diff options
Diffstat (limited to 'Makefile')
| -rw-r--r-- | Makefile | 215 |
1 files changed, 12 insertions, 203 deletions
@@ -337,7 +337,6 @@ AWK = awk GENKSYMS = scripts/genksyms/genksyms INSTALLKERNEL := installkernel DEPMOD = /sbin/depmod -KALLSYMS = scripts/kallsyms PERL = perl CHECK = sparse @@ -723,191 +722,21 @@ libs-y1 := $(patsubst %/, %/lib.a, $(libs-y)) libs-y2 := $(patsubst %/, %/built-in.o, $(libs-y)) libs-y := $(libs-y1) $(libs-y2) -# externally visible symbols +# Externally visible symbols (used by link-vmlinux.sh) export KBUILD_VMLINUX_INIT := $(head-y) $(init-y) export KBUILD_VMLINUX_MAIN := $(core-y) $(libs-y) $(drivers-y) $(net-y) export KBUILD_LDS := arch/$(SRCARCH)/kernel/vmlinux.lds +export LDFLAGS_vmlinux -# Build vmlinux -# --------------------------------------------------------------------------- -# vmlinux is built from the objects selected by $(vmlinux-init) and -# $(vmlinux-main). Most are built-in.o files from top-level directories -# in the kernel tree, others are specified in arch/$(ARCH)/Makefile. -# Ordering when linking is important, and $(vmlinux-init) must be first. -# -# vmlinux -# ^ -# | -# +-< $(vmlinux-init) -# | +--< init/version.o + more -# | -# +--< $(vmlinux-main) -# | +--< driver/built-in.o mm/built-in.o + more -# | -# +-< kallsyms.o (see description in CONFIG_KALLSYMS section) -# -# vmlinux version (uname -v) cannot be updated during normal -# descending-into-subdirs phase since we do not yet know if we need to -# update vmlinux. -# Therefore this step is delayed until just before final link of vmlinux - -# except in the kallsyms case where it is done just before adding the -# symbols to the kernel. -# -# System.map is generated to document addresses of all kernel symbols - -vmlinux-init := $(head-y) $(init-y) -vmlinux-main := $(core-y) $(libs-y) $(drivers-y) $(net-y) -vmlinux-all := $(vmlinux-init) $(vmlinux-main) -vmlinux-lds := arch/$(SRCARCH)/kernel/vmlinux.lds - -# Rule to link vmlinux - also used during CONFIG_KALLSYMS -# May be overridden by arch/$(ARCH)/Makefile -quiet_cmd_vmlinux__ ?= LD $@ - cmd_vmlinux__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) -o $@ \ - -T $(vmlinux-lds) $(vmlinux-init) \ - --start-group $(vmlinux-main) --end-group \ - $(filter-out $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) vmlinux.o FORCE ,$^) - -# Generate new vmlinux version -quiet_cmd_vmlinux_version = GEN .version - cmd_vmlinux_version = set -e; \ - if [ ! -r .version ]; then \ - rm -f .version; \ - echo 1 >.version; \ - else \ - mv .version .old_version; \ - expr 0$$(cat .old_version) + 1 >.version; \ - fi; \ - $(MAKE) $(build)=init - -# Generate System.map -quiet_cmd_sysmap = SYSMAP - cmd_sysmap = $(CONFIG_SHELL) $(srctree)/scripts/mksysmap - -# Link of vmlinux -# If CONFIG_KALLSYMS is set .version is already updated -# Generate System.map and verify that the content is consistent -# Use + in front of the vmlinux_version rule to silent warning with make -j2 -# First command is ':' to allow us to use + in front of the rule -define rule_vmlinux__ - : - $(if $(CONFIG_KALLSYMS),,+$(call cmd,vmlinux_version)) - - $(call cmd,vmlinux__) - $(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd - - $(Q)$(if $($(quiet)cmd_sysmap), \ - echo ' $($(quiet)cmd_sysmap) System.map' &&) \ - $(cmd_sysmap) $@ System.map; \ - if [ $$? -ne 0 ]; then \ - rm -f $@; \ - /bin/false; \ - fi; - $(verify_kallsyms) -endef - - -ifdef CONFIG_KALLSYMS -# Generate section listing all symbols and add it into vmlinux $(kallsyms.o) -# It's a three stage process: -# o .tmp_vmlinux1 has all symbols and sections, but __kallsyms is -# empty -# Running kallsyms on that gives us .tmp_kallsyms1.o with -# the right size - vmlinux version (uname -v) is updated during this step -# o .tmp_vmlinux2 now has a __kallsyms section of the right size, -# but due to the added section, some addresses have shifted. -# From here, we generate a correct .tmp_kallsyms2.o -# o The correct .tmp_kallsyms2.o is linked into the final vmlinux. -# o Verify that the System.map from vmlinux matches the map from -# .tmp_vmlinux2, just in case we did not generate kallsyms correctly. -# o If 'make KALLSYMS_EXTRA_PASS=1" was used, do an extra pass using -# .tmp_vmlinux3 and .tmp_kallsyms3.o. This is only meant as a -# temporary bypass to allow the kernel to be built while the -# maintainers work out what went wrong with kallsyms. - -last_kallsyms := 2 - -ifdef KALLSYMS_EXTRA_PASS -ifneq ($(KALLSYMS_EXTRA_PASS),0) -last_kallsyms := 3 -endif -endif - -kallsyms.o := .tmp_kallsyms$(last_kallsyms).o - -define verify_kallsyms - $(Q)$(if $($(quiet)cmd_sysmap), \ - echo ' $($(quiet)cmd_sysmap) .tmp_System.map' &&) \ - $(cmd_sysmap) .tmp_vmlinux$(last_kallsyms) .tmp_System.map - $(Q)cmp -s System.map .tmp_System.map || \ - (echo Inconsistent kallsyms data; \ - echo This is a bug - please report about it; \ - echo Try "make KALLSYMS_EXTRA_PASS=1" as a workaround; \ - rm .tmp_kallsyms* ; /bin/false ) -endef - -# Update vmlinux version before link -# Use + in front of this rule to silent warning about make -j1 -# First command is ':' to allow us to use + in front of this rule -cmd_ksym_ld = $(cmd_vmlinux__) -define rule_ksym_ld - : - +$(call cmd,vmlinux_version) - $(call cmd,vmlinux__) - $(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd -endef - -# Generate .S file with all kernel symbols -quiet_cmd_kallsyms = KSYM $@ - cmd_kallsyms = $(NM) -n $< | $(KALLSYMS) \ - $(if $(CONFIG_KALLSYMS_ALL),--all-symbols) > $@ - -.tmp_kallsyms1.o .tmp_kallsyms2.o .tmp_kallsyms3.o: %.o: %.S scripts FORCE - $(call if_changed_dep,as_o_S) +vmlinux-deps := $(KBUILD_LDS) $(KBUILD_VMLINUX_INIT) $(KBUILD_VMLINUX_MAIN) -.tmp_kallsyms%.S: .tmp_vmlinux% $(KALLSYMS) - $(call cmd,kallsyms) +# Final link of vmlinux + cmd_link-vmlinux = $(CONFIG_SHELL) $< $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) +quiet_cmd_link-vmlinux = LINK $@ -# .tmp_vmlinux1 must be complete except kallsyms, so update vmlinux version -.tmp_vmlinux1: $(vmlinux-lds) $(vmlinux-all) FORCE - $(call if_changed_rule,ksym_ld) - -.tmp_vmlinux2: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms1.o FORCE - $(call if_changed,vmlinux__) - -.tmp_vmlinux3: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms2.o FORCE - $(call if_changed,vmlinux__) - -# Needs to visit scripts/ before $(KALLSYMS) can be