diff options
Diffstat (limited to 'arch/alpha/kernel/ptrace.c')
| -rw-r--r-- | arch/alpha/kernel/ptrace.c | 415 |
1 files changed, 415 insertions, 0 deletions
diff --git a/arch/alpha/kernel/ptrace.c b/arch/alpha/kernel/ptrace.c new file mode 100644 index 000000000000..d00583161574 --- /dev/null +++ b/arch/alpha/kernel/ptrace.c @@ -0,0 +1,415 @@ +/* ptrace.c */ +/* By Ross Biro 1/23/92 */ +/* edited by Linus Torvalds */ +/* mangled further by Bob Manson (manson@santafe.edu) */ +/* more mutilation by David Mosberger (davidm@azstarnet.com) */ + +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/smp.h> +#include <linux/smp_lock.h> +#include <linux/errno.h> +#include <linux/ptrace.h> +#include <linux/user.h> +#include <linux/slab.h> +#include <linux/security.h> + +#include <asm/uaccess.h> +#include <asm/pgtable.h> +#include <asm/system.h> +#include <asm/fpu.h> + +#include "proto.h" + +#define DEBUG DBG_MEM +#undef DEBUG + +#ifdef DEBUG +enum { + DBG_MEM = (1<<0), + DBG_BPT = (1<<1), + DBG_MEM_ALL = (1<<2) +}; +#define DBG(fac,args) {if ((fac) & DEBUG) printk args;} +#else +#define DBG(fac,args) +#endif + +#define BREAKINST 0x00000080 /* call_pal bpt */ + +/* + * does not yet catch signals sent when the child dies. + * in exit.c or in signal.c. + */ + +/* + * Processes always block with the following stack-layout: + * + * +================================+ <---- task + 2*PAGE_SIZE + * | PALcode saved frame (ps, pc, | ^ + * | gp, a0, a1, a2) | | + * +================================+ | struct pt_regs + * | | | + * | frame generated by SAVE_ALL | | + * | | v + * +================================+ + * | | ^ + * | frame saved by do_switch_stack | | struct switch_stack + * | | v + * +================================+ + */ + +/* + * The following table maps a register index into the stack offset at + * which the register is saved. Register indices are 0-31 for integer + * regs, 32-63 for fp regs, and 64 for the pc. Notice that sp and + * zero have no stack-slot and need to be treated specially (see + * get_reg/put_reg below). + */ +enum { + REG_R0 = 0, REG_F0 = 32, REG_FPCR = 63, REG_PC = 64 +}; + +static int regoff[] = { + PT_REG( r0), PT_REG( r1), PT_REG( r2), PT_REG( r3), + PT_REG( r4), PT_REG( r5), PT_REG( r6), PT_REG( r7), + PT_REG( r8), SW_REG( r9), SW_REG( r10), SW_REG( r11), + SW_REG( r12), SW_REG( r13), SW_REG( r14), SW_REG( r15), + PT_REG( r16), PT_REG( r17), PT_REG( r18), PT_REG( r19), + PT_REG( r20), PT_REG( r21), PT_REG( r22), PT_REG( r23), + PT_REG( r24), PT_REG( r25), PT_REG( r26), PT_REG( r27), + PT_REG( r28), PT_REG( gp), -1, -1, + SW_REG(fp[ 0]), SW_REG(fp[ 1]), SW_REG(fp[ 2]), SW_REG(fp[ 3]), + SW_REG(fp[ 4]), SW_REG(fp[ 5]), SW_REG(fp[ 6]), SW_REG(fp[ 7]), + SW_REG(fp[ 8]), SW_REG(fp[ 9]), SW_REG(fp[10]), SW_REG(fp[11]), + SW_REG(fp[12]), SW_REG(fp[13]), SW_REG(fp[14]), SW_REG(fp[15]), + SW_REG(fp[16]), SW_REG(fp[17]), SW_REG(fp[18]), SW_REG(fp[19]), + SW_REG(fp[20]), SW_REG(fp[21]), SW_REG(fp[22]), SW_REG(fp[23]), + SW_REG(fp[24]), SW_REG(fp[25]), SW_REG(fp[26]), SW_REG(fp[27]), + SW_REG(fp[28]), SW_REG(fp[29]), SW_REG(fp[30]), SW_REG(fp[31]), + PT_REG( pc) +}; + +static unsigned long zero; + +/* + * Get address of register REGNO in task TASK. + */ +static unsigned long * +get_reg_addr(struct task_struct * task, unsigned long regno) +{ + unsigned long *addr; + + if (regno == 30) { + addr = &task->thread_info->pcb.usp; + } else if (regno == 65) { + addr = &task->thread_info->pcb.unique; + } else if (regno == 31 || regno > 65) { + zero = 0; + addr = &zero; + } else { + addr = (void *)task->thread_info + regoff[regno]; + } + return addr; +} + +/* + * Get contents of register REGNO in task TASK. + */ +static unsigned long +get_reg(struct task_struct * task, unsigned long regno) +{ + /* Special hack for fpcr -- combine hardware