diff options
Diffstat (limited to 'Documentation')
274 files changed, 9912 insertions, 826 deletions
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index f607367e642f..c17cd4bb2290 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -206,8 +206,8 @@ laptops/ - directory with laptop related info and laptop driver documentation. ldm.txt - a brief description of LDM (Windows Dynamic Disks). -leds-class.txt - - documents LED handling under Linux. +leds/ + - directory with info about LED handling under Linux. local_ops.txt - semantics and behavior of local atomic operations. lockdep-design.txt diff --git a/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-koneplus b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-koneplus new file mode 100644 index 000000000000..c2a270b45b03 --- /dev/null +++ b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-koneplus @@ -0,0 +1,10 @@ +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/startup_profile +Date: October 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The integer value of this attribute ranges from 0-4. + When read, this attribute returns the number of the actual + profile. This value is persistent, so its equivalent to the + profile that's active when the mouse is powered on next time. + When written, this file sets the number of the startup profile + and the mouse activates this profile immediately. + Please use actual_profile, it does the same thing. diff --git a/Documentation/ABI/stable/sysfs-class-backlight b/Documentation/ABI/stable/sysfs-class-backlight index 4d637e1c4ff7..70302f370e7e 100644 --- a/Documentation/ABI/stable/sysfs-class-backlight +++ b/Documentation/ABI/stable/sysfs-class-backlight @@ -34,3 +34,23 @@ Contact: Richard Purdie <rpurdie@rpsys.net> Description: Maximum brightness for <backlight>. Users: HAL + +What: /sys/class/backlight/<backlight>/type +Date: September 2010 +KernelVersion: 2.6.37 +Contact: Matthew Garrett <mjg@redhat.com> +Description: + The type of interface controlled by <backlight>. + "firmware": The driver uses a standard firmware interface + "platform": The driver uses a platform-specific interface + "raw": The driver controls hardware registers directly + + In the general case, when multiple backlight + interfaces are available for a single device, firmware + control should be preferred to platform control should + be preferred to raw control. Using a firmware + interface reduces the probability of confusion with + the hardware and the OS independently updating the + backlight state. Platform interfaces are mostly a + holdover from pre-standardisation of firmware + interfaces. diff --git a/Documentation/ABI/testing/configfs-spear-pcie-gadget b/Documentation/ABI/testing/configfs-spear-pcie-gadget new file mode 100644 index 000000000000..875988146a63 --- /dev/null +++ b/Documentation/ABI/testing/configfs-spear-pcie-gadget @@ -0,0 +1,31 @@ +What: /config/pcie-gadget +Date: Feb 2011 +KernelVersion: 2.6.37 +Contact: Pratyush Anand <pratyush.anand@st.com> +Description: + + Interface is used to configure selected dual mode PCIe controller + as device and then program its various registers to configure it + as a particular device type. + This interfaces can be used to show spear's PCIe device capability. + + Nodes are only visible when configfs is mounted. To mount configfs + in /config directory use: + # mount -t configfs none /config/ + + For nth PCIe Device Controller + /config/pcie-gadget.n/ + link ... used to enable ltssm and read its status. + int_type ...used to configure and read type of supported + interrupt + no_of_msi ... used to configure number of MSI vector needed and + to read no of MSI granted. + inta ... write 1 to assert INTA and 0 to de-assert. + send_msi ... write MSI vector to be sent. + vendor_id ... used to write and read vendor id (hex) + device_id ... used to write and read device id (hex) + bar0_size ... used to write and read bar0_size + bar0_address ... used to write and read bar0 mapped area in hex. + bar0_rw_offset ... used to write and read offset of bar0 where + bar0_data will be written or read. + bar0_data ... used to write and read data at bar0_rw_offset. diff --git a/Documentation/ABI/testing/pstore b/Documentation/ABI/testing/pstore index f1fb2a004264..ddf451ee2a08 100644 --- a/Documentation/ABI/testing/pstore +++ b/Documentation/ABI/testing/pstore @@ -1,6 +1,6 @@ Where: /dev/pstore/... -Date: January 2011 -Kernel Version: 2.6.38 +Date: March 2011 +Kernel Version: 2.6.39 Contact: tony.luck@intel.com Description: Generic interface to platform dependent persistent storage. @@ -11,7 +11,7 @@ Description: Generic interface to platform dependent persistent storage. of the console log is captured, but other interesting data can also be saved. - # mount -t pstore - /dev/pstore + # mount -t pstore -o kmsg_bytes=8000 - /dev/pstore $ ls -l /dev/pstore total 0 @@ -33,3 +33,9 @@ Description: Generic interface to platform dependent persistent storage. will be saved elsewhere and erased from persistent store soon after boot to free up space ready for the next catastrophe. + + The 'kmsg_bytes' mount option changes the target amount of + data saved on each oops/panic. Pstore saves (possibly + multiple) files based on the record size of the underlying + persistent storage until at least this amount is reached. + Default is 10 Kbytes. diff --git a/Documentation/ABI/testing/sysfs-bus-css b/Documentation/ABI/testing/sysfs-bus-css index b585ec258a08..2979c40c10e9 100644 --- a/Documentation/ABI/testing/sysfs-bus-css +++ b/Documentation/ABI/testing/sysfs-bus-css @@ -29,7 +29,7 @@ Contact: Cornelia Huck <cornelia.huck@de.ibm.com> linux-s390@vger.kernel.org Description: Contains the PIM/PAM/POM values, as reported by the channel subsystem when last queried by the common I/O - layer (this implies that this attribute is not neccessarily + layer (this implies that this attribute is not necessarily in sync with the values current in the channel subsystem). Note: This is an I/O-subchannel specific attribute. Users: s390-tools, HAL diff --git a/Documentation/ABI/testing/sysfs-bus-media b/Documentation/ABI/testing/sysfs-bus-media new file mode 100644 index 000000000000..7057e574154a --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-media @@ -0,0 +1,6 @@ +What: /sys/bus/media/devices/.../model +Date: January 2011 +Contact: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + linux-media@vger.kernel.org +Description: Contains the device model name in UTF-8. The device version is + is not be appended to the model name. diff --git a/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss b/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss index 4f29e5f1ebfa..f5bb0a3bb8c0 100644 --- a/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss +++ b/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss @@ -59,3 +59,15 @@ Kernel Version: 2.6.31 Contact: iss_storagedev@hp.com Description: Displays the usage count (number of opens) of logical drive Y of controller X. + +Where: /sys/bus/pci/devices/<dev>/ccissX/resettable +Date: February 2011 +Kernel Version: 2.6.38 +Contact: iss_storagedev@hp.com +Description: Value of 1 indicates the controller can honor the reset_devices + kernel parameter. Value of 0 indicates reset_devices cannot be + honored. This is to allow, for example, kexec tools to be able + to warn the user if they designate an unresettable device as + a dump device, as kdump requires resetting the device in order + to work reliably. + diff --git a/Documentation/ABI/testing/sysfs-bus-rbd b/Documentation/ABI/testing/sysfs-bus-rbd index 90a87e2a572b..fa72ccb2282e 100644 --- a/Documentation/ABI/testing/sysfs-bus-rbd +++ b/Documentation/ABI/testing/sysfs-bus-rbd @@ -1,6 +1,6 @@ What: /sys/bus/rbd/ Date: November 2010 -Contact: Yehuda Sadeh <yehuda@hq.newdream.net>, +Contact: Yehuda Sadeh <yehuda@newdream.net>, Sage Weil <sage@newdream.net> Description: diff --git a/Documentation/ABI/testing/sysfs-class-led b/Documentation/ABI/testing/sysfs-class-led index edff6630c805..3646ec85d513 100644 --- a/Documentation/ABI/testing/sysfs-class-led +++ b/Documentation/ABI/testing/sysfs-class-led @@ -33,5 +33,5 @@ Contact: Richard Purdie <rpurdie@rpsys.net> Description: Invert the LED on/off state. This parameter is specific to gpio and backlight triggers. In case of the backlight trigger, - it is usefull when driving a LED which is intended to indicate + it is useful when driving a LED which is intended to indicate a device in a standby like state. diff --git a/Documentation/ABI/testing/sysfs-devices-mmc b/Documentation/ABI/testing/sysfs-devices-mmc new file mode 100644 index 000000000000..5a50ab655843 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-devices-mmc @@ -0,0 +1,21 @@ +What: /sys/devices/.../mmc_host/mmcX/mmcX:XXXX/enhanced_area_offset +Date: January 2011 +Contact: Chuanxiao Dong <chuanxiao.dong@intel.com> +Description: + Enhanced area is a new feature defined in eMMC4.4 standard. + eMMC4.4 or later card can support such feature. This kind of + area can help to improve the card performance. If the feature + is enabled, this attribute will indicate the start address of + enhanced data area. If not, this attribute will be -EINVAL. + Unit Byte. Format decimal. + +What: /sys/devices/.../mmc_host/mmcX/mmcX:XXXX/enhanced_area_size +Date: January 2011 +Contact: Chuanxiao Dong <chuanxiao.dong@intel.com> +Description: + Enhanced area is a new feature defined in eMMC4.4 standard. + eMMC4.4 or later card can support such feature. This kind of + area can help to improve the card performance. If the feature + is enabled, this attribute will indicate the size of enhanced + data area. If not, this attribute will be -EINVAL. + Unit KByte. Format decimal. diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone index b4c4f158ab9c..3ca3971109bf 100644 --- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone +++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone @@ -40,7 +40,7 @@ What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid- Date: March 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: The mouse can store 5 profiles which can be switched by the - press of a button. A profile holds informations like button + press of a button. A profile holds information like button mappings, sensitivity, the colors of the 5 leds and light effects. When read, these files return the respective profile. The diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus b/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus index 00efced73969..c1b53b8bc2ae 100644 --- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus +++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus @@ -1,9 +1,12 @@ What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/actual_profile Date: October 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> -Description: When read, this file returns the number of the actual profile in - range 0-4. - This file is readonly. +Description: The integer value of this attribute ranges from 0-4. + When read, this attribute returns the number of the actual + profile. This value is persistent, so its equivalent to the + profile that's active when the mouse is powered on next time. + When written, this file sets the number of the startup profile + and the mouse activates this profile immediately. Users: http://roccat.sourceforge.net What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/firmware_version @@ -33,7 +36,7 @@ Date: August 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: The mouse can store 5 profiles which can be switched by the press of a button. A profile is split in settings and buttons. - profile_buttons holds informations about button layout. + profile_buttons holds information about button layout. When written, this file lets one write the respective profile buttons back to the mouse. The data has to be 77 bytes long. The mouse will reject invalid data. @@ -47,7 +50,7 @@ Date: August 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: The mouse can store 5 profiles which can be switched by the press of a button. A profile is split in settings and buttons. - profile_buttons holds informations about button layout. + profile_buttons holds information about button layout. When read, these files return the respective profile buttons. The returned data is 77 bytes in size. This file is readonly. @@ -58,7 +61,7 @@ Date: October 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: The mouse can store 5 profiles which can be switched by the press of a button. A profile is split in settings and buttons. - profile_settings holds informations like resolution, sensitivity + profile_settings holds information like resolution, sensitivity and light effects. When written, this file lets one write the respective profile settings back to the mouse. The data has to be 43 bytes long. @@ -73,7 +76,7 @@ Date: August 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: The mouse can store 5 profiles which can be switched by the press of a button. A profile is split in settings and buttons. - profile_settings holds informations like resolution, sensitivity + profile_settings holds information like resolution, sensitivity and light effects. When read, these files return the respective profile settings. The returned data is 43 bytes in size. @@ -89,16 +92,6 @@ Description: The mouse has a tracking- and a distance-control-unit. These This file is writeonly. Users: http://roccat.sourceforge.net -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/startup_profile -Date: October 2010 -Contact: Stefan Achatz <erazor_de@users.sourceforge.net> -Description: The integer value of this attribute ranges from 0-4. - When read, this attribute returns the number of the profile - that's active when the mouse is powered on. - When written, this file sets the number of the startup profile - and the mouse activates this profile immediately. -Users: http://roccat.sourceforge.net - What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/tcu Date: October 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus index fdfa16f8189b..20f937c9d84f 100644 --- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus +++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus @@ -52,7 +52,7 @@ Date: January 2011 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: The mouse can store 5 profiles which can be switched by the press of a button. A profile is split in settings and buttons. - profile_buttons holds informations about button layout. + profile_buttons holds information about button layout. When written, this file lets one write the respective profile buttons back to the mouse. The data has to be 23 bytes long. The mouse will reject invalid data. @@ -66,7 +66,7 @@ Date: January 2011 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: The mouse can store 5 profiles which can be switched by the press of a button. A profile is split in settings and buttons. - profile_buttons holds informations about button layout. + profile_buttons holds information about button layout. When read, these files return the respective profile buttons. The returned data is 23 bytes in size. This file is readonly. @@ -77,7 +77,7 @@ Date: January 2011 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: The mouse can store 5 profiles which can be switched by the press of a button. A profile is split in settings and buttons. - profile_settings holds informations like resolution, sensitivity + profile_settings holds information like resolution, sensitivity and light effects. When written, this file lets one write the respective profile settings back to the mouse. The data has to be 16 bytes long. @@ -92,7 +92,7 @@ Date: January 2011 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: The mouse can store 5 profiles which can be switched by the press of a button. A profile is split in settings and buttons. - profile_settings holds informations like resolution, sensitivity + profile_settings holds