summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt36
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt36
2 files changed, 72 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
new file mode 100644
index 000000000000..9d9e930f3251
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
@@ -0,0 +1,36 @@
+* Toradex Colibri VF50 Touchscreen driver
+
+Required Properties:
+- compatible must be toradex,vf50-touchscreen
+- io-channels: adc channels being used by the Colibri VF50 module
+- xp-gpios: FET gate driver for input of X+
+- xm-gpios: FET gate driver for input of X-
+- yp-gpios: FET gate driver for input of Y+
+- ym-gpios: FET gate driver for input of Y-
+- interrupt-parent: phandle for the interrupt controller
+- interrupts: pen irq interrupt for touch detection
+- pinctrl-names: "idle", "default", "gpios"
+- pinctrl-0: pinctrl node for pen/touch detection state pinmux
+- pinctrl-1: pinctrl node for X/Y and pressure measurement (ADC) state pinmux
+- pinctrl-2: pinctrl node for gpios functioning as FET gate drivers
+- vf50-ts-min-pressure: pressure level at which to stop measuring X/Y values
+
+Example:
+
+ touchctrl: vf50_touchctrl {
+ compatible = "toradex,vf50-touchscreen";
+ io-channels = <&adc1 0>,<&adc0 0>,
+ <&adc0 1>,<&adc1 2>;
+ xp-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ xm-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+ yp-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "idle","default","gpios";
+ pinctrl-0 = <&pinctrl_touchctrl_idle>;
+ pinctrl-1 = <&pinctrl_touchctrl_default>;
+ pinctrl-2 = <&pinctrl_touchctrl_gpios>;
+ vf50-ts-min-pressure = <200>;
+ status = "disabled";
+ };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt b/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt
new file mode 100644
index 000000000000..853dff96dd9f
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt
@@ -0,0 +1,36 @@
+* Freescale i.MX6UL Touch Controller
+
+Required properties:
+- compatible: must be "fsl,imx6ul-tsc".
+- reg: this touch controller address and the ADC2 address.
+- interrupts: the interrupt of this touch controller and ADC2.
+- clocks: the root clock of touch controller and ADC2.
+- clock-names; must be "tsc" and "adc".
+- xnur-gpio: the X- gpio this controller connect to.
+ This xnur-gpio returns to low once the finger leave the touch screen (The
+ last touch event the touch controller capture).
+
+Optional properties:
+- measure-delay-time: the value of measure delay time.
+ Before X-axis or Y-axis measurement, the screen need some time before
+ even potential distribution ready.
+ This value depends on the touch screen.
+- pre-charge-time: the touch screen need some time to precharge.
+ This value depends on the touch screen.
+
+Example:
+ tsc: tsc@02040000 {
+ compatible = "fsl,imx6ul-tsc";
+ reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_IPG>,
+ <&clks IMX6UL_CLK_ADC2>;
+ clock-names = "tsc", "adc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tsc>;
+ xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+ measure-delay-time = <0xfff>;
+ pre-charge-time = <0xffff>;
+ status = "okay";
+ };