diff options
Diffstat (limited to 'Documentation')
51 files changed, 705 insertions, 755 deletions
diff --git a/Documentation/ABI/testing/sysfs-devices-deferred_probe b/Documentation/ABI/testing/sysfs-devices-deferred_probe deleted file mode 100644 index 58553d7a321f..000000000000 --- a/Documentation/ABI/testing/sysfs-devices-deferred_probe +++ /dev/null @@ -1,12 +0,0 @@ -What: /sys/devices/.../deferred_probe -Date: August 2016 -Contact: Ben Hutchings <ben.hutchings@codethink.co.uk> -Description: - The /sys/devices/.../deferred_probe attribute is - present for all devices. If a driver detects during - probing a device that a related device is not yet - ready, it may defer probing of the first device. The - kernel will retry probing the first device after any - other device is successfully probed. This attribute - reads as 1 if probing of this device is currently - deferred, or 0 otherwise. diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 21e2d8863705..be7c0d9506b1 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -106,6 +106,16 @@ use by PCI Format: <irq>,<irq>... + acpi_mask_gpe= [HW,ACPI] + Due to the existence of _Lxx/_Exx, some GPEs triggered + by unsupported hardware/firmware features can result in + GPE floodings that cannot be automatically disabled by + the GPE dispatcher. + This facility can be used to prevent such uncontrolled + GPE floodings. + Format: <int> + Support masking of GPEs numbered from 0x00 to 0x7f. + acpi_no_auto_serialize [HW,ACPI] Disable auto-serialization of AML methods AML control methods that contain the opcodes to create @@ -3811,10 +3821,11 @@ it if 0 is given (See Documentation/cgroup-v1/memory.txt) swiotlb= [ARM,IA-64,PPC,MIPS,X86] - Format: { <int> | force } + Format: { <int> | force | noforce } <int> -- Number of I/O TLB slabs force -- force using of bounce buffers even if they wouldn't be automatically used by the kernel + noforce -- Never use bounce buffers (for debugging) switches= [HW,M68k] diff --git a/Documentation/block/queue-sysfs.txt b/Documentation/block/queue-sysfs.txt index 51642159aedb..c0a3bb5a6e4e 100644 --- a/Documentation/block/queue-sysfs.txt +++ b/Documentation/block/queue-sysfs.txt @@ -54,9 +54,9 @@ This is the hardware sector size of the device, in bytes. io_poll (RW) ------------ -When read, this file shows the total number of block IO polls and how -many returned success. Writing '0' to this file will disable polling -for this device. Writing any non-zero value will enable this feature. +When read, this file shows whether polling is enabled (1) or disabled +(0). Writing '0' to this file will disable polling for this device. +Writing any non-zero value will enable this feature. io_poll_delay (RW) ------------------ diff --git a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt b/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt index e2768703ac2b..34c7fddcea39 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt +++ b/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt @@ -56,6 +56,18 @@ Required properties for V3D: - interrupts: The interrupt number See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt +Required properties for DSI: +- compatible: Should be "brcm,bcm2835-dsi0" or "brcm,bcm2835-dsi1" +- reg: Physical base address and length of the DSI block's registers +- interrupts: The interrupt number + See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt +- clocks: a) phy: The DSI PLL clock feeding the DSI analog PHY + b) escape: The DSI ESC clock from CPRMAN + c) pixel: The DSI pixel clock from CPRMAN +- clock-output-names: + The 3 clocks output from the DSI analog PHY: dsi[01]_byte, + dsi[01]_ddr2, and dsi[01]_ddr + [1] Documentation/devicetree/bindings/media/video-interfaces.txt Example: @@ -99,6 +111,29 @@ dpi: dpi@7e208000 { }; }; +dsi1: dsi@7e700000 { + compatible = "brcm,bcm2835-dsi1"; + reg = <0x7e700000 0x8c>; + interrupts = <2 12>; + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <1>; + + clocks = <&clocks BCM2835_PLLD_DSI1>, + <&clocks BCM2835_CLOCK_DSI1E>, + <&clocks BCM2835_CLOCK_DSI1P>; + clock-names = "phy", "escape", "pixel"; + + clock-output-names = "dsi1_byte", "dsi1_ddr2", "dsi1_ddr"; + + pitouchscreen: panel@0 { + compatible = "raspberrypi,touchscreen"; + reg = <0>; + + <...> + }; +}; + vec: vec@7e806000 { compatible = "brcm,bcm2835-vec"; reg = <0x7e806000 0x1000>; diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt index 6532a59c9b43..00ea670b8c4d 100644 --- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt @@ -38,10 +38,22 @@ The following input format properties are required except in "rgb 1x" and - adi,input-justification: The input bit justification ("left", "evenly", "right"). +- avdd-supply: A 1.8V supply that powers up the AVDD pin on the chip. +- dvdd-supply: A 1.8V supply that powers up the DVDD pin on the chip. +- pvdd-supply: A 1.8V supply that powers up the PVDD pin on the chip. +- dvdd-3v-supply: A 3.3V supply that powers up the pin called DVDD_3V + on the chip. +- bgvdd-supply: A 1.8V supply that powers up the BGVDD pin. This is + needed only for ADV7511. + The following properties are required for ADV7533: - adi,dsi-lanes: Number of DSI data lanes connected to the DSI host. It should be one of 1, 2, 3 or 4. +- a2vdd-supply: 1.8V supply that powers up the A2VDD pin on the chip. +- v3p3-supply: A 3.3V supply that powers up the V3P3 pin on the chip. +- v1p2-supply: A supply that powers up the V1P2 pin on the chip. It can be + either 1.2V or 1.8V. Optional properties: diff --git a/Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt b/Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt index 5e9a84d6e5f1..33bf981fbe33 100644 --- a/Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt +++ b/Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt @@ -1,52 +1,33 @@ -DesignWare HDMI bridge bindings - -Required properties: -- compatible: platform specific such as: - * "snps,dw-hdmi-tx" - * "fsl,imx6q-hdmi" - * "fsl,imx6dl-hdmi" - * "rockchip,rk3288-dw-hdmi" -- reg: Physical base address and length of the controller's registers. -- interrupts: The HDMI interrupt number -- clocks, clock-names : must have the phandles to the HDMI iahb and isfr clocks, - as described in Documentation/devicetree/bindings/clock/clock-bindings.txt, - the clocks are soc specific, the clock-names should be "iahb", "isfr" --port@[X]: SoC specific port nodes with endpoint definitions as defined - in Documentation/devicetree/bindings/media/video-interfaces.txt, - please refer to the SoC specific binding document: - * Documentation/devicetree/bindings/display/imx/hdmi.txt - * Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt - -Optional properties -- reg-io-width: the width of the reg:1,4, default set to 1 if not present -- ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing, - if the property is omitted, a functionally reduced I2C bus - controller on DW HDMI is probed -- clocks, clock-names: phandle to the HDMI CEC clock, name should be "cec" - -Example: - hdmi: hdmi@0120000 { - compatible = "fsl,imx6q-hdmi"; - reg = <0x00120000 0x9000>; - interrupts = <0 115 0x04>; - gpr = <&gpr>; - clocks = <&clks 123>, <&clks 124>; - clock-names = "iahb", "isfr"; - ddc-i2c-bus = <&i2c2>; - - port@0 { - reg = <0>; - - hdmi_mux_0: endpoint { - remote-endpoint = <&ipu1_di0_hdmi>; - }; - }; - - port@1 { - reg = <1>; - - hdmi_mux_1: endpoint { - remote-endpoint = <&ipu1_di1_hdmi>; - }; - }; - }; +Synopsys DesignWare HDMI TX Encoder +=================================== + +This document defines device tree properties for the Synopsys DesignWare HDMI +TX Encoder (DWC HDMI TX). It doesn't constitue a device tree binding +specification by itself but is meant to be referenced by platform-specific +device tree bindings. + +When referenced from platform device tree bindings the properties defined in +this document are defined as follows. The platform device tree bindings are +responsible for defining whether each property is required or optional. + +- reg: Memory mapped base address and length of the DWC HDMI TX registers. + +- reg-io-width: Width of the registers specified by the reg property. The + value is expressed in bytes and must be equal to 1 or 4 if specified. The + register width defaults to 1 if the property is not present. + +- interrupts: Reference to the DWC HDMI TX interrupt. + +- clocks: References to all the clocks specified in the clock-names property + as specified in Documentation/devicetree/bindings/clock/clock-bindings.txt. + +- clock-names: The DWC HDMI TX uses the following clocks. + + - "iahb" is the bus clock for either AHB and APB (mandatory). + - "isfr" is the internal register configuration clock (mandatory). + - "cec" is the HDMI CEC controller main clock (optional). + +- ports: The connectivity of the DWC HDMI TX with the rest of the system is + expressed in using ports as specified in the device graph bindings defined + in Documentation/devicetree/bindings/graph.txt. The numbering of the ports + is platform-specific. diff --git a/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt new file mode 100644 index 000000000000..6ec1a880ac18 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt @@ -0,0 +1,46 @@ +THS8135 Video DAC +----------------- + +This is the binding for Texas Instruments THS8135 Video DAC bridge. + +Required properties: + +- compatible: Must be "ti,ths8135" + +Required nodes: + +This device has two video ports. Their connections are modelled using the OF +graph bindings specified in Documentation/devicetree/bindings/graph.txt. + +- Video port 0 for RGB input +- Video port 1 for VGA output + +Example +------- + +vga-bridge { + compatible = "ti,ths8135"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + vga_bridge_in: endpoint { + remote-endpoint = <&lcdc_out_vga>; + }; + }; + + port@1 { + reg = <1>; + + vga_bridge_out: endpoint { + remote-endpoint = <&vga_con_in>; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt b/Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt index 38dc9d60eef8..305a0e72a900 100644 --- a/Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt +++ b/Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt @@ -16,7 +16,7 @@ Required properties: "clk_ade_core" for the ADE core clock. "clk_codec_jpeg" for the media NOC QoS clock, which use the same clock with jpeg codec. - "clk_ade_pix" for the ADE pixel clok. + "clk_ade_pix" for the ADE pixel clock. - assigned-clocks: Should contain "clk_ade_core" and "clk_codec_jpeg" clocks' phandle + clock-specifier pairs. - assigned-clock-rates: clock rates, one for each entry in assigned-clocks. diff --git a/Documentation/devicetree/bindings/display/imx/hdmi.txt b/Documentation/devicetree/bindings/display/imx/hdmi.txt index 1b756cf9afb0..66a8f86e5d12 100644 --- a/Documentation/devicetree/bindings/display/imx/hdmi.txt +++ b/Documentation/devicetree/bindings/display/imx/hdmi.txt @@ -1,29 +1,36 @@ -Device-Tree bindings for HDMI Transmitter +Freescale i.MX6 DWC HDMI TX Encoder +=================================== -HDMI Transmitter -================ +The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP +with a companion PHY IP. + +These DT bindings follow the Synopsys DWC HDMI TX bindings defined in +Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the +following device-specific properties. -The HDMI Transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP -with accompanying PHY IP. Required properties: - - #address-cells : should be <1> - - #size-cells : should be <0> - - compatible : should be "fsl,imx6q-hdmi" or "fsl,imx6dl-hdmi". - - gpr : should be <&gpr>. - The phandle points to the iomuxc-gpr region containing the HDMI - multiplexer control register. - - clocks, clock-names : phandles to the HDMI iahb and isrf clocks, as described - in Documentation/devicetree/bindings/clock/clock-bindings.txt and - Documentation/devicetree/bindings/clock/imx6q-clock.txt. - - port@[0-4]: Up to four port nodes with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt, - corresponding to the four inputs to the HDMI multiplexer. - -Optional properties: - - ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing - -example: + +- compatible : Shall be one of "fsl,imx6q-hdmi" or "fsl,imx6dl-hdmi". +- reg: See dw_hdmi.txt. +- interrupts: HDMI interrupt number +- clocks: See dw_hdmi.txt. +- clock-names: Shall contain "iahb" and "isfr" as defined in dw_hdmi.txt. +- ports: See dw_hdmi.txt. The DWC HDMI shall have between one and four ports, + numbered 0 to 3, corresponding to the four inputs of the HDMI multiplexer. + Each port shall have a single endpoint. +- gpr : Shall contain a phandle to the iomuxc-gpr region containing the HDMI + multiplexer control register. + +Optional properties + +- ddc-i2c-bus: The HDMI DDC bus can be connected to either a system I2C master + or the functionally-reduced I2C master contained in the DWC HDMI. When + connected to a system I2C master this property contains a phandle to that + I2C master controller. + + +Example: gpr: iomuxc-gpr@020e0000 { /* ... */ diff --git a/Documentation/devicetree/bindings/display/msm/gpu.txt b/Documentation/devicetree/bindings/display/msm/gpu.txt index 67d0a58dbb77..43fac0fe09bb 100644 --- a/Documentation/devicetree/bindings/display/msm/gpu.txt +++ b/Documentation/devicetree/bindings/display/msm/gpu.txt @@ -1,23 +1,19 @@ Qualcomm adreno/snapdragon GPU Required properties: -- compatible: "qcom,adreno-3xx" +- compatible: "qcom,adreno-XYZ.W", "qcom,adreno" + for example: "qcom,adreno-306.0", "qcom,adreno" + Note that you need to list the less specific "qcom,adreno" (since this + is what the device is matched on), in addition to the more specific + with the chip-id. - reg: Physical base address and length of the controller's registers. - interrupts: The interrupt signal from the gpu. - clocks: device clocks See ../clocks/clock-bindings.txt for details. - clock-names: the following clocks are required: - * "core_clk" - * "iface_clk" - * "mem_iface_clk" -- qcom,chipid: gpu chip-id. Note this may become optional for future - devices if we can reliably read the chipid from hw -- qcom,gpu-pwrlevels: list of operating points - - compatible: "qcom,gpu-pwrlevels" - - for each qcom,gpu-pwrlevel: - - qcom,gpu-freq: requested gpu clock speed - - NOTE: downstream android driver defines additional parameters to - configure memory bandwidth scaling per OPP. + * "core" + * "iface" + * "mem_iface" Example: @@ -25,28 +21,18 @@ Example: ... gpu: qcom,kgsl-3d0@4300000 { - compatible = "qcom,adreno-3xx"; + compatible = "qcom,adreno-320.2", "qcom,adreno"; reg = <0x04300000 0x20000>; reg-names = "kgsl_3d0_reg_memory"; interrupts = <GIC_SPI 80 0>; interrupt-names = "kgsl_3d0_irq"; clock-names = - "core_clk", - "iface_clk", - "mem_iface_clk"; + "core", + "iface", + "mem_iface"; clocks = <&mmcc GFX3D_CLK>, <&mmcc GFX3D_AHB_CLK>, <&mmcc MMSS_IMEM_AHB_CLK>; - qcom,chipid = <0x03020100>; - qcom,gpu-pwrlevels { - compatible = "qcom,gpu-pwrlevels"; - qcom,gpu-pwrlevel@0 { - qcom,gpu-freq = <450000000>; - }; - qcom,gpu-pwrlevel@1 { - qcom,gpu-freq = <27000000>; - }; - }; }; }; diff --git a/Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt b/Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt new file mode 100644 index 000000000000..eed48c3d4875 --- /dev/null +++ b/Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt @@ -0,0 +1,27 @@ +Multi-Inno MI0283QT display panel + +Required properties: +- compatible: "multi-inno,mi0283qt". + +The node for this driver must be a child node of a SPI controller, hence +all mandatory properties described in ../spi/spi-bus.txt must be specified. + +Optional properties: +- dc-gpios: D/C pin. The presence/absence of this GPIO determines + the panel interface mode (IM[3:0] pins): + - present: IM=x110 4-wire 8-bit data serial interface + - absent: IM=x101 3-wire 9-bit data serial interface +- reset-gpios: Reset pin +- power-supply: A regulator node for the supply voltage. +- backlight: phandle of the backlight device attached to the panel +- rotation: panel rotation in degrees counter clockwise (0,90,180,270) + +Example: + mi0283qt@0{ + compatible = "multi-inno,mi0283qt"; + reg = <0>; + spi-max-frequency = <32000000>; + rotation = <90>; + dc-gpios = <&gpio 25 0>; + backlight = <&backlight>; + }; diff --git a/Documentation/devicetree/bindings/display/panel/panel.txt b/Documentation/devicetree/bindings/display/panel/panel.txt new file mode 100644 index 000000000000..e2e6867852b8 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/panel.txt @@ -0,0 +1,4 @@ +Common display properties +------------------------- + +- rotation: Display rotation in degrees counter clockwise (0,90,180,270) diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt index 668091f27674..046076c6b277 100644 --- a/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt +++ b/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt @@ -1,24 +1,39 @@ -Rockchip specific extensions to the Synopsys Designware HDMI -================================ +Rockchip DWC HDMI TX Encoder +============================ + +The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP +with a companion PHY IP. + +These DT bindings follow the Synopsys DWC HDMI TX bindings defined in +Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the +following device-specific properties. + Required properties: -- compatible: "rockchip,rk3288-dw-hdmi"; -- reg: Physical base address and length of the controller's registers. -- clocks: phandle to hdmi iahb and isfr clocks. -- clock-names: should be "iahb" "isfr" -- rockchip,grf: this soc should set GRF regs to mux vopl/vopb. + +- compatible: Shall contain "rockchip,rk3288-dw-hdmi". +- reg: See dw_hdmi.txt. +- reg-io-width: See dw_hdmi.txt. Shall be 4. - interrupts: HDMI interrupt number -- ports: contain a port node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. For - vopb,set the reg = <0> and set the reg = <1> for vopl. -- reg-io-width: the width of the reg:1,4, the value should be 4 on - rk3288 platform +- clocks: See dw_hdmi.txt. +- clock-names: Shall contain "iahb" and "isfr" as defined in dw_hdmi.txt. +- ports: See dw_hdmi.txt. The DWC HDMI shall have a single port numbered 0 + corresponding to the video input of the controller. The port shall have two + endpoints, numbered 0 and 1, connected respectively to the vopb and vopl. +- rockchip,grf: Shall reference the GRF to mux vopl/vopb. Optional properties -- ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing -- clocks, clock-names: phandle to the HDMI CEC clock, name should be "cec" + +- ddc-i2c-bus: The HDMI DDC bus can be connected to either a system I2C master + or the functionally-reduced I2C master contained in the DWC HDMI. When + connected to a system I2C master this property contains a phandle to that + I2C master controller. +- clock-names: See dw_hdmi.txt. The "cec" clock is optional. +- clock-names: May contain "cec" as defined in dw_hdmi.txt. + Example: + hdmi: hdmi@ff980000 { compatible = "rockchip,rk3288-dw-hdmi"; reg = <0xff980000 0x20000>; diff --git a/Documentation/devicetree/bindings/display/zte,vou.txt b/Documentation/devicetree/bindings/display/zte,vou.txt index 740e5bd2e4f7..9c356284232b 100644 --- a/Documentation/devicetree/bindings/display/zte,vou.txt +++ b/Documentation/devicetree/bindings/display/zte,vou.txt @@ -49,6 +49,15 @@ Required properties: "osc_clk" "xclk" +* TV Encoder output device + +Required properties: + - compatible: should be "zte,zx296718-tvenc" + - reg: Physical base address and length of the TVENC device IO region + - zte,tvenc-power-control: the phandle to SYSCTRL block followed by two + integer cells. The first cell is the offset of SYSCTRL register used + to control TV Encoder DAC power, and the second cell is the bit mask. + Example: vou: vou@1440000 { @@ -81,4 +90,10 @@ vou: vou@1440000 { <&topcrm HDMI_XCLK>; clock-names = "osc_cec", "osc_clk", "xclk"; }; + + tvenc: tvenc@2000 { + compatible = "zte,zx296718-tvenc"; + reg = <0x2000 0x1000>; + zte,tvenc-power-control = <&sysctrl 0x170 0x10>; + }; }; diff --git a/Documentation/devicetree/bindings/i2c/i2c.txt b/Documentation/devicetree/bindings/i2c/i2c.txt index 5fa691e6f638..cee9d5055fa2 100644 --- a/Documentation/devicetree/bindings/i2c/i2c.txt +++ b/Documentation/devicetree/bindings/i2c/i2c.txt @@ -62,6 +62,9 @@ wants to support one of the below features, it should adapt the bindings below. "irq" and "wakeup" names are recognized by I2C core, other names are left to individual drivers. +- host-notify + device uses SMBus host notify protocol instead of interrupt line. + - multi-master states that there is another master active on this bus. The OS can use this information to adapt power management to keep the arbitration awake @@ -81,6 +84,11 @@ Binding may contain optional "interrupts" property, describing interrupts used by the device. I2C core will assign "irq" interrupt (or the very first interrupt if not using interrupt names) as primary interrupt for the slave. +Alternatively, devices supporting SMbus Host Notify, and connected to +adapters that support this feature, may use "host-notify" property. I2C +core will create a virtual interrupt for Host Notify and assign it as +primary interrupt for the slave. + Also, if device is marked as a wakeup source, I2C core will set up "wakeup" interrupt for the device. If "wakeup" interrupt name is not present in the binding, then primary interrupt will be used as wakeup interrupt. diff --git a/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt b/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt index 3e5b9793341f..8682ab6d4a50 