summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/admin-guide/README.rst2
-rw-r--r--Documentation/arm64/cpu-feature-registers.rst2
-rw-r--r--Documentation/arm64/silicon-errata.rst8
-rw-r--r--Documentation/block/bfq-iosched.rst9
-rw-r--r--Documentation/core-api/dma-api.rst8
-rw-r--r--Documentation/dev-tools/kunit/faq.rst40
-rw-r--r--Documentation/devicetree/bindings/Makefile38
-rw-r--r--Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt2
-rw-r--r--Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml4
-rw-r--r--Documentation/devicetree/bindings/clock/imx27-clock.yaml2
-rw-r--r--Documentation/devicetree/bindings/clock/imx31-clock.yaml2
-rw-r--r--Documentation/devicetree/bindings/clock/imx5-clock.yaml2
-rw-r--r--Documentation/devicetree/bindings/display/bridge/sii902x.txt2
-rw-r--r--Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt4
-rw-r--r--Documentation/devicetree/bindings/display/imx/ldb.txt4
-rw-r--r--Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml2
-rw-r--r--Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml2
-rw-r--r--Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt2
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt2
-rw-r--r--Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt2
-rw-r--r--Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.txt2
-rw-r--r--Documentation/devicetree/bindings/net/mediatek-bluetooth.txt2
-rw-r--r--Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt2
-rw-r--r--Documentation/devicetree/bindings/sound/audio-graph-card.txt2
-rw-r--r--Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt2
-rw-r--r--Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt2
-rw-r--r--Documentation/devicetree/bindings/thermal/thermal-sensor.yaml2
-rw-r--r--Documentation/devicetree/bindings/thermal/thermal-zones.yaml2
-rw-r--r--Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml2
-rw-r--r--Documentation/devicetree/bindings/timer/csky,mptimer.txt2
-rw-r--r--Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml4
-rw-r--r--Documentation/devicetree/writing-schema.rst9
-rw-r--r--Documentation/i2c/slave-eeprom-backend.rst22
-rw-r--r--Documentation/kbuild/modules.rst7
-rw-r--r--Documentation/kbuild/reproducible-builds.rst2
-rw-r--r--Documentation/mips/ingenic-tcu.rst2
-rw-r--r--Documentation/networking/arcnet.rst2
-rw-r--r--Documentation/networking/ax25.rst2
-rw-r--r--Documentation/networking/can_ucan_protocol.rst4
-rw-r--r--Documentation/networking/dsa/dsa.rst2
-rw-r--r--Documentation/networking/ip-sysctl.rst2
-rw-r--r--Documentation/networking/ipvs-sysctl.rst2
-rw-r--r--Documentation/networking/rxrpc.rst2
-rw-r--r--Documentation/process/changes.rst2
-rw-r--r--Documentation/virt/kvm/api.rst5
45 files changed, 157 insertions, 71 deletions
diff --git a/Documentation/admin-guide/README.rst b/Documentation/admin-guide/README.rst
index 5fb526900023..5aad534233cd 100644
--- a/Documentation/admin-guide/README.rst
+++ b/Documentation/admin-guide/README.rst
@@ -258,7 +258,7 @@ Configuring the kernel
Compiling the kernel
--------------------
- - Make sure you have at least gcc 4.6 available.
+ - Make sure you have at least gcc 4.9 available.
For more information, refer to :ref:`Documentation/process/changes.rst <changes>`.
Please note that you can still run a.out user programs with this kernel.
diff --git a/Documentation/arm64/cpu-feature-registers.rst b/Documentation/arm64/cpu-feature-registers.rst
index 314fa5bc2655..f28853f80089 100644
--- a/Documentation/arm64/cpu-feature-registers.rst
+++ b/Documentation/arm64/cpu-feature-registers.rst
@@ -171,6 +171,7 @@ infrastructure:
3) ID_AA64PFR1_EL1 - Processor Feature Register 1
+
+------------------------------+---------+---------+
| Name | bits | visible |
+------------------------------+---------+---------+
@@ -181,6 +182,7 @@ infrastructure:
4) MIDR_EL1 - Main ID Register
+
+------------------------------+---------+---------+
| Name | bits | visible |
+------------------------------+---------+---------+
diff --git a/Documentation/arm64/silicon-errata.rst b/Documentation/arm64/silicon-errata.rst
index 936cf2a59ca4..3f7c3a7e8a2b 100644
--- a/Documentation/arm64/silicon-errata.rst
+++ b/Documentation/arm64/silicon-errata.rst
@@ -147,6 +147,14 @@ stable kernels.
