summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/mmp3-dell-ariel.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/mmp3-dell-ariel.dts')
-rw-r--r--arch/arm/boot/dts/mmp3-dell-ariel.dts94
1 files changed, 94 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/mmp3-dell-ariel.dts b/arch/arm/boot/dts/mmp3-dell-ariel.dts
new file mode 100644
index 000000000000..c1947b5a688d
--- /dev/null
+++ b/arch/arm/boot/dts/mmp3-dell-ariel.dts
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Dell Wyse 3020 a.k.a. "Ariel" a.k.a. Tx0D (T00D, T10D)
+ *
+ * Copyright (C) 2019 Lubomir Rintel <lkundrak@v3.sk>
+ */
+
+/dts-v1/;
+#include "mmp3.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "Dell Ariel";
+ compatible = "dell,wyse-ariel", "marvell,mmp3";
+
+ aliases {
+ serial2 = &uart3;
+ };
+
+ chosen {
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ ranges;
+ bootargs = "earlyprintk=ttyS2,115200 console=ttyS2,115200";
+ };
+
+ memory@0 {
+ linux,usable-memory = <0x0 0x7f600000>;
+ available = <0x7f700000 0x7ff00000 0x00000000 0x7f600000>;
+ reg = <0x0 0x80000000>;
+ device_type = "memory";
+ };
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&rtc {
+ status = "okay";
+};
+
+&usb_otg0 {
+ status = "okay";
+};
+
+&usb_otg_phy0 {
+ status = "okay";
+};
+
+&mmc3 {
+ status = "okay";
+ max-frequency = <50000000>;
+ status = "okay";
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-highspeed;
+};
+
+&twsi1 {
+ status = "okay";
+
+ rtc@68 {
+ compatible = "dallas,ds1338";
+ reg = <0x68>;
+ status = "okay";
+ };
+};
+
+&twsi3 {
+ status = "okay";
+};
+
+&twsi4 {
+ status = "okay";
+};
+
+&ssp3 {
+ status = "okay";
+ cs-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
+
+ firmware-flash@0 {
+ compatible = "st,m25p80", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+ m25p,fast-read;
+ };
+};
+
+&ssp4 {
+ cs-gpios = <&gpio 56 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};