100644 --- a/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt +++ b/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt @@ -8,8 +8,9 @@ This driver provides a simple power button event via an Interrupt. Required properties: - compatible: should be "ti,tps65217-pwrbutton" or "ti,tps65218-pwrbutton" -Required properties for TPS65218: +Required properties: - interrupts: should be one of the following + - <2>: For controllers compatible with tps65217 - <3 IRQ_TYPE_EDGE_BOTH>: For controllers compatible with tps65218 Examples: @@ -17,6 +18,7 @@ Examples: &tps { tps65217-pwrbutton { compatible = "ti,tps65217-pwrbutton"; + interrupts = <2>; }; }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt index 0dcb7c7d3e40..944657684d73 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt @@ -15,6 +15,9 @@ Properties: Second cell specifies the irq distribution mode to cores 0=Round Robin; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3 + The second cell in interrupts property is deprecated and may be ignored by + the kernel. + intc accessed via the special ARC AUX register interface, hence "reg" property is not specified. diff --git a/Documentation/devicetree/bindings/mtd/tango-nand.txt b/Documentation/devicetree/bindings/mtd/tango-nand.txt index ad5a02f2ac8c..cd1bf2ac9055 100644 --- a/Documentation/devicetree/bindings/mtd/tango-nand.txt +++ b/Documentation/devicetree/bindings/mtd/tango-nand.txt @@ -5,7 +5,7 @@ Required properties: - compatible: "sigma,smp8758-nand" - reg: address/size of nfc_reg, nfc_mem, and pbus_reg - dmas: reference to the DMA channel used by the controller -- dma-names: "nfc_sbox" +- dma-names: "rxtx" - clocks: reference to the system clock - #address-cells: <1> - #size-cells: <0> @@ -17,9 +17,9 @@ Example: nandc: nand-controller@2c000 { compatible = "sigma,smp8758-nand"; - reg = <0x2c000 0x30 0x2d000 0x800 0x20000 0x1000>; + reg = <0x2c000 0x30>, <0x2d000 0x800>, <0x20000 0x1000>; dmas = <&dma0 3>; - dma-names = "nfc_sbox"; + dma-names = "rxtx"; clocks = <&clkgen SYS_CLK>; #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt index c010fafc66a8..c7194e87d5f4 100644 --- a/Documentation/devicetree/bindings/net/mediatek-net.txt +++ b/Documentation/devicetree/bindings/net/mediatek-net.txt @@ -7,7 +7,7 @@ have dual GMAC each represented by a child node.. * Ethernet controller node Required properties: -- compatible: Should be "mediatek,mt7623-eth" +- compatible: Should be "mediatek,mt2701-eth" - reg: Address and length of the register set for the device - interrupts: Should contain the three frame engines interrupts in numeric order. These are fe_int0, fe_int1 and fe_int2. diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt index ff1bc4b1bb3b..fb5056b22685 100644 --- a/Documentation/devicetree/bindings/net/phy.txt +++ b/Documentation/devicetree/bindings/net/phy.txt @@ -19,8 +19,9 @@ Optional Properties: specifications. If neither of these are specified, the default is to assume clause 22. - If the phy's identifier is known then the list may contain an entry - of the form: "ethernet-phy-idAAAA.BBBB" where + If the PHY reports an incorrect ID (or none at all) then the + "compatible" list may contain an entry with the correct PHY ID in the + form: "ethernet-phy-idAAAA.BBBB" where AAAA - The value of the 16 bit Phy Identifier 1 register as 4 hex digits. This is the chip vendor OUI bits 3:18 BBBB - The value of the 16 bit Phy Identifier 2 register as diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.txt b/Documentation/devicetree/bindings/net/ti,dp83867.txt index 85bf945b898f..afe9630a5e7d 100644 --- a/Documentation/devicetree/bindings/net/ti,dp83867.txt +++ b/Documentation/devicetree/bindings/net/ti,dp83867.txt @@ -3,9 +3,11 @@ Required properties: - reg - The ID number for the phy, usually a small integer - ti,rx-internal-delay - RGMII Receive Clock Delay - see dt-bindings/net/ti-dp83867.h - for applicable values + for applicable values. Required only if interface type is + PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_RXID - ti,tx-internal-delay - RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h - for applicable values + for applicable values. Required only if interface type is + PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_TXID - ti,fifo-depth - Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h for applicable values diff --git a/Documentation/devicetree/bindings/power/supply/tps65217_charger.txt b/Documentation/devicetree/bindings/power/supply/tps65217_charger.txt index 98d131acee95..a11072c5a866 100644 --- a/Documentation/devicetree/bindings/power/supply/tps65217_charger.txt +++ b/Documentation/devicetree/bindings/power/supply/tps65217_charger.txt @@ -2,11 +2,16 @@ TPS65217 Charger Required Properties: -compatible: "ti,tps65217-charger" +-interrupts: TPS65217 interrupt numbers for the AC and USB charger input change. + Should be <0> for the USB charger and <1> for the AC adapter. +-interrupt-names: Should be "USB" and "AC" This node is a subnode of the tps65217 PMIC. Example: tps65217-charger { - compatible = "ti,tps65090-charger"; + compatible = "ti,tps65217-charger"; + interrupts = <0>, <1>; + interrupt-names = "USB", "AC"; }; diff --git a/Documentation/devicetree/bindings/spi/sh-msiof.txt b/Documentation/devicetree/bindings/spi/sh-msiof.txt index da6614c63796..dc975064fa27 100644 --- a/Documentation/devicetree/bindings/spi/sh-msiof.txt +++ b/Documentation/devicetree/bindings/spi/sh-msiof.txt @@ -1,17 +1,23 @@ Renesas MSIOF spi controller Required properties: -- compatible : "renesas,msiof-<soctype>" for SoCs, - "renesas,sh-msiof" for SuperH, or - "renesas,sh-mobile-msiof" for SH Mobile series. - Examples with soctypes are: - "renesas,msiof-r8a7790" (R-Car H2) +- compatible : "renesas,msiof-r8a7790" (R-Car H2) "renesas,msiof-r8a7791" (R-Car M2-W) "renesas,msiof-r8a7792" (R-Car V2H) "renesas,msiof-r8a7793" (R-Car M2-N) "renesas,msiof-r8a7794" (R-Car E2) "renesas,msiof-r8a7796" (R-Car M3-W) "renesas,msiof-sh73a0" (SH-Mobile AG5) + "renesas,sh-mobile-msiof" (generic SH-Mobile compatibile device) + "renesas,rcar-gen2-msiof" (generic R-Car Gen2 compatible device) + "renesas,rcar-gen3-msiof" (generic R-Car Gen3 compatible device) + "renesas,sh-msiof" (deprecated) + + When compatible with the generic version, nodes + must list the SoC-specific version corresponding + to the platform first followed by the generic + version. + - reg : A list of offsets and lengths of the register sets for the device. If only one register set is present, it is to be used @@ -61,7 +67,8 @@ Documentation/devicetree/bindings/pinctrl/renesas,*. Example: msiof0: spi@e6e20000 { - compatible = "renesas,msiof-r8a7791"; + compatible = "renesas,msiof-r8a7791", + "renesas,rcar-gen2-msiof"; reg = <0 0xe6e20000 0 0x0064>; interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 3e1de203a821..f98498df2365 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -187,6 +187,7 @@ mpl MPL AG mqmaker mqmaker Inc. msi Micro-Star International Co. Ltd. mti Imagination Technologies Ltd. (formerly MIPS Technologies Inc.) +multi-inno Multi-Inno Technology Co.,Ltd mundoreader Mundo Reader S.L. murata Murata Manufacturing Co., Ltd. mxicy Macronix International Co., Ltd. diff --git a/Documentation/dma-buf-sharing.txt b/Documentation/dma-buf-sharing.txt deleted file mode 100644 index ca44c5820585..000000000000 --- a/Documentation/dma-buf-sharing.txt +++ /dev/null @@ -1,482 +0,0 @@ - DMA Buffer Sharing API Guide - ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - - Sumit Semwal - <sumit dot semwal at linaro dot org> - <sumit dot semwal at ti dot com> - -This document serves as a guide to device-driver writers on what is the dma-buf -buffer sharing API, how to use it for exporting and using shared buffers. - -Any device driver which wishes to be a part of DMA buffer sharing, can do so as -either the 'exporter' of buffers, or the 'user' of buffers. - -Say a driver A wants to use buffers created by driver B, then we call B as the -exporter, and A as buffer-user. - -The exporter -- implements and manages operations[1] for the buffer -- allows other users to share the buffer by using dma_buf sharing APIs, -- manages the details of buffer allocation, -- decides about the actual backing storage where this allocation happens, -- takes care of any migration of scatterlist - for all (shared) users of this - buffer, - -The buffer-user -- is one of (many) sharing users of the buffer. -- doesn't need to worry about how the buffer is allocated, or where. -- needs a mechanism to get access to the scatterlist that makes up this buffer - in memory, mapped into its own address space, so it can access the same area - of memory. - -dma-buf operations for device dma only --------------------------------------- - -The dma_buf buffer sharing API usage contains the following steps: - -1. Exporter announces that it wishes to export a buffer -2. Userspace gets the file descriptor associated with the exported buffer, and - passes it around to potential buffer-users based on use case -3. Each buffer-user 'connects' itself to the buffer -4. When needed, buffer-user requests access to the buffer from exporter -5. When finished with its use, the buffer-user notifies end-of-DMA to exporter -6. when buffer-user is done using this buffer completely, it 'disconnects' - itself from the buffer. - - -1. Exporter's announcement of buffer export - - The buffer exporter announces its wish to export a buffer. In this, it - connects its own private buffer data, provides implementation for operations - that can be performed on the exported dma_buf, and flags for the file - associated with this buffer. All these fields are filled in struct - dma_buf_export_info, defined via the DEFINE_DMA_BUF_EXPORT_INFO macro. - - Interface: - DEFINE_DMA_BUF_EXPORT_INFO(exp_info) - struct dma_buf *dma_buf_export(struct dma_buf_export_info *exp_info) - - If this succeeds, dma_buf_export allocates a dma_buf structure, and - returns a pointer to the same. It also associates an anonymous file with this - buffer, so it can be exported. On failure to allocate the dma_buf object, - it returns NULL. - - 'exp_name' in struct dma_buf_export_info is the name of exporter - to - facilitate information while debugging. It is set to KBUILD_MODNAME by - default, so exporters don't have to provide a specific name, if they don't - wish to. - - DEFINE_DMA_BUF_EXPORT_INFO macro defines the struct dma_buf_export_info, - zeroes it out and pre-populates exp_name in it. - - -2. Userspace gets a handle to pass around to potential buffer-users - - Userspace entity requests for a file-descriptor (fd) which is a handle to the - anonymous file associated with the buffer. It can then share the fd with other - drivers and/or processes. - - Interface: - int dma_buf_fd(struct