+----------------+-----------------+-----------------+-----------------------------+
| Qualcomm Tech. | Falkor v{1,2} | E1041 | QCOM_FALKOR_ERRATUM_1041 |
+----------------+-----------------+-----------------+-----------------------------+
+| Qualcomm Tech. | Kryo4xx Gold | N/A | ARM64_ERRATUM_1463225 |
++----------------+-----------------+-----------------+-----------------------------+
+| Qualcomm Tech. | Kryo4xx Gold | N/A | ARM64_ERRATUM_1418040 |
++----------------+-----------------+-----------------+-----------------------------+
+| Qualcomm Tech. | Kryo4xx Silver | N/A | ARM64_ERRATUM_1530923 |
++----------------+-----------------+-----------------+-----------------------------+
+| Qualcomm Tech. | Kryo4xx Silver | N/A | ARM64_ERRATUM_1024718 |
++----------------+-----------------+-----------------+-----------------------------+
+----------------+-----------------+-----------------+-----------------------------+
| Fujitsu | A64FX | E#010001 | FUJITSU_ERRATUM_010001 |
+----------------+-----------------+-----------------+-----------------------------+
diff --git a/Documentation/block/bfq-iosched.rst b/Documentation/block/bfq-iosched.rst
index 0d237d402860..19d4d1570cee 100644
--- a/Documentation/block/bfq-iosched.rst
+++ b/Documentation/block/bfq-iosched.rst
@@ -492,13 +492,6 @@ set max_budget to higher values than those to which BFQ would have set
it with auto-tuning. An alternative way to achieve this goal is to
just increase the value of timeout_sync, leaving max_budget equal to 0.
-weights
--------
-
-Read-only parameter, used to show the weights of the currently active
-BFQ queues.
-
-
4. Group scheduling with BFQ
============================
@@ -566,7 +559,7 @@ Parameters to set
For each group, there is only the following parameter to set.
weight (namely blkio.bfq.weight or io.bfq-weight): the weight of the
-group inside its parent. Available values: 1..10000 (default 100). The
+group inside its parent. Available values: 1..1000 (default 100). The
linear mapping between ioprio and weights, described at the beginning
of the tunable section, is still valid, but all weights higher than
IOPRIO_BE_NR*10 are mapped to ioprio 0.
diff --git a/Documentation/core-api/dma-api.rst b/Documentation/core-api/dma-api.rst
index 2d8d2fed7317..f41620439ef3 100644
--- a/Documentation/core-api/dma-api.rst
+++ b/Documentation/core-api/dma-api.rst
@@ -206,6 +206,14 @@ others should not be larger than the returned value.
::
+ bool
+ dma_need_sync(struct device *dev, dma_addr_t dma_addr);
+
+Returns %true if dma_sync_single_for_{device,cpu} calls are required to
+transfer memory ownership. Returns %false if those calls can be skipped.
+
+::
+
unsigned long
dma_get_merge_boundary(struct device *dev);
diff --git a/Documentation/dev-tools/kunit/faq.rst b/Documentation/dev-tools/kunit/faq.rst
index ea55b2467653..1628862e7024 100644
--- a/Documentation/dev-tools/kunit/faq.rst
+++ b/Documentation/dev-tools/kunit/faq.rst
@@ -61,3 +61,43 @@ test, or an end-to-end test.
kernel by installing a production configuration of the kernel on production
hardware with a production userspace and then trying to exercise some behavior
that depends on interactions between the hardware, the kernel, and userspace.
+
+KUnit isn't working, what should I do?
+======================================
+
+Unfortunately, there are a number of things which can break, but here are some
+things to try.
+
+1. Try running ``./tools/testing/kunit/kunit.py run`` with the ``--raw_output``
+ parameter. This might show details or error messages hidden by the kunit_tool
+ parser.
+2. Instead of running ``kunit.py run``, try running ``kunit.py config``,
+ ``kunit.py build``, and ``kunit.py exec`` independently. This can help track
+ down where an issue is occurring. (If you think the parser is at fault, you
+ can run it manually against stdin or a file with ``kunit.py parse``.)
+3. Running the UML kernel directly can often reveal issues or error messages
+ kunit_tool ignores. This should be as simple as running ``./vmlinux`` after
+ building the UML kernel (e.g., by using ``kunit.py build``). Note that UML
+ has some unusual requirements (such as the host having a tmpfs filesystem
+ mounted), and has had issues in the past when built statically and the host
+ has KASLR enabled. (On older host kernels, you may need to run ``setarch
+ `uname -m` -R ./vmlinux`` to disable KASLR.)
+4. Make sure the kernel .config has ``CONFIG_KUNIT=y`` and at least one test
+ (e.g. ``CONFIG_KUNIT_EXAMPLE_TEST=y``). kunit_tool will keep its .config
+ around, so you can see what config was used after running ``kunit.py run``.
