summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/tegra124-nyan.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/tegra124-nyan.dtsi')
-rw-r--r--arch/arm/boot/dts/tegra124-nyan.dtsi60
1 files changed, 30 insertions, 30 deletions
diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi
index 0710a600cc69..271505e0715f 100644
--- a/arch/arm/boot/dts/tegra124-nyan.dtsi
+++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
@@ -3,8 +3,8 @@
/ {
aliases {
- rtc0 = "/i2c@0,7000d000/pmic@40";
- rtc1 = "/rtc@0,7000e000";
+ rtc0 = "/i2c@7000d000/pmic@40";
+ rtc1 = "/rtc@7000e000";
serial0 = &uarta;
};
@@ -16,8 +16,8 @@
reg = <0x0 0x80000000 0x0 0x80000000>;
};
- host1x@0,50000000 {
- hdmi@0,54280000 {
+ host1x@50000000 {
+ hdmi@54280000 {
status = "okay";
vdd-supply = <&vdd_3v3_hdmi>;
@@ -29,29 +29,29 @@
<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
};
- sor@0,54540000 {
+ sor@54540000 {
status = "okay";
nvidia,dpaux = <&dpaux>;
nvidia,panel = <&panel>;
};
- dpaux@0,545c0000 {
+ dpaux@545c0000 {
vdd-supply = <&vdd_3v3_panel>;
status = "okay";
};
};
- serial@0,70006000 {
+ serial@70006000 {
/* Debug connector on the bottom of the board near SD card. */
status = "okay";
};
- pwm@0,7000a000 {
+ pwm@7000a000 {
status = "okay";
};
- i2c@0,7000c000 {
+ i2c@7000c000 {
status = "okay";
clock-frequency = <100000>;
@@ -72,7 +72,7 @@
};
};
- i2c@0,7000c400 {
+ i2c@7000c400 {
status = "okay";
clock-frequency = <100000>;
@@ -85,7 +85,7 @@
};
};
- i2c@0,7000c500 {
+ i2c@7000c500 {
status = "okay";
clock-frequency = <400000>;
@@ -95,12 +95,12 @@
};
};
- hdmi_ddc: i2c@0,7000c700 {
+ hdmi_ddc: i2c@7000c700 {
status = "okay";
clock-frequency = <100000>;
};
- i2c@0,7000d000 {
+ i2c@7000d000 {
status = "okay";
clock-frequency = <400000>;
@@ -301,7 +301,7 @@
};
};
- spi@0,7000d400 {
+ spi@7000d400 {
status = "okay";
cros_ec: cros-ec@0 {
@@ -342,7 +342,7 @@
};
};
- spi@0,7000da00 {
+ spi@7000da00 {
status = "okay";
spi-max-frequency = <25000000>;
@@ -353,7 +353,7 @@
};
};
- pmc@0,7000e400 {
+ pmc@7000e400 {
nvidia,invert-interrupt;
nvidia,suspend-mode = <0>;
nvidia,cpu-pwr-good-time = <500>;
@@ -364,16 +364,16 @@
nvidia,sys-clock-req-active-high;
};
- hda@0,70030000 {
+ hda@70030000 {
status = "okay";
};
- usb@0,70090000 {
- phys = <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */
- <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */
- <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */
- <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */
- <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */
+ usb@70090000 {
+ phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */
+ <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */
+ <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */
+ <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */
+ <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */
phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", "usb3-1";
avddio-pex-supply = <&vdd_1v05_run>;
@@ -388,7 +388,7 @@
status = "okay";
};
- padctl@0,7009f000 {
+ padctl@7009f000 {
status = "okay";
pads {
@@ -467,7 +467,7 @@
reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
};
- sdhci@0,700b0000 { /* WiFi/BT on this bus */
+ sdhci@700b0000 { /* WiFi/BT on this bus */
status = "okay";
bus-width = <4>;
no-1-8-v;
@@ -478,7 +478,7 @@
keep-power-in-suspend;
};
- sdhci@0,700b0400 { /* SD Card on this bus */
+ sdhci@700b0400 { /* SD Card on this bus */
status = "okay";
cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
@@ -487,7 +487,7 @@
vqmmc-supply = <&vddio_sdmmc3>;
};
- sdhci@0,700b0600 { /* eMMC on this bus */
+ sdhci@700b0600 { /* eMMC on this bus */
status = "okay";
bus-width = <8>;
no-1-8-v;
@@ -495,14 +495,14 @@
};
/* CPU DFLL clock */
- clock@0,70110000 {
+ clock@70110000 {
status = "disabled";
vdd-cpu-supply = <&vdd_cpu>;
nvidia,i2c-fs-rate = <400000>;
};
- ahub@0,70300000 {
- i2s@0,70301100 {
+ ahub@70300000 {
+ i2s@70301100 {
status = "okay";
};
};