab4458ef 100644 --- a/arch/arm/boot/dts/e60k02.dtsi +++ b/arch/arm/boot/dts/e60k02.dtsi @@ -117,6 +117,8 @@ ricoh619: pmic@32 { compatible = "ricoh,rc5t619"; reg = <0x32>; + interrupt-parent = <&gpio5>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; system-power-controller; regulators { diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index 248bd372fe70..ca29d7ed8216 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -57,7 +57,8 @@ i2c_max77836: i2c-gpio-0 { compatible = "i2c-gpio"; - gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpd0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpd0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 86c26a4edfd7..aba8350cfdaf 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -50,9 +50,15 @@ }; }; + wlan_pwrseq: mshc1-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>; + }; + i2c_max77836: i2c-gpio-0 { compatible = "i2c-gpio"; - gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpd0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpd0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; #address-cells = <1>; #size-cells = <0>; @@ -605,8 +611,6 @@ }; &mshc_0 { - #address-cells = <1>; - #size-cells = <0>; broken-cd; non-removable; cap-mmc-highspeed; @@ -625,10 +629,48 @@ status = "okay"; }; +&mshc_1 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + non-removable; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + samsung,dw-mshc-ciu-div = <1>; + samsung,dw-mshc-sdr-timing = <0 1>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus1 &sd1_bus4>; + bus-width = <4>; + + mmc-pwrseq = <&wlan_pwrseq>; + + brcmf: wifi@1 { + compatible = "brcm,bcm4334-fmac"; + reg = <1>; + + interrupt-parent = <&gpx1>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + }; +}; + &serial_0 { assigned-clocks = <&cmu CLK_SCLK_UART0>; assigned-clock-rates = <100000000>; status = "okay"; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + max-speed = <3000000>; + shutdown-gpios = <&gpe0 0 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>; + clocks = <&s2mps14_osc S2MPS11_CLK_BT>; + }; }; &serial_1 { diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts new file mode 100644 index 000000000000..6d0c04d77a39 --- /dev/null +++ b/arch/arm/boot/dts/exynos4210-i9100.dts @@ -0,0 +1,768 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung's Exynos4210 based Galaxy S2 (GT-I9100 version) device tree + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2020 Stenkin Evgeniy <stenkinevgeniy@gmail.com> + * Copyright (c) 2020 Paul Cercueil <paul@crapouillou.net> + */ + +/dts-v1/; +#include "exynos4210.dtsi" +#include "exynos4412-ppmu-common.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> + +/ { + model = "Samsung Galaxy S2 (GT-I9100)"; + compatible = "samsung,i9100", "samsung,exynos4210", "samsung,exynos4"; + + memory@40000000 { + device_type = "memory"; + reg = <0x40000000 0x40000000>; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + vemmc_reg: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "VMEM_VDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + tsp_reg: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "TSP_FIXED_VOLTAGES"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + regulator-boot-on; + regulator-always-on; + }; + + cam_af_28v_reg: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "8M_AF_2.8V_EN"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + cam_io_en_reg: regulator-3 { + compatible = "regulator-fixed"; + regulator-name = "CAM_IO_EN"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + cam_io_12v_reg: regulator-4 { + compatible = "regulator-fixed"; + regulator-name = "8M_1.2V_EN"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vt_core_15v_reg: regulator-5 { + compatible = "regulator-fixed"; + regulator-name = "VT_CORE_1.5V"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + gpio-keys { + compatible = "gpio-keys"; + + vol-down { + gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + label = "volume down"; + debounce-interval = <10>; + }; + + vol-up { + gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + label = "volume up"; + debounce-interval = <10>; + }; + + power { + gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + label = "power"; + debounce-interval = <10>; + wakeup-source; + }; + + ok { + gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_OK>; + label = "ok"; + debounce-interval = <10>; + }; + }; + + wlan_pwrseq: sdhci3-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpl1 2 GPIO_ACTIVE_LOW>; + }; + + i2c_max17042_fuel: i2c-gpio { + compatible = "i2c-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + sda-gpios = <&gpy4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpy4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <5>; + + battery@36 { + compatible = "maxim,max17042"; + + interrupt-parent = <&gpx2>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&max17042_fuel_irq>; + pinctrl-names = "default"; + + reg = <0x36>; + maxim,over-heat-temp = <700>; + maxim,over-volt = <4500>; + }; + }; + + spi-lcd { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + num-chipselects = <1>; + cs-gpios = <&gpy4 3 GPIO_ACTIVE_LOW>; + sck-gpios = <&gpy3 1 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpy3 3 GPIO_ACTIVE_HIGH>; + + lcd@0 { + compatible = "samsung,ld9040"; + reg = <0>; + + spi-max-frequency = <1200000>; + + vdd3-supply = <&vmipi_reg>; + vci-supply = <&vcclcd_reg>; + + reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>; + power-on-delay = <10>; + reset-delay = <10>; + + panel-width-mm = <90>; + panel-height-mm = <154>; + + display-timings { + timing { + clock-frequency = <23492370>; + hactive = <480>; + vactive = <800>; + hback-porch = <16>; + hfront-porch = <16>; + vback-porch = <2>; + vfront-porch = <28>; + hsync-len = <2>; + vsync-len = <1>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <0>; + pixelclk-active = <0>; + }; + }; + + port { + lcd_ep: endpoint { + remote-endpoint = <&fimd_dpi_ep>; + }; + }; + }; + }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <0>; + }; + + xusbxti { + compatible = "samsung,clock-xusbxti"; + clock-frequency = <24000000>; + }; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + cooling-maps { + map0 { + /* Corresponds to 800MHz */ + cooling-device = <&cpu0 2 2>; + }; + map1 { + /* Corresponds to 200MHz */ + cooling-device = <&cpu0 4 4>; + }; + }; + }; + }; +}; + +&camera { + status = "okay"; +}; + +&cpu0 { + cpu0-supply = <&varm_breg>; +}; + +&ehci { + status = "okay"; + + phys = <&exynos_usbphy 1>; + phy-names = "host"; +}; + +&exynos_usbphy { + status = "okay"; + + vbus-supply = <&safe1_sreg>; +}; + +&fimc_0 { + status = "okay"; + + assigned-clocks = <&clock CLK_MOUT_FIMC0>, <&clock CLK_SCLK_FIMC0>; + assigned-clock-parents = <&clock CLK_SCLK_MPLL>; + assigned-clock-rates = <0>, <160000000>; +}; + +&fimc_1 { + status = "okay"; + + assigned-clocks = <&clock CLK_MOUT_FIMC1>, <&clock CLK_SCLK_FIMC1>; + assigned-clock-parents = <&clock CLK_SCLK_MPLL>; + assigned-clock-rates = <0>, <160000000>; +}; + +&fimc_2 { + status = "okay"; + + assigned-clocks = <&clock CLK_MOUT_FIMC2>, <&clock CLK_SCLK_FIMC2>; + assigned-clock-parents = <&clock CLK_SCLK_MPLL>; + assigned-clock-rates = <0>, <160000000>; +}; + +&fimc_3 { + status = "okay"; + + assigned-clocks = <&clock CLK_MOUT_FIMC3>, <&clock CLK_SCLK_FIMC3>; + assigned-clock-parents = <&clock CLK_SCLK_MPLL>; + assigned-clock-rates = <0>, <160000000>; +}; + +&fimd { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + samsung,invert-vden; + samsung,invert-vclk; + + pinctrl-0 = <&lcd_clk>, <&lcd_data24>; + pinctrl-names = "default"; + + port@3 { + reg = <3>; + + fimd_dpi_ep: endpoint { + remote-endpoint = <&lcd_ep>; + }; + }; +}; + +&gpu { + status = "okay"; + + mali-supply = <&vg3d_breg>; + regulator-microvolt-offset = <50000>; + regulator-microsecs-delay = <50>; +}; + +&hsotg { + status = "okay"; + + dr_mode = "otg"; + vusb_d-supply = <&vusb_reg>; + vusb_a-supply = <&vusbdac_reg>; +}; + +&i2c_3 { + status = "okay"; + + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + + pinctrl-0 = <&i2c3_bus>; + pinctrl-names = "default"; + + mxt224-touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + + interrupt-parent = <&gpx0>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&i2c_5 { + status = "okay"; + + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + + pinctrl-0 = <&i2c5_bus>; + pinctrl-names = "default"; + + max8997_pmic@66 { + compatible = "maxim,max8997-pmic"; + reg = <0x66>; + + interrupts-extended = <&gpx0 7 IRQ_TYPE_NONE>, + <&gpx2 3 IRQ_TYPE_EDGE_FALLING>; + + max8997,pmic-buck1-uses-gpio-dvs; + max8997,pmic-buck2-uses-gpio-dvs; + max8997,pmic-buck5-uses-gpio-dvs; + + max8997,pmic-ignore-gpiodvs-side-effect; + max8997,pmic-buck125-default-dvs-idx = <0>; + + max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>, + <&gpx0 6 GPIO_ACTIVE_HIGH>, + <&gpl0 0 GPIO_ACTIVE_HIGH>; + + max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>, + <1250000>, <1200000>, + <1150000>, <1100000>, + <1000000>, <950000>; + + max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>, + <950000>, <900000>, + <1100000>, <1000000>, + <950000>, <900000>; + + max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>; + + pinctrl-0 = <&max8997_irq>, <&otg_gp>, <&usb_sel>; + pinctrl-names = "default"; + + regulators { + vadc_reg: LDO1 { + regulator-name = "VADC_3.3V_C210"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + + }; + valive_reg: LDO2 { + regulator-name = "VALIVE_1.1V_C210"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + + }; + + vusb_reg: LDO3 { + regulator-name = "VUSB_1.1V_C210"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + vmipi_reg: LDO4 { + regulator-name = "VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vhsic_reg: LDO5 { + regulator-name = "VHSIC_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vpda_reg: LDO6 { + regulator-name = "VCC_1.8V_PDA"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcam_reg: LDO7 { + regulator-name = "CAM_ISP_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vusbdac_reg: LDO8 { + regulator-name = "VUSB+VDAC_3.3V_C210"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vccpda_reg: LDO9 { + regulator-name = "VCC_2.8V_PDA"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + vtouch_reg: LDO11 { + regulator-name = "TOUCH_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + vpll_reg: LDO10 { + regulator-name = "VPLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + vtcam_reg: LDO12 { + regulator-name = "VT_CAM_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vcclcd_reg: LDO13 { + regulator-name = "VCC_3.0V_LCD"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + vmotor_reg: LDO14 { + regulator-name = "VCC_2.8V_MOTOR"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + vled_reg: LDO15 { + regulator-name = "LED_A_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + camsensor_reg: LDO16 { + regulator-name = "CAM_SENSOR_IO_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vtf_reg: LDO17 { + regulator-name = "VTF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + vtouchled_reg: LDO18 { + regulator-name = "TOUCH_LED_3.3V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + }; + + vddq_reg: LDO21 { + regulator-name = "VDDQ_M1M2_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + varm_breg: BUCK1 { + regulator-name = "VARM_1.2V_C210"; + regulator-min-microvolt = <65000>; + regulator-max-microvolt = <2225000>; + regulator-always-on; + }; + + vint_breg: BUCK2 { + regulator-name = "VINT_1.1V_C210"; + regulator-min-microvolt = <65000>; + regulator-max-microvolt = <2225000>; + regulator-always-on; + }; + + vg3d_breg: BUCK3 { + regulator-name = "G3D_1.1V"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + camisp_breg: BUCK4 { + regulator-name = "CAM_ISP_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vmem_breg: BUCK5 { + regulator-name = "VMEM_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vccsub_breg: BUCK7 { + regulator-name = "VCC_SUB_2.0V"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + safe1_sreg: ESAFEOUT1 { + regulator-name = "SAFEOUT1"; + }; + + safe2_sreg: ESAFEOUT2 { + regulator-name = "SAFEOUT2"; + regulator-boot-on; + }; + + charger_reg: CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <60000>; + regulator-max-microamp = <2580000>; + regulator-always-on; + }; + + chargercv_reg: CHARGER_CV { + regulator-name = "CHARGER_CV"; + regulator-min-microvolt = <3800000>; + regulator-max-microvolt = <4100000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c_7 { + status = "okay"; + + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <400000>; + + pinctrl-0 = <&i2c7_bus>; + pinctrl-names = "default"; + + ak8975@c { + compatible = "asahi-kasei,ak8975"; + reg = <0x0c>; + + gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>; + }; +}; + +&pinctrl_0 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep0>; + + sleep0: sleep-states { + gpa0-0 { + samsung,pins = "gpa0-0"; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>; + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>; + }; + + gpa0-1 { + samsung,pins = "gpa0-1"; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT0>; + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>; + }; + + gpa0-2 { + samsung,pins = "gpa0-2"; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>; + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>; + }; + + gpa0-3 { + samsung,pins = "gpa0-3"; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>; + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>; + }; + }; +}; + +&pinctrl_1 { + mhl_int: mhl-int { + samsung,pins = "gpf3-5"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + i2c_mhl_bus: i2c-mhl-bus { + samsung,pins = "gpf0-4", "gpf0-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + usb_sel: usb-sel { + samsung,pins = "gpl0-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-val = <0>; + }; + + bt_en: bt-en { + samsung,pins = "gpl0-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + samsung,pin-val = <0>; + }; + + bt_res: bt-res { + samsung,pins = "gpl1-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + samsung,pin-val = <0>; + }; + + otg_gp: otg-gp { + samsung,pins = "gpx3-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-val = <0>; + }; + + mag_mhl_gpio: mag-mhl-gpio { + samsung,pins = "gpd0-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + max8997_irq: max8997-irq { + samsung,pins = "gpx0-7"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + max17042_fuel_irq: max17042-fuel-irq { + samsung,pins = "gpx2-3"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + tsp224_irq: tsp224-irq { + samsung,pins = "gpx0-4"; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + }; +}; + +&sdhci_0 { + status = "okay"; + + bus-width = <8>; + non-removable; + vmmc-supply = <&vemmc_reg>; + + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_bus8>; + pinctrl-names = "default"; +}; + +&sdhci_2 { + status = "okay"; + + bus-width = <4>; + cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vtf_reg>; + + pinctrl-0 = <&sd2_clk>, <&sd2_cmd>, <&sd2_bus4>; + pinctrl-names = "default"; +}; + +&sdhci_3 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + non-removable; + bus-width = <4>; + mmc-pwrseq = <&wlan_pwrseq>; + vmmc-supply = <&vtf_reg>; + + pinctrl-names = "default"; + pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>; + + brcmf: wifi@1 { + compatible = "brcm,bcm4330-fmac"; + reg = <1>; + + interrupt-parent = <&gpx2>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + }; +}; + +&serial_0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&bt_en>, <&bt_res>, <&uart0_data>, <&uart0_fctl>; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + + shutdown-gpios = <&gpl0 4 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpl1 0 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>; + }; +}; + +&serial_1 { + status = "okay"; +}; + +&serial_2 { + status = "okay"; +}; + +&serial_3 { + status = "okay"; +}; + +&tmu { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index 0d1e1a9c2f6e..890525b10d22 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -251,12 +251,7 @@ }; buck1_reg: BUCK1 { - /* - * HACK: The real name is VDD_ARM_1.2V, - * but exynos-cpufreq does not support - * DT-based regulator lookup yet. - */ - regulator-name = "vdd_arm"; + regulator-name = "VDD_ARM_1.2V"; regulator-min-microvolt = <950000>; regulator-max-microvolt = <1350000>; regulator-always-on; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 7c39dd1c4d3a..3d791db6095c 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -121,6 +121,11 @@ }; }; + wlan_pwrseq: sdhci3-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpl1 2 GPIO_ACTIVE_LOW>; + }; + fixed-rate-clocks { xxti { compatible = "samsung,clock-xxti"; @@ -280,11 +285,10 @@ max8997_pmic@66 { compatible = "maxim,max8997-pmic"; - interrupts-extended = <&gpx0 7 0>, <&gpx2 3 0>; reg = <0x66>; - interrupt-parent = <&gpx0>; - interrupts = <7 IRQ_TYPE_NONE>; + interrupts-extended = <&gpx0 7 IRQ_TYPE_LEVEL_LOW>, + <&gpx2 3 IRQ_TYPE_EDGE_FALLING>; max8997,pmic-buck1-uses-gpio-dvs; max8997,pmic-buck2-uses-gpio-dvs; @@ -403,12 +407,7 @@ }; varm_breg: BUCK1 { - /* - * HACK: The real name is VARM_1.2V_C210, - * but exynos-cpufreq does not support - * DT-based regulator lookup yet. - */ - regulator-name = "vdd_arm"; + regulator-name = "VARM_1.2V_C210"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1350000>; regulator-always-on; @@ -471,6 +470,30 @@ status = "okay"; }; +&sdhci_3 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + non-removable; + bus-width = <4>; + mmc-pwrseq = <&wlan_pwrseq>; + vmmc-supply = <&tflash_reg>; + + pinctrl-names = "default"; + pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>; + + brcmf: wifi@1 { + compatible = "brcm,bcm4330-fmac"; + reg = <1>; + + interrupt-parent = <&gpx2>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + }; +}; + &serial_0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 9dda6bdb9253..02fde1a75ebd 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -50,6 +50,11 @@ enable-active-high; }; + wlan_pwrseq: sdhci3-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpe3 1 GPIO_ACTIVE_LOW>; + }; + gpio-keys { compatible = "gpio-keys"; @@ -164,7 +169,8 @@ hdmi_ddc: i2c-ddc { compatible = "i2c-gpio"; - gpios = <&gpe4 2 GPIO_ACTIVE_HIGH &gpe4 3 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpe4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpe4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-gpio,delay-us = <100>; #address-cells = <1>; #size-cells = <0>; @@ -317,7 +323,7 @@ max8952,sync-freq = <0>; max8952,ramp-speed = <0>; - regulator-name = "vdd_arm"; + regulator-name = "VARM_1.2V_C210"; regulator-min-microvolt = <770000>; regulator-max-microvolt = <1400000>; regulator-always-on; @@ -563,6 +569,29 @@ status = "okay"; }; +&sdhci_3 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + non-removable; + bus-width = <4>; + mmc-pwrseq = <&wlan_pwrseq>; + vmmc-supply = <&ldo5_reg>; + + pinctrl-names = "default"; + pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>; + + brcmf: wifi@1 { + compatible = "brcm,bcm4330-fmac"; + reg = <1>; + interrupt-parent = <&gpx2>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + }; +}; + &serial_0 { status = "okay"; /delete-property/dmas; diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi index 44f97546dd0a..53b3ca3effab 100644 --- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi +++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi @@ -53,7 +53,8 @@ i2c_ak8975: i2c-gpio-0 { compatible = "i2c-gpio"; - gpios = <&gpy2 4 GPIO_ACTIVE_HIGH>, <&gpy2 5 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-gpio,delay-us = <2>; #address-cells = <1>; #size-cells = <0>; @@ -68,7 +69,8 @@ i2c_cm36651: i2c-gpio-2 { compatible = "i2c-gpio"; - gpios = <&gpf0 0 GPIO_ACTIVE_LOW>, <&gpf0 1 GPIO_ACTIVE_LOW>; + sda-gpios = <&gpf0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpf0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-gpio,delay-us = <2>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi index 3023bc3b68ce..2c8111c6b065 100644 --- a/arch/arm/boot/dts/exynos4412-midas.dtsi +++ b/arch/arm/boot/dts/exynos4412-midas.dtsi @@ -140,7 +140,8 @@ i2c_max77693: i2c-gpio-1 { compatible = "i2c-gpio"; - gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-gpio,delay-us = <2>; #address-cells = <1>; #size-cells = <0>; @@ -188,7 +189,8 @@ i2c_max77693_fuel: i2c-gpio-3 { compatible = "i2c-gpio"; - gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpf1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpf1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-gpio,delay-us = <2>; #address-cells = <1>; #size-cells = <0>; @@ -228,7 +230,8 @@ i2c-mhl { compatible = "i2c-gpio"; - gpios = <&gpf0 4 GPIO_ACTIVE_HIGH>, <&gpf0 6 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpf0 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpf0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-gpio,delay-us = <100>; #address-cells = <1>; #size-cells = <0>; @@ -820,7 +823,7 @@ }; buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; + regulator-name = "VDD_MIF"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1100000>; regulator-always-on; @@ -831,7 +834,7 @@ }; buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; + regulator-name = "VDD_ARM"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1500000>; regulator-always-on; @@ -842,7 +845,7 @@ }; buck3_reg: BUCK3 { - regulator-name = "vdd_int"; + regulator-name = "VDD_INT"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1150000>; regulator-always-on; @@ -853,7 +856,7 @@ }; buck4_reg: BUCK4 { - regulator-name = "vdd_g3d"; + regulator-name = "VDD_G3D"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1150000>; regulator-boot-on; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 73d6a71da88d..a5c1ce1e396c 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -430,7 +430,7 @@ }; buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; + regulator-name = "VDD_MIF"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1100000>; regulator-always-on; @@ -438,7 +438,7 @@ }; buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; + regulator-name = "VDD_ARM"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1350000>; regulator-always-on; @@ -446,7 +446,7 @@ }; buck3_reg: BUCK3 { - regulator-name = "vdd_int"; + regulator-name = "VDD_INT"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1050000>; regulator-always-on; @@ -454,7 +454,7 @@ }; buck4_reg: BUCK4 { - regulator-name = "vdd_g3d"; + regulator-name = "VDD_G3D"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1100000>; regulator-microvolt-offset = <50000>; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index ecd14b283a6b..dc865be40751 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -363,7 +363,7 @@ }; buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; + regulator-name = "VDD_MIF"; regulator-min-microvolt = <950000>; regulator-max-microvolt = <1100000>; regulator-always-on; @@ -372,7 +372,7 @@ }; buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; + regulator-name = "VDD_ARM"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1350000>; regulator-always-on; @@ -381,7 +381,7 @@ }; buck3_reg: BUCK3 { - regulator-name = "vdd_int"; + regulator-name = "VDD_INT"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1200000>; regulator-always-on; @@ -390,7 +390,7 @@ }; buck4_reg: BUCK4 { - regulator-name = "vdd_g3d"; + regulator-name = "VDD_G3D"; regulator-min-microvolt = <750000>; regulator-max-microvolt = <1500000>; regulator-always-on; @@ -399,7 +399,7 @@ }; buck5_reg: BUCK5 { - regulator-name = "vdd_m12"; + regulator-name = "VDD_M12"; regulator-min-microvolt = <750000>; regulator-max-microvolt = <1500000>; regulator-always-on; @@ -408,7 +408,7 @@ }; buck6_reg: BUCK6 { - regulator-name = "vdd12_5m"; + regulator-name = "VDD12_5M"; regulator-min-microvolt = <750000>; regulator-max-microvolt = <1500000>; regulator-always-on; @@ -417,7 +417,7 @@ }; buck9_reg: BUCK9 { - regulator-name = "vddf28_emmc"; + regulator-name = "VDDF28_EMMC"; regulator-min-microvolt = <750000>; regulator-max-microvolt = <3000000>; regulator-always-on; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 6904091d4837..c4cc7611898c 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -454,7 +454,7 @@ }; buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; + regulator-name = "VDD_MIF"; regulator-min-microvolt = <950000>; regulator-max-microvolt = <1200000>; regulator-always-on; @@ -463,7 +463,7 @@ }; buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; + regulator-name = "VDD_ARM"; regulator-min-microvolt = <912500>; regulator-max-microvolt = <1300000>; regulator-always-on; @@ -472,7 +472,7 @@ }; buck3_reg: BUCK3 { - regulator-name = "vdd_int"; + regulator-name = "VDD_INT"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1200000>; regulator-always-on; @@ -481,7 +481,7 @@ }; buck4_reg: BUCK4 { - regulator-name = "vdd_g3d"; + regulator-name = "VDD_G3D"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1300000>; regulator-always-on; @@ -641,9 +641,8 @@ pinctrl-0 = <&i2c2_gpio_bus>; status = "okay"; compatible = "i2c-gpio"; - gpios = <&gpa0 6 0 /* sda */ - &gpa0 7 0 /* scl */ - >; + sda-gpios = <&gpa0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpa0 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-gpio,delay-us = <2>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index e9a09dd0a49b..dd7f8385d81e 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -673,7 +673,7 @@ }; buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; + regulator-name = "PVDD_ARM_1V0"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1500000>; regulator-always-on; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index d325658901c5..1f4ecbca5225 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -288,11 +288,6 @@ reg = <0x53fa8000 0x4000>; }; - gpr: iomuxc-gpr@53fa8000 { - compatible = "fsl,imx50-iomuxc-gpr", "syscon"; - reg = <0x53fa8000 0xc>; - }; - pwm1: pwm@53fb4000 { #pwm-cells = <2>; compatible = "fsl,imx50-pwm", "fsl,imx27-pwm"; @@ -333,9 +328,10 @@ status = "disabled"; }; - src: src@53fd0000 { + src: reset-controller@53fd0000 { compatible = "fsl,imx50-src", "fsl,imx51-src"; reg = <0x53fd0000 0x4000>; + interrupts = <75>; #reset-cells = <1>; }; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 92fbb90bec57..d3583aad8323 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -439,9 +439,10 @@ status = "disabled"; }; - src: src@73fd0000 { + src: reset-controller@73fd0000 { compatible = "fsl,imx51-src"; reg = <0x73fd0000 0x4000>; + interrupts = <75>; #reset-cells = <1>; }; diff --git a/arch/arm/boot/dts/imx53-cx9020.dts b/arch/arm/boot/dts/imx53-cx9020.dts index 0a475c234054..cfb18849a92b 100644 --- a/arch/arm/boot/dts/imx53-cx9020.dts +++ b/arch/arm/boot/dts/imx53-cx9020.dts @@ -59,23 +59,26 @@ }; dvi-converter { - #address-cells = <1>; - #size-cells = <0>; compatible = "ti,tfp410"; - port@0 { - reg = <0>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; - tfp410_in: endpoint { - remote-endpoint = <&display0_out>; + tfp410_in: endpoint { + remote-endpoint = <&display0_out>; + }; }; - }; - port@1 { - reg = <1>; + port@1 { + reg = <1>; - tfp410_out: endpoint { - remote-endpoint = <&dvi_connector_in>; + tfp410_out: endpoint { + remote-endpoint = <&dvi_connector_in>; + }; }; }; }; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 8536f59f59e6..afa57bf7b0ed 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -588,9 +588,10 @@ status = "disabled"; }; - src: src@53fd0000 { + src: reset-controller@53fd0000 { compatible = "fsl,imx53-src", "fsl,imx51-src"; reg = <0x53fd0000 0x4000>; + interrupts = <75>; #reset-cells = <1>; }; diff --git a/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts new file mode 100644 index 000000000000..223275f028f1 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright 2020 Toradex + */ + +/dts-v1/; + +#include "imx6dl-colibri-eval-v3.dts" +#include "imx6qdl-colibri-v1_1-uhs.dtsi" + +/ { + model = "Toradex Colibri iMX6DL/S V1.1 on Colibri Evaluation Board V3"; + compatible = "toradex,colibri_imx6dl-v1_1-eval-v3", + "toradex,colibri_imx6dl-v1_1", + "toradex,colibri_imx6dl-eval-v3", + "toradex,colibri_imx6dl", + "fsl,imx6dl"; +}; + +/* Colibri MMC */ +&usdhc1 { + status = "okay"; + /* + * Please make sure your carrier board does not pull-up any of + * the MMC/SD signals to 3.3 volt before attempting to activate + * UHS-I support. + * To let signaling voltage be changed to 1.8V, please + * delete no-1-8-v property (example below): + * /delete-property/no-1-8-v; + */ +}; diff --git a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts index bb74fc62d913..a2dd7e549568 100644 --- a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts +++ b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts @@ -22,6 +22,53 @@ clock-frequency = <24000000>; }; + display_bl: display-bl { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>; + default-brightness-level = <8>; + enable-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + lcd_display: disp0 { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_lcdif>; + status = "okay"; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + panel { + compatible = "edt,etm0700g0edh6"; + ddc-i2c-bus = <&i2c2>; + backlight = <&display_bl>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + sound { compatible = "fsl,imx-audio-sgtl5000"; model = "imx-sgtl5000"; @@ -65,6 +112,15 @@ VDDA-supply = <®_3p3v>; VDDIO-supply = <&sw2_reg>; }; + + touchscreen@38 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touchscreen>; + compatible = "edt,edt-ft5406"; + reg = <0x38>; + interrupt-parent = <&gpio4>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */ + }; }; &iomuxc { @@ -77,9 +133,7 @@ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x400120b0 MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x400120b0 MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x400120b0 - MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x120b0 MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x400120b0 - MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x120b0 MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x120b0 MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x400120b0 MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x400120b0 @@ -132,6 +186,52 @@ >; }; + pinctrl_ipu1_lcdif: ipu1-lcdif-grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x38 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x38 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x38 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x38 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x38 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x38 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x38 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x38 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x38 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x38 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x38 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x38 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x38 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x38 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x38 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x38 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x38 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x38 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x38 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x38 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x38 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x38 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x38 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x38 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x38 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x38 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x38 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x38 + MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x120b0 + >; + }; + + pinctrl_pwm1: pwm1-grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_touchscreen: touchscreen-grp { + fsl,pins = < + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b1 + >; + }; + pinctrl_pcie: pcie-grp { fsl,pins = < MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b1 @@ -139,6 +239,10 @@ }; }; +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_display_in>; +}; + &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; @@ -146,6 +250,13 @@ status = "okay"; }; +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + #pwm-cells = <3>; + status = "okay"; +}; + &ssi1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi b/arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi new file mode 100644 index 000000000000..7672fbfc29be --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright 2020 Toradex + */ + +&iomuxc { + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170b1 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100b1 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170b1 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170b1 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170b1 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170b1 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f1 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f1 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f1 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f1 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f1 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f1 + >; + }; +}; + +/* Colibri MMC */ +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_mmc_cd>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_mmc_cd>; + vmmc-supply = <®_module_3v3>; + vqmmc-supply = <&vgen3_reg>; + wakeup-source; + keep-power-in-suspend; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; +}; diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi index 6e3c6b4925a7..240b86d2eb71 100644 --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi @@ -193,7 +193,16 @@ regulator-always-on; }; - /* vgen3: unused */ + /* + * +V3.3_1.8_SD1 coming off VGEN3 and supplying + * the i.MX 6 NVCC_SD1. + */ + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; vgen4_reg: vgen4 { regulator-min-microvolt = <1800000>; diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi index dc646b72b59a..bb3597132c62 100644 --- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi @@ -258,6 +258,14 @@ status = "okay"; }; +&usbotg { + vbus-supply = <®_5p0v>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + &wdog1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdog>; @@ -359,6 +367,12 @@ >; }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x13059 + >; + }; + pinctrl_wdog: wdoggrp { fsl,pins = < MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi index e8e36dfd0a6b..69ca70d3baa8 100644 --- a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi @@ -295,6 +295,15 @@ VDDIO-supply = <®_3p3v>; }; + magn@1c { + compatible = "st,lsm9ds1-magn"; + reg = <0x1c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mag>; + interrupt-parent = <&gpio5>; + interrupts = <9 IRQ_TYPE_EDGE_RISING>; + }; + tca8418: keypad@34 { compatible = "ti,tca8418"; pinctrl-names = "default"; @@ -389,6 +398,16 @@ }; }; }; + + imu@6a { + compatible = "st,lsm9ds1-imu"; + reg = <0x6a>; + st,drdy-int-pin = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_imu>; + interrupt-parent = <&gpio5>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH>; + }; }; &i2c3 { @@ -609,6 +628,12 @@ >; }; + pinctrl_imu: imugrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06 0x1b0b0 + >; + }; + pinctrl_keypad: keypadgrp { fsl,pins = < MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x0001b0b0 /* KEYPAD_IRQ# */ @@ -616,6 +641,12 @@ >; }; + pinctrl_mag: maggrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x1b0b0 + >; + }; + pinctrl_pcie: pciegrp { fsl,pins = < MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31 0x1b0b0 /* PCI_RST# */ diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi index 6d21cc6a9d4b..76d6cf57f1c3 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi @@ -248,6 +248,15 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + magn@1c { + compatible = "st,lsm9ds1-magn"; + reg = <0x1c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mag>; + interrupt-parent = <&gpio5>; + interrupts = <17 IRQ_TYPE_EDGE_RISING>; + }; + ltc3676: pmic@3c { compatible = "lltc,ltc3676"; reg = <0x3c>; @@ -320,6 +329,16 @@ }; }; }; + + imu@6a { + compatible = "st,lsm9ds1-imu"; + reg = <0x6a>; + st,drdy-int-pin = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_imu>; + interrupt-parent = <&gpio4>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH>; + }; }; &i2c3 { @@ -501,6 +520,18 @@ >; }; + pinctrl_imu: imugrp { + fsl,pins = < + MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 + >; + }; + + pinctrl_mag: maggrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b0 + >; + }; + pinctrl_pcie: pciegrp { fsl,pins = < MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* PCIE RST */ diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi index 30fe47ff64a4..0857de505192 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi @@ -81,20 +81,6 @@ enable-active-high; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - reg_bt: regulator-bt { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reg_bt>; - compatible = "regulator-fixed"; - regulator-name = "bt"; - gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; - startup-delay-us = <100>; - enable-active-high; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; }; }; @@ -231,9 +217,14 @@ /* Sterling-LWB Bluetooth */ &uart4 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart4>; + pinctrl-0 = <&pinctrl_uart4>,<&pinctrl_bten>; uart-has-rtscts; status = "okay"; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + shutdown-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + }; }; /* GPS */ @@ -259,7 +250,7 @@ &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; - vmmc-supply = <®_3p3v>; + vmmc-supply = <®_wl>; non-removable; bus-width = <4>; status = "okay"; @@ -288,6 +279,12 @@ >; }; + pinctrl_bten: btengrp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b1 + >; + }; + pinctrl_ecspi3: escpi3grp { fsl,pins = < MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 @@ -393,12 +390,6 @@ >; }; - pinctrl_reg_bt: regbtgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b1 - >; - }; - pinctrl_reg_wl: regwlgrp { fsl,pins = < MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi index 6d7f6b9035bc..b06577808ff4 100644 --- a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi @@ -53,10 +53,21 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_microsom_enet_ar8035>; + phy-handle = <&phy>; phy-mode = "rgmii-id"; phy-reset-duration = <2>; phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy: ethernet-phy@0 { + reg = <0>; + qca,clk-out-frequency = <125000000>; + }; + }; }; &iomuxc { diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 48f50161ea21..32114cf6acee 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -74,7 +74,8 @@ interrupt-parent = <&gpc>; interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; fsl,tempmon = <&anatop>; - fsl,tempmon-data = <&ocotp>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>; #thermal-sensor-cells = <0>; }; @@ -857,7 +858,7 @@ interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>; }; - src: src@20d8000 { + src: reset-controller@20d8000 { compatible = "fsl,imx6q-src", "fsl,imx51-src"; reg = <0x020d8000 0x4000>; interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>, @@ -1171,6 +1172,14 @@ cpu_speed_grade: speed-grade@10 { reg = <0x10 4>; }; + + tempmon_calib: calib@38 { + reg = <0x38 4>; + }; + + tempmon_temp_grade: temp-grade@20 { + reg = <0x20 4>; + }; }; tzasc@21d0000 { /* TZASC1 */ diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 8230b45057a1..911d8cf77f2c 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -98,7 +98,8 @@ interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gpc>; fsl,tempmon = <&anatop>; - fsl,tempmon-data = <&ocotp>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>; }; @@ -677,7 +678,7 @@ interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>; }; - src: src@20d8000 { + src: reset-controller@20d8000 { compatible = "fsl,imx6sl-src", "fsl,imx51-src"; reg = <0x020d8000 0x4000>; interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>, @@ -961,6 +962,14 @@ cpu_speed_grade: speed-grade@10 { reg = <0x10 4>; }; + + tempmon_calib: calib@38 { + reg = <0x38 4>; + }; + + tempmon_temp_grade: temp-grade@20 { + reg = <0x20 4>; + }; }; audmux: audmux@21d8000 { diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 09f21aaee936..94e3df47d1ad 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -754,7 +754,7 @@ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; }; - src: src@20d8000 { + src: reset-controller@20d8000 { compatible = "fsl,imx6sx-src", "fsl,imx51-src"; reg = <0x020d8000 0x4000>; interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 345ae9b0db37..5379a03391bd 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -677,7 +677,7 @@ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; }; - src: src@20d8000 { + src: reset-controller@20d8000 { compatible = "fsl,imx6ul-src", "fsl,imx51-src"; reg = <0x020d8000 0x4000>; interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm/boot/dts/imx7-tqma7.dtsi b/arch/arm/boot/dts/imx7-tqma7.dtsi index 9aaed85138cb..8773344b54aa 100644 --- a/arch/arm/boot/dts/imx7-tqma7.dtsi +++ b/arch/arm/boot/dts/imx7-tqma7.dtsi @@ -16,7 +16,7 @@ }; &cpu0 { - arm-supply = <&sw1a_reg>; + cpu-supply = <&sw1a_reg>; }; &i2c1 { diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts index 89267cd59037..713483c39c9d 100644 --- a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts +++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts @@ -37,6 +37,10 @@ cpu-supply = <&sw1a_reg>; }; +&cpu1 { + cpu-supply = <&sw1a_reg>; +}; + &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1>; diff --git a/arch/arm/boot/dts/imx7d-colibri.dtsi b/arch/arm/boot/dts/imx7d-colibri.dtsi index c59d72e50920..219a0404a058 100644 --- a/arch/arm/boot/dts/imx7d-colibri.dtsi +++ b/arch/arm/boot/dts/imx7d-colibri.dtsi @@ -13,6 +13,10 @@ }; }; +&cpu1 { + cpu-supply = <®_DCDC2>; +}; + &gpmi { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts index 6b4acea1ef79..e0751e6ba3c0 100644 --- a/arch/arm/boot/dts/imx7d-nitrogen7.dts +++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts @@ -121,6 +121,10 @@ cpu-supply = <&sw1a_reg>; }; +&cpu1 { + cpu-supply = <&sw1a_reg>; +}; + &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1>; diff --git a/arch/arm/boot/dts/imx7d-pinfunc.h b/arch/arm/boot/dts/imx7d-pinfunc.h index 08ca1608fdb1..69f2c1ec8254 100644 --- a/arch/arm/boot/dts/imx7d-pinfunc.h +++ b/arch/arm/boot/dts/imx7d-pinfunc.h @@ -592,7 +592,7 @@ #define MX7D_PAD_UART2_RX_DATA__ECSPI1_SS3 0x0130 0x03A0 0x0000 0x3 0x0 #define MX7D_PAD_UART2_RX_DATA__ENET2_1588_EVENT1_IN 0x0130 0x03A0 0x0000 0x4 0x0 #define MX7D_PAD_UART2_RX_DATA__GPIO4_IO2 0x0130 0x03A0 0x0000 0x5 0x0 -#define MX7D_PAD_UART2_RX_DATA__ENET2_MDIO 0x0130 0x03A0 0x0000 0x6 0x0 +#define MX7D_PAD_UART2_RX_DATA__ENET2_MDIO 0x0130 0x03A0 0x0574 0x6 0x1 #define MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX 0x0134 0x03A4 0x0000 0x0 0x0 #define MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX 0x0134 0x03A4 0x06FC 0x0 0x3 #define MX7D_PAD_UART2_TX_DATA__I2C2_SDA 0x0134 0x03A4 0x05E0 0x1 0x0 diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 869efbc4af42..17cca8a9f77b 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -162,6 +162,10 @@ cpu-supply = <&sw1a_reg>; }; +&cpu1 { + cpu-supply = <&sw1a_reg>; +}; + &ecspi3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; diff --git a/arch/arm/boot/dts/imx7d-tqma7.dtsi b/arch/arm/boot/dts/imx7d-tqma7.dtsi index 8ad3048dac0d..598aed1ffd99 100644 --- a/arch/arm/boot/dts/imx7d-tqma7.dtsi +++ b/arch/arm/boot/dts/imx7d-tqma7.dtsi @@ -9,3 +9,7 @@ #include "imx7d.dtsi" #include "imx7-tqma7.dtsi" + +&cpu1 { + cpu-supply = <&sw1a_reg>; +}; diff --git a/arch/arm/boot/dts/imx7d-zii-rmu2.dts b/arch/arm/boot/dts/imx7d-zii-rmu2.dts index 2b8d6cc45a53..e5e20b07f184 100644 --- a/arch/arm/boot/dts/imx7d-zii-rmu2.dts +++ b/arch/arm/boot/dts/imx7d-zii-rmu2.dts @@ -33,7 +33,7 @@ }; &cpu0 { - arm-supply = <&sw1a_reg>; + cpu-supply = <&sw1a_reg>; }; &ecspi1 { diff --git a/arch/arm/boot/dts/imx7d-zii-rpu2.dts b/arch/arm/boot/dts/imx7d-zii-rpu2.dts index 39812c92bf0d..cbf0dbb4c198 100644 --- a/arch/arm/boot/dts/imx7d-zii-rpu2.dts +++ b/arch/arm/boot/dts/imx7d-zii-rpu2.dts @@ -182,7 +182,7 @@ }; &cpu0 { - arm-supply = <&sw1a_reg>; + cpu-supply = <&sw1a_reg>; }; &clks { diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 5bf0b39fa99b..f6bb35d3ce51 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -624,7 +624,7 @@ clock-names = "ckil", "osc"; }; - src: src@30390000 { + src: reset-controller@30390000 { compatible = "fsl,imx7d-src", "syscon"; reg = <0x30390000 0x10000>; interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/integratorap-im-pd1.dts b/arch/arm/boot/dts/integratorap-im-pd1.dts new file mode 100644 index 000000000000..1412a1a968fc --- /dev/null +++ b/arch/arm/boot/dts/integratorap-im-pd1.dts @@ -0,0 +1,270 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree for the ARM Integrator/AP platform + * with the IM-PD1 example logical module mounted. + */ + +#include "integratorap.dts" + +/ { + model = "ARM Integrator/AP with IM-PD1"; + compatible = "arm,integrator-ap"; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + impd1_ram: vram@c2000000 { + /* 1 MB of designated video RAM on the IM-PD1 */ + compatible = "shared-dma-pool"; + reg = <0xc2000000 0x00100000>; + no-map; + }; + }; +}; + +&lm0 { + syscon@0 { + compatible = "arm,im-pd1-syscon", "syscon"; + reg = <0x00000000 0x1000>; + + vco1: clock@00 { + compatible = "arm,impd1-vco1"; + #clock-cells = <0>; + lock-offset = <0x08>; + vco-offset = <0x00>; + clocks = <&sysclk>; + clock-output-names = "IM-PD1-VCO1"; + }; + + vco2: clock@04 { + compatible = "arm,impd1-vco2"; + #clock-cells = <0>; + lock-offset = <0x08>; + vco-offset = <0x04>; + clocks = <&sysclk>; + clock-output-names = "IM-PD1-VCO2"; + }; + }; + + /* Also used for the Smart Card Interface SCI */ + impd1_uartclk: clock@1_4 { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <4>; + clock-mult = <1>; + clocks = <&vco2>; + clock-output-names = "VCO2_DIV4"; + }; + + /* For the SSP the clock is divided by 64 */ + impd1_sspclk: clock@1_64 { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <64>; + clock-mult = <1>; + clocks = <&vco2>; + clock-output-names = "VCO2_DIV64"; + }; + + /* Fixed regulator for the MMC */ + impd1_3v3: regulator { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + /* Push buttons on the IM-PD1 */ + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@0 { + debounce-interval = <50>; + linux,code = <KEY_UP>; + label = "UP"; + gpios = <&impd1_gpio1 0 GPIO_ACTIVE_HIGH>; + }; + button@1 { + debounce-interval = <50>; + linux,code = <KEY_DOWN>; + label = "DOWN"; + gpios = <&impd1_gpio1 1 GPIO_ACTIVE_HIGH>; + }; + button@2 { + debounce-interval = <50>; + linux,code = <KEY_LEFT>; + label = "LEFT"; + gpios = <&impd1_gpio1 2 GPIO_ACTIVE_HIGH>; + }; + button@3 { + debounce-interval = <50>; + linux,code = <KEY_RIGHT>; + label = "UP"; + gpios = <&impd1_gpio1 3 GPIO_ACTIVE_HIGH>; + }; + button@4 { + debounce-interval = <50>; + linux,code = <KEY_ESC>; + label = "ESC"; + gpios = <&impd1_gpio1 4 GPIO_ACTIVE_HIGH>; + }; + button@5 { + debounce-interval = <50>; + linux,code = <KEY_ENTER>; + label = "ENTER"; + gpios = <&impd1_gpio1 5 GPIO_ACTIVE_HIGH>; + }; + }; + + + bridge { + compatible = "ti,ths8134b", "ti,ths8134"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + vga_bridge_in: endpoint { + remote-endpoint = <&clcd_pads_vga_dac>; + }; + }; + + port@1 { + reg = <1>; + + vga_bridge_out: endpoint { + remote-endpoint = <&vga_con_in>; + }; + }; + }; + }; + + vga { + compatible = "vga-connector"; + + port { + vga_con_in: endpoint { + remote-endpoint = <&vga_bridge_out>; + }; + }; + }; + + uart@100000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x00100000 0x1000>; + interrupts-extended = <&impd1_vic 1>; + clocks = <&impd1_uartclk>, <&sysclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + uart@200000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x00200000 0x1000>; + interrupts-extended = <&impd1_vic 2>; + clocks = <&impd1_uartclk>, <&sysclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + ssp@300000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x00300000 0x1000>; + interrupts-extended = <&impd1_vic 3>; + clocks = <&impd1_sspclk>, <&sysclk>; + clock-names = "spiclk", "apb_pclk"; + }; + + impd1_gpio0: gpio@400000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x00400000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts-extended = <&impd1_vic 4>; + clocks = <&sysclk>; + clock-names = "apb_pclk"; + }; + + impd1_gpio1: gpio@500000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x00500000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts-extended = <&impd1_vic 5>; + clocks = <&sysclk>; + clock-names = "apb_pclk"; + }; + + rtc@600000 { + compatible = "arm,pl030", "arm,primecell"; + reg = <0x00600000 0x1000>; + interrupts-extended = <&impd1_vic 6>; + clocks = <&sysclk>; + clock-names = "apb_pclk"; + }; + + mmc@700000 { + compatible = "arm,pl181", "arm,primecell"; + reg = <0x00700000 0x1000>; + interrupts-extended = <&impd1_vic 7>, + <&impd1_vic 8>; + clocks = <&sysclk>, <&sysclk>; + clock-names = "mclk", "apb_pclk"; + bus-width = <1>; + max-frequency = <515633>; + vmmc-supply = <&impd1_3v3>; + wp-gpios = <&impd1_gpio0 3 GPIO_ACTIVE_HIGH>; + cd-gpios = <&impd1_gpio0 4 GPIO_ACTIVE_LOW>; + }; + + aaci@800000 { + compatible = "arm,pl041", "arm,primecell"; + reg = <0x00800000 0x1000>; + interrupts-extended = <&impd1_vic 9>; + clocks = <&sysclk>; + clock-names = "apb_pclk"; + }; + + display@1000000 { + compatible = "arm,pl110", "arm,primecell"; + reg = <0x01000000 0x1000>; + interrupts-extended = <&impd1_vic 11>; + clocks = <&vco1>, <&sysclk>; + clock-names = "clcdclk", "apb_pclk"; + /* 640x480 16bpp @ 25.175MHz is 36827428 bytes/s */ + max-memory-bandwidth = <40000000>; + memory-region = <&impd1_ram>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + + clcd_pads_vga_dac: endpoint@0 { + reg = <0>; + remote-endpoint = <&vga_bridge_in>; + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + }; + }; + }; + + impd1_vic: interrupt-controller@3000000 { + compatible = "arm,pl192-vic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x03000000 0x1000>; + /* Valid interrupts, 0-9 and 11 */ + valid-mask = <0x00000bff>; + /* LM site 0 has IRQ 9 on the PIC */ + interrupts-extended = <&pic 9>; + }; +}; diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts index 198d66181c50..67d1f9b24a52 100644 --- a/arch/arm/boot/dts/integratorap.dts +++ b/arch/arm/boot/dts/integratorap.dts @@ -4,7 +4,9 @@ */ /dts-v1/; -/include/ "integrator.dtsi" +#include "integrator.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { model = "ARM Integrator/AP"; @@ -107,9 +109,6 @@ syscon { compatible = "arm,integrator-ap-syscon", "syscon"; reg = <0x11000000 0x100>; - interrupt-parent = <&pic>; - /* These are the logical module IRQs */ - interrupts = <9>, <10>, <11>, <12>; /* * SYSCLK clocks PCIv3 bridge, system controller and the @@ -239,4 +238,50 @@ clock-names = "KMIREFCLK", "apb_pclk"; }; }; + + /* + * Logic module bus, we support up to 4 logical modules + * They appear at 0xc0000000, 0xd0000000, 0xe0000000 and 0xf0000000 + * and use interrupts 9, 10, 11 and 12 respectively. + */ + bus@c0000000 { + compatible = "arm,integrator-ap-lm"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xc0000000 0xc0000000 0x40000000>; + dma-ranges; + + lm0: bus@c0000000 { + compatible = "simple-bus"; + ranges = <0x00000000 0xc0000000 0x10000000>; + dma-ranges = <0x00000000 0x80000000 0x10000000>; + reg = <0xc0000000 0x10000000>; + #address-cells = <1>; + #size-cells = <1>; + }; + lm1: bus@d0000000 { + compatible = "simple-bus"; + ranges = <0x00000000 0xd0000000 0x10000000>; + dma-ranges = <0x00000000 0x80000000 0x10000000>; + reg = <0xd0000000 0x10000000>; + #address-cells = <1>; + #size-cells = <1>; + }; + lm2: bus@e0000000 { + compatible = "simple-bus"; + ranges = <0x00000000 0xe0000000 0x10000000>; + dma-ranges = <0x00000000 0x80000000 0x10000000>; + reg = <0xe0000000 0x10000000>; + #address-cells = <1>; + #size-cells = <1>; + }; + lm3: bus@f0000000 { + compatible = "simple-bus"; + ranges = <0x00000000 0xf0000000 0x10000000>; + dma-ranges = <0x00000000 0x80000000 0x10000000>; + reg = <0xf0000000 0x10000000>; + #address-cells = <1>; + #size-cells = <1>; + }; + }; }; diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi index 085e7326ea8e..2d94faf31fab 100644 --- a/arch/arm/boot/dts/keystone-k2e.dtsi +++ b/arch/arm/boot/dts/keystone-k2e.dtsi @@ -86,14 +86,14 @@ }; }; - msm_ram: msmram@c000000 { + msm_ram: sram@c000000 { compatible = "mmio-sram"; reg = <0x0c000000 0x200000>; ranges = <0x0 0x0c000000 0x200000>; #address-cells = <1>; #size-cells = <1>; - sram-bm@1f0000 { + bm-sram@1f0000 { reg = <0x001f0000 0x8000>; }; }; diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts index b7f10bf94576..db640bab8c1d 100644 --- a/arch/arm/boot/dts/keystone-k2g-evm.dts +++ b/arch/arm/boot/dts/keystone-k2g-evm.dts @@ -45,6 +45,19 @@ regulator-max-microvolt = <1800000>; regulator-always-on; }; + + hdmi: connector { + compatible = "hdmi-connector"; + label = "hdmi"; + + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&sii9022_out>; + }; + }; + }; }; &k2g_pinctrl { @@ -89,6 +102,13 @@ >; }; + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x1384) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* i2c1_scl.i2c1_scl */ + K2G_CORE_IOPAD(0x1388) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* i2c1_sda.i2c1_sda */ + >; + }; + ecap0_pins: ecap0_pins { pinctrl-single,pins = < K2G_CORE_IOPAD(0x1374) (BUFFER_CLASS_B | MUX_MODE4) /* pr1_mdio_data.ecap0_in_apwm0_out */ @@ -160,6 +180,40 @@ K2G_CORE_IOPAD(0x1188) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* MDIO_DATA.MDIO_DATA */ >; }; + + vout_pins: pinmux_vout_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x1078) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata23.dssdata23 */ + K2G_CORE_IOPAD(0x107c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata22.dssdata22 */ + K2G_CORE_IOPAD(0x1080) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata21.dssdata21 */ + K2G_CORE_IOPAD(0x1084) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata20.dssdata20 */ + K2G_CORE_IOPAD(0x1088) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata19.dssdata19 */ + K2G_CORE_IOPAD(0x108c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata18.dssdata18 */ + K2G_CORE_IOPAD(0x1090) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata17.dssdata17 */ + K2G_CORE_IOPAD(0x1094) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata16.dssdata16 */ + K2G_CORE_IOPAD(0x1098) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata15.dssdata15 */ + K2G_CORE_IOPAD(0x109c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata14.dssdata14 */ + K2G_CORE_IOPAD(0x10a0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata13.dssdata13 */ + K2G_CORE_IOPAD(0x10a4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata12.dssdata12 */ + K2G_CORE_IOPAD(0x10a8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata11.dssdata11 */ + K2G_CORE_IOPAD(0x10ac) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata10.dssdata10 */ + K2G_CORE_IOPAD(0x10b0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata9.dssdata9 */ + K2G_CORE_IOPAD(0x10b4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata8.dssdata8 */ + K2G_CORE_IOPAD(0x10b8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata7.dssdata7 */ + K2G_CORE_IOPAD(0x10bc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata6.dssdata6 */ + K2G_CORE_IOPAD(0x10c0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata5.dssdata5 */ + K2G_CORE_IOPAD(0x10c4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata4.dssdata4 */ + K2G_CORE_IOPAD(0x10c8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata3.dssdata3 */ + K2G_CORE_IOPAD(0x10cc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata2.dssdata2 */ + K2G_CORE_IOPAD(0x10d0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata1.dssdata1 */ + K2G_CORE_IOPAD(0x10d4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata0.dssdata0 */ + K2G_CORE_IOPAD(0x10d8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssvsync.dssvsync */ + K2G_CORE_IOPAD(0x10dc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dsshsync.dsshsync */ + K2G_CORE_IOPAD(0x10e0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dsspclk.dsspclk */ + K2G_CORE_IOPAD(0x10e4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssde.dssde */ + K2G_CORE_IOPAD(0x10e8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssfid.dssfid */ + >; + }; }; &uart0 { @@ -357,3 +411,50 @@ pinctrl-0 = <&emac_pins>; status = "okay"; }; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "okay"; + clock-frequency = <400000>; + + sii9022: sii9022@3b { + #sound-dai-cells = <0>; + compatible = "sil,sii9022"; + reg = <0x3b>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sii9022_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + + port@1 { + reg = <1>; + + sii9022_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; +}; + +&dss { + pinctrl-names = "default"; + pinctrl-0 = <&vout_pins>; + status = "ok"; + + port { + dpi_out: endpoint { + remote-endpoint = <&sii9022_in>; + data-lines = <24>; + }; + }; +}; diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi index 1c833105d6c5..05a75019275e 100644 --- a/arch/arm/boot/dts/keystone-k2g.dtsi +++ b/arch/arm/boot/dts/keystone-k2g.dtsi @@ -95,14 +95,14 @@ ranges = <0x0 0x0 0x0 0xc0000000>; dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>; - msm_ram: msmram@c000000 { + msm_ram: sram@c000000 { compatible = "mmio-sram"; reg = <0x0c000000 0x100000>; ranges = <0x0 0x0c000000 0x100000>; #address-cells = <1>; #size-cells = <1>; - sram-bm@f7000 { + bm-sram@f7000 { reg = <0x000f7000 0x8000>; }; }; @@ -324,6 +324,28 @@ clock-names = "gpio"; }; + dss: dss@02540000 { + compatible = "ti,k2g-dss"; + reg = <0x02540000 0x400>, + <0x02550000 0x1000>, + <0x02557000 0x1000>, + <0x0255a800 0x100>, + <0x0255ac00 0x100>; + reg-names = "cfg", "common", "vid1", "ovr1", "vp1"; + clocks = <&k2g_clks 0x2 0>, + <&k2g_clks 0x2 1>; + clock-names = "fck", "vp1"; + interrupts = <GIC_SPI 247 IRQ_TYPE_EDGE_RISING>; + + power-domains = <&k2g_pds 0x2>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + max-memory-bandwidth = <230000000>; + }; + edma0: edma@2700000 { compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc"; reg = <0x02700000 0x8000>; diff --git a/arch/arm/boot/dts/keystone-k2hk.dtsi b/arch/arm/boot/dts/keystone-k2hk.dtsi index ca0f198ba627..8a9447703310 100644 --- a/arch/arm/boot/dts/keystone-k2hk.dtsi +++ b/arch/arm/boot/dts/keystone-k2hk.dtsi @@ -57,14 +57,14 @@ &soc0 { /include/ "keystone-k2hk-clocks.dtsi" - msm_ram: msmram@c000000 { + msm_ram: sram@c000000 { compatible = "mmio-sram"; reg = <0x0c000000 0x600000>; ranges = <0x0 0x0c000000 0x600000>; #address-cells = <1>; #size-cells = <1>; - sram-bm@5f0000 { + bm-sram@5f0000 { reg = <0x5f0000 0x8000>; }; }; diff --git a/arch/arm/boot/dts/keystone-k2l.dtsi b/arch/arm/boot/dts/keystone-k2l.dtsi index 374c80124c4e..dff5fea72b2f 100644 --- a/arch/arm/boot/dts/keystone-k2l.dtsi +++ b/arch/arm/boot/dts/keystone-k2l.dtsi @@ -255,14 +255,14 @@ }; }; - msm_ram: msmram@c000000 { + msm_ram: sram@c000000 { compatible = "mmio-sram"; reg = <0x0c000000 0x200000>; ranges = <0x0 0x0c000000 0x200000>; #address-cells = <1>; #size-cells = <1>; - sram-bm@1f8000 { + bm-sram@1f8000 { reg = <0x001f8000 0x8000>; }; }; diff --git a/arch/arm/boot/dts/kirkwood-l-50.dts b/arch/arm/boot/dts/kirkwood-l-50.dts new file mode 100644 index 000000000000..0d81c43a6a73 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-l-50.dts @@ -0,0 +1,438 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Check Point L-50 Board Description + * Copyright 2020 Pawel Dembicki <paweldembicki@gmail.com> + */ + +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" + +/ { + model = "Check Point L-50"; + compatible = "checkpoint,l-50", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; + }; + + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pinctrl-0 = <&pmx_led38 &pmx_sysrst &pmx_button29>; + pinctrl-names = "default"; + + pmx_sysrst: pmx-sysrst { + marvell,pins = "mpp6"; + marvell,function = "sysrst"; + }; + + pmx_button29: pmx_button29 { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + + pmx_led38: pmx_led38 { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + + pmx_sdio_cd: pmx-sdio-cd { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + }; + + serial@12000 { + status = "okay"; + }; + + mvsdio@90000 { + status = "okay"; + cd-gpios = <&gpio1 14 9>; + }; + + i2c@11000 { + status = "okay"; + clock-frequency = <400000>; + + gpio2: gpio-expander@20{ + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "semtech,sx1505q"; + reg = <0x20>; + + gpio-controller; + }; + + /* Three GPIOs from 0x21 exp. are undescribed in dts: + * 1: DSL module reset (active low) + * 5: mPCIE reset (active low) + * 6: Express card reset (active low) + */ + gpio3: gpio-expander@21{ + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "semtech,sx1505q"; + reg = <0x21>; + + gpio-controller; + }; + + rtc@30 { + compatible = "s35390a"; + reg = <0x30>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + status_green { + label = "l-50:green:status"; + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + }; + + status_red { + label = "l-50:red:status"; + gpios = <&gpio3 2 GPIO_ACTIVE_LOW>; + }; + + wifi { + label = "l-50:green:wifi"; + gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + internet_green { + label = "l-50:green:internet"; + gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + }; + + internet_red { + label = "l-50:red:internet"; + gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + }; + + usb1_green { + label = "l-50:green:usb1"; + gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "usbport"; + trigger-sources = <&hub_port3>; + }; + + usb1_red { + label = "l-50:red:usb1"; + gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + }; + + usb2_green { + label = "l-50:green:usb2"; + gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; + linux,default-trigger = "usbport"; + trigger-sources = <&hub_port1>; + }; + + usb2_red { + label = "l-50:red:usb2"; + gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; + }; + }; + + usb2_pwr { + compatible = "regulator-fixed"; + regulator-name = "usb2_pwr"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 3 GPIO_ACTIVE_LOW>; + regulator-always-on; + }; + + usb1_pwr { + compatible = "regulator-fixed"; + regulator-name = "usb1_pwr"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 4 GPIO_ACTIVE_LOW>; + regulator-always-on; + }; + + mpcie_pwr { + compatible = "regulator-fixed"; + regulator-name = "mpcie_pwr"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + express_card_pwr { + compatible = "regulator-fixed"; + regulator-name = "express_card_pwr"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + keys { + compatible = "gpio-keys"; + + factory_defaults { + label = "factory_defaults"; + gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy8: ethernet-phy@8 { + reg = <0x08>; + }; + + switch0: switch@10 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10>; + dsa,member = <0 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan5"; + }; + + port@1 { + reg = <1>; + label = "lan1"; + }; + + port@2 { + reg = <2>; + label = "lan6"; + }; + + port@3 { + reg = <3>; + label = "lan2"; + }; + + port@4 { + reg = <4>; + label = "lan7"; + }; + + switch0port5: port@5 { + reg = <5>; + phy-mode = "rgmii-txid"; + link = <&switch1port5>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@6 { + reg = <6>; + label = "cpu"; + phy-mode = "rgmii-id"; + ethernet = <ð1port>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + + switch@11 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x11>; + dsa,member = <0 1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan3"; + }; + + port@1 { + reg = <1>; + label = "lan8"; + }; + + port@2 { + reg = <2>; + label = "lan4"; + }; + + port@3 { + reg = <3>; + label = "dmz"; + }; + + switch1port5: port@5 { + reg = <5>; + phy-mode = "rgmii-txid"; + link = <&switch0port5>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@6 { + reg = <6>; + label = "dsl"; + fixed-link { + speed = <100>; + full-duplex; + }; + }; + }; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy8>; + }; +}; + +ð1 { + status = "okay"; + ethernet1-port@0 { + speed = <1000>; + duplex = <1>; + }; +}; + +&nand { + status = "okay"; + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x000c0000>; + }; + + partition@a0000 { + label = "bootldr-env"; + reg = <0x000c0000 0x00040000>; + }; + + partition@100000 { + label = "kernel-1"; + reg = <0x00100000 0x00800000>; + }; + + partition@900000 { + label = "rootfs-1"; + reg = <0x00900000 0x07100000>; + }; + + partition@7a00000 { + label = "kernel-2"; + reg = <0x07a00000 0x00800000>; + }; + + partition@8200000 { + label = "rootfs-2"; + reg = <0x08200000 0x07100000>; + }; + + partition@f300000 { + label = "default_sw"; + reg = <0x0f300000 0x07900000>; + }; + + partition@16c00000 { + label = "logs"; + reg = <0x16c00000 0x01800000>; + }; + + partition@18400000 { + label = "preset_cfg"; + reg = <0x18400000 0x00100000>; + }; + + partition@18500000 { + label = "adsl"; + reg = <0x18500000 0x00100000>; + }; + + partition@18600000 { + label = "storage"; + reg = <0x18600000 0x07a00000>; + }; +}; + +&rtc { + status = "disabled"; +}; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&sata_phy0 { + status = "disabled"; +}; + +&sata_phy1 { + status = "disabled"; +}; + +&usb0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + #trigger-source-cells = <0>; + + hub_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; + + hub_port3: port@3 { + reg = <3>; + #trigger-source-cells = <0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts index 8cc8550242ef..b13aee570804 100644 --- a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts +++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts @@ -113,6 +113,20 @@ }; }; + auxdisplay { + compatible = "hit,hd44780"; + data-gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>, + <&gpio1 1 GPIO_ACTIVE_HIGH>, + <&gpio1 3 GPIO_ACTIVE_HIGH>, + <&gpio1 17 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + rs-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + rw-gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; + backlight-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + display-height-chars = <2>; + display-width-chars = <16>; + }; + gpio-leds { compatible = "gpio-leds"; pinctrl-0 = < &pmx_led_blue_power &pmx_led_blue_backup diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 2161e23bd98e..6c8d94beae78 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -228,7 +228,7 @@ reg = <0x20128 0x4>; }; - intc: main-interrupt-ctrl@20200 { + intc: interrupt-controller@20200 { compatible = "marvell,orion-intc"; interrupt-controller; #interrupt-cells = <1>; diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts index 9b1fe99d55b1..5edf001f6138 100644 --- a/arch/arm/boot/dts/ls1021a-twr.dts +++ b/arch/arm/boot/dts/ls1021a-twr.dts @@ -242,6 +242,20 @@ status = "okay"; }; +&qspi { + status = "okay"; + + n25q128a130: flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + reg = <0>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + }; +}; + &sai1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index 5d198309058a..ae89deaa8c9c 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -229,6 +229,9 @@ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; phys = <&usb0_phy>; phy-names = "usb2-phy"; + g-rx-fifo-size = <512>; + g-np-tx-fifo-size = <500>; + g-tx-fifo-size = <256 192 128 128 128>; dr_mode = "host"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts index a2a47804fc4a..cb21ac9f517c 100644 --- a/arch/arm/boot/dts/meson8b-odroidc1.dts +++ b/arch/arm/boot/dts/meson8b-odroidc1.dts @@ -202,9 +202,8 @@ pinctrl-0 = <ð_rgmii_pins>; pinctrl-names = "default"; - phy-mode = "rgmii"; phy-handle = <ð_phy>; - amlogic,tx-delay-ns = <4>; + phy-mode = "rgmii-id"; nvmem-cells = <ðernet_mac_address>; nvmem-cell-names = "mac-address"; diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index e34b039b9357..ba36168b9c1b 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -425,8 +425,9 @@ clocks = <&clkc CLKID_ETH>, <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL2>; - clock-names = "stmmaceth", "clkin0", "clkin1"; + <&clkc CLKID_MPLL2>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment"; rx-fifo-depth = <4096>; tx-fifo-depth = <2048>; diff --git a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts index d54477b1001c..cc498191ddd1 100644 --- a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts +++ b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts @@ -69,9 +69,7 @@ pinctrl-names = "default"; phy-handle = <ð_phy0>; - phy-mode = "rgmii"; - - amlogic,tx-delay-ns = <4>; + phy-mode = "rgmii-id"; mdio { compatible = "snps,dwmac-mdio"; diff --git a/arch/arm/boot/dts/meson8m2.dtsi b/arch/arm/boot/dts/meson8m2.dtsi index 5bde7f502007..2397ba06d608 100644 --- a/arch/arm/boot/dts/meson8m2.dtsi +++ b/arch/arm/boot/dts/meson8m2.dtsi @@ -30,8 +30,9 @@ 0xc1108140 0x8>; clocks = <&clkc CLKID_ETH>, <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL2>; - clock-names = "stmmaceth", "clkin0", "clkin1"; + <&clkc CLKID_MPLL2>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment"; resets = <&reset RESET_ETHERNET>; reset-names = "stmmaceth"; }; @@ -64,6 +65,14 @@ compatible = "amlogic,meson8m2-saradc", "amlogic,meson-saradc"; }; +&usb0_phy { + compatible = "amlogic,meson8m2-usb2-phy", "amlogic,meson-mx-usb2-phy"; +}; + +&usb1_phy { + compatible = "amlogic,meson8m2-usb2-phy", "amlogic,meson-mx-usb2-phy"; +}; + &wdt { compatible = "amlogic,meson8m2-wdt", "amlogic,meson8b-wdt"; }; diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi index da10567b5aca..4306f3a6742b 100644 --- a/arch/arm/boot/dts/mmp2.dtsi +++ b/arch/arm/boot/dts/mmp2.dtsi @@ -364,7 +364,7 @@ rtc: rtc@d4010000 { compatible = "mrvl,mmp-rtc"; reg = <0xd4010000 0x1000>; - interrupts = <1 0>; + interrupts = <1>, <0>; interrupt-names = "rtc 1Hz", "rtc alarm"; interrupt-parent = <&intcmux5>; clocks = <&soc_clocks MMP2_CLK_RTC>; diff --git a/arch/arm/boot/dts/mmp3.dtsi b/arch/arm/boot/dts/mmp3.dtsi index 826f0a577859..57231d49d938 100644 --- a/arch/arm/boot/dts/mmp3.dtsi +++ b/arch/arm/boot/dts/mmp3.dtsi @@ -183,14 +183,14 @@ mrvl,intc-nr-irqs = <5>; }; - usb_otg_phy0: usb-otg-phy@d4207000 { + usb_otg_phy0: usb-phy@d4207000 { compatible = "marvell,mmp3-usb-phy"; reg = <0xd4207000 0x40>; #phy-cells = <0>; status = "disabled"; }; - usb_otg0: usb-otg@d4208000 { + usb_otg0: usb@d4208000 { compatible = "marvell,pxau2o-ehci"; reg = <0xd4208000 0x200>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; @@ -201,14 +201,14 @@ status = "disabled"; }; - hsic_phy0: hsic-phy@f0001800 { + hsic_phy0: usb-phy@f0001800 { compatible = "marvell,mmp3-hsic-phy"; reg = <0xf0001800 0x40>; #phy-cells = <0>; status = "disabled"; }; - hsic0: hsic@f0001000 { + hsic0: usb@f0001000 { compatible = "marvell,pxau2o-ehci"; reg = <0xf0001000 0x200>; interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; @@ -222,14 +222,14 @@ status = "disabled"; }; - hsic_phy1: hsic-phy@f0002800 { + hsic_phy1: usb-phy@f0002800 { compatible = "marvell,mmp3-hsic-phy"; reg = <0xf0002800 0x40>; #phy-cells = <0>; status = "disabled"; }; - hsic1: hsic@f0002000 { + hsic1: usb@f0002000 { compatible = "marvell,pxau2o-ehci"; reg = <0xf0002000 0x200>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; @@ -279,6 +279,16 @@ status = "disabled"; }; + mmc5: mmc@d4217000 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xd4217000 0x120>; + clocks = <&soc_clocks MMP3_CLK_SDH4>; + clock-names = "io"; + interrupt-parent = <&hsi1_mux>; + interrupts = <0>; + status = "disabled"; + }; + camera0: camera@d420a000 { compatible = "marvell,mmp2-ccic"; reg = <0xd420a000 0x800>; @@ -472,7 +482,7 @@ rtc: rtc@d4010000 { compatible = "mrvl,mmp-rtc"; reg = <0xd4010000 0x1000>; - interrupts = <1 0>; + interrupts = <1>, <0>; interrupt-names = "rtc 1Hz", "rtc alarm"; interrupt-parent = <&rtc_mux>; clocks = <&soc_clocks MMP2_CLK_RTC>; @@ -521,7 +531,7 @@ }; }; - l2: l2-cache-controller@d0020000 { + l2: cache-controller@d0020000 { compatible = "marvell,tauros3-cache", "arm,pl310-cache"; reg = <0xd0020000 0x1000>; cache-unified; diff --git a/arch/arm/boot/dts/mt2701-evb.dts b/arch/arm/boot/dts/mt2701-evb.dts index 88f8fd22302a..d1535f385f36 100644 --- a/arch/arm/boot/dts/mt2701-evb.dts +++ b/arch/arm/boot/dts/mt2701-evb.dts @@ -6,6 +6,7 @@ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "mt2701.dtsi" / { @@ -61,6 +62,15 @@ >; default-brightness-level = <9>; }; + + usb_vbus: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&pio 45 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; }; &auxadc { @@ -230,3 +240,14 @@ &uart0 { status = "okay"; }; + +&usb2 { + status = "okay"; + usb-role-switch; + connector{ + compatible = "gpio-usb-b-connector", "usb-b-connector"; + type = "micro"; + id-gpios = <&pio 44 GPIO_ACTIVE_HIGH>; + vbus-supply = <&usb_vbus>; + }; +}; diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi index 2093b38d6e6d..39b3a2f4bef4 100644 --- a/arch/arm/boot/dts/mt2701.dtsi +++ b/arch/arm/boot/dts/mt2701.dtsi @@ -671,6 +671,39 @@ }; }; + usb2: usb@11200000 { + compatible = "mediatek,mt2701-musb", + "mediatek,mtk-musb"; + reg = <0 0x11200000 0 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "mc"; + phys = <&u2port2 PHY_TYPE_USB2>; + dr_mode = "otg"; + clocks = <&pericfg CLK_PERI_USB0>, + <&pericfg CLK_PERI_USB0_MCU>, + <&pericfg CLK_PERI_USB_SLV>; + clock-names = "main","mcu","univpll"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; + status = "disabled"; + }; + + u2phy0: usb-phy@11210000 { + compatible = "mediatek,generic-tphy-v1"; + reg = <0 0x11210000 0 0x0800>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "okay"; + + u2port2: usb-phy@1a1c4800 { + reg = <0 0x11210800 0 0x0100>; + clocks = <&topckgen CLK_TOP_USB_PHY48M>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; + }; + ethsys: syscon@1b000000 { compatible = "mediatek,mt2701-ethsys", "syscon"; reg = <0 0x1b000000 0 0x1000>; diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index f76b4a3c34b9..3a6b856e5b74 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -3,6 +3,7 @@ * Copyright (c) 2017-2018 MediaTek Inc. * Author: John Crispin <john@phrozen.org> * Sean Wang <sean.wang@mediatek.com> + * Ryder Lee <ryder.lee@mediatek.com> * */ @@ -733,6 +734,30 @@ #reset-cells = <1>; }; + mali: gpu@13040000 { + compatible = "mediatek,mt7623-mali", "arm,mali-450"; + reg = <0 0x13040000 0 0x30000>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 171 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 172 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 173 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 174 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 175 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 176 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 177 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 178 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 179 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pp1", + "ppmmu1", "pp2", "ppmmu2", "pp3", "ppmmu3", + "pp"; + clocks = <&topckgen CLK_TOP_MMPLL>, + <&g3dsys CLK_G3DSYS_CORE>; + clock-names = "bus", "core"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_MFG>; + resets = <&g3dsys MT2701_G3DSYS_CORE_RST>; + }; + mmsys: syscon@14000000 { compatible = "mediatek,mt7623-mmsys", "mediatek,mt2701-mmsys", diff --git a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts index b7606130ade9..0447748f9fa0 100644 --- a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts +++ b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts @@ -138,6 +138,7 @@ mac@1 { compatible = "mediatek,eth-mac"; reg = <1>; + phy-mode = "rgmii"; phy-handle = <&phy5>; }; diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi index a7e718c4ccea..5217805bf126 100644 --- a/arch/arm/boot/dts/omap5-l4.dtsi +++ b/arch/arm/boot/dts/omap5-l4.dtsi @@ -1003,6 +1003,7 @@ <0x00090000 0x00090000 0x002000>, /* ap 55 */ <0x00092000 0x00092000 0x001000>, /* ap 56 */ <0x000a4000 0x000a4000 0x001000>, /* ap 57 */ + <0x000a5000 0x000a5000 0x001000>, <0x000a6000 0x000a6000 0x001000>, /* ap 58 */ <0x000a8000 0x000a8000 0x004000>, /* ap 59 */ <0x000ac000 0x000ac000 0x001000>, /* ap 60 */ @@ -1908,6 +1909,36 @@ <0x00001000 0x000a5000 0x00001000>; }; + des_target: target-module@a5000 { /* 0x480a5000 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0xa5030 0x4>, + <0xa5034 0x4>, + <0xa5038 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4sec_clkdm */ + clocks = <&l4sec_clkctrl OMAP5_DES3DES_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xa5000 0x00001000>; + status = "disabled"; + + des: des@0 { + compatible = "ti,omap4-des"; + reg = <0 0xa0>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 117>, <&sdma 116>; + dma-names = "tx", "rx"; + }; + }; + target-module@a8000 { /* 0x480a8000, ap 59 2a.0 */ compatible = "ti,sysc"; status = "disabled"; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index e30a556f7c18..fb889c5b00c9 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -247,6 +247,92 @@ hw-caps-temp-alert; }; + aes1_target: target-module@4b501000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x4b501080 0x4>, + <0x4b501084 0x4>, + <0x4b501088 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4sec_clkdm */ + clocks = <&l4sec_clkctrl OMAP5_AES1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4b501000 0x1000>; + + aes1: aes@0 { + compatible = "ti,omap4-aes"; + reg = <0 0xa0>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 111>, <&sdma 110>; + dma-names = "tx", "rx"; + }; + }; + + aes2_target: target-module@4b701000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x4b701080 0x4>, + <0x4b701084 0x4>, + <0x4b701088 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4sec_clkdm */ + clocks = <&l4sec_clkctrl OMAP5_AES2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4b701000 0x1000>; + + aes2: aes@0 { + compatible = "ti,omap4-aes"; + reg = <0 0xa0>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 114>, <&sdma 113>; + dma-names = "tx", "rx"; + }; + }; + + sham_target: target-module@4b100000 { + compatible = "ti,sysc-omap3-sham", "ti,sysc"; + reg = <0x4b100100 0x4>, + <0x4b100110 0x4>, + <0x4b100114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4sec_clkdm */ + clocks = <&l4sec_clkctrl OMAP5_SHA2MD5_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4b100000 0x1000>; + + sham: sham@0 { + compatible = "ti,omap4-sham"; + reg = <0 0x300>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 119>; + dma-names = "rx"; + }; + }; + bandgap: bandgap@4a0021e0 { reg = <0x4a0021e0 0xc 0x4a00232c 0xc diff --git a/arch/arm/boot/dts/pxa168.dtsi b/arch/arm/boot/dts/pxa168.dtsi index 9a9e38245e88..4fe7735c7c58 100644 --- a/arch/arm/boot/dts/pxa168.dtsi +++ b/arch/arm/boot/dts/pxa168.dtsi @@ -97,7 +97,7 @@ resets = <&soc_clocks PXA168_CLK_GPIO>; interrupt-names = "gpio_mux"; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; ranges; gcb0: gpio@d4019000 { @@ -119,6 +119,8 @@ twsi1: i2c@d4011000 { compatible = "mrvl,mmp-twsi"; + #address-cells = <1>; + #size-cells = <0>; reg = <0xd4011000 0x1000>; interrupts = <7>; clocks = <&soc_clocks PXA168_CLK_TWSI0>; @@ -129,6 +131,8 @@ twsi2: i2c@d4025000 { compatible = "mrvl,mmp-twsi"; + #address-cells = <1>; + #size-cells = <0>; reg = <0xd4025000 0x1000>; interrupts = <58>; clocks = <&soc_clocks PXA168_CLK_TWSI1>; @@ -139,7 +143,7 @@ rtc: rtc@d4010000 { compatible = "mrvl,mmp-rtc"; reg = <0xd4010000 0x1000>; - interrupts = <5 6>; + interrupts = <5>, <6>; interrupt-names = "rtc 1Hz", "rtc alarm"; clocks = <&soc_clocks PXA168_CLK_RTC>; resets = <&soc_clocks PXA168_CLK_RTC>; diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi index c237a0e4b12a..d19674812cd2 100644 --- a/arch/arm/boot/dts/pxa3xx.dtsi +++ b/arch/arm/boot/dts/pxa3xx.dtsi @@ -170,7 +170,7 @@ clocks = <&clks CLK_GPIO>; gpio-ranges = <&pinctrl 0 0 128>; interrupt-names = "gpio0", "gpio1", "gpio_mux"; - interrupts = <8 9 10>; + interrupts = <8>, <9>, <10>; gpio-controller; #gpio-cells = <0x2>; interrupt-controller; diff --git a/arch/arm/boot/dts/pxa910.dtsi b/arch/arm/boot/dts/pxa910.dtsi index 587a5e7f0702..352a39357810 100644 --- a/arch/arm/boot/dts/pxa910.dtsi +++ b/arch/arm/boot/dts/pxa910.dtsi @@ -109,7 +109,7 @@ clocks = <&soc_clocks PXA910_CLK_GPIO>; resets = <&soc_clocks PXA910_CLK_GPIO>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; ranges; gcb0: gpio@d4019000 { @@ -155,7 +155,7 @@ rtc: rtc@d4010000 { compatible = "mrvl,mmp-rtc"; reg = <0xd4010000 0x1000>; - interrupts = <5 6>; + interrupts = <5>, <6>; interrupt-names = "rtc 1Hz", "rtc alarm"; clocks = <&soc_clocks PXA910_CLK_RTC>; resets = <&soc_clocks PXA910_CLK_RTC>; diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index b9839f86e703..74d8e2c8e4b3 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -166,6 +166,7 @@ <1 4 0xf08>, <1 1 0xf08>; clock-frequency = <48000000>; + always-on; }; soc { diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index 4021f661cd11..b912da9a3ff3 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -93,6 +93,12 @@ }; }; + firmware { + scm { + compatible = "qcom,scm-ipq806x", "qcom,scm"; + }; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts index eaa1001d0a46..d4dc98214225 100644 --- a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts +++ b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts @@ -1,7 +1,9 @@ // SPDX-License-Identifier: GPL-2.0 #include "qcom-msm8974pro.dtsi" -#include "qcom-pm8841.dtsi" -#include "qcom-pm8941.dtsi" +#include "qcom-pma8084.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> / { model = "Samsung Galaxy S5"; @@ -14,6 +16,194 @@ chosen { stdout-path = "serial0:115200n8"; }; + + smd { + rpm { + rpm_requests { + pma8084-regulators { + compatible = "qcom,rpm-pma8084-regulators"; + status = "okay"; + + pma8084_s1: s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + }; + + pma8084_s2: s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + pma8084_s3: s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pma8084_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_s5: s5 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + + pma8084_s6: s6 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + pma8084_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pma8084_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pma8084_l3: l3 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1200000>; + }; + + pma8084_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1225000>; + }; + + pma8084_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pma8084_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pma8084_l11: l11 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pma8084_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pma8084_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pma8084_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pma8084_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pma8084_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pma8084_l19: l19 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3300000>; + }; + + pma8084_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + pma8084_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pma8084_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pma8084_l23: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pma8084_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pma8084_l25: l25 { + regulator-min-microvolt = <2100000>; + regulator-max-microvolt = <2100000>; + }; + + pma8084_l26: l26 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2050000>; + }; + + pma8084_l27: l27 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1225000>; + }; + + pma8084_lvs1: lvs1 {}; + pma8084_lvs2: lvs2 {}; + pma8084_lvs3: lvs3 {}; + pma8084_lvs4: lvs4 {}; + + pma8084_5vs1: 5vs1 {}; + }; + }; + }; + }; + + /delete-node/ vreg-boost; }; &soc { @@ -21,4 +211,215 @@ status = "ok"; }; + gpio-keys { + compatible = "gpio-keys"; + input-name = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + volume-down { + label = "volume_down"; + gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <15>; + }; + + home-key { + label = "home_key"; + gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_HOMEPAGE>; + wakeup-source; + debounce-interval = <15>; + }; + + volume-up { + label = "volume_up"; + gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + }; + }; + + pinctrl@fd510000 { + sdhc1_pin_a: sdhc1-pin-active { + clk { + pins = "sdc1_clk"; + drive-strength = <4>; + bias-disable; + }; + + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <4>; + bias-pull-up; + }; + }; + }; + + sdhci@f9824900 { + status = "ok"; + + vmmc-supply = <&pma8084_l20>; + vqmmc-supply = <&pma8084_s4>; + + bus-width = <8>; + non-removable; + + pinctrl-names = "default"; + pinctrl-0 = <&sdhc1_pin_a>; + }; + + usb@f9a55000 { + status = "ok"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + /*extcon = <&smbb>, <&usb_id>;*/ + /*vbus-supply = <&chg_otg>;*/ + + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy@a { + status = "ok"; + + v1p8-supply = <&pma8084_l6>; + v3p3-supply = <&pma8084_l24>; + + /*extcon = <&smbb>;*/ + qcom,init-seq = /bits/ 8 <0x1 0x64>; + }; + }; + }; + + pinctrl@fd510000 { + i2c6_pins: i2c6 { + mux { + pins = "gpio29", "gpio30"; + function = "blsp_i2c6"; + + drive-strength = <2>; + bias-disable; + }; + }; + }; + + i2c@f9928000 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_pins>; + + pmic@60 { + reg = <0x60>; + compatible = "maxim,max77826"; + + regulators { + max77826_ldo1: LDO1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + max77826_ldo2: LDO2 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + max77826_ldo3: LDO3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + max77826_ldo4: LDO4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo5: LDO5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo6: LDO6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo7: LDO7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo8: LDO8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo9: LDO9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo10: LDO10 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2950000>; + }; + + max77826_ldo11: LDO11 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2950000>; + }; + + max77826_ldo12: LDO12 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo13: LDO13 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo14: LDO14 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo15: LDO15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_buck: BUCK { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + max77826_buckboost: BUCKBOOST { + regulator-min-microvolt = <3400000>; + regulator-max-microvolt = <3400000>; + }; + }; + }; + }; +}; + +&spmi_bus { + pma8084@0 { + gpios@c000 { + gpio_keys_pin_a: gpio-keys-active { + pins = "gpio2", "gpio3", "gpio5"; + function = "normal"; + + bias-pull-up; + power-source = <PMA8084_GPIO_S4>; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 2ea2308d91b3..51f5f904f9eb 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -974,6 +974,17 @@ #size-cells = <0>; }; + blsp_i2c6: i2c@f9928000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9928000 0x1000>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + }; + blsp_i2c8: i2c@f9964000 { status = "disabled"; compatible = "qcom,i2c-qup-v2.1.1"; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 90feb2cf9960..0588d4446f9a 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -83,7 +83,7 @@ }; cmt1: timer@e6138000 { - compatible = "renesas,cmt-48-r8a7740", "renesas,cmt-48"; + compatible = "renesas,r8a7740-cmt1"; reg = <0xe6138000 0x170>; interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7740_CLK_CMT1>; diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts new file mode 100644 index 000000000000..1f5c35c66d91 --- /dev/null +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the iWave-RZ/G1H Qseven board + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a7742-iwg21m.dtsi" + +/ { + model = "iWave Systems RainboW-G21D-Qseven board based on RZ/G1H"; + compatible = "iwave,g21d", "iwave,g21m", "renesas,r8a7742"; + + aliases { + serial2 = &scifa2; + }; + + chosen { + bootargs = "ignore_loglevel root=/dev/mmcblk0p1 rw rootwait"; + stdout-path = "serial2:115200n8"; + }; +}; + +&pfc { + scifa2_pins: scifa2 { + groups = "scifa2_data_c"; + function = "scifa2"; + }; +}; + +&scifa2 { + pinctrl-0 = <&scifa2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a7742-iwg21m.dtsi b/arch/arm/boot/dts/r8a7742-iwg21m.dtsi new file mode 100644 index 000000000000..85aff429d408 --- /dev/null +++ b/arch/arm/boot/dts/r8a7742-iwg21m.dtsi @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the iWave RZ/G1H Qseven SOM + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +#include "r8a7742.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + compatible = "iwave,g21m", "renesas,r8a7742"; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x40000000>; + }; + + memory@200000000 { + device_type = "memory"; + reg = <2 0x00000000 0 0x40000000>; + }; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&extal_clk { + clock-frequency = <20000000>; +}; + +&pfc { + mmc1_pins: mmc1 { + groups = "mmc1_data4", "mmc1_ctrl"; + function = "mmc1"; + }; +}; + +&mmcif1 { + pinctrl-0 = <&mmc1_pins>; + pinctrl-names = "default"; + + vmmc-supply = <®_3p3v>; + bus-width = <4>; + non-removable; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/r8a7742.dtsi new file mode 100644 index 000000000000..305d8086a3dd --- /dev/null +++ b/arch/arm/boot/dts/r8a7742.dtsi @@ -0,0 +1,648 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the r8a7742 SoC + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +#include <dt-bindings/clock/r8a7742-cpg-mssr.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/power/r8a7742-sysc.h> + +/ { + compatible = "renesas,r8a7742"; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + clock-frequency = <1400000000>; + clocks = <&cpg CPG_CORE R8A7742_CLK_Z>; + power-domains = <&sysc R8A7742_PD_CA15_CPU0>; + next-level-cache = <&L2_CA15>; + capacity-dmips-mhz = <1024>; + voltage-tolerance = <1>; /* 1% */ + clock-latency = <300000>; /* 300 us */ + + /* kHz - uV - OPPs unknown yet */ + operating-points = <1400000 1000000>, + <1225000 1000000>, + <1050000 1000000>, + < 875000 1000000>, + < 700000 1000000>, + < 350000 1000000>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + clock-frequency = <1400000000>; + clocks = <&cpg CPG_CORE R8A7742_CLK_Z>; + power-domains = <&sysc R8A7742_PD_CA15_CPU1>; + next-level-cache = <&L2_CA15>; + capacity-dmips-mhz = <1024>; + voltage-tolerance = <1>; /* 1% */ + clock-latency = <300000>; /* 300 us */ + + /* kHz - uV - OPPs unknown yet */ + operating-points = <1400000 1000000>, + <1225000 1000000>, + <1050000 1000000>, + < 875000 1000000>, + < 700000 1000000>, + < 350000 1000000>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <2>; + clock-frequency = <1400000000>; + clocks = <&cpg CPG_CORE R8A7742_CLK_Z>; + power-domains = <&sysc R8A7742_PD_CA15_CPU2>; + next-level-cache = <&L2_CA15>; + capacity-dmips-mhz = <1024>; + voltage-tolerance = <1>; /* 1% */ + clock-latency = <300000>; /* 300 us */ + + /* kHz - uV - OPPs unknown yet */ + operating-points = <1400000 1000000>, + <1225000 1000000>, + <1050000 1000000>, + < 875000 1000000>, + < 700000 1000000>, + < 350000 1000000>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <3>; + clock-frequency = <1400000000>; + clocks = <&cpg CPG_CORE R8A7742_CLK_Z>; + power-domains = <&sysc R8A7742_PD_CA15_CPU3>; + next-level-cache = <&L2_CA15>; + capacity-dmips-mhz = <1024>; + voltage-tolerance = <1>; /* 1% */ + clock-latency = <300000>; /* 300 us */ + + /* kHz - uV - OPPs unknown yet */ + operating-points = <1400000 1000000>, + <1225000 1000000>, + <1050000 1000000>, + < 875000 1000000>, + < 700000 1000000>, + < 350000 1000000>; + }; + + cpu4: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x100>; + clock-frequency = <780000000>; + clocks = <&cpg CPG_CORE R8A7742_CLK_Z2>; + power-domains = <&sysc R8A7742_PD_CA7_CPU0>; + next-level-cache = <&L2_CA7>; + }; + + cpu5: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x101>; + clock-frequency = <780000000>; + clocks = <&cpg CPG_CORE R8A7742_CLK_Z2>; + power-domains = <&sysc R8A7742_PD_CA7_CPU1>; + next-level-cache = <&L2_CA7>; + }; + + cpu6: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x102>; + clock-frequency = <780000000>; + clocks = <&cpg CPG_CORE R8A7742_CLK_Z2>; + power-domains = <&sysc R8A7742_PD_CA7_CPU2>; + next-level-cache = <&L2_CA7>; + }; + + cpu7: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x103>; + clock-frequency = <780000000>; + clocks = <&cpg CPG_CORE R8A7742_CLK_Z2>; + power-domains = <&sysc R8A7742_PD_CA7_CPU3>; + next-level-cache = <&L2_CA7>; + }; + + L2_CA15: cache-controller-0 { + compatible = "cache"; + power-domains = <&sysc R8A7742_PD_CA15_SCU>; + cache-unified; + cache-level = <2>; + }; + + L2_CA7: cache-controller-1 { + compatible = "cache"; + power-domains = <&sysc R8A7742_PD_CA7_SCU>; + cache-unified; + cache-level = <2>; + }; + }; + + /* External root clock */ + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; + + pmu-0 { + compatible = "arm,cortex-a15-pmu"; + interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + pmu-1 { + compatible = "arm,cortex-a7-pmu"; + interrupts-extended = <&gic GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>; + }; + + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a7742", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6050000 0 0x50>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 912>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 912>; + }; + + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a7742", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6051000 0 0x50>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 30>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 911>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 911>; + }; + + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a7742", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6052000 0 0x50>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 30>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 910>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 910>; + }; + + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a7742", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6053000 0 0x50>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 909>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 909>; + }; + + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a7742", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6054000 0 0x50>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 908>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 908>; + }; + + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a7742", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6055000 0 0x50>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 907>; + }; + + pfc: pin-controller@e6060000 { + compatible = "renesas,pfc-r8a7742"; + reg = <0 0xe6060000 0 0x250>; + }; + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a7742-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&usb_extal_clk>; + clock-names = "extal", "usb_extal"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a7742-rst"; + reg = <0 0xe6160000 0 0x0100>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a7742-sysc"; + reg = <0 0xe6180000 0 0x0200>; + #power-domain-cells = <1>; + }; + + irqc: interrupt-controller@e61c0000 { + compatible = "renesas,irqc-r8a7742", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 407>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 407>; + }; + + icram0: sram@e63a0000 { + compatible = "mmio-sram"; + reg = <0 0xe63a0000 0 0x12000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xe63a0000 0x12000>; + }; + + icram1: sram@e63c0000 { + compatible = "mmio-sram"; + reg = <0 0xe63c0000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xe63c0000 0x1000>; + + smp-sram@0 { + compatible = "renesas,smp-sram"; + reg = <0 0x100>; + }; + }; + + icram2: sram@e6300000 { + compatible = "mmio-sram"; + reg = <0 0xe6300000 0 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xe6300000 0x40000>; + }; + + dmac0: dma-controller@e6700000 { + compatible = "renesas,dmac-r8a7742", + "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x20000>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&cpg CPG_MOD 219>; + clock-names = "fck"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 219>; + #dma-cells = <1>; + dma-channels = <15>; + }; + + dmac1: dma-controller@e6720000 { + compatible = "renesas,dmac-r8a7742", + "renesas,rcar-dmac"; + reg = <0 0xe6720000 0 0x20000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 218>; + #dma-cells = <1>; + dma-channels = <15>; + }; + + scifa0: serial@e6c40000 { + compatible = "renesas,scifa-r8a7742", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c40000 0 0x40>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 204>; + clock-names = "fck"; + dmas = <&dmac0 0x21>, <&dmac0 0x22>, + <&dmac1 0x21>, <&dmac1 0x22>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 204>; + status = "disabled"; + }; + + scifa1: serial@e6c50000 { + compatible = "renesas,scifa-r8a7742", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c50000 0 0x40>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 203>; + clock-names = "fck"; + dmas = <&dmac0 0x25>, <&dmac0 0x26>, + <&dmac1 0x25>, <&dmac1 0x26>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 203>; + status = "disabled"; + }; + + scifa2: serial@e6c60000 { + compatible = "renesas,scifa-r8a7742", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c60000 0 0x40>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 202>; + clock-names = "fck"; + dmas = <&dmac0 0x27>, <&dmac0 0x28>, + <&dmac1 0x27>, <&dmac1 0x28>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 202>; + status = "disabled"; + }; + + scifb0: serial@e6c20000 { + compatible = "renesas,scifb-r8a7742", + "renesas,rcar-gen2-scifb", "renesas,scifb"; + reg = <0 0xe6c20000 0 0x100>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 206>; + clock-names = "fck"; + dmas = <&dmac0 0x3d>, <&dmac0 0x3e>, + <&dmac1 0x3d>, <&dmac1 0x3e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 206>; + status = "disabled"; + }; + + scifb1: serial@e6c30000 { + compatible = "renesas,scifb-r8a7742", + "renesas,rcar-gen2-scifb", "renesas,scifb"; + reg = <0 0xe6c30000 0 0x100>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 207>; + clock-names = "fck"; + dmas = <&dmac0 0x19>, <&dmac0 0x1a>, + <&dmac1 0x19>, <&dmac1 0x1a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 207>; + status = "disabled"; + }; + + scifb2: serial@e6ce0000 { + compatible = "renesas,scifb-r8a7742", + "renesas,rcar-gen2-scifb", "renesas,scifb"; + reg = <0 0xe6ce0000 0 0x100>; + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 216>; + clock-names = "fck"; + dmas = <&dmac0 0x1d>, <&dmac0 0x1e>, + <&dmac1 0x1d>, <&dmac1 0x1e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 216>; + status = "disabled"; + }; + + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a7742", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e60000 0 0x40>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 721>, + <&cpg CPG_CORE R8A7742_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x29>, <&dmac0 0x2a>, + <&dmac1 0x29>, <&dmac1 0x2a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 721>; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a7742", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e68000 0 0x40>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 720>, + <&cpg CPG_CORE R8A7742_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, + <&dmac1 0x2d>, <&dmac1 0x2e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 720>; + status = "disabled"; + }; + + scif2: serial@e6e56000 { + compatible = "renesas,scif-r8a7742", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e56000 0 0x40>; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 310>, + <&cpg CPG_CORE R8A7742_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, + <&dmac1 0x2b>, <&dmac1 0x2c>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 310>; + status = "disabled"; + }; + + hscif0: serial@e62c0000 { + compatible = "renesas,hscif-r8a7742", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62c0000 0 0x60>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 717>, + <&cpg CPG_CORE R8A7742_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x39>, <&dmac0 0x3a>, + <&dmac1 0x39>, <&dmac1 0x3a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 717>; + status = "disabled"; + }; + + hscif1: serial@e62c8000 { + compatible = "renesas,hscif-r8a7742", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62c8000 0 0x60>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 716>, + <&cpg CPG_CORE R8A7742_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, + <&dmac1 0x4d>, <&dmac1 0x4e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 716>; + status = "disabled"; + }; + + mmcif1: mmc@ee220000 { + compatible = "renesas,mmcif-r8a7742", + "renesas,sh-mmcif"; + reg = <0 0xee220000 0 0x80>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 305>; + dmas = <&dmac0 0xe1>, <&dmac0 0xe2>, + <&dmac1 0xe1>, <&dmac1 0xe2>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 305>; + reg-io-width = <4>; + status = "disabled"; + max-frequency = <97500000>; + }; + + gic: interrupt-controller@f1001000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0xf1001000 0 0x1000>, <0 0xf1002000 0 0x2000>, + <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 408>; + }; + + prr: chipid@ff000044 { + compatible = "renesas,prr"; + reg = <0 0xff000044 0 4>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; + + /* External USB clock - can be overridden by the board */ + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; +}; diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi index e8b340bb99bc..fff123753b85 100644 --- a/arch/arm/boot/dts/r8a7743.dtsi +++ b/arch/arm/boot/dts/r8a7743.dtsi @@ -338,7 +338,7 @@ #thermal-sensor-cells = <0>; }; - ipmmu_sy0: mmu@e6280000 { + ipmmu_sy0: iommu@e6280000 { compatible = "renesas,ipmmu-r8a7743", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>; @@ -348,7 +348,7 @@ status = "disabled"; }; - ipmmu_sy1: mmu@e6290000 { + ipmmu_sy1: iommu@e6290000 { compatible = "renesas,ipmmu-r8a7743", "renesas,ipmmu-vmsa"; reg = <0 0xe6290000 0 0x1000>; @@ -357,7 +357,7 @@ status = "disabled"; }; - ipmmu_ds: mmu@e6740000 { + ipmmu_ds: iommu@e6740000 { compatible = "renesas,ipmmu-r8a7743", "renesas,ipmmu-vmsa"; reg = <0 0xe6740000 0 0x1000>; @@ -367,7 +367,7 @@ status = "disabled"; }; - ipmmu_mp: mmu@ec680000 { + ipmmu_mp: iommu@ec680000 { compatible = "renesas,ipmmu-r8a7743", "renesas,ipmmu-vmsa"; reg = <0 0xec680000 0 0x1000>; @@ -376,7 +376,7 @@ status = "disabled"; }; - ipmmu_mx: mmu@fe951000 { + ipmmu_mx: iommu@fe951000 { compatible = "renesas,ipmmu-r8a7743", "renesas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>; @@ -386,7 +386,7 @@ status = "disabled"; }; - ipmmu_gp: mmu@e62a0000 { + ipmmu_gp: iommu@e62a0000 { compatible = "renesas,ipmmu-r8a7743", "renesas,ipmmu-vmsa"; reg = <0 0xe62a0000 0 0x1000>; diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi index def840b8b2d3..5050ac19041d 100644 --- a/arch/arm/boot/dts/r8a7744.dtsi +++ b/arch/arm/boot/dts/r8a7744.dtsi @@ -338,7 +338,7 @@ #thermal-sensor-cells = <0>; }; - ipmmu_sy0: mmu@e6280000 { + ipmmu_sy0: iommu@e6280000 { compatible = "renesas,ipmmu-r8a7744", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>; @@ -348,7 +348,7 @@ status = "disabled"; }; - ipmmu_sy1: mmu@e6290000 { + ipmmu_sy1: iommu@e6290000 { compatible = "renesas,ipmmu-r8a7744", "renesas,ipmmu-vmsa"; reg = <0 0xe6290000 0 0x1000>; @@ -357,7 +357,7 @@ status = "disabled"; }; - ipmmu_ds: mmu@e6740000 { + ipmmu_ds: iommu@e6740000 { compatible = "renesas,ipmmu-r8a7744", "renesas,ipmmu-vmsa"; reg = <0 0xe6740000 0 0x1000>; @@ -367,7 +367,7 @@ status = "disabled"; }; - ipmmu_mp: mmu@ec680000 { + ipmmu_mp: iommu@ec680000 { compatible = "renesas,ipmmu-r8a7744", "renesas,ipmmu-vmsa"; reg = <0 0xec680000 0 0x1000>; @@ -376,7 +376,7 @@ status = "disabled"; }; - ipmmu_mx: mmu@fe951000 { + ipmmu_mx: iommu@fe951000 { compatible = "renesas,ipmmu-r8a7744", "renesas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>; @@ -386,7 +386,7 @@ status = "disabled"; }; - ipmmu_gp: mmu@e62a0000 { + ipmmu_gp: iommu@e62a0000 { compatible = "renesas,ipmmu-r8a7744", "renesas,ipmmu-vmsa"; reg = <0 0xe62a0000 0 0x1000>; diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi index 7ab58d8bb740..b0d1fc24e97e 100644 --- a/arch/arm/boot/dts/r8a7745.dtsi +++ b/arch/arm/boot/dts/r8a7745.dtsi @@ -302,7 +302,7 @@ resets = <&cpg 407>; }; - ipmmu_sy0: mmu@e6280000 { + ipmmu_sy0: iommu@e6280000 { compatible = "renesas,ipmmu-r8a7745", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>; @@ -312,7 +312,7 @@ status = "disabled"; }; - ipmmu_sy1: mmu@e6290000 { + ipmmu_sy1: iommu@e6290000 { compatible = "renesas,ipmmu-r8a7745", "renesas,ipmmu-vmsa"; reg = <0 0xe6290000 0 0x1000>; @@ -321,7 +321,7 @@ status = "disabled"; }; - ipmmu_ds: mmu@e6740000 { + ipmmu_ds: iommu@e6740000 { compatible = "renesas,ipmmu-r8a7745", "renesas,ipmmu-vmsa"; reg = <0 0xe6740000 0 0x1000>; @@ -331,7 +331,7 @@ status = "disabled"; }; - ipmmu_mp: mmu@ec680000 { + ipmmu_mp: iommu@ec680000 { compatible = "renesas,ipmmu-r8a7745", "renesas,ipmmu-vmsa"; reg = <0 0xec680000 0 0x1000>; @@ -340,7 +340,7 @@ status = "disabled"; }; - ipmmu_mx: mmu@fe951000 { + ipmmu_mx: iommu@fe951000 { compatible = "renesas,ipmmu-r8a7745", "renesas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>; @@ -350,7 +350,7 @@ status = "disabled"; }; - ipmmu_gp: mmu@e62a0000 { + ipmmu_gp: iommu@e62a0000 { compatible = "renesas,ipmmu-r8a7745", "renesas,ipmmu-vmsa"; reg = <0 0xe62a0000 0 0x1000>; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index e5ef9fd4284a..166d5566229d 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -427,7 +427,7 @@ #thermal-sensor-cells = <0>; }; - ipmmu_sy0: mmu@e6280000 { + ipmmu_sy0: iommu@e6280000 { compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>; @@ -437,7 +437,7 @@ status = "disabled"; }; - ipmmu_sy1: mmu@e6290000 { + ipmmu_sy1: iommu@e6290000 { compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xe6290000 0 0x1000>; @@ -446,7 +446,7 @@ status = "disabled"; }; - ipmmu_ds: mmu@e6740000 { + ipmmu_ds: iommu@e6740000 { compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xe6740000 0 0x1000>; @@ -456,7 +456,7 @@ status = "disabled"; }; - ipmmu_mp: mmu@ec680000 { + ipmmu_mp: iommu@ec680000 { compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xec680000 0 0x1000>; @@ -465,7 +465,7 @@ status = "disabled"; }; - ipmmu_mx: mmu@fe951000 { + ipmmu_mx: iommu@fe951000 { compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>; @@ -475,7 +475,7 @@ status = "disabled"; }; - ipmmu_rt: mmu@ffc80000 { + ipmmu_rt: iommu@ffc80000 { compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xffc80000 0 0x1000>; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 6e5bd86731cd..225676fbe312 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -291,6 +291,17 @@ reg = <0 0xe6060000 0 0x250>; }; + tpu: pwm@e60f0000 { + compatible = "renesas,tpu-r8a7791", "renesas,tpu"; + reg = <0 0xe60f0000 0 0x148>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 304>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 304>; + #pwm-cells = <3>; + status = "disabled"; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a7791-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; @@ -350,7 +361,7 @@ #thermal-sensor-cells = <0>; }; - ipmmu_sy0: mmu@e6280000 { + ipmmu_sy0: iommu@e6280000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>; @@ -360,7 +371,7 @@ status = "disabled"; }; - ipmmu_sy1: mmu@e6290000 { + ipmmu_sy1: iommu@e6290000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xe6290000 0 0x1000>; @@ -369,7 +380,7 @@ status = "disabled"; }; - ipmmu_ds: mmu@e6740000 { + ipmmu_ds: iommu@e6740000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xe6740000 0 0x1000>; @@ -379,7 +390,7 @@ status = "disabled"; }; - ipmmu_mp: mmu@ec680000 { + ipmmu_mp: iommu@ec680000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xec680000 0 0x1000>; @@ -388,7 +399,7 @@ status = "disabled"; }; - ipmmu_mx: mmu@fe951000 { + ipmmu_mx: iommu@fe951000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>; @@ -398,7 +409,7 @@ status = "disabled"; }; - ipmmu_rt: mmu@ffc80000 { + ipmmu_rt: iommu@ffc80000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xffc80000 0 0x1000>; @@ -407,7 +418,7 @@ status = "disabled"; }; - ipmmu_gp: mmu@e62a0000 { + ipmmu_gp: iommu@e62a0000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xe62a0000 0 0x1000>; @@ -1067,6 +1078,76 @@ status = "disabled"; }; + pwm0: pwm@e6e30000 { + compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar"; + reg = <0 0xe6e30000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm1: pwm@e6e31000 { + compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar"; + reg = <0 0xe6e31000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm@e6e32000 { + compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar"; + reg = <0 0xe6e32000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm@e6e33000 { + compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar"; + reg = <0 0xe6e33000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm@e6e34000 { + compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar"; + reg = <0 0xe6e34000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm5: pwm@e6e35000 { + compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar"; + reg = <0 0xe6e35000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm6: pwm@e6e36000 { + compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar"; + reg = <0 0xe6e36000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + adc: adc@e6e54000 { compatible = "renesas,r8a7791-gyroadc", "renesas,rcar-gyroadc"; diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index dadbda16161b..1b62a7e06b42 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -336,7 +336,7 @@ #thermal-sensor-cells = <0>; }; - ipmmu_sy0: mmu@e6280000 { + ipmmu_sy0: iommu@e6280000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>; @@ -346,7 +346,7 @@ status = "disabled"; }; - ipmmu_sy1: mmu@e6290000 { + ipmmu_sy1: iommu@e6290000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xe6290000 0 0x1000>; @@ -355,7 +355,7 @@ status = "disabled"; }; - ipmmu_ds: mmu@e6740000 { + ipmmu_ds: iommu@e6740000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xe6740000 0 0x1000>; @@ -365,7 +365,7 @@ status = "disabled"; }; - ipmmu_mp: mmu@ec680000 { + ipmmu_mp: iommu@ec680000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xec680000 0 0x1000>; @@ -374,7 +374,7 @@ status = "disabled"; }; - ipmmu_mx: mmu@fe951000 { + ipmmu_mx: iommu@fe951000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>; @@ -384,7 +384,7 @@ status = "disabled"; }; - ipmmu_rt: mmu@ffc80000 { + ipmmu_rt: iommu@ffc80000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xffc80000 0 0x1000>; @@ -393,7 +393,7 @@ status = "disabled"; }; - ipmmu_gp: mmu@e62a0000 { + ipmmu_gp: iommu@e62a0000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xe62a0000 0 0x1000>; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 2c9e7a1ebfec..8d7f8798628a 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -290,7 +290,7 @@ resets = <&cpg 407>; }; - ipmmu_sy0: mmu@e6280000 { + ipmmu_sy0: iommu@e6280000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>; @@ -300,7 +300,7 @@ status = "disabled"; }; - ipmmu_sy1: mmu@e6290000 { + ipmmu_sy1: iommu@e6290000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xe6290000 0 0x1000>; @@ -309,7 +309,7 @@ status = "disabled"; }; - ipmmu_ds: mmu@e6740000 { + ipmmu_ds: iommu@e6740000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xe6740000 0 0x1000>; @@ -319,7 +319,7 @@ status = "disabled"; }; - ipmmu_mp: mmu@ec680000 { + ipmmu_mp: iommu@ec680000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xec680000 0 0x1000>; @@ -328,7 +328,7 @@ status = "disabled"; }; - ipmmu_mx: mmu@fe951000 { + ipmmu_mx: iommu@fe951000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>; @@ -338,7 +338,7 @@ status = "disabled"; }; - ipmmu_gp: mmu@e62a0000 { + ipmmu_gp: iommu@e62a0000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xe62a0000 0 0x1000>; diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts index 2ff9f152d29b..7154b827ea2f 100644 --- a/arch/arm/boot/dts/rk3036-kylin.dts +++ b/arch/arm/boot/dts/rk3036-kylin.dts @@ -16,7 +16,7 @@ leds: gpio-leds { compatible = "gpio-leds"; - work { + work_led: led-0 { gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; label = "kylin:red:led"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts b/arch/arm/boot/dts/rk3066a-mk808.dts index 365eff621113..eed9e60cffa2 100644 --- a/arch/arm/boot/dts/rk3066a-mk808.dts +++ b/arch/arm/boot/dts/rk3066a-mk808.dts @@ -22,7 +22,7 @@ gpio-leds { compatible = "gpio-leds"; - blue { + blue_led: led-0 { label = "mk808:blue:power"; gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>; default-state = "off"; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index c9a7f5409960..b0fef82c0a71 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -33,19 +33,19 @@ gpio-leds { compatible = "gpio-leds"; - green { + green_led: led-0 { label = "rock:green:user1"; gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_LOW>; default-state = "off"; }; - blue { + blue_led: led-1 { label = "rock:blue:user2"; gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>; default-state = "off"; }; - sleep { + sleep_led: led-2 { label = "rock:red:power"; gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; default-state = "off"; diff --git a/arch/arm/boot/dts/rk3229-xms6.dts b/arch/arm/boot/dts/rk3229-xms6.dts index 933ef69da32a..263393ac4fa6 100644 --- a/arch/arm/boot/dts/rk3229-xms6.dts +++ b/arch/arm/boot/dts/rk3229-xms6.dts @@ -33,12 +33,18 @@ power-led { compatible = "gpio-leds"; - blue { + blue_led: led-0 { gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; default-state = "on"; }; }; + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>, + <&gpio2 29 GPIO_ACTIVE_LOW>; + }; + vcc_host: vcc-host-regulator { compatible = "regulator-fixed"; enable-active-high; @@ -131,7 +137,6 @@ &emmc { cap-mmc-highspeed; - disable-wp; non-removable; status = "okay"; }; @@ -202,6 +207,16 @@ status = "okay"; }; +&sdio { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + vqmmc-supply = <&vccio_1v8>; + status = "okay"; +}; + &sdmmc { cap-mmc-highspeed; disable-wp; diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index 5485a9918da6..b0fd92befdeb 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -615,6 +615,16 @@ status = "disabled"; }; + rga: rga@20060000 { + compatible = "rockchip,rk3228-rga", "rockchip,rk3288-rga"; + reg = <0x20060000 0x1000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA>; + clock-names = "aclk", "hclk", "sclk"; + resets = <&cru SRST_RGA>, <&cru SRST_RGA_A>, <&cru SRST_RGA_H>; + reset-names = "core", "axi", "ahb"; + }; + iep_mmu: iommu@20070800 { compatible = "rockchip,iommu"; reg = <0x20070800 0x100>; diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rk3288-firefly-reload.dts index 8c38bda21a7c..9a4a9749c405 100644 --- a/arch/arm/boot/dts/rk3288-firefly-reload.dts +++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts @@ -45,20 +45,20 @@ leds { compatible = "gpio-leds"; - power { + power_led: led-0 { gpios = <&gpio8 RK_PA2 GPIO_ACTIVE_LOW>; label = "firefly:blue:power"; pinctrl-names = "default"; - pinctrl-0 = <&power_led>; + pinctrl-0 = <&power_led_pin>; panic-indicator; }; - work { + work_led: led-1 { gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>; label = "firefly:blue:user"; linux,default-trigger = "rc-feedback"; pinctrl-names = "default"; - pinctrl-0 = <&work_led>; + pinctrl-0 = <&work_led_pin>; }; }; @@ -334,11 +334,11 @@ }; leds { - power_led: power-led { + power_led_pin: power-led-pin { rockchip,pins = <8 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; - work_led: work-led { + work_led_pin: work-led-pin { rockchip,pins = <8 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index 5e0a19004e46..e5c4fd4ea67e 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -62,20 +62,20 @@ leds { compatible = "gpio-leds"; - work { + work_led: led-0 { gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>; label = "firefly:blue:user"; linux,default-trigger = "rc-feedback"; pinctrl-names = "default"; - pinctrl-0 = <&work_led>; + pinctrl-0 = <&work_led_pin>; }; - power { + power_led: led-1 { gpios = <&gpio8 RK_PA2 GPIO_ACTIVE_LOW>; label = "firefly:green:power"; linux,default-trigger = "default-on"; pinctrl-names = "default"; - pinctrl-0 = <&power_led>; + pinctrl-0 = <&power_led_pin>; }; }; @@ -429,11 +429,11 @@ }; leds { - power_led: power-led { + power_led_pin: power-led-pin { rockchip,pins = <8 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; - work_led: work-led { + work_led_pin: work-led-pin { rockchip,pins = <8 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts index c41d012c8850..213c9eb84f76 100644 --- a/arch/arm/boot/dts/rk3288-miqi.dts +++ b/arch/arm/boot/dts/rk3288-miqi.dts @@ -30,7 +30,7 @@ leds { compatible = "gpio-leds"; - work { + work_led: led-0 { gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>; label = "miqi:green:user"; linux,default-trigger = "timer"; diff --git a/arch/arm/boot/dts/rk3288-phycore-som.dtsi b/arch/arm/boot/dts/rk3288-phycore-som.dtsi index 77a47b9b756d..e43887c9635f 100644 --- a/arch/arm/boot/dts/rk3288-phycore-som.dtsi +++ b/arch/arm/boot/dts/rk3288-phycore-som.dtsi @@ -36,9 +36,9 @@ leds: user-leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&user_led>; + pinctrl-0 = <&user_led_pin>; - user { + user_led: led-0 { label = "green_led"; gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; @@ -372,7 +372,7 @@ }; leds { - user_led: user-led { + user_led_pin: user-led-pin { rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_output_high>; }; }; diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts index cdcdc921ee09..3cca4d0f9b09 100644 --- a/arch/arm/boot/dts/rk3288-rock2-square.dts +++ b/arch/arm/boot/dts/rk3288-rock2-square.dts @@ -41,13 +41,13 @@ gpio-leds { compatible = "gpio-leds"; - heartbeat { + heartbeat_led: led-0 { gpios = <&gpio7 RK_PB7 GPIO_ACTIVE_LOW>; label = "rock2:green:state1"; linux,default-trigger = "heartbeat"; }; - mmc { + mmc_led: led-1 { gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_LOW>; label = "rock2:blue:state2"; linux,default-trigger = "mmc0"; diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi index acfaa12ec239..90e9be443fe6 100644 --- a/arch/arm/boot/dts/rk3288-tinker.dtsi +++ b/arch/arm/boot/dts/rk3288-tinker.dtsi @@ -46,17 +46,17 @@ gpio-leds { compatible = "gpio-leds"; - act-led { + act_led: led-0 { gpios = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0"; }; - heartbeat-led { + heartbeat_led: led-1 { gpios = <&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; - pwr-led { + pwr_led: led-2 { gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-on"; }; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 0cd88774db95..2e1edd85f04a 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -7,7 +7,6 @@ #include <dt-bindings/clock/rk3288-cru.h> #include <dt-bindings/power/rk3288-power.h> #include <dt-bindings/thermal/thermal.h> -#include <dt-bindings/power/rk3288-power.h> #include <dt-bindings/soc/rockchip,boot-mode.h> / { diff --git a/arch/arm/boot/dts/rtd1195-horseradish.dts b/arch/arm/boot/dts/rtd1195-horseradish.dts new file mode 100644 index 000000000000..9d06d3d34c74 --- /dev/null +++ b/arch/arm/boot/dts/rtd1195-horseradish.dts @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +/* + * Copyright (c) 2019 Andreas Färber + */ + +/dts-v1/; + +#include "rtd1195.dtsi" + +/ { + compatible = "realtek,horseradish", "realtek,rtd1195"; + model = "Realtek Horseradish EVB"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@a800 { + device_type = "memory"; + reg = <0x0000a800 0x17ff5800>, /* boot ROM to r-bus */ + <0x18070000 0x00090000>, /* r-bus to NOR flash */ + <0x19100000 0x26f00000>; /* NOR flash to 1 GiB */ + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rtd1195-mele-x1000.dts b/arch/arm/boot/dts/rtd1195-mele-x1000.dts new file mode 100644 index 000000000000..c7951b9a2c97 --- /dev/null +++ b/arch/arm/boot/dts/rtd1195-mele-x1000.dts @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +/* + * Copyright (c) 2017-2019 Andreas Färber + */ + +/dts-v1/; + +#include "rtd1195.dtsi" + +/ { + compatible = "mele,x1000", "realtek,rtd1195"; + model = "MeLE X1000"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@a800 { + device_type = "memory"; + reg = <0x0000a800 0x17ff5800>, /* boot ROM to r-bus */ + <0x18070000 0x00090000>, /* r-bus to NOR flash */ + <0x19100000 0x26f00000>; /* NOR flash to 1 GiB */ + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rtd1195.dtsi b/arch/arm/boot/dts/rtd1195.dtsi new file mode 100644 index 000000000000..21897210d9d0 --- /dev/null +++ b/arch/arm/boot/dts/rtd1195.dtsi @@ -0,0 +1,217 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +/* + * Copyright (c) 2017-2019 Andreas Färber + */ + +/memreserve/ 0x00000000 0x0000a800; /* boot code */ +/memreserve/ 0x0000a800 0x000f5800; +/memreserve/ 0x17fff000 0x00001000; + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/reset/realtek,rtd1195.h> + +/ { + compatible = "realtek,rtd1195"; + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + clock-frequency = <1000000000>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + clock-frequency = <1000000000>; + }; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + rpc_comm: rpc@b000 { + reg = <0x0000b000 0x1000>; + }; + + audio@1b00000 { + reg = <0x01b00000 0x400000>; + }; + + rpc_ringbuf: rpc@1ffe000 { + reg = <0x01ffe000 0x4000>; + }; + + secure@10000000 { + reg = <0x10000000 0x100000>; + no-map; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <27000000>; + }; + + osc27M: osc { + compatible = "fixed-clock"; + clock-frequency = <27000000>; + #clock-cells = <0>; + clock-output-names = "osc27M"; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x0000a800>, + <0x18000000 0x18000000 0x00070000>, + <0x18100000 0x18100000 0x01000000>, + <0x80000000 0x80000000 0x80000000>; + + rbus: bus@18000000 { + compatible = "simple-bus"; + reg = <0x18000000 0x70000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x18000000 0x70000>; + + crt: syscon@0 { + compatible = "syscon", "simple-mfd"; + reg = <0x0 0x1000>; + reg-io-width = <4>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1000>; + }; + + iso: syscon@7000 { + compatible = "syscon", "simple-mfd"; + reg = <0x7000 0x1000>; + reg-io-width = <4>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x7000 0x1000>; + }; + + sb2: syscon@1a000 { + compatible = "syscon", "simple-mfd"; + reg = <0x1a000 0x1000>; + reg-io-width = <4>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1a000 0x1000>; + }; + + misc: syscon@1b000 { + compatible = "syscon", "simple-mfd"; + reg = <0x1b000 0x1000>; + reg-io-width = <4>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1b000 0x1000>; + }; + + scpu_wrapper: syscon@1d000 { + compatible = "syscon", "simple-mfd"; + reg = <0x1d000 0x1000>; + reg-io-width = <4>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1d000 0x1000>; + }; + }; + + gic: interrupt-controller@ff011000 { + compatible = "arm,cortex-a7-gic"; + reg = <0xff011000 0x1000>, + <0xff012000 0x2000>, + <0xff014000 0x2000>, + <0xff016000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-controller; + #interrupt-cells = <3>; + }; + }; +}; + +&crt { + reset1: reset-controller@0 { + compatible = "snps,dw-low-reset"; + reg = <0x0 0x4>; + #reset-cells = <1>; + }; + + reset2: reset-controller@4 { + compatible = "snps,dw-low-reset"; + reg = <0x4 0x4>; + #reset-cells = <1>; + }; + + reset3: reset-controller@8 { + compatible = "snps,dw-low-reset"; + reg = <0x8 0x4>; + #reset-cells = <1>; + }; +}; + +&iso { + iso_reset: reset-controller@88 { + compatible = "snps,dw-low-reset"; + reg = <0x88 0x4>; + #reset-cells = <1>; + }; + + wdt: watchdog@680 { + compatible = "realtek,rtd1295-watchdog"; + reg = <0x680 0x100>; + clocks = <&osc27M>; + }; + + uart0: serial@800 { + compatible = "snps,dw-apb-uart"; + reg = <0x800 0x400>; + reg-shift = <2>; + reg-io-width = <4>; + resets = <&iso_reset RTD1195_ISO_RSTN_UR0>; + clock-frequency = <27000000>; + status = "disabled"; + }; +}; + +&misc { + uart1: serial@200 { + compatible = "snps,dw-apb-uart"; + reg = <0x200 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + resets = <&reset2 RTD1195_RSTN_UR1>; + clock-frequency = <27000000>; + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi index 8ff70b856334..cf858029292e 100644 --- a/arch/arm/boot/dts/s5pv210-aries.dtsi +++ b/arch/arm/boot/dts/s5pv210-aries.dtsi @@ -11,9 +11,15 @@ / { compatible = "samsung,aries", "samsung,s5pv210"; - aliases { + aliases: aliases { + i2c4 = &i2c_sound; + i2c5 = &i2c_accel; i2c6 = &i2c_pmic; + i2c7 = &i2c_musb; i2c9 = &i2c_fuel; + i2c10 = &i2c_touchkey; + i2c11 = &i2c_prox; + i2c12 = &i2c_magnetometer; }; memory@30000000 { @@ -46,6 +52,21 @@ regulator-name = "vibrator-en"; enable-active-high; gpio = <&gpj1 1 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctr-0 = <&vibrator_ena>; + }; + + touchkey_vdd: regulator-fixed-1 { + compatible = "regulator-fixed"; + regulator-name = "VTOUCH_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpj3 2 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&touchkey_vdd_ena>; }; wifi_pwrseq: wifi-pwrseq { @@ -57,7 +78,71 @@ power-off-delay-us = <500>; }; - i2c_pmic: i2c-gpio-0 { + i2c_sound: i2c-gpio-0 { + compatible = "i2c-gpio"; + sda-gpios = <&mp05 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&mp05 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&sound_i2c_pins>; + + wm8994: wm8994@1a { + compatible = "wlf,wm8994"; + reg = <0x1a>; + + #sound-dai-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + clocks = <&clocks MOUT_CLKOUT>; + clock-names = "MCLK1"; + + AVDD2-supply = <&buck3_reg>; + DBVDD-supply = <&buck3_reg>; + CPVDD-supply = <&buck3_reg>; + SPKVDD1-supply = <&buck3_reg>; + SPKVDD2-supply = <&buck3_reg>; + + wlf,gpio-cfg = <0xa101 0x8100 0x0100 0x0100 0x8100 + 0xa101 0x0100 0x8100 0x0100 0x0100 + 0x0100>; + + wlf,ldo1ena = <&gpf3 4 GPIO_ACTIVE_HIGH>; + wlf,ldo2ena = <&gpf3 4 GPIO_ACTIVE_HIGH>; + + wlf,lineout1-se; + wlf,lineout2-se; + + assigned-clocks = <&clocks MOUT_CLKOUT>; + assigned-clock-rates = <0>; + assigned-clock-parents = <&xusbxti>; + + pinctrl-names = "default"; + pinctrl-0 = <&codec_ldo>; + }; + }; + + i2c_accel: i2c-gpio-1 { + compatible = "i2c-gpio"; + sda-gpios = <&gpj3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpj3 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&accel_i2c_pins>; + + status = "disabled"; + + /* bma023 accelerometer, no mainline binding */ + }; + + i2c_pmic: i2c-gpio-2 { compatible = "i2c-gpio"; sda-gpios = <&gpj4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&gpj4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; @@ -65,6 +150,9 @@ #address-cells = <1>; #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_i2c_pins>; + pmic@66 { compatible = "maxim,max8998"; reg = <0x66>; @@ -81,6 +169,9 @@ max8998,pmic-buck2-dvs-gpio = <&gph0 5 GPIO_ACTIVE_HIGH>; max8998,pmic-buck2-dvs-voltage = <1100000>, <1000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_dvs_pins &pmic_irq>; + regulators { ldo2_reg: LDO2 { regulator-name = "VALIVE_1.2V"; @@ -107,7 +198,6 @@ regulator-name = "VADC_3.3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-always-on; regulator-state-mem { regulator-off-in-suspend; @@ -134,8 +224,6 @@ regulator-name = "VLCD_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - /* Till we get panel driver */ - regulator-always-on; regulator-state-mem { regulator-off-in-suspend; @@ -234,8 +322,6 @@ regulator-name = "VCC_3.0V_LCD"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; - /* Till we get panel driver */ - regulator-always-on; regulator-state-mem { regulator-off-in-suspend; @@ -306,7 +392,29 @@ }; }; - i2c_fuel: i2c-gpio-1 { + i2c_musb: i2c-gpio-3 { + compatible = "i2c-gpio"; + sda-gpios = <&gpj3 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpj3 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&musb_i2c_pins>; + + fsa9480: musb@25 { + compatible = "fcs,fsa9480"; + reg = <0x25>; + interrupt-parent = <&gph2>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&musb_irq>; + }; + }; + + i2c_fuel: i2c-gpio-4 { compatible = "i2c-gpio"; sda-gpios = <&mp05 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&mp05 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; @@ -314,6 +422,9 @@ #address-cells = <1>; #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&fg_i2c_pins>; + fuelgauge@36 { compatible = "maxim,max17040"; interrupt-parent = <&vic0>; @@ -322,6 +433,64 @@ }; }; + i2c_touchkey: i2c-gpio-5 { + compatible = "i2c-gpio"; + sda-gpios = <&gpj3 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpj3 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&touchkey_i2c_pins>; + + touchkey@20 { + compatible = "cypress,aries-touchkey"; + reg = <0x20>; + vdd-supply = <&touchkey_vdd>; + vcc-supply = <&buck3_reg>; + linux,keycodes = <KEY_MENU KEY_BACK + KEY_HOMEPAGE KEY_SEARCH>; + interrupt-parent = <&gpj4>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&touchkey_irq>; + }; + }; + + i2c_prox: i2c-gpio-6 { + compatible = "i2c-gpio"; + sda-gpios = <&gpg2 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpg0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&prox_i2c_pins>; + + status = "disabled"; + + /* Sharp gp2a prox/light sensor, incomplete mainline binding */ + }; + + i2c_magnetometer: i2c-gpio-7 { + compatible = "i2c-gpio"; + sda-gpios = <&gpj0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpj0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&magnetometer_i2c_pins>; + + status = "disabled"; + + /* Yamaha yas529 magnetometer, no mainline binding */ + }; + vibrator: pwm-vibrator { compatible = "pwm-vibrator"; pwms = <&pwm 1 44642 0>; @@ -337,6 +506,45 @@ offset = <0x681c>; /* PS_HOLD_CONTROL */ value = <0x5200>; }; + + spi_lcd: spi-gpio-0 { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + sck-gpios = <&mp04 1 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&mp04 3 GPIO_ACTIVE_HIGH>; + cs-gpios = <&mp01 1 GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; + + pinctrl-names = "default"; + pinctrl-0 = <&lcd_spi_pins>; + + panel@0 { + compatible = "samsung,s6e63m0"; + reg = <0>; + reset-gpios = <&mp05 5 GPIO_ACTIVE_LOW>; + vdd3-supply = <&ldo7_reg>; + vci-supply = <&ldo17_reg>; + spi-cs-high; + spi-max-frequency = <1200000>; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_rst>; + + port { + lcd_ep: endpoint { + remote-endpoint = <&fimd_ep>; + }; + }; + }; + }; +}; + +&adc { + vdd-supply = <&ldo4_reg>; + + status = "okay"; }; &fimd { @@ -347,18 +555,13 @@ samsung,invert-vden; samsung,invert-vclk; - display-timings { - timing-0 { - /* 480x800@60Hz */ - clock-frequency = <25628040>; - hactive = <480>; - vactive = <800>; - hfront-porch = <16>; - hback-porch = <16>; - hsync-len = <2>; - vfront-porch = <28>; - vback-porch = <1>; - vsync-len = <2>; + #address-cells = <1>; + #size-cells = <0>; + + port@3 { + reg = <3>; + fimd_ep: endpoint { + remote-endpoint = <&lcd_ep>; }; }; }; @@ -399,12 +602,39 @@ samsung,pin-val = <1>; }; + codec_ldo: codec-ldo { + samsung,pins = "gpf3-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + }; + + prox_i2c_pins: gp2a-i2c-pins { + samsung,pins = "gpg0-2", "gpg2-2"; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + wlan_gpio_rst: wlan-gpio-rst { samsung,pins = "gpg1-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; + pmic_dvs_pins: pmic-dvs-pins { + samsung,pins = "gph0-3", "gph0-4", "gph0-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-val = <0>; + }; + + pmic_irq: pmic-irq { + samsung,pins = "gph0-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_F>; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + wifi_host_wake: wifi-host-wake { samsung,pins = "gph2-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; @@ -419,6 +649,13 @@ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; + musb_irq: musq-irq { + samsung,pins = "gph2-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + tf_detect: tf-detect { samsung,pins = "gph3-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; @@ -432,12 +669,85 @@ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; + magnetometer_i2c_pins: yas529-i2c-pins { + samsung,pins = "gpj0-0", "gpj0-1"; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + ts_irq: ts-irq { samsung,pins = "gpj0-5"; samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; + + vibrator_ena: vibrator-ena { + samsung,pins = "gpj1-1"; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + touchkey_i2c_pins: touchkey-i2c-pins { + samsung,pins = "gpj3-0", "gpj3-1"; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + touchkey_vdd_ena: touchkey-vdd-ena { + samsung,pins = "gpj3-2"; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + musb_i2c_pins: musb-i2c-pins { + samsung,pins = "gpj3-4", "gpj3-5"; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + accel_i2c_pins: accel-i2c-pins { + samsung,pins = "gpj3-6", "gpj3-7"; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + pmic_i2c_pins: pmic-i2c-pins { + samsung,pins = "gpj4-0", "gpj4-3"; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + touchkey_irq: touchkey-irq { + samsung,pins = "gpj4-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + lcd_spi_pins: spi-lcd-pins { + samsung,pins = "mp01-1", "mp04-1", "mp04-3"; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + fg_i2c_pins: fg-i2c-pins { + samsung,pins = "mp05-0", "mp05-1"; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + sound_i2c_pins: sound-i2c-pins { + samsung,pins = "mp05-2", "mp05-3"; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + panel_rst: panel-rst { + samsung,pins = "mp05-5"; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; }; &pwm { @@ -454,11 +764,16 @@ pinctrl-names = "default"; cap-sd-highspeed; cap-mmc-highspeed; + keep-power-in-suspend; mmc-pwrseq = <&wifi_pwrseq>; non-removable; status = "okay"; + assigned-clocks = <&clocks MOUT_MMC1>, <&clocks SCLK_MMC1>; + assigned-clock-rates = <0>, <50000000>; + assigned-clock-parents = <&clocks MOUT_MPLL>; + wlan@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; @@ -475,6 +790,10 @@ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &tf_detect>; pinctrl-names = "default"; status = "okay"; + + assigned-clocks = <&clocks MOUT_MMC2>, <&clocks SCLK_MMC2>; + assigned-clock-rates = <0>, <50000000>; + assigned-clock-parents = <&clocks MOUT_MPLL>; }; &uart0 { diff --git a/arch/arm/boot/dts/s5pv210-fascinate4g.dts b/arch/arm/boot/dts/s5pv210-fascinate4g.dts index 07a8d9bbe5b8..5e1b81823a8d 100644 --- a/arch/arm/boot/dts/s5pv210-fascinate4g.dts +++ b/arch/arm/boot/dts/s5pv210-fascinate4g.dts @@ -36,3 +36,252 @@ }; }; }; + +&pinctrl0 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep_cfg>; + + /* Based on vendor kernel v2.6.35.7 */ + sleep_cfg: sleep-cfg { + PIN_SLP(gpa0-0, PREV, NONE); + PIN_SLP(gpa0-1, PREV, NONE); + PIN_SLP(gpa0-2, PREV, NONE); + PIN_SLP(gpa0-3, OUT1, NONE); + PIN_SLP(gpa0-4, PREV, NONE); + PIN_SLP(gpa0-5, PREV, NONE); + PIN_SLP(gpa0-6, PREV, NONE); + PIN_SLP(gpa0-7, PREV, NONE); + + PIN_SLP(gpa1-0, INPUT, DOWN); + PIN_SLP(gpa1-1, OUT0, NONE); + PIN_SLP(gpa1-2, INPUT, DOWN); + PIN_SLP(gpa1-3, OUT0, NONE); + + PIN_SLP(gpb-0, OUT0, NONE); + PIN_SLP(gpb-1, OUT1, NONE); + PIN_SLP(gpb-2, OUT0, NONE); + PIN_SLP(gpb-3, PREV, NONE); + PIN_SLP(gpb-4, INPUT, NONE); + PIN_SLP(gpb-5, PREV, NONE); + PIN_SLP(gpb-6, INPUT, DOWN); + PIN_SLP(gpb-7, OUT0, NONE); + + PIN_SLP(gpc0-0, OUT0, NONE); + PIN_SLP(gpc0-1, INPUT, DOWN); + PIN_SLP(gpc0-2, OUT0, NONE); + PIN_SLP(gpc0-3, INPUT, DOWN); + PIN_SLP(gpc0-4, OUT0, NONE); + + PIN_SLP(gpc1-0, INPUT, DOWN); + PIN_SLP(gpc1-1, INPUT, DOWN); + PIN_SLP(gpc1-2, INPUT, DOWN); + PIN_SLP(gpc1-3, INPUT, DOWN); + PIN_SLP(gpc1-4, INPUT, DOWN); + + PIN_SLP(gpd0-0, INPUT, DOWN); + PIN_SLP(gpd0-1, OUT0, NONE); + PIN_SLP(gpd0-2, INPUT, DOWN); + PIN_SLP(gpd0-3, INPUT, DOWN); + + PIN_SLP(gpd1-0, INPUT, NONE); + PIN_SLP(gpd1-1, INPUT, NONE); + PIN_SLP(gpd1-2, INPUT, DOWN); + PIN_SLP(gpd1-3, INPUT, DOWN); + PIN_SLP(gpd1-4, INPUT, DOWN); + PIN_SLP(gpd1-5, INPUT, DOWN); + + PIN_SLP(gpe0-0, INPUT, DOWN); + PIN_SLP(gpe0-1, INPUT, DOWN); + PIN_SLP(gpe0-2, INPUT, DOWN); + PIN_SLP(gpe0-3, INPUT, DOWN); + PIN_SLP(gpe0-4, INPUT, DOWN); + PIN_SLP(gpe0-5, INPUT, DOWN); + PIN_SLP(gpe0-6, INPUT, DOWN); + PIN_SLP(gpe0-7, INPUT, DOWN); + + PIN_SLP(gpe1-0, INPUT, DOWN); + PIN_SLP(gpe1-1, INPUT, DOWN); + PIN_SLP(gpe1-2, INPUT, DOWN); + PIN_SLP(gpe1-3, OUT0, NONE); + PIN_SLP(gpe1-4, INPUT, DOWN); + + PIN_SLP(gpf0-0, OUT0, NONE); + PIN_SLP(gpf0-1, OUT0, NONE); + PIN_SLP(gpf0-2, OUT0, NONE); + PIN_SLP(gpf0-3, OUT0, NONE); + PIN_SLP(gpf0-4, OUT0, NONE); + PIN_SLP(gpf0-5, OUT0, NONE); + PIN_SLP(gpf0-6, OUT0, NONE); + PIN_SLP(gpf0-7, OUT0, NONE); + + PIN_SLP(gpf1-0, OUT0, NONE); + PIN_SLP(gpf1-1, OUT0, NONE); + PIN_SLP(gpf1-2, OUT0, NONE); + PIN_SLP(gpf1-3, OUT0, NONE); + PIN_SLP(gpf1-4, OUT0, NONE); + PIN_SLP(gpf1-5, OUT0, NONE); + PIN_SLP(gpf1-6, OUT0, NONE); + PIN_SLP(gpf1-7, OUT0, NONE); + + PIN_SLP(gpf2-0, OUT0, NONE); + PIN_SLP(gpf2-1, OUT0, NONE); + PIN_SLP(gpf2-2, OUT0, NONE); + PIN_SLP(gpf2-3, OUT0, NONE); + PIN_SLP(gpf2-4, OUT0, NONE); + PIN_SLP(gpf2-5, OUT0, NONE); + PIN_SLP(gpf2-6, OUT0, NONE); + PIN_SLP(gpf2-7, OUT0, NONE); + + PIN_SLP(gpf3-0, OUT0, NONE); + PIN_SLP(gpf3-1, OUT0, NONE); + PIN_SLP(gpf3-2, OUT0, NONE); + PIN_SLP(gpf3-3, OUT0, NONE); + PIN_SLP(gpf3-4, PREV, NONE); + PIN_SLP(gpf3-5, INPUT, DOWN); + + PIN_SLP(gpg0-0, INPUT, DOWN); + PIN_SLP(gpg0-1, INPUT, DOWN); + PIN_SLP(gpg0-2, INPUT, NONE); + PIN_SLP(gpg0-3, INPUT, DOWN); + PIN_SLP(gpg0-4, INPUT, DOWN); + PIN_SLP(gpg0-5, INPUT, DOWN); + PIN_SLP(gpg0-6, INPUT, DOWN); + + PIN_SLP(gpg1-0, OUT0, NONE); + PIN_SLP(gpg1-1, OUT1, NONE); + PIN_SLP(gpg1-2, PREV, NONE); + PIN_SLP(gpg1-3, OUT1, NONE); + PIN_SLP(gpg1-4, OUT1, NONE); + PIN_SLP(gpg1-5, OUT1, NONE); + PIN_SLP(gpg1-6, OUT1, NONE); + + PIN_SLP(gpg2-0, OUT0, NONE); + PIN_SLP(gpg2-1, OUT0, NONE); + PIN_SLP(gpg2-2, INPUT, NONE); + PIN_SLP(gpg2-3, OUT0, NONE); + PIN_SLP(gpg2-4, OUT0, NONE); + PIN_SLP(gpg2-5, OUT0, NONE); + PIN_SLP(gpg2-6, OUT0, NONE); + + PIN_SLP(gpg3-0, PREV, UP); + PIN_SLP(gpg3-1, PREV, UP); + PIN_SLP(gpg3-2, INPUT, NONE); + PIN_SLP(gpg3-3, INPUT, DOWN); + PIN_SLP(gpg3-4, OUT0, NONE); + PIN_SLP(gpg3-5, OUT0, NONE); + PIN_SLP(gpg3-6, INPUT, DOWN); + + PIN_SLP(gpi-0, PREV, NONE); + PIN_SLP(gpi-1, INPUT, DOWN); + PIN_SLP(gpi-2, PREV, NONE); + PIN_SLP(gpi-3, PREV, NONE); + PIN_SLP(gpi-4, PREV, NONE); + PIN_SLP(gpi-5, INPUT, DOWN); + PIN_SLP(gpi-6, INPUT, DOWN); + + PIN_SLP(gpj0-0, INPUT, NONE); + PIN_SLP(gpj0-1, INPUT, NONE); + PIN_SLP(gpj0-2, INPUT, NONE); + PIN_SLP(gpj0-3, INPUT, NONE); + PIN_SLP(gpj0-4, INPUT, NONE); + PIN_SLP(gpj0-5, INPUT, DOWN); + PIN_SLP(gpj0-6, OUT0, NONE); + PIN_SLP(gpj0-7, INPUT, NONE); + + PIN_SLP(gpj1-0, OUT1, NONE); + PIN_SLP(gpj1-1, OUT0, NONE); + PIN_SLP(gpj1-2, INPUT, DOWN); + PIN_SLP(gpj1-3, PREV, NONE); + PIN_SLP(gpj1-4, PREV, NONE); + PIN_SLP(gpj1-5, OUT0, NONE); + + PIN_SLP(gpj2-0, INPUT, DOWN); + PIN_SLP(gpj2-1, INPUT, DOWN); + PIN_SLP(gpj2-2, OUT0, NONE); + PIN_SLP(gpj2-3, INPUT, DOWN); + PIN_SLP(gpj2-4, INPUT, DOWN); + PIN_SLP(gpj2-5, PREV, NONE); + PIN_SLP(gpj2-6, PREV, NONE); + PIN_SLP(gpj2-7, INPUT, DOWN); + + PIN_SLP(gpj3-0, INPUT, NONE); + PIN_SLP(gpj3-1, INPUT, NONE); + PIN_SLP(gpj3-2, OUT0, NONE); + PIN_SLP(gpj3-3, INPUT, DOWN); + PIN_SLP(gpj3-4, INPUT, NONE); + PIN_SLP(gpj3-5, INPUT, NONE); + PIN_SLP(gpj3-6, INPUT, NONE); + PIN_SLP(gpj3-7, INPUT, NONE); + + PIN_SLP(gpj4-0, INPUT, NONE); + PIN_SLP(gpj4-1, INPUT, DOWN); + PIN_SLP(gpj4-2, PREV, NONE); + PIN_SLP(gpj4-3, INPUT, NONE); + PIN_SLP(gpj4-4, INPUT, DOWN); + + PIN_SLP(mp01-0, OUT1, NONE); + PIN_SLP(mp01-1, OUT0, NONE); + PIN_SLP(mp01-2, INPUT, DOWN); + PIN_SLP(mp01-3, INPUT, DOWN); + PIN_SLP(mp01-4, OUT1, NONE); + PIN_SLP(mp01-5, INPUT, DOWN); + PIN_SLP(mp01-6, INPUT, DOWN); + PIN_SLP(mp01-7, INPUT, DOWN); + + PIN_SLP(mp02-0, INPUT, DOWN); + PIN_SLP(mp02-1, INPUT, DOWN); + PIN_SLP(mp02-2, INPUT, NONE); + PIN_SLP(mp02-3, INPUT, DOWN); + + PIN_SLP(mp03-0, INPUT, DOWN); + PIN_SLP(mp03-1, INPUT, DOWN); + PIN_SLP(mp03-2, OUT1, NONE); + PIN_SLP(mp03-3, OUT0, NONE); + PIN_SLP(mp03-4, INPUT, NONE); + PIN_SLP(mp03-5, OUT0, NONE); + PIN_SLP(mp03-6, INPUT, DOWN); + PIN_SLP(mp03-7, INPUT, DOWN); + + PIN_SLP(mp04-0, INPUT, DOWN); + PIN_SLP(mp04-1, OUT0, NONE); + PIN_SLP(mp04-2, INPUT, DOWN); + PIN_SLP(mp04-3, OUT0, NONE); + PIN_SLP(mp04-4, INPUT, DOWN); + PIN_SLP(mp04-5, INPUT, DOWN); + PIN_SLP(mp04-6, OUT0, NONE); + PIN_SLP(mp04-7, INPUT, DOWN); + + PIN_SLP(mp05-0, INPUT, NONE); + PIN_SLP(mp05-1, INPUT, NONE); + PIN_SLP(mp05-2, INPUT, NONE); + PIN_SLP(mp05-3, INPUT, NONE); + PIN_SLP(mp05-4, INPUT, DOWN); + PIN_SLP(mp05-5, OUT0, NONE); + PIN_SLP(mp05-6, INPUT, DOWN); + PIN_SLP(mp05-7, PREV, NONE); + + PIN_SLP(mp06-0, INPUT, DOWN); + PIN_SLP(mp06-1, INPUT, DOWN); + PIN_SLP(mp06-2, INPUT, DOWN); + PIN_SLP(mp06-3, INPUT, DOWN); + PIN_SLP(mp06-4, INPUT, DOWN); + PIN_SLP(mp06-5, INPUT, DOWN); + PIN_SLP(mp06-6, INPUT, DOWN); + PIN_SLP(mp06-7, INPUT, DOWN); + + PIN_SLP(mp07-0, INPUT, DOWN); + PIN_SLP(mp07-1, INPUT, DOWN); + PIN_SLP(mp07-2, INPUT, DOWN); + PIN_SLP(mp07-3, INPUT, DOWN); + PIN_SLP(mp07-4, INPUT, DOWN); + PIN_SLP(mp07-5, INPUT, DOWN); + PIN_SLP(mp07-6, INPUT, DOWN); + PIN_SLP(mp07-7, INPUT, DOWN); + }; +}; + +&wm8994 { + /* GPIO3 (BCLK2) and GPIO4 (LRCLK2) as outputs */ + wlf,gpio-cfg = <0xa101 0x8100 0x8100 0x8100 0x8100 0xa101 + 0x0100 0x8100 0x0100 0x0100 0x0100>; +}; diff --git a/arch/arm/boot/dts/s5pv210-galaxys.dts b/arch/arm/boot/dts/s5pv210-galaxys.dts index cf161bbfbacf..5d10dd67eacc 100644 --- a/arch/arm/boot/dts/s5pv210-galaxys.dts +++ b/arch/arm/boot/dts/s5pv210-galaxys.dts @@ -49,15 +49,303 @@ wakeup-source; }; }; + + i2c_fmradio: i2c-gpio-8 { + compatible = "i2c-gpio"; + sda-gpios = <&gpd1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpd1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&fm_i2c_pins>; + + fmradio@10 { + compatible = "silabs,si470x"; + reg = <0x10>; + interrupt-parent = <&gpj2>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpj2 5 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&fm_irq &fm_rst>; + }; + }; +}; + +&aliases { + i2c8 = &i2c_fmradio; }; &pinctrl0 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep_cfg>; + + fm_i2c_pins: fm-i2c-pins { + samsung,pins = "gpd1-2", "gpd1-3"; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + fm_irq: fm-irq { + samsung,pins = "gpj2-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + fm_rst: fm-rst { + samsung,pins = "gpj2-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + massmemory_en: massmemory-en { samsung,pins = "gpj2-7"; samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; + + /* Based on CyanogenMod 3.0.101 kernel */ + sleep_cfg: sleep-cfg { + PIN_SLP(gpa0-0, PREV, NONE); + PIN_SLP(gpa0-1, PREV, NONE); + PIN_SLP(gpa0-2, PREV, NONE); + PIN_SLP(gpa0-3, OUT1, NONE); + PIN_SLP(gpa0-4, INPUT, DOWN); + PIN_SLP(gpa0-5, OUT0, NONE); + PIN_SLP(gpa0-6, INPUT, DOWN); + PIN_SLP(gpa0-7, OUT1, NONE); + + PIN_SLP(gpa1-0, INPUT, DOWN); + PIN_SLP(gpa1-1, OUT0, NONE); + PIN_SLP(gpa1-2, INPUT, NONE); + PIN_SLP(gpa1-3, OUT0, NONE); + + PIN_SLP(gpb-0, OUT0, NONE); + PIN_SLP(gpb-1, OUT1, NONE); + PIN_SLP(gpb-2, OUT0, NONE); + PIN_SLP(gpb-3, PREV, NONE); + PIN_SLP(gpb-4, INPUT, NONE); + PIN_SLP(gpb-5, PREV, NONE); + PIN_SLP(gpb-6, INPUT, DOWN); + PIN_SLP(gpb-7, OUT0, NONE); + + PIN_SLP(gpc0-0, OUT0, NONE); + PIN_SLP(gpc0-1, INPUT, DOWN); + PIN_SLP(gpc0-2, OUT0, NONE); + PIN_SLP(gpc0-3, INPUT, NONE); + PIN_SLP(gpc0-4, OUT0, NONE); + + PIN_SLP(gpc1-0, INPUT, DOWN); + PIN_SLP(gpc1-1, INPUT, DOWN); + PIN_SLP(gpc1-2, INPUT, DOWN); + PIN_SLP(gpc1-3, INPUT, DOWN); + PIN_SLP(gpc1-4, INPUT, DOWN); + + PIN_SLP(gpd0-0, INPUT, DOWN); + PIN_SLP(gpd0-1, OUT0, NONE); + PIN_SLP(gpd0-2, INPUT, DOWN); + PIN_SLP(gpd0-3, INPUT, DOWN); + + PIN_SLP(gpd1-0, INPUT, NONE); + PIN_SLP(gpd1-1, INPUT, NONE); + PIN_SLP(gpd1-2, INPUT, NONE); + PIN_SLP(gpd1-3, INPUT, NONE); + PIN_SLP(gpd1-4, INPUT, DOWN); + PIN_SLP(gpd1-5, INPUT, DOWN); + + PIN_SLP(gpe0-0, INPUT, DOWN); + PIN_SLP(gpe0-1, INPUT, DOWN); + PIN_SLP(gpe0-2, INPUT, DOWN); + PIN_SLP(gpe0-3, INPUT, DOWN); + PIN_SLP(gpe0-4, INPUT, DOWN); + PIN_SLP(gpe0-5, INPUT, DOWN); + PIN_SLP(gpe0-6, INPUT, DOWN); + PIN_SLP(gpe0-7, INPUT, DOWN); + + PIN_SLP(gpe1-0, INPUT, DOWN); + PIN_SLP(gpe1-1, INPUT, DOWN); + PIN_SLP(gpe1-2, INPUT, DOWN); + PIN_SLP(gpe1-3, OUT0, NONE); + PIN_SLP(gpe1-4, INPUT, DOWN); + + PIN_SLP(gpf0-0, OUT0, NONE); + PIN_SLP(gpf0-1, OUT0, NONE); + PIN_SLP(gpf0-2, OUT0, NONE); + PIN_SLP(gpf0-3, OUT0, NONE); + PIN_SLP(gpf0-4, OUT0, NONE); + PIN_SLP(gpf0-5, OUT0, NONE); + PIN_SLP(gpf0-6, OUT0, NONE); + PIN_SLP(gpf0-7, OUT0, NONE); + + PIN_SLP(gpf1-0, OUT0, NONE); + PIN_SLP(gpf1-1, OUT0, NONE); + PIN_SLP(gpf1-2, OUT0, NONE); + PIN_SLP(gpf1-3, OUT0, NONE); + PIN_SLP(gpf1-4, OUT0, NONE); + PIN_SLP(gpf1-5, OUT0, NONE); + PIN_SLP(gpf1-6, OUT0, NONE); + PIN_SLP(gpf1-7, OUT0, NONE); + + PIN_SLP(gpf2-0, OUT0, NONE); + PIN_SLP(gpf2-1, OUT0, NONE); + PIN_SLP(gpf2-2, OUT0, NONE); + PIN_SLP(gpf2-3, OUT0, NONE); + PIN_SLP(gpf2-4, OUT0, NONE); + PIN_SLP(gpf2-5, OUT0, NONE); + PIN_SLP(gpf2-6, OUT0, NONE); + PIN_SLP(gpf2-7, OUT0, NONE); + + PIN_SLP(gpf3-0, OUT0, NONE); + PIN_SLP(gpf3-1, OUT0, NONE); + PIN_SLP(gpf3-2, OUT0, NONE); + PIN_SLP(gpf3-3, OUT0, NONE); + PIN_SLP(gpf3-4, PREV, NONE); + PIN_SLP(gpf3-5, INPUT, DOWN); + + PIN_SLP(gpg0-0, OUT0, NONE); + PIN_SLP(gpg0-1, INPUT, NONE); + PIN_SLP(gpg0-2, INPUT, NONE); + PIN_SLP(gpg0-3, INPUT, NONE); + PIN_SLP(gpg0-4, INPUT, NONE); + PIN_SLP(gpg0-5, INPUT, NONE); + PIN_SLP(gpg0-6, INPUT, NONE); + + PIN_SLP(gpg1-0, OUT0, NONE); + PIN_SLP(gpg1-1, OUT1, NONE); + PIN_SLP(gpg1-2, PREV, NONE); + PIN_SLP(gpg1-3, OUT1, NONE); + PIN_SLP(gpg1-4, OUT1, NONE); + PIN_SLP(gpg1-5, OUT1, NONE); + PIN_SLP(gpg1-6, OUT1, NONE); + + PIN_SLP(gpg2-0, OUT0, NONE); + PIN_SLP(gpg2-1, OUT0, NONE); + PIN_SLP(gpg2-2, INPUT, NONE); + PIN_SLP(gpg2-3, OUT0, NONE); + PIN_SLP(gpg2-4, OUT0, NONE); + PIN_SLP(gpg2-5, OUT0, NONE); + PIN_SLP(gpg2-6, OUT0, NONE); + + PIN_SLP(gpg3-0, OUT1, NONE); + PIN_SLP(gpg3-1, OUT0, NONE); + PIN_SLP(gpg3-2, INPUT, NONE); + PIN_SLP(gpg3-3, INPUT, DOWN); + PIN_SLP(gpg3-4, OUT0, NONE); + PIN_SLP(gpg3-5, OUT0, NONE); + PIN_SLP(gpg3-6, INPUT, DOWN); + + PIN_SLP(gpi-0, PREV, NONE); + PIN_SLP(gpi-1, INPUT, DOWN); + PIN_SLP(gpi-2, PREV, NONE); + PIN_SLP(gpi-3, PREV, NONE); + PIN_SLP(gpi-4, PREV, NONE); + PIN_SLP(gpi-5, INPUT, DOWN); + PIN_SLP(gpi-6, INPUT, DOWN); + + PIN_SLP(gpj0-0, INPUT, NONE); + PIN_SLP(gpj0-1, INPUT, NONE); + PIN_SLP(gpj0-2, INPUT, NONE); + PIN_SLP(gpj0-3, INPUT, NONE); + PIN_SLP(gpj0-4, INPUT, NONE); + PIN_SLP(gpj0-5, INPUT, DOWN); + PIN_SLP(gpj0-6, OUT0, NONE); + PIN_SLP(gpj0-7, INPUT, NONE); + + PIN_SLP(gpj1-0, INPUT, DOWN); + PIN_SLP(gpj1-1, OUT0, NONE); + PIN_SLP(gpj1-2, INPUT, DOWN); + PIN_SLP(gpj1-3, PREV, NONE); + PIN_SLP(gpj1-4, PREV, NONE); + PIN_SLP(gpj1-5, OUT0, NONE); + + PIN_SLP(gpj2-0, INPUT, DOWN); + PIN_SLP(gpj2-1, INPUT, DOWN); + PIN_SLP(gpj2-2, OUT0, NONE); + PIN_SLP(gpj2-3, INPUT, DOWN); + PIN_SLP(gpj2-4, INPUT, UP); + PIN_SLP(gpj2-5, PREV, NONE); + PIN_SLP(gpj2-6, PREV, NONE); + PIN_SLP(gpj2-7, OUT1, NONE); + + PIN_SLP(gpj3-0, INPUT, NONE); + PIN_SLP(gpj3-1, INPUT, NONE); + PIN_SLP(gpj3-2, OUT0, NONE); + PIN_SLP(gpj3-3, INPUT, DOWN); + PIN_SLP(gpj3-4, INPUT, NONE); + PIN_SLP(gpj3-5, INPUT, NONE); + PIN_SLP(gpj3-6, INPUT, NONE); + PIN_SLP(gpj3-7, INPUT, NONE); + + PIN_SLP(gpj4-0, INPUT, NONE); + PIN_SLP(gpj4-1, INPUT, DOWN); + PIN_SLP(gpj4-2, PREV, NONE); + PIN_SLP(gpj4-3, INPUT, NONE); + PIN_SLP(gpj4-4, INPUT, DOWN); + + PIN_SLP(mp01-0, INPUT, DOWN); + PIN_SLP(mp01-1, OUT0, NONE); + PIN_SLP(mp01-2, INPUT, DOWN); + PIN_SLP(mp01-3, INPUT, DOWN); + PIN_SLP(mp01-4, OUT1, NONE); + PIN_SLP(mp01-5, INPUT, DOWN); + PIN_SLP(mp01-6, INPUT, DOWN); + PIN_SLP(mp01-7, INPUT, DOWN); + + PIN_SLP(mp02-0, INPUT, DOWN); + PIN_SLP(mp02-1, INPUT, DOWN); + PIN_SLP(mp02-2, INPUT, NONE); + PIN_SLP(mp02-3, INPUT, DOWN); + + PIN_SLP(mp03-0, INPUT, DOWN); + PIN_SLP(mp03-1, INPUT, DOWN); + PIN_SLP(mp03-2, OUT1, NONE); + PIN_SLP(mp03-3, OUT0, NONE); + PIN_SLP(mp03-4, INPUT, NONE); + PIN_SLP(mp03-5, OUT1, NONE); + PIN_SLP(mp03-6, INPUT, DOWN); + PIN_SLP(mp03-7, INPUT, DOWN); + + PIN_SLP(mp04-0, INPUT, DOWN); + PIN_SLP(mp04-1, OUT0, NONE); + PIN_SLP(mp04-2, INPUT, DOWN); + PIN_SLP(mp04-3, OUT0, NONE); + PIN_SLP(mp04-4, INPUT, DOWN); + PIN_SLP(mp04-5, INPUT, DOWN); + PIN_SLP(mp04-6, OUT0, NONE); + PIN_SLP(mp04-7, INPUT, DOWN); + + PIN_SLP(mp05-0, INPUT, NONE); + PIN_SLP(mp05-1, INPUT, NONE); + PIN_SLP(mp05-2, INPUT, NONE); + PIN_SLP(mp05-3, INPUT, NONE); + PIN_SLP(mp05-4, INPUT, DOWN); + PIN_SLP(mp05-5, OUT0, NONE); + PIN_SLP(mp05-6, INPUT, DOWN); + PIN_SLP(mp05-7, PREV, NONE); + + PIN_SLP(mp06-0, INPUT, DOWN); + PIN_SLP(mp06-1, INPUT, DOWN); + PIN_SLP(mp06-2, INPUT, DOWN); + PIN_SLP(mp06-3, INPUT, DOWN); + PIN_SLP(mp06-4, INPUT, DOWN); + PIN_SLP(mp06-5, INPUT, DOWN); + PIN_SLP(mp06-6, INPUT, DOWN); + PIN_SLP(mp06-7, INPUT, DOWN); + + PIN_SLP(mp07-0, INPUT, DOWN); + PIN_SLP(mp07-1, INPUT, DOWN); + PIN_SLP(mp07-2, INPUT, DOWN); + PIN_SLP(mp07-3, INPUT, DOWN); + PIN_SLP(mp07-4, INPUT, DOWN); + PIN_SLP(mp07-5, INPUT, DOWN); + PIN_SLP(mp07-6, INPUT, DOWN); + PIN_SLP(mp07-7, INPUT, DOWN); + }; }; &sdhci0 { @@ -67,4 +355,8 @@ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4>; pinctrl-names = "default"; status = "okay"; + + assigned-clocks = <&clocks MOUT_MMC0>, <&clocks SCLK_MMC0>; + assigned-clock-rates = <0>, <52000000>; + assigned-clock-parents = <&clocks MOUT_MPLL>; }; diff --git a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi index 7f0c9d447871..5e8b66281f01 100644 --- a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi +++ b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi @@ -18,6 +18,13 @@ #include <dt-bindings/pinctrl/samsung.h> +#define PIN_SLP(_pin, _mode, _pull) \ + _pin { \ + samsung,pins = #_pin; \ + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_ ##_mode>; \ + samsung,pin-pud-pdn = <S3C64XX_PIN_PULL_ ##_pull>; \ + } + &pinctrl0 { gpa0: gpa0 { gpio-controller; @@ -195,7 +202,7 @@ #interrupt-cells = <2>; }; - gpgi: gpgi { + gpi: gpi { gpio-controller; #gpio-cells = <2>; }; diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi index 2ad642f51fd9..1b0ee884e91d 100644 --- a/arch/arm/boot/dts/s5pv210.dtsi +++ b/arch/arm/boot/dts/s5pv210.dtsi @@ -159,6 +159,18 @@ }; }; + adc: adc@e1700000 { + compatible = "samsung,s5pv210-adc"; + reg = <0xe1700000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <23>, <24>; + clocks = <&clocks CLK_TSADC>; + clock-names = "adc"; + #io-channel-cells = <1>; + io-channel-ranges; + status = "disabled"; + }; + spi0: spi@e1300000 { compatible = "samsung,s5pv210-spi"; reg = <0xe1300000 0x1000>; @@ -614,7 +626,7 @@ clock-names = "fimc", "sclk_fimc"; samsung,pix-limits = <4224 8192 1920 4224>; - samsung,mainscaler-ext; + samsung,min-pix-alignment = <16 8>; samsung,cam-if; }; @@ -628,8 +640,10 @@ clock-names = "fimc", "sclk_fimc"; samsung,pix-limits = <4224 8192 1920 4224>; + samsung,min-pix-alignment = <1 1>; samsung,mainscaler-ext; samsung,cam-if; + samsung,lcd-wb; }; fimc2: fimc@fb400000 { @@ -641,9 +655,10 @@ <&clocks SCLK_FIMC2>; clock-names = "fimc", "sclk_fimc"; - samsung,pix-limits = <4224 8192 1920 4224>; - samsung,mainscaler-ext; - samsung,lcd-wb; + samsung,pix-limits = <1920 8192 1280 1920>; + samsung,min-pix-alignment = <16 8>; + samsung,rotators = <0>; + samsung,cam-if; }; }; diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index ab550d69db91..c0a3ca8f9bf7 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -21,10 +21,6 @@ aliases { serial0 = &uart1; serial1 = &uart3; - tcb0 = &tcb0; - tcb1 = &tcb1; - i2s0 = &i2s0; - i2s1 = &i2s1; }; cpus { @@ -635,6 +631,64 @@ #size-cells = <1>; ranges = <0x0 0xf8034000 0x800>; status = "disabled"; + + uart5: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; + clock-names = "usart"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(11))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(12))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + + spi2: spi@400 { + compatible = "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; + clock-names = "spi_clk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(11))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(12))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c2: i2c@600 { + compatible = "atmel,sama5d2-i2c"; + reg = <0x600 0x200>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(11))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(12))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; }; flx1: flexcom@f8038000 { @@ -645,6 +699,64 @@ #size-cells = <1>; ranges = <0x0 0xf8038000 0x800>; status = "disabled"; + + uart6: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; + clock-names = "usart"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(13))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(14))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + + spi3: spi@400 { + compatible = "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; + clock-names = "spi_clk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(13))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(14))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c3: i2c@600 { + compatible = "atmel,sama5d2-i2c"; + reg = <0x600 0x200>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(13))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(14))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; }; securam: sram@f8044000 { @@ -794,6 +906,64 @@ #size-cells = <1>; ranges = <0x0 0xfc010000 0x800>; status = "disabled"; + + uart7: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 21>; + clock-names = "usart"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(15))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(16))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + + spi4: spi@400 { + compatible = "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 21>; + clock-names = "spi_clk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(15))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(16))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c4: i2c@600 { + compatible = "atmel,sama5d2-i2c"; + reg = <0x600 0x200>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 21>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(15))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(16))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; }; flx3: flexcom@fc014000 { @@ -804,6 +974,65 @@ #size-cells = <1>; ranges = <0x0 0xfc014000 0x800>; status = "disabled"; + + uart8: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; + clock-names = "usart"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(17))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(18))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + + spi5: spi@400 { + compatible = "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; + clock-names = "spi_clk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(17))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(18))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c5: i2c@600 { + compatible = "atmel,sama5d2-i2c"; + reg = <0x600 0x200>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(17))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(18))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; flx4: flexcom@fc018000 { @@ -814,6 +1043,64 @@ #size-cells = <1>; ranges = <0x0 0xfc018000 0x800>; status = "disabled"; + + uart9: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; + clock-names = "usart"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(19))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(20))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + + spi6: spi@400 { + compatible = "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; + clock-names = "spi_clk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(19))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(20))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c6: i2c@600 { + compatible = "atmel,sama5d2-i2c"; + reg = <0x600 0x200>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(19))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(20))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; }; trng@fc01c000 { diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index f11b018e9173..c53e48445e4d 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -108,7 +108,7 @@ status = "disabled"; #address-cells = <1>; #size-cells = <0>; - clocks = <&mci0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 21>; clock-names = "mci_clk"; }; @@ -123,7 +123,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; - clocks = <&spi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 24>; clock-names = "spi_clk"; status = "disabled"; }; @@ -137,7 +137,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; - clocks = <&ssc0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; clock-names = "pclk"; status = "disabled"; }; @@ -148,7 +148,7 @@ #size-cells = <0>; reg = <0xf0010000 0x100>; interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb0_clk>, <&clk32k>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&clk32k>; clock-names = "t0_clk", "slow_clk"; }; @@ -163,10 +163,10 @@ pinctrl-0 = <&pinctrl_i2c0>; pinctrl-1 = <&pinctrl_i2c0_gpio>; sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>; - scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; #address-cells = <1>; #size-cells = <0>; - clocks = <&twi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 18>; status = "disabled"; }; @@ -181,10 +181,10 @@ pinctrl-0 = <&pinctrl_i2c1>; pinctrl-1 = <&pinctrl_i2c1_gpio>; sda-gpios = <&pioC 26 GPIO_ACTIVE_HIGH>; - scl-gpios = <&pioC 27 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioC 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; #address-cells = <1>; #size-cells = <0>; - clocks = <&twi1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; status = "disabled"; }; @@ -197,7 +197,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; - clocks = <&usart0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 12>; clock-names = "usart"; status = "disabled"; }; @@ -211,7 +211,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; - clocks = <&usart1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; clock-names = "usart"; status = "disabled"; }; @@ -222,7 +222,7 @@ interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; - clocks = <&uart0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; clock-names = "usart"; status = "disabled"; }; @@ -232,7 +232,7 @@ reg = <0xf002c000 0x300>; interrupts = <28 IRQ_TYPE_LEVEL_HIGH 4>; #pwm-cells = <3>; - clocks = <&pwm_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 28>; status = "disabled"; }; @@ -242,7 +242,7 @@ interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_isi_data_0_7>; - clocks = <&isi_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 37>; clock-names = "isi_clk"; status = "disabled"; port { @@ -267,7 +267,7 @@ status = "disabled"; #address-cells = <1>; #size-cells = <0>; - clocks = <&mci1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; clock-names = "mci_clk"; }; @@ -282,7 +282,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; - clocks = <&spi1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 25>; clock-names = "spi_clk"; status = "disabled"; }; @@ -296,7 +296,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; - clocks = <&ssc1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 39>; clock-names = "pclk"; status = "disabled"; }; @@ -323,7 +323,7 @@ &pinctrl_adc0_ad10 &pinctrl_adc0_ad11 >; - clocks = <&adc_clk>, + clocks = <&pmc PMC_TYPE_PERIPHERAL 29>, <&adc_op_clk>; clock-names = "adc_clk", "adc_op_clk"; atmel,adc-channels-used = <0xfff>; @@ -367,10 +367,10 @@ pinctrl-0 = <&pinctrl_i2c2>; pinctrl-1 = <&pinctrl_i2c2_gpio>; sda-gpios = <&pioA 18 GPIO_ACTIVE_HIGH>; - scl-gpios = <&pioA 19 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; #address-cells = <1>; #size-cells = <0>; - clocks = <&twi2_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; status = "disabled"; }; @@ -383,7 +383,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; - clocks = <&usart2_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; clock-names = "usart"; status = "disabled"; }; @@ -397,7 +397,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; - clocks = <&usart3_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; clock-names = "usart"; status = "disabled"; }; @@ -408,7 +408,7 @@ interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(17)>; dma-names = "tx"; - clocks = <&sha_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 42>; clock-names = "sha_clk"; }; @@ -419,7 +419,7 @@ dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(18)>, <&dma1 2 AT91_DMA_CFG_PER_ID(19)>; dma-names = "tx", "rx"; - clocks = <&aes_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 43>; clock-names = "aes_clk"; }; @@ -430,7 +430,7 @@ dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(20)>, <&dma1 2 AT91_DMA_CFG_PER_ID(21)>; dma-names = "tx", "rx"; - clocks = <&tdes_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 44>; clock-names = "tdes_clk"; }; @@ -438,14 +438,14 @@ compatible = "atmel,at91sam9g45-trng"; reg = <0xf8040000 0x100>; interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&trng_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 45>; }; hsmc: hsmc@ffffc000 { compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd"; reg = <0xffffc000 0x1000>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>; - clocks = <&hsmc_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -462,7 +462,7 @@ reg = <0xffffe600 0x200>; interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; - clocks = <&dma0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 30>; clock-names = "dma_clk"; }; @@ -471,14 +471,14 @@ reg = <0xffffe800 0x200>; interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; - clocks = <&dma1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 31>; clock-names = "dma_clk"; }; ramc0: ramc@ffffea00 { compatible = "atmel,sama5d3-ddramc"; reg = <0xffffea00 0x200>; - clocks = <&ddrck>, <&mpddr_clk>; + clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 49>; clock-names = "ddrck", "mpddr"; }; @@ -491,7 +491,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; - clocks = <&dbgu_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; clock-names = "usart"; status = "disabled"; }; @@ -967,7 +967,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioA_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; }; pioB: gpio@fffff400 { @@ -978,7 +978,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioB_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; }; pioC: gpio@fffff600 { @@ -989,7 +989,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioC_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; }; pioD: gpio@fffff800 { @@ -1000,7 +1000,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioD_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; }; pioE: gpio@fffffa00 { @@ -1011,7 +1011,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioE_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; }; }; @@ -1019,353 +1019,9 @@ compatible = "atmel,sama5d3-pmc", "syscon"; reg = <0xfffffc00 0x120>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - - main_rc_osc: main_rc_osc { - compatible = "atmel,at91sam9x5-clk-main-rc-osc"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = <AT91_PMC_MOSCRCS>; - clock-frequency = <12000000>; - clock-accuracy = <50000000>; - }; - - main_osc: main_osc { - compatible = "atmel,at91rm9200-clk-main-osc"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = <AT91_PMC_MOSCS>; - clocks = <&main_xtal>; - }; - - main: mainck { - compatible = "atmel,at91sam9x5-clk-main"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = <AT91_PMC_MOSCSELS>; - clocks = <&main_rc_osc &main_osc>; - }; - - plla: pllack { - compatible = "atmel,sama5d3-clk-pll"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = <AT91_PMC_LOCKA>; - clocks = <&main>; - reg = <0>; - atmel,clk-input-range = <8000000 50000000>; - #atmel,pll-clk-output-range-cells = <4>; - atmel,pll-clk-output-ranges = <400000000 1000000000 0 0>; - }; - - plladiv: plladivck { - compatible = "atmel,at91sam9x5-clk-plldiv"; - #clock-cells = <0>; - clocks = <&plla>; - }; - - utmi: utmick { - compatible = "atmel,at91sam9x5-clk-utmi"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = <AT91_PMC_LOCKU>; - clocks = <&main>; - }; - - mck: masterck { - compatible = "atmel,at91sam9x5-clk-master"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = <AT91_PMC_MCKRDY>; - clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>; - atmel,clk-output-range = <0 166000000>; - atmel,clk-divisors = <1 2 4 3>; - }; - - usb: usbck { - compatible = "atmel,at91sam9x5-clk-usb"; - #clock-cells = <0>; - clocks = <&plladiv>, <&utmi>; - }; - - prog: progck { - compatible = "atmel,at91sam9x5-clk-programmable"; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&pmc>; - clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>; - - prog0: prog0 { - #clock-cells = <0>; - reg = <0>; - interrupts = <AT91_PMC_PCKRDY(0)>; - }; - - prog1: prog1 { - #clock-cells = <0>; - reg = <1>; - interrupts = <AT91_PMC_PCKRDY(1)>; - }; - - prog2: prog2 { - #clock-cells = <0>; - reg = <2>; - interrupts = <AT91_PMC_PCKRDY(2)>; - }; - }; - - smd: smdclk { - compatible = "atmel,at91sam9x5-clk-smd"; - #clock-cells = <0>; - clocks = <&plladiv>, <&utmi>; - }; - - systemck { - compatible = "atmel,at91rm9200-clk-system"; - #address-cells = <1>; - #size-cells = <0>; - - ddrck: ddrck { - #clock-cells = <0>; - reg = <2>; - clocks = <&mck>; - }; - - smdck: smdck { - #clock-cells = <0>; - reg = <4>; - clocks = <&smd>; - }; - - uhpck: uhpck { - #clock-cells = <0>; - reg = <6>; - clocks = <&usb>; - }; - - udpck: udpck { - #clock-cells = <0>; - reg = <7>; - clocks = <&usb>; - }; - - pck0: pck0 { - #clock-cells = <0>; - reg = <8>; - clocks = <&prog0>; - }; - - pck1: pck1 { - #clock-cells = <0>; - reg = <9>; - clocks = <&prog1>; - }; - - pck2: pck2 { - #clock-cells = <0>; - reg = <10>; - clocks = <&prog2>; - }; - }; - - periphck { - compatible = "atmel,at91sam9x5-clk-peripheral"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&mck>; - - dbgu_clk: dbgu_clk { - #clock-cells = <0>; - reg = <2>; - }; - - hsmc_clk: hsmc_clk { - #clock-cells = <0>; - reg = <5>; - }; - - pioA_clk: pioA_clk { - #clock-cells = <0>; - reg = <6>; - }; - - pioB_clk: pioB_clk { - #clock-cells = <0>; - reg = <7>; - }; - - pioC_clk: pioC_clk { - #clock-cells = <0>; - reg = <8>; - }; - - pioD_clk: pioD_clk { - #clock-cells = <0>; - reg = <9>; - }; - - pioE_clk: pioE_clk { - #clock-cells = <0>; - reg = <10>; - }; - - usart0_clk: usart0_clk { - #clock-cells = <0>; - reg = <12>; - atmel,clk-output-range = <0 83000000>; - }; - - usart1_clk: usart1_clk { - #clock-cells = <0>; - reg = <13>; - atmel,clk-output-range = <0 83000000>; - }; - - usart2_clk: usart2_clk { - #clock-cells = <0>; - reg = <14>; - atmel,clk-output-range = <0 83000000>; - }; - - usart3_clk: usart3_clk { - #clock-cells = <0>; - reg = <15>; - atmel,clk-output-range = <0 83000000>; - }; - - uart0_clk: uart0_clk { - #clock-cells = <0>; - reg = <16>; - atmel,clk-output-range = <0 83000000>; - }; - - twi0_clk: twi0_clk { - reg = <18>; - #clock-cells = <0>; - atmel,clk-output-range = <0 41500000>; - }; - - twi1_clk: twi1_clk { - #clock-cells = <0>; - reg = <19>; - atmel,clk-output-range = <0 41500000>; - }; - - twi2_clk: twi2_clk { - #clock-cells = <0>; - reg = <20>; - atmel,clk-output-range = <0 41500000>; - }; - - mci0_clk: mci0_clk { - #clock-cells = <0>; - reg = <21>; - }; - - mci1_clk: mci1_clk { - #clock-cells = <0>; - reg = <22>; - }; - - spi0_clk: spi0_clk { - #clock-cells = <0>; - reg = <24>; - atmel,clk-output-range = <0 166000000>; - }; - - spi1_clk: spi1_clk { - #clock-cells = <0>; - reg = <25>; - atmel,clk-output-range = <0 166000000>; - }; - - tcb0_clk: tcb0_clk { - #clock-cells = <0>; - reg = <26>; - atmel,clk-output-range = <0 166000000>; - }; - - pwm_clk: pwm_clk { - #clock-cells = <0>; - reg = <28>; - }; - - adc_clk: adc_clk { - #clock-cells = <0>; - reg = <29>; - atmel,clk-output-range = <0 83000000>; - }; - - dma0_clk: dma0_clk { - #clock-cells = <0>; - reg = <30>; - }; - - dma1_clk: dma1_clk { - #clock-cells = <0>; - reg = <31>; - }; - - uhphs_clk: uhphs_clk { - #clock-cells = <0>; - reg = <32>; - }; - - udphs_clk: udphs_clk { - #clock-cells = <0>; - reg = <33>; - }; - - isi_clk: isi_clk { - #clock-cells = <0>; - reg = <37>; - }; - - ssc0_clk: ssc0_clk { - #clock-cells = <0>; - reg = <38>; - atmel,clk-output-range = <0 83000000>; - }; - - ssc1_clk: ssc1_clk { - #clock-cells = <0>; - reg = <39>; - atmel,clk-output-range = <0 83000000>; - }; - - sha_clk: sha_clk { - #clock-cells = <0>; - reg = <42>; - }; - - aes_clk: aes_clk { - #clock-cells = <0>; - reg = <43>; - }; - - tdes_clk: tdes_clk { - #clock-cells = <0>; - reg = <44>; - }; - - trng_clk: trng_clk { - #clock-cells = <0>; - reg = <45>; - }; - - fuse_clk: fuse_clk { - #clock-cells = <0>; - reg = <48>; - }; - - mpddr_clk: mpddr_clk { - #clock-cells = <0>; - reg = <49>; - }; - }; + #clock-cells = <2>; + clocks = <&clk32k>, <&main_xtal>; + clock-names = "slow_clk", "main_xtal"; }; reset_controller: rstc@fffffe00 { @@ -1384,7 +1040,7 @@ compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; }; watchdog: watchdog@fffffe40 { @@ -1426,7 +1082,7 @@ reg = <0x00500000 0x100000 0xf8030000 0x4000>; interrupts = <33 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&udphs_clk>, <&utmi>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 33>, <&pmc PMC_TYPE_CORE PMC_UTMI>; clock-names = "pclk", "hclk"; status = "disabled"; @@ -1540,7 +1196,7 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_SYSTEM 6>; clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; @@ -1549,7 +1205,7 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&utmi>, <&uhphs_clk>; + clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 32>; clock-names = "usb_clk", "ehci_clk"; status = "disabled"; }; @@ -1565,7 +1221,7 @@ 0x1 0x0 0x40000000 0x10000000 0x2 0x0 0x50000000 0x10000000 0x3 0x0 0x60000000 0x10000000>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; status = "disabled"; nand_controller: nand-controller { diff --git a/arch/arm/boot/dts/sama5d3_can.dtsi b/arch/arm/boot/dts/sama5d3_can.dtsi index 2470dd3fff25..9ac29bf3f933 100644 --- a/arch/arm/boot/dts/sama5d3_can.dtsi +++ b/arch/arm/boot/dts/sama5d3_can.dtsi @@ -31,29 +31,13 @@ }; - pmc: pmc@fffffc00 { - periphck { - can0_clk: can0_clk { - #clock-cells = <0>; - reg = <40>; - atmel,clk-output-range = <0 83000000>; - }; - - can1_clk: can1_clk { - #clock-cells = <0>; - reg = <41>; - atmel,clk-output-range = <0 83000000>; - }; - }; - }; - can0: can@f000c000 { compatible = "atmel,at91sam9x5-can"; reg = <0xf000c000 0x300>; interrupts = <40 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can0_rx_tx>; - clocks = <&can0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 40>; clock-names = "can_clk"; status = "disabled"; }; @@ -64,7 +48,7 @@ interrupts = <41 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can1_rx_tx>; - clocks = <&can1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 41>; clock-names = "can_clk"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sama5d3_emac.dtsi b/arch/arm/boot/dts/sama5d3_emac.dtsi index 9aef414bcd2e..45226108850d 100644 --- a/arch/arm/boot/dts/sama5d3_emac.dtsi +++ b/arch/arm/boot/dts/sama5d3_emac.dtsi @@ -31,12 +31,6 @@ }; pmc: pmc@fffffc00 { - periphck { - macb1_clk: macb1_clk { - #clock-cells = <0>; - reg = <35>; - }; - }; }; macb1: ethernet@f802c000 { @@ -45,7 +39,7 @@ interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb1_rmii>; - clocks = <&macb1_clk>, <&macb1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_PERIPHERAL 35>; clock-names = "hclk", "pclk"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sama5d3_gmac.dtsi b/arch/arm/boot/dts/sama5d3_gmac.dtsi index 3667765a138b..884df7a54dbb 100644 --- a/arch/arm/boot/dts/sama5d3_gmac.dtsi +++ b/arch/arm/boot/dts/sama5d3_gmac.dtsi @@ -63,22 +63,13 @@ }; }; - pmc: pmc@fffffc00 { - periphck { - macb0_clk: macb0_clk { - #clock-cells = <0>; - reg = <34>; - }; - }; - }; - macb0: ethernet@f0028000 { compatible = "atmel,sama5d3-gem"; reg = <0xf0028000 0x100>; interrupts = <34 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>; - clocks = <&macb0_clk>, <&macb0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&pmc PMC_TYPE_PERIPHERAL 34>; clock-names = "hclk", "pclk"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sama5d3_lcd.dtsi b/arch/arm/boot/dts/sama5d3_lcd.dtsi index 2cf046cd4e99..308d2fc276d6 100644 --- a/arch/arm/boot/dts/sama5d3_lcd.dtsi +++ b/arch/arm/boot/dts/sama5d3_lcd.dtsi @@ -16,7 +16,7 @@ compatible = "atmel,sama5d3-hlcdc"; reg = <0xf0030000 0x2000>; interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 36>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>; clock-names = "periph_clk","sys_clk", "slow_clk"; status = "disabled"; @@ -192,23 +192,6 @@ }; }; }; - - pmc: pmc@fffffc00 { - periphck { - lcdc_clk: lcdc_clk { - #clock-cells = <0>; - reg = <36>; - }; - }; - - systemck { - lcdck: lcdck { - #clock-cells = <0>; - reg = <3>; - clocks = <&mck>; - }; - }; - }; }; }; }; diff --git a/arch/arm/boot/dts/sama5d3_mci2.dtsi b/arch/arm/boot/dts/sama5d3_mci2.dtsi index 3c83c1c36ac8..7141ee97ec3e 100644 --- a/arch/arm/boot/dts/sama5d3_mci2.dtsi +++ b/arch/arm/boot/dts/sama5d3_mci2.dtsi @@ -30,15 +30,6 @@ }; }; - pmc: pmc@fffffc00 { - periphck { - mci2_clk: mci2_clk { - #clock-cells = <0>; - reg = <23>; - }; - }; - }; - mmc2: mmc@f8004000 { compatible = "atmel,hsmci"; reg = <0xf8004000 0x600>; @@ -47,7 +38,7 @@ dma-names = "rxtx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>; - clocks = <&mci2_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; clock-names = "mci_clk"; status = "disabled"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi index 215802b8db30..2b18c5c2cc03 100644 --- a/arch/arm/boot/dts/sama5d3_tcb1.dtsi +++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi @@ -17,23 +17,13 @@ ahb { apb { - pmc: pmc@fffffc00 { - periphck { - tcb1_clk: tcb1_clk { - #clock-cells = <0>; - reg = <27>; - atmel,clk-output-range = <0 166000000>; - }; - }; - }; - tcb1: timer@f8014000 { compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon"; #address-cells = <1>; #size-cells = <0>; reg = <0xf8014000 0x100>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb1_clk>, <&clk32k>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&clk32k>; clock-names = "t0_clk", "slow_clk"; }; }; diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi index cb62adbd28ed..a3eaba995cf4 100644 --- a/arch/arm/boot/dts/sama5d3_uart.dtsi +++ b/arch/arm/boot/dts/sama5d3_uart.dtsi @@ -36,29 +36,13 @@ }; }; - pmc: pmc@fffffc00 { - periphck { - uart0_clk: uart0_clk { - #clock-cells = <0>; - reg = <16>; - atmel,clk-output-range = <0 83000000>; - }; - - uart1_clk: uart1_clk { - #clock-cells = <0>; - reg = <17>; - atmel,clk-output-range = <0 83000000>; - }; - }; - }; - uart0: serial@f0024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf0024000 0x100>; interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; - clocks = <&uart0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; clock-names = "usart"; status = "disabled"; }; @@ -69,7 +53,7 @@ interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - clocks = <&uart1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 17>; clock-names = "usart"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi index 35031bbc7e70..a499de8a7a64 100644 --- a/arch/arm/boot/dts/sama5d3xmb.