information like resolution, sensitivity and light effects. When read, these files return the respective profile settings. The returned data is 16 bytes in size. diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra b/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra index 5fab71af3c46..3f8de50e4ff1 100644 --- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra +++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra @@ -39,7 +39,7 @@ Date: August 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: The mouse can store 5 profiles which can be switched by the press of a button. A profile is split in settings and buttons. - profile_settings holds informations like resolution, sensitivity + profile_settings holds information like resolution, sensitivity and light effects. When written, this file lets one write the respective profile settings back to the mouse. The data has to be 13 bytes long. @@ -54,7 +54,7 @@ Date: August 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: The mouse can store 5 profiles which can be switched by the press of a button. A profile is split in settings and buttons. - profile_settings holds informations like resolution, sensitivity + profile_settings holds information like resolution, sensitivity and light effects. When read, these files return the respective profile settings. The returned data is 13 bytes in size. @@ -66,7 +66,7 @@ Date: August 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: The mouse can store 5 profiles which can be switched by the press of a button. A profile is split in settings and buttons. - profile_buttons holds informations about button layout. + profile_buttons holds information about button layout. When written, this file lets one write the respective profile buttons back to the mouse. The data has to be 19 bytes long. The mouse will reject invalid data. @@ -80,7 +80,7 @@ Date: August 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: The mouse can store 5 profiles which can be switched by the press of a button. A profile is split in settings and buttons. - profile_buttons holds informations about button layout. + profile_buttons holds information about button layout. When read, these files return the respective profile buttons. The returned data is 19 bytes in size. This file is readonly. diff --git a/Documentation/ABI/testing/sysfs-driver-samsung-laptop b/Documentation/ABI/testing/sysfs-driver-samsung-laptop new file mode 100644 index 000000000000..0a810231aad4 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-samsung-laptop @@ -0,0 +1,19 @@ +What: /sys/devices/platform/samsung/performance_level +Date: January 1, 2010 +KernelVersion: 2.6.33 +Contact: Greg Kroah-Hartman <gregkh@suse.de> +Description: Some Samsung laptops have different "performance levels" + that are can be modified by a function key, and by this + sysfs file. These values don't always make a whole lot + of sense, but some users like to modify them to keep + their fans quiet at all costs. Reading from this file + will show the current performance level. Writing to the + file can change this value. + Valid options: + "silent" + "normal" + "overclock" + Note that not all laptops support all of these options. + Specifically, not all support the "overclock" option, + and it's still unknown if this value even changes + anything, other than making the user feel a bit better. diff --git a/Documentation/ABI/testing/sysfs-fs-ext4 b/Documentation/ABI/testing/sysfs-fs-ext4 index 5fb709997d96..f22ac0872ae8 100644 --- a/Documentation/ABI/testing/sysfs-fs-ext4 +++ b/Documentation/ABI/testing/sysfs-fs-ext4 @@ -48,7 +48,7 @@ Description: will have its blocks allocated out of its own unique preallocation pool. -What: /sys/fs/ext4/<disk>/inode_readahead +What: /sys/fs/ext4/<disk>/inode_readahead_blks Date: March 2008 Contact: "Theodore Ts'o" <tytso@mit.edu> Description: @@ -85,7 +85,14 @@ Date: June 2008 Contact: "Theodore Ts'o" <tytso@mit.edu> Description: Tuning parameter which (if non-zero) controls the goal - inode used by the inode allocator in p0reference to - all other allocation hueristics. This is intended for + inode used by the inode allocator in preference to + all other allocation heuristics. This is intended for debugging use only, and should be 0 on production systems. + +What: /sys/fs/ext4/<disk>/max_writeback_mb_bump +Date: September 2009 +Contact: "Theodore Ts'o" <tytso@mit.edu> +Description: + The maximum number of megabytes the writeback code will + try to write out before move on to another inode. diff --git a/Documentation/ABI/testing/sysfs-fs-pstore b/Documentation/ABI/testing/sysfs-fs-pstore deleted file mode 100644 index 8e659d854805..000000000000 --- a/Documentation/ABI/testing/sysfs-fs-pstore +++ /dev/null @@ -1,7 +0,0 @@ -What: /sys/fs/pstore/kmsg_bytes -Date: January 2011 -Kernel Version: 2.6.38 -Contact: "Tony Luck" <tony.luck@intel.com> -Description: - Controls amount of console log that will be saved - to persistent store on oops/panic. diff --git a/Documentation/ABI/testing/sysfs-platform-asus-laptop b/Documentation/ABI/testing/sysfs-platform-asus-laptop index 41ff8ae4dee0..cd9d667c3da2 100644 --- a/Documentation/ABI/testing/sysfs-platform-asus-laptop +++ b/Documentation/ABI/testing/sysfs-platform-asus-laptop @@ -27,7 +27,7 @@ KernelVersion: 2.6.20 Contact: "Corentin Chary" <corentincj@iksaif.net> Description: Some models like the W1N have a LED display that can be - used to display several informations. + used to display several items of information. To control the LED display, use the following : echo 0x0T000DDD > /sys/devices/platform/asus_laptop/ where T control the 3 letters display, and DDD the 3 digits display. diff --git a/Documentation/ABI/testing/sysfs-platform-asus-wmi b/Documentation/ABI/testing/sysfs-platform-asus-wmi new file mode 100644 index 000000000000..2e7df91620de --- /dev/null +++ b/Documentation/ABI/testing/sysfs-platform-asus-wmi @@ -0,0 +1,31 @@ +What: /sys/devices/platform/<platform>/cpufv +Date: Oct 2010 +KernelVersion: 2.6.37 +Contact: "Corentin Chary" <corentincj@iksaif.net> +Description: + Change CPU clock configuration (write-only). + There are three available clock configuration: + * 0 -> Super Performance Mode + * 1 -> High Performance Mode + * 2 -> Power Saving Mode + +What: /sys/devices/platform/<platform>/camera +Date: Jan 2010 +KernelVersion: 2.6.39 +Contact: "Corentin Chary" <corentincj@iksaif.net> +Description: + Control the camera. 1 means on, 0 means off. + +What: /sys/devices/platform/<platform>/cardr +Date: Jan 2010 +KernelVersion: 2.6.39 +Contact: "Corentin Chary" <corentincj@iksaif.net> +Description: + Control the card reader. 1 means on, 0 means off. + +What: /sys/devices/platform/<platform>/touchpad +Date: Jan 2010 +KernelVersion: 2.6.39 +Contact: "Corentin Chary" <corentincj@iksaif.net> +Description: + Control the card touchpad. 1 means on, 0 means off. diff --git a/Documentation/ABI/testing/sysfs-platform-eeepc-wmi b/Documentation/ABI/testing/sysfs-platform-eeepc-wmi deleted file mode 100644 index e4b5fef5fadd..000000000000 --- a/Documentation/ABI/testing/sysfs-platform-eeepc-wmi +++ /dev/null @@ -1,10 +0,0 @@ -What: /sys/devices/platform/eeepc-wmi/cpufv -Date: Oct 2010 -KernelVersion: 2.6.37 -Contact: "Corentin Chary" <corentincj@iksaif.net> -Description: - Change CPU clock configuration (write-only). - There are three available clock configuration: - * 0 -> Super Performance Mode - * 1 -> High Performance Mode - * 2 -> Power Saving Mode diff --git a/Documentation/Changes b/Documentation/Changes index 4fb88f15f2ef..5f4828a034e3 100644 --- a/Documentation/Changes +++ b/Documentation/Changes @@ -35,7 +35,7 @@ o util-linux 2.10o # fdformat --version o module-init-tools 0.9.10 # depmod -V o e2fsprogs 1.41.4 # e2fsck -V o jfsutils 1.1.3 # fsck.jfs -V -o reiserfsprogs 3.6.3 # reiserfsck -V 2>&1|grep reiserfsprogs +o reiserfsprogs 3.6.3 # reiserfsck -V o xfsprogs 2.6.0 # xfs_db -V o squashfs-tools 4.0 # mksquashfs -version o btrfs-progs 0.18 # btrfsck @@ -46,9 +46,9 @@ o isdn4k-utils 3.1pre1 # isdnctrl 2>&1|grep version o nfs-utils 1.0.5 # showmount --version o procps 3.2.0 # ps --version o oprofile 0.9 # oprofiled --version -o udev 081 # udevinfo -V -o grub 0.93 # grub --version -o mcelog 0.6 +o udev 081 # udevd --version +o grub 0.93 # grub --version || grub-install --version +o mcelog 0.6 # mcelog --version o iptables 1.4.2 # iptables -V diff --git a/Documentation/CodingStyle b/Documentation/CodingStyle index 1cd3478e5834..58b0bf917834 100644 --- a/Documentation/CodingStyle +++ b/Documentation/CodingStyle @@ -168,6 +168,13 @@ Do not unnecessarily use braces where a single statement will do. if (condition) action(); +and + +if (condition) + do_this(); +else + do_that(); + This does not apply if one branch of a conditional statement is a single statement. Use braces in both branches. diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index 8b6e00a71034..8436b018c289 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -53,7 +53,9 @@ MAN := $(patsubst %.xml, %.9, $(BOOKS)) mandocs: $(MAN) build_images = mkdir -p $(objtree)/Documentation/DocBook/media/ && \ - cp $(srctree)/Documentation/DocBook/dvb/*.png $(srctree)/Documentation/DocBook/v4l/*.gif $(objtree)/Documentation/DocBook/media/ + cp $(srctree)/Documentation/DocBook/dvb/*.png \ + $(srctree)/Documentation/DocBook/v4l/*.gif \ + $(objtree)/Documentation/DocBook/media/ xmldoclinks: ifneq ($(objtree),$(srctree)) diff --git a/Documentation/DocBook/dvb/dvbproperty.xml b/Documentation/DocBook/dvb/dvbproperty.xml index 5f57c7ccd4ba..97f397e2fb3a 100644 --- a/Documentation/DocBook/dvb/dvbproperty.xml +++ b/Documentation/DocBook/dvb/dvbproperty.xml @@ -40,7 +40,7 @@ <para>Central frequency of the channel.</para> - <para>For ISDB-T the channels are usally transmitted with an offset of 143kHz. E.g. a + <para>For ISDB-T the channels are usually transmitted with an offset of 143kHz. E.g. a valid frequncy could be 474143 kHz. The stepping is bound to the bandwidth of the channel which is 6MHz.</para> diff --git a/Documentation/DocBook/dvb/frontend.xml b/Documentation/DocBook/dvb/frontend.xml index 78d756de5906..60c6976fb311 100644 --- a/Documentation/DocBook/dvb/frontend.xml +++ b/Documentation/DocBook/dvb/frontend.xml @@ -139,7 +139,7 @@ consistently to the DiSEqC commands as described in the DiSEqC spec.</para> <section id="frontend_sec_tone"> <title>SEC continuous tone</title> -<para>The continous 22KHz tone is usually used with non-DiSEqC capable LNBs to switch the +<para>The continuous 22KHz tone is usually used with non-DiSEqC capable LNBs to switch the high/low band of a dual-band LNB. When using DiSEqC epuipment this voltage has to be switched consistently to the DiSEqC commands as described in the DiSEqC spec.</para> diff --git a/Documentation/DocBook/kernel-locking.tmpl b/Documentation/DocBook/kernel-locking.tmpl index f66f4df18690..67e7ab41c0a6 100644 --- a/Documentation/DocBook/kernel-locking.tmpl +++ b/Documentation/DocBook/kernel-locking.tmpl @@ -1763,7 +1763,7 @@ as it would be on UP. There is a furthur optimization possible here: remember our original cache code, where there were no reference counts and the caller simply held the lock whenever using the object? This is still possible: if -you hold the lock, noone can delete the object, so you don't need to +you hold the lock, no one can delete the object, so you don't need to get and put the reference count. </para> diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl index 8c5411cfeaf0..cdd1bb9aac0d 100644 --- a/Documentation/DocBook/libata.tmpl +++ b/Documentation/DocBook/libata.tmpl @@ -1032,7 +1032,7 @@ and other resources, etc. <listitem> <para> This is indicated by ICRC bit in the ERROR register and - means that corruption occurred during data transfer. Upto + means that corruption occurred during data transfer. Up to ATA/ATAPI-7, the standard specifies that this bit is only applicable to UDMA transfers but ATA/ATAPI-8 draft revision 1f says that the bit may be applicable to multiword DMA and @@ -1045,10 +1045,10 @@ and other resources, etc. <term>ABRT error during data transfer or on completion</term> <listitem> <para> - Upto ATA/ATAPI-7, the standard specifies that ABRT could be + Up to ATA/ATAPI-7, the standard specifies that ABRT could be set on ICRC errors and on cases where a device is not able to complete a command. Combined with the fact that MWDMA - and PIO transfer errors aren't allowed to use ICRC bit upto + and PIO transfer errors aren't allowed to use ICRC bit up to ATA/ATAPI-7, it seems to imply that ABRT bit alone could indicate tranfer errors. </para> @@ -1122,7 +1122,7 @@ and other resources, etc. <para> Depending on commands, not all STATUS/ERROR bits are applicable. These non-applicable bits are marked with - "na" in the output descriptions but upto ATA/ATAPI-7 + "na" in the output descriptions but up to ATA/ATAPI-7 no definition of "na" can be found. However, ATA/ATAPI-8 draft revision 1f describes "N/A" as follows. @@ -1507,7 +1507,7 @@ and other resources, etc. <listitem> <para> - CHS set up with INITIALIZE DEVICE PARAMETERS (seldomly used) + CHS set up with INITIALIZE DEVICE PARAMETERS (seldom used) </para> </listitem> diff --git a/Documentation/DocBook/media-entities.tmpl b/Documentation/DocBook/media-entities.tmpl index be34dcbe0d90..fea63b45471a 100644 --- a/Documentation/DocBook/media-entities.tmpl +++ b/Documentation/DocBook/media-entities.tmpl @@ -11,6 +11,10 @@ <!ENTITY func-select "<link linkend='func-select'><function>select()</function></link>"> <!ENTITY func-write "<link linkend='func-write'><function>write()</function></link>"> +<!ENTITY media-func-close "<link linkend='media-func-close'><function>close()</function></link>"> +<!ENTITY media-func-ioctl "<link linkend='media-func-ioctl'><function>ioctl()</function></link>"> +<!ENTITY media-func-open "<link linkend='media-func-open'><function>open()</function></link>"> + <!-- Ioctls --> <!ENTITY VIDIOC-CROPCAP "<link linkend='vidioc-cropcap'><constant>VIDIOC_CROPCAP</constant></link>"> <!ENTITY VIDIOC-DBG-G-CHIP-IDENT "<link linkend='vidioc-dbg-g-chip-ident'><constant>VIDIOC_DBG_G_CHIP_IDENT</constant></link>"> @@ -82,11 +86,24 @@ <!ENTITY VIDIOC-S-PRIORITY "<link linkend='vidioc-g-priority'><constant>VIDIOC_S_PRIORITY</constant></link>"> <!ENTITY VIDIOC-S-STD "<link linkend='vidioc-g-std'><constant>VIDIOC_S_STD</constant></link>"> <!ENTITY VIDIOC-S-TUNER "<link linkend='vidioc-g-tuner'><constant>VIDIOC_S_TUNER</constant></link>"> +<!ENTITY VIDIOC-SUBDEV-ENUM-FRAME-SIZE "<link linkend='vidioc-subdev-enum-frame-size'><constant>VIDIOC_SUBDEV_ENUM_FRAME_SIZE</constant></link>"> +<!ENTITY VIDIOC-SUBDEV-ENUM-MBUS-CODE "<link linkend='vidioc-subdev-enum-mbus-code'><constant>VIDIOC_SUBDEV_ENUM_MBUS_CODE</constant></link>"> +<!ENTITY VIDIOC-SUBDEV-G-CROP "<link linkend='vidioc-subdev-g-crop'><constant>VIDIOC_SUBDEV_G_CROP</constant></link>"> +<!ENTITY VIDIOC-SUBDEV-G-FMT "<link linkend='vidioc-subdev-g-fmt'><constant>VIDIOC_SUBDEV_G_FMT</constant></link>"> +<!ENTITY VIDIOC-SUBDEV-G-FRAME-INTERVAL "<link linkend='vidioc-subdev-g-frame-interval'><constant>VIDIOC_SUBDEV_G_FRAME_INTERVAL</constant></link>"> +<!ENTITY VIDIOC-SUBDEV-S-CROP "<link linkend='vidioc-subdev-g-crop'><constant>VIDIOC_SUBDEV_S_CROP</constant></link>"> +<!ENTITY VIDIOC-SUBDEV-S-FMT "<link linkend='vidioc-subdev-g-fmt'><constant>VIDIOC_SUBDEV_S_FMT</constant></link>"> +<!ENTITY VIDIOC-SUBDEV-S-FRAME-INTERVAL "<link linkend='vidioc-subdev-g-frame-interval'><constant>VIDIOC_SUBDEV_S_FRAME_INTERVAL</constant></link>"> <!ENTITY VIDIOC-TRY-ENCODER-CMD "<link linkend='vidioc-encoder-cmd'><constant>VIDIOC_TRY_ENCODER_CMD</constant></link>"> <!ENTITY VIDIOC-TRY-EXT-CTRLS "<link linkend='vidioc-g-ext-ctrls'><constant>VIDIOC_TRY_EXT_CTRLS</constant></link>"> <!ENTITY VIDIOC-TRY-FMT "<link linkend='vidioc-g-fmt'><constant>VIDIOC_TRY_FMT</constant></link>"> <!ENTITY VIDIOC-UNSUBSCRIBE-EVENT "<link linkend='vidioc-subscribe-event'><constant>VIDIOC_UNSUBSCRIBE_EVENT</constant></link>"> +<!ENTITY MEDIA-IOC-DEVICE-INFO "<link linkend='media-ioc-device-info'><constant>MEDIA_IOC_DEVICE_INFO</constant></link>"> +<!ENTITY MEDIA-IOC-ENUM-ENTITIES "<link linkend='media-ioc-enum-entities'><constant>MEDIA_IOC_ENUM_ENTITIES</constant></link>"> +<!ENTITY MEDIA-IOC-ENUM-LINKS "<link linkend='media-ioc-enum-links'><constant>MEDIA_IOC_ENUM_LINKS</constant></link>"> +<!ENTITY MEDIA-IOC-SETUP-LINK "<link linkend='media-ioc-setup-link'><constant>MEDIA_IOC_SETUP_LINK</constant></link>"> + <!