+ It also preserves any config changes you might make, so you can
+ enable/disable things with ``make ARCH=um menuconfig`` or similar, and then
+ re-run kunit_tool.
+5. Try to run ``make ARCH=um defconfig`` before running ``kunit.py run``. This
+ may help clean up any residual config items which could be causing problems.
+6. Finally, try running KUnit outside UML. KUnit and KUnit tests can run be
+ built into any kernel, or can be built as a module and loaded at runtime.
+ Doing so should allow you to determine if UML is causing the issue you're
+ seeing. When tests are built-in, they will execute when the kernel boots, and
+ modules will automatically execute associated tests when loaded. Test results
+ can be collected from ``/sys/kernel/debug/kunit/<test suite>/results``, and
+ can be parsed with ``kunit.py parse``. For more details, see "KUnit on
+ non-UML architectures" in :doc:`usage`.
+
+If none of the above tricks help, you are always welcome to email any issues to
+kunit-dev@googlegroups.com.
diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile
index a63898954068..91c4d00e96d3 100644
--- a/Documentation/devicetree/bindings/Makefile
+++ b/Documentation/devicetree/bindings/Makefile
@@ -2,7 +2,6 @@
DT_DOC_CHECKER ?= dt-doc-validate
DT_EXTRACT_EX ?= dt-extract-example
DT_MK_SCHEMA ?= dt-mk-schema
-DT_MK_SCHEMA_USERONLY_FLAG := $(if $(DT_SCHEMA_FILES), -u)
DT_SCHEMA_MIN_VERSION = 2020.5
@@ -35,21 +34,40 @@ quiet_cmd_mk_schema = SCHEMA $@
DT_DOCS = $(shell $(find_cmd) | sed -e 's|^$(srctree)/||')
-DT_SCHEMA_FILES ?= $(DT_DOCS)
-
-extra-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dts, $(DT_SCHEMA_FILES))
-extra-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dt.yaml, $(DT_SCHEMA_FILES))
-extra-$(CHECK_DT_BINDING) += processed-schema-examples.yaml
-
override DTC_FLAGS := \
-Wno-avoid_unnecessary_addr_size \
- -Wno-graph_child_address
+ -Wno-graph_child_address \
+ -Wno-interrupt_provider
$(obj)/processed-schema-examples.yaml: $(DT_DOCS) check_dtschema_version FORCE
$(call if_changed,mk_schema)
-$(obj)/processed-schema.yaml: DT_MK_SCHEMA_FLAGS := $(DT_MK_SCHEMA_USERONLY_FLAG)
+ifeq ($(DT_SCHEMA_FILES),)
+
+# Unless DT_SCHEMA_FILES is specified, use the full schema for dtbs_check too.
+# Just copy processed-schema-examples.yaml
+
+$(obj)/processed-schema.yaml: $(obj)/processed-schema-examples.yaml FORCE
+ $(call if_changed,copy)
+
+DT_SCHEMA_FILES = $(DT_DOCS)
+
+else
+
+# If DT_SCHEMA_FILES is specified, use it for processed-schema.yaml
+
+$(obj)/processed-schema.yaml: DT_MK_SCHEMA_FLAGS := -u
$(obj)/processed-schema.yaml: $(DT_SCHEMA_FILES) check_dtschema_version FORCE
$(call if_changed,mk_schema)
-extra-y += processed-schema.yaml
+endif
+
+extra-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dts, $(DT_SCHEMA_FILES))
+extra-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dt.yaml, $(DT_SCHEMA_FILES))
+extra-$(CHECK_DT_BINDING) += processed-schema-examples.yaml
+extra-$(CHECK_DTBS) += processed-schema.yaml
+
+# Hack: avoid 'Argument list too long' error for 'make clean'. Remove most of
+# build artifacts here before they are processed by scripts/Makefile.clean
+clean-files = $(shell find $(obj) \( -name '*.example.dts' -o \
+ -name '*.example.dt.yaml' \) -delete 2>/dev/null)
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
index 715047444391..10b8459e49f8 100644
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
@@ -47,7 +47,7 @@ Required properties:
&lsio_mu1 1 2
&lsio_mu1 1 3
&lsio_mu1 3 3>;
- See Documentation/devicetree/bindings/mailbox/fsl,mu.txt
+ See Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
for detailed mailbox binding.
