summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/imx6ul-opos6uldev.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/imx6ul-opos6uldev.dts')
-rw-r--r--arch/arm/boot/dts/imx6ul-opos6uldev.dts382
1 files changed, 8 insertions, 374 deletions
diff --git a/arch/arm/boot/dts/imx6ul-opos6uldev.dts b/arch/arm/boot/dts/imx6ul-opos6uldev.dts
index 8ecdb9ad2b2e..375b98d7205a 100644
--- a/arch/arm/boot/dts/imx6ul-opos6uldev.dts
+++ b/arch/arm/boot/dts/imx6ul-opos6uldev.dts
@@ -1,293 +1,21 @@
-/*
- * Copyright 2017 Armadeus Systems <support@armadeus.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2017 Armadeus Systems <support@armadeus.com>
/dts-v1/;
#include "imx6ul-opos6ul.dtsi"
+#include "imx6ul-imx6ull-opos6uldev.dtsi"
/ {
- model = "Armadeus Systems OPOS6UL SoM on OPOS6ULDev board";
- compatible = "armadeus,opos6uldev", "armadeus,opos6ul", "fsl,imx6ul";
-
- chosen {
- stdout-path = &uart1;
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm3 0 191000>;
- brightness-levels = <0 4 8 16 32 64 128 255>;
- default-brightness-level = <7>;
- power-supply = <&reg_5v>;
- status = "okay";
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpio_keys>;
-
- user-button {
- label = "User button";
- gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_MISC>;
- wakeup-source;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- user-led {
- label = "User";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_led>;
- gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- };
- };
-
- onewire {
- compatible = "w1-gpio";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_w1>;
- gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
- };
-
- panel: panel {
- compatible = "armadeus,st0700-adapt";
- power-supply = <&reg_3v3>;
- backlight = <&backlight>;
-
- port {
- panel_in: endpoint {
- remote-endpoint = <&lcdif_out>;
- };
- };
- };
-
- reg_5v: regulator-5v {
- compatible = "regulator-fixed";
- regulator-name = "5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
- reg_usbotg1_vbus: regulator-usbotg1vbus {
- compatible = "regulator-fixed";
- regulator-name = "usbotg1vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbotg1_vbus>;
- gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- reg_usbotg2_vbus: regulator-usbotg2vbus {
- compatible = "regulator-fixed";
- regulator-name = "usbotg2vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbotg2_vbus>;
- gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-};
-
-&adc1 {
- vref-supply = <&reg_3v3>;
- status = "okay";
-};
-
-&can1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_flexcan1>;
- xceiver-supply = <&reg_5v>;
- status = "okay";
-};
-
-&can2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_flexcan2>;
- xceiver-supply = <&reg_5v>;
- status = "okay";
-};
-
-&ecspi4 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi4>;
- cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, <&gpio4 3 GPIO_ACTIVE_LOW>;
- status = "okay";
-
- spidev0: spi@0 {
- compatible = "spidev";
- reg = <0>;
- spi-max-frequency = <5000000>;
- };
-
- spidev1: spi@1 {
- compatible = "spidev";
- reg = <1>;
- spi-max-frequency = <5000000>;
- };
-};
-
-&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1>;
- clock_frequency = <400000>;
- status = "okay";
-};
-
-&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2>;
- clock_frequency = <400000>;
- status = "okay";
-};
-
-&lcdif {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcdif>;
- status = "okay";
-
- port {
- lcdif_out: endpoint {
- remote-endpoint = <&panel_in>;
- };
- };
-};
-
-&pwm3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pwm3>;
- status = "okay";
-};
-
-&snvs_pwrkey {
- status = "disabled";
-};
-
-&tsc {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_tsc>;
- xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
- measure-delay-time = <0xffff>;
- pre-charge-time = <0xffff>;
- status = "okay";
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
- status = "okay";
-};
-
-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
- status = "okay";
-};
-
-&usbotg1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbotg1_id>;
- vbus-supply = <&reg_usbotg1_vbus>;
- dr_mode = "otg";
- disable-over-current;
- status = "okay";
-};
-
-&usbotg2 {
- vbus-supply = <&reg_usbotg2_vbus>;
- dr_mode = "host";
- disable-over-current;
- status = "okay";
+ model = "Armadeus Systems OPOS6UL SoM (i.MX6UL) on OPOS6ULDev board";
+ compatible = "armadeus,imx6ul-opos6uldev", "armadeus,imx6ul-opos6ul", "fsl,imx6ul";
};
&iomuxc {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpios>;