-- Types --> <!ENTITY v4l2-std-id "<link linkend='v4l2-std-id'>v4l2_std_id</link>"> @@ -98,6 +115,7 @@ <!ENTITY v4l2-field "enum <link linkend='v4l2-field'>v4l2_field</link>"> <!ENTITY v4l2-frmivaltypes "enum <link linkend='v4l2-frmivaltypes'>v4l2_frmivaltypes</link>"> <!ENTITY v4l2-frmsizetypes "enum <link linkend='v4l2-frmsizetypes'>v4l2_frmsizetypes</link>"> +<!ENTITY v4l2-mbus-pixelcode "enum <link linkend='v4l2-mbus-pixelcode'>v4l2_mbus_pixelcode</link>"> <!ENTITY v4l2-memory "enum <link linkend='v4l2-memory'>v4l2_memory</link>"> <!ENTITY v4l2-mpeg-audio-ac3-bitrate "enum <link linkend='v4l2-mpeg-audio-ac3-bitrate'>v4l2_mpeg_audio_ac3_bitrate</link>"> <!ENTITY v4l2-mpeg-audio-crc "enum <link linkend='v4l2-mpeg-audio-crc'>v4l2_mpeg_audio_crc</link>"> @@ -121,6 +139,7 @@ <!ENTITY v4l2-mpeg-video-encoding "enum <link linkend='v4l2-mpeg-video-encoding'>v4l2_mpeg_video_encoding</link>"> <!ENTITY v4l2-power-line-frequency "enum <link linkend='v4l2-power-line-frequency'>v4l2_power_line_frequency</link>"> <!ENTITY v4l2-priority "enum <link linkend='v4l2-priority'>v4l2_priority</link>"> +<!ENTITY v4l2-subdev-format-whence "enum <link linkend='v4l2-subdev-format-whence'>v4l2_subdev_format_whence</link>"> <!ENTITY v4l2-tuner-type "enum <link linkend='v4l2-tuner-type'>v4l2_tuner_type</link>"> <!ENTITY v4l2-preemphasis "enum <link linkend='v4l2-preemphasis'>v4l2_preemphasis</link>"> @@ -129,6 +148,7 @@ <!ENTITY v4l2-audioout "struct <link linkend='v4l2-audioout'>v4l2_audioout</link>"> <!ENTITY v4l2-bt-timings "struct <link linkend='v4l2-bt-timings'>v4l2_bt_timings</link>"> <!ENTITY v4l2-buffer "struct <link linkend='v4l2-buffer'>v4l2_buffer</link>"> +<!ENTITY v4l2-plane "struct <link linkend='v4l2-plane'>v4l2_plane</link>"> <!ENTITY v4l2-capability "struct <link linkend='v4l2-capability'>v4l2_capability</link>"> <!ENTITY v4l2-captureparm "struct <link linkend='v4l2-captureparm'>v4l2_captureparm</link>"> <!ENTITY v4l2-clip "struct <link linkend='v4l2-clip'>v4l2_clip</link>"> @@ -162,11 +182,14 @@ <!ENTITY v4l2-hw-freq-seek "struct <link linkend='v4l2-hw-freq-seek'>v4l2_hw_freq_seek</link>"> <!ENTITY v4l2-input "struct <link linkend='v4l2-input'>v4l2_input</link>"> <!ENTITY v4l2-jpegcompression "struct <link linkend='v4l2-jpegcompression'>v4l2_jpegcompression</link>"> +<!ENTITY v4l2-mbus-framefmt "struct <link linkend='v4l2-mbus-framefmt'>v4l2_mbus_framefmt</link>"> <!ENTITY v4l2-modulator "struct <link linkend='v4l2-modulator'>v4l2_modulator</link>"> <!ENTITY v4l2-mpeg-vbi-fmt-ivtv "struct <link linkend='v4l2-mpeg-vbi-fmt-ivtv'>v4l2_mpeg_vbi_fmt_ivtv</link>"> <!ENTITY v4l2-output "struct <link linkend='v4l2-output'>v4l2_output</link>"> <!ENTITY v4l2-outputparm "struct <link linkend='v4l2-outputparm'>v4l2_outputparm</link>"> <!ENTITY v4l2-pix-format "struct <link linkend='v4l2-pix-format'>v4l2_pix_format</link>"> +<!ENTITY v4l2-pix-format-mplane "struct <link linkend='v4l2-pix-format-mplane'>v4l2_pix_format_mplane</link>"> +<!ENTITY v4l2-plane-pix-format "struct <link linkend='v4l2-plane-pix-format'>v4l2_plane_pix_format</link>"> <!ENTITY v4l2-queryctrl "struct <link linkend='v4l2-queryctrl'>v4l2_queryctrl</link>"> <!ENTITY v4l2-querymenu "struct <link linkend='v4l2-querymenu'>v4l2_querymenu</link>"> <!ENTITY v4l2-rect "struct <link linkend='v4l2-rect'>v4l2_rect</link>"> @@ -174,6 +197,12 @@ <!ENTITY v4l2-sliced-vbi-cap "struct <link linkend='v4l2-sliced-vbi-cap'>v4l2_sliced_vbi_cap</link>"> <!ENTITY v4l2-sliced-vbi-data "struct <link linkend='v4l2-sliced-vbi-data'>v4l2_sliced_vbi_data</link>"> <!ENTITY v4l2-sliced-vbi-format "struct <link linkend='v4l2-sliced-vbi-format'>v4l2_sliced_vbi_format</link>"> +<!ENTITY v4l2-subdev-frame-interval "struct <link linkend='v4l2-subdev-frame-interval'>v4l2_subdev_frame_interval</link>"> +<!ENTITY v4l2-subdev-frame-interval-enum "struct <link linkend='v4l2-subdev-frame-interval-enum'>v4l2_subdev_frame_interval_enum</link>"> +<!ENTITY v4l2-subdev-frame-size-enum "struct <link linkend='v4l2-subdev-frame-size-enum'>v4l2_subdev_frame_size_enum</link>"> +<!ENTITY v4l2-subdev-crop "struct <link linkend='v4l2-subdev-crop'>v4l2_subdev_crop</link>"> +<!ENTITY v4l2-subdev-format "struct <link linkend='v4l2-subdev-format'>v4l2_subdev_format</link>"> +<!ENTITY v4l2-subdev-mbus-code-enum "struct <link linkend='v4l2-subdev-mbus-code-enum'>v4l2_subdev_mbus_code_enum</link>"> <!ENTITY v4l2-standard "struct <link linkend='v4l2-standard'>v4l2_standard</link>"> <!ENTITY v4l2-streamparm "struct <link linkend='v4l2-streamparm'>v4l2_streamparm</link>"> <!ENTITY v4l2-timecode "struct <link linkend='v4l2-timecode'>v4l2_timecode</link>"> @@ -181,6 +210,12 @@ <!ENTITY v4l2-vbi-format "struct <link linkend='v4l2-vbi-format'>v4l2_vbi_format</link>"> <!ENTITY v4l2-window "struct <link linkend='v4l2-window'>v4l2_window</link>"> +<!ENTITY media-device-info "struct <link linkend='media-device-info'>media_device_info</link>"> +<!ENTITY media-entity-desc "struct <link linkend='media-entity-desc'>media_entity_desc</link>"> +<!ENTITY media-links-enum "struct <link linkend='media-links-enum'>media_links_enum</link>"> +<!ENTITY media-pad-desc "struct <link linkend='media-pad-desc'>media_pad_desc</link>"> +<!ENTITY media-link-desc "struct <link linkend='media-link-desc'>media_link_desc</link>"> + <!-- Error Codes --> <!ENTITY EACCES "<errorcode>EACCES</errorcode> error code"> <!ENTITY EAGAIN "<errorcode>EAGAIN</errorcode> error code"> @@ -197,11 +232,13 @@ <!ENTITY ENXIO "<errorcode>ENXIO</errorcode> error code"> <!ENTITY EMFILE "<errorcode>EMFILE</errorcode> error code"> <!ENTITY EPERM "<errorcode>EPERM</errorcode> error code"> +<!ENTITY EPIPE "<errorcode>EPIPE</errorcode> error code"> <!ENTITY ERANGE "<errorcode>ERANGE</errorcode> error code"> <!-- Subsections --> <!ENTITY sub-biblio SYSTEM "v4l/biblio.xml"> <!ENTITY sub-common SYSTEM "v4l/common.xml"> +<!ENTITY sub-planar-apis SYSTEM "v4l/planar-apis.xml"> <!ENTITY sub-compat SYSTEM "v4l/compat.xml"> <!ENTITY sub-controls SYSTEM "v4l/controls.xml"> <!ENTITY sub-dev-capture SYSTEM "v4l/dev-capture.xml"> @@ -215,6 +252,7 @@ <!ENTITY sub-dev-raw-vbi SYSTEM "v4l/dev-raw-vbi.xml"> <!ENTITY sub-dev-rds SYSTEM "v4l/dev-rds.xml"> <!ENTITY sub-dev-sliced-vbi SYSTEM "v4l/dev-sliced-vbi.xml"> +<!ENTITY sub-dev-subdev SYSTEM "v4l/dev-subdev.xml"> <!ENTITY sub-dev-teletext SYSTEM "v4l/dev-teletext.xml"> <!ENTITY sub-driver SYSTEM "v4l/driver.xml"> <!ENTITY sub-libv4l SYSTEM "v4l/libv4l.xml"> @@ -233,6 +271,8 @@ <!ENTITY sub-io SYSTEM "v4l/io.xml"> <!ENTITY sub-grey SYSTEM "v4l/pixfmt-grey.xml"> <!ENTITY sub-nv12 SYSTEM "v4l/pixfmt-nv12.xml"> +<!ENTITY sub-nv12m SYSTEM "v4l/pixfmt-nv12m.xml"> +<!ENTITY sub-nv12mt SYSTEM "v4l/pixfmt-nv12mt.xml"> <!ENTITY sub-nv16 SYSTEM "v4l/pixfmt-nv16.xml"> <!ENTITY sub-packed-rgb SYSTEM "v4l/pixfmt-packed-rgb.xml"> <!ENTITY sub-packed-yuv SYSTEM "v4l/pixfmt-packed-yuv.xml"> @@ -247,12 +287,14 @@ <!ENTITY sub-yuv410 SYSTEM "v4l/pixfmt-yuv410.xml"> <!ENTITY sub-yuv411p SYSTEM "v4l/pixfmt-yuv411p.xml"> <!ENTITY sub-yuv420 SYSTEM "v4l/pixfmt-yuv420.xml"> +<!ENTITY sub-yuv420m SYSTEM "v4l/pixfmt-yuv420m.xml"> <!ENTITY sub-yuv422p SYSTEM "v4l/pixfmt-yuv422p.xml"> <!ENTITY sub-yuyv SYSTEM "v4l/pixfmt-yuyv.xml"> <!ENTITY sub-yvyu SYSTEM "v4l/pixfmt-yvyu.xml"> <!ENTITY sub-srggb10 SYSTEM "v4l/pixfmt-srggb10.xml"> <!ENTITY sub-srggb8 SYSTEM "v4l/pixfmt-srggb8.xml"> <!ENTITY sub-y10 SYSTEM "v4l/pixfmt-y10.xml"> +<!ENTITY sub-y12 SYSTEM "v4l/pixfmt-y12.xml"> <!ENTITY sub-pixfmt SYSTEM "v4l/pixfmt.xml"> <!ENTITY sub-cropcap SYSTEM "v4l/vidioc-cropcap.xml"> <!ENTITY sub-dbg-g-register SYSTEM "v4l/vidioc-dbg-g-register.xml"> @@ -298,6 +340,13 @@ <!ENTITY sub-reqbufs SYSTEM "v4l/vidioc-reqbufs.xml"> <!ENTITY sub-s-hw-freq-seek SYSTEM "v4l/vidioc-s-hw-freq-seek.xml"> <!ENTITY sub-streamon SYSTEM "v4l/vidioc-streamon.xml"> +<!ENTITY sub-subdev-enum-frame-interval SYSTEM "v4l/vidioc-subdev-enum-frame-interval.xml"> +<!ENTITY sub-subdev-enum-frame-size SYSTEM "v4l/vidioc-subdev-enum-frame-size.xml"> +<!ENTITY sub-subdev-enum-mbus-code SYSTEM "v4l/vidioc-subdev-enum-mbus-code.xml"> +<!ENTITY sub-subdev-formats SYSTEM "v4l/subdev-formats.xml"> +<!ENTITY sub-subdev-g-crop SYSTEM "v4l/vidioc-subdev-g-crop.xml"> +<!ENTITY sub-subdev-g-fmt SYSTEM "v4l/vidioc-subdev-g-fmt.xml"> +<!ENTITY sub-subdev-g-frame-interval SYSTEM "v4l/vidioc-subdev-g-frame-interval.xml"> <!ENTITY sub-capture-c SYSTEM "v4l/capture.c.xml"> <!ENTITY sub-keytable-c SYSTEM "v4l/keytable.c.xml"> <!ENTITY sub-v4l2grab-c SYSTEM "v4l/v4l2grab.c.xml"> @@ -321,6 +370,15 @@ <!ENTITY sub-media-entities SYSTEM "media-entities.tmpl"> <!ENTITY sub-media-indices SYSTEM "media-indices.tmpl"> +<!ENTITY sub-media-controller SYSTEM "v4l/media-controller.xml"> +<!ENTITY sub-media-open SYSTEM "v4l/media-func-open.xml"> +<!ENTITY sub-media-close SYSTEM "v4l/media-func-close.xml"> +<!ENTITY sub-media-ioctl SYSTEM "v4l/media-func-ioctl.xml"> +<!ENTITY sub-media-ioc-device-info SYSTEM "v4l/media-ioc-device-info.xml"> +<!ENTITY sub-media-ioc-enum-entities SYSTEM "v4l/media-ioc-enum-entities.xml"> +<!ENTITY sub-media-ioc-enum-links SYSTEM "v4l/media-ioc-enum-links.xml"> +<!ENTITY sub-media-ioc-setup-link SYSTEM "v4l/media-ioc-setup-link.xml"> + <!-- Function Reference --> <!ENTITY close SYSTEM "v4l/func-close.xml"> <!ENTITY ioctl SYSTEM "v4l/func-ioctl.xml"> @@ -333,6 +391,7 @@ <!ENTITY write SYSTEM "v4l/func-write.xml"> <!ENTITY grey SYSTEM "v4l/pixfmt-grey.xml"> <!ENTITY nv12 SYSTEM "v4l/pixfmt-nv12.xml"> +<!ENTITY nv12m SYSTEM "v4l/pixfmt-nv12m.xml"> <!ENTITY nv16 SYSTEM "v4l/pixfmt-nv16.xml"> <!ENTITY packed-rgb SYSTEM "v4l/pixfmt-packed-rgb.xml"> <!ENTITY packed-yuv SYSTEM "v4l/pixfmt-packed-yuv.xml"> @@ -347,6 +406,7 @@ <!ENTITY yuv410 SYSTEM "v4l/pixfmt-yuv410.xml"> <!ENTITY yuv411p SYSTEM "v4l/pixfmt-yuv411p.xml"> <!ENTITY yuv420 SYSTEM "v4l/pixfmt-yuv420.xml"> +<!ENTITY yuv420m SYSTEM "v4l/pixfmt-yuv420m.xml"> <!ENTITY yuv422p SYSTEM "v4l/pixfmt-yuv422p.xml"> <!ENTITY yuyv SYSTEM "v4l/pixfmt-yuyv.xml"> <!ENTITY yvyu SYSTEM "v4l/pixfmt-yvyu.xml"> diff --git a/Documentation/DocBook/media.tmpl b/Documentation/DocBook/media.tmpl index a99088aae1aa..88f2cc680cc2 100644 --- a/Documentation/DocBook/media.tmpl +++ b/Documentation/DocBook/media.tmpl @@ -106,6 +106,9 @@ Foundation. A copy of the license is included in the chapter entitled &sub-remote_controllers; </chapter> </part> +<part id="media_common"> +&sub-media-controller; +</part> &sub-fdl-appendix; diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl index 620eb3f6a90a..6f242d5dee9a 100644 --- a/Documentation/DocBook/mtdnand.tmpl +++ b/Documentation/DocBook/mtdnand.tmpl @@ -485,7 +485,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip) Reed-Solomon library. </para> <para> - The ECC bytes must be placed immidiately after the data + The ECC bytes must be placed immediately after the data bytes in order to make the syndrome generator work. This is contrary to the usual layout used by software ECC. The separation of data and out of band area is not longer @@ -629,7 +629,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip) holds the bad block table. Store a pointer to the pattern in the pattern field. Further the length of the pattern has to be stored in len and the offset in the spare area must be given - in the offs member of the nand_bbt_descr stucture. For mirrored + in the offs member of the nand_bbt_descr structure. For mirrored bad block tables different patterns are mandatory.</para></listitem> <listitem><para>Table creation</para> <para>Set the option NAND_BBT_CREATE to enable the table creation @@ -648,7 +648,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip) <listitem><para>Table version control</para> <para>Set the option NAND_BBT_VERSION to enable the table version control. It's highly recommended to enable this for mirrored tables with write - support. It makes sure that the risk of loosing the bad block + support. It makes sure that the risk of losing the bad block table information is reduced to the loss of the information about the one worn out block which should be marked bad. The version is stored in 4 consecutive bytes in the spare area of the device. The position of @@ -1060,19 +1060,19 @@ data in this page</entry> <row> <entry>0x3D</entry> <entry>ECC byte 21</entry> -<entry>Error correction code byte 0 of the eigth 256 Bytes of data +<entry>Error correction code byte 0 of the eighth 256 Bytes of data in this page</entry> </row> <row> <entry>0x3E</entry> <entry>ECC byte 22</entry> -<entry>Error correction code byte 1 of the eigth 256 Bytes of data +<entry>Error correction code byte 1 of the eighth 256 Bytes of data in this page</entry> </row> <row> <entry>0x3F</entry> <entry>ECC byte 23</entry> -<entry>Error correction code byte 2 of the eigth 256 Bytes of data +<entry>Error correction code byte 2 of the eighth 256 Bytes of data in this page</entry> </row> </tbody></tgroup></informaltable> diff --git a/Documentation/DocBook/rapidio.tmpl b/Documentation/DocBook/rapidio.tmpl index 54eb26b57372..50479360d845 100644 --- a/Documentation/DocBook/rapidio.tmpl +++ b/Documentation/DocBook/rapidio.tmpl @@ -133,7 +133,6 @@ !Idrivers/rapidio/rio-sysfs.c </sect1> <sect1 id="PPC32_support"><title>PPC32 support</title> -!Earch/powerpc/sysdev/fsl_rio.c !Iarch/powerpc/sysdev/fsl_rio.c </sect1> </chapter> diff --git a/Documentation/DocBook/regulator.tmpl b/Documentation/DocBook/regulator.tmpl index 53f4f8d3b810..346e552fa2cc 100644 --- a/Documentation/DocBook/regulator.tmpl +++ b/Documentation/DocBook/regulator.tmpl @@ -267,8 +267,8 @@ <sect1 id="machine-constraint"> <title>Constraints</title> <para> - As well as definining the connections the machine interface - also provides constraints definining the operations that + As well as defining the connections the machine interface + also provides constraints defining the operations that clients are allowed to perform and the parameters that may be set. This is required since generally regulator devices will offer more flexibility than it is safe to use on a given diff --git a/Documentation/DocBook/uio-howto.tmpl b/Documentation/DocBook/uio-howto.tmpl index b4665b9c40b0..7c4b514d62b1 100644 --- a/Documentation/DocBook/uio-howto.tmpl +++ b/Documentation/DocBook/uio-howto.tmpl @@ -797,7 +797,7 @@ framework to set up sysfs files for this region. Simply leave it alone. perform some initialization. After that, your hardware starts working and will generate an interrupt as soon as it's finished, has some data available, or needs your - attention because an error occured. + attention because an error occurred. </para> <para> <filename>/dev/uioX</filename> is a read-only file. A diff --git a/Documentation/DocBook/usb.tmpl b/Documentation/DocBook/usb.tmpl index af293606fbe3..8d57c1888dca 100644 --- a/Documentation/DocBook/usb.tmpl +++ b/Documentation/DocBook/usb.tmpl @@ -690,7 +690,7 @@ usbdev_ioctl (int fd, int ifno, unsigned request, void *param) </para><para> This request lets kernel drivers talk to user mode code through filesystem operations even when they don't create - a charactor or block special device. + a character or block special device. It's also been used to do things like ask devices what device special file should be used. Two pre-defined ioctls are used diff --git a/Documentation/DocBook/v4l/bayer.pdf b/Documentation/DocBook/v4l/bayer.pdf Binary files differnew file mode 100644 index 000000000000..905e60e6cd42 --- /dev/null +++ b/Documentation/DocBook/v4l/bayer.pdf diff --git a/Documentation/DocBook/v4l/bayer.png b/Documentation/DocBook/v4l/bayer.png Binary files differnew file mode 100644 index 000000000000..9b15fb22e817 --- /dev/null +++ b/Documentation/DocBook/v4l/bayer.png diff --git a/Documentation/DocBook/v4l/common.xml b/Documentation/DocBook/v4l/common.xml index cea23e1c4fc6..9028721438dc 100644 --- a/Documentation/DocBook/v4l/common.xml +++ b/Documentation/DocBook/v4l/common.xml @@ -100,7 +100,7 @@ linux-kernel@vger.kernel.org, 2002-11-20. --></para> <para>By convention system administrators create various character device special files with these major and minor numbers in -the <filename>/dev</filename> directory. The names recomended for the +the <filename>/dev</filename> directory. The names recommended for the different V4L2 device types are listed in <xref linkend="devices" />. </para> @@ -846,6 +846,8 @@ conversion routine or library for integration into applications.