diff options
Diffstat (limited to 'arch/arc/mm/cache.c')
| -rw-r--r-- | arch/arc/mm/cache.c | 44 |
1 files changed, 40 insertions, 4 deletions
diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c index 91e28d791d56..ff7ff6cbb811 100644 --- a/arch/arc/mm/cache.c +++ b/arch/arc/mm/cache.c @@ -253,6 +253,10 @@ void __cache_line_loop_v2(phys_addr_t paddr, unsigned long vaddr, } } +/* + * For ARC700 MMUv3 I-cache and D-cache flushes + * Also reused for HS38 aliasing I-cache configuration + */ static inline void __cache_line_loop_v3(phys_addr_t paddr, unsigned long vaddr, unsigned long sz, const int op) @@ -289,6 +293,16 @@ void __cache_line_loop_v3(phys_addr_t paddr, unsigned long vaddr, if (full_page) write_aux_reg(aux_tag, paddr); + /* + * This is technically for MMU v4, using the MMU v3 programming model + * Special work for HS38 aliasing I-cache configuratino with PAE40 + * - upper 8 bits of paddr need to be written into PTAG_HI + * - (and needs to be written before the lower 32 bits) + * Note that PTAG_HI is hoisted outside the line loop + */ + if (is_pae40_enabled() && op == OP_INV_IC) + write_aux_reg(ARC_REG_IC_PTAG_HI, (u64)paddr >> 32); + while (num_lines-- > 0) { if (!full_page) { write_aux_reg(aux_tag, paddr); @@ -301,11 +315,17 @@ void __cache_line_loop_v3(phys_addr_t paddr, unsigned long vaddr, } /* - * In HS38x (MMU v4), although icache is VIPT, only paddr is needed for cache - * maintenance ops (in IVIL reg), as long as icache doesn't alias. + * In HS38x (MMU v4), I-cache is VIPT (can alias), D-cache is PIPT + * Here's how cache ops are implemented + * + * - D-cache: only paddr needed (in DC_IVDL/DC_FLDL) + * - I-cache Non Aliasing: Despite VIPT, only paddr needed (in IC_IVIL) + * - I-cache Aliasing: Both vaddr and paddr needed (in IC_IVIL, IC_PTAG + * respectively, similar to MMU v3 programming model, hence + * __cache_line_loop_v3() is used) * - * For Aliasing icache, vaddr is also needed (in IVIL), while paddr is - * specified in PTAG (similar to MMU v3) + * If PAE40 is enabled, independent of aliasing considerations, the higher bits + * needs to be written into PTAG_HI */ static inline void __cache_line_loop_v4(phys_addr_t paddr, unsigned long vaddr, @@ -335,6 +355,22 @@ void __cache_line_loop_v4(phys_addr_t paddr, unsigned long vaddr, num_lines = DIV_ROUND_UP(sz, L1_CACHE_BYTES); + /* + * For HS38 PAE40 configuration + * - upper 8 bits of paddr need to be written into PTAG_HI + * - (and needs to be written before the lower 32 bits) + */ + if (is_pae40_enabled()) { + if (cacheop == OP_INV_IC) + /* + * Non aliasing I-cache in HS38, + * aliasing I-cache handled in __cache_line_loop_v3() + */ + write_aux_reg(ARC_REG_IC_PTAG_HI, (u64)paddr >> 32); + else + write_aux_reg(ARC_REG_DC_PTAG_HI, (u64)paddr >> 32); + } + while (num_lines-- > 0) { write_aux_reg(aux_cmd, paddr); paddr += L1_CACHE_BYTES; |