diff options
Diffstat (limited to 'arch/arm/boot/dts/cros5250-common.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/cros5250-common.dtsi | 54 |
1 files changed, 20 insertions, 34 deletions
diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi index 62eceb4f0d3f..0a61bbb9102f 100644 --- a/arch/arm/boot/dts/cros5250-common.dtsi +++ b/arch/arm/boot/dts/cros5250-common.dtsi @@ -19,11 +19,19 @@ chosen { }; + pinctrl@11400000 { + /* + * Disabled pullups since external part has its own pullups and + * double-pulling gets us out of spec in some cases. + */ + i2c2_bus: i2c2-bus { + samsung,pin-pud = <0>; + }; + }; + i2c@12C60000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <378000>; - gpios = <&gpb3 0 2 3 0>, - <&gpb3 1 2 3 0>; max77686@09 { compatible = "maxim,max77686"; @@ -167,21 +175,12 @@ i2c@12C70000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <378000>; - gpios = <&gpb3 2 2 3 0>, - <&gpb3 3 2 3 0>; }; i2c@12C80000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; - /* - * Disabled pullups since external part has its own pullups and - * double-pulling gets us out of spec in some cases. - */ - gpios = <&gpa0 6 3 0 0>, - <&gpa0 7 3 0 0>; - hdmiddc@50 { compatible = "samsung,exynos5-hdmiddc"; reg = <0x50>; @@ -191,19 +190,16 @@ i2c@12C90000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; - gpios = <&gpa1 2 3 3 0>, - <&gpa1 3 3 3 0>; }; i2c@12CA0000 { - status = "disabled"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; }; i2c@12CB0000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; - gpios = <&gpa2 2 3 3 0>, - <&gpa2 3 3 3 0>; }; i2c@12CC0000 { @@ -213,8 +209,6 @@ i2c@12CD0000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; - gpios = <&gpb2 2 3 3 0>, - <&gpb2 3 3 3 0>; }; i2c@12CE0000 { @@ -236,15 +230,12 @@ samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>; slot@0 { reg = <0>; bus-width = <8>; - gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>, - <&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>, - <&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>, - <&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>, - <&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>; }; }; @@ -260,15 +251,13 @@ samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; slot@0 { reg = <0>; bus-width = <4>; - samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>; - wp-gpios = <&gpc2 1 0 0 3>; - gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>, - <&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>, - <&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>; + wp-gpios = <&gpc2 1 0>; }; }; @@ -281,11 +270,11 @@ samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; + /* See board-specific dts files for pin setup */ slot@0 { reg = <0>; bus-width = <4>; - /* See board-specific dts files for GPIOs */ }; }; @@ -294,9 +283,6 @@ }; spi_1: spi@12d30000 { - gpios = <&gpa2 4 2 3 0>, - <&gpa2 6 2 3 0>, - <&gpa2 7 2 3 0>; samsung,spi-src-clk = <0>; num-cs = <1>; }; @@ -306,7 +292,7 @@ }; hdmi { - hpd-gpio = <&gpx3 7 0xf 1 3>; + hpd-gpio = <&gpx3 7 0>; }; gpio-keys { @@ -314,7 +300,7 @@ power { label = "Power"; - gpios = <&gpx1 3 0 0x10000 0>; + gpios = <&gpx1 3 1>; linux,code = <116>; /* KEY_POWER */ gpio-key,wakeup; }; |