</para> </section> </section> + &sub-planar-apis; + <section id="crop"> <title>Image Cropping, Insertion and Scaling</title> diff --git a/Documentation/DocBook/v4l/compat.xml b/Documentation/DocBook/v4l/compat.xml index c9ce61d981f5..9f7cd4f25792 100644 --- a/Documentation/DocBook/v4l/compat.xml +++ b/Documentation/DocBook/v4l/compat.xml @@ -1711,8 +1711,8 @@ ioctl would enumerate the available audio inputs. An ioctl to determine the current audio input, if more than one combines with the current video input, did not exist. So <constant>VIDIOC_G_AUDIO</constant> was renamed to -<constant>VIDIOC_G_AUDIO_OLD</constant>, this ioctl will be removed in -the future. The &VIDIOC-ENUMAUDIO; ioctl was added to enumerate +<constant>VIDIOC_G_AUDIO_OLD</constant>, this ioctl was removed on +Kernel 2.6.39. The &VIDIOC-ENUMAUDIO; ioctl was added to enumerate audio inputs, while &VIDIOC-G-AUDIO; now reports the current audio input.</para> <para>The same changes were made to &VIDIOC-G-AUDOUT; and @@ -1726,7 +1726,7 @@ must be updated to successfully compile again.</para> <para>The &VIDIOC-OVERLAY; ioctl was incorrectly defined with write-read parameter. It was changed to write-only, while the write-read version was renamed to <constant>VIDIOC_OVERLAY_OLD</constant>. The old -ioctl will be removed in the future. Until further the "videodev" +ioctl was removed on Kernel 2.6.39. Until further the "videodev" kernel module will automatically translate to the new version, so drivers must be recompiled, but not applications.</para> </listitem> @@ -1744,7 +1744,7 @@ surface can be seen.</para> defined with write-only parameter, inconsistent with other ioctls modifying their argument. They were changed to write-read, while a <constant>_OLD</constant> suffix was added to the write-only versions. -The old ioctls will be removed in the future. Drivers and +The old ioctls were removed on Kernel 2.6.39. Drivers and applications assuming a constant parameter need an update.</para> </listitem> </orderedlist> @@ -1815,8 +1815,8 @@ yet to be addressed, for details see <xref <para>The &VIDIOC-CROPCAP; ioctl was incorrectly defined with read-only parameter. It is now defined as write-read ioctl, while the read-only version was renamed to -<constant>VIDIOC_CROPCAP_OLD</constant>. The old ioctl will be removed -in the future.</para> +<constant>VIDIOC_CROPCAP_OLD</constant>. The old ioctl was removed +on Kernel 2.6.39.</para> </listitem> </orderedlist> </section> @@ -2353,6 +2353,20 @@ that used it. It was originally scheduled for removal in 2.6.35. </listitem> </orderedlist> </section> + <section> + <title>V4L2 in Linux 2.6.39</title> + <orderedlist> + <listitem> + <para>The old VIDIOC_*_OLD symbols and V4L1 support were removed.</para> + </listitem> + <listitem> + <para>Multi-planar API added. Does not affect the compatibility of + current drivers and applications. See + <link linkend="planar-apis">multi-planar API</link> + for details.</para> + </listitem> + </orderedlist> + </section> <section id="other"> <title>Relation of V4L2 to other Linux multimedia APIs</title> diff --git a/Documentation/DocBook/v4l/controls.xml b/Documentation/DocBook/v4l/controls.xml index 2fae3e87ce73..a920ee80f640 100644 --- a/Documentation/DocBook/v4l/controls.xml +++ b/Documentation/DocBook/v4l/controls.xml @@ -1243,7 +1243,7 @@ values are:</entry> </row><row><entry spanname="descr">Mutes the audio when capturing. This is not done by muting audio hardware, which can still produce a slight hiss, but in the encoder itself, guaranteeing a fixed -and reproducable audio bitstream. 0 = unmuted, 1 = muted.</entry> +and reproducible audio bitstream. 0 = unmuted, 1 = muted.</entry> </row> <row><entry></entry></row> <row id="v4l2-mpeg-video-encoding"> diff --git a/Documentation/DocBook/v4l/dev-capture.xml b/Documentation/DocBook/v4l/dev-capture.xml index 32807e43f170..2237c661f26a 100644 --- a/Documentation/DocBook/v4l/dev-capture.xml +++ b/Documentation/DocBook/v4l/dev-capture.xml @@ -18,7 +18,8 @@ files are used for video output devices.</para> <title>Querying Capabilities</title> <para>Devices supporting the video capture interface set the -<constant>V4L2_CAP_VIDEO_CAPTURE</constant> flag in the +<constant>V4L2_CAP_VIDEO_CAPTURE</constant> or +<constant>V4L2_CAP_VIDEO_CAPTURE_MPLANE</constant> flag in the <structfield>capabilities</structfield> field of &v4l2-capability; returned by the &VIDIOC-QUERYCAP; ioctl. As secondary device functions they may also support the <link linkend="overlay">video overlay</link> @@ -64,9 +65,11 @@ linkend="crop" />.</para> <para>To query the current image format applications set the <structfield>type</structfield> field of a &v4l2-format; to -<constant>V4L2_BUF_TYPE_VIDEO_CAPTURE</constant> and call the +<constant>V4L2_BUF_TYPE_VIDEO_CAPTURE</constant> or +<constant>V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE</constant> and call the &VIDIOC-G-FMT; ioctl with a pointer to this structure. Drivers fill -the &v4l2-pix-format; <structfield>pix</structfield> member of the +the &v4l2-pix-format; <structfield>pix</structfield> or the +&v4l2-pix-format-mplane; <structfield>pix_mp</structfield> member of the <structfield>fmt</structfield> union.</para> <para>To request different parameters applications set the @@ -84,8 +87,8 @@ adjust the parameters and finally return the actual parameters as without disabling I/O or possibly time consuming hardware preparations.</para> - <para>The contents of &v4l2-pix-format; are discussed in <xref -linkend="pixfmt" />. See also the specification of the + <para>The contents of &v4l2-pix-format; and &v4l2-pix-format-mplane; +are discussed in <xref linkend="pixfmt" />. See also the specification of the <constant>VIDIOC_G_FMT</constant>, <constant>VIDIOC_S_FMT</constant> and <constant>VIDIOC_TRY_FMT</constant> ioctls for details. Video capture devices must implement both the diff --git a/Documentation/DocBook/v4l/dev-output.xml b/Documentation/DocBook/v4l/dev-output.xml index 63c3c20e5a72..919e22c53854 100644 --- a/Documentation/DocBook/v4l/dev-output.xml +++ b/Documentation/DocBook/v4l/dev-output.xml @@ -17,7 +17,8 @@ files are used for video capture devices.</para> <title>Querying Capabilities</title> <para>Devices supporting the video output interface set the -<constant>V4L2_CAP_VIDEO_OUTPUT</constant> flag in the +<constant>V4L2_CAP_VIDEO_OUTPUT</constant> or +<constant>V4L2_CAP_VIDEO_OUTPUT_MPLANE</constant> flag in the <structfield>capabilities</structfield> field of &v4l2-capability; returned by the &VIDIOC-QUERYCAP; ioctl. As secondary device functions they may also support the <link linkend="raw-vbi">raw VBI @@ -60,9 +61,11 @@ linkend="crop" />.</para> <para>To query the current image format applications set the <structfield>type</structfield> field of a &v4l2-format; to -<constant>V4L2_BUF_TYPE_VIDEO_OUTPUT</constant> and call the +<constant>V4L2_BUF_TYPE_VIDEO_OUTPUT</constant> or +<constant>V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE</constant> and call the &VIDIOC-G-FMT; ioctl with a pointer to this structure. Drivers fill -the &v4l2-pix-format; <structfield>pix</structfield> member of the +the &v4l2-pix-format; <structfield>pix</structfield> or the +&v4l2-pix-format-mplane; <structfield>pix_mp</structfield> member of the <structfield>fmt</structfield> union.</para> <para>To request different parameters applications set the @@ -80,8 +83,8 @@ adjust the parameters and finally return the actual parameters as without disabling I/O or possibly time consuming hardware preparations.</para> - <para>The contents of &v4l2-pix-format; are discussed in <xref -linkend="pixfmt" />. See also the specification of the + <para>The contents of &v4l2-pix-format; and &v4l2-pix-format-mplane; +are discussed in <xref linkend="pixfmt" />. See also the specification of the <constant>VIDIOC_G_FMT</constant>, <constant>VIDIOC_S_FMT</constant> and <constant>VIDIOC_TRY_FMT</constant> ioctls for details. Video output devices must implement both the diff --git a/Documentation/DocBook/v4l/dev-subdev.xml b/Documentation/DocBook/v4l/dev-subdev.xml new file mode 100644 index 000000000000..05c8fefcbcbe --- /dev/null +++ b/Documentation/DocBook/v4l/dev-subdev.xml @@ -0,0 +1,313 @@ + <title>Sub-device Interface</title> + + <note> + <title>Experimental</title> + <para>This is an <link linkend="experimental">experimental</link> + interface and may change in the future.</para> + </note> + + <para>The complex nature of V4L2 devices, where hardware is often made of + several integrated circuits that need to interact with each other in a + controlled way, leads to complex V4L2 drivers. The drivers usually reflect + the hardware model in software, and model the different hardware components + as software blocks called sub-devices.</para> + + <para>V4L2 sub-devices are usually kernel-only objects. If the V4L2 driver + implements the media device API, they will automatically inherit from media + entities. Applications will be able to enumerate the sub-devices and discover + the hardware topology using the media entities, pads and links enumeration + API.</para> + + <para>In addition to make sub-devices discoverable, drivers can also choose + to make them directly configurable by applications. When both the sub-device + driver and the V4L2 device driver support this, sub-devices will feature a + character device node on which ioctls can be called to + <itemizedlist> + <listitem><para>query, read and write sub-devices controls</para></listitem> + <listitem><para>subscribe and unsubscribe to events and retrieve them</para></listitem> + <listitem><para>negotiate image formats on individual pads</para></listitem> + </itemizedlist> + </para> + + <para>Sub-device character device nodes, conventionally named + <filename>/dev/v4l-subdev*</filename>, use major number 81.</para> + + <section> + <title>Controls</title> + <para>Most V4L2 controls are implemented by sub-device hardware. Drivers + usually merge all controls and expose them through video device nodes. + Applications can control all sub-devices through a single interface.</para> + + <para>Complex devices sometimes implement the same control in different + pieces of hardware. This situation is common in embedded platforms, where + both sensors and image processing hardware implement identical functions, + such as contrast adjustment, white balance or faulty pixels correction. As + the V4L2 controls API doesn't support several identical controls in a single + device, all but one of the identical controls are hidden.</para> + + <para>Applications can access those hidden controls through the sub-device + node with the V4L2 control API described in <xref linkend="control" />. The + ioctls behave identically as when issued on V4L2 device nodes, with the + exception that they deal only with controls implemented in the sub-device. + </para> + + <para>Depending on the driver, those controls might also be exposed through + one (or several) V4L2 device nodes.</para> + </section> + + <section> + <title>Events</title> + <para>V4L2 sub-devices can notify applications of events as described in + <xref linkend="event" />. The API behaves identically as when used on V4L2 + device nodes, with the exception that it only deals with events generated by + the sub-device. Depending on the driver, those events might also be reported + on one (or several) V4L2 device nodes.</para> + </section> + + <section id="pad-level-formats"> + <title>Pad-level Formats</title> + + <warning><para>Pad-level formats are only applicable to very complex device that + need to expose low-level format configuration to user space. Generic V4L2 + applications do <emphasis>not</emphasis> need to use the API described in + this section.</para></warning> + + <note><para>For the purpose of this section, the term + <wordasword>format</wordasword> means the combination of media bus data + format, frame width and frame height.</para></note> + + <para>Image formats are typically negotiated on video capture and output + devices using the <link linkend="crop">cropping and scaling</link> ioctls. + The driver is responsible for configuring every block in the video pipeline + according to the requested format at the pipeline input and/or + output.</para> + + <para>For complex devices, such as often found in embedded systems, + identical image sizes at the output of a pipeline can be achieved using + different hardware configurations. One such example is shown on + <xref linkend="pipeline-scaling" />, where + image scaling can be performed on both the video sensor and the host image + processing hardware.</para> + + <figure id="pipeline-scaling"> + <title>Image Format Negotiation on Pipelines</title> + <mediaobject> + <imageobject> + <imagedata fileref="pipeline.pdf" format="PS" /> + </imageobject> + <imageobject> + <imagedata fileref="pipeline.png" format="PNG" /> + </imageobject> + <textobject> + <phrase>High quality and high speed pipeline configuration</phrase> + </textobject> + </mediaobject> + </figure> + + <para>The sensor scaler is usually of less quality than the host scaler, but + scaling on the sensor is required to achieve higher frame rates. Depending + on the use case (quality vs. speed), the pipeline must be configured + differently. Applications need to configure the formats at every point in + the pipeline explicitly.</para> + + <para>Drivers that implement the <link linkend="media-controller-intro">media + API</link> can expose pad-level image format configuration to applications. + When they do, applications can use the &VIDIOC-SUBDEV-G-FMT; and + &VIDIOC-SUBDEV-S-FMT; ioctls. to negotiate formats on a per-pad basis.</para> + + <para>Applications are responsible for configuring coherent parameters on + the whole pipeline and making sure that connected pads have compatible + formats. The pipeline is checked for formats mismatch at &VIDIOC-STREAMON; + time, and an &EPIPE; is then returned if the configuration is + invalid.</para> + + <para>Pad-level image format configuration support can be tested by calling + the &VIDIOC-SUBDEV-G-FMT; ioctl on pad 0. If the driver returns an &EINVAL; + pad-level format configuration is not supported by the sub-device.</para> + + <section> + <title>Format Negotiation</title> + + <para>Acceptable formats on pads can (and usually do) depend on a number + of external parameters, such as formats on other pads, active links, or + even controls. Finding a combination of formats on all pads in a video + pipeline, acceptable to both application and driver, can't rely on formats + enumeration only. A format negotiation mechanism is required.</para> + + <para>Central to the format negotiation mechanism are the get/set format + operations. When called with the <structfield>which</structfield> argument + set to <constant>V4L2_SUBDEV_FORMAT_TRY</constant>, the + &VIDIOC-SUBDEV-G-FMT; and &VIDIOC-SUBDEV-S-FMT; ioctls operate on a set of + formats parameters that are not connected to the hardware configuration. + Modifying those 'try' formats leaves the device state untouched (this + applies to both the software state stored in the driver and the hardware + state stored in the device itself).