used. -$(KALLSYMS): scripts ; - -# Generate some data for debugging strange kallsyms problems -debug_kallsyms: .tmp_map$(last_kallsyms) - -.tmp_map%: .tmp_vmlinux% FORCE - ($(OBJDUMP) -h $< | $(AWK) '/^ +[0-9]/{print $$4 " 0 " $$2}'; $(NM) $<) | sort > $@ - -.tmp_map3: .tmp_map2 - -.tmp_map2: .tmp_map1 - -endif # ifdef CONFIG_KALLSYMS - -# Do modpost on a prelinked vmlinux. The finally linked vmlinux has -# relevant sections renamed as per the linker script. -quiet_cmd_vmlinux-modpost = LD $@ - cmd_vmlinux-modpost = $(LD) $(LDFLAGS) -r -o $@ \ - $(vmlinux-init) --start-group $(vmlinux-main) --end-group \ - $(filter-out $(vmlinux-init) $(vmlinux-main) FORCE ,$^) -define rule_vmlinux-modpost - : - +$(call cmd,vmlinux-modpost) - $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost $@ - $(Q)echo 'cmd_$@ := $(cmd_vmlinux-modpost)' > $(dot-target).cmd -endef - -# vmlinux image - including updated kernel symbols -vmlinux: $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) vmlinux.o $(kallsyms.o) FORCE +# Include targets which we want to +# execute if the rest of the kernel build went well. +vmlinux: scripts/link-vmlinux.sh $(vmlinux-deps) FORCE ifdef CONFIG_HEADERS_CHECK $(Q)$(MAKE) -f $(srctree)/Makefile headers_check endif @@ -917,22 +746,11 @@ endif ifdef CONFIG_BUILD_DOCSRC $(Q)$(MAKE) $(build)=Documentation endif - $(call vmlinux-modpost) - $(call if_changed_rule,vmlinux__) - $(Q)rm -f .old_version - -# build vmlinux.o first to catch section mismatch errors early -ifdef CONFIG_KALLSYMS -.tmp_vmlinux1: vmlinux.o -endif - -modpost-init := $(filter-out init/built-in.o, $(vmlinux-init)) -vmlinux.o: $(modpost-init) $(vmlinux-main) FORCE - $(call if_changed_rule,vmlinux-modpost) + +$(call if_changed,link-vmlinux) # The actual objects are generated when descending, # make sure no implicit rule kicks in -$(sort $(vmlinux-init) $(vmlinux-main)) $(vmlinux-lds): $(vmlinux-dirs) ; +$(sort $(vmlinux-deps)): $(vmlinux-dirs) ; # Handle descending into subdirectories listed in $(vmlinux-dirs) # Preset locale variables to speed up the build process. Limit locale @@ -1156,8 +974,6 @@ endif # CONFIG_MODULES # Directories & files removed with 'make clean' CLEAN_DIRS += $(MODVERDIR) -CLEAN_FILES += vmlinux System.map \ - .tmp_kallsyms* .tmp_version .tmp_vmlinux* .tmp_System.map # Directories & files removed with 'make mrproper' MRPROPER_DIRS += include/config usr/include include/generated \ @@ -1403,6 +1219,7 @@ scripts: ; endif # KBUILD_EXTMOD clean: $(clean-dirs) + $(Q)$(CONFIG_SHELL) $(srctree)/scripts/link-vmlinux.sh clean $(call cmd,rmdirs) $(call cmd,rmfiles) @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \ @@ -1536,14 +1353,6 @@ quiet_cmd_depmod = DEPMOD $(KERNELRELEASE) cmd_crmodverdir = $(Q)mkdir -p $(MODVERDIR) \ $(if $(KBUILD_MODULES),; rm -f $(MODVERDIR)/*) -a_flags = -Wp,-MD,$(depfile) $(KBUILD_AFLAGS) $(AFLAGS_KERNEL) \ - $(KBUILD_AFLAGS_KERNEL) \ - $(NOSTDINC_FLAGS) $(LINUXINCLUDE) $(KBUILD_CPPFLAGS) \ - $(modkern_aflags) $(EXTRA_AFLAGS) $(AFLAGS_$(basetarget).o) - -quiet_cmd_as_o_S = AS $@ -cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $< - # read all saved command lines targets := $(wildcard $(sort $(targets))) |