Note: Each mu which supports general interrupt should have an alias correctly
diff --git a/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml b/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml
index c4c9119e4a20..a0c6c5d2b70f 100644
--- a/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml
+++ b/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml
@@ -80,14 +80,14 @@ examples:
ranges = <1 0x00000000 0x42000000 0x02000000>,
<5 0x00000000 0x46000000 0x01000000>;
- ethernet@1,01f00000 {
+ ethernet@1,1f00000 {
compatible = "smsc,lan9115";
reg = <1 0x01f00000 0x1000>;
interrupts = <0 48 4>;
phy-mode = "mii";
};
- uart@5,00200000 {
+ serial@5,200000 {
compatible = "ns16550a";
reg = <5 0x00200000 0x20>;
interrupts = <0 49 4>;
diff --git a/Documentation/devicetree/bindings/clock/imx27-clock.yaml b/Documentation/devicetree/bindings/clock/imx27-clock.yaml
index b5f3ed084ea0..a75365453dbc 100644
--- a/Documentation/devicetree/bindings/clock/imx27-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx27-clock.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Clock bindings for Freescale i.MX27
maintainers:
- - Fabio Estevam <fabio.estevam@freescale.com>
+ - Fabio Estevam <fabio.estevam@nxp.com>
description: |
The clock consumer should specify the desired clock by having the clock
diff --git a/Documentation/devicetree/bindings/clock/imx31-clock.yaml b/Documentation/devicetree/bindings/clock/imx31-clock.yaml
index 1b6f75d3928a..a25a374b3b2a 100644
--- a/Documentation/devicetree/bindings/clock/imx31-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx31-clock.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Clock bindings for Freescale i.MX31
maintainers:
- - Fabio Estevam <fabio.estevam@freescale.com>
+ - Fabio Estevam <fabio.estevam@nxp.com>
description: |
The clock consumer should specify the desired clock by having the clock
diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.yaml b/Documentation/devicetree/bindings/clock/imx5-clock.yaml
index f5c2b3d7a910..4d9e7c73dce9 100644
--- a/Documentation/devicetree/bindings/clock/imx5-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx5-clock.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Clock bindings for Freescale i.MX5
maintainers:
- - Fabio Estevam <fabio.estevam@freescale.com>
+ - Fabio Estevam <fabio.estevam@nxp.com>
description: |
The clock consumer should specify the desired clock by having the clock
diff --git a/Documentation/devicetree/bindings/display/bridge/sii902x.txt b/Documentation/devicetree/bindings/display/bridge/sii902x.txt
index 6e14e087c0d0..0d1db3f9da84 100644
--- a/Documentation/devicetree/bindings/display/bridge/sii902x.txt
+++ b/Documentation/devicetree/bindings/display/bridge/sii902x.txt
@@ -37,7 +37,7 @@ Optional properties:
simple-card or audio-graph-card binding. See their binding
documents on how to describe the way the sii902x device is
connected to the rest of the audio system:
- Documentation/devicetree/bindings/sound/simple-card.txt
+ Documentation/devicetree/bindings/sound/simple-card.yaml
Documentation/devicetree/bindings/sound/audio-graph-card.txt
Note: In case of the audio-graph-card binding the used port
index should be 3.
diff --git a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt
index 5bf77f6dd19d..5a99490c17b9 100644
--- a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt
+++ b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt
@@ -68,7 +68,7 @@ Required properties:
datasheet
- clocks : phandle to the PRE axi clock input, as described
in Documentation/devicetree/bindings/clock/clock-bindings.txt and
- Documentation/devicetree/bindings/clock/imx6q-clock.txt.
+ Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
- clock-names: should be "axi"
- interrupts: should contain the PRE interrupt
- fsl,iram: phandle pointing to the mmio-sram device node, that should be
@@ -94,7 +94,7 @@ Required properties:
datasheet
- clocks : phandles to the PRG ipg and axi clock inputs, as described
in Documentation/devicetree/bindings/clock/clock-bindings.txt and
- Documentation/devicetree/bindings/clock/imx6q-clock.txt.
+ Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
- clock-names: should be "ipg" and "axi"
- fsl,pres: phandles to the PRE units attached to this PRG, with the fixed
PRE as the first entry and the muxable PREs following.
diff --git a/Documentation/devicetree/bindings/display/imx/ldb.txt b/Documentation/devicetree/bindings/display/imx/ldb.txt
index 38c637fa39dd..8e6e7d797943 100644
--- a/Documentation/devicetree/bindings/display/imx/ldb.txt
+++ b/Documentation/devicetree/bindings/display/imx/ldb.txt
@@ -30,8 +30,8 @@ Required properties:
"di2_sel" - IPU2 DI0 mux
"di3_sel" - IPU2 DI1 mux
The needed clock numbers for each are documented in
- Documentation/devicetree/bindings/clock/imx5-clock.txt, and in
- Documentation/devicetree/bindings/clock/imx6q-clock.txt.