</para> + + <para>While not kept as part of the device state, try formats are stored + in the sub-device file handles. A &VIDIOC-SUBDEV-G-FMT; call will return + the last try format set <emphasis>on the same sub-device file + handle</emphasis>. Several applications querying the same sub-device at + the same time will thus not interact with each other.</para> + + <para>To find out whether a particular format is supported by the device, + applications use the &VIDIOC-SUBDEV-S-FMT; ioctl. Drivers verify and, if + needed, change the requested <structfield>format</structfield> based on + device requirements and return the possibly modified value. Applications + can then choose to try a different format or accept the returned value and + continue.</para> + + <para>Formats returned by the driver during a negotiation iteration are + guaranteed to be supported by the device. In particular, drivers guarantee + that a returned format will not be further changed if passed to an + &VIDIOC-SUBDEV-S-FMT; call as-is (as long as external parameters, such as + formats on other pads or links' configuration are not changed).</para> + + <para>Drivers automatically propagate formats inside sub-devices. When a + try or active format is set on a pad, corresponding formats on other pads + of the same sub-device can be modified by the driver. Drivers are free to + modify formats as required by the device. However, they should comply with + the following rules when possible: + <itemizedlist> + <listitem><para>Formats should be propagated from sink pads to source pads. + Modifying a format on a source pad should not modify the format on any + sink pad.</para></listitem> + <listitem><para>Sub-devices that scale frames using variable scaling factors + should reset the scale factors to default values when sink pads formats + are modified. If the 1:1 scaling ratio is supported, this means that + source pads formats should be reset to the sink pads formats.</para></listitem> + </itemizedlist> + </para> + + <para>Formats are not propagated across links, as that would involve + propagating them from one sub-device file handle to another. Applications + must then take care to configure both ends of every link explicitly with + compatible formats. Identical formats on the two ends of a link are + guaranteed to be compatible. Drivers are free to accept different formats + matching device requirements as being compatible.</para> + + <para><xref linkend="sample-pipeline-config" /> + shows a sample configuration sequence for the pipeline described in + <xref linkend="pipeline-scaling" /> (table + columns list entity names and pad numbers).</para> + + <table pgwide="0" frame="none" id="sample-pipeline-config"> + <title>Sample Pipeline Configuration</title> + <tgroup cols="3"> + <colspec colname="what"/> + <colspec colname="sensor-0" /> + <colspec colname="frontend-0" /> + <colspec colname="frontend-1" /> + <colspec colname="scaler-0" /> + <colspec colname="scaler-1" /> + <thead> + <row> + <entry></entry> + <entry>Sensor/0</entry> + <entry>Frontend/0</entry> + <entry>Frontend/1</entry> + <entry>Scaler/0</entry> + <entry>Scaler/1</entry> + </row> + </thead> + <tbody valign="top"> + <row> + <entry>Initial state</entry> + <entry>2048x1536</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + </row> + <row> + <entry>Configure frontend input</entry> + <entry>2048x1536</entry> + <entry><emphasis>2048x1536</emphasis></entry> + <entry><emphasis>2046x1534</emphasis></entry> + <entry>-</entry> + <entry>-</entry> + </row> + <row> + <entry>Configure scaler input</entry> + <entry>2048x1536</entry> + <entry>2048x1536</entry> + <entry>2046x1534</entry> + <entry><emphasis>2046x1534</emphasis></entry> + <entry><emphasis>2046x1534</emphasis></entry> + </row> + <row> + <entry>Configure scaler output</entry> + <entry>2048x1536</entry> + <entry>2048x1536</entry> + <entry>2046x1534</entry> + <entry>2046x1534</entry> + <entry><emphasis>1280x960</emphasis></entry> + </row> + </tbody> + </tgroup> + </table> + + <para> + <orderedlist> + <listitem><para>Initial state. The sensor output is set to its native 3MP + resolution. Resolutions on the host frontend and scaler input and output + pads are undefined.</para></listitem> + <listitem><para>The application configures the frontend input pad resolution to + 2048x1536. The driver propagates the format to the frontend output pad. + Note that the propagated output format can be different, as in this case, + than the input format, as the hardware might need to crop pixels (for + instance when converting a Bayer filter pattern to RGB or YUV).</para></listitem> + <listitem><para>The application configures the scaler input pad resolution to + 2046x1534 to match the frontend output resolution. The driver propagates + the format to the scaler output pad.</para></listitem> + <listitem><para>The application configures the scaler output pad resolution to + 1280x960.</para></listitem> + </orderedlist> + </para> + + <para>When satisfied with the try results, applications can set the active + formats by setting the <structfield>which</structfield> argument to + <constant>V4L2_SUBDEV_FORMAT_TRY</constant>. Active formats are changed + exactly as try formats by drivers. To avoid modifying the hardware state + during format negotiation, applications should negotiate try formats first + and then modify the active settings using the try formats returned during + the last negotiation iteration. This guarantees that the active format + will be applied as-is by the driver without being modified. + </para> + </section> + + <section> + <title>Cropping and scaling</title> + + <para>Many sub-devices support cropping frames on their input or output + pads (or possible even on both). Cropping is used to select the area of + interest in an image, typically on a video sensor or video decoder. It can + also be used as part of digital zoom implementations to select the area of + the image that will be scaled up.</para> + + <para>Crop settings are defined by a crop rectangle and represented in a + &v4l2-rect; by the coordinates of the top left corner and the rectangle + size. Both the coordinates and sizes are expressed in pixels.</para> + + <para>The crop rectangle is retrieved and set using the + &VIDIOC-SUBDEV-G-CROP; and &VIDIOC-SUBDEV-S-CROP; ioctls. Like for pad + formats, drivers store try and active crop rectangles. The format + negotiation mechanism applies to crop settings as well.</para> + + <para>On input pads, cropping is applied relatively to the current pad + format. The pad format represents the image size as received by the + sub-device from the previous block in the pipeline, and the crop rectangle + represents the sub-image that will be transmitted further inside the + sub-device for processing. The crop rectangle be entirely containted + inside the input image size.</para> + + <para>Input crop rectangle are reset to their default value when the input + image format is modified. Drivers should use the input image size as the + crop rectangle default value, but hardware requirements may prevent this. + </para> + + <para>Cropping behaviour on output pads is not defined.</para> + + </section> + </section> + + &sub-subdev-formats; diff --git a/Documentation/DocBook/v4l/func-mmap.xml b/Documentation/DocBook/v4l/func-mmap.xml index 2e2fc3933aea..786732b64bbd 100644 --- a/Documentation/DocBook/v4l/func-mmap.xml +++ b/Documentation/DocBook/v4l/func-mmap.xml @@ -45,7 +45,10 @@ just specify a <constant>NULL</constant> pointer here.</para> <listitem> <para>Length of the memory area to map. This must be the same value as returned by the driver in the &v4l2-buffer; -<structfield>length</structfield> field.</para> +<structfield>length</structfield> field for the +single-planar API, and the same value as returned by the driver +in the &v4l2-plane; <structfield>length</structfield> field for the +multi-planar API.</para> </listitem> </varlistentry> <varlistentry> @@ -106,7 +109,10 @@ flag.</para> <listitem> <para>Offset of the buffer in device memory. This must be the same value as returned by the driver in the &v4l2-buffer; -<structfield>m</structfield> union <structfield>offset</structfield> field.</para> +<structfield>m</structfield> union <structfield>offset</structfield> field for +the single-planar API, and the same value as returned by the driver +in the &v4l2-plane; <structfield>m</structfield> union +<structfield>mem_offset</structfield> field for the multi-planar API.</para> </listitem> </varlistentry> </variablelist> diff --git a/Documentation/DocBook/v4l/func-munmap.xml b/Documentation/DocBook/v4l/func-munmap.xml index 502ed49323b0..e2c4190f9bb6 100644 --- a/Documentation/DocBook/v4l/func-munmap.xml +++ b/Documentation/DocBook/v4l/func-munmap.xml @@ -37,7 +37,8 @@ <para>Length of the mapped buffer. This must be the same value as given to <function>mmap()</function> and returned by the driver in the &v4l2-buffer; <structfield>length</structfield> -field.</para> +field for the single-planar API and in the &v4l2-plane; +<structfield>length</structfield> field for the multi-planar API.</para> </listitem> </varlistentry> </variablelist> diff --git a/Documentation/DocBook/v4l/io.xml b/Documentation/DocBook/v4l/io.xml index d424886beda0..227e7ac45a06 100644 --- a/Documentation/DocBook/v4l/io.xml +++ b/Documentation/DocBook/v4l/io.xml @@ -121,18 +121,22 @@ mapped.</para> <para>Before applications can access the buffers they must map them into their address space with the &func-mmap; function. The location of the buffers in device memory can be determined with the -&VIDIOC-QUERYBUF; ioctl. The <structfield>m.offset</structfield> and -<structfield>length</structfield> returned in a &v4l2-buffer; are -passed as sixth and second parameter to the -<function>mmap()</function> function. The offset and length values -must not be modified. Remember the buffers are allocated in physical -memory, as opposed to virtual memory which can be swapped out to disk. -Applications should free the buffers as soon as possible with the -&func-munmap; function.</para> +&VIDIOC-QUERYBUF; ioctl. In the single-planar API case, the +<structfield>m.offset</structfield> and <structfield>length</structfield> +returned in a &v4l2-buffer; are passed as sixth and second parameter to the +<function>mmap()</function> function. When using the multi-planar API, +struct &v4l2-buffer; contains an array of &v4l2-plane; structures, each +containing its own <structfield>m.offset</structfield> and +<structfield>length</structfield>. When using the multi-planar API, every +plane of every buffer has to be mapped separately, so the number of +calls to &func-mmap; should be equal to number of buffers times number of +planes in each buffer. The offset and length values must not be modified. +Remember, the buffers are allocated in physical memory, as opposed to virtual +memory, which can be swapped out to disk. Applications should free the buffers +as soon as possible with the &func-munmap; function.</para> <example> - <title>Mapping buffers</title> - + <title>Mapping buffers in the single-planar API</title> <programlisting> &v4l2-requestbuffers; reqbuf; struct { @@ -141,63 +145,145 @@ struct { } *buffers; unsigned int i; -memset (&reqbuf, 0, sizeof (reqbuf)); +memset(&reqbuf, 0, sizeof(reqbuf)); reqbuf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; reqbuf.memory = V4L2_MEMORY_MMAP; reqbuf.count = 20; if (-1 == ioctl (fd, &VIDIOC-REQBUFS;, &reqbuf)) { if (errno == EINVAL) - printf ("Video capturing or mmap-streaming is not supported\n"); + printf("Video capturing or mmap-streaming is not supported\n"); else - perror ("VIDIOC_REQBUFS"); + perror("VIDIOC_REQBUFS"); - exit (EXIT_FAILURE); + exit(EXIT_FAILURE); } /* We want at least five buffers. */ if (reqbuf.count < 5) { /* You may need to free the buffers here. */ - printf ("Not enough buffer memory\n"); - exit (EXIT_FAILURE); + printf("Not enough buffer memory\n"); + exit(EXIT_FAILURE); } -buffers = calloc (reqbuf.count, sizeof (*buffers)); -assert (buffers != NULL); +buffers = calloc(reqbuf.count, sizeof(*buffers)); +assert(buffers != NULL); for (i = 0; i < reqbuf.count; i++) { &v4l2-buffer; buffer; - memset (&buffer, 0, sizeof (buffer)); + memset(&buffer, 0, sizeof(buffer)); buffer.type = reqbuf.type; buffer.memory = V4L2_MEMORY_MMAP; buffer.index = i; if (-1 == ioctl (fd, &VIDIOC-QUERYBUF;, &buffer)) { - perror ("VIDIOC_QUERYBUF"); - exit (EXIT_FAILURE); + perror("VIDIOC_QUERYBUF"); + exit(EXIT_FAILURE); } buffers[i].length = buffer.length; /* remember for munmap() */ - buffers[i].start = mmap (NULL, buffer.length, - PROT_READ | PROT_WRITE, /* recommended */ - MAP_SHARED, /* recommended */ - fd, buffer.m.offset); + buffers[i].start = mmap(NULL, buffer.length, + PROT_READ | PROT_WRITE, /* recommended */ + MAP_SHARED, /* recommended */ + fd, buffer.m.offset); if (MAP_FAILED == buffers[i].start) { /* If you do not exit here you should unmap() and free() the buffers mapped so far. */ - perror ("mmap"); - exit (EXIT_FAILURE); + perror("mmap"); + exit(EXIT_FAILURE); + } +} + +/* Cleanup. */ + +for (i = 0; i < reqbuf.count; i++) + munmap(buffers[i].start, buffers[i].length); + </programlisting> + </example> + + <example> + <title>Mapping buffers in the multi-planar API</title> + <programlisting> +&v4l2-requestbuffers; reqbuf; +/* Our current format uses 3 planes per buffer */ +#define FMT_NUM_PLANES = 3; + +struct { + void *start[FMT_NUM_PLANES]; + size_t length[FMT_NUM_PLANES]; +} *buffers; +unsigned int i, j; + +memset(&reqbuf, 0, sizeof(reqbuf)); +reqbuf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; +reqbuf.memory = V4L2_MEMORY_MMAP; +reqbuf.count = 20; + +if (ioctl(fd, &VIDIOC-REQBUFS;, &reqbuf) < 0) { + if (errno == EINVAL) + printf("Video capturing or mmap-streaming is not supported\n"); + else + perror("VIDIOC_REQBUFS"); + + exit(EXIT_FAILURE); +} + +/* We want at least five buffers. */ + +if (reqbuf.count < 5) { + /* You may need to free the buffers here. */ + printf("Not enough buffer memory\n"); + exit(EXIT_FAILURE); +} + +buffers = calloc(reqbuf.count, sizeof(*buffers)); +assert(buffers != NULL); + +for (i = 0; i < reqbuf.count; i++) { + &v4l2-buffer; buffer; + &v4l2-plane; planes[FMT_NUM_PLANES]; + + memset(&buffer, 0, sizeof(buffer)); + buffer.type = reqbuf.type; + buffer.memory = V4L2_MEMORY_MMAP; + buffer.index = i; + /* length in struct v4l2_buffer in multi-planar API stores the size + * of planes array. */ + buffer.length = FMT_NUM_PLANES; + buffer.m.planes = planes; + + if (ioctl(fd, &VIDIOC-QUERYBUF;, &buffer) < 0) { + perror("VIDIOC_QUERYBUF"); + exit(EXIT_FAILURE); + } + + /* Every plane has to be mapped separately */ + for (j = 0; j < FMT_NUM_PLANES; j++) { + buffers[i].length[j] = buffer.m.planes[j].length; /* remember for munmap() */ + + buffers[i].start[j] = mmap(NULL, buffer.m.planes[j].length, + PROT_READ | PROT_WRITE, /* recommended */ + MAP_SHARED, /* recommended */ + fd, buffer.m.planes[j].m.offset); + + if (MAP_FAILED == buffers[i].start[j]) { + /* If you do not exit here you should unmap() and free() + the buffers and planes mapped so far. */ + perror("mmap"); + exit(EXIT_FAILURE); + } } } /* Cleanup. */ for (i = 0; i < reqbuf.count; i++) - munmap (buffers[i].start, buffers[i].length); + for (j = 0; j < FMT_NUM_PLANES; j++) + munmap(buffers[i].start[j], buffers[i].length[j]); </programlisting> </example> @@ -286,13 +372,13 @@ pointer method (not only memory mapping) is supported must be determined by calling the &VIDIOC-REQBUFS; ioctl.