summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts')
-rw-r--r--arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts25
1 files changed, 8 insertions, 17 deletions
diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
index 1c24ac8019ba..c894c7c788a9 100644
--- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
@@ -18,9 +18,9 @@
compatible = "atmel,sama5d2-ptc_ek", "atmel,sama5d2", "atmel,sama5";
aliases {
- serial0 = &uart0;
- i2c0 = &i2c0;
- i2c1 = &i2c1;
+ serial0 = &uart0; /* DBGU */
+ i2c0 = &i2c0; /* mikroBUS 1 */
+ i2c1 = &i2c1; /* XPRO EXT1 */
i2c2 = &i2c2;
};
@@ -40,7 +40,7 @@
ahb {
usb0: gadget@300000 {
- atmel,vbus-gpio = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>;
+ atmel,vbus-gpio = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usba_vbus>;
status = "okay";
@@ -125,8 +125,6 @@
bus-width = <8>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sdmmc0_default>;
- non-removable;
- mmc-ddr-1_8v;
status = "okay";
};
@@ -184,7 +182,7 @@
pinctrl-0 = <&pinctrl_i2c0_default>;
pinctrl-1 = <&pinctrl_i2c0_gpio>;
sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
- scl-gpios = <&pioA PIN_PD22 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
};
@@ -193,20 +191,12 @@
status = "okay";
i2c2: i2c@600 {
- compatible = "atmel,sama5d2-i2c";
- reg = <0x600 0x200>;
- interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
dmas = <0>, <0>;
- dma-names = "tx", "rx";
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_flx0_default>;
pinctrl-1 = <&pinctrl_flx0_gpio>;
sda-gpios = <&pioA PIN_PB28 GPIO_ACTIVE_HIGH>;
- scl-gpios = <&pioA PIN_PB29 GPIO_ACTIVE_HIGH>;
- atmel,fifo-size = <16>;
+ scl-gpios = <&pioA PIN_PB29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
};
};
@@ -236,7 +226,7 @@
pinctrl-0 = <&pinctrl_i2c1_default>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
sda-gpios = <&pioA PIN_PC6 GPIO_ACTIVE_HIGH>;
- scl-gpios = <&pioA PIN_PC7 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pioA PIN_PC7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
at24@50 {
@@ -414,6 +404,7 @@
label = "PB_USER";
gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>;
linux,code = <0x104>;
+ wakeup-source;
};
};