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi @@ -46,7 +46,7 @@ wm8904: wm8904@1a { compatible = "wlf,wm8904"; reg = <0x1a>; - clocks = <&pck0>; + clocks = <&pmc PMC_TYPE_SYSTEM 8>; clock-names = "mclk"; }; }; @@ -60,9 +60,9 @@ resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>; pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>; /* use pck1 for the master clock of ov2640 */ - clocks = <&pck1>; + clocks = <&pmc PMC_TYPE_SYSTEM 9>; clock-names = "xvclk"; - assigned-clocks = <&pck1>; + assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>; assigned-clock-rates = <25000000>; port { diff --git a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi b/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi index 8a6916a69da4..fa9e5e2a745d 100644 --- a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi @@ -45,7 +45,7 @@ wm8904: wm8904@1a { compatible = "wlf,wm8904"; reg = <0x1a>; - clocks = <&pck0>; + clocks = <&pmc PMC_TYPE_SYSTEM 8>; clock-names = "mclk"; }; }; @@ -59,9 +59,9 @@ resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>; pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>; /* use pck1 for the master clock of ov2640 */ - clocks = <&pck1>; + clocks = <&pmc PMC_TYPE_SYSTEM 9>; clock-names = "xvclk"; - assigned-clocks = <&pck1>; + assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>; assigned-clock-rates = <25000000>; port { diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index c9c0316b5b0e..fff679734c9c 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -462,7 +462,7 @@ pinctrl-0 = <&pinctrl_i2c0>; pinctrl-1 = <&pinctrl_i2c0_gpio>; sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>; - scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 32>; @@ -484,7 +484,7 @@ pinctrl-0 = <&pinctrl_i2c1>; pinctrl-1 = <&pinctrl_i2c1_gpio>; sda-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>; - scl-gpios = <&pioE 30 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioE 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; @@ -529,7 +529,7 @@ pinctrl-0 = <&pinctrl_i2c2>; pinctrl-1 = <&pinctrl_i2c2_gpio>; sda-gpios = <&pioB 29 GPIO_ACTIVE_HIGH>; - scl-gpios = <&pioB 30 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioB 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 34>; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index c134154bcce8..01fd06328420 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -99,7 +99,7 @@ }; cmt1: timer@e6138000 { - compatible = "renesas,cmt-48-sh73a0", "renesas,cmt-48"; + compatible = "renesas,sh73a0-cmt1"; reg = <0xe6138000 0x200>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks SH73A0_CLK_CMT1>; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 4f3993cc0227..c2b54af417a2 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -531,6 +531,7 @@ reg = <0xff400000 0x100000>; resets = <&rst LWHPS2FPGA_RESET>; clocks = <&l4_main_clk>; + status = "disabled"; }; fpga_bridge1: fpga_bridge@ff500000 { @@ -538,6 +539,21 @@ reg = <0xff500000 0x10000>; resets = <&rst HPS2FPGA_RESET>; clocks = <&l4_main_clk>; + status = "disabled"; + }; + + fpga_bridge2: fpga-bridge@ff600000 { + compatible = "altr,socfpga-fpga2hps-bridge"; + reg = <0xff600000 0x100000>; + resets = <&rst FPGA2HPS_RESET>; + clocks = <&l4_main_clk>; + status = "disabled"; + }; + + fpga_bridge3: fpga-bridge@ffc25080 { + compatible = "altr,socfpga-fpga2sdram-bridge"; + reg = <0xffc25080 0x4>; + status = "disabled"; }; fpgamgr0: fpgamgr@ff706000 { diff --git a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts index 313f0ab16866..5b499c0b2745 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts @@ -24,6 +24,26 @@ stdout-path = &serial2; }; + i2c-gpio-1 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio4 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio4 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c_gpio_1_default>; + + #address-cells = <1>; + #size-cells = <0>; + + magnetometer@c { + compatible = "alps,hscdtd008a"; + reg = <0x0c>; + + avdd-supply = <&ab8500_ldo_aux1_reg>; + dvdd-supply = <&ab8500_ldo_aux8_reg>; + }; + }; + soc { /* External Micro SD card slot */ sdi0_per1@80126000 { @@ -146,6 +166,32 @@ pinctrl-1 = <&u2rxtx_c_1_sleep>; }; + i2c@80004000 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c0_a_1_default>; + pinctrl-1 = <&i2c0_a_1_sleep>; + + proximity@44 { + compatible = "sharp,gp2ap002s00f"; + reg = <0x44>; + + /* GPIO146 (PS_INT) */ + interrupt-parent = <&gpio4>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <&ab8500_ldo_aux1_reg>; + vio-supply = <&ab8500_ldo_aux8_reg>; + + pinctrl-names = "default"; + pinctrl-0 = <&proximity_default>; + + sharp,proximity-far-hysteresis = <0x40>; + sharp,proximity-close-hysteresis = <0x0f>; + }; + }; + i2c@80128000 { status = "okay"; @@ -357,6 +403,16 @@ }; }; + i2c-gpio-1 { + i2c_gpio_1_default: i2c_gpio_1 { + golden_cfg1 { + pins = "GPIO151", /* COMP_SCL */ + "GPIO152"; /* COMP_SDA */ + ste,config = <&gpio_in_nopull>; + }; + }; + }; + sdi0 { sd_level_translator_default: sd_level_translator_default { golden_cfg1 { @@ -375,6 +431,15 @@ }; }; + proximity { + proximity_default: proximity_default { + golden_cfg1 { + pins = "GPIO146_D13"; /* PS_INT */ + ste,config = <&gpio_in_nopull>; + }; + }; + }; + imu { imu_default: imu_default { golden_cfg1 { diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts index 292ed5286652..8edef161613a 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts @@ -140,7 +140,12 @@ pinctrl-0 = <&i2c_gpio_1_default>; #address-cells = <1>; #size-cells = <0>; - /* TODO: this should be used by the ALPS HSCDTD008A compass sensor */ + magnetometer@c { + compatible = "alps,hscdtd008a"; + reg = <0x0c>; + avdd-supply = <&ab8500_ldo_aux1_reg>; + dvdd-supply = <&ab8500_ldo_aux8_reg>; + }; }; soc { @@ -362,7 +367,28 @@ pinctrl-0 = <&i2c3_c_2_default>; pinctrl-1 = <&i2c3_c_2_sleep>; - /* TODO: this should be used by the Cypress TMA140 touchscreen */ + /* Cypress CY8CTMA140 touchscreen */ + touchscreen@20 { + compatible = "cypress,cy8ctma140"; + clock-frequency = <400000>; + reg = <0x20>; + + touchscreen-size-x = <480>; + touchscreen-size-y = <800>; + touchscreen-max-pressure = <255>; + + /* GPIO218 for IRQ */ + interrupt-parent = <&gpio6>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + + /* VDD is "digital supply" nominally 1.71-3.6V */ + vdd-supply = <&ab8500_ldo_aux2_reg>; + /* VCPIN is "analog supply", 2.7-3.6 V */ + vcpin-supply = <&ab8500_ldo_aux2_reg>; + + pinctrl-names = "default"; + pinctrl-0 = <&tma140_skomer_default>; + }; }; mcde@a0350000 { @@ -557,6 +583,15 @@ }; }; }; + /* Interrupt line for the Cypress TMA140 touchscreen */ + touchscreen { + tma140_skomer_default: tma140_skomer { + skomer_cfg1 { + pins = "GPIO218_AH11"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; }; &ab8505_gpio { diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index 7c36c37260a4..23a1746f3baa 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -767,20 +767,6 @@ <&clk_s_c0_flexgen CLK_ETH_PHY>; }; - rng10: rng@8a89000 { - compatible = "st,rng"; - reg = <0x08a89000 0x1000>; - clocks = <&clk_sysin>; - status = "okay"; - }; - - rng11: rng@8a8a000 { - compatible = "st,rng"; - reg = <0x08a8a000 0x1000>; - clocks = <&clk_sysin>; - status = "okay"; - }; - mailbox0: mailbox@8f00000 { compatible = "st,stih407-mailbox"; reg = <0x8f00000 0x1000>; diff --git a/arch/arm/boot/dts/stih418.dtsi b/arch/arm/boot/dts/stih418.dtsi index 83411322bd92..a05e2278b448 100644 --- a/arch/arm/boot/dts/stih418.dtsi +++ b/arch/arm/boot/dts/stih418.dtsi @@ -50,7 +50,7 @@ ohci0: usb@9a03c00 { compatible = "st,st-ohci-300x"; reg = <0x9a03c00 0x100>; - interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>, <&softreset STIH407_USB2_PORT0_SOFTRESET>; @@ -62,7 +62,7 @@ ehci0: usb@9a03e00 { compatible = "st,st-ehci-300x"; reg = <0x9a03e00 0x100>; - interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0>; clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; @@ -76,7 +76,7 @@ ohci1: usb@9a83c00 { compatible = "st,st-ohci-300x"; reg = <0x9a83c00 0x100>; - interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>, <&softreset STIH407_USB2_PORT1_SOFTRESET>; @@ -88,7 +88,7 @@ ehci1: usb@9a83e00 { compatible = "st,st-ehci-300x"; reg = <0x9a83e00 0x100>; - interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb1>; clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index d7770699feb5..393f43c85a3c 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -414,14 +414,14 @@ dac1: dac@1 { compatible = "st,stm32-dac"; - #io-channels-cells = <1>; + #io-channel-cells = <1>; reg = <1>; status = "disabled"; }; dac2: dac@2 { compatible = "st,stm32-dac"; - #io-channels-cells = <1>; + #io-channel-cells = <1>; reg = <2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi index 05eb02e6d083..9b7fc68380e9 100644 --- a/arch/arm/boot/dts/stm32h743.dtsi +++ b/arch/arm/boot/dts/stm32h743.dtsi @@ -180,14 +180,14 @@ dac1: dac@1 { compatible = "st,stm32-dac"; - #io-channels-cells = <1>; + #io-channel-cells = <1>; reg = <1>; status = "disabled"; }; dac2: dac@2 { compatible = "st,stm32-dac"; - #io-channels-cells = <1>; + #io-channel-cells = <1>; reg = <2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi index 73c07f0dfad2..7eb858732d6d 100644 --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi @@ -6,7 +6,7 @@ #include <dt-bindings/pinctrl/stm32-pinfunc.h> &pinctrl { - adc1_in6_pins_a: adc1-in6 { + adc1_in6_pins_a: adc1-in6-0 { pins { pinmux = <STM32_PINMUX('F', 12, ANALOG)>; }; @@ -21,6 +21,13 @@ }; }; + adc12_ain_pins_b: adc12-ain-1 { + pins { + pinmux = <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1 in6 */ + <STM32_PINMUX('F', 13, ANALOG)>; /* ADC2 in2 */ + }; + }; + adc12_usb_cc_pins_a: adc12-usb-cc-pins-0 { pins { pinmux = <STM32_PINMUX('A', 4, ANALOG)>, /* ADC12 in18 */ @@ -37,7 +44,7 @@ }; }; - cec_pins_sleep_a: cec-sleep-0 { + cec_sleep_pins_a: cec-sleep-0 { pins { pinmux = <STM32_PINMUX('A', 15, ANALOG)>; /* HDMI_CEC */ }; @@ -52,19 +59,19 @@ }; }; - cec_pins_sleep_b: cec-sleep-1 { + cec_sleep_pins_b: cec-sleep-1 { pins { pinmux = <STM32_PINMUX('B', 6, ANALOG)>; /* HDMI_CEC */ }; }; - dac_ch1_pins_a: dac-ch1 { + dac_ch1_pins_a: dac-ch1-0 { pins { pinmux = <STM32_PINMUX('A', 4, ANALOG)>; }; }; - dac_ch2_pins_a: dac-ch2 { + dac_ch2_pins_a: dac-ch2-0 { pins { pinmux = <STM32_PINMUX('A', 5, ANALOG)>; }; @@ -142,7 +149,7 @@ }; }; - ethernet0_rgmii_pins_sleep_a: rgmii-sleep-0 { + ethernet0_rgmii_sleep_pins_a: rgmii-sleep-0 { pins1 { pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */ <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */ @@ -162,6 +169,108 @@ }; }; + ethernet0_rgmii_pins_b: rgmii-1 { + pins1 { + pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */ + <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + pins2 { + pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('H', 6, AF11)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('H', 7, AF11)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */ + <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */ + bias-disable; + }; + }; + + ethernet0_rgmii_sleep_pins_b: rgmii-sleep-1 { + pins1 { + pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */ + <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */ + <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('H', 7, ANALOG)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */ + <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */ + }; + }; + + ethernet0_rgmii_pins_c: rgmii-2 { + pins1 { + pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */ + <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('B', 12, AF11)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('G', 11, AF11)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + pins2 { + pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('H', 6, AF11)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */ + <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */ + bias-disable; + }; + }; + + ethernet0_rgmii_sleep_pins_c: rgmii-sleep-2 { + pins1 { + pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */ + <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('B', 12, ANALOG)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('G', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */ + <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */ + <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */ + }; + }; + ethernet0_rmii_pins_a: rmii-0 { pins1 { pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH1_RMII_TXD0 */ @@ -182,7 +291,7 @@ }; }; - ethernet0_rmii_pins_sleep_a: rmii-sleep-0 { + ethernet0_rmii_sleep_pins_a: rmii-sleep-0 { pins1 { pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH1_RMII_TXD0 */ <STM32_PINMUX('G', 14, ANALOG)>, /* ETH1_RMII_TXD1 */ @@ -250,14 +359,14 @@ }; }; - i2c1_pins_sleep_a: i2c1-1 { + i2c1_sleep_pins_a: i2c1-sleep-0 { pins { pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */ <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */ }; }; - i2c1_pins_b: i2c1-2 { + i2c1_pins_b: i2c1-1 { pins { pinmux = <STM32_PINMUX('F', 14, AF5)>, /* I2C1_SCL */ <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */ @@ -267,7 +376,7 @@ }; }; - i2c1_pins_sleep_b: i2c1-3 { + i2c1_sleep_pins_b: i2c1-sleep-1 { pins { pinmux = <STM32_PINMUX('F', 14, ANALOG)>, /* I2C1_SCL */ <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */ @@ -284,14 +393,14 @@ }; }; - i2c2_pins_sleep_a: i2c2-1 { + i2c2_sleep_pins_a: i2c2-sleep-0 { pins { pinmux = <STM32_PINMUX('H', 4, ANALOG)>, /* I2C2_SCL */ <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */ }; }; - i2c2_pins_b1: i2c2-2 { + i2c2_pins_b1: i2c2-1 { pins { pinmux = <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */ bias-disable; @@ -300,12 +409,29 @@ }; }; - i2c2_pins_sleep_b1: i2c2-3 { + i2c2_sleep_pins_b1: i2c2-sleep-1 { pins { pinmux = <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */ }; }; + i2c2_pins_c: i2c2-2 { + pins { + pinmux = <STM32_PINMUX('F', 1, AF4)>, /* I2C2_SCL */ + <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c2_pins_sleep_c: i2c2-sleep-2 { + pins { + pinmux = <STM32_PINMUX('F', 1, ANALOG)>, /* I2C2_SCL */ + <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */ + }; + }; + i2c5_pins_a: i2c5-0 { pins { pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */ @@ -316,7 +442,7 @@ }; }; - i2c5_pins_sleep_a: i2c5-1 { + i2c5_sleep_pins_a: i2c5-sleep-0 { pins { pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* I2C5_SCL */ <STM32_PINMUX('A', 12, ANALOG)>; /* I2C5_SDA */ @@ -324,6 +450,23 @@ }; }; + i2c5_pins_b: i2c5-1 { + pins { + pinmux = <STM32_PINMUX('D', 0, AF4)>, /* I2C5_SCL */ + <STM32_PINMUX('D', 1, AF4)>; /* I2C5_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c5_sleep_pins_b: i2c5-sleep-1 { + pins { + pinmux = <STM32_PINMUX('D', 0, ANALOG)>, /* I2C5_SCL */ + <STM32_PINMUX('D', 1, ANALOG)>; /* I2C5_SDA */ + }; + }; + i2s2_pins_a: i2s2-0 { pins { pinmux = <STM32_PINMUX('I', 3, AF5)>, /* I2S2_SDO */ @@ -335,7 +478,7 @@ }; }; - i2s2_pins_sleep_a: i2s2-1 { + i2s2_sleep_pins_a: i2s2-sleep-0 { pins { pinmux = <STM32_PINMUX('I', 3, ANALOG)>, /* I2S2_SDO */ <STM32_PINMUX('B', 9, ANALOG)>, /* I2S2_WS */ @@ -343,7 +486,7 @@ }; }; - ltdc_pins_a: ltdc-a-0 { + ltdc_pins_a: ltdc-0 { pins { pinmux = <STM32_PINMUX('G', 7, AF14)>, /* LCD_CLK */ <STM32_PINMUX('I', 10, AF14)>, /* LCD_HSYNC */ @@ -379,7 +522,7 @@ }; }; - ltdc_pins_sleep_a: ltdc-a-1 { + ltdc_sleep_pins_a: ltdc-sleep-0 { pins { pinmux = <STM32_PINMUX('G', 7, ANALOG)>, /* LCD_CLK */ <STM32_PINMUX('I', 10, ANALOG)>, /* LCD_HSYNC */ @@ -412,7 +555,7 @@ }; }; - ltdc_pins_b: ltdc-b-0 { + ltdc_pins_b: ltdc-1 { pins { pinmux = <STM32_PINMUX('I', 14, AF14)>, /* LCD_CLK */ <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */ @@ -448,7 +591,7 @@ }; }; - ltdc_pins_sleep_b: ltdc-b-1 { + ltdc_sleep_pins_b: ltdc-sleep-1 { pins { pinmux = <STM32_PINMUX('I', 14, ANALOG)>, /* LCD_CLK */ <STM32_PINMUX('I', 12, ANALOG)>, /* LCD_HSYNC */ @@ -481,6 +624,142 @@ }; }; + ltdc_pins_c: ltdc-2 { + pins1 { + pinmux = <STM32_PINMUX('B', 1, AF9)>, /* LTDC_R6 */ + <STM32_PINMUX('B', 9, AF14)>, /* LTDC_B7 */ + <STM32_PINMUX('C', 0, AF14)>, /* LTDC_R5 */ + <STM32_PINMUX('D', 3, AF14)>, /* LTDC_G7 */ + <STM32_PINMUX('D', 6, AF14)>, /* LTDC_B2 */ + <STM32_PINMUX('D', 10, AF14)>, /* LTDC_B3 */ + <STM32_PINMUX('E', 11, AF14)>, /* LTDC_G3 */ + <STM32_PINMUX('E', 12, AF14)>, /* LTDC_B4 */ + <STM32_PINMUX('E', 13, AF14)>, /* LTDC_DE */ + <STM32_PINMUX('E', 15, AF14)>, /* LTDC_R7 */ + <STM32_PINMUX('H', 4, AF9)>, /* LTDC_G5 */ + <STM32_PINMUX('H', 8, AF14)>, /* LTDC_R2 */ + <STM32_PINMUX('H', 9, AF14)>, /* LTDC_R3 */ + <STM32_PINMUX('H', 10, AF14)>, /* LTDC_R4 */ + <STM32_PINMUX('H', 13, AF14)>, /* LTDC_G2 */ + <STM32_PINMUX('H', 15, AF14)>, /* LTDC_G4 */ + <STM32_PINMUX('I', 1, AF14)>, /* LTDC_G6 */ + <STM32_PINMUX('I', 5, AF14)>, /* LTDC_B5 */ + <STM32_PINMUX('I', 6, AF14)>, /* LTDC_B6 */ + <STM32_PINMUX('I', 9, AF14)>, /* LTDC_VSYNC */ + <STM32_PINMUX('I', 10, AF14)>; /* LTDC_HSYNC */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 14, AF14)>; /* LTDC_CLK */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + }; + + ltdc_sleep_pins_c: ltdc-sleep-2 { + pins1 { + pinmux = <STM32_PINMUX('B', 1, ANALOG)>, /* LTDC_R6 */ + <STM32_PINMUX('B', 9, ANALOG)>, /* LTDC_B7 */ + <STM32_PINMUX('C', 0, ANALOG)>, /* LTDC_R5 */ + <STM32_PINMUX('D', 3, ANALOG)>, /* LTDC_G7 */ + <STM32_PINMUX('D', 6, ANALOG)>, /* LTDC_B2 */ + <STM32_PINMUX('D', 10, ANALOG)>, /* LTDC_B3 */ + <STM32_PINMUX('E', 11, ANALOG)>, /* LTDC_G3 */ + <STM32_PINMUX('E', 12, ANALOG)>, /* LTDC_B4 */ + <STM32_PINMUX('E', 13, ANALOG)>, /* LTDC_DE */ + <STM32_PINMUX('E', 15, ANALOG)>, /* LTDC_R7 */ + <STM32_PINMUX('H', 4, ANALOG)>, /* LTDC_G5 */ + <STM32_PINMUX('H', 8, ANALOG)>, /* LTDC_R2 */ + <STM32_PINMUX('H', 9, ANALOG)>, /* LTDC_R3 */ + <STM32_PINMUX('H', 10, ANALOG)>, /* LTDC_R4 */ + <STM32_PINMUX('H', 13, ANALOG)>, /* LTDC_G2 */ + <STM32_PINMUX('H', 15, ANALOG)>, /* LTDC_G4 */ + <STM32_PINMUX('I', 1, ANALOG)>, /* LTDC_G6 */ + <STM32_PINMUX('I', 5, ANALOG)>, /* LTDC_B5 */ + <STM32_PINMUX('I', 6, ANALOG)>, /* LTDC_B6 */ + <STM32_PINMUX('I', 9, ANALOG)>, /* LTDC_VSYNC */ + <STM32_PINMUX('I', 10, ANALOG)>, /* LTDC_HSYNC */ + <STM32_PINMUX('E', 14, ANALOG)>; /* LTDC_CLK */ + }; + }; + + ltdc_pins_d: ltdc-3 { + pins1 { + pinmux = <STM32_PINMUX('G', 7, AF14)>; /* LCD_CLK */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + pins2 { + pinmux = <STM32_PINMUX('I', 10, AF14)>, /* LCD_HSYNC */ + <STM32_PINMUX('I', 9, AF14)>, /* LCD_VSYNC */ + <STM32_PINMUX('E', 13, AF14)>, /* LCD_DE */ + <STM32_PINMUX('G', 13, AF14)>, /* LCD_R0 */ + <STM32_PINMUX('H', 3, AF14)>, /* LCD_R1 */ + <STM32_PINMUX('H', 8, AF14)>, /* LCD_R2 */ + <STM32_PINMUX('H', 9, AF14)>, /* LCD_R3 */ + <STM32_PINMUX('A', 5, AF14)>, /* LCD_R4 */ + <STM32_PINMUX('H', 11, AF14)>, /* LCD_R5 */ + <STM32_PINMUX('H', 12, AF14)>, /* LCD_R6 */ + <STM32_PINMUX('E', 15, AF14)>, /* LCD_R7 */ + <STM32_PINMUX('E', 5, AF14)>, /* LCD_G0 */ + <STM32_PINMUX('B', 0, AF14)>, /* LCD_G1 */ + <STM32_PINMUX('H', 13, AF14)>, /* LCD_G2 */ + <STM32_PINMUX('E', 11, AF14)>, /* LCD_G3 */ + <STM32_PINMUX('H', 15, AF14)>, /* LCD_G4 */ + <STM32_PINMUX('H', 4, AF9)>, /* LCD_G5 */ + <STM32_PINMUX('I', 11, AF9)>, /* LCD_G6 */ + <STM32_PINMUX('G', 8, AF14)>, /* LCD_G7 */ + <STM32_PINMUX('D', 9, AF14)>, /* LCD_B0 */ + <STM32_PINMUX('G', 12, AF14)>, /* LCD_B1 */ + <STM32_PINMUX('G', 10, AF14)>, /* LCD_B2 */ + <STM32_PINMUX('D', 10, AF14)>, /* LCD_B3 */ + <STM32_PINMUX('E', 12, AF14)>, /* LCD_B4 */ + <STM32_PINMUX('A', 3, AF14)>, /* LCD_B5 */ + <STM32_PINMUX('B', 8, AF14)>, /* LCD_B6 */ + <STM32_PINMUX('I', 7, AF14)>; /* LCD_B7 */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + }; + + ltdc_sleep_pins_d: ltdc-sleep-3 { + pins { + pinmux = <STM32_PINMUX('G', 7, ANALOG)>, /* LCD_CLK */ + <STM32_PINMUX('I', 10, ANALOG)>, /* LCD_HSYNC */ + <STM32_PINMUX('I', 9, ANALOG)>, /* LCD_VSYNC */ + <STM32_PINMUX('E', 13, ANALOG)>, /* LCD_DE */ + <STM32_PINMUX('G', 13, ANALOG)>, /* LCD_R0 */ + <STM32_PINMUX('H', 3, ANALOG)>, /* LCD_R1 */ + <STM32_PINMUX('H', 8, ANALOG)>, /* LCD_R2 */ + <STM32_PINMUX('H', 9, ANALOG)>, /* LCD_R3 */ + <STM32_PINMUX('A', 5, ANALOG)>, /* LCD_R4 */ + <STM32_PINMUX('H', 11, ANALOG)>, /* LCD_R5 */ + <STM32_PINMUX('H', 12, ANALOG)>, /* LCD_R6 */ + <STM32_PINMUX('E', 15, ANALOG)>, /* LCD_R7 */ + <STM32_PINMUX('E', 5, ANALOG)>, /* LCD_G0 */ + <STM32_PINMUX('B', 0, ANALOG)>, /* LCD_G1 */ + <STM32_PINMUX('H', 13, ANALOG)>, /* LCD_G2 */ + <STM32_PINMUX('E', 11, ANALOG)>, /* LCD_G3 */ + <STM32_PINMUX('H', 15, ANALOG)>, /* LCD_G4 */ + <STM32_PINMUX('H', 4, ANALOG)>, /* LCD_G5 */ + <STM32_PINMUX('I', 11, ANALOG)>, /* LCD_G6 */ + <STM32_PINMUX('G', 8, ANALOG)>, /* LCD_G7 */ + <STM32_PINMUX('D', 9, ANALOG)>, /* LCD_B0 */ + <STM32_PINMUX('G', 12, ANALOG)>, /* LCD_B1 */ + <STM32_PINMUX('G', 10, ANALOG)>, /* LCD_B2 */ + <STM32_PINMUX('D', 10, ANALOG)>, /* LCD_B3 */ + <STM32_PINMUX('E', 12, ANALOG)>, /* LCD_B4 */ + <STM32_PINMUX('A', 3, ANALOG)>, /* LCD_B5 */ + <STM32_PINMUX('B', 8, ANALOG)>, /* LCD_B6 */ + <STM32_PINMUX('I', 7, ANALOG)>; /* LCD_B7 */ + }; + }; + m_can1_pins_a: m-can1-0 { pins1 { pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */ @@ -501,6 +780,46 @@ }; }; + m_can1_pins_b: m-can1-1 { + pins1 { + pinmux = <STM32_PINMUX('A', 12, AF9)>; /* CAN1_TX */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('A', 11, AF9)>; /* CAN1_RX */ + bias-disable; + }; + }; + + m_can1_sleep_pins_b: m_can1-sleep-1 { + pins { + pinmux = <STM32_PINMUX('A', 12, ANALOG)>, /* CAN1_TX */ + <STM32_PINMUX('A', 11, ANALOG)>; /* CAN1_RX */ + }; + }; + + m_can2_pins_a: m-can2-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 13, AF9)>; /* CAN2_TX */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 5, AF9)>; /* CAN2_RX */ + bias-disable; + }; + }; + + m_can2_sleep_pins_a: m_can2-sleep-0 { + pins { + pinmux = <STM32_PINMUX('B', 13, ANALOG)>, /* CAN2_TX */ + <STM32_PINMUX('B', 5, ANALOG)>; /* CAN2_RX */ + }; + }; + pwm1_pins_a: pwm1-0 { pins { pinmux = <STM32_PINMUX('E', 9, AF1)>, /* TIM1_CH1 */ @@ -550,6 +869,21 @@ }; }; + pwm3_pins_b: pwm3-1 { + pins { + pinmux = <STM32_PINMUX('B', 5, AF2)>; /* TIM3_CH2 */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm3_sleep_pins_b: pwm3-sleep-1 { + pins { + pinmux = <STM32_PINMUX('B', 5, ANALOG)>; /* TIM3_CH2 */ + }; + }; + pwm4_pins_a: pwm4-0 { pins { pinmux = <STM32_PINMUX('D', 14, AF2)>, /* TIM4_CH3 */ @@ -597,6 +931,25 @@ }; }; + pwm5_pins_b: pwm5-1 { + pins { + pinmux = <STM32_PINMUX('H', 11, AF2)>, /* TIM5_CH2 */ + <STM32_PINMUX('H', 12, AF2)>, /* TIM5_CH3 */ + <STM32_PINMUX('I', 0, AF2)>; /* TIM5_CH4 */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm5_sleep_pins_b: pwm5-sleep-1 { + pins { + pinmux = <STM32_PINMUX('H', 11, ANALOG)>, /* TIM5_CH2 */ + <STM32_PINMUX('H', 12, ANALOG)>, /* TIM5_CH3 */ + <STM32_PINMUX('I', 0, ANALOG)>; /* TIM5_CH4 */ + }; + }; + pwm8_pins_a: pwm8-0 { pins { pinmux = <STM32_PINMUX('I', 2, AF3)>; /* TIM8_CH4 */ @@ -710,7 +1063,7 @@ }; }; - sai2a_sleep_pins_a: sai2a-1 { + sai2a_sleep_pins_a: sai2a-sleep-0 { pins { pinmux = <STM32_PINMUX('I', 5, ANALOG)>, /* SAI2_SCK_A */ <STM32_PINMUX('I', 6, ANALOG)>, /* SAI2_SD_A */ @@ -720,7 +1073,7 @@ }; - sai2a_pins_b: sai2a-2 { + sai2a_pins_b: sai2a-1 { pins1 { pinmux = <STM32_PINMUX('I', 6, AF10)>, /* SAI2_SD_A */ <STM32_PINMUX('I', 7, AF10)>, /* SAI2_FS_A */ @@ -731,7 +1084,7 @@ }; }; - sai2a_sleep_pins_b: sai2a-sleep-3 { + sai2a_sleep_pins_b: sai2a-sleep-1 { pins { pinmux = <STM32_PINMUX('I', 6, ANALOG)>, /* SAI2_SD_A */ <STM32_PINMUX('I', 7, ANALOG)>, /* SAI2_FS_A */ @@ -739,6 +1092,25 @@ }; }; + sai2a_pins_c: sai2a-4 { + pins { + pinmux = <STM32_PINMUX('D', 13, AF10)>, /* SAI2_SCK_A */ + <STM32_PINMUX('D', 11, AF10)>, /* SAI2_SD_A */ + <STM32_PINMUX('D', 12, AF10)>; /* SAI2_FS_A */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + }; + + sai2a_sleep_pins_c: sai2a-5 { + pins { + pinmux = <STM32_PINMUX('D', 13, ANALOG)>, /* SAI2_SCK_A */ + <STM32_PINMUX('D', 11, ANALOG)>, /* SAI2_SD_A */ + <STM32_PINMUX('D', 12, ANALOG)>; /* SAI2_FS_A */ + }; + }; + sai2b_pins_a: sai2b-0 { pins1 { pinmux = <STM32_PINMUX('E', 12, AF10)>, /* SAI2_SCK_B */ @@ -754,7 +1126,7 @@ }; }; - sai2b_sleep_pins_a: sai2b-1 { + sai2b_sleep_pins_a: sai2b-sleep-0 { pins { pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* SAI2_SD_B */ <STM32_PINMUX('E', 12, ANALOG)>, /* SAI2_SCK_B */ @@ -763,14 +1135,27 @@ }; }; - sai2b_pins_b: sai2b-2 { + sai2b_pins_b: sai2b-1 { pins { pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */ bias-disable; }; }; - sai2b_sleep_pins_b: sai2b-3 { + sai2b_sleep_pins_b: sai2b-sleep-1 { + pins { + pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */ + }; + }; + + sai2b_pins_c: sai2a-4 { + pins1 { + pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */ + bias-disable; + }; + }; + + sai2b_sleep_pins_c: sai2a-sleep-5 { pins { pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */ }; @@ -785,7 +1170,7 @@ }; }; - sai4a_sleep_pins_a: sai4a-1 { + sai4a_sleep_pins_a: sai4a-sleep-0 { pins { pinmux = <STM32_PINMUX('B', 5, ANALOG)>; /* SAI4_SD_A */ }; @@ -869,6 +1254,30 @@ }; }; + sdmmc1_dir_pins_b: sdmmc1-dir-1 { + pins1 { + pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */ + <STM32_PINMUX('E', 14, AF11)>, /* SDMMC1_D123DIR */ + <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2{ + pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */ + bias-pull-up; + }; + }; + + sdmmc1_dir_sleep_pins_b: sdmmc1-dir-sleep-1 { + pins { + pinmux = <STM32_PINMUX('F', 2, ANALOG)>, /* SDMMC1_D0DIR */ + <STM32_PINMUX('E', 14, ANALOG)>, /* SDMMC1_D123DIR */ + <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */ + <STM32_PINMUX('E', 4, ANALOG)>; /* SDMMC1_CKIN */ + }; + }; + sdmmc2_b4_pins_a: sdmmc2-b4-0 { pins1 { pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ @@ -987,6 +1396,48 @@ }; }; + sdmmc2_d47_pins_b: sdmmc2-d47-1 { + pins { + pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */ + <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */ + <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + }; + + sdmmc2_d47_sleep_pins_b: sdmmc2-d47-sleep-1 { + pins { + pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */ + <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */ + <STM32_PINMUX('C', 7, ANALOG)>; /* SDMMC2_D7 */ + }; + }; + + sdmmc2_d47_pins_c: sdmmc2-d47-2 { + pins { + pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 15, AF9)>, /* SDMMC2_D5 */ + <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */ + <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + }; + + sdmmc2_d47_sleep_pins_c: sdmmc2-d47-sleep-2 { + pins { + pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 15, ANALOG)>, /* SDMMC2_D5 */ + <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */ + <STM32_PINMUX('C', 7, ANALOG)>; /* SDMMC2_D7 */ + }; + }; + sdmmc3_b4_pins_a: sdmmc3-b4-0 { pins1 { pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */ @@ -1041,6 +1492,60 @@ }; }; + sdmmc3_b4_pins_b: sdmmc3-b4-1 { + pins1 { + pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */ + <STM32_PINMUX('F', 4, AF9)>, /* SDMMC3_D1 */ + <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */ + <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */ + <STM32_PINMUX('D', 0, AF10)>; /* SDMMC3_CMD */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2 { + pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + }; + + sdmmc3_b4_od_pins_b: sdmmc3-b4-od-1 { + pins1 { + pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */ + <STM32_PINMUX('F', 4, AF9)>, /* SDMMC3_D1 */ + <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */ + <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2 { + pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + pins3 { + pinmux = <STM32_PINMUX('D', 0, AF10)>; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-open-drain; + bias-pull-up; + }; + }; + + sdmmc3_b4_sleep_pins_b: sdmmc3-b4-sleep-1 { + pins { + pinmux = <STM32_PINMUX('F', 0, ANALOG)>, /* SDMMC3_D0 */ + <STM32_PINMUX('F', 4, ANALOG)>, /* SDMMC3_D1 */ + <STM32_PINMUX('D', 5, ANALOG)>, /* SDMMC3_D2 */ + <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */ + <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */ + <STM32_PINMUX('D', 0, ANALOG)>; /* SDMMC3_CMD */ + }; + }; + spdifrx_pins_a: spdifrx-0 { pins { pinmux = <STM32_PINMUX('G', 12, AF8)>; /* SPDIF_IN1 */ @@ -1048,12 +1553,75 @@ }; }; - spdifrx_sleep_pins_a: spdifrx-1 { + spdifrx_sleep_pins_a: spdifrx-sleep-0 { pins { pinmux = <STM32_PINMUX('G', 12, ANALOG)>; /* SPDIF_IN1 */ }; }; + spi2_pins_a: spi2-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 10, AF5)>, /* SPI1_SCK */ + <STM32_PINMUX('I', 3, AF5)>; /* SPI1_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + + pins2 { + pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI1_MISO */ + bias-disable; + }; + }; + + usart2_pins_a: usart2-0 { + pins1 { + pinmux = <STM32_PINMUX('F', 5, AF7)>, /* USART2_TX */ + <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('D', 6, AF7)>, /* USART2_RX */ + <STM32_PINMUX('D', 3, AF7)>; /* USART2_CTS_NSS */ + bias-disable; + }; + }; + + usart2_sleep_pins_a: usart2-sleep-0 { + pins { + pinmux = <STM32_PINMUX('F', 5, ANALOG)>, /* USART2_TX */ + <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS */ + <STM32_PINMUX('D', 6, ANALOG)>, /* USART2_RX */ + <STM32_PINMUX('D', 3, ANALOG)>; /* USART2_CTS_NSS */ + }; + }; + + usart2_pins_b: usart2-1 { + pins1 { + pinmux = <STM32_PINMUX('F', 5, AF7)>, /* USART2_TX */ + <STM32_PINMUX('A', 1, AF7)>; /* USART2_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('F', 4, AF7)>, /* USART2_RX */ + <STM32_PINMUX('E', 15, AF7)>; /* USART2_CTS_NSS */ + bias-disable; + }; + }; + + usart2_sleep_pins_b: usart2-sleep-1 { + pins { + pinmux = <STM32_PINMUX('F', 5, ANALOG)>, /* USART2_TX */ + <STM32_PINMUX('A', 1, ANALOG)>, /* USART2_RTS */ + <STM32_PINMUX('F', 4, ANALOG)>, /* USART2_RX */ + <STM32_PINMUX('E', 15, ANALOG)>; /* USART2_CTS_NSS */ + }; + }; + usart3_pins_a: usart3-0 { pins1 { pinmux = <STM32_PINMUX('B', 10, AF7)>; /* USART3_TX */ @@ -1093,6 +1661,19 @@ }; }; + uart4_pins_c: uart4-2 { + pins1 { + pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ + bias-disable; + }; + }; + uart7_pins_a: uart7-0 { pins1 { pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART4_TX */ @@ -1108,6 +1689,19 @@ }; }; + uart7_pins_b: uart7-1 { + pins1 { + pinmux = <STM32_PINMUX('F', 7, AF7)>; /* UART7_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('F', 6, AF7)>; /* UART7_RX */ + bias-disable; + }; + }; + uart8_pins_a: uart8-0 { pins1 { pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */ @@ -1145,7 +1739,7 @@ }; }; - i2c2_pins_sleep_b2: i2c2-1 { + i2c2_sleep_pins_b2: i2c2-sleep-0 { pins { pinmux = <STM32_PINMUX('Z', 0, ANALOG)>; /* I2C2_SCL */ }; @@ -1161,7 +1755,7 @@ }; }; - i2c4_pins_sleep_a: i2c4-1 { + i2c4_sleep_pins_a: i2c4-sleep-0 { pins { pinmux = <STM32_PINMUX('Z', 4, ANALOG)>, /* I2C4_SCL */ <STM32_PINMUX('Z', 5, ANALOG)>; /* I2C4_SDA */ @@ -1182,4 +1776,18 @@ bias-disable; }; }; + + spi4_pins_a: spi4-0 { + pins { + pinmux = <STM32_PINMUX('E', 12, AF5)>, /* SPI4_SCK */ + <STM32_PINMUX('E', 6, AF5)>; /* SPI4_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 13, AF5)>; /* SPI4_MISO */ + bias-disable; + }; + }; }; diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index 3ea05ba48215..36f38a95b4de 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -24,10 +24,8 @@ }; psci { - compatible = "arm,psci"; + compatible = "arm,psci-1.0"; method = "smc"; - cpu_off = <0x84000002>; - cpu_on = <0x84000003>; }; intc: interrupt-controller@a0021000 { @@ -475,7 +473,7 @@ }; i2c1: i2c@40012000 { - compatible = "st,stm32f7-i2c"; + compatible = "st,stm32mp15-i2c"; reg = <0x40012000 0x400>; interrupt-names = "event", "error"; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, @@ -484,12 +482,13 @@ resets = <&rcc I2C1_R>; #address-cells = <1>; #size-cells = <0>; + st,syscfg-fmp = <&syscfg 0x4 0x1>; wakeup-source; status = "disabled"; }; i2c2: i2c@40013000 { - compatible = "st,stm32f7-i2c"; + compatible = "st,stm32mp15-i2c"; reg = <0x40013000 0x400>; interrupt-names = "event", "error"; interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, @@ -498,12 +497,13 @@ resets = <&rcc I2C2_R>; #address-cells = <1>; #size-cells = <0>; + st,syscfg-fmp = <&syscfg 0x4 0x2>; wakeup-source; status = "disabled"; }; i2c3: i2c@40014000 { - compatible = "st,stm32f7-i2c"; + compatible = "st,stm32mp15-i2c"; reg = <0x40014000 0x400>; interrupt-names = "event", "error"; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, @@ -512,12 +512,13 @@ resets = <&rcc I2C3_R>; #address-cells = <1>; #size-cells = <0>; + st,syscfg-fmp = <&syscfg 0x4 0x4>; wakeup-source; status = "disabled"; }; i2c5: i2c@40015000 { - compatible = "st,stm32f7-i2c"; + compatible = "st,stm32mp15-i2c"; reg = <0x40015000 0x400>; interrupt-names = "event", "error"; interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, @@ -526,6 +527,7 @@ resets = <&rcc I2C5_R>; #address-cells = <1>; #size-cells = <0>; + st,syscfg-fmp = <&syscfg 0x4 0x10>; wakeup-source; status = "disabled"; }; @@ -550,14 +552,14 @@ dac1: dac@1 { compatible = "st,stm32-dac"; - #io-channels-cells = <1>; + #io-channel-cells = <1>; reg = <1>; status = "disabled"; }; dac2: dac@2 { compatible = "st,stm32-dac"; - #io-channels-cells = <1>; + #io-channel-cells = <1>; reg = <2>; status = "disabled"; }; @@ -1124,6 +1126,11 @@ }; }; + pwr_mcu: pwr_mcu@50001014 { + compatible = "syscon"; + reg = <0x50001014 0x4>; + }; + exti: interrupt-controller@5000d000 { compatible = "st,stm32mp1-exti", "syscon"; interrupt-controller; @@ -1423,6 +1430,11 @@ clock-names = "lcd"; resets = <&rcc LTDC_R>; status = "disabled"; + + port { + #address-cells = <1>; + #size-cells = <0>; + }; }; iwdg2: watchdog@5a002000 { @@ -1476,7 +1488,7 @@ }; i2c4: i2c@5c002000 { - compatible = "st,stm32f7-i2c"; + compatible = "st,stm32mp15-i2c"; reg = <0x5c002000 0x400>; interrupt-names = "event", "error"; interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, @@ -1485,6 +1497,7 @@ resets = <&rcc I2C4_R>; #address-cells = <1>; #size-cells = <0>; + st,syscfg-fmp = <&syscfg 0x4 0x8>; wakeup-source; status = "disabled"; }; @@ -1512,7 +1525,7 @@ }; i2c6: i2c@5c009000 { - compatible = "st,stm32f7-i2c"; + compatible = "st,stm32mp15-i2c"; reg = <0x5c009000 0x400>; interrupt-names = "event", "error"; interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, @@ -1521,6 +1534,7 @@ resets = <&rcc I2C6_R>; #address-cells = <1>; #size-cells = <0>; + st,syscfg-fmp = <&syscfg 0x4 0x20>; wakeup-source; status = "disabled"; }; @@ -1700,6 +1714,7 @@ resets = <&rcc MCU_R>; st,syscfg-holdboot = <&rcc 0x10C 0x1>; st,syscfg-tz = <&rcc 0x000 0x1>; + st,syscfg-pdds = <&pwr_mcu 0x0 0x1>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/stm32mp157.dtsi b/arch/arm/boot/dts/stm32mp157.dtsi index 3f0a4a91cce6..54e73ccea446 100644 --- a/arch/arm/boot/dts/stm32mp157.dtsi +++ b/arch/arm/boot/dts/stm32mp157.dtsi @@ -15,7 +15,6 @@ clocks = <&rcc GPU>, <&rcc GPU_K>; clock-names = "bus" ,"core"; resets = <&rcc GPU_R>; - status = "disabled"; }; dsi: dsi@5a000000 { @@ -25,7 +24,14 @@ clock-names = "pclk", "ref", "px_clk"; resets = <&rcc DSI_R>; reset-names = "apb"; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + }; }; }; }; diff --git a/arch/arm/boot/dts/stm32mp157a-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-avenger96.dts index 425175f7d83c..8a6eaca994d1 100644 --- a/arch/arm/boot/dts/stm32mp157a-avenger96.dts +++ b/arch/arm/boot/dts/stm32mp157a-avenger96.dts @@ -2,318 +2,10 @@ /* * Copyright (C) Linaro Ltd 2019 - All Rights Reserved * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + * Copyright (C) 2020 Marek Vasut <marex@denx.de> */ /dts-v1/; -#include "stm32mp157.dtsi" -#include "stm32mp15-pinctrl.dtsi" -#include "stm32mp15xxac-pinctrl.