</para> <para>This I/O method combines advantages of the read/write and -memory mapping methods. Buffers are allocated by the application +memory mapping methods. Buffers (planes) are allocated by the application itself, and can reside for example in virtual or shared memory. Only pointers to data are exchanged, these pointers and meta-information -are passed in &v4l2-buffer;. The driver must be switched -into user pointer I/O mode by calling the &VIDIOC-REQBUFS; with the -desired buffer type. No buffers are allocated beforehands, -consequently they are not indexed and cannot be queried like mapped +are passed in &v4l2-buffer; (or in &v4l2-plane; in the multi-planar API case). +The driver must be switched into user pointer I/O mode by calling the +&VIDIOC-REQBUFS; with the desired buffer type. No buffers (planes) are allocated +beforehand, consequently they are not indexed and cannot be queried like mapped buffers with the <constant>VIDIOC_QUERYBUF</constant> ioctl.</para> <example> @@ -316,7 +402,7 @@ if (ioctl (fd, &VIDIOC-REQBUFS;, &reqbuf) == -1) { </programlisting> </example> - <para>Buffer addresses and sizes are passed on the fly with the + <para>Buffer (plane) addresses and sizes are passed on the fly with the &VIDIOC-QBUF; ioctl. Although buffers are commonly cycled, applications can pass different addresses and sizes at each <constant>VIDIOC_QBUF</constant> call. If required by the hardware the @@ -396,11 +482,18 @@ rest should be evident.</para> <title>Buffers</title> <para>A buffer contains data exchanged by application and -driver using one of the Streaming I/O methods. Only pointers to -buffers are exchanged, the data itself is not copied. These pointers, -together with meta-information like timestamps or field parity, are -stored in a struct <structname>v4l2_buffer</structname>, argument to -the &VIDIOC-QUERYBUF;, &VIDIOC-QBUF; and &VIDIOC-DQBUF; ioctl.</para> +driver using one of the Streaming I/O methods. In the multi-planar API, the +data is held in planes, while the buffer structure acts as a container +for the planes. Only pointers to buffers (planes) are exchanged, the data +itself is not copied. These pointers, together with meta-information like +timestamps or field parity, are stored in a struct +<structname>v4l2_buffer</structname>, argument to +the &VIDIOC-QUERYBUF;, &VIDIOC-QBUF; and &VIDIOC-DQBUF; ioctl. +In the multi-planar API, some plane-specific members of struct +<structname>v4l2_buffer</structname>, such as pointers and sizes for each +plane, are stored in struct <structname>v4l2_plane</structname> instead. +In that case, struct <structname>v4l2_buffer</structname> contains an array of +plane structures.</para> <para>Nominally timestamps refer to the first data byte transmitted. In practice however the wide range of hardware covered by the V4L2 API @@ -551,26 +644,40 @@ in accordance with the selected I/O method.</entry> <entry></entry> <entry>__u32</entry> <entry><structfield>offset</structfield></entry> - <entry>When <structfield>memory</structfield> is -<constant>V4L2_MEMORY_MMAP</constant> this is the offset of the buffer -from the start of the device memory. The value is returned by the -driver and apart of serving as parameter to the &func-mmap; function -not useful for applications. See <xref linkend="mmap" /> for details.</entry> + <entry>For the single-planar API and when +<structfield>memory</structfield> is <constant>V4L2_MEMORY_MMAP</constant> this +is the offset of the buffer from the start of the device memory. The value is +returned by the driver and apart of serving as parameter to the &func-mmap; +function not useful for applications. See <xref linkend="mmap" /> for details + </entry> </row> <row> <entry></entry> <entry>unsigned long</entry> <entry><structfield>userptr</structfield></entry> - <entry>When <structfield>memory</structfield> is -<constant>V4L2_MEMORY_USERPTR</constant> this is a pointer to the -buffer (casted to unsigned long type) in virtual memory, set by the -application. See <xref linkend="userp" /> for details.</entry> + <entry>For the single-planar API and when +<structfield>memory</structfield> is <constant>V4L2_MEMORY_USERPTR</constant> +this is a pointer to the buffer (casted to unsigned long type) in virtual +memory, set by the application. See <xref linkend="userp" /> for details. + </entry> + </row> + <row> + <entry></entry> + <entry>struct v4l2_plane</entry> + <entry><structfield>*planes</structfield></entry> + <entry>When using the multi-planar API, contains a userspace pointer + to an array of &v4l2-plane;. The size of the array should be put + in the <structfield>length</structfield> field of this + <structname>v4l2_buffer</structname> structure.</entry> </row> <row> <entry>__u32</entry> <entry><structfield>length</structfield></entry> <entry></entry> - <entry>Size of the buffer (not the payload) in bytes.</entry> + <entry>Size of the buffer (not the payload) in bytes for the + single-planar API. For the multi-planar API should contain the + number of elements in the <structfield>planes</structfield> array. + </entry> </row> <row> <entry>__u32</entry> @@ -596,6 +703,66 @@ should set this to 0.</entry> </tgroup> </table> + <table frame="none" pgwide="1" id="v4l2-plane"> + <title>struct <structname>v4l2_plane</structname></title> + <tgroup cols="4"> + &cs-ustr; + <tbody valign="top"> + <row> + <entry>__u32</entry> + <entry><structfield>bytesused</structfield></entry> + <entry></entry> + <entry>The number of bytes occupied by data in the plane + (its payload).</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>length</structfield></entry> + <entry></entry> + <entry>Size in bytes of the plane (not its payload).</entry> + </row> + <row> + <entry>union</entry> + <entry><structfield>m</structfield></entry> + <entry></entry> + <entry></entry> + </row> + <row> + <entry></entry> + <entry>__u32</entry> + <entry><structfield>mem_offset</structfield></entry> + <entry>When the memory type in the containing &v4l2-buffer; is + <constant>V4L2_MEMORY_MMAP</constant>, this is the value that + should be passed to &func-mmap;, similar to the + <structfield>offset</structfield> field in &v4l2-buffer;.</entry> + </row> + <row> + <entry></entry> + <entry>__unsigned long</entry> + <entry><structfield>userptr</structfield></entry> + <entry>When the memory type in the containing &v4l2-buffer; is + <constant>V4L2_MEMORY_USERPTR</constant>, this is a userspace + pointer to the memory allocated for this plane by an application. + </entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>data_offset</structfield></entry> + <entry></entry> + <entry>Offset in bytes to video data in the plane, if applicable. + </entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>reserved[11]</structfield></entry> + <entry></entry> + <entry>Reserved for future use. Should be zeroed by an + application.</entry> + </row> + </tbody> + </tgroup> + </table> + <table frame="none" pgwide="1" id="v4l2-buf-type"> <title>enum v4l2_buf_type</title> <tgroup cols="3"> @@ -604,13 +771,27 @@ should set this to 0.</entry> <row> <entry><constant>V4L2_BUF_TYPE_VIDEO_CAPTURE</constant></entry> <entry>1</entry> - <entry>Buffer of a video capture stream, see <xref + <entry>Buffer of a single-planar video capture stream, see <xref + linkend="capture" />.</entry> + </row> + <row> + <entry><constant>V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE</constant> + </entry> + <entry>9</entry> + <entry>Buffer of a multi-planar video capture stream, see <xref linkend="capture" />.</entry> </row> <row> <entry><constant>V4L2_BUF_TYPE_VIDEO_OUTPUT</constant></entry> <entry>2</entry> - <entry>Buffer of a video output stream, see <xref + <entry>Buffer of a single-planar video output stream, see <xref + linkend="output" />.</entry> + </row> + <row> + <entry><constant>V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE</constant> + </entry> + <entry>10</entry> + <entry>Buffer of a multi-planar video output stream, see <xref linkend="output" />.</entry> </row> <row> diff --git a/Documentation/DocBook/v4l/libv4l.xml b/Documentation/DocBook/v4l/libv4l.xml index c14fc3db2a81..3cb10ec51929 100644 --- a/Documentation/DocBook/v4l/libv4l.xml +++ b/Documentation/DocBook/v4l/libv4l.xml @@ -140,7 +140,7 @@ and is not locked sets the cid to the scaled value. <para>int v4l2_get_control(int fd, int cid) - This function returns a value of 0 - 65535, scaled to from the actual range of the given v4l control id. when the cid does not exist, could not be -accessed for some reason, or some error occured 0 is returned. +accessed for some reason, or some error occurred 0 is returned. </para></listitem> </itemizedlist> </section> diff --git a/Documentation/DocBook/v4l/lirc_device_interface.xml b/Documentation/DocBook/v4l/lirc_device_interface.xml index 68134c0ab4d1..0e0453f39e73 100644 --- a/Documentation/DocBook/v4l/lirc_device_interface.xml +++ b/Documentation/DocBook/v4l/lirc_device_interface.xml @@ -45,7 +45,7 @@ describing an IR signal are read from the chardev.</para> <para>The data written to the chardev is a pulse/space sequence of integer values. Pulses and spaces are only marked implicitly by their position. The data must start and end with a pulse, therefore, the data must always include -an unevent number of samples. The write function must block until the data has +an uneven number of samples. The write function must block until the data has been transmitted by the hardware.</para> </section> diff --git a/Documentation/DocBook/v4l/media-controller.xml b/Documentation/DocBook/v4l/media-controller.xml new file mode 100644 index 000000000000..2dc25e1d4089 --- /dev/null +++ b/Documentation/DocBook/v4l/media-controller.xml @@ -0,0 +1,89 @@ +<partinfo> + <authorgroup> + <author> + <firstname>Laurent</firstname> + <surname>Pinchart</surname> + <affiliation><address><email>laurent.pinchart@ideasonboard.com</email></address></affiliation> + <contrib>Initial version.</contrib> + </author> + </authorgroup> + <copyright> + <year>2010</year> + <holder>Laurent Pinchart</holder> + </copyright> + + <revhistory> + <!-- Put document revisions here, newest first. --> + <revision> + <revnumber>1.0.0</revnumber> + <date>2010-11-10</date> + <authorinitials>lp</authorinitials> + <revremark>Initial revision</revremark> + </revision> + </revhistory> +</partinfo> + +<title>Media Controller API</title> + +<chapter id="media_controller"> + <title>Media Controller</title> + + <section id="media-controller-intro"> + <title>Introduction</title> + <para>Media devices increasingly handle multiple related functions. Many USB + cameras include microphones, video capture hardware can also output video, + or SoC camera interfaces also perform memory-to-memory operations similar to + video codecs.</para> + <para>Independent functions, even when implemented in the same hardware, can + be modelled as separate devices. A USB camera with a microphone will be + presented to userspace applications as V4L2 and ALSA capture devices. The + devices' relationships (when using a webcam, end-users shouldn't have to + manually select the associated USB microphone), while not made available + directly to applications by the drivers, can usually be retrieved from + sysfs.</para> + <para>With more and more advanced SoC devices being introduced, the current + approach will not scale. Device topologies are getting increasingly complex + and can't always be represented by a tree structure. Hardware blocks are + shared between different functions, creating dependencies between seemingly + unrelated devices.</para> + <para>Kernel abstraction APIs such as V4L2 and ALSA provide means for + applications to access hardware parameters. As newer hardware expose an + increasingly high number of those parameters, drivers need to guess what + applications really require based on limited information, thereby + implementing policies that belong to userspace.</para> + <para>The media controller API aims at solving those problems.</para> + </section> + + <section id="media-controller-model"> + <title>Media device model</title> + <para>Discovering a device internal topology, and configuring it at runtime, + is one of the goals of the media controller API. To achieve this, hardware + devices are modelled as an oriented graph of building blocks called entities + connected through pads.</para> + <para>An entity is a basic media hardware or software building block. It can + correspond to a large variety of logical blocks such as physical hardware + devices (CMOS sensor for instance), logical hardware devices (a building + block in a System-on-Chip image processing pipeline), DMA channels or + physical connectors.</para> + <para>A pad is a connection endpoint through which an entity can interact + with other entities. Data (not restricted to video) produced by an entity + flows from the entity's output to one or more entity inputs. Pads should not + be confused with physical pins at chip boundaries.</para> + <para>A link is a point-to-point oriented connection between two pads, + either on the same entity or on different entities. Data flows from a source + pad to a sink pad.</para> + </section> +</chapter> + +<appendix id="media-user-func"> + <title>Function Reference</title> + <!-- Keep this alphabetically sorted. --> + &sub-media-open; + &sub-media-close; + &sub-media-ioctl; + <!-- All ioctls go here. --> + &sub-media-ioc-device-info; + &sub-media-ioc-enum-entities; + &sub-media-ioc-enum-links; + &sub-media-ioc-setup-link; +</appendix> diff --git a/Documentation/DocBook/v4l/media-func-close.xml b/Documentation/DocBook/v4l/media-func-close.xml new file mode 100644 index 000000000000..be149c802aeb --- /dev/null +++ b/Documentation/DocBook/v4l/media-func-close.xml @@ -0,0 +1,59 @@ +<refentry id="media-func-close"> + <refmeta> + <refentrytitle>media close()</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>media-close</refname> + <refpurpose>Close a media device</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcsynopsisinfo>#include <unistd.h></funcsynopsisinfo> + <funcprototype> + <funcdef>int <function>close</function></funcdef> + <paramdef>int <parameter>fd</parameter></paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Arguments</title> + + <variablelist> + <varlistentry> + <term><parameter>fd</parameter></term> + <listitem> + <para>&fd;</para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + + <refsect1> + <title>Description</title> + + <para>Closes the media device. Resources associated with the file descriptor + are freed. The device configuration remain unchanged.</para> + </refsect1> + + <refsect1> + <title>Return Value</title> + + <para><function>close</function> returns 0 on success. On error, -1 is + returned, and <varname>errno</varname> is set appropriately. Possible error + codes are:</para> + + <variablelist> + <varlistentry> + <term><errorcode>EBADF</errorcode></term> + <listitem> + <para><parameter>fd</parameter> is not a valid open file descriptor. + </para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> +</refentry> diff --git a/Documentation/DocBook/v4l/media-func-ioctl.xml b/Documentation/DocBook/v4l/media-func-ioctl.xml new file mode 100644 index 000000000000..bda8604de15c --- /dev/null +++ b/Documentation/DocBook/v4l/media-func-ioctl.xml @@ -0,0 +1,116 @@ +<refentry id="media-func-ioctl"> + <refmeta> + <refentrytitle>media ioctl()</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>media-ioctl</refname> + <refpurpose>Control a media device</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcsynopsisinfo>#include <sys/ioctl.h></funcsynopsisinfo> + <funcprototype> + <funcdef>int <function>ioctl</function></funcdef> + <paramdef>int <parameter>fd</parameter></paramdef> + <paramdef>int <parameter>request</parameter></paramdef> + <paramdef>void *<parameter>argp</parameter></paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Arguments</title> + + <variablelist> + <varlistentry> + <term><parameter>fd</parameter></term> + <listitem> + <para>&fd;</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>request</parameter></term> + <listitem> + <para>Media ioctl request code as defined in the media.h header file, + for example MEDIA_IOC_SETUP_LINK.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>argp</parameter></term> + <listitem> + <para>Pointer to a request-specific structure.