1 files changed, 65 insertions, 39 deletions

diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index 3530280f5150..f004913f7d80 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -65,8 +65,10 @@
 	};
 };
 
-&sata {
+&audmux {
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux_1>;
 };
 
 &ecspi1 {
@@ -83,11 +85,29 @@
 	};
 };
 
-&ssi1 {
-	fsl,mode = "i2s-slave";
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet_1>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio3 23 0>;
 	status = "okay";
 };
 
+&i2c1 {
+	status = "okay";
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1_1>;
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
@@ -103,28 +123,61 @@
 				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000
 				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0
 				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x80000000
+				MX6QDL_PAD_EIM_D23__GPIO3_IO23	0x80000000
 			>;
 		};
 	};
 };
 
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg_1>;
-	disable-over-current;
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&sata {
+	status = "okay";
+};
+
+&ssi1 {
+	fsl,mode = "i2s-slave";
 	status = "okay";
 };
 
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_1>;
+};
+
 &usbh1 {
 	status = "okay";
 };
 
-&fec {
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet_1>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio3 23 0>;
+	pinctrl-0 = <&pinctrl_usbotg_1>;
+	disable-over-current;
 	status = "okay";
 };
 
@@ -145,30 +198,3 @@
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
-
-&audmux {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux_1>;
-};
-
-&uart2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2_1>;
-};
-
-&i2c1 {
-	status = "okay";
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1_1>;
-
-	codec: sgtl5000@0a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks 201>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-};