dma_buf *dmabuf, int flags) - - This API installs an fd for the anonymous file associated with this buffer; - returns either 'fd', or error. - -3. Each buffer-user 'connects' itself to the buffer - - Each buffer-user now gets a reference to the buffer, using the fd passed to - it. - - Interface: - struct dma_buf *dma_buf_get(int fd) - - This API will return a reference to the dma_buf, and increment refcount for - it. - - After this, the buffer-user needs to attach its device with the buffer, which - helps the exporter to know of device buffer constraints. - - Interface: - struct dma_buf_attachment *dma_buf_attach(struct dma_buf *dmabuf, - struct device *dev) - - This API returns reference to an attachment structure, which is then used - for scatterlist operations. It will optionally call the 'attach' dma_buf - operation, if provided by the exporter. - - The dma-buf sharing framework does the bookkeeping bits related to managing - the list of all attachments to a buffer. - -Until this stage, the buffer-exporter has the option to choose not to actually -allocate the backing storage for this buffer, but wait for the first buffer-user -to request use of buffer for allocation. - - -4. When needed, buffer-user requests access to the buffer - - Whenever a buffer-user wants to use the buffer for any DMA, it asks for - access to the buffer using dma_buf_map_attachment API. At least one attach to - the buffer must have happened before map_dma_buf can be called. - - Interface: - struct sg_table * dma_buf_map_attachment(struct dma_buf_attachment *, - enum dma_data_direction); - - This is a wrapper to dma_buf->ops->map_dma_buf operation, which hides the - "dma_buf->ops->" indirection from the users of this interface. - - In struct dma_buf_ops, map_dma_buf is defined as - struct sg_table * (*map_dma_buf)(struct dma_buf_attachment *, - enum dma_data_direction); - - It is one of the buffer operations that must be implemented by the exporter. - It should return the sg_table containing scatterlist for this buffer, mapped - into caller's address space. - - If this is being called for the first time, the exporter can now choose to - scan through the list of attachments for this buffer, collate the requirements - of the attached devices, and choose an appropriate backing storage for the - buffer. - - Based on enum dma_data_direction, it might be possible to have multiple users - accessing at the same time (for reading, maybe), or any other kind of sharing - that the exporter might wish to make available to buffer-users. - - map_dma_buf() operation can return -EINTR if it is interrupted by a signal. - - -5. When finished, the buffer-user notifies end-of-DMA to exporter - - Once the DMA for the current buffer-user is over, it signals 'end-of-DMA' to - the exporter using the dma_buf_unmap_attachment API. - - Interface: - void dma_buf_unmap_attachment(struct dma_buf_attachment *, - struct sg_table *); - - This is a wrapper to dma_buf->ops->unmap_dma_buf() operation, which hides the - "dma_buf->ops->" indirection from the users of this interface. - - In struct dma_buf_ops, unmap_dma_buf is defined as - void (*unmap_dma_buf)(struct dma_buf_attachment *, - struct sg_table *, - enum dma_data_direction); - - unmap_dma_buf signifies the end-of-DMA for the attachment provided. Like - map_dma_buf, this API also must be implemented by the exporter. - - -6. when buffer-user is done using this buffer, it 'disconnects' itself from the - buffer. - - After the buffer-user has no more interest in using this buffer, it should - disconnect itself from the buffer: - - - it first detaches itself from the buffer. - - Interface: - void dma_buf_detach(struct dma_buf *dmabuf, - struct dma_buf_attachment *dmabuf_attach); - - This API removes the attachment from the list in dmabuf, and optionally calls - dma_buf->ops->detach(), if provided by exporter, for any housekeeping bits. - - - Then, the buffer-user returns the buffer reference to exporter. - - Interface: - void dma_buf_put(struct dma_buf *dmabuf); - - This API then reduces the refcount for this buffer. - - If, as a result of this call, the refcount becomes 0, the 'release' file - operation related to this fd is called. It calls the dmabuf->ops->release() - operation in turn, and frees the memory allocated for dmabuf when exported. - -NOTES: -- Importance of attach-detach and {map,unmap}_dma_buf operation pairs - The attach-detach calls allow the exporter to figure out backing-storage - constraints for the currently-interested devices. This allows preferential - allocation, and/or migration of pages across different types of storage - available, if possible. - - Bracketing of DMA access with {map,unmap}_dma_buf operations is essential - to allow just-in-time backing of storage, and migration mid-way through a - use-case. - -- Migration of backing storage if needed - If after - - at least one map_dma_buf has happened, - - and the backing storage has been allocated for this buffer, - another new buffer-user intends to attach itself to this buffer, it might - be allowed, if possible for the exporter. - - In case it is allowed by the exporter: - if the new buffer-user has stricter 'backing-storage constraints', and the - exporter can handle these constraints, the exporter can just stall on the - map_dma_buf until all outstanding access is completed (as signalled by - unmap_dma_buf). - Once all users have finished accessing and have unmapped this buffer, the - exporter could potentially move the buffer to the stricter backing-storage, - and then allow further {map,unmap}_dma_buf operations from any buffer-user - from the migrated backing-storage. - - If the exporter cannot fulfill the backing-storage constraints of the new - buffer-user device as requested, dma_buf_attach() would return an error to - denote non-compatibility of the new buffer-sharing request with the current - buffer. - - If the exporter chooses not to allow an attach() operation once a - map_dma_buf() API has been called, it simply returns an error. - -Kernel cpu access to a dma-buf buffer object --------------------------------------------- - -The motivation to allow cpu access from the kernel to a dma-buf object from the -importers side are: -- fallback operations, e.g. if the devices is connected to a usb bus and the - kernel needs to shuffle the data around first before sending it away. -- full transparency for existing users on the importer side, i.e. userspace - should not notice the difference between a normal object from that subsystem - and an imported one backed by a dma-buf. This is really important for drm - opengl drivers that expect to still use all the existing upload/download - paths. - -Access to a dma_buf from the kernel context involves three steps: - -1. Prepare access, which invalidate any necessary caches and make the object - available for cpu access. -2. Access the object page-by-page with the dma_buf map apis -3. Finish access, which will flush any necessary cpu caches and free reserved - resources. - -1. Prepare access - - Before an importer can access a dma_buf object with the cpu from the kernel - context, it needs to notify the exporter of the access that is about to - happen. - - Interface: - int dma_buf_begin_cpu_access(struct dma_buf *dmabuf, - enum dma_data_direction direction) - - This allows the exporter to ensure that the memory is actually available for - cpu access - the exporter might need to allocate or swap-in and pin the - backing storage. The exporter also needs to ensure that cpu access is - coherent for the access direction. The direction can be used by the exporter - to optimize the cache flushing, i.e. access with a different direction (read - instead of write) might return stale or even bogus data (e.g. when the - exporter needs to copy the data to temporary storage). - - This step might fail, e.g. in oom conditions. - -2. Accessing the buffer - - To support dma_buf objects residing in highmem cpu access is page-based using - an api similar to kmap. Accessing a dma_buf is done in aligned chunks of - PAGE_SIZE size. Before accessing a chunk it needs to be mapped, which returns - a pointer in kernel virtual address space. Afterwards the chunk needs to be - unmapped again. There is no limit on how often a given chunk can be mapped - and unmapped, i.e. the importer does not need to call begin_cpu_access again - before mapping the same chunk again. - - Interfaces: - void *dma_buf_kmap(struct dma_buf *, unsigned long); - void dma_buf_kunmap(struct dma_buf *, unsigned long, void *); - - There are also atomic variants of these interfaces. Like for kmap they - facilitate non-blocking fast-paths. Neither the importer nor the exporter (in - the callback) is allowed to block when using these. - - Interfaces: - void *dma_buf_kmap_atomic(struct dma_buf *, unsigned long); - void dma_buf_kunmap_atomic(struct dma_buf *, unsigned long, void *); - - For importers all the restrictions of using kmap apply, like the limited - supply of kmap_atomic slots. Hence an importer shall only hold onto at most 2 - atomic dma_buf kmaps at the same time (in any given process context). - - dma_buf kmap calls outside of the range specified in begin_cpu_access are - undefined. If the range is not PAGE_SIZE aligned, kmap needs to succeed on - the partial chunks at the beginning and end but may return stale or bogus - data outside of the range (in these partial chunks). - - Note that these calls need to always succeed. The exporter needs to complete - any preparations that might fail in begin_cpu_access. - - For some cases the overhead of kmap can be too high, a vmap interface - is introduced. This interface should be used very carefully, as vmalloc - space is a limited resources on many architectures. - - Interfaces: - void *dma_buf_vmap(struct dma_buf *dmabuf) - void dma_buf_vunmap(struct dma_buf *dmabuf, void *vaddr) - - The vmap call can fail if there is no vmap support in the exporter, or if it - runs out of vmalloc space. Fallback to kmap should be implemented. Note that - the dma-buf layer keeps a reference count for all vmap access and calls down - into the exporter's vmap function only when no vmapping exists, and only - unmaps it once. Protection against concurrent vmap/vunmap calls is provided - by taking the dma_buf->lock mutex. - -3. Finish access - - When the importer is done accessing the CPU, it needs to announce this to - the exporter (to facilitate cache flushing and unpinning of any pinned - resources). The result of any dma_buf kmap calls after end_cpu_access is - undefined. - - Interface: - void dma_buf_end_cpu_access(struct dma_buf *dma_buf, - enum dma_data_direction dir); - - -Direct Userspace Access/mmap Support ------------------------------------- - -Being able to mmap an export dma-buf