diff options
Diffstat (limited to 'arch/arm/boot/dts/qcom-apq8084.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/qcom-apq8084.dtsi | 44 |
1 files changed, 23 insertions, 21 deletions
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index 0a0fb147ebb9..fa1852eed37b 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-apq8084.h> #include <dt-bindings/gpio/gpio.h> @@ -184,7 +185,7 @@ cpu-pmu { compatible = "qcom,krait-pmu"; - interrupts = <1 7 0xf04>; + interrupts = <GIC_PPI 7 0xf04>; }; clocks { @@ -203,10 +204,10 @@ timer { compatible = "arm,armv7-timer"; - interrupts = <1 2 0xf08>, - <1 3 0xf08>, - <1 4 0xf08>, - <1 1 0xf08>; + interrupts = <GIC_PPI 2 0xf08>, + <GIC_PPI 3 0xf08>, + <GIC_PPI 4 0xf08>, + <GIC_PPI 1 0xf08>; clock-frequency = <19200000>; }; @@ -253,12 +254,13 @@ tsens: thermal-sensor@fc4a8000 { compatible = "qcom,msm8974-tsens"; - reg = <0xfc4a8000 0x2000>; + reg = <0xfc4a9000 0x1000>, /* TM */ + <0xfc4a8000 0x1000>; /* SROT */ nvmem-cells = <&tsens_calib>, <&tsens_backup>; nvmem-cell-names = "calib", "calib_backup"; + #qcom,sensors = <11>; #thermal-sensor-cells = <1>; }; - timer@f9020000 { #address-cells = <1>; #size-cells = <1>; @@ -269,50 +271,50 @@ frame@f9021000 { frame-number = <0>; - interrupts = <0 8 0x4>, - <0 7 0x4>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; reg = <0xf9021000 0x1000>, <0xf9022000 0x1000>; }; frame@f9023000 { frame-number = <1>; - interrupts = <0 9 0x4>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; reg = <0xf9023000 0x1000>; status = "disabled"; }; frame@f9024000 { frame-number = <2>; - interrupts = <0 10 0x4>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; reg = <0xf9024000 0x1000>; status = "disabled"; }; frame@f9025000 { frame-number = <3>; - interrupts = <0 11 0x4>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; reg = <0xf9025000 0x1000>; status = "disabled"; }; frame@f9026000 { frame-number = <4>; - interrupts = <0 12 0x4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; reg = <0xf9026000 0x1000>; status = "disabled"; }; frame@f9027000 { frame-number = <5>; - interrupts = <0 13 0x4>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; reg = <0xf9027000 0x1000>; status = "disabled"; }; frame@f9028000 { frame-number = <6>; - interrupts = <0 14 0x4>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; reg = <0xf9028000 0x1000>; status = "disabled"; }; @@ -404,13 +406,13 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; - interrupts = <0 208 0>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; }; blsp2_uart2: serial@f995e000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf995e000 0x1000>; - interrupts = <0 114 0x0>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -420,7 +422,7 @@ compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; reg-names = "hc_mem", "core_mem"; - interrupts = <0 123 0>, <0 138 0>; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>, @@ -433,7 +435,7 @@ compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; reg-names = "hc_mem", "core_mem"; - interrupts = <0 125 0>, <0 221 0>; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>, @@ -449,7 +451,7 @@ <0xfc4cb000 0x1000>, <0xfc4ca000 0x1000>; interrupt-names = "periph_irq"; - interrupts = <0 190 0>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; qcom,ee = <0>; qcom,channel = <0>; #address-cells = <2>; @@ -463,7 +465,7 @@ compatible = "qcom,smd"; rpm { - interrupts = <0 168 1>; + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&apcs 8 0>; qcom,smd-edge = <15>; |