and software bits. */ + if (regno == 63) { + unsigned long fpcr = *get_reg_addr(task, regno); + unsigned long swcr + = task->thread_info->ieee_state & IEEE_SW_MASK; + swcr = swcr_update_status(swcr, fpcr); + return fpcr | swcr; + } + return *get_reg_addr(task, regno); +} + +/* + * Write contents of register REGNO in task TASK. + */ +static int +put_reg(struct task_struct *task, unsigned long regno, unsigned long data) +{ + if (regno == 63) { + task->thread_info->ieee_state + = ((task->thread_info->ieee_state & ~IEEE_SW_MASK) + | (data & IEEE_SW_MASK)); + data = (data & FPCR_DYN_MASK) | ieee_swcr_to_fpcr(data); + } + *get_reg_addr(task, regno) = data; + return 0; +} + +static inline int +read_int(struct task_struct *task, unsigned long addr, int * data) +{ + int copied = access_process_vm(task, addr, data, sizeof(int), 0); + return (copied == sizeof(int)) ? 0 : -EIO; +} + +static inline int +write_int(struct task_struct *task, unsigned long addr, int data) +{ + int copied = access_process_vm(task, addr, &data, sizeof(int), 1); + return (copied == sizeof(int)) ? 0 : -EIO; +} + +/* + * Set breakpoint. + */ +int +ptrace_set_bpt(struct task_struct * child) +{ + int displ, i, res, reg_b, nsaved = 0; + unsigned int insn, op_code; + unsigned long pc; + + pc = get_reg(child, REG_PC); + res = read_int(child, pc, (int *) &insn); + if (res < 0) + return res; + + op_code = insn >> 26; + if (op_code >= 0x30) { + /* + * It's a branch: instead of trying to figure out + * whether the branch will be taken or not, we'll put + * a breakpoint at either location. This is simpler, + * more reliable, and probably not a whole lot slower + * than the alternative approach of emulating the + * branch (emulation can be tricky for fp branches). + */ + displ = ((s32)(insn << 11)) >> 9; + child->thread_info->bpt_addr[nsaved++] = pc + 4; + if (displ) /* guard against unoptimized code */ + child->thread_info->bpt_addr[nsaved++] + = pc + 4 + displ; + DBG(DBG_BPT, ("execing branch\n")); + } else if (op_code == 0x1a) { + reg_b = (insn >> 16) & 0x1f; + child->thread_info->bpt_addr[nsaved++] = get_reg(child, reg_b); + DBG(DBG_BPT, ("execing jump\n")); + } else { + child->thread_info->bpt_addr[nsaved++] = pc + 4; + DBG(DBG_BPT, ("execing normal insn\n")); + } + + /* install breakpoints: */ + for (i = 0; i < nsaved; ++i) { + res = read_int(child, child->thread_info->bpt_addr[i], + (int *) &insn); + if (res < 0) + return res; + child->thread_info->bpt_insn[i] = insn; + DBG(DBG_BPT, (" -> next_pc=%lx\n", + child->thread_info->bpt_addr[i])); + res = write_int(child, child->thread_info->bpt_addr[i], + BREAKINST); + if (res < 0) + return res; + } + child->thread_info->bpt_nsaved = nsaved; + return 0; +} + +/* + * Ensure no single-step breakpoint is pending. Returns non-zero + * value if child was being single-stepped. + */ +int +ptrace_cancel_bpt(struct task_struct * child) +{ + int i, nsaved = child->thread_info->bpt_nsaved; + + child->thread_info->bpt_nsaved = 0; + + if (nsaved > 2) { + printk("ptrace_cancel_bpt: bogus nsaved: %d!\n", nsaved); + nsaved = 2; + } + + for (i = 0; i < nsaved; ++i) { + write_int(child, child->thread_info->bpt_addr[i], + child->thread_info->bpt_insn[i]); + } + return (nsaved != 0); +} + +/* + * Called by kernel/ptrace.c when detaching.. + * + * Make sure the single step bit is not set. + */ +void ptrace_disable(struct task_struct *child) +{ + ptrace_cancel_bpt(child); +} + +asmlinkage long +do_sys_ptrace(long request, long pid, long addr, long data, + struct pt_regs *regs) +{ + struct task_struct *child; + unsigned long tmp; + size_t copied; + long ret; + + lock_kernel(); + DBG(DBG_MEM, ("request=%ld pid=%ld addr=0x%lx data=0x%lx\n", + request, pid, addr, data)); + ret = -EPERM; + if (request == PTRACE_TRACEME) { + /* are we already being