buffer object has 2 main use-cases: -- CPU fallback processing in a pipeline and -- supporting existing mmap interfaces in importers. - -1. CPU fallback processing in a pipeline - - In many processing pipelines it is sometimes required that the cpu can access - the data in a dma-buf (e.g. for thumbnail creation, snapshots, ...). To avoid - the need to handle this specially in userspace frameworks for buffer sharing - it's ideal if the dma_buf fd itself can be used to access the backing storage - from userspace using mmap. - - Furthermore Android's ION framework already supports this (and is otherwise - rather similar to dma-buf from a userspace consumer side with using fds as - handles, too). So it's beneficial to support this in a similar fashion on - dma-buf to have a good transition path for existing Android userspace. - - No special interfaces, userspace simply calls mmap on the dma-buf fd, making - sure that the cache synchronization ioctl (DMA_BUF_IOCTL_SYNC) is *always* - used when the access happens. Note that DMA_BUF_IOCTL_SYNC can fail with - -EAGAIN or -EINTR, in which case it must be restarted. - - Some systems might need some sort of cache coherency management e.g. when - CPU and GPU domains are being accessed through dma-buf at the same time. To - circumvent this problem there are begin/end coherency markers, that forward - directly to existing dma-buf device drivers vfunc hooks. Userspace can make - use of those markers through the DMA_BUF_IOCTL_SYNC ioctl. The sequence - would be used like following: - - mmap dma-buf fd - - for each drawing/upload cycle in CPU 1. SYNC_START ioctl, 2. read/write - to mmap area 3. SYNC_END ioctl. This can be repeated as often as you - want (with the new data being consumed by the GPU or say scanout device) - - munmap once you don't need the buffer any more - - For correctness and optimal performance, it is always required to use - SYNC_START and SYNC_END before and after, respectively, when accessing the - mapped address. Userspace cannot rely on coherent access, even when there - are systems where it just works without calling these ioctls. - -2. Supporting existing mmap interfaces in importers - - Similar to the motivation for kernel cpu access it is again important that - the userspace code of a given importing subsystem can use the same interfaces - with a imported dma-buf buffer object as with a native buffer object. This is - especially important for drm where the userspace part of contemporary OpenGL, - X, and other drivers is huge, and reworking them to use a different way to - mmap a buffer rather invasive. - - The assumption in the current dma-buf interfaces is that redirecting the - initial mmap is all that's needed. A survey of some of the existing - subsystems shows that no driver seems to do any nefarious thing like syncing - up with outstanding asynchronous processing on the device or allocating - special resources at fault time. So hopefully this is good enough, since - adding interfaces to intercept pagefaults and allow pte shootdowns would - increase the complexity quite a bit. - - Interface: - int dma_buf_mmap(struct dma_buf *, struct vm_area_struct *, - unsigned long); - - If the importing subsystem simply provides a special-purpose mmap call to set - up a mapping in userspace, calling do_mmap with dma_buf->file will equally - achieve that for a dma-buf object. - -3. Implementation notes for exporters - - Because dma-buf buffers have invariant size over their lifetime, the dma-buf - core checks whether a vma is too large and rejects such mappings. The - exporter hence does not need to duplicate this check. - - Because existing importing subsystems might presume coherent mappings for - userspace, the exporter needs to set up a coherent mapping. If that's not - possible, it needs to fake coherency by manually shooting down ptes when - leaving the cpu domain and flushing caches at fault time. Note that all the - dma_buf files share the same anon inode, hence the exporter needs to replace - the dma_buf file stored in vma->vm_file with it's own if pte shootdown is - required. This is because the kernel uses the underlying inode's address_space - for vma tracking (and hence pte tracking at shootdown time with - unmap_mapping_range). - - If the above shootdown dance turns out to be too expensive in certain - scenarios, we can extend dma-buf with a more explicit cache tracking scheme - for userspace mappings. But the current assumption is that using mmap is - always a slower path, so some inefficiencies should be acceptable. - - Exporters that shoot down mappings (for any reasons) shall not do any - synchronization at fault time with outstanding device operations. - Synchronization is an orthogonal issue to sharing the backing storage of a - buffer and hence should not be handled by dma-buf itself. This is explicitly - mentioned here because many people seem to want something like this, but if - different exporters handle this differently, buffer sharing can fail in - interesting ways depending upong the exporter (if userspace starts depending - upon this implicit synchronization). - -Other Interfaces Exposed to Userspace on the dma-buf FD ------------------------------------------------------- - -- Since kernel 3.12 the dma-buf FD supports the llseek system call, but only - with offset=0 and whence=SEEK_END|SEEK_SET. SEEK_SET is supported to allow - the usual size discover pattern size = SEEK_END(0); SEEK_SET(0). Every other - llseek operation will report -EINVAL. - - If llseek on dma-buf FDs isn't support the kernel will report -ESPIPE for all - cases. Userspace can use this to detect support for discovering the dma-buf - size using llseek. - -Miscellaneous notes -------------------- - -- Any exporters or users of the dma-buf buffer sharing framework must have - a 'select DMA_SHARED_BUFFER' in their respective Kconfigs. - -- In order to avoid fd leaks on exec, the FD_CLOEXEC flag must be set - on the file descriptor. This is not just a resource leak, but a - potential security hole. It could give the newly exec'd application - access to buffers, via the leaked fd, to which it should otherwise - not be permitted access. - - The problem with doing this via a separate fcntl() call, versus doing it - atomically when the fd is created, is that this is inherently racy in a - multi-threaded app[3]. The issue is made worse when it is library code - opening/creating the file descriptor, as the application may not even be - aware of the fd's. - - To avoid this problem, userspace must have a way to request O_CLOEXEC - flag be set when the dma-buf fd is created. So any API provided by - the exporting driver to create a dmabuf fd must provide a way to let - userspace control setting of O_CLOEXEC flag passed in to dma_buf_fd(). - -- If an exporter needs to manually flush caches and hence needs to fake - coherency for mmap support, it needs to be able to zap all the ptes pointing - at the backing storage. Now linux mm needs a struct address_space associated - with the struct file stored in vma->vm_file to do that with the function - unmap_mapping_range. But the dma_buf framework only backs every dma_buf fd - with the anon_file struct file, i.e. all dma_bufs share the same file. - - Hence exporters need to setup their own file (and address_space) association - by setting vma->vm_file and adjusting vma->vm_pgoff in the dma_buf mmap - callback. In the specific case of a gem driver the exporter could use the - shmem file already provided by gem (and set vm_pgoff = 0). Exporters can then - zap ptes by unmapping the corresponding range of the struct address_space - associated with their own file. - -References: -[1] struct dma_buf_ops in include/linux/dma-buf.h -[2] All interfaces mentioned above defined in include/linux/dma-buf.h -[3] https://lwn.net/Articles/236486/ diff --git a/Documentation/driver-api/dma-buf.rst b/Documentation/driver-api/dma-buf.rst index a9b457a4b949..31671b469627 100644 --- a/Documentation/driver-api/dma-buf.rst +++ b/Documentation/driver-api/dma-buf.rst @@ -17,6 +17,98 @@ shared or exclusive fence(s) associated with the buffer. Shared DMA Buffers ------------------ +This document serves as a guide to device-driver writers on what is the dma-buf +buffer sharing API, how to use it for exporting and using shared buffers. + +Any device driver which wishes to be a part of DMA buffer sharing, can do so as +either the 'exporter' of buffers, or the 'user' or 'importer' of buffers. + +Say a driver A wants to use buffers created by driver B, then we call B as the +exporter, and A as buffer-user/importer. + +The exporter + + - implements and manages operations in :c:type:`struct dma_buf_ops + <dma_buf_ops>` for the buffer, + - allows other users to share the buffer by using dma_buf sharing APIs, + - manages the details of buffer allocation, wrapped int a :c:type:`struct + dma_buf <dma_buf>`, + - decides about the actual backing storage where this allocation happens, + - and takes care of any migration of scatterlist - for all (shared) users of + this buffer. + +The buffer-user + + - is one of (many) sharing users of the buffer. + - doesn't need to worry about how the buffer is allocated, or where. + - and needs a mechanism to get access to the scatterlist that makes up this + buffer in memory, mapped into its own address space, so it can access the + same area of memory. This interface is provided by :c:type:`struct + dma_buf_attachment <dma_buf_attachment>`. + +Any exporters or users of the dma-buf buffer sharing framework must have a +'select DMA_SHARED_BUFFER' in their respective Kconfigs. + +Userspace Interface Notes +~~~~~~~~~~~~~~~~~~~~~~~~~ + +Mostly a DMA buffer file descriptor is simply an opaque object for userspace, +and hence the generic interface exposed is very minimal. There's a few things to +consider though: + +- Since kernel 3.12 the dma-buf FD supports the llseek system call, but only + with offset=0 and whence=SEEK_END|SEEK_SET. SEEK_SET is supported to allow + the usual size discover pattern size = SEEK_END(0); SEEK_SET(0). Every other + llseek operation will report -EINVAL. + + If llseek on dma-buf FDs isn't support the kernel will report -ESPIPE for all + cases. Userspace can use this to detect support for discovering the dma-buf + size using llseek. + +- In order to avoid fd leaks on exec, the FD_CLOEXEC flag must be set + on the file descriptor. This is not just a resource leak, but a + potential security hole. It could give the newly exec'd application + access to buffers, via the leaked fd, to which it should otherwise + not be permitted access. + + The problem with doing this via a separate fcntl() call, versus doing it + atomically when the fd is created, is that this is inherently racy in a + multi-threaded