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/mfd/st,stpmic1.h> - -/ { - model = "Arrow Electronics STM32MP157A Avenger96 board"; - compatible = "arrow,stm32mp157a-avenger96", "st,stm32mp157"; - - aliases { - ethernet0 = ðernet0; - mmc0 = &sdmmc1; - serial0 = &uart4; - serial1 = &uart7; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@c0000000 { - device_type = "memory"; - reg = <0xc0000000 0x40000000>; - }; - - led { - compatible = "gpio-leds"; - led1 { - label = "green:user1"; - gpios = <&gpioz 7 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - default-state = "off"; - }; - - led2 { - label = "green:user2"; - gpios = <&gpiof 3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc0"; - default-state = "off"; - }; - - led3 { - label = "green:user3"; - gpios = <&gpiog 0 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc1"; - default-state = "off"; - }; - - led4 { - label = "green:user3"; - gpios = <&gpiog 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "none"; - default-state = "off"; - panic-indicator; - }; - - led5 { - label = "yellow:wifi"; - gpios = <&gpioz 3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tx"; - default-state = "off"; - }; - - led6 { - label = "blue:bt"; - gpios = <&gpioz 6 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "bluetooth-power"; - default-state = "off"; - }; - }; -}; - -ðernet0 { - status = "okay"; - pinctrl-0 = <ðernet0_rgmii_pins_a>; - pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>; - pinctrl-names = "default", "sleep"; - phy-mode = "rgmii"; - max-speed = <1000>; - phy-handle = <&phy0>; - - mdio0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - phy0: ethernet-phy@7 { - reg = <7>; - }; - }; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_b>; - i2c-scl-rising-time-ns = <185>; - i2c-scl-falling-time-ns = <20>; - status = "okay"; - /delete-property/dmas; - /delete-property/dma-names; -}; - -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_b1 &i2c2_pins_b2>; - i2c-scl-rising-time-ns = <185>; - i2c-scl-falling-time-ns = <20>; - status = "okay"; - /delete-property/dmas; - /delete-property/dma-names; -}; - -&i2c4 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c4_pins_a>; - i2c-scl-rising-time-ns = <185>; - i2c-scl-falling-time-ns = <20>; - status = "okay"; - /delete-property/dmas; - /delete-property/dma-names; - - pmic: stpmic@33 { - compatible = "st,stpmic1"; - reg = <0x33>; - interrupts-extended = <&exti 55 IRQ_TYPE_EDGE_FALLING>; - interrupt-controller; - #interrupt-cells = <2>; - status = "okay"; - - regulators { - compatible = "st,stpmic1-regulators"; - - ldo1-supply = <&v3v3>; - ldo2-supply = <&v3v3>; - ldo3-supply = <&vdd_ddr>; - ldo5-supply = <&v3v3>; - ldo6-supply = <&v3v3>; - pwr_sw1-supply = <&bst_out>; - pwr_sw2-supply = <&bst_out>; - - vddcore: buck1 { - regulator-name = "vddcore"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-initial-mode = <0>; - regulator-over-current-protection; - }; - - vdd_ddr: buck2 { - regulator-name = "vdd_ddr"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-initial-mode = <0>; - regulator-over-current-protection; - }; - - vdd: buck3 { - regulator-name = "vdd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-initial-mode = <0>; - regulator-over-current-protection; - }; - - v3v3: buck4 { - regulator-name = "v3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-over-current-protection; - regulator-initial-mode = <0>; - }; - - vdda: ldo1 { - regulator-name = "vdda"; - regulator-min-microvolt = <2900000>; - regulator-max-microvolt = <2900000>; - interrupts = <IT_CURLIM_LDO1 0>; - interrupt-parent = <&pmic>; - }; - - v2v8: ldo2 { - regulator-name = "v2v8"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - interrupts = <IT_CURLIM_LDO2 0>; - interrupt-parent = <&pmic>; - }; - - vtt_ddr: ldo3 { - regulator-name = "vtt_ddr"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <750000>; - regulator-always-on; - regulator-over-current-protection; - }; - - vdd_usb: ldo4 { - regulator-name = "vdd_usb"; - interrupts = <IT_CURLIM_LDO4 0>; - interrupt-parent = <&pmic>; - }; - - vdd_sd: ldo5 { - regulator-name = "vdd_sd"; - regulator-min-microvolt = <2900000>; - regulator-max-microvolt = <2900000>; - interrupts = <IT_CURLIM_LDO5 0>; - interrupt-parent = <&pmic>; - regulator-boot-on; - }; - - v1v8: ldo6 { - regulator-name = "v1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - interrupts = <IT_CURLIM_LDO6 0>; - interrupt-parent = <&pmic>; - regulator-enable-ramp-delay = <300000>; - }; - - vref_ddr: vref_ddr { - regulator-name = "vref_ddr"; - regulator-always-on; - }; - - bst_out: boost { - regulator-name = "bst_out"; - interrupts = <IT_OCP_BOOST 0>; - interrupt-parent = <&pmic>; - }; - - vbus_otg: pwr_sw1 { - regulator-name = "vbus_otg"; - interrupts = <IT_OCP_OTG 0>; - interrupt-parent = <&pmic>; - }; - - vbus_sw: pwr_sw2 { - regulator-name = "vbus_sw"; - interrupts = <IT_OCP_SWOUT 0>; - interrupt-parent = <&pmic>; - regulator-active-discharge = <1>; - }; - }; - - onkey { - compatible = "st,stpmic1-onkey"; - interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>; - interrupt-names = "onkey-falling", "onkey-rising"; - status = "okay"; - }; - - watchdog { - compatible = "st,stpmic1-wdt"; - status = "disabled"; - }; - }; -}; - -&iwdg2 { - timeout-sec = <32>; - status = "okay"; -}; - -&pwr_regulators { - vdd-supply = <&vdd>; - vdd_3v3_usbfs-supply = <&vdd_usb>; -}; - -&rng1 { - status = "okay"; -}; - -&rtc { - status = "okay"; -}; - -&sdmmc1 { - pinctrl-names = "default", "opendrain", "sleep"; - pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>; - pinctrl-1 = <&sdmmc1_b4_od_pins_a>; - pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; - cd-gpios = <&gpioi 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; - disable-wp; - st,sig-dir; - st,neg-edge; - st,use-ckin; - bus-width = <4>; - vmmc-supply = <&vdd_sd>; - status = "okay"; -}; - -&uart4 { - /* On Low speed expansion header */ - label = "LS-UART1"; - pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins_b>; - status = "okay"; -}; - -&uart7 { - /* On Low speed expansion header */ - label = "LS-UART0"; - pinctrl-names = "default"; - pinctrl-0 = <&uart7_pins_a>; - status = "okay"; -}; +/* This DT is here only for backward compatibility */ +#include "stm32mp157a-dhcor-avenger96.dts" diff --git a/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts new file mode 100644 index 000000000000..2e3c9fbb4eb3 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts @@ -0,0 +1,38 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +/* + * Copyright (C) Linaro Ltd 2019 - All Rights Reserved + * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + * Copyright (C) 2020 Marek Vasut <marex@denx.de> + * + * DHCOR STM32MP1 variant: + * DHCR-STM32MP157A-C065-R102-V18-SPI-C-01LG + * DHCOR PCB number: 586-100 or newer + * Avenger96 PCB number: 588-200 or newer + */ + +/dts-v1/; + +#include "stm32mp157.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15xx-dhcor-som.dtsi" +#include "stm32mp15xx-dhcor-avenger96.dtsi" + +/ { + model = "Arrow Electronics STM32MP157A Avenger96 board"; + compatible = "arrow,stm32mp157a-avenger96", "dh,stm32mp157a-dhcor-som", + "st,stm32mp157"; +}; + +&m_can1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&m_can1_pins_b>; + pinctrl-1 = <&m_can1_sleep_pins_b>; + status = "disabled"; +}; + +&m_can2 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&m_can2_pins_a>; + pinctrl-1 = <&m_can2_sleep_pins_a>; + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/stm32mp157a-iot-box.dts b/arch/arm/boot/dts/stm32mp157a-iot-box.dts new file mode 100644 index 000000000000..70f394b4d3c0 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157a-iot-box.dts @@ -0,0 +1,68 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2020 Manivannan Sadhasivam + */ + +/dts-v1/; +#include "stm32mp157a-stinger96.dtsi" + +/ { + model = "Shiratech STM32MP157A IoT Box"; + compatible = "shiratech,stm32mp157a-iot-box", "st,stm32mp157"; + + wlan_pwr: regulator-wlan { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpiog 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&i2c2 { + ccs811@5b { + compatible = "ams,ccs811"; + reg = <0x5b>; + wakeup-gpios = <&gpioa 12 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpioa 11 GPIO_ACTIVE_LOW>; + }; +}; + +/* WiFi */ +&sdmmc2 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_a>; + pinctrl-1 = <&sdmmc2_b4_od_pins_b>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a>; + broken-cd; + non-removable; + st,neg-edge; + bus-width = <1>; + vmmc-supply = <&wlan_pwr>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* Bluetooth */ +&uart4 { + /* Note: HW flow control is broken, hence using custom CTS/RTS gpios */ + /delete-property/st,hw-flow-ctrl; + cts-gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; + rts-gpios = <&gpiob 0 GPIO_ACTIVE_LOW>; + status = "okay"; + + bluetooth { + shutdown-gpios = <&gpiog 2 GPIO_ACTIVE_HIGH>; + compatible = "brcm,bcm43438-bt"; + max-speed = <115200>; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp157a-stinger96.dts b/arch/arm/boot/dts/stm32mp157a-stinger96.dts new file mode 100644 index 000000000000..249a53877512 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157a-stinger96.dts @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2020 Manivannan Sadhasivam + */ + +/dts-v1/; +#include "stm32mp157a-stinger96.dtsi" + +/ { + model = "Shiratech STM32MP157A Stinger96 board"; + compatible = "shiratech,stm32mp157a-stinger96", "st,stm32mp157"; +}; diff --git a/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi new file mode 100644 index 000000000000..58275bcf9e26 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi @@ -0,0 +1,342 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2020 Manivannan Sadhasivam + */ + +/dts-v1/; + +#include "stm32mp157.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxac-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/mfd/st,stpmic1.h> + +/ { + aliases { + mmc0 = &sdmmc1; + serial0 = &uart4; + serial1 = &uart7; + serial2 = &usart2; + spi0 = &spi4; + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; + + memory@c0000000 { + device_type = "memory"; + reg = <0xc0000000 0x10000000>; + }; + + led { + compatible = "gpio-leds"; + + led1 { + label = "green:user1"; + gpios = <&gpioa 13 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led2 { + label = "green:user2"; + gpios = <&gpioh 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led3 { + label = "green:user3"; + gpios = <&gpioh 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + + led4 { + label = "green:user4"; + gpios = <&gpiof 12 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + default-state = "off"; + panic-indicator; + }; + }; + + sd_switch: regulator-sd_switch { + compatible = "regulator-gpio"; + regulator-name = "sd_switch"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-type = "voltage"; + regulator-always-on; + + gpios = <&gpioa 8 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + states = <1800000 0x1>, + <2900000 0x0>; + }; +}; + +/* Only headless mode is supported */ +&gpu { + status = "disabled"; +}; + +/* LS-I2C0 */ +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + i2c-scl-rising-time-ns = <1000>; + i2c-scl-falling-time-ns = <300>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; + + pmic: stpmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + status = "okay"; + + regulators { + compatible = "st,stpmic1-regulators"; + + ldo1-supply = <&v3v3>; + ldo2-supply = <&v3v3>; + ldo3-supply = <&vdd_ddr>; + ldo5-supply = <&v3v3>; + ldo6-supply = <&v3v3>; + pwr_sw1-supply = <&bst_out>; + pwr_sw2-supply = <&bst_out>; + + vddcore: buck1 { + regulator-name = "vddcore"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd_ddr: buck2 { + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd: buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + st,mask-reset; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + v3v3: buck4 { + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-over-current-protection; + regulator-initial-mode = <0>; + }; + + vdda: ldo1 { + regulator-name = "vdda"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO1 0>; + }; + + v2v9: ldo2 { + regulator-name = "v2v9"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO2 0>; + }; + + vtt_ddr: ldo3 { + regulator-name = "vtt_ddr"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + regulator-over-current-protection; + }; + + vdd_usb: ldo4 { + regulator-name = "vdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + interrupts = <IT_CURLIM_LDO4 0>; + }; + + vdd_sd: ldo5 { + regulator-name = "vdd_sd"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = <IT_CURLIM_LDO5 0>; + regulator-boot-on; + }; + + v1v8: ldo6 { + regulator-name = "v1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO6 0>; + }; + + vref_ddr: vref_ddr { + regulator-name = "vref_ddr"; + regulator-always-on; + regulator-over-current-protection; + }; + + bst_out: boost { + regulator-name = "bst_out"; + interrupts = <IT_OCP_BOOST 0>; + }; + + vbus_otg: pwr_sw1 { + regulator-name = "vbus_otg"; + interrupts = <IT_OCP_OTG 0>; + regulator-active-discharge; + }; + + vbus_sw: pwr_sw2 { + regulator-name = "vbus_sw"; + interrupts = <IT_OCP_SWOUT 0>; + regulator-active-discharge; + }; + }; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>; + interrupt-names = "onkey-falling", "onkey-rising"; + status = "okay"; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + status = "disabled"; + }; + }; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +&pwr_regulators { + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; +}; + +&rng1 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_b>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_b>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_b>; + broken-cd; + disable-wp; + st,sig-dir; + st,neg-edge; + st,use-ckin; + bus-width = <4>; + vmmc-supply = <&vdd_sd>; + vqmmc-supply = <&sd_switch>; + status = "okay"; +}; + +/* LS-SPI0 */ +&spi4 { + pinctrl-names = "default"; + pinctrl-0 = <&spi4_pins_a>; + cs-gpios = <&gpioe 11 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +/* BG96 */ +&usart2 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&usart2_pins_b>; + pinctrl-1 = <&usart2_sleep_pins_b>; + st,hw-flow-ctrl; + status = "okay"; +}; + +/* LS-UART0 */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_c>; + st,hw-flow-ctrl; + status = "okay"; +}; + +/* Debug console */ +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&uart7_pins_b>; + status = "okay"; +}; + +&usbh_ehci { + phys = <&usbphyc_port0>; + phy-names = "usb"; + status = "okay"; +}; + +&usbotg_hs { + dr_mode = "peripheral"; + pinctrl-0 = <&usbotg_hs_pins_a>; + pinctrl-names = "default"; + phy-names = "usb2-phy"; + phys = <&usbphyc_port1 0>; + vbus-supply = <&vbus_otg>; + status = "okay"; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <&vdd_usb>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; +}; + +&usbphyc_port1 { + phy-supply = <&vdd_usb>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; +}; diff --git a/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts b/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts index af99e132e1b1..197aa98d49e2 100644 --- a/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts +++ b/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts @@ -1,160 +1,23 @@ // SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause /* - * Copyright (C) 2019 Marek Vasut <marex@denx.de> + * Copyright (C) 2019-2020 Marek Vasut <marex@denx.de> + * + * DHCOM STM32MP1 variant: + * DHCM-STM32MP157C-C065-R102-F0819-SPI-E2-CAN2-SDR104-RTC-WBT-T-DSI-I-01D2 + * DHCOR PCB number: 587-200 or newer + * PDK2 PCB number: 516-400 or newer */ +/dts-v1/; -#include "stm32mp157c-dhcom-som.dtsi" -#include <dt-bindings/pwm/pwm.h> +#include "stm32mp157.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15xx-dhcom-som.dtsi" +#include "stm32mp15xx-dhcom-pdk2.dtsi" / { - model = "STMicroelectronics STM32MP157C DHCOM Premium Developer Kit (2)"; - compatible = "dh,stm32mp157c-dhcom-pdk2", "st,stm32mp157"; - - aliases { - serial0 = &uart4; - serial1 = &usart3; - serial2 = &uart8; - ethernet0 = ðernet0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - clk_ext_audio_codec: clock-codec { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24000000>; - }; - - display_bl: display-bl { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; - brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>; - default-brightness-level = <8>; - enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>; - status = "okay"; - }; - - ethernet_vio: vioregulator { - compatible = "regulator-fixed"; - regulator-name = "vio"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpiog 3 GPIO_ACTIVE_LOW>; - regulator-always-on; - regulator-boot-on; - }; - - panel { - compatible = "edt,etm0700g0edh6"; - backlight = <&display_bl>; - - port { - lcd_panel_in: endpoint { - remote-endpoint = <&lcd_display_out>; - }; - }; - }; - - sound { - compatible = "audio-graph-card"; - routing = - "MIC_IN", "Capture", - "Capture", "Mic Bias", - "Playback", "HP_OUT"; - dais = <&sai2a_port &sai2b_port>; - status = "okay"; - }; -}; - -&cec { - pinctrl-names = "default"; - pinctrl-0 = <&cec_pins_a>; - status = "okay"; -}; - -ðernet0 { - status = "okay"; - pinctrl-0 = <ðernet0_rmii_pins_a>; - pinctrl-1 = <ðernet0_rmii_pins_sleep_a>; - pinctrl-names = "default", "sleep"; - phy-mode = "rmii"; - max-speed = <100>; - phy-handle = <&phy0>; - st,eth-ref-clk-sel; - phy-reset-gpios = <&gpioh 15 GPIO_ACTIVE_LOW>; - - mdio0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - - phy0: ethernet-phy@1 { - reg = <1>; - }; - }; -}; - -&i2c5 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c5_pins_a>; - i2c-scl-rising-time-ns = <185>; - i2c-scl-falling-time-ns = <20>; - status = "okay"; - /* spare dmas for other usage */ - /delete-property/dmas; - /delete-property/dma-names; - - sgtl5000: codec@a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - #sound-dai-cells = <0>; - clocks = <&clk_ext_audio_codec>; - VDDA-supply = <&v3v3>; - VDDIO-supply = <&vdd>; - - sgtl5000_port: port { - #address-cells = <1>; - #size-cells = <0>; - - sgtl5000_tx_endpoint: endpoint@0 { - reg = <0>; - remote-endpoint = <&sai2a_endpoint>; - frame-master; - bitclock-master; - }; - - sgtl5000_rx_endpoint: endpoint@1 { - reg = <1>; - remote-endpoint = <&sai2b_endpoint>; - frame-master; - bitclock-master; - }; - }; - - }; - - polytouch@38 { - compatible = "edt,edt-ft5x06"; - reg = <0x38>; - interrupt-parent = <&gpiog>; - interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */ - linux,wakeup; - }; -}; - -<dc { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <<dc_pins_b>; - pinctrl-1 = <<dc_pins_sleep_b>; - status = "okay"; - - port { - lcd_display_out: endpoint { - remote-endpoint = <&lcd_panel_in>; - }; - }; + model = "DH Electronics STM32MP157C DHCOM Premium Developer Kit (2)"; + compatible = "dh,stm32mp157c-dhcom-pdk2", "dh,stm32mp157c-dhcom-som", + "st,stm32mp157"; }; &m_can1 { @@ -163,103 +26,3 @@ pinctrl-1 = <&m_can1_sleep_pins_a>; status = "okay"; }; - -&sai2 { - clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>; - clock-names = "pclk", "x8k", "x11k"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sai2a_pins_b &sai2b_pins_b>; - pinctrl-1 = <&sai2a_sleep_pins_b &sai2b_sleep_pins_b>; - status = "okay"; - - sai2a: audio-controller@4400b004 { - #clock-cells = <0>; - dma-names = "tx"; - clocks = <&rcc SAI2_K>; - clock-names = "sai_ck"; - status = "okay"; - - sai2a_port: port { - sai2a_endpoint: endpoint { - remote-endpoint = <&sgtl5000_tx_endpoint>; - format = "i2s"; - mclk-fs = <512>; - dai-tdm-slot-num = <2>; - dai-tdm-slot-width = <16>; - }; - }; - }; - - sai2b: audio-controller@4400b024 { - dma-names = "rx"; - st,sync = <&sai2a 2>; - clocks = <&rcc SAI2_K>, <&sai2a>; - clock-names = "sai_ck", "MCLK"; - status = "okay"; - - sai2b_port: port { - sai2b_endpoint: endpoint { - remote-endpoint = <&sgtl5000_rx_endpoint>; - format = "i2s"; - mclk-fs = <512>; - dai-tdm-slot-num = <2>; - dai-tdm-slot-width = <16>; - }; - }; - }; -}; - -&timers2 { - /* spare dmas for other usage (un-delete to enable pwm capture) */ - /delete-property/dmas; - /delete-property/dma-names; - status = "okay"; - pwm2: pwm { - pinctrl-0 = <&pwm2_pins_a>; - pinctrl-names = "default"; - status = "okay"; - }; - timer@1 { - status = "okay"; - }; -}; - -&usart3 { - pinctrl-names = "default"; - pinctrl-0 = <&usart3_pins_a>; - status = "okay"; -}; - -&uart8 { - pinctrl-names = "default"; - pinctrl-0 = <&uart8_pins_a>; - status = "okay"; -}; - -&usbh_ehci { - phys = <&usbphyc_port0>; - status = "okay"; -}; - -&usbotg_hs { - dr_mode = "peripheral"; - phys = <&usbphyc_port1 0>; - phy-names = "usb2-phy"; - status = "okay"; -}; - -&usbphyc { - status = "okay"; -}; - -&usbphyc_port0 { - phy-supply = <&vdd_usb>; - vdda1v1-supply = <®11>; - vdda1v8-supply = <®18>; -}; - -&usbphyc_port1 { - phy-supply = <&vdd_usb>; - vdda1v1-supply = <®11>; - vdda1v8-supply = <®18>; -}; diff --git a/arch/arm/boot/dts/stm32mp157c-dk2.dts b/arch/arm/boot/dts/stm32mp157c-dk2.dts index 7985b80967ca..9a8a26710ac1 100644 --- a/arch/arm/boot/dts/stm32mp157c-dk2.dts +++ b/arch/arm/boot/dts/stm32mp157c-dk2.dts @@ -27,15 +27,10 @@ }; &dsi { - #address-cells = <1>; - #size-cells = <0>; status = "okay"; phy-dsi-supply = <®18>; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { reg = <0>; dsi_in: endpoint { @@ -83,9 +78,6 @@ status = "okay"; port { - #address-cells = <1>; - #size-cells = <0>; - ltdc_ep1_out: endpoint@1 { reg = <1>; remote-endpoint = <&dsi_in>; diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts index 9d2592db630c..32ccd50b4144 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts @@ -126,13 +126,12 @@ &gpu { contiguous-area = <&gpu_reserved>; - status = "okay"; }; &i2c4 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c4_pins_a>; - pinctrl-1 = <&i2c4_pins_sleep_a>; + pinctrl-1 = <&i2c4_sleep_pins_a>; i2c-scl-rising-time-ns = <185>; i2c-scl-falling-time-ns = <20>; clock-frequency = <400000>; @@ -320,6 +319,10 @@ bus-width = <4>; vmmc-supply = <&vdd_sd>; vqmmc-supply = <&sd_switch>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-ddr50; status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index 8a4c7ff31a92..b19056557ef0 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -98,15 +98,10 @@ }; &dsi { - #address-cells = <1>; - #size-cells = <0>; phy-dsi-supply = <®18>; status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { reg = <0>; dsi_in: endpoint { @@ -141,7 +136,7 @@ ðernet0 { status = "okay"; pinctrl-0 = <ðernet0_rgmii_pins_a>; - pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>; + pinctrl-1 = <ðernet0_rgmii_sleep_pins_a>; pinctrl-names = "default", "sleep"; phy-mode = "rgmii-id"; max-speed = <1000>; @@ -176,7 +171,7 @@ &i2c2 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c2_pins_a>; - pinctrl-1 = <&i2c2_pins_sleep_a>; + pinctrl-1 = <&i2c2_sleep_pins_a>; i2c-scl-rising-time-ns = <185>; i2c-scl-falling-time-ns = <20>; status = "okay"; @@ -230,7 +225,7 @@ &i2c5 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c5_pins_a>; - pinctrl-1 = <&i2c5_pins_sleep_a>; + pinctrl-1 = <&i2c5_sleep_pins_a>; i2c-scl-rising-time-ns = <185>; i2c-scl-falling-time-ns = <20>; status = "okay"; @@ -240,9 +235,6 @@ status = "okay"; port { - #address-cells = <1>; - #size-cells = <0>; - ltdc_ep0_out: endpoint@0 { reg = <0>; remote-endpoint = <&dsi_in>; diff --git a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts new file mode 100644 index 000000000000..5700e6b700d3 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts @@ -0,0 +1,252 @@ +/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) */ +/* + * Copyright (C) 2020 STMicroelectronics - All Rights Reserved + * Copyright (C) 2020 Ahmad Fatoum, Pengutronix + */ + +/dts-v1/; + +#include "stm32mp157.dtsi" +#include "stm32mp15xx-osd32.dtsi" +#include "stm32mp15xxac-pinctrl.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + model = "Linux Automation MC-1 board"; + compatible = "lxa,stm32mp157c-mc1", "st,stm32mp157"; + + aliases { + ethernet0 = ðernet0; + mmc0 = &sdmmc1; + mmc1 = &sdmmc2; + serial0 = &uart4; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&backlight_pwm 1 100000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 31 63 95 127 159 191 223 255>; + default-brightness-level = <7>; + power-supply = <®_5v2>; /* 3V3_BACKLIGHT */ + }; + + chosen { + stdout-path = &uart4; + }; + + led-act { + compatible = "gpio-leds"; + + led-green { + label = "mc1:green:act"; + gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; + + led-rgb { + compatible = "pwm-leds"; + + led-red { + label = "mc1:red:rgb"; + pwms = <&leds_pwm 1 1000000 0>; + max-brightness = <255>; + active-low; + }; + + led-green { + label = "mc1:green:rgb"; + pwms = <&leds_pwm 2 1000000 0>; + max-brightness = <255>; + active-low; + }; + + led-blue { + label = "mc1:blue:rgb"; + pwms = <&leds_pwm 3 1000000 0>; + max-brightness = <255>; + active-low; + }; + }; + + panel: panel { + compatible = "edt,etm0700g0edh6", "simple-panel"; + backlight = <&backlight>; + enable-gpios = <&gpiod 4 GPIO_ACTIVE_HIGH>; + power-supply = <®_3v3>; + + port { + panel_input: endpoint { + remote-endpoint = <<dc_ep0_out>; + }; + }; + }; + + reg_3v3: regulator_3v3 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <&v3v3>; + }; + + /* supplied by either debug board or PoE */ + reg_5v2: regulator_5v2 { + compatible = "regulator-fixed"; + regulator-name = "5V2"; + regulator-min-microvolt = <5200000>; + regulator-max-microvolt = <5200000>; + regulator-always-on; + }; +}; + +ðernet0 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <ðernet0_rgmii_pins_b>; + pinctrl-1 = <ðernet0_rgmii_sleep_pins_b>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy>; + status = "okay"; + + mdio0 { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@3 { /* KSZ9031RN */ + reg = <3>; + reset-gpios = <&gpiog 0 GPIO_ACTIVE_LOW>; /* ETH_RST# */ + interrupt-parent = <&gpioa>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; /* ETH_MDINT# */ + rxc-skew-ps = <1860>; + txc-skew-ps = <1860>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; + micrel,force-master; + }; + }; +}; + +&gpioz { + gpio-line-names = "HWID0", "HWID1", "HWID2", "HWID3", "", "", + "HWID4", "HWID5"; +}; + +&i2c5 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c5_pins_b>; + pinctrl-1 = <&i2c5_sleep_pins_b>; + clock-frequency = <400000>; + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5x06"; + interrupt-parent = <&gpiod>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; /* TOUCH_INT# */ + vcc-supply = <®_3v3>; + reg = <0x38>; + reset-gpios = <&gpiof 8 GPIO_ACTIVE_LOW>; /* TOUCH_RESET# */ + touchscreen-size-x = <1792>; + touchscreen-size-y = <1024>; + wakeup-source; + }; +}; + +<dc { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <<dc_pins_c>; + pinctrl-1 = <<dc_sleep_pins_c>; + status = "okay"; + + port { + ltdc_ep0_out: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; + }; +}; + +&pmic { + regulators { + buck4-supply = <®_5v2>; /* VIN */ + ldo2-supply = <®_5v2>; /* PMIC_LDO25IN */ + ldo5-supply = <®_5v2>; /* PMIC_LDO25IN */ + boost-supply = <®_5v2>; /* PMIC_BSTIN */ + pwr_sw2-supply = <&bst_out>; /* PMIC_SWIN */ + }; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + bus-width = <4>; + cd-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>; + disable-wp; + no-1-8-v; + st,neg-edge; + vmmc-supply = <®_3v3>; + status = "okay"; +}; + +&sdmmc1_b4_pins_a { + /* + * board lacks external pull-ups on SDMMC lines. Class 10 SD refuses to + * work, thus enable internal pull-ups. + */ + pins1 { + /delete-property/ bias-disable; + bias-pull-up; + }; + pins2 { + /delete-property/ bias-disable; + bias-pull-up; + }; +}; + +&sdmmc2 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_b>; + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_b>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_b>; + bus-width = <8>; + no-1-8-v; + no-sd; + no-sdio; + non-removable; + st,neg-edge; + vmmc-supply = <®_3v3>; + status = "okay"; +}; + +&timers3 { + status = "okay"; + + backlight_pwm: pwm { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pwm3_pins_b>; + pinctrl-1 = <&pwm3_sleep_pins_b>; + status = "okay"; + }; +}; + +&timers5 { + status = "okay"; + + leds_pwm: pwm { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pwm5_pins_b>; + pinctrl-1 = <&pwm5_sleep_pins_b>; + status = "okay"; + }; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi new file mode 100644 index 000000000000..7c4bd615b311 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi @@ -0,0 +1,337 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (C) 2019-2020 Marek Vasut <marex@denx.de> + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + aliases { + serial0 = &uart4; + serial1 = &usart3; + serial2 = &uart8; + ethernet0 = ðernet0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + clk_ext_audio_codec: clock-codec { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + + display_bl: display-bl { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>; + default-brightness-level = <8>; + enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + ethernet_vio: vioregulator { + compatible = "regulator-fixed"; + regulator-name = "vio"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpiog 3 GPIO_ACTIVE_LOW>; + regulator-always-on; + regulator-boot-on; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #size-cells = <0>; + poll-interval = <20>; + + /* + * The EXTi IRQ line 3 is shared with touchscreen and ethernet, + * so mark this as polled GPIO key. + */ + button-0 { + label = "TA1-GPIO-A"; + linux,code = <KEY_A>; + gpios = <&gpiof 3 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #size-cells = <0>; + + button-1 { + label = "TA2-GPIO-B"; + linux,code = <KEY_B>; + gpios = <&gpiod 6 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + + button-2 { + label = "TA3-GPIO-C"; + linux,code = <KEY_C>; + gpios = <&gpioi 11 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + + button-3 { + label = "TA4-GPIO-D"; + linux,code = <KEY_D>; + gpios = <&gpiod 12 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + }; + + led { + compatible = "gpio-leds"; + + led-0 { + label = "green:led5"; + gpios = <&gpiog 2 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-1 { + label = "green:led6"; + gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-2 { + label = "green:led7"; + gpios = <&gpioi 2 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-3 { + label = "green:led8"; + gpios = <&gpioi 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + panel { + compatible = "edt,etm0700g0edh6"; + backlight = <&display_bl>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + + sound { + compatible = "audio-graph-card"; + routing = + "MIC_IN", "Capture", + "Capture", "Mic Bias", + "Playback", "HP_OUT"; + dais = <&sai2a_port &sai2b_port>; + status = "okay"; + }; +}; + +&cec { + pinctrl-names = "default"; + pinctrl-0 = <&cec_pins_a>; + status = "okay"; +}; + +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rmii_pins_a>; + pinctrl-1 = <ðernet0_rmii_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rmii"; + max-speed = <100>; + phy-handle = <&phy0>; + st,eth-ref-clk-sel; + phy-reset-gpios = <&gpioh 15 GPIO_ACTIVE_LOW>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy0: ethernet-phy@1 { + reg = <1>; + }; + }; +}; + +&i2c2 { /* Header X22 */ + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&i2c5 { /* Header X21 */ + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + #sound-dai-cells = <0>; + clocks = <&clk_ext_audio_codec>; + VDDA-supply = <&v3v3>; + VDDIO-supply = <&vdd>; + + sgtl5000_port: port { + #address-cells = <1>; + #size-cells = <0>; + + sgtl5000_tx_endpoint: endpoint@0 { + reg = <0>; + remote-endpoint = <&sai2a_endpoint>; + frame-master; + bitclock-master; + }; + + sgtl5000_rx_endpoint: endpoint@1 { + reg = <1>; + remote-endpoint = <&sai2b_endpoint>; + frame-master; + bitclock-master; + }; + }; + + }; + + polytouch@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&gpiog>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */ + linux,wakeup; + }; +}; + +<dc { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <<dc_pins_b>; + pinctrl-1 = <<dc_sleep_pins_b>; + status = "okay"; + + port { + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; +}; + +&sai2 { + clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>; + clock-names = "pclk", "x8k", "x11k"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sai2a_pins_b &sai2b_pins_b>; + pinctrl-1 = <&sai2a_sleep_pins_b &sai2b_sleep_pins_b>; + status = "okay"; + + sai2a: audio-controller@4400b004 { + #clock-cells = <0>; + dma-names = "tx"; + clocks = <&rcc SAI2_K>; + clock-names = "sai_ck"; + status = "okay"; + + sai2a_port: port { + sai2a_endpoint: endpoint { + remote-endpoint = <&sgtl5000_tx_endpoint>; + format = "i2s"; + mclk-fs = <512>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <16>; + }; + }; + }; + + sai2b: audio-controller@4400b024 { + dma-names = "rx"; + st,sync = <&sai2a 2>; + clocks = <&rcc SAI2_K>, <&sai2a>; + clock-names = "sai_ck", "MCLK"; + status = "okay"; + + sai2b_port: port { + sai2b_endpoint: endpoint { + remote-endpoint = <&sgtl5000_rx_endpoint>; + format = "i2s"; + mclk-fs = <512>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <16>; + }; + }; + }; +}; + +&timers2 { + /* spare dmas for other usage (un-delete to enable pwm capture) */ + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; + pwm2: pwm { + pinctrl-0 = <&pwm2_pins_a>; + pinctrl-names = "default"; + status = "okay"; + }; + timer@1 { + status = "okay"; + }; +}; + +&usart3 { + pinctrl-names = "default"; + pinctrl-0 = <&usart3_pins_a>; + status = "okay"; +}; + +&uart8 { + pinctrl-names = "default"; + pinctrl-0 = <&uart8_pins_a>; + status = "okay"; +}; + +&usbh_ehci { + phys = <&usbphyc_port0>; + status = "okay"; +}; + +&usbotg_hs { + dr_mode = "peripheral"; + phys = <&usbphyc_port1 0>; + phy-names = "usb2-phy"; + status = "okay"; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <&vdd_usb>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; +}; + +&usbphyc_port1 { + phy-supply = <&vdd_usb>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; +}; diff --git a/arch/arm/boot/dts/stm32mp157c-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi index f81dc3134135..ba905196fb54 100644 --- a/arch/arm/boot/dts/stm32mp157c-dhcom-som.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi @@ -1,11 +1,8 @@ // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* - * Copyright (C) 2019 Marek Vasut <marex@denx.de> + * Copyright (C) 2019-2020 Marek Vasut <marex@denx.de> */ -/dts-v1/; -#include "stm32mp157.dtsi" -#include "stm32mp15xc.dtsi" #include "stm32mp15-pinctrl.dtsi" #include "stm32mp15xxaa-pinctrl.dtsi" #include <dt-bindings/gpio/gpio.h> @@ -97,10 +94,6 @@ status = "okay"; }; -&gpu { - status = "okay"; -}; - &i2c4 { pinctrl-names = "default"; pinctrl-0 = <&i2c4_pins_a>; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi new file mode 100644 index 000000000000..930202742a3f --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi @@ -0,0 +1,401 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +/* + * Copyright (C) Linaro Ltd 2019 - All Rights Reserved + * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + * Copyright (C) 2020 Marek Vasut <marex@denx.de> + */ + +/* Avenger96 uses DHCOR SoM configured for 1V8 IO operation */ +#include "stm32mp15xx-dhcor-io1v8.dtsi" + +/ { + aliases { + ethernet0 = ðernet0; + mmc0 = &sdmmc1; + serial0 = &uart4; + serial1 = &uart7; + serial2 = &usart2; + spi0 = &qspi; + }; + + /* XTal Q1 */ + cec_clock: clk-cec-fixed { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7513_out>; + }; + }; + }; + + led { + compatible = "gpio-leds"; + led1 { + label = "green:user0"; + gpios = <&gpioz 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led2 { + label = "green:user1"; + gpios = <&gpiof 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led3 { + label = "green:user2"; + gpios = <&gpiog 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + + led4 { + label = "green:user3"; + gpios = <&gpiog 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + default-state = "off"; + panic-indicator; + }; + }; + + sd_switch: regulator-sd_switch { + compatible = "regulator-gpio"; + regulator-name = "sd_switch"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-type = "voltage"; + regulator-always-on; + + gpios = <&gpioi 5 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + states = <1800000 0x1>, + <2900000 0x0>; + }; + + sound { + compatible = "audio-graph-card"; + label = "STM32MP1-AV96-HDMI"; + dais = <&sai2a_port>; + status = "okay"; + }; + + wlan_pwr: regulator-wlan { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpioz 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&adc { + pinctrl-names = "default"; + pinctrl-0 = <&adc12_ain_pins_b>; + vdd-supply = <&vdd>; + vdda-supply = <&vdda>; + vref-supply = <&vdda>; + status = "okay"; + + adc1: adc@0 { + st,adc-channels = <0 1 6>; + st,min-sample-time-nsecs = <5000>; + status = "okay"; + }; + + adc2: adc@100 { + st,adc-channels = <0 1 2>; + st,min-sample-time-nsecs = <5000>; + status = "okay"; + }; +}; + +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rgmii_pins_c>; + pinctrl-1 = <ðernet0_rgmii_sleep_pins_c>; + pinctrl-names = "default", "sleep"; + phy-mode = "rgmii"; + max-speed = <1000>; + phy-handle = <&phy0>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>; + reset-delay-us = <1000>; + + phy0: ethernet-phy@7 { + reg = <7>; + + rxc-skew-ps = <1500>; + rxdv-skew-ps = <540>; + rxd0-skew-ps = <420>; + rxd1-skew-ps = <420>; + rxd2-skew-ps = <420>; + rxd3-skew-ps = <420>; + + txc-skew-ps = <1440>; + txen-skew-ps = <540>; + txd0-skew-ps = <420>; + txd1-skew-ps = <420>; + txd2-skew-ps = <420>; + txd3-skew-ps = <420>; + }; + }; +}; + +&i2c1 { /* X6 I2C1 */ + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_b>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; +}; + +&i2c2 { /* X6 I2C2 */ + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_c>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; +}; + +&i2c4 { + hdmi-transmitter@3d { + compatible = "adi,adv7513"; + reg = <0x3d>, <0x2d>, <0x4d>, <0x5d>; + reg-names = "main", "cec", "edid", "packet"; + clocks = <&cec_clock>; + clock-names = "cec"; + + avdd-supply = <&v3v3>; + dvdd-supply = <&v3v3>; + pvdd-supply = <&v3v3>; + dvdd-3v-supply = <&v3v3>; + bgvdd-supply = <&v3v3>; + + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpiog>; + + status = "okay"; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7513_in: endpoint { + remote-endpoint = <<dc_ep0_out>; + }; + }; + + port@1 { + reg = <1>; + adv7513_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + + port@2 { + reg = <2>; + adv7513_i2s0: endpoint { + remote-endpoint = <&sai2a_endpoint>; + }; + }; + }; + }; +}; + +<dc { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <<dc_pins_d>; + pinctrl-1 = <<dc_sleep_pins_d>; + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + ltdc_ep0_out: endpoint@0 { + reg = <0>; + remote-endpoint = <&adv7513_in>; + }; + }; +}; + +&sai2 { + clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sai2a_pins_c>; + pinctrl-1 = <&sai2a_sleep_pins_c>; + clock-names = "pclk", "x8k", "x11k"; + status = "okay"; + + sai2a: audio-controller@4400b004 { + #clock-cells = <0>; + dma-names = "tx"; + clocks = <&rcc SAI2_K>; + clock-names = "sai_ck"; + status = "okay"; + + sai2a_port: port { + sai2a_endpoint: endpoint { + remote-endpoint = <&adv7513_i2s0>; + format = "i2s"; + mclk-fs = <256>; + }; + }; + }; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_b>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_b>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_b>; + cd-gpios = <&gpioi 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + disable-wp; + st,sig-dir; + st,neg-edge; + st,use-ckin; + bus-width = <4>; + vmmc-supply = <&vdd_sd>; + vqmmc-supply = <&sd_switch>; + status = "okay"; +}; + +&sdmmc2 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_b>; + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_b>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_b>; + bus-width = <8>; + mmc-ddr-1_8v; + no-sd; + no-sdio; + non-removable; + st,neg-edge; + vmmc-supply = <&v3v3>; + vqmmc-supply = <&vdd_io>; + status = "okay"; +}; + +&sdmmc3 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc3_b4_pins_b>; + pinctrl-1 = <&sdmmc3_b4_od_pins_b>; + pinctrl-2 = <&sdmmc3_b4_sleep_pins_b>; + broken-cd; + non-removable; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&wlan_pwr>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + cs-gpios = <&gpioi 0 0>; + status = "disabled"; + /delete-property/dmas; + /delete-property/dma-names; +}; + +&uart4 { + /* On Low speed expansion header */ + label = "LS-UART1"; + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_b>; + status = "okay"; +}; + +&uart7 { + /* On Low speed expansion header */ + label = "LS-UART0"; + pinctrl-names = "default"; + pinctrl-0 = <&uart7_pins_a>; + status = "okay"; +}; + +/* Bluetooth */ +&usart2 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&usart2_pins_a>; + pinctrl-1 = <&usart2_sleep_pins_a>; + st,hw-flow-ctrl; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <3000000>; + shutdown-gpios = <&gpioz 6 GPIO_ACTIVE_HIGH>; + }; +}; + +&usbh_ehci { + phys = <&usbphyc_port0>; + phy-names = "usb"; + status = "okay"; +}; + +&usbotg_hs { + pinctrl-0 = <&usbotg_hs_pins_a>; + pinctrl-names = "default"; + phy-names = "usb2-phy"; + phys = <&usbphyc_port1 0>; + status = "okay"; + vbus-supply = <&vbus_otg>; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <&vdd_usb>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; +}; + +&usbphyc_port1 { + phy-supply = <&vdd_usb>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; +}; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-io1v8.