diff options
Diffstat (limited to 'arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts')
| -rw-r--r-- | arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts | 115 |
1 files changed, 108 insertions, 7 deletions
diff --git a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts index 97352de91314..a0f7f461f48c 100644 --- a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts +++ b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts @@ -12,8 +12,8 @@ aliases { serial0 = &blsp1_uart1; - sdhc1 = &sdhc_1; /* SDC1 eMMC slot */ - sdhc2 = &sdhc_2; /* SDC2 SD card slot */ + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_2; /* SDC2 SD card slot */ }; chosen { @@ -30,6 +30,7 @@ pma8084_s1: s1 { regulator-min-microvolt = <675000>; regulator-max-microvolt = <1050000>; + regulator-always-on; }; pma8084_s2: s2 { @@ -115,6 +116,7 @@ pma8084_l12: l12 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; }; pma8084_l13: l13 { @@ -298,12 +300,26 @@ enable-active-high; }; + vreg_panel: panel-regulator { + compatible = "regulator-fixed"; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_en_pin>; + + regulator-name = "panel-vddr-reg"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + + gpio = <&pma8084_gpios 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + /delete-node/ vreg-boost; }; &soc { serial@f991e000 { - status = "ok"; + status = "okay"; }; gpio-keys { @@ -453,10 +469,20 @@ bias-pull-down; }; }; + + panel_te_pin: panel { + te { + pins = "gpio12"; + function = "mdp_vsync"; + + drive-strength = <2>; + bias-disable; + }; + }; }; sdhc_1: sdhci@f9824900 { - status = "ok"; + status = "okay"; vmmc-supply = <&pma8084_l20>; vqmmc-supply = <&pma8084_s4>; @@ -469,7 +495,7 @@ }; sdhc_2: sdhci@f9864900 { - status = "ok"; + status = "okay"; max-frequency = <100000000>; @@ -518,7 +544,7 @@ }; usb@f9a55000 { - status = "ok"; + status = "okay"; phys = <&usb_hs1_phy>; phy-select = <&tcsr 0xb000 0>; @@ -531,7 +557,7 @@ ulpi { phy@a { - status = "ok"; + status = "okay"; v1p8-supply = <&pma8084_l6>; v3p3-supply = <&pma8084_l24>; @@ -697,6 +723,64 @@ pinctrl-0 = <&fuelgauge_pin>; }; }; + + adreno@fdb00000 { + status = "ok"; + }; + + mdss@fd900000 { + status = "ok"; + + mdp@fd900000 { + status = "ok"; + }; + + dsi@fd922800 { + status = "ok"; + + vdda-supply = <&pma8084_l2>; + vdd-supply = <&pma8084_l22>; + vddio-supply = <&pma8084_l12>; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + port@1 { + endpoint { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; + }; + }; + }; + + panel: panel@0 { + reg = <0>; + compatible = "samsung,s6e3fa2"; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_te_pin &panel_rst_pin>; + + iovdd-supply = <&pma8084_lvs4>; + vddr-supply = <&vreg_panel>; + + reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>; + te-gpios = <&msmgpio 12 GPIO_ACTIVE_HIGH>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; + + dsi-phy@fd922a00 { + status = "ok"; + + vddio-supply = <&pma8084_l12>; + }; + }; }; &spmi_bus { @@ -726,6 +810,14 @@ power-source = <PMA8084_GPIO_S4>; }; + panel_en_pin: panel-en-pin { + pins = "gpio14"; + function = "normal"; + bias-pull-up; + power-source = <PMA8084_GPIO_S4>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + }; + wlan_sleep_clk_pin: wlan-sleep-clk-pin { pins = "gpio16"; function = "func2"; @@ -735,6 +827,15 @@ qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; }; + panel_rst_pin: panel-rst-pin { + pins = "gpio17"; + function = "normal"; + bias-disable; + power-source = <PMA8084_GPIO_S4>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + }; + + fuelgauge_pin: fuelgauge-int-pin { pins = "gpio21"; function = "normal"; |