+ pinctrl-0 = <&pinctrl_gpios>, <&pinctrl_tamper_gpios>;
- pinctrl_ecspi4: ecspi4grp {
+ pinctrl_tamper_gpios: tampergpiosgrp {
fsl,pins = <
- MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK 0x1b0b0
- MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI 0x1b0b0
- MX6UL_PAD_NAND_DATA06__ECSPI4_MISO 0x1b0b0
- MX6UL_PAD_NAND_DATA01__GPIO4_IO03 0x1b0b0
- MX6UL_PAD_NAND_DATA07__GPIO4_IO09 0x1b0b0
- >;
- };
-
- pinctrl_flexcan1: flexcan1grp {
- fsl,pins = <
- MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0
- MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0
- >;
- };
-
- pinctrl_flexcan2: flexcan2grp {
- fsl,pins = <
- MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x0b0b0
- MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x0b0b0
- >;
- };
-
- pinctrl_gpios: gpiosgrp {
- fsl,pins = <
- MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x0b0b0
- MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x0b0b0
- MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x0b0b0
- MX6UL_PAD_NAND_RE_B__GPIO4_IO00 0x0b0b0
- MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x0b0b0
- MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0b0b0
- MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0b0b0
- MX6UL_PAD_NAND_WE_B__GPIO4_IO01 0x0b0b0
MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x0b0b0
MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x0b0b0
MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x0b0b0
@@ -299,100 +27,6 @@
>;
};
- pinctrl_gpio_keys: gpiokeysgrp {
- fsl,pins = <
- MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x0b0b0
- >;
- };
-
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <
- MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
- MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
- >;
- };
-
- pinctrl_i2c2: i2c2grp {
- fsl,pins = <
- MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
- MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
- >;
- };
-
- pinctrl_lcdif: lcdifgrp {
- fsl,pins = <
- MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x100b1
- MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x100b1
- MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x100b1
- MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x100b1
- MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x100b1
- MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x100b1
- MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x100b1
- MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x100b1
- MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x100b1
- MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x100b1
- MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x100b1
- MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x100b1
- MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x100b1
- MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x100b1
- MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x100b1
- MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x100b1
- MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x100b1
- MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x100b1
- MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x100b1
- MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x100b1
- MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x100b1
- MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x100b1
- >;
- };
-
- pinctrl_led: ledgrp {
- fsl,pins = <
- MX6UL_PAD_LCD_RESET__GPIO3_IO04 0x0b0b0
- >;
- };
-
- pinctrl_pwm3: pwm3grp {
- fsl,pins = <
- MX6UL_PAD_NAND_ALE__PWM3_OUT 0x1b0b0
- >;
- };
-
- pinctrl_tsc: tscgrp {
- fsl,pins = <
- MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0
- MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0
- MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0
- MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0
- >;
- };
-
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
- MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
- >;
- };
-
- pinctrl_uart2: uart2grp {
- fsl,pins = <
- MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1
- MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1
- >;
- };
-
- pinctrl_usbotg1_id: usbotg1idgrp {
- fsl,pins = <
- MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x1b0b0
- >;
- };
-
- pinctrl_usbotg1_vbus: usbotg1vbusgrp {
- fsl,pins = <
- MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x1b0b0
- >;
- };
-
pinctrl_usbotg2_vbus: usbotg2vbusgrp {
fsl,pins = <
MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0