app[3]. The issue is made worse when it is library code + opening/creating the file descriptor, as the application may not even be + aware of the fd's. + + To avoid this problem, userspace must have a way to request O_CLOEXEC + flag be set when the dma-buf fd is created. So any API provided by + the exporting driver to create a dmabuf fd must provide a way to let + userspace control setting of O_CLOEXEC flag passed in to dma_buf_fd(). + +- Memory mapping the contents of the DMA buffer is also supported. See the + discussion below on `CPU Access to DMA Buffer Objects`_ for the full details. + +- The DMA buffer FD is also pollable, see `Fence Poll Support`_ below for + details. + +Basic Operation and Device DMA Access +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +.. kernel-doc:: drivers/dma-buf/dma-buf.c + :doc: dma buf device access + +CPU Access to DMA Buffer Objects +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +.. kernel-doc:: drivers/dma-buf/dma-buf.c + :doc: cpu access + +Fence Poll Support +~~~~~~~~~~~~~~~~~~ + +.. kernel-doc:: drivers/dma-buf/dma-buf.c + :doc: fence polling + +Kernel Functions and Structures Reference +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + .. kernel-doc:: drivers/dma-buf/dma-buf.c :export: diff --git a/Documentation/driver-api/infrastructure.rst b/Documentation/driver-api/infrastructure.rst index 0bb0b5fc9512..6d9ff316b608 100644 --- a/Documentation/driver-api/infrastructure.rst +++ b/Documentation/driver-api/infrastructure.rst @@ -55,21 +55,6 @@ Device Drivers DMA Management .. kernel-doc:: drivers/base/dma-mapping.c :export: -Device Drivers Power Management -------------------------------- - -.. kernel-doc:: drivers/base/power/main.c - :export: - -Device Drivers ACPI Support ---------------------------- - -.. kernel-doc:: drivers/acpi/scan.c - :export: - -.. kernel-doc:: drivers/acpi/scan.c - :internal: - Device drivers PnP support -------------------------- diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index 72624a16b792..c94b4675d021 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -212,10 +212,11 @@ asynchronous manner and the value may not be very precise. To see a precise snapshot of a moment, you can see /proc/<pid>/smaps file and scan page table. It's slow but very precise. -Table 1-2: Contents of the status files (as of 4.1) +Table 1-2: Contents of the status files (as of 4.8) .............................................................................. Field Content Name filename of the executable + Umask file mode creation mask State state (R is running, S is sleeping, D is sleeping in an uninterruptible wait, Z is zombie, T is traced or stopped) @@ -226,7 +227,6 @@ Table 1-2: Contents of the status files (as of 4.1) TracerPid PID of process tracing this process (0 if not) Uid Real, effective, saved set, and file system UIDs Gid Real, effective, saved set, and file system GIDs - Umask file mode creation mask FDSize number of file descriptor slots currently allocated Groups supplementary group list NStgid descendant namespace thread group ID hierarchy @@ -236,6 +236,7 @@ Table 1-2: Contents of the status files (as of 4.1) VmPeak peak virtual memory size VmSize total program size VmLck locked memory size + VmPin pinned memory size VmHWM peak resident set size ("high water mark") VmRSS size of memory portions. It contains the three following parts (VmRSS = RssAnon + RssFile + RssShmem) diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst index 0c9abdc0ee31..4d4068855ec4 100644 --- a/Documentation/gpu/drm-kms.rst +++ b/Documentation/gpu/drm-kms.rst @@ -48,11 +48,17 @@ CRTC Abstraction ================ .. kernel-doc:: drivers/gpu/drm/drm_crtc.c - :export: + :doc: overview + +CRTC Functions Reference +-------------------------------- .. kernel-doc:: include/drm/drm_crtc.h :internal: +.. kernel-doc:: drivers/gpu/drm/drm_crtc.c + :export: + Frame Buffer Abstraction ======================== diff --git a/Documentation/gpu/drm-mm.rst b/Documentation/gpu/drm-mm.rst index cb5daffcd6be..f5760b140f13 100644 --- a/Documentation/gpu/drm-mm.rst +++ b/Documentation/gpu/drm-mm.rst @@ -34,25 +34,26 @@ TTM initialization ------------------ **Warning** - This section is outdated. -Drivers wishing to support TTM must fill out a drm_bo_driver -structure. The structure contains several fields with function pointers -for initializing the TTM, allocating and freeing memory, waiting for -command completion and fence synchronization, and memory migration. See -the radeon_ttm.c file for an example of usage. +Drivers wishing to support TTM must pass a filled :c:type:`ttm_bo_driver +<ttm_bo_driver>` structure to ttm_bo_device_init, together with an +initialized global reference to the memory manager. The ttm_bo_driver +structure contains several fields with function pointers for +initializing the TTM, allocating and freeing memory, waiting for command +completion and fence synchronization, and memory migration. -The ttm_global_reference structure is made up of several fields: +The :c:type:`struct drm_global_reference <drm_global_reference>` is made +up of several fields: .. code-block:: c - struct ttm_global_reference { + struct drm_global_reference { enum ttm_global_types global_type; size_t size; void *object; - int (*init) (struct ttm_global_reference *); - void (*release) (struct ttm_global_reference *); + int (*init) (struct drm_global_reference *); + void (*release) (struct drm_global_reference *); }; @@ -76,6 +77,12 @@ ttm_bo_global_release(), respectively. Also, like the previous object, ttm_global_item_ref() is used to create an initial reference count for the TTM, which will call your initialization function. +See the radeon_ttm.c file for an example of usage. + +.. kernel-doc:: drivers/gpu/drm/drm_global.c + :export: + + The Graphics Execution Manager (GEM) ==================================== @@ -284,10 +291,17 @@ To use :c:func:`drm_gem_mmap()`, drivers must fill the struct :c:type:`struct drm_driver <drm_driver>` gem_vm_ops field with a pointer to VM operations. -struct vm_operations_struct \*gem_vm_ops struct -vm_operations_struct { void (\*open)(struct vm_area_struct \* area); -void (\*close)(struct vm_area_struct \* area); int (\*fault)(struct -vm_area_struct \*vma, struct vm_fault \*vmf); }; +The VM operations is a :c:type:`struct vm_operations_struct <vm_operations_struct>` +made up of several fields, the more interesting ones being: + +.. code-block:: c + + struct vm_operations_struct { + void (*open)(struct vm_area_struct * area); + void (*close)(struct vm_area_struct * area); + int (*fault)(struct vm_fault *vmf); + }; + The open and close operations must update the GEM object reference count. Drivers can use the :c:func:`drm_gem_vm_open()` and @@ -303,6 +317,17 @@ created. Drivers that want to map the GEM object upfront instead of handling page faults can implement their own mmap file operation handler. +For platforms without MMU the GEM core provides a helper method +:c:func:`drm_gem_cma_get_unmapped_area`. The mmap() routines will call +this to get a proposed address for the mapping. + +To use :c:func:`drm_gem_cma_get_unmapped_area`, drivers must fill the +struct :c:type:`struct file_operations <file_operations>` get_unmapped_area +field with a pointer on :c:func:`drm_gem_cma_get_unmapped_area`. + +More detailed information about get_unmapped_area can be found in +Documentation/nommu-mmap.txt + Memory Coherency ---------------- @@ -442,7 +467,7 @@ LRU Scan/Eviction Support ------------------------- .. kernel-doc:: drivers/gpu/drm/drm_mm.c - :doc: lru scan roaster + :doc: lru scan roster DRM MM Range Allocator Function References ------------------------------------------ @@ -452,3 +477,9 @@ DRM MM Range Allocator Function References .. kernel-doc:: include/drm/drm_mm.h :internal: + +DRM Cache Handling +================== + +.. kernel-doc:: drivers/gpu/drm/drm_cache.c + :export: diff --git a/Documentation/gpu/drm-uapi.rst b/Documentation/gpu/drm-uapi.rst index de3ac9f90f8f..fcc228ef5bc4 100644 --- a/Documentation/gpu/drm-uapi.rst +++ b/Documentation/gpu/drm-uapi.rst @@ -156,8 +156,12 @@ other hand, a driver requires shared state between clients which is visible to user-space and accessible beyond open-file boundaries, they cannot support render nodes. + +Testing and validation +====================== + Validating changes with IGT -=========================== +--------------------------- There's a collection of tests that aims to cover the whole functionality of DRM drivers and that can be used to check that changes to DRM drivers or the @@ -193,6 +197,12 @@ run-tests.sh is a wrapper around piglit that will execute the tests matching the -t options. A report in HTML format will be available in ./results/html/index.html. Results can be compared with piglit. +Display CRC Support +------------------- + +.. kernel-doc:: drivers/gpu/drm/drm_debugfs_crc.c + :doc: CRC ABI + VBlank event handling ===================== @@ -209,16 +219,3 @@ DRM_IOCTL_MODESET_CTL mode setting, since on many devices the vertical blank counter is reset to 0 at some point during modeset. Modern drivers should not call this any more since with kernel mode setting it is a no-op. - -This second part of the GPU Driver Developer's Guide documents driver -code, implementation details and also all the driver-specific userspace -interfaces. Especially since all hardware-acceleration interfaces to -userspace are driver specific for efficiency and other reasons these -interfaces can be rather substantial. Hence every driver has its own -chapter. - -Testing and validation -====================== - -.. kernel-doc:: drivers/gpu/drm/drm_debugfs_crc.c - :doc: CRC ABI diff --git a/Documentation/gpu/i915.rst b/Documentation/gpu/i915.rst index 117d2ab7a5f7..104296dffad1 100644 --- a/Documentation/gpu/i915.rst +++ b/Documentation/gpu/i915.rst @@ -213,6 +213,18 @@ Video BIOS Table (VBT) .. kernel-doc:: drivers/gpu/drm/i915/intel_vbt_defs.h :internal: +Display PLLs +------------ + +.. kernel-doc:: drivers/gpu/drm/i915/intel_dpll_mgr.c + :doc: Display PLLs + +.. kernel-doc:: drivers/gpu/drm/i915/intel_dpll_mgr.c + :internal: + +.. kernel-doc:: drivers/gpu/drm/i915/intel_dpll_mgr.h + :internal: + Memory Management and Command Submission ======================================== @@ -356,4 +368,95 @@ switch_mm .. kernel-doc:: drivers/gpu/drm/i915/i915_trace.h :doc: switch_mm tracepoint +Perf +==== + +Overview +-------- +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :doc: i915 Perf Overview + +Comparison with Core Perf +------------------------- +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :doc: i915 Perf History and Comparison with Core Perf + +i915 Driver Entry Points +------------------------ + +This section covers the entrypoints exported outside of