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-io1v8.dtsi new file mode 100644 index 000000000000..75172314d7af --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-io1v8.dtsi @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +/* + * Copyright (C) Linaro Ltd 2019 - All Rights Reserved + * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + * Copyright (C) 2020 Marek Vasut <marex@denx.de> + */ + +/ { + /* Enpirion EP3A8LQI U2 on the DHCOR */ + vdd_io: regulator-buck-io { + compatible = "regulator-fixed"; + regulator-name = "buck-io"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd>; + }; +}; + +&pwr_regulators { + vdd-supply = <&vdd_io>; +}; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi new file mode 100644 index 000000000000..04fbb324a541 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi @@ -0,0 +1,209 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +/* + * Copyright (C) Linaro Ltd 2019 - All Rights Reserved + * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + * Copyright (C) 2020 Marek Vasut <marex@denx.de> + */ + +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxac-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/mfd/st,stpmic1.h> + +/ { + aliases { + spi0 = &qspi; + }; + + memory@c0000000 { + device_type = "memory"; + reg = <0xc0000000 0x40000000>; + }; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; + + pmic: stpmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + status = "okay"; + + regulators { + compatible = "st,stpmic1-regulators"; + + ldo1-supply = <&v3v3>; + ldo2-supply = <&v3v3>; + ldo3-supply = <&vdd_ddr>; + ldo5-supply = <&v3v3>; + ldo6-supply = <&v3v3>; + pwr_sw1-supply = <&bst_out>; + pwr_sw2-supply = <&bst_out>; + + vddcore: buck1 { + regulator-name = "vddcore"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd_ddr: buck2 { + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd: buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + v3v3: buck4 { + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-over-current-protection; + regulator-initial-mode = <0>; + }; + + vdda: ldo1 { + regulator-name = "vdda"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = <IT_CURLIM_LDO1 0>; + }; + + v2v8: ldo2 { + regulator-name = "v2v8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + interrupts = <IT_CURLIM_LDO2 0>; + }; + + vtt_ddr: ldo3 { + regulator-name = "vtt_ddr"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + regulator-over-current-protection; + }; + + vdd_usb: ldo4 { + regulator-name = "vdd_usb"; + interrupts = <IT_CURLIM_LDO4 0>; + }; + + vdd_sd: ldo5 { + regulator-name = "vdd_sd"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = <IT_CURLIM_LDO5 0>; + regulator-boot-on; + }; + + v1v8: ldo6 { + regulator-name = "v1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + interrupts = <IT_CURLIM_LDO6 0>; + regulator-enable-ramp-delay = <300000>; + }; + + vref_ddr: vref_ddr { + regulator-name = "vref_ddr"; + regulator-always-on; + }; + + bst_out: boost { + regulator-name = "bst_out"; + interrupts = <IT_OCP_BOOST 0>; + }; + + vbus_otg: pwr_sw1 { + regulator-name = "vbus_otg"; + interrupts = <IT_OCP_OTG 0>; + regulator-active-discharge = <1>; + }; + + vbus_sw: pwr_sw2 { + regulator-name = "vbus_sw"; + interrupts = <IT_OCP_SWOUT 0>; + regulator-active-discharge = <1>; + }; + }; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>; + interrupt-names = "onkey-falling", "onkey-rising"; + status = "okay"; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + status = "disabled"; + }; + }; + + eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +&pwr_regulators { + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; +}; + +&qspi { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>; + reg = <0x58003000 0x1000>, <0x70000000 0x200000>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + flash0: spi-flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-rx-bus-width = <4>; + spi-max-frequency = <108000000>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&rng1 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi index d946e0a02f5c..70db923a45f7 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi @@ -112,14 +112,18 @@ &cec { pinctrl-names = "default", "sleep"; pinctrl-0 = <&cec_pins_b>; - pinctrl-1 = <&cec_pins_sleep_b>; + pinctrl-1 = <&cec_sleep_pins_b>; + status = "okay"; +}; + +&dts { status = "okay"; }; ðernet0 { status = "okay"; pinctrl-0 = <ðernet0_rgmii_pins_a>; - pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>; + pinctrl-1 = <ðernet0_rgmii_sleep_pins_a>; pinctrl-names = "default", "sleep"; phy-mode = "rgmii-id"; max-speed = <1000>; @@ -137,13 +141,12 @@ &gpu { contiguous-area = <&gpu_reserved>; - status = "okay"; }; &i2c1 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c1_pins_a>; - pinctrl-1 = <&i2c1_pins_sleep_a>; + pinctrl-1 = <&i2c1_sleep_pins_a>; i2c-scl-rising-time-ns = <100>; i2c-scl-falling-time-ns = <7>; status = "okay"; @@ -218,7 +221,7 @@ &i2c4 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c4_pins_a>; - pinctrl-1 = <&i2c4_pins_sleep_a>; + pinctrl-1 = <&i2c4_sleep_pins_a>; i2c-scl-rising-time-ns = <185>; i2c-scl-falling-time-ns = <20>; clock-frequency = <400000>; @@ -367,7 +370,7 @@ clock-names = "pclk", "i2sclk", "x8k", "x11k"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2s2_pins_a>; - pinctrl-1 = <&i2s2_pins_sleep_a>; + pinctrl-1 = <&i2s2_sleep_pins_a>; status = "okay"; i2s2_port: port { @@ -391,13 +394,10 @@ <dc { pinctrl-names = "default", "sleep"; pinctrl-0 = <<dc_pins_a>; - pinctrl-1 = <<dc_pins_sleep_a>; + pinctrl-1 = <<dc_sleep_pins_a>; status = "okay"; port { - #address-cells = <1>; - #size-cells = <0>; - ltdc_ep0_out: endpoint@0 { reg = <0>; remote-endpoint = <&sii9022_in>; diff --git a/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi b/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi new file mode 100644 index 000000000000..713485a95795 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi @@ -0,0 +1,230 @@ +/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) */ +/* + * Copyright (C) 2020 STMicroelectronics - All Rights Reserved + * Copyright (C) 2020 Ahmad Fatoum, Pengutronix + */ + +#include "stm32mp15-pinctrl.dtsi" + +#include <dt-bindings/mfd/st,stpmic1.h> + +/ { + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mcuram2: mcuram2@10000000 { + compatible = "shared-dma-pool"; + reg = <0x10000000 0x40000>; + no-map; + }; + + vdev0vring0: vdev0vring0@10040000 { + compatible = "shared-dma-pool"; + reg = <0x10040000 0x1000>; + no-map; + }; + + vdev0vring1: vdev0vring1@10041000 { + compatible = "shared-dma-pool"; + reg = <0x10041000 0x1000>; + no-map; + }; + + vdev0buffer: vdev0buffer@10042000 { + compatible = "shared-dma-pool"; + reg = <0x10042000 0x4000>; + no-map; + }; + + mcuram: mcuram@30000000 { + compatible = "shared-dma-pool"; + reg = <0x30000000 0x40000>; + no-map; + }; + + retram: retram@38000000 { + compatible = "shared-dma-pool"; + reg = <0x38000000 0x10000>; + no-map; + }; + }; + + reg_sip_eeprom: regulator_eeprom { + compatible = "regulator-fixed"; + regulator-name = "sip_eeprom"; + regulator-always-on; + }; +}; + +&i2c4 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c4_pins_a>; + pinctrl-1 = <&i2c4_sleep_pins_a>; + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + + pmic: stpmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + + regulators { + compatible = "st,stpmic1-regulators"; + + ldo1-supply = <&v3v3>; + ldo6-supply = <&v3v3>; + pwr_sw1-supply = <&bst_out>; + + vddcore: buck1 { + regulator-name = "vddcore"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd_ddr: buck2 { + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd: buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + st,mask-reset; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + v3v3: buck4 { + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-over-current-protection; + regulator-initial-mode = <0>; + }; + + v1v8_audio: ldo1 { + regulator-name = "v1v8_audio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO1 0>; + + }; + + v3v3_hdmi: ldo2 { + regulator-name = "v3v3_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO2 0>; + + }; + + vtt_ddr: ldo3 { + regulator-name = "vtt_ddr"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + regulator-over-current-protection; + }; + + vdd_usb: ldo4 { + regulator-name = "vdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + interrupts = <IT_CURLIM_LDO4 0>; + }; + + vdda: ldo5 { + regulator-name = "vdda"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = <IT_CURLIM_LDO5 0>; + regulator-boot-on; + }; + + v1v2_hdmi: ldo6 { + regulator-name = "v1v2_hdmi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO6 0>; + + }; + + vref_ddr: vref_ddr { + regulator-name = "vref_ddr"; + regulator-always-on; + regulator-over-current-protection; + }; + + bst_out: boost { + regulator-name = "bst_out"; + interrupts = <IT_OCP_BOOST 0>; + }; + + vbus_otg: pwr_sw1 { + regulator-name = "vbus_otg"; + interrupts = <IT_OCP_OTG 0>; + regulator-active-discharge; + }; + + vbus_sw: pwr_sw2 { + regulator-name = "vbus_sw"; + interrupts = <IT_OCP_SWOUT 0>; + regulator-active-discharge; + }; + }; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>; + interrupt-names = "onkey-falling", "onkey-rising"; + }; + + pmic_watchdog: watchdog { + compatible = "st,stpmic1-wdt"; + status = "disabled"; + }; + }; + + sip_eeprom: eeprom@50 { + compatible = "atmel,24c32"; + vcc-supply = <®_sip_eeprom>; + reg = <0x50>; + }; +}; + +&ipcc { + status = "okay"; +}; + +&m4_rproc { + memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, + <&vdev0vring1>, <&vdev0buffer>; + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>; + mbox-names = "vq0", "vq1", "shutdown"; + interrupt-parent = <&exti>; + interrupts = <68 1>; + status = "okay"; +}; + +&rng1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime-emmc.dts new file mode 100644 index 000000000000..033cab3443f8 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime-emmc.dts @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2020 Olimex Ltd. + * Author: Stefan Mavrodiev <stefan@olimex.com> + */ + +#include "sun7i-a20-olinuxino-lime.dts" + +/ { + model = "Olimex A20-OLinuXino-LIME-eMMC"; + compatible = "olimex,a20-olinuxino-lime-emmc", "allwinner,sun7i-a20"; + + mmc2_pwrseq: pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>; + }; +}; + +&mmc2 { + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + bus-width = <4>; + non-removable; + mmc-pwrseq = <&mmc2_pwrseq>; + status = "okay"; + + emmc: emmc@0 { + reg = <0>; + compatible = "mmc-card"; + broken-hpi; + }; +}; diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index 655404d6d3a3..c010b27fdb6a 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -610,6 +610,16 @@ clock-names = "bus", "mod"; }; + msgbox: mailbox@1c17000 { + compatible = "allwinner,sun8i-a83t-msgbox", + "allwinner,sun6i-a31-msgbox"; + reg = <0x01c17000 0x1000>; + clocks = <&ccu CLK_BUS_MSGBOX>; + resets = <&ccu RST_BUS_MSGBOX>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + }; + usb_otg: usb@1c19000 { compatible = "allwinner,sun8i-a83t-musb", "allwinner,sun8i-a33-musb"; diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts index d277d043031b..4c6704e4c57e 100644 --- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts +++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts @@ -31,7 +31,7 @@ pwr_led { label = "bananapi-m2-zero:red:pwr"; - gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ + gpios = <&r_pio 0 10 GPIO_ACTIVE_LOW>; /* PL10 */ default-state = "on"; }; }; diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index e83aa6866e7e..4e89701df91f 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -112,6 +112,26 @@ }; }; + gpu_opp_table: gpu-opp-table { + compatible = "operating-points-v2"; + + opp-120000000 { + opp-hz = /bits/ 64 <120000000>; + }; + + opp-312000000 { + opp-hz = /bits/ 64 <312000000>; + }; + + opp-432000000 { + opp-hz = /bits/ 64 <432000000>; + }; + + opp-576000000 { + opp-hz = /bits/ 64 <576000000>; + }; + }; + pmu { compatible = "arm,cortex-a7-pmu"; interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, @@ -205,9 +225,7 @@ clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>; clock-names = "bus", "core"; resets = <&ccu RST_BUS_GPU>; - - assigned-clocks = <&ccu CLK_GPU>; - assigned-clock-rates = <384000000>; + operating-points-v2 = <&gpu_opp_table>; }; ths: thermal-sensor@1c25000 { diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index 01a5df9aa71b..22d533d18992 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -239,6 +239,16 @@ }; }; + msgbox: mailbox@1c17000 { + compatible = "allwinner,sun8i-h3-msgbox", + "allwinner,sun6i-a31-msgbox"; + reg = <0x01c17000 0x1000>; + clocks = <&ccu CLK_BUS_MSGBOX>; + resets = <&ccu RST_BUS_MSGBOX>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + }; + usb_otg: usb@1c19000 { compatible = "allwinner,sun8i-h3-musb"; reg = <0x01c19000 0x400>; diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index d3e032e7d21a..08be733ee2cd 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -46,8 +46,7 @@ avdd-dsi-csi-supply = <&avdd_1v2_reg>; panel@0 { - compatible = "panasonic,vvx10f004b00", - "simple-panel"; + compatible = "panasonic,vvx10f004b00"; reg = <0>; power-supply = <&avdd_lcd_reg>; diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index 8c2ee6e7d6f1..73361dbe2e43 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -1087,7 +1087,7 @@ }; panel: panel { - compatible = "lg,lp129qe", "simple-panel"; + compatible = "lg,lp129qe"; backlight = <&backlight>; ddc-i2c-bus = <&dpaux>; diff --git a/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts index 3c0f2681fcde..37ad508b61d9 100644 --- a/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts @@ -223,7 +223,7 @@ * edt,et057090dhu: EDT 5.7" LCD TFT * edt,et070080dh6: EDT 7.0" LCD TFT */ - compatible = "edt,et057090dhu", "simple-panel"; + compatible = "edt,et057090dhu"; backlight = <&backlight>; power-supply = <®_3v3>; }; diff --git a/arch/arm/boot/dts/tegra20-colibri-iris.dts b/arch/arm/boot/dts/tegra20-colibri-iris.dts index d8004d68efa0..af4740847769 100644 --- a/arch/arm/boot/dts/tegra20-colibri-iris.dts +++ b/arch/arm/boot/dts/tegra20-colibri-iris.dts @@ -205,7 +205,7 @@ * edt,et057090dhu: EDT 5.7" LCD TFT * edt,et070080dh6: EDT 7.0" LCD TFT */ - compatible = "edt,et057090dhu", "simple-panel"; + compatible = "edt,et057090dhu"; backlight = <&backlight>; power-supply = <®_3v3>; }; diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index 1d96d92b72a7..02cd67ea2503 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -665,7 +665,7 @@ }; panel: panel { - compatible = "auo,b101aw03", "simple-panel"; + compatible = "auo,b101aw03"; power-supply = <&vdd_pnl_reg>; enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/tegra20-medcom-wide.dts index cda5448c2ace..c73510cd501c 100644 --- a/arch/arm/boot/dts/tegra20-medcom-wide.dts +++ b/arch/arm/boot/dts/tegra20-medcom-wide.dts @@ -57,7 +57,7 @@ }; panel: panel { - compatible = "innolux,n156bge-l21", "simple-panel"; + compatible = "innolux,n156bge-l21"; power-supply = <&vdd_1v8_reg>, <&vdd_3v3_reg>; enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index be0ab9b84b9a..cce3a3fb82ed 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -604,7 +604,7 @@ }; panel: panel { - compatible = "samsung,ltn101nt05", "simple-panel"; + compatible = "samsung,ltn101nt05"; ddc-i2c-bus = <&lvds_ddc>; power-supply = <&vdd_pnl_reg>; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index f91441683aad..376ecb6435f4 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -826,7 +826,7 @@ }; panel: panel { - compatible = "chunghwa,claa101wa01a", "simple-panel"; + compatible = "chunghwa,claa101wa01a"; power-supply = <&vdd_pnl_reg>; enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index f44551e2d9d0..022649119821 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -611,7 +611,7 @@ }; panel: panel { - compatible = "chunghwa,claa101wa01a", "simple-panel"; + compatible = "chunghwa,claa101wa01a"; power-supply = <&vdd_pnl_reg>; enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts index 749fc6d1ff70..b39c26806bf2 100644 --- a/arch/arm/boot/dts/tegra30-apalis-eval.dts +++ b/arch/arm/boot/dts/tegra30-apalis-eval.dts @@ -195,7 +195,7 @@ * edt,et057090dhu: EDT 5.7" LCD TFT * edt,et070080dh6: EDT 7.0" LCD TFT */ - compatible = "edt,et057090dhu", "simple-panel"; + compatible = "edt,et057090dhu"; backlight = <&backlight>; power-supply = <®_3v3>; }; diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts index 0be50e881684..e29dca92ba0a 100644 --- a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts +++ b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts @@ -196,7 +196,7 @@ * edt,et057090dhu: EDT 5.7" LCD TFT * edt,et070080dh6: EDT 7.0" LCD TFT */ - compatible = "edt,et057090dhu", "simple-panel"; + compatible = "edt,et057090dhu"; backlight = <&backlight>; power-supply = <®_3v3>; }; diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index 45ef6002b225..6b6fd8a8058f 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -2,6 +2,8 @@ /dts-v1/; #include "tegra30.dtsi" +#include "tegra30-cpu-opp.dtsi" +#include "tegra30-cpu-opp-microvolt.dtsi" / { model = "NVIDIA Tegra30 Beaver evaluation board"; @@ -1806,9 +1808,14 @@ vddctrl_reg: vddctrl { regulator-name = "vdd_cpu,vdd_sys"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1250000>; + regulator-coupled-with = <&core_vdd_reg>; + regulator-coupled-max-spread = <300000>; + regulator-max-step-microvolt = <100000>; regulator-always-on; + + nvidia,tegra-cpu-regulator; }; vio_reg: vio { @@ -1868,17 +1875,22 @@ }; }; - tps62361@60 { + core_vdd_reg: tps62361@60 { compatible = "ti,tps62361"; reg = <0x60>; regulator-name = "tps62361-vout"; regulator-min-microvolt = <500000>; regulator-max-microvolt = <1500000>; + regulator-coupled-with = <&vddctrl_reg>; + regulator-coupled-max-spread = <300000>; + regulator-max-step-microvolt = <100000>; regulator-boot-on; regulator-always-on; ti,vsel0-state-high; ti,vsel1-state-high; + + nvidia,tegra-core-regulator; }; }; @@ -2120,4 +2132,26 @@ assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, <&tegra_car TEGRA30_CLK_EXTERN1>; }; + + cpus { + cpu0: cpu@0 { + cpu-supply = <&vddctrl_reg>; + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu@1 { + cpu-supply = <&vddctrl_reg>; + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu@2 { + cpu-supply = <&vddctrl_reg>; + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu@3 { + cpu-supply = <&vddctrl_reg>; + operating-points-v2 = <&cpu0_opp_table>; + }; + }; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index 4b4f49a49394..5ee5d141bd81 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -432,7 +432,7 @@ }; panel: panel { - compatible = "chunghwa,claa101wb01", "simple-panel"; + compatible = "chunghwa,claa101wb01"; ddc-i2c-bus = <&panelddc>; power-supply = <&vdd_pnl1_reg>; diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts index 5965150ecdd2..8e106e784dce 100644 --- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts @@ -159,7 +159,7 @@ * edt,et057090dhu: EDT 5.7" LCD TFT * edt,et070080dh6: EDT 7.0" LCD TFT */ - compatible = "edt,et057090dhu", "simple-panel"; + compatible = "edt,et057090dhu"; backlight = <&backlight>; power-supply = <®_3v3>; }; diff --git a/arch/arm/boot/dts/uniphier-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi index 06e7400d2940..b52957ccda0d 100644 --- a/arch/arm/boot/dts/uniphier-ld4.dtsi +++ b/arch/arm/boot/dts/uniphier-ld4.dtsi @@ -67,6 +67,8 @@ compatible = "socionext,uniphier-scssi"; status = "disabled"; reg = <0x54006000 0x100>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 39 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; diff --git a/arch/arm/boot/dts/uniphier-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ld6b-ref.dts index 60994b6e8b99..079cadc11e6c 100644 --- a/arch/arm/boot/dts/uniphier-ld6b-ref.dts +++ b/arch/arm/boot/dts/uniphier-ld6b-ref.dts @@ -29,6 +29,7 @@ i2c4 = &i2c4; i2c5 = &i2c5; i2c6 = &i2c6; + ethernet0 = ð }; memory@80000000 { diff --git a/arch/arm/boot/dts/uniphier-pro4-ace.dts b/arch/arm/boot/dts/uniphier-pro4-ace.dts index 92cc48dd86d0..64246fad325c 100644 --- a/arch/arm/boot/dts/uniphier-pro4-ace.dts +++ b/arch/arm/boot/dts/uniphier-pro4-ace.dts @@ -26,6 +26,7 @@ i2c3 = &i2c3; i2c5 = &i2c5; i2c6 = &i2c6; + ethernet0 = ð }; memory@80000000 { diff --git a/arch/arm/boot/dts/uniphier-pro4-ref.dts b/arch/arm/boot/dts/uniphier-pro4-ref.dts index 854f2eba3e72..181442c48532 100644 --- a/arch/arm/boot/dts/uniphier-pro4-ref.dts +++ b/arch/arm/boot/dts/uniphier-pro4-ref.dts @@ -29,6 +29,7 @@ i2c3 = &i2c3; i2c5 = &i2c5; i2c6 = &i2c6; + ethernet0 = ð }; memory@80000000 { diff --git a/arch/arm/boot/dts/uniphier-pro4-sanji.dts b/arch/arm/boot/dts/uniphier-pro4-sanji.dts index dda1a2f214a8..5396556dee58 100644 --- a/arch/arm/boot/dts/uniphier-pro4-sanji.dts +++ b/arch/arm/boot/dts/uniphier-pro4-sanji.dts @@ -25,6 +25,7 @@ i2c3 = &i2c3; i2c5 = &i2c5; i2c6 = &i2c6; + ethernet0 = ð }; memory@80000000 { diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi index 1c866f0306fc..a53b73ee93e9 100644 --- a/arch/arm/boot/dts/uniphier-pro4.dtsi +++ b/arch/arm/boot/dts/uniphier-pro4.dtsi @@ -75,6 +75,8 @@ compatible = "socionext,uniphier-scssi"; status = "disabled"; reg = <0x54006000 0x100>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 39 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; @@ -426,6 +428,14 @@ }; }; + xdmac: dma-controller@5fc10000 { + compatible = "socionext,uniphier-xdmac"; + reg = <0x5fc10000 0x5300>; + interrupts = <0 188 4>; + dma-channels = <16>; + #dma-cells = <2>; + }; + aidet: interrupt-controller@5fc20000 { compatible = "socionext,uniphier-pro4-aidet"; reg = <0x5fc20000 0x200>; diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi index 8f1ae0957f5f..feadb4a378eb 100644 --- a/arch/arm/boot/dts/uniphier-pro5.dtsi +++ b/arch/arm/boot/dts/uniphier-pro5.dtsi @@ -160,6 +160,8 @@ compatible = "socionext,uniphier-scssi"; status = "disabled"; reg = <0x54006000 0x100>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 39 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; @@ -171,6 +173,8 @@ compatible = "socionext,uniphier-scssi"; status = "disabled"; reg = <0x54006100 0x100>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 216 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; @@ -408,6 +412,14 @@ }; }; + xdmac: dma-controller@5fc10000 { + compatible = "socionext,uniphier-xdmac"; + reg = <0x5fc10000 0x5300>; + interrupts = <0 188 4>; + dma-channels = <16>; + #dma-cells = <2>; + }; + aidet: interrupt-controller@5fc20000 { compatible = "socionext,uniphier-pro5-aidet"; reg = <0x5fc20000 0x200>; diff --git a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts index e27fd4f2a569..8e9ac579aa9a 100644 --- a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts +++ b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts @@ -26,6 +26,7 @@ i2c4 = &i2c4; i2c5 = &i2c5; i2c6 = &i2c6; + ethernet0 = ð }; memory@80000000 { diff --git a/arch/arm/boot/dts/uniphier-pxs2-vodka.dts b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts index 23fe42b7408b..8eacc7bdecb7 100644 --- a/arch/arm/boot/dts/uniphier-pxs2-vodka.dts +++ b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts @@ -24,6 +24,7 @@ i2c4 = &i2c4; i2c5 = &i2c5; i2c6 = &i2c6; + ethernet0 = ð }; memory@80000000 { diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi index 2f2a24994c69..b0b15c97306b 100644 --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi @@ -173,6 +173,8 @@ compatible = "socionext,uniphier-scssi"; status = "disabled"; reg = <0x54006000 0x100>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 39 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; @@ -184,6 +186,8 @@ compatible = "socionext,uniphier-scssi"; status = "disabled"; reg = <0x54006100 0x100>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 216 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; @@ -508,6 +512,14 @@ }; }; + xdmac: dma-controller@5fc10000 { + compatible = "socionext,uniphier-xdmac"; + reg = <0x5fc10000 0x5300>; + interrupts = <0 188 4>; + dma-channels = <16>; + #dma-cells = <2>; + }; + aidet: interrupt-controller@5fc20000 { compatible = "socionext,uniphier-pxs2-aidet"; reg = <0x5fc20000 0x200>; diff --git a/arch/arm/boot/dts/uniphier-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi index 09992163e1f4..96a766deb8d1 100644 --- a/arch/arm/boot/dts/uniphier-sld8.dtsi +++ b/arch/arm/boot/dts/uniphier-sld8.dtsi @@ -67,6 +67,8 @@ compatible = "socionext,uniphier-scssi"; status = "disabled"; reg = <0x54006000 0x100>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 39 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index 5c183483ec3b..e6308fb76183 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -19,8 +19,162 @@ */ / { + v2m_fixed_3v3: fixed-regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + v2m_clk24mhz: clk24mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "v2m:clk24mhz"; + }; + + v2m_refclk1mhz: refclk1mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + clock-output-names = "v2m:refclk1mhz"; + }; + + v2m_refclk32khz: refclk32khz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "v2m:refclk32khz"; + }; + + leds { + compatible = "gpio-leds"; + + led-1 { + label = "v2m:green:user1"; + gpios = <&v2m_led_gpios 0 0>; + linux,default-trigger = "heartbeat"; + }; + + led-2 { + label = "v2m:green:user2"; + gpios = <&v2m_led_gpios 1 0>; + linux,default-trigger = "disk-activity"; + }; + + led-3 { + label = "v2m:green:user3"; + gpios = <&v2m_led_gpios 2 0>; + linux,default-trigger = "cpu0"; + }; + + led-4 { + label = "v2m:green:user4"; + gpios = <&v2m_led_gpios 3 0>; + linux,default-trigger = "cpu1"; + }; + + led-5 { + label = "v2m:green:user5"; + gpios = <&v2m_led_gpios 4 0>; + linux,default-trigger = "cpu2"; + }; + + led-6 { + label = "v2m:green:user6"; + gpios = <&v2m_led_gpios 5 0>; + linux,default-trigger = "cpu3"; + }; + + led-7 { + label = "v2m:green:user7"; + gpios = <&v2m_led_gpios 6 0>; + linux,default-trigger = "cpu4"; + }; + + led-8 { + label = "v2m:green:user8"; + gpios = <&v2m_led_gpios 7 0>; + linux,default-trigger = "cpu5"; + }; + }; + + mcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + oscclk0 { + /* MCC static memory clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <25000000 60000000>; + #clock-cells = <0>; + clock-output-names = "v2m:oscclk0"; + }; + + v2m_oscclk1: oscclk1 { + /* CLCD clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <23750000 65000000>; + #clock-cells = <0>; + clock-output-names = "v2m:oscclk1"; + }; + + v2m_oscclk2: oscclk2 { + /* IO FPGA peripheral clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 2>; + freq-range = <24000000 24000000>; + #clock-cells = <0>; + clock-output-names = "v2m:oscclk2"; + }; + + volt-vio { + /* Logic level voltage */ + compatible = "arm,vexpress-volt"; + arm,vexpress-sysreg,func = <2 0>; + regulator-name = "VIO"; + regulator-always-on; + label = "VIO"; + }; + + temp-mcc { + /* MCC internal operating temperature */ + compatible = "arm,vexpress-temp"; + arm,vexpress-sysreg,func = <4 0>; + label = "MCC"; + }; + + reset { + compatible = "arm,vexpress-reset"; + arm,vexpress-sysreg,func = <5 0>; + }; + + muxfpga { + compatible = "arm,vexpress-muxfpga"; + arm,vexpress-sysreg,func = <7 0>; + }; + + shutdown { + compatible = "arm,vexpress-shutdown"; + arm,vexpress-sysreg,func = <8 0>; + }; + + reboot { + compatible = "arm,vexpress-reboot"; + arm,vexpress-sysreg,func = <9 0>; + }; + + dvimode { + compatible = "arm,vexpress-dvimode"; + arm,vexpress-sysreg,func = <11 0>; + }; + }; + bus@8000000 { - motherboard { + motherboard-bus { model = "V2M-P1"; arm,hbi = <0x190>; arm,vexpress,site = <0>; @@ -31,7 +185,7 @@ #interrupt-cells = <1>; ranges; - nor_flash: flash@0,00000000 { + nor_flash: flash@0 { compatible = "arm,vexpress-flash", "cfi-flash"; reg = <0 0x00000000 0x04000000>, <4 0x00000000 0x04000000>; @@ -41,13 +195,13 @@ }; }; - psram@1,00000000 { + psram@100000000 { compatible = "arm,vexpress-psram", "mtd-ram"; reg = <1 0x00000000 0x02000000>; bank-width = <4>; }; - ethernet@2,02000000 { + ethernet@202000000 { compatible = "smsc,lan9118", "smsc,lan9115"; reg = <2 0x02000000 0x10000>; interrupts = <15>; @@ -59,14 +213,14 @@ vddvario-supply = <&v2m_fixed_3v3>; }; - usb@2,03000000 { + usb@203000000 { compatible = "nxp,usb-isp1761"; reg = <2 0x03000000 0x20000>; interrupts = <16>; port1-otg; }; - iofpga@3,00000000 { + iofpga-bus@300000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -162,7 +316,7 @@ clock-names = "KMIREFCLK", "apb_pclk"; }; - v2m_serial0: uart@90000 { + v2m_serial0: serial@90000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x090000 0x1000>; interrupts = <5>; @@ -170,7 +324,7 @@ clock-names = "uartclk", "apb_pclk"; }; - v2m_serial1: uart@a0000 { + v2m_serial1: serial@a0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0a0000 0x1000>; interrupts = <6>; @@ -178,7 +332,7 @@ clock-names = "uartclk", "apb_pclk"; }; - v2m_serial2: uart@b0000 { + v2m_serial2: serial@b0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0b0000 0x1000>; interrupts = <7>; @@ -186,7 +340,7 @@ clock-names = "uartclk", "apb_pclk"; }; - v2m_serial3: uart@c0000 { + v2m_serial3: serial@c0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0c0000 0x1000>; interrupts = <8>; @@ -282,160 +436,6 @@ }; }; }; - - v2m_fixed_3v3: fixed-regulator-0 { - compatible = "regulator-fixed"; - regulator-name = "3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - v2m_clk24mhz: clk24mhz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24000000>; - clock-output-names = "v2m:clk24mhz"; - }; - - v2m_refclk1mhz: refclk1mhz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <1000000>; - clock-output-names = "v2m:refclk1mhz"; - }; - - v2m_refclk32khz: refclk32khz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "v2m:refclk32khz"; - }; - - leds { - compatible = "gpio-leds"; - - user1 { - label = "v2m:green:user1"; - gpios = <&v2m_led_gpios 0 0>; - linux,default-trigger = "heartbeat"; - }; - - user2 { - label = "v2m:green:user2"; - gpios = <&v2m_led_gpios 1 0>; - linux,default-trigger = "mmc0"; - }; - - user3 { - label = "v2m:green:user3"; - gpios = <&v2m_led_gpios 2 0>; - linux,default-trigger = "cpu0"; - }; - - user4 { - label = "v2m:green:user4"; - gpios = <&v2m_led_gpios 3 0>; - linux,default-trigger = "cpu1"; - }; - - user5 { - label = "v2m:green:user5"; - gpios = <&v2m_led_gpios 4 0>; - linux,default-trigger = "cpu2"; - }; - - user6 { - label = "v2m:green:user6"; - gpios = <&v2m_led_gpios 5 0>; - linux,default-trigger = "cpu3"; - }; - - user7 { - label = "v2m:green:user7"; - gpios = <&v2m_led_gpios 6 0>; - linux,default-trigger = "cpu4"; - }; - - user8 { - label = "v2m:green:user8"; - gpios = <&v2m_led_gpios 7 0>; - linux,default-trigger = "cpu5"; - }; - }; - - mcc { - compatible = "arm,vexpress,config-bus"; - arm,vexpress,config-bridge = <&v2m_sysreg>; - - oscclk0 { - /* MCC static memory clock */ - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 0>; - freq-range = <25000000 60000000>; - #clock-cells = <0>; - clock-output-names = "v2m:oscclk0"; - }; - - v2m_oscclk1: oscclk1 { - /* CLCD clock */ - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 1>; - freq-range = <23750000 65000000>; - #clock-cells = <0>; - clock-output-names = "v2m:oscclk1"; - }; - - v2m_oscclk2: oscclk2 { - /* IO FPGA peripheral clock */ - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 2>; - freq-range = <24000000 24000000>; - #clock-cells = <0>; - clock-output-names = "v2m:oscclk2"; - }; - - volt-vio { - /* Logic level voltage */ - compatible = "arm,vexpress-volt"; - arm,vexpress-sysreg,func = <2 0>; - regulator-name = "VIO"; - regulator-always-on; - label = "VIO"; - }; - - temp-mcc { - /* MCC internal operating temperature */ - compatible = "arm,vexpress-temp"; - arm,vexpress-sysreg,func = <4 0>; - label = "MCC"; - }; - - reset { - compatible = "arm,vexpress-reset"; - arm,vexpress-sysreg,func = <5 0>; - }; - - muxfpga { - compatible = "arm,vexpress-muxfpga"; - arm,vexpress-sysreg,func = <7 0>; - }; - - shutdown { - compatible = "arm,vexpress-shutdown"; - arm,vexpress-sysreg,func = <8 0>; - }; - - reboot { - compatible = "arm,vexpress-reboot"; - arm,vexpress-sysreg,func = <9 0>; - }; - - dvimode { - compatible = "arm,vexpress-dvimode"; - arm,vexpress-sysreg,func = <11 0>; - }; - }; }; }; }; |