+ Documentation/devicetree/bindings/clock/imx5-clock.yaml, and in
+ Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
Optional properties:
- pinctrl-names : should be "default" on i.MX53, not used on i.MX6q
diff --git a/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml b/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml
index 41fd5713c156..be69e0cc50fc 100644
--- a/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml
+++ b/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml
@@ -33,7 +33,7 @@ additionalProperties: false
examples:
- |
- sysreg {
+ sysreg@0 {
compatible = "arm,versatile-sysreg", "syscon", "simple-mfd";
reg = <0x00000 0x1000>;
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml
index ec8ae742d4da..7204da5eb4c5 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml
@@ -24,7 +24,7 @@ properties:
description: |
Should contain a list of phandles pointing to display interface port
of vop devices. vop definitions as defined in
- Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
+ Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
required:
- compatible
diff --git a/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt b/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt
index ba455589f869..e1c49b660d3a 100644
--- a/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt
@@ -12,7 +12,7 @@ Required properties for the top level node:
Only the GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
- #interrupt-cells : Specifies the number of cells needed to encode an
interrupt. Should be 2. The first cell defines the interrupt number,
- the second encodes the triger flags encoded as described in
+ the second encodes the trigger flags encoded as described in
Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
- compatible:
- "mediatek,mt7621-gpio" for Mediatek controllers
diff --git a/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
index e13405355166..e6bbcae4d07f 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
@@ -10,7 +10,7 @@ Interrupt number definition:
16-31 : private irq, and we use 16 as the co-processor timer.
31-1024: common irq for soc ip.
-Interrupt triger mode: (Defined in dt-bindings/interrupt-controller/irq.h)
+Interrupt trigger mode: (Defined in dt-bindings/interrupt-controller/irq.h)
IRQ_TYPE_LEVEL_HIGH (default)
IRQ_TYPE_LEVEL_LOW
IRQ_TYPE_EDGE_RISING
diff --git a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt
index 4438432bfe9b..ad76edccf881 100644
--- a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt
+++ b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt
@@ -87,7 +87,7 @@ Example:
ranges;
/* APU<->RPU0 IPI mailbox controller */
- ipi_mailbox_rpu0: mailbox@ff90400 {
+ ipi_mailbox_rpu0: mailbox@ff990400 {
reg = <0xff990400 0x20>,
<0xff990420 0x20>,
<0xff990080 0x20>,
diff --git a/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.txt b/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.txt
index 8c4d649cdd8f..2d7cdf19a0d0 100644
--- a/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.txt
+++ b/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.txt
@@ -8,7 +8,7 @@ The embedded controller requires the SPI controller driver to signal readiness
to receive a transfer (that is, when TX FIFO contains the response data) by
strobing the ACK pin with the ready signal. See the "ready-gpios" property of the
SSP binding as documented in:
-<Documentation/devicetree/bindings/spi/spi-pxa2xx.txt>.
+<Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml>.
Example:
&ssp3 {
diff --git a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt
index 219bcbd0d344..9ef5bacda8c1 100644
--- a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt
+++ b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt
@@ -3,7 +3,7 @@ MediaTek SoC built-in Bluetooth Devices
This device is a serial attached device to BTIF device and thus it must be a
child node of the serial node with BTIF. The dt-bindings details for BTIF
-device can be known via Documentation/devicetree/bindings/serial/8250.txt.
+device can be known via Documentation/devicetree/bindings/serial/8250.yaml.
Required properties:
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
index b68613188c19..1b8e8b4a6379 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
@@ -114,7 +114,7 @@ with values derived from the SoC user manual.
[flags]>
On other mach-shmobile platforms GPIO is handled by the gpio-rcar driver.
-Please refer to Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt
+Please refer to Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
for documentation of the GPIO device tree bindings on those platforms.
diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-card.txt
index 269682619a70..d5f6919a2d69 100644
--- a/Documentation/devicetree/bindings/sound/audio-graph-card.txt
+++ b/Documentation/devicetree/bindings/sound/audio-graph-card.txt
@@ -5,7 +5,7 @@ It is based on common bindings for device graphs.
see ${LINUX}/Documentation/devicetree/bindings/graph.txt
Basically, Audio Graph Card property is same as Simple Card.
-see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.txt
+see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.yaml
Below are same as Simple-Card.
diff --git a/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt
index 4d51f3f5ea98..a6ffcdec6f6a 100644
--- a/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt
+++ b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt
@@ -5,7 +5,7 @@ codec or external codecs.
sti sound drivers allows to expose sti SoC audio interface through the
generic ASoC simple card. For details about sound card declaration please refer to
-Documentation/devicetree/bindings/sound/simple-card.txt.
+Documentation/devicetree/bindings/sound/simple-card.yaml.
1) sti-uniperiph-dai: audio dai device.