i915_perf.c to +integrate with drm/i915 and to handle the `DRM_I915_PERF_OPEN` ioctl. + +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: i915_perf_init +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: i915_perf_fini +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: i915_perf_register +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: i915_perf_unregister +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: i915_perf_open_ioctl +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: i915_perf_release + +i915 Perf Stream +---------------- + +This section covers the stream-semantics-agnostic structures and functions +for representing an i915 perf stream FD and associated file operations. + +.. kernel-doc:: drivers/gpu/drm/i915/i915_drv.h + :functions: i915_perf_stream +.. kernel-doc:: drivers/gpu/drm/i915/i915_drv.h + :functions: i915_perf_stream_ops + +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: read_properties_unlocked +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: i915_perf_open_ioctl_locked +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: i915_perf_destroy_locked +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: i915_perf_read +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: i915_perf_ioctl +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: i915_perf_enable_locked +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: i915_perf_disable_locked +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: i915_perf_poll +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: i915_perf_poll_locked + +i915 Perf Observation Architecture Stream +----------------------------------------- + +.. kernel-doc:: drivers/gpu/drm/i915/i915_drv.h + :functions: i915_oa_ops + +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: i915_oa_stream_init +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: i915_oa_read +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: i915_oa_stream_enable +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: i915_oa_stream_disable +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: i915_oa_wait_unlocked +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :functions: i915_oa_poll_wait + +All i915 Perf Internals +----------------------- + +This section simply includes all currently documented i915 perf internals, in +no particular order, but may include some more minor utilities or platform +specific details than found in the more high-level sections. + +.. kernel-doc:: drivers/gpu/drm/i915/i915_perf.c + :internal: + .. WARNING: DOCPROC directive not supported: !Cdrivers/gpu/drm/i915/i915_irq.c diff --git a/Documentation/gpu/index.rst b/Documentation/gpu/index.rst index 367d7c36b8e9..f81278a7c2cc 100644 --- a/Documentation/gpu/index.rst +++ b/Documentation/gpu/index.rst @@ -11,6 +11,7 @@ Linux GPU Driver Developer's Guide drm-kms-helpers drm-uapi i915 + tinydrm vga-switcheroo vgaarbiter diff --git a/Documentation/gpu/introduction.rst b/Documentation/gpu/introduction.rst index 1903595b5310..eb284eb748ba 100644 --- a/Documentation/gpu/introduction.rst +++ b/Documentation/gpu/introduction.rst @@ -23,13 +23,12 @@ For consistency this documentation uses American English. Abbreviations are written as all-uppercase, for example: DRM, KMS, IOCTL, CRTC, and so on. To aid in reading, documentations make full use of the markup characters kerneldoc provides: @parameter for function parameters, -@member for structure members, &structure to reference structures and -function() for functions. These all get automatically hyperlinked if -kerneldoc for the referenced objects exists. When referencing entries in -function vtables please use ->vfunc(). Note that kerneldoc does not -support referencing struct members directly, so please add a reference -to the vtable struct somewhere in the same paragraph or at least -section. +@member for structure members (within the same structure), &struct structure to +reference structures and function() for functions. These all get automatically +hyperlinked if kerneldoc for the referenced objects exists. When referencing +entries in function vtables (and structure members in general) please use +&vtable_name.vfunc. Unfortunately this does not yet yield a direct link to the +member, only the structure. Except in special situations (to separate locked from unlocked variants) locking requirements for functions aren't documented in the kerneldoc. @@ -49,3 +48,5 @@ section name should be all upper-case or not, and whether it should end in a colon or not. Go with the file-local style. Other common section names are "Notes" with information for dangerous or tricky corner cases, and "FIXME" where the interface could be cleaned up. + +Also read the :ref:`guidelines for the kernel documentation at large <doc_guide>`. diff --git a/Documentation/gpu/tinydrm.rst b/Documentation/gpu/tinydrm.rst new file mode 100644 index 000000000000..a913644bfc19 --- /dev/null +++ b/Documentation/gpu/tinydrm.rst @@ -0,0 +1,42 @@ +========================== +drm/tinydrm Driver library +========================== + +.. kernel-doc:: drivers/gpu/drm/tinydrm/core/tinydrm-core.c + :doc: overview + +Core functionality +================== + +.. kernel-doc:: drivers/gpu/drm/tinydrm/core/tinydrm-core.c + :doc: core + +.. kernel-doc:: include/drm/tinydrm/tinydrm.h + :internal: + +.. kernel-doc:: drivers/gpu/drm/tinydrm/core/tinydrm-core.c + :export: + +.. kernel-doc:: drivers/gpu/drm/tinydrm/core/tinydrm-pipe.c + :export: + +Additional helpers +================== + +.. kernel-doc:: include/drm/tinydrm/tinydrm-helpers.h + :internal: + +.. kernel-doc:: drivers/gpu/drm/tinydrm/core/tinydrm-helpers.c + :export: + +MIPI DBI Compatible Controllers +=============================== + +.. kernel-doc:: drivers/gpu/drm/tinydrm/mipi-dbi.c + :doc: overview + +.. kernel-doc:: include/drm/tinydrm/mipi-dbi.h + :internal: + +.. kernel-doc:: drivers/gpu/drm/tinydrm/mipi-dbi.c + :export: diff --git a/Documentation/media/uapi/cec/cec-func-close.rst b/Documentation/media/uapi/cec/cec-func-close.rst index 8267c31b317d..895d9c2d1c04 100644 --- a/Documentation/media/uapi/cec/cec-func-close.rst +++ b/Documentation/media/uapi/cec/cec-func-close.rst @@ -33,11 +33,6 @@ Arguments Description =========== -.. note:: - - This documents the proposed CEC API. This API is not yet finalized - and is currently only available as a staging kernel module. - Closes the cec device. Resources associated with the file descriptor are freed. The device configuration remain unchanged. diff --git a/Documentation/media/uapi/cec/cec-func-ioctl.rst b/Documentation/media/uapi/cec/cec-func-ioctl.rst index 9e8dbb118d6a..7dcfd178fb24 100644 --- a/Documentation/media/uapi/cec/cec-func-ioctl.rst +++ b/Documentation/media/uapi/cec/cec-func-ioctl.rst @@ -39,11 +39,6 @@ Arguments Description =========== -.. note:: - - This documents the proposed CEC API. This API is not yet finalized - and is currently only available as a staging kernel module. - The :c:func:`ioctl()` function manipulates cec device parameters. The argument ``fd`` must be an open file descriptor. diff --git a/Documentation/media/uapi/cec/cec-func-open.rst b/Documentation/media/uapi/cec/cec-func-open.rst index af3f5b5c24c6..0304388cd159 100644 --- a/Documentation/media/uapi/cec/cec-func-open.rst +++ b/Documentation/media/uapi/cec/cec-func-open.rst @@ -46,11 +46,6 @@ Arguments Description =========== -.. note:: - - This documents the proposed CEC API. This API is not yet finalized - and is currently only available as a staging kernel module. - To open a cec device applications call :c:func:`open()` with the desired device name. The function has no side effects; the device configuration remain unchanged. diff --git a/Documentation/media/uapi/cec/cec-func-poll.rst b/Documentation/media/uapi/cec/cec-func-poll.rst index cfb73e6027a5..6a863cfda6e0 100644 --- a/Documentation/media/uapi/cec/cec-func-poll.rst +++ b/Documentation/media/uapi/cec/cec-func-poll.rst @@ -39,11 +39,6 @@ Arguments Description =========== -.. note:: - - This documents the proposed CEC API. This API is not yet finalized - and is currently only available as a staging kernel module. - With the :c:func:`poll()` function applications can wait for CEC events. diff --git a/Documentation/media/uapi/cec/cec-intro.rst b/Documentation/media/uapi/cec/cec-intro.rst index 4a19ea5323a9..07ee2b8f89d6 100644 --- a/Documentation/media/uapi/cec/cec-intro.rst +++ b/Documentation/media/uapi/cec/cec-intro.rst @@ -3,11 +3,6 @@ Introduction ============ -.. note:: - - This documents the proposed CEC API. This API is not yet finalized - and is currently only available as a staging kernel module. - HDMI connectors provide a single pin for use by the Consumer Electronics Control protocol. This protocol allows different devices connected by an HDMI cable to communicate. The protocol for CEC version 1.4 is defined @@ -31,3 +26,15 @@ control just the CEC pin. Drivers that support CEC will create a CEC device node (/dev/cecX) to give userspace access to the CEC adapter. The :ref:`CEC_ADAP_G_CAPS` ioctl will tell userspace what it is allowed to do. + +In order to check the support and test it, it is suggested to download +the `v4l-utils <https://git.linuxtv.org/v4l-utils.git/>`_ package. It +provides three tools to handle CEC: + +- cec-ctl: the Swiss army knife of CEC. Allows you to configure, transmit + and monitor CEC messages. + +- cec-compliance: does a CEC compliance test of a remote CEC device to + determine how compliant the CEC implementation is. + +- cec-follower: emulates a CEC follower. diff --git a/Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst b/Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst index 2b0ddb14b280..a0e961f11017 100644 --- a/Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst +++ b/Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst @@ -29,11 +29,6 @@ Arguments Description =========== -.. note:: - - This documents the proposed CEC API. This API is not yet finalized - and is currently only available as a staging kernel module. - All cec devices must support :ref:`ioctl CEC_ADAP_G_CAPS <CEC_ADAP_G_CAPS>`. To query device information, applications call the ioctl with a pointer to a struct :c:type:`cec_caps`. The driver fills the structure and diff --git a/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst b/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst index b878637e91b3..09f09bbe28d4 100644 --- a/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst +++ b/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst @@ -35,11 +35,6 @@ Arguments Description =========== -.. note:: - - This documents the proposed CEC API. This API is not yet finalized - and is currently only available as a staging kernel module. - To query the current CEC logical addresses, applications call :ref:`ioctl CEC_ADAP_G_LOG_ADDRS <CEC_ADAP_G_LOG_ADDRS>` with a pointer to a struct :c:type:`cec_log_addrs` where the driver stores the logical addresses. diff --git a/Documentation/media/uapi/cec/cec-ioc-adap-g-phys-addr.rst b/Documentation/media/uapi/cec/cec-ioc-adap-g-phys-addr.rst index 3357deb43c85..a3cdc75cec3e 100644 --- a/Documentation/media/uapi/cec/cec-ioc-adap-g-phys-addr.rst +++ b/Documentation/media/uapi/cec/cec-ioc-adap-g-phys-addr.rst @@ -35,11 +35,6 @@ Arguments Description =========== -.. note:: - - This documents the proposed CEC API. This API is not yet finalized - and is currently only available as a staging kernel module. - To query the current physical address applications call :ref:`ioctl CEC_ADAP_G_PHYS_ADDR <CEC_ADAP_G_PHYS_ADDR>` with a pointer to a __u16 where the driver stores the physical address. diff --git a/Documentation/media/uapi/cec/cec-ioc-dqevent.rst b/Documentation/media/uapi/cec/cec-ioc-dqevent.rst index e256c6605de7..6e589a1fae17 100644 --- a/Documentation/media/uapi/cec/cec-ioc-dqevent.rst +++ b/Documentation/media/uapi/cec/cec-ioc-dqevent.rst @@ -30,11 +30,6 @@ Arguments Description =========== -.. note:: - - This documents the proposed CEC API. This API is not yet finalized - and is currently only available as a staging kernel module. - CEC devices can send asynchronous events. These can be retrieved by calling :c:func:`CEC_DQEVENT`. If the file descriptor is in non-blocking mode and no event is pending, then it will return -1 and diff --git a/Documentation/media/uapi/cec/cec-ioc-g-mode.rst b/Documentation/media/uapi/cec/cec-ioc-g-mode.rst index 4f5818b9d277..e4ded9df0a84 100644 --- a/Documentation/media/uapi/cec/cec-ioc-g-mode.rst +++ b/Documentation/media/uapi/cec/cec-ioc-g-mode.rst @@ -31,11 +31,6 @@ Arguments Description =========== -.. note:: - - This documents the proposed CEC API. This API is not yet finalized - and is currently only available as a staging kernel module. - By default any filehandle can use :ref:`CEC_TRANSMIT`, but in order to prevent applications from stepping on each others toes it must be possible to obtain exclusive access to the CEC adapter. This ioctl sets the diff --git a/Documentation/media/uapi/cec/cec-ioc-receive.rst b/Documentation/media/uapi/cec/cec-ioc-receive.rst index bdf015b1d1dc..dc2adb391c0a 100644 --- a/Documentation/media/uapi/cec/cec-ioc-receive.rst +++ b/Documentation/media/uapi/cec/cec-ioc-receive.rst @@ -34,11 +34,6 @@ Arguments Description =========== -.. note:: - - This documents the proposed CEC API. This API is not yet finalized - and is currently only available as a staging kernel module. - To receive a CEC message the application has to fill in the ``timeout`` field of struct :c:type:`cec_msg` and pass it to :ref:`ioctl CEC_RECEIVE <CEC_RECEIVE>`. diff --git a/Documentation/networking/mpls-sysctl.txt b/Documentation/networking/mpls-sysctl.txt index 9ed15f86c17c..15d8d16934fd 100644 --- a/Documentation/networking/mpls-sysctl.txt +++ b/Documentation/networking/mpls-sysctl.txt @@ -5,8 +5,8 @@ platform_labels - INTEGER possible to configure forwarding for label values equal to or greater than the number of platform labels. - A dense utliziation of the entries in the platform label table - is possible and expected aas the platform labels are locally + A dense utilization of the entries in the platform label table + is possible and expected as the platform labels are locally allocated. If the number of platform label table entries is set to 0 no diff --git a/Documentation/power/states.txt b/Documentation/power/states.txt index 8a39ce45d8a0..008ecb588317 100644 --- a/Documentation/power/states.txt +++ b/Documentation/power/states.txt @@ -35,9 +35,7 @@ only one way to cause the system to go into the Suspend-To-RAM state (write The default suspend mode (ie. the one to be used without writing anything into /sys/power/mem_sleep) is either "deep" (if Suspend-To-RAM is supported) or "s2idle", but it can be overridden by the value of the "mem_sleep_default" -parameter in the kernel command line. On some ACPI-based systems, depending on -the information in the FADT, the default may be "s2idle" even if Suspend-To-RAM -is supported. +parameter in the kernel command line. The properties of all of the sleep states are described below. diff --git a/Documentation/sound/hd-audio/dp-mst.rst b/Documentation/sound/hd-audio/dp-mst.rst index 58b72437e6c3..1617459e332f 100644 --- a/Documentation/sound/hd-audio/dp-mst.rst +++ b/Documentation/sound/hd-audio/dp-mst.rst @@ -19,6 +19,23 @@ PCM === To be added +Pin Initialization +================== +Each pin may have several device entries (virtual pins). On Intel platform, +the device entries number is dynamically changed. If DP MST hub is connected, +it is in DP MST mode, and the device entries number is 3. Otherwise, the +device entries number is 1. + +To simplify the implementation, all the device entries will be initialized +when bootup no matter whether it is in DP MST mode or not. + +Connection list +=============== +DP MST reuses connection list code. The code can be reused because +device entries on the same pin have the same connection list. + +This means DP MST gets the device entry connection list without the +device entry setting. Jack ==== diff --git a/Documentation/vfio-mediated-device.txt b/Documentation/vfio-mediated-device.txt index b38afec35edc..d226c7a5ba8b 100644 --- a/Documentation/vfio-mediated-device.txt +++ b/Documentation/vfio-mediated-device.txt @@ -127,22 +127,22 @@ the VFIO when devices are unbound from the driver. Physical Device Driver Interface -------------------------------- -The physical device driver interface provides the parent_ops[3] structure to -define the APIs to manage work in the mediated core driver that is related to -the physical device. +The physical device driver interface provides the mdev_parent_ops[3] structure +to define the APIs to manage work in the mediated core driver that is related +to the physical device. -The structures in the parent_ops structure are as follows: +The structures in the mdev_parent_ops structure are as follows: * dev_attr_groups: attributes of the parent device * mdev_attr_groups: attributes of the mediated device * supported_config: attributes to define supported configurations -The functions in the parent_ops structure are as follows: +The functions in the mdev_parent_ops structure are as follows: * create: allocate basic resources in a driver for a mediated device * remove: free resources in a driver when a mediated device is destroyed -The callbacks in the parent_ops structure are as follows: +The callbacks in the mdev_parent_ops structure are as follows: * open: open callback of mediated device * close: close callback of mediated device @@ -151,14 +151,14 @@ The callbacks in the parent_ops structure are as follows: * write: write emulation callback * mmap: mmap emulation callback -A driver should use the parent_ops structure in the function call to register -itself with the mdev core driver: +A driver should use the mdev_parent_ops structure in the function call to +register itself with the mdev core driver: extern int mdev_register_device(struct device *dev, - const struct parent_ops *ops); + const struct mdev_parent_ops *ops); -However, the parent_ops structure is not required in the function call that a -driver should use to unregister itself with the mdev core driver: +However, the mdev_parent_ops structure is not required in the function call +that a driver should use to unregister itself with the mdev core driver: extern void mdev_unregister_device(struct device *dev); @@ -223,6 +223,9 @@ Directories and files under the sysfs for Each Physical Device sprintf(buf, "%s-%s", dev_driver_string(parent->dev), group->name); + (or using mdev_parent_dev(mdev) to arrive at the parent device outside + of the core mdev code) + * device_api This attribute should show which device API is being created, for example, @@ -394,5 +397,5 @@ References [1] See Documentation/vfio.txt for more information on VFIO. [2] struct mdev_driver in include/linux/mdev.h -[3] struct parent_ops in include/linux/mdev.h +[3] struct mdev_parent_ops in include/linux/mdev.h [4] struct vfio_iommu_driver_ops in include/linux/vfio.h diff --git a/Documentation/vm/page_frags b/Documentation/vm/page_frags new file mode 100644 index 000000000000..a6714565dbf9 --- /dev/null +++ b/Documentation/vm/page_frags @@ -0,0 +1,42 @@ +Page fragments +-------------- + +A page fragment is an arbitrary-length arbitrary-offset area of memory +which resides within a 0 or higher order compound page. Multiple +fragments within that page are individually refcounted, in the page's +reference counter. + +The page_frag functions, page_frag_alloc and page_frag_free, provide a +simple allocation framework for page fragments. This is used by the +network stack and network device drivers to provide a backing region of +memory for use as either an sk_buff->head, or to be used in the "frags" +portion of skb_shared_info. + +In order to make use of the page fragment APIs a backing page fragment +cache is needed. This provides a central point for the fragment allocation +and tracks allows multiple calls to make use of a cached page. The +advantage to doing this is that multiple calls to get_page can be avoided +which can be expensive at allocation time. However due to the nature of +this caching it is required that any calls to the cache be protected by +either a per-cpu limitation, or a per-cpu limitation and forcing interrupts +to be disabled when executing the fragment allocation. + +The network stack uses two separate caches per CPU to handle fragment +allocation. The netdev_alloc_cache is used by callers making use of the +__netdev_alloc_frag and __netdev_alloc_skb calls. The napi_alloc_cache is +used by callers of the __napi_alloc_frag and __napi_alloc_skb calls. The +main difference between these two calls is the context in which they may be +called. The "netdev" prefixed functions are usable in any context as these +functions will disable interrupts, while the "napi" prefixed functions are +only usable within the softirq context. + +Many network device drivers use a similar methodology for allocating page +fragments, but the page fragments are cached at the ring or descriptor +level. In order to enable these cases it is necessary to provide a generic +way of tearing down a page cache. For this reason __page_frag_cache_drain +was implemented. It allows for freeing multiple references from a single +page via a single call. The advantage to doing this is that it allows for +cleaning up the multiple references that were added to a page in order to +avoid calling get_page per allocation. + +Alexander Duyck, Nov 29, 2016. |