</para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + + <refsect1> + <title>Description</title> + <para>The <function>ioctl()</function> function manipulates media device + parameters. The argument <parameter>fd</parameter> must be an open file + descriptor.</para> + <para>The ioctl <parameter>request</parameter> code specifies the media + function to be called. It has encoded in it whether the argument is an + input, output or read/write parameter, and the size of the argument + <parameter>argp</parameter> in bytes.</para> + <para>Macros and structures definitions specifying media ioctl requests and + their parameters are located in the media.h header file. All media ioctl + requests, their respective function and parameters are specified in + <xref linkend="media-user-func" />.</para> + </refsect1> + + <refsect1> + <title>Return Value</title> + + <para><function>ioctl()</function> returns <returnvalue>0</returnvalue> on + success. On failure, <returnvalue>-1</returnvalue> is returned, and the + <varname>errno</varname> variable is set appropriately. Generic error codes + are listed below, and request-specific error codes are listed in the + individual requests descriptions.</para> + <para>When an ioctl that takes an output or read/write parameter fails, + the parameter remains unmodified.</para> + + <variablelist> + <varlistentry> + <term><errorcode>EBADF</errorcode></term> + <listitem> + <para><parameter>fd</parameter> is not a valid open file descriptor. + </para> + </listitem> + </varlistentry> + <varlistentry> + <term><errorcode>EFAULT</errorcode></term> + <listitem> + <para><parameter>argp</parameter> references an inaccessible memory + area.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><errorcode>EINVAL</errorcode></term> + <listitem> + <para>The <parameter>request</parameter> or the data pointed to by + <parameter>argp</parameter> is not valid. This is a very common error + code, see the individual ioctl requests listed in + <xref linkend="media-user-func" /> for actual causes.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><errorcode>ENOMEM</errorcode></term> + <listitem> + <para>Insufficient kernel memory was available to complete the + request.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><errorcode>ENOTTY</errorcode></term> + <listitem> + <para><parameter>fd</parameter> is not associated with a character + special device.</para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> +</refentry> diff --git a/Documentation/DocBook/v4l/media-func-open.xml b/Documentation/DocBook/v4l/media-func-open.xml new file mode 100644 index 000000000000..f7df034dc9ed --- /dev/null +++ b/Documentation/DocBook/v4l/media-func-open.xml @@ -0,0 +1,94 @@ +<refentry id="media-func-open"> + <refmeta> + <refentrytitle>media open()</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>media-open</refname> + <refpurpose>Open a media device</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcsynopsisinfo>#include <fcntl.h></funcsynopsisinfo> + <funcprototype> + <funcdef>int <function>open</function></funcdef> + <paramdef>const char *<parameter>device_name</parameter></paramdef> + <paramdef>int <parameter>flags</parameter></paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Arguments</title> + + <variablelist> + <varlistentry> + <term><parameter>device_name</parameter></term> + <listitem> + <para>Device to be opened.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>flags</parameter></term> + <listitem> + <para>Open flags. Access mode must be either <constant>O_RDONLY</constant> + or <constant>O_RDWR</constant>. Other flags have no effect.</para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + <refsect1> + <title>Description</title> + <para>To open a media device applications call <function>open()</function> + with the desired device name. The function has no side effects; the device + configuration remain unchanged.</para> + <para>When the device is opened in read-only mode, attemps to modify its + configuration will result in an error, and <varname>errno</varname> will be + set to <errorcode>EBADF</errorcode>.</para> + </refsect1> + <refsect1> + <title>Return Value</title> + + <para><function>open</function> returns the new file descriptor on success. + On error, -1 is returned, and <varname>errno</varname> is set appropriately. + Possible error codes are:</para> + + <variablelist> + <varlistentry> + <term><errorcode>EACCES</errorcode></term> + <listitem> + <para>The requested access to the file is not allowed.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><errorcode>EMFILE</errorcode></term> + <listitem> + <para>The process already has the maximum number of files open. + </para> + </listitem> + </varlistentry> + <varlistentry> + <term><errorcode>ENFILE</errorcode></term> + <listitem> + <para>The system limit on the total number of open files has been + reached.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><errorcode>ENOMEM</errorcode></term> + <listitem> + <para>Insufficient kernel memory was available.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><errorcode>ENXIO</errorcode></term> + <listitem> + <para>No device corresponding to this device special file exists. + </para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> +</refentry> diff --git a/Documentation/DocBook/v4l/media-ioc-device-info.xml b/Documentation/DocBook/v4l/media-ioc-device-info.xml new file mode 100644 index 000000000000..1f3237351bba --- /dev/null +++ b/Documentation/DocBook/v4l/media-ioc-device-info.xml @@ -0,0 +1,133 @@ +<refentry id="media-ioc-device-info"> + <refmeta> + <refentrytitle>ioctl MEDIA_IOC_DEVICE_INFO</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>MEDIA_IOC_DEVICE_INFO</refname> + <refpurpose>Query device information</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcprototype> + <funcdef>int <function>ioctl</function></funcdef> + <paramdef>int <parameter>fd</parameter></paramdef> + <paramdef>int <parameter>request</parameter></paramdef> + <paramdef>struct media_device_info *<parameter>argp</parameter></paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Arguments</title> + + <variablelist> + <varlistentry> + <term><parameter>fd</parameter></term> + <listitem> + <para>File descriptor returned by + <link linkend='media-func-open'><function>open()</function></link>.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>request</parameter></term> + <listitem> + <para>MEDIA_IOC_DEVICE_INFO</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>argp</parameter></term> + <listitem> + <para></para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + + <refsect1> + <title>Description</title> + + <para>All media devices must support the <constant>MEDIA_IOC_DEVICE_INFO</constant> + ioctl. To query device information, applications call the ioctl with a + pointer to a &media-device-info;. The driver fills the structure and returns + the information to the application. + The ioctl never fails.</para> + + <table pgwide="1" frame="none" id="media-device-info"> + <title>struct <structname>media_device_info</structname></title> + <tgroup cols="3"> + &cs-str; + <tbody valign="top"> + <row> + <entry>char</entry> + <entry><structfield>driver</structfield>[16]</entry> + <entry><para>Name of the driver implementing the media API as a + NUL-terminated ASCII string. The driver version is stored in the + <structfield>driver_version</structfield> field.</para> + <para>Driver specific applications can use this information to + verify the driver identity. It is also useful to work around + known bugs, or to identify drivers in error reports.</para></entry> + </row> + <row> + <entry>char</entry> + <entry><structfield>model</structfield>[32]</entry> + <entry>Device model name as a NUL-terminated UTF-8 string. The + device version is stored in the <structfield>device_version</structfield> + field and is not be appended to the model name.</entry> + </row> + <row> + <entry>char</entry> + <entry><structfield>serial</structfield>[40]</entry> + <entry>Serial number as a NUL-terminated ASCII string.</entry> + </row> + <row> + <entry>char</entry> + <entry><structfield>bus_info</structfield>[32]</entry> + <entry>Location of the device in the system as a NUL-terminated + ASCII string. This includes the bus type name (PCI, USB, ...) and a + bus-specific identifier.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>media_version</structfield></entry> + <entry>Media API version, formatted with the + <constant>KERNEL_VERSION()</constant> macro.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>hw_revision</structfield></entry> + <entry>Hardware device revision in a driver-specific format.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>media_version</structfield></entry> + <entry>Media device driver version, formatted with the + <constant>KERNEL_VERSION()</constant> macro. Together with the + <structfield>driver</structfield> field this identifies a particular + driver.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>reserved</structfield>[31]</entry> + <entry>Reserved for future extensions. Drivers and applications must + set this array to zero.</entry> + </row> + </tbody> + </tgroup> + </table> + <para>The <structfield>serial</structfield> and <structfield>bus_info</structfield> + fields can be used to distinguish between multiple instances of otherwise + identical hardware. The serial number takes precedence when provided and can + be assumed to be unique. If the serial number is an empty string, the + <structfield>bus_info</structfield> field can be used instead. The + <structfield>bus_info</structfield> field is guaranteed to be unique, but + can vary across reboots or device unplug/replug.</para> + </refsect1> + + <refsect1> + <title>Return value</title> + <para>This function doesn't return specific error codes.</para> + </refsect1> +</refentry> diff --git a/Documentation/DocBook/v4l/media-ioc-enum-entities.xml b/Documentation/DocBook/v4l/media-ioc-enum-entities.xml new file mode 100644 index 000000000000..576b68b33f2c --- /dev/null +++ b/Documentation/DocBook/v4l/media-ioc-enum-entities.xml @@ -0,0 +1,308 @@ +<refentry id="media-ioc-enum-entities"> + <refmeta> + <refentrytitle>ioctl MEDIA_IOC_ENUM_ENTITIES</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>MEDIA_IOC_ENUM_ENTITIES</refname> + <refpurpose>Enumerate entities and their properties</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcprototype> + <funcdef>int <function>ioctl</function></funcdef> + <paramdef>int <parameter>fd</parameter></paramdef> + <paramdef>int <parameter>request</parameter></paramdef> + <paramdef>struct media_entity_desc *<parameter>argp</parameter></paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Arguments</title> + + <variablelist> + <varlistentry> + <term><parameter>fd</parameter></term> + <listitem> + <para>File descriptor returned by + <link linkend='media-func-open'><function>open()</function></link>.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>request</parameter></term> + <listitem> + <para>MEDIA_IOC_ENUM_ENTITIES</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>argp</parameter></term> + <listitem> + <para></para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + + <refsect1> + <title>Description</title> + <para>To query the attributes of an entity, applications set the id field + of a &media-entity-desc; structure and call the MEDIA_IOC_ENUM_ENTITIES + ioctl with a pointer to this structure. The driver fills the rest of the + structure or returns an &EINVAL; when the id is invalid.</para> + <para>Entities can be enumerated by or'ing the id with the + <constant>MEDIA_ENT_ID_FLAG_NEXT</constant> flag. The driver will return + information about the entity with the smallest id strictly larger than the + requested one ('next entity'), or the &EINVAL; if there is none.</para> + <para>Entity IDs can be non-contiguous. Applications must + <emphasis>not</emphasis> try to enumerate entities by calling + MEDIA_IOC_ENUM_ENTITIES with increasing id's until they get an error.</para> + <para>Two or more entities that share a common non-zero + <structfield>group_id</structfield> value are considered as logically + grouped. Groups are used to report + <itemizedlist> + <listitem><para>ALSA, VBI and video nodes that carry the same media + stream</para></listitem> + <listitem><para>lens and flash controllers associated with a sensor</para></listitem> + </itemizedlist> + </para> + + <table pgwide="1" frame="none" id="media-entity-desc"> + <title>struct <structname>media_entity_desc</structname></title> + <tgroup cols="5"> + <colspec colname="c1" /> + <colspec colname="c2" /> + <colspec colname="c3" /> + <colspec colname="c4" /> + <colspec colname="c5" /> + <tbody valign="top"> + <row> + <entry>__u32</entry> + <entry><structfield>id</structfield></entry> + <entry></entry> + <entry></entry> + <entry>Entity id, set by the application. When the id is or'ed with + <constant>MEDIA_ENT_ID_FLAG_NEXT</constant>, the driver clears the + flag and returns the first entity with a larger id.</entry> + </row> + <row> + <entry>char</entry> + <entry><structfield>name</structfield>[32]</entry> + <entry></entry> + <entry></entry> + <entry>Entity name as an UTF-8 NULL-terminated string.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>type</structfield></entry> + <entry></entry> + <entry></entry> + <entry>Entity type, see <xref linkend="media-entity-type" /> for details.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>revision</structfield></entry> + <entry></entry> + <entry></entry> + <entry>Entity revision in a driver/hardware specific format.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>flags</structfield></entry> + <entry></entry> + <entry></entry> + <entry>Entity flags, see <xref linkend="media-entity-flag" /> for details.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>group_id</structfield></entry> + <entry></entry> + <entry></entry> + <entry>Entity group ID</entry> + </row> + <row> + <entry>__u16</entry> + <entry><structfield>pads</structfield></entry> + <entry></entry> + <entry></entry> + <entry>Number of pads</entry> + </row> + <row> + <entry>__u16</entry> + <entry><structfield>links</structfield></entry> + <entry></entry> + <entry></entry> + <entry>Total number of outbound links. Inbound links are not counted + in this field.</entry> + </row> + <row> + <entry>union</entry> + </row> + <row> + <entry></entry> + <entry>struct</entry> + <entry><structfield>v4l</structfield></entry> + <entry></entry> + <entry>Valid for V4L sub-devices and nodes only.</entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry>__u32</entry> + <entry><structfield>major</structfield></entry> + <entry>V4L device node major number. For V4L sub-devices with no + device node, set by the driver to 0.</entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry>__u32</entry> + <entry><structfield>minor</structfield></entry> + <entry>V4L device node minor number. For V4L sub-devices with no + device node, set by the driver to 0.</entry> + </row> + <row> + <entry></entry> + <entry>struct</entry> + <entry><structfield>fb</structfield></entry> + <entry></entry> + <entry>Valid for frame buffer nodes only.</entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry>__u32</entry> + <entry><structfield>major</structfield></entry> + <entry>Frame buffer device node major number.</entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry>__u32</entry> + <entry><structfield>minor</structfield></entry> + <entry>Frame buffer device node minor number.</entry> + </row> + <row> + <entry></entry> + <entry>struct</entry> + <entry><structfield>alsa</structfield></entry> + <entry></entry> + <entry>Valid for ALSA devices only.</entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry>__u32</entry> + <entry><structfield>card</structfield></entry> + <entry>ALSA card number</entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry>__u32</entry> + <entry><structfield>device</structfield></entry> + <entry>ALSA device number</entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry>__u32</entry> + <entry><structfield>subdevice</structfield></entry> + <entry>ALSA sub-device number</entry> + </row> + <row> + <entry></entry> + <entry>int</entry> + <entry><structfield>dvb</structfield></entry> + <entry></entry> + <entry>DVB card number</entry> + </row> + <row> + <entry></entry> + <entry>__u8</entry> + <entry><structfield>raw</structfield>[180]</entry> + <entry></entry> + <entry></entry> + </row> + </tbody> + </tgroup> + </table> + + <table frame="none" pgwide="1" id="media-entity-type"> + <title>Media entity types</title> + <tgroup cols="2"> + <colspec colname="c1"/> + <colspec colname="c2"/> + <tbody valign="top"> + <row> + <entry><constant>MEDIA_ENT_T_DEVNODE</constant></entry> + <entry>Unknown device node</entry> + </row> + <row> + <entry><constant>MEDIA_ENT_T_DEVNODE_V4L</constant></entry> + <entry>V4L video, radio or vbi device node</entry> + </row> + <row> + <entry><constant>MEDIA_ENT_T_DEVNODE_FB</constant></entry> + <entry>Frame buffer device node</entry> + </row> + <row> + <entry><constant>MEDIA_ENT_T_DEVNODE_ALSA</constant></entry> + <entry>ALSA card</entry> + </row> + <row> + <entry><constant>MEDIA_ENT_T_DEVNODE_DVB</constant></entry> + <entry>DVB card</entry> + </row> + <row> + <entry><constant>MEDIA_ENT_T_V4L2_SUBDEV</constant></entry> + <entry>Unknown V4L sub-device</entry> + </row> + <row> + <entry><constant>MEDIA_ENT_T_V4L2_SUBDEV_SENSOR</constant></entry> + <entry>Video sensor</entry> + </row> + <row> + <entry><constant>MEDIA_ENT_T_V4L2_SUBDEV_FLASH</constant></entry> + <entry>Flash controller</entry> + </row> + <row> + <entry><constant>MEDIA_ENT_T_V4L2_SUBDEV_LENS</constant></entry> + <entry>Lens controller</entry> + </row> + </tbody> + </tgroup> + </table> + + <table frame="none" pgwide="1" id="media-entity-flag"> + <title>Media entity flags</title> + <tgroup cols="2"> + <colspec colname="c1"/> + <colspec colname="c2"/> + <tbody valign="top"> + <row> + <entry><constant>MEDIA_ENT_FL_DEFAULT</constant></entry> + <entry>Default entity for its type. Used to discover the default + audio, VBI and video devices, the default camera sensor, ...</entry> + </row> + </tbody> + </tgroup> + </table> + </refsect1> + + <refsect1> + &return-value; + + <variablelist> + <varlistentry> + <term><errorcode>EINVAL</errorcode></term> + <listitem> + <para>The &media-entity-desc; <structfield>id</structfield> references + a non-existing entity.</para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> +</refentry> diff --git a/Documentation/DocBook/v4l/media-ioc-enum-links.xml b/Documentation/DocBook/v4l/media-ioc-enum-links.xml new file mode 100644 index 000000000000..d2fc73ef8d56 --- /dev/null +++ b/Documentation/DocBook/v4l/media-ioc-enum-links.xml @@ -0,0 +1,207 @@ +<refentry id="media-ioc-enum-links"> + <refmeta> + <refentrytitle>ioctl MEDIA_IOC_ENUM_LINKS</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>MEDIA_IOC_ENUM_LINKS</refname> + <refpurpose>Enumerate all pads and links for a given entity</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcprototype> + <funcdef>int <function>ioctl</function></funcdef> + <paramdef>int <parameter>fd</parameter></paramdef> + <paramdef>int <parameter>request</parameter></paramdef> + <paramdef>struct media_links_enum *<parameter>argp</parameter></paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Arguments</title> + + <variablelist> + <varlistentry> + <term><parameter>fd</parameter></term> + <listitem> + <para>File descriptor returned by + <link linkend='media-func-open'><function>open()</function></link>.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>request</parameter></term> + <listitem> + <para>MEDIA_IOC_ENUM_LINKS</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>argp</parameter></term> + <listitem> + <para></para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + + <refsect1> + <title>Description</title> + + <para>To enumerate pads and/or links for a given entity, applications set + the entity field of a &media-links-enum; structure and initialize the + &media-pad-desc; and &media-link-desc; structure arrays pointed by the + <structfield>pads</structfield> and <structfield>links</structfield> fields. + They then call the MEDIA_IOC_ENUM_LINKS ioctl with a pointer to this + structure.</para> + <para>If the <structfield>pads</structfield> field is not NULL, the driver + fills the <structfield>pads</structfield> array with information about the + entity's pads. The array must have enough room to store all the entity's + pads. The number of pads can be retrieved with the &MEDIA-IOC-ENUM-ENTITIES; + ioctl.</para> + <para>If the <structfield>links</structfield> field is not NULL, the driver + fills the <structfield>links</structfield> array with information about the + entity's outbound links. The array must have enough room to store all the + entity's outbound links. The number of outbound links can be retrieved with + the &MEDIA-IOC-ENUM-ENTITIES; ioctl.</para> + <para>Only forward links that originate at one of the entity's source pads + are returned during the enumeration process.</para> + + <table pgwide="1" frame="none" id="media-links-enum"> + <title>struct <structname>media_links_enum</structname></title> + <tgroup cols="3"> + &cs-str; + <tbody valign="top"> + <row> + <entry>__u32</entry> + <entry><structfield>entity</structfield></entry> + <entry>Entity id, set by the application.</entry> + </row> + <row> + <entry>struct &media-pad-desc;</entry> + <entry>*<structfield>pads</structfield></entry> + <entry>Pointer to a pads array allocated by the application. Ignored + if NULL.</entry> + </row> + <row> + <entry>struct &media-link-desc;</entry> + <entry>*<structfield>links</structfield></entry> + <entry>Pointer to a links array allocated by the application. Ignored + if NULL.</entry> + </row> + </tbody> + </tgroup> + </table> + + <table pgwide="1" frame="none" id="media-pad-desc"> + <title>struct <structname>media_pad_desc</structname></title> + <tgroup cols="3"> + &cs-str; + <tbody valign="top"> + <row> + <entry>__u32</entry> + <entry><structfield>entity</structfield></entry> + <entry>ID of the entity this pad belongs to.</entry> + </row> + <row> + <entry>__u16</entry> + <entry><structfield>index</structfield></entry> + <entry>0-based pad index.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>flags</structfield></entry> + <entry>Pad flags, see <xref linkend="media-pad-flag" /> for more details.</entry> + </row> + </tbody> + </tgroup> + </table> + + <table frame="none" pgwide="1" id="media-pad-flag"> + <title>Media pad flags</title> + <tgroup cols="2"> + <colspec colname="c1"/> + <colspec colname="c2"/> + <tbody valign="top"> + <row> + <entry><constant>MEDIA_PAD_FL_SINK</constant></entry> + <entry>Input pad, relative to the entity. Input pads sink data and + are targets of links.</entry> + </row> + <row> + <entry><constant>MEDIA_PAD_FL_SOURCE</constant></entry> + <entry>Output pad, relative to the entity. Output pads source data + and are origins of links.</entry> + </row> + </tbody> + </tgroup> + </table> + + <table pgwide="1" frame="none" id="media-link-desc"> + <title>struct <structname>media_links_desc</structname></title> + <tgroup cols="3"> + &cs-str; + <tbody valign="top"> + <row> + <entry>struct &media-pad-desc;</entry> + <entry><structfield>source</structfield></entry> + <entry>Pad at the origin of this link.</entry> + </row> + <row> + <entry>struct &media-pad-desc;</entry> + <entry><structfield>sink</structfield></entry> + <entry>Pad at the target of this link.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>flags</structfield></entry> + <entry>Link flags, see <xref linkend="media-link-flag" /> for more details.</entry> + </row> + </tbody> + </tgroup> + </table> + + <table frame="none" pgwide="1" id="media-link-flag"> + <title>Media link flags</title> + <tgroup cols="2"> + <colspec colname="c1"/> + <colspec colname="c2"/> + <tbody valign="top"> + <row> + <entry><constant>MEDIA_LNK_FL_ENABLED</constant></entry> + <entry>The link is enabled and can be used to transfer media data. + When two or more links target a sink pad, only one of them can be + enabled at a time.</entry> + </row> + <row> + <entry><constant>MEDIA_LNK_FL_IMMUTABLE</constant></entry> + <entry>The link enabled state can't be modified at runtime. An + immutable link is always enabled.</entry> + </row> + <row> + <entry><constant>MEDIA_LNK_FL_DYNAMIC</constant></entry> + <entry>The link enabled state can be modified during streaming. This + flag is set by drivers and is read-only for applications.</entry> + </row> + </tbody> + </tgroup> + </table> + <para>One and only one of <constant>MEDIA_PAD_FL_SINK</constant> and + <constant>MEDIA_PAD_FL_SOURCE</constant> must be set for every pad.</para> + </refsect1> + + <refsect1> + &return-value; + + <variablelist> + <varlistentry> + <term><errorcode>EINVAL</errorcode></term> + <listitem> + <para>The &media-links-enum; <structfield>id</structfield> references + a non-existing entity.</para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> +</refentry> diff --git a/Documentation/DocBook/v4l/media-ioc-setup-link.xml b/Documentation/DocBook/v4l/media-ioc-setup-link.xml new file mode 100644 index 000000000000..cec97af4dab4 --- /dev/null +++ b/Documentation/DocBook/v4l/media-ioc-setup-link.xml @@ -0,0 +1,93 @@ +<refentry id="media-ioc-setup-link"> + <refmeta> + <refentrytitle>ioctl MEDIA_IOC_SETUP_LINK</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>MEDIA_IOC_SETUP_LINK</refname> + <refpurpose>Modify the properties of a link</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcprototype> + <funcdef>int <function>ioctl</function></funcdef> + <paramdef>int <parameter>fd</parameter></paramdef> + <paramdef>int <parameter>request</parameter></paramdef> + <paramdef>struct media_link_desc *<parameter>argp</parameter></paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Arguments</title> + + <variablelist> + <varlistentry> + <term><parameter>fd</parameter></term> + <listitem> + <para>File descriptor returned by + <link linkend='media-func-open'><function>open()</function></link>.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>request</parameter></term> + <listitem> + <para>MEDIA_IOC_SETUP_LINK</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>argp</parameter></term> + <listitem> + <para></para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + + <refsect1> + <title>Description</title> + + <para>To change link properties applications fill a &media-link-desc; with + link identification information (source and sink pad) and the new requested + link flags. They then call the MEDIA_IOC_SETUP_LINK ioctl with a pointer to + that structure.</para> + <para>The only configurable property is the <constant>ENABLED</constant> + link flag to enable/disable a link. Links marked with the + <constant>IMMUTABLE</constant> link flag can not be enabled or disabled. + </para> + <para>Link configuration has no side effect on other links. If an enabled + link at the sink pad prevents the link from being enabled, the driver + returns with an &EBUSY;.</para> + <para>Only links marked with the <constant>DYNAMIC</constant> link flag can + be enabled/disabled while streaming media data. Attempting to enable or + disable a streaming non-dynamic link will return an &EBUSY;.</para> + <para>If the specified link can't be found the driver returns with an + &EINVAL;.</para> + </refsect1> + + <refsect1> + &return-value; + + <variablelist> + <varlistentry> + <term><errorcode>EBUSY</errorcode></term> + <listitem> + <para>The link properties can't be changed because the link is + currently busy. This can be caused, for instance, by an active media + stream (audio or video) on the link. The ioctl shouldn't be retried if + no other action is performed before to fix the problem.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><errorcode>EINVAL</errorcode></term> + <listitem> + <para>The &media-link-desc; references a non-existing link, or the + link is immutable and an attempt to modify its configuration was made. + </para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> +</refentry> diff --git a/Documentation/DocBook/v4l/nv12mt.gif b/Documentation/DocBook/v4l/nv12mt.gif Binary files differnew file mode 100644 index 000000000000..ef2d4cf8367b --- /dev/null +++ b/Documentation/DocBook/v4l/nv12mt.gif diff --git a/Documentation/DocBook/v4l/nv12mt_example.gif b/Documentation/DocBook/v4l/nv12mt_example.gif Binary files differnew file mode 100644 index 000000000000..df81d68108ee --- /dev/null +++ b/Documentation/DocBook/v4l/nv12mt_example.gif diff --git a/Documentation/DocBook/v4l/pipeline.pdf b/Documentation/DocBook/v4l/pipeline.pdf Binary files differnew file mode 100644 index 000000000000..ee3e37f04b6a --- /dev/null +++ b/Documentation/DocBook/v4l/pipeline.pdf diff --git a/Documentation/DocBook/v4l/pipeline.png b/Documentation/DocBook/v4l/pipeline.png Binary files differnew file mode 100644 index 000000000000..f19b86c2c24d --- /dev/null +++ b/Documentation/DocBook/v4l/pipeline.png diff --git a/Documentation/DocBook/v4l/pixfmt-nv12m.xml b/Documentation/DocBook/v4l/pixfmt-nv12m.xml new file mode 100644 index 000000000000..c9e166d9ded8 --- /dev/null +++ b/Documentation/DocBook/v4l/pixfmt-nv12m.xml @@ -0,0 +1,154 @@ + <refentry id="V4L2-PIX-FMT-NV12M"> + <refmeta> + <refentrytitle>V4L2_PIX_FMT_NV12M ('NV12M')</refentrytitle> + &manvol; + </refmeta> + <refnamediv> + <refname> <constant>V4L2_PIX_FMT_NV12M</constant></refname> + <refpurpose>Variation of <constant>V4L2_PIX_FMT_NV12</constant> with planes + non contiguous in memory. </refpurpose> + </refnamediv> + <refsect1> + <title>Description</title> + + <para>This is a multi-planar, two-plane version of the YUV 4:2:0 format. +The three components are separated into two sub-images or planes. +<constant>V4L2_PIX_FMT_NV12M</constant> differs from <constant>V4L2_PIX_FMT_NV12 +</constant> in that the two planes are non-contiguous in memory, i.e. the chroma +plane do not necessarily immediately follows the luma plane. +The luminance data occupies the first plane. The Y plane has one byte per pixel. +In the second plane there is a chrominance data with alternating chroma samples. +The CbCr plane is the same width, in bytes, as the Y plane (and of the image), +but is half as tall in pixels. Each CbCr pair belongs to four pixels. For example, +Cb<subscript>0</subscript>/Cr<subscript>0</subscript> belongs to +Y'<subscript>00</subscript>, Y'<subscript>01</subscript>, +Y'<subscript>10</subscript>, Y'<subscript>11</subscript>. </para> + + <para><constant>V4L2_PIX_FMT_NV12M</constant> is intended to be +used only in drivers and applications that support the multi-planar API, +described in <xref linkend="planar-apis"/>. </para> + + <para>If the Y plane has pad bytes after each row, then the +CbCr plane has as many pad bytes after its rows.</para> + + <example> + <title><constant>V4L2_PIX_FMT_NV12M</constant> 4 × 4 pixel image</title> + + <formalpara> + <title>Byte Order.</title> + <para>Each cell is one byte. + <informaltable frame="none"> + <tgroup cols="5" align="center"> + <colspec align="left" colwidth="2*" /> + <tbody valign="top"> + <row> + <entry>start0 + 0:</entry> + <entry>Y'<subscript>00</subscript></entry> + <entry>Y'<subscript>01</subscript></entry> + <entry>Y'<subscript>02</subscript></entry> + <entry>Y'<subscript>03</subscript></entry> + </row> + <row> + <entry>start0 + 4:</entry> + <entry>Y'<subscript>10</subscript></entry> + <entry>Y'<subscript>11</subscript></entry> + <entry>Y'<subscript>12</subscript></entry> + <entry>Y'<subscript>13</subscript></entry> + </row> + <row> + <entry>start0 + 8:</entry> + <entry>Y'<subscript>20</subscript></entry> + <entry>Y'<subscript>21</subscript></entry> + <entry>Y'<subscript>22</subscript></entry> + <entry>Y'<subscript>23</subscript></entry> + </row> + <row> + <entry>start0 + 12:</entry