---------------------------------------
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt
index 790311a42bf1..c8c1e913f4e7 100644
--- a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt
@@ -19,7 +19,7 @@ Required properties:
SPI Controller nodes must be child of GENI based Qualcomm Universal
Peripharal. Please refer GENI based QUP wrapper controller node bindings
-described in Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt.
+described in Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml.
SPI slave nodes must be children of the SPI master node and conform to SPI bus
binding as described in Documentation/devicetree/bindings/spi/spi-bus.txt.
diff --git a/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml b/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml
index fcd25a0af38c..727d04550324 100644
--- a/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml
+++ b/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml
@@ -41,7 +41,7 @@ examples:
#include <dt-bindings/interrupt-controller/arm-gic.h>
// Example 1: SDM845 TSENS
- soc: soc@0 {
+ soc: soc {
#address-cells = <2>;
#size-cells = <2>;
diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
index b8515d3eeaa2..3ec9cc87ec50 100644
--- a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
+++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
@@ -224,7 +224,7 @@ examples:
#include <dt-bindings/thermal/thermal.h>
// Example 1: SDM845 TSENS
- soc: soc@0 {
+ soc {
#address-cells = <2>;
#size-cells = <2>;
diff --git a/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml b/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
index 25b9209c2e5d..ea14de80ec75 100644
--- a/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
@@ -35,7 +35,7 @@ examples:
#include <dt-bindings/soc/ti,sci_pm_domain.h>
vtm: thermal@42050000 {
compatible = "ti,am654-vtm";
- reg = <0x0 0x42050000 0x0 0x25c>;
+ reg = <0x42050000 0x25c>;
power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>;
#thermal-sensor-cells = <1>;
};
diff --git a/Documentation/devicetree/bindings/timer/csky,mptimer.txt b/Documentation/devicetree/bindings/timer/csky,mptimer.txt
index 15cfec08fbb8..f5c7e99cf52b 100644
--- a/Documentation/devicetree/bindings/timer/csky,mptimer.txt
+++ b/Documentation/devicetree/bindings/timer/csky,mptimer.txt
@@ -8,7 +8,7 @@ regs is accessed by cpu co-processor 4 registers with mtcr/mfcr.
- PTIM_CTLR "cr<0, 14>" Control reg to start reset timer.
- PTIM_TSR "cr<1, 14>" Interrupt cleanup status reg.
- PTIM_CCVR "cr<3, 14>" Current counter value reg.
- - PTIM_LVR "cr<6, 14>" Window value reg to triger next event.
+ - PTIM_LVR "cr<6, 14>" Window value reg to trigger next event.
==============================
timer node bindings definition
diff --git a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml
index e4e83d3971ac..8b019ac05bbe 100644
--- a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml
+++ b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml
@@ -127,8 +127,8 @@ examples:
#address-cells = <1>;
#size-cells = <0>;
- string@0409 {
- reg = <0x0409>;
+ string@409 {
+ reg = <0x409>;
manufacturer = "ASPEED";
product = "USB Virtual Hub";
serial-number = "0000";
diff --git a/Documentation/devicetree/writing-schema.rst b/Documentation/devicetree/writing-schema.rst
index 220cf464ed77..8c74a99f95e2 100644
--- a/Documentation/devicetree/writing-schema.rst
+++ b/Documentation/devicetree/writing-schema.rst
@@ -1,4 +1,4 @@
-:orphan:
+.. SPDX-License-Identifier: GPL-2.0
Writing DeviceTree Bindings in json-schema
==========================================
@@ -124,9 +124,12 @@ dtc must also be built with YAML output support enabled. This requires that
libyaml and its headers be installed on the host system. For some distributions
that involves installing the development package, such as:
-Debian:
+Debian::
+
apt-get install libyaml-dev
-Fedora:
+
+Fedora::
+
dnf -y install libyaml-devel
Running checks
diff --git a/Documentation/i2c/slave-eeprom-backend.rst b/Documentation/i2c/slave-eeprom-backend.rst
index 0b8cd83698e0..38d951f10302 100644
--- a/Documentation/i2c/slave-eeprom-backend.rst
+++ b/Documentation/i2c/slave-eeprom-backend.rst
@@ -1,14 +1,26 @@
==============================
-Linux I2C slave eeprom backend
+Linux I2C slave EEPROM backend
==============================
-by Wolfram Sang <wsa@sang-engineering.com> in 2014-15
+by Wolfram Sang <wsa@sang-engineering.com> in 2014-20
-This is a proof-of-concept backend which acts like an EEPROM on the connected
-I2C bus. The memory contents can be modified from userspace via this file
-located in sysfs::
+This backend simulates an EEPROM on the connected I2C bus. Its memory contents
+can be accessed from userspace via this file located in sysfs::
/sys/bus/i2c/devices/<device-directory>/slave-eeprom
+The following types are available: 24c02, 24c32, 24c64, and 24c512. Read-only
+variants are also supported. The name needed for instantiating has the form
+'slave-<type>[ro]'. Examples follow:
+
+24c02, read/write, address 0x64:
+ # echo slave-24c02 0x1064 > /sys/bus/i2c/devices/i2c-1/new_device
+
+24c512, read-only, address 0x42:
+ # echo slave-24c512ro 0x1042 > /sys/bus/i2c/devices/i2c-1/new_device
+
+You can also preload data during boot if a device-property named
+'firmware-name' contains a valid filename (DT or ACPI only).