traced? */ + if (current->ptrace & PT_PTRACED) + goto out_notsk; + ret = security_ptrace(current->parent, current); + if (ret) + goto out_notsk; + /* set the ptrace bit in the process ptrace flags. */ + current->ptrace |= PT_PTRACED; + ret = 0; + goto out_notsk; + } + if (pid == 1) /* you may not mess with init */ + goto out_notsk; + + ret = -ESRCH; + read_lock(&tasklist_lock); + child = find_task_by_pid(pid); + if (child) + get_task_struct(child); + read_unlock(&tasklist_lock); + if (!child) + goto out_notsk; + + if (request == PTRACE_ATTACH) { + ret = ptrace_attach(child); + goto out; + } + + ret = ptrace_check_attach(child, request == PTRACE_KILL); + if (ret < 0) + goto out; + + switch (request) { + /* When I and D space are separate, these will need to be fixed. */ + case PTRACE_PEEKTEXT: /* read word at location addr. */ + case PTRACE_PEEKDATA: + copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0); + ret = -EIO; + if (copied != sizeof(tmp)) + break; + + regs->r0 = 0; /* special return: no errors */ + ret = tmp; + break; + + /* Read register number ADDR. */ + case PTRACE_PEEKUSR: + regs->r0 = 0; /* special return: no errors */ + ret = get_reg(child, addr); + DBG(DBG_MEM, ("peek $%ld->%#lx\n", addr, ret)); + break; + + /* When I and D space are separate, this will have to be fixed. */ + case PTRACE_POKETEXT: /* write the word at location addr. */ + case PTRACE_POKEDATA: + tmp = data; + copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 1); + ret = (copied == sizeof(tmp)) ? 0 : -EIO; + break; + + case PTRACE_POKEUSR: /* write the specified register */ + DBG(DBG_MEM, ("poke $%ld<-%#lx\n", addr, data)); + ret = put_reg(child, addr, data); + break; + + case PTRACE_SYSCALL: + /* continue and stop at next (return from) syscall */ + case PTRACE_CONT: /* restart after signal. */ + ret = -EIO; + if ((unsigned long) data > _NSIG) + break; + if (request == PTRACE_SYSCALL) + set_tsk_thread_flag(child, TIF_SYSCALL_TRACE); + else + clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); + child->exit_code = data; + /* make sure single-step breakpoint is gone. */ + ptrace_cancel_bpt(child); + wake_up_process(child); + ret = 0; + break; + + /* + * Make the child exit. Best I can do is send it a sigkill. + * perhaps it should be put in the status that it wants to + * exit. + */ + case PTRACE_KILL: + ret = 0; + if (child->exit_state == EXIT_ZOMBIE) + break; + child->exit_code = SIGKILL; + /* make sure single-step breakpoint is gone. */ + ptrace_cancel_bpt(child); + wake_up_process(child); + goto out; + + case PTRACE_SINGLESTEP: /* execute single instruction. */ + ret = -EIO; + if ((unsigned long) data > _NSIG) + break; + /* Mark single stepping. */ + child->thread_info->bpt_nsaved = -1; + clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); + child->exit_code = data; + wake_up_process(child); + /* give it a chance to run. */ + ret = 0; + goto out; + + case PTRACE_DETACH: /* detach a process that was attached. */ + ret = ptrace_detach(child, data); + goto out; + + default: + ret = ptrace_request(child, request, addr, data); + goto out; + } + out: + put_task_struct(child); + out_notsk: + unlock_kernel(); + return ret; +} + +asmlinkage void +syscall_trace(void) +{ + if (!test_thread_flag(TIF_SYSCALL_TRACE)) + return; + if (!(current->ptrace & PT_PTRACED)) + return; + /* The 0x80 provides a way for the tracing parent to distinguish + between a syscall stop and SIGTRAP delivery */ + ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) + ? 0x80 : 0)); + + /* + * This isn't the same as continuing with a signal, but it will do + * for normal use. strace only continues with a signal if the + * stopping signal is not SIGTRAP. -brl + */ + if (current->exit_code) { + send_sig(current->exit_code, current, 1); + current->exit_code = 0; + } +} |