diff options
Diffstat (limited to 'Documentation')
14 files changed, 0 insertions, 602 deletions
diff --git a/Documentation/devicetree/bindings/arm/sirf.yaml b/Documentation/devicetree/bindings/arm/sirf.yaml deleted file mode 100644 index b25eb35d1b66..000000000000 --- a/Documentation/devicetree/bindings/arm/sirf.yaml +++ /dev/null @@ -1,30 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/arm/sirf.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: CSR SiRFprimaII and SiRFmarco device tree bindings. - -maintainers: - - Binghua Duan <binghua.duan@csr.com> - - Barry Song <Baohua.Song@csr.com> - -properties: - $nodename: - const: '/' - compatible: - oneOf: - - items: - - const: sirf,atlas6-cb - - const: sirf,atlas6 - - items: - - const: sirf,atlas7-cb - - const: sirf,atlas7 - - items: - - const: sirf,prima2-cb - - const: sirf,prima2 - -additionalProperties: true - -... diff --git a/Documentation/devicetree/bindings/arm/ste-u300.txt b/Documentation/devicetree/bindings/arm/ste-u300.txt deleted file mode 100644 index d11d80006a19..000000000000 --- a/Documentation/devicetree/bindings/arm/ste-u300.txt +++ /dev/null @@ -1,46 +0,0 @@ -ST-Ericsson U300 Device Tree Bindings - -For various board the "board" node may contain specific properties -that pertain to this particular board, such as board-specific GPIOs -or board power regulator supplies. - -Required root node property: - -compatible="stericsson,u300"; - -Required node: syscon -This contains the system controller. -- compatible: must be "stericsson,u300-syscon". -- reg: the base address and size of the system controller. - -Boards with the U300 SoC include: - -S365 "Small Board U365": - -Required node: s365 -This contains the board-specific information. -- compatible: must be "stericsson,s365". -- vana15-supply: the regulator supplying the 1.5V to drive the - board. -- syscon: a pointer to the syscon node so we can access the - syscon registers to set the board as self-powered. - -Example: - -/ { - model = "ST-Ericsson U300"; - compatible = "stericsson,u300"; - #address-cells = <1>; - #size-cells = <1>; - - s365 { - compatible = "stericsson,s365"; - vana15-supply = <&ab3100_ldo_d_reg>; - syscon = <&syscon>; - }; - - syscon: syscon@c0011000 { - compatible = "stericsson,u300-syscon"; - reg = <0xc0011000 0x1000>; - }; -}; diff --git a/Documentation/devicetree/bindings/arm/zte,sysctrl.txt b/Documentation/devicetree/bindings/arm/zte,sysctrl.txt deleted file mode 100644 index 7e66b7f7ba96..000000000000 --- a/Documentation/devicetree/bindings/arm/zte,sysctrl.txt +++ /dev/null @@ -1,30 +0,0 @@ -ZTE sysctrl Registers - -Registers for 'zte,zx296702' SoC: - -System management required properties: - - compatible = "zte,sysctrl" - -Low power management required properties: - - compatible = "zte,zx296702-pcu" - -Bus matrix required properties: - - compatible = "zte,zx-bus-matrix" - - -Registers for 'zte,zx296718' SoC: - -System management required properties: - - compatible = "zte,zx296718-aon-sysctrl" - - compatible = "zte,zx296718-sysctrl" - -Example: -aon_sysctrl: aon-sysctrl@116000 { - compatible = "zte,zx296718-aon-sysctrl", "syscon"; - reg = <0x116000 0x1000>; -}; - -sysctrl: sysctrl@1463000 { - compatible = "zte,zx296718-sysctrl", "syscon"; - reg = <0x1463000 0x1000>; -}; diff --git a/Documentation/devicetree/bindings/arm/zte.yaml b/Documentation/devicetree/bindings/arm/zte.yaml deleted file mode 100644 index 672f8129cd31..000000000000 --- a/Documentation/devicetree/bindings/arm/zte.yaml +++ /dev/null @@ -1,28 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/arm/zte.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: ZTE platforms device tree bindings - -maintainers: - - Jun Nie <jun.nie@linaro.org> - -properties: - $nodename: - const: '/' - compatible: - oneOf: - - items: - - enum: - - zte,zx296702-ad1 - - const: zte,zx296702 - - items: - - enum: - - zte,zx296718-evb - - const: zte,zx296718 - -additionalProperties: true - -... diff --git a/Documentation/devicetree/bindings/c6x/clocks.txt b/Documentation/devicetree/bindings/c6x/clocks.txt deleted file mode 100644 index a04f5fd30122..000000000000 --- a/Documentation/devicetree/bindings/c6x/clocks.txt +++ /dev/null @@ -1,40 +0,0 @@ -C6X PLL Clock Controllers -------------------------- - -This is a first-cut support for the SoC clock controllers. This is still -under development and will probably change as the common device tree -clock support is added to the kernel. - -Required properties: - -- compatible: "ti,c64x+pll" - May also have SoC-specific value to support SoC-specific initialization - in the driver. One of: - "ti,c6455-pll" - "ti,c6457-pll" - "ti,c6472-pll" - "ti,c6474-pll" - -- reg: base address and size of register area -- clock-frequency: input clock frequency in hz - - -Optional properties: - -- ti,c64x+pll-bypass-delay: CPU cycles to delay when entering bypass mode - -- ti,c64x+pll-reset-delay: CPU cycles to delay after PLL reset - -- ti,c64x+pll-lock-delay: CPU cycles to delay after PLL frequency change - -Example: - - clock-controller@29a0000 { - compatible = "ti,c6472-pll", "ti,c64x+pll"; - reg = <0x029a0000 0x200>; - clock-frequency = <25000000>; - - ti,c64x+pll-bypass-delay = <200>; - ti,c64x+pll-reset-delay = <12000>; - ti,c64x+pll-lock-delay = <80000>; - }; diff --git a/Documentation/devicetree/bindings/c6x/dscr.txt b/Documentation/devicetree/bindings/c6x/dscr.txt deleted file mode 100644 index 92672235de57..000000000000 --- a/Documentation/devicetree/bindings/c6x/dscr.txt +++ /dev/null @@ -1,127 +0,0 @@ -Device State Configuration Registers ------------------------------------- - -TI C6X SoCs contain a region of miscellaneous registers which provide various -function for SoC control or status. Details vary considerably among from SoC -to SoC with no two being alike. - -In general, the Device State Configuration Registers (DSCR) will provide one or -more configuration registers often protected by a lock register where one or -more key values must be written to a lock register in order to unlock the -configuration register for writes. These configuration register may be used to -enable (and disable in some cases) SoC pin drivers, select peripheral clock -sources (internal or pin), etc. In some cases, a configuration register is -write once or the individual bits are write once. In addition to device config, -the DSCR block may provide registers which are used to reset peripherals, -provide device ID information, provide ethernet MAC addresses, as well as other -miscellaneous functions. - -For device state control (enable/disable), each device control is assigned an -id which is used by individual device drivers to control the state as needed. - -Required properties: - -- compatible: must be "ti,c64x+dscr" -- reg: register area base and size - -Optional properties: - - NOTE: These are optional in that not all SoCs will have all properties. For - SoCs which do support a given property, leaving the property out of the - device tree will result in reduced functionality or possibly driver - failure. - -- ti,dscr-devstat - offset of the devstat register - -- ti,dscr-silicon-rev - offset, start bit, and bitsize of silicon revision field - -- ti,dscr-rmii-resets - offset and bitmask of RMII reset field. May have multiple tuples if more - than one ethernet port is available. - -- ti,dscr-locked-regs - possibly multiple tuples describing registers which are write protected by - a lock register. Each tuple consists of the register offset, lock register - offsset, and the key value used to unlock the register. - -- ti,dscr-kick-regs - offset and key values of two "kick" registers used to write protect other - registers in DSCR. On SoCs using kick registers, the first key must be - written to the first kick register and the second key must be written to - the second register before other registers in the area are write-enabled. - -- ti,dscr-mac-fuse-regs - MAC addresses are contained in two registers. Each element of a MAC address - is contained in a single byte. This property has two tuples. Each tuple has - a register offset and four cells representing bytes in the register from - most significant to least. The value of these four cells is the MAC byte - index (1-6) of the byte within the register. A value of 0 means the byte - is unused in the MAC address. - -- ti,dscr-devstate-ctl-regs - This property describes the bitfields used to control the state of devices. - Each tuple describes a range of identical bitfields used to control one or - more devices (one bitfield per device). The layout of each tuple is: - - start_id num_ids reg enable disable start_bit nbits - - Where: - start_id is device id for the first device control in the range - num_ids is the number of device controls in the range - reg is the offset of the register holding the control bits - enable is the value to enable a device - disable is the value to disable a device (0xffffffff if cannot disable) - start_bit is the bit number of the first bit in the range - nbits is the number of bits per device control - -- ti,dscr-devstate-stat-regs - This property describes the bitfields used to provide device state status - for device states controlled by the DSCR. Each tuple describes a range of - identical bitfields used to provide status for one or more devices (one - bitfield per device). The layout of each tuple is: - - start_id num_ids reg enable disable start_bit nbits - - Where: - start_id is device id for the first device status in the range - num_ids is the number of devices covered by the range - reg is the offset of the register holding the status bits - enable is the value indicating device is enabled - disable is the value indicating device is disabled - start_bit is the bit number of the first bit in the range - nbits is the number of bits per device status - -- ti,dscr-privperm - Offset and default value for register used to set access privilege for - some SoC devices. - - -Example: - - device-state-config-regs@2a80000 { - compatible = "ti,c64x+dscr"; - reg = <0x02a80000 0x41000>; - - ti,dscr-devstat = <0>; - ti,dscr-silicon-rev = <8 28 0xf>; - ti,dscr-rmii-resets = <0x40020 0x00040000>; - - ti,dscr-locked-regs = <0x40008 0x40004 0x0f0a0b00>; - ti,dscr-devstate-ctl-regs = - <0 12 0x40008 1 0 0 2 - 12 1 0x40008 3 0 30 2 - 13 2 0x4002c 1 0xffffffff 0 1>; - ti,dscr-devstate-stat-regs = - <0 10 0x40014 1 0 0 3 - 10 2 0x40018 1 0 0 3>; - - ti,dscr-mac-fuse-regs = <0x700 1 2 3 4 - 0x704 5 6 0 0>; - - ti,dscr-privperm = <0x41c 0xaaaaaaaa>; - - ti,dscr-kick-regs = <0x38 0x83E70B13 - 0x3c 0x95A4F1E0>; - }; diff --git a/Documentation/devicetree/bindings/c6x/emifa.txt b/Documentation/devicetree/bindings/c6x/emifa.txt deleted file mode 100644 index 0ff6e9b9a13f..000000000000 --- a/Documentation/devicetree/bindings/c6x/emifa.txt +++ /dev/null @@ -1,62 +0,0 @@ -External Memory Interface -------------------------- - -The emifa node describes a simple external bus controller found on some C6X -SoCs. This interface provides external busses with a number of chip selects. - -Required properties: - -- compatible: must be "ti,c64x+emifa", "simple-bus" -- reg: register area base and size -- #address-cells: must be 2 (chip-select + offset) -- #size-cells: must be 1 -- ranges: mapping from EMIFA space to parent space - - -Optional properties: - -- ti,dscr-dev-enable: Device ID if EMIF is enabled/disabled from DSCR - -- ti,emifa-burst-priority: - Number of memory transfers after which the EMIF will elevate the priority - of the oldest command in the command FIFO. Setting this field to 255 - disables this feature, thereby allowing old commands to stay in the FIFO - indefinitely. - -- ti,emifa-ce-config: - Configuration values for each of the supported chip selects. - -Example: - - emifa@70000000 { - compatible = "ti,c64x+emifa", "simple-bus"; - #address-cells = <2>; - #size-cells = <1>; - reg = <0x70000000 0x100>; - ranges = <0x2 0x0 0xa0000000 0x00000008 - 0x3 0x0 0xb0000000 0x00400000 - 0x4 0x0 0xc0000000 0x10000000 - 0x5 0x0 0xD0000000 0x10000000>; - - ti,dscr-dev-enable = <13>; - ti,emifa-burst-priority = <255>; - ti,emifa-ce-config = <0x00240120 - 0x00240120 - 0x00240122 - 0x00240122>; - - flash@3,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "cfi-flash"; - reg = <0x3 0x0 0x400000>; - bank-width = <1>; - device-width = <1>; - partition@0 { - reg = <0x0 0x400000>; - label = "NOR"; - }; - }; - }; - -This shows a flash chip attached to chip select 3. diff --git a/Documentation/devicetree/bindings/c6x/soc.txt b/Documentation/devicetree/bindings/c6x/soc.txt deleted file mode 100644 index b1e4973b5769..000000000000 --- a/Documentation/devicetree/bindings/c6x/soc.txt +++ /dev/null @@ -1,28 +0,0 @@ -C6X System-on-Chip ------------------- - -Required properties: - -- compatible: "simple-bus" -- #address-cells: must be 1 -- #size-cells: must be 1 -- ranges - -Optional properties: - -- model: specific SoC model - -- nodes for IP blocks within SoC - - -Example: - - soc { - compatible = "simple-bus"; - model = "tms320c6455"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - ... - }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,c64x+megamod-pic.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,c64x+megamod-pic.txt deleted file mode 100644 index ee3f9c351501..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/ti,c64x+megamod-pic.txt +++ /dev/null @@ -1,103 +0,0 @@ -C6X Interrupt Chips -------------------- - -* C64X+ Core Interrupt Controller - - The core interrupt controller provides 16 prioritized interrupts to the - C64X+ core. Priority 0 and 1 are used for reset and NMI respectively. - Priority 2 and 3 are reserved. Priority 4-15 are used for interrupt - sources coming from outside the core. - - Required properties: - -------------------- - - compatible: Should be "ti,c64x+core-pic"; - - #interrupt-cells: <1> - - Interrupt Specifier Definition - ------------------------------ - Single cell specifying the core interrupt priority level (4-15) where - 4 is highest priority and 15 is lowest priority. - - Example - ------- - core_pic: interrupt-controller@0 { - interrupt-controller; - #interrupt-cells = <1>; - compatible = "ti,c64x+core-pic"; - }; - - - -* C64x+ Megamodule Interrupt Controller - - The megamodule PIC consists of four interrupt mupliplexers each of which - combine up to 32 interrupt inputs into a single interrupt output which - may be cascaded into the core interrupt controller. The megamodule PIC - has a total of 12 outputs cascading into the core interrupt controller. - One for each core interrupt priority level. In addition to the combined - interrupt sources, individual megamodule interrupts may be cascaded to - the core interrupt controller. When an individual interrupt is cascaded, - it is no longer handled through a megamodule interrupt combiner and is - considered to have the core interrupt controller as the parent. - - Required properties: - -------------------- - - compatible: "ti,c64x+megamod-pic" - - interrupt-controller - - #interrupt-cells: <1> - - reg: base address and size of register area - - interrupts: This should have four cells; one for each interrupt combiner. - The cells contain the core priority interrupt to which the - corresponding combiner output is wired. - - Optional properties: - -------------------- - - ti,c64x+megamod-pic-mux: Array of 12 cells correspnding to the 12 core - priority interrupts. The first cell corresponds to - core priority 4 and the last cell corresponds to - core priority 15. The value of each cell is the - megamodule interrupt source which is MUXed to - the core interrupt corresponding to the cell - position. Allowed values are 4 - 127. Mapping for - interrupts 0 - 3 (combined interrupt sources) are - ignored. - - Interrupt Specifier Definition - ------------------------------ - Single cell specifying the megamodule interrupt source (4-127). Note that - interrupts mapped directly to the core with "ti,c64x+megamod-pic-mux" will - use the core interrupt controller as their parent and the specifier will - be the core priority level, not the megamodule interrupt number. - - Examples - -------- - megamod_pic: interrupt-controller@1800000 { - compatible = "ti,c64x+megamod-pic"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0x1800000 0x1000>; - interrupt-parent = <&core_pic>; - interrupts = < 12 13 14 15 >; - }; - - This is a minimal example where all individual interrupts go through a - combiner. Combiner-0 is mapped to core interrupt 12, combiner-1 is mapped - to interrupt 13, etc. - - - megamod_pic: interrupt-controller@1800000 { - compatible = "ti,c64x+megamod-pic"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0x1800000 0x1000>; - interrupt-parent = <&core_pic>; - interrupts = < 12 13 14 15 >; - ti,c64x+megamod-pic-mux = < 0 0 0 0 - 32 0 0 0 - 0 0 0 0 >; - }; - - This the same as the first example except that megamodule interrupt 32 is - mapped directly to core priority interrupt 8. The node using this interrupt - must set the core controller as its interrupt parent and use 8 in the - interrupt specifier value. diff --git a/Documentation/devicetree/bindings/reset/sirf,rstc.txt b/Documentation/devicetree/bindings/reset/sirf,rstc.txt deleted file mode 100644 index 0505de742d30..000000000000 --- a/Documentation/devicetree/bindings/reset/sirf,rstc.txt +++ /dev/null @@ -1,42 +0,0 @@ -CSR SiRFSoC Reset Controller -====================================== - -Please also refer to reset.txt in this directory for common reset -controller binding usage. - -Required properties: -- compatible: Should be "sirf,prima2-rstc" or "sirf,marco-rstc" -- reg: should be register base and length as documented in the - datasheet -- #reset-cells: 1, see below - -example: - -rstc: reset-controller@88010000 { - compatible = "sirf,prima2-rstc"; - reg = <0x88010000 0x1000>; - #reset-cells = <1>; -}; - -Specifying reset lines connected to IP modules -============================================== - -The reset controller(rstc) manages various reset sources. This module provides -reset signals for most blocks in system. Those device nodes should specify the -reset line on the rstc in their resets property, containing a phandle to the -rstc device node and a RESET_INDEX specifying which module to reset, as described -in reset.txt. - -For SiRFSoC, RESET_INDEX is just reset_bit defined in SW_RST0 and SW_RST1 registers. -For modules whose rest_bit is in SW_RST0, its RESET_INDEX is 0~31. For modules whose -rest_bit is in SW_RST1, its RESET_INDEX is 32~63. - -example: - -vpp@90020000 { - compatible = "sirf,prima2-vpp"; - reg = <0x90020000 0x10000>; - interrupts = <31>; - clocks = <&clks 35>; - resets = <&rstc 6>; -}; diff --git a/Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt b/Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt deleted file mode 100644 index b015508f9780..000000000000 --- a/Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt +++ /dev/null @@ -1,20 +0,0 @@ -ZTE zx2967 SoCs Reset Controller -======================================= - -Please also refer to reset.txt in this directory for common reset -controller binding usage. - -Required properties: -- compatible: should be one of the following. - * zte,zx296718-reset -- reg: physical base address of the controller and length of memory mapped - region. -- #reset-cells: must be 1. - -example: - - reset: reset-controller@1461060 { - compatible = "zte,zx296718-reset"; - reg = <0x01461060 0x8>; - #reset-cells = <1>; - }; diff --git a/Documentation/devicetree/bindings/serial/pl011.yaml b/Documentation/devicetree/bindings/serial/pl011.yaml index 07fa6d26f2b4..1f8e9f2644b6 100644 --- a/Documentation/devicetree/bindings/serial/pl011.yaml +++ b/Documentation/devicetree/bindings/serial/pl011.yaml @@ -19,7 +19,6 @@ select: contains: enum: - arm,pl011 - - zte,zx296702-uart required: - compatible @@ -30,7 +29,6 @@ properties: - const: arm,pl011 - const: arm,primecell - items: - - const: zte,zx296702-uart - const: arm,primecell reg: diff --git a/Documentation/devicetree/bindings/soc/zte/pd-2967xx.txt b/Documentation/devicetree/bindings/soc/zte/pd-2967xx.txt deleted file mode 100644 index 7629de1c2c72..000000000000 --- a/Documentation/devicetree/bindings/soc/zte/pd-2967xx.txt +++ /dev/null @@ -1,19 +0,0 @@ -* ZTE zx2967 family Power Domains - -zx2967 family includes support for multiple power domains which are used -to gate power to one or more peripherals on the processor. - -Required Properties: - - compatible: should be one of the following. - * zte,zx296718-pcu - for zx296718 power domain. - - reg: physical base address of the controller and length of memory mapped - region. - - #power-domain-cells: Must be 1. - -Example: - - pcu_domain: pcu@117000 { - compatible = "zte,zx296718-pcu"; - reg = <0x00117000 0x1000>; - #power-domain-cells = <1>; - }; diff --git a/Documentation/devicetree/bindings/timer/ti,c64x+timer64.txt b/Documentation/devicetree/bindings/timer/ti,c64x+timer64.txt deleted file mode 100644 index d96c1e283e73..000000000000 --- a/Documentation/devicetree/bindings/timer/ti,c64x+timer64.txt +++ /dev/null @@ -1,25 +0,0 @@ -Timer64 -------- - -The timer64 node describes C6X event timers. - -Required properties: - -- compatible: must be "ti,c64x+timer64" -- reg: base address and size of register region -- interrupts: interrupt id - -Optional properties: - -- ti,dscr-dev-enable: Device ID used to enable timer IP through DSCR interface. - -- ti,core-mask: on multi-core SoCs, bitmask of cores allowed to use this timer. - -Example: - timer0: timer@25e0000 { - compatible = "ti,c64x+timer64"; - ti,core-mask = < 0x01 >; - reg = <0x25e0000 0x40>; - interrupt-parent = <&megamod_pic>; - interrupts = < 16 >; - }; |