+
As of 2015, Linux doesn't support poll on binary sysfs files, so there is no
notification when another master changed the content.
diff --git a/Documentation/kbuild/modules.rst b/Documentation/kbuild/modules.rst
index a45cccff467d..85ccc878895e 100644
--- a/Documentation/kbuild/modules.rst
+++ b/Documentation/kbuild/modules.rst
@@ -182,7 +182,8 @@ module 8123.ko, which is built from the following files::
8123_pci.c
8123_bin.o_shipped <= Binary blob
---- 3.1 Shared Makefile
+3.1 Shared Makefile
+-------------------
An external module always includes a wrapper makefile that
supports building the module using "make" with no arguments.
@@ -470,9 +471,9 @@ build.
The syntax of the Module.symvers file is::
- <CRC> <Symbol> <Module> <Export Type> <Namespace>
+ <CRC> <Symbol> <Module> <Export Type> <Namespace>
- 0xe1cc2a05 usb_stor_suspend drivers/usb/storage/usb-storage EXPORT_SYMBOL_GPL USB_STORAGE
+ 0xe1cc2a05 usb_stor_suspend drivers/usb/storage/usb-storage EXPORT_SYMBOL_GPL USB_STORAGE
The fields are separated by tabs and values may be empty (e.g.
if no namespace is defined for an exported symbol).
diff --git a/Documentation/kbuild/reproducible-builds.rst b/Documentation/kbuild/reproducible-builds.rst
index 503393854e2e..3b25655e441b 100644
--- a/Documentation/kbuild/reproducible-builds.rst
+++ b/Documentation/kbuild/reproducible-builds.rst
@@ -101,7 +101,7 @@ Structure randomisation
If you enable ``CONFIG_GCC_PLUGIN_RANDSTRUCT``, you will need to
pre-generate the random seed in
-``scripts/gcc-plgins/randomize_layout_seed.h`` so the same value
+``scripts/gcc-plugins/randomize_layout_seed.h`` so the same value
is used in rebuilds.
Debug info conflicts
diff --git a/Documentation/mips/ingenic-tcu.rst b/Documentation/mips/ingenic-tcu.rst
index c5a646b14450..2b75760619b4 100644
--- a/Documentation/mips/ingenic-tcu.rst
+++ b/Documentation/mips/ingenic-tcu.rst
@@ -68,4 +68,4 @@ and frameworks can be controlled from the same registers, all of these
drivers access their registers through the same regmap.
For more information regarding the devicetree bindings of the TCU drivers,
-have a look at Documentation/devicetree/bindings/timer/ingenic,tcu.txt.
+have a look at Documentation/devicetree/bindings/timer/ingenic,tcu.yaml.
diff --git a/Documentation/networking/arcnet.rst b/Documentation/networking/arcnet.rst
index e93d9820f0f1..82fce606c0f0 100644
--- a/Documentation/networking/arcnet.rst
+++ b/Documentation/networking/arcnet.rst
@@ -434,7 +434,7 @@ can set up your network then:
ifconfig arc0 insight
route add insight arc0
route add freedom arc0 /* I would use the subnet here (like I said
- to to in "single protocol" above),
+ to in "single protocol" above),
but the rest of the subnet
unfortunately lies across the PPP
link on freedom, which confuses
diff --git a/Documentation/networking/ax25.rst b/Documentation/networking/ax25.rst
index 824afd7002db..f060cfb1445a 100644
--- a/Documentation/networking/ax25.rst
+++ b/Documentation/networking/ax25.rst
@@ -6,7 +6,7 @@ AX.25
To use the amateur radio protocols within Linux you will need to get a
suitable copy of the AX.25 Utilities. More detailed information about
-AX.25, NET/ROM and ROSE, associated programs and and utilities can be
+AX.25, NET/ROM and ROSE, associated programs and utilities can be
found on http://www.linux-ax25.org.
There is an active mailing list for discussing Linux amateur radio matters
diff --git a/Documentation/networking/can_ucan_protocol.rst b/Documentation/networking/can_ucan_protocol.rst
index 4cef88d24fc7..638ac1ee7914 100644
--- a/Documentation/networking/can_ucan_protocol.rst
+++ b/Documentation/networking/can_ucan_protocol.rst
@@ -144,7 +144,7 @@ UCAN_COMMAND_SET_BITTIMING
*Host2Dev; mandatory*
-Setup bittiming by sending the the structure
+Setup bittiming by sending the structure
``ucan_ctl_payload_t.cmd_set_bittiming`` (see ``struct bittiming`` for
details)
@@ -232,7 +232,7 @@ UCAN_IN_TX_COMPLETE
zero
The CAN device has sent a message to the CAN bus. It answers with a
-list of of tuples <echo-ids, flags>.
+list of tuples <echo-ids, flags>.
The echo-id identifies the frame from (echos the id from a previous
UCAN_OUT_TX message). The flag indicates the result of the
diff --git a/Documentation/networking/dsa/dsa.rst b/Documentation/networking/dsa/dsa.rst
index 563d56c6a25c..a8d15dd2b42b 100644
--- a/Documentation/networking/dsa/dsa.rst
+++ b/Documentation/networking/dsa/dsa.rst
@@ -95,7 +95,7 @@ Ethernet switch.
Networking stack hooks
----------------------
-When a master netdev is used with DSA, a small hook is placed in in the
+When a master netdev is used with DSA, a small hook is placed in the
networking stack is in order to have the DSA subsystem process the Ethernet
switch specific tagging protocol. DSA accomplishes this by registering a
specific (and fake) Ethernet type (later becoming ``skb->protocol``) with the
diff --git a/Documentation/networking/ip-sysctl.rst b/Documentation/networking/ip-sysctl.rst
index b72f89d5694c..837d51f9e1fa 100644
--- a/Documentation/networking/ip-sysctl.rst
+++ b/Documentation/networking/ip-sysctl.rst
@@ -741,7 +741,7 @@ tcp_fastopen - INTEGER
Default: 0x1
- Note that that additional client or server features are only
+ Note that additional client or server features are only
effective if the basic support (0x1 and 0x2) are enabled respectively.
tcp_fastopen_blackhole_timeout_sec - INTEGER
diff --git a/Documentation/networking/ipvs-sysctl.rst b/Documentation/networking/ipvs-sysctl.rst
index be36c4600e8f..2afccc63856e 100644
--- a/Documentation/networking/ipvs-sysctl.rst
+++ b/Documentation/networking/ipvs-sysctl.rst
@@ -114,7 +114,7 @@ drop_entry - INTEGER
modes (when there is no enough available memory, the strategy
is enabled and the variable is automatically set to 2,
otherwise the strategy is disabled and the variable is set to
- 1), and 3 means that that the strategy is always enabled.
+ 1), and 3 means that the strategy is always enabled.
drop_packet - INTEGER
- 0 - disabled (default)
diff --git a/Documentation/networking/rxrpc.rst b/Documentation/networking/rxrpc.rst
index 68552b92dc44..39c2249c7aa7 100644
--- a/Documentation/networking/rxrpc.rst
+++ b/Documentation/networking/rxrpc.rst
@@ -186,7 +186,7 @@ About the AF_RXRPC driver:
time [tunable] after the last connection using it discarded, in case a new
connection is made that could use it.
- (#) A client-side connection is only shared between calls if they have have
+ (#) A client-side connection is only shared between calls if they have
the same key struct describing their security (and assuming the calls
would otherwise share the connection). Non-secured calls would also be
able to share connections with each other.
diff --git a/Documentation/process/changes.rst b/Documentation/process/changes.rst
index 5cfb54c2aaa6..8f68e728ae6b 100644
--- a/Documentation/process/changes.rst
+++ b/Documentation/process/changes.rst
@@ -29,7 +29,7 @@ you probably needn't concern yourself with pcmciautils.
====================== =============== ========================================
Program Minimal version Command to check the version
====================== =============== ========================================
-GNU C 4.8 gcc --version
+GNU C 4.9 gcc --version
GNU make 3.81 make --version
binutils 2.23 ld -v
flex 2.5.35 flex --version
diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst
index 426f94582b7a..320788f81a05 100644
--- a/Documentation/virt/kvm/api.rst
+++ b/Documentation/virt/kvm/api.rst
@@ -4339,14 +4339,15 @@ Errors:
#define KVM_STATE_VMX_PREEMPTION_TIMER_DEADLINE 0x00000001
struct kvm_vmx_nested_state_hdr {
- __u32 flags;
__u64 vmxon_pa;
__u64 vmcs12_pa;
- __u64 preemption_timer_deadline;
struct {
__u16 flags;
} smm;
+
+ __u32 flags;
+ __u64 preemption_timer_deadline;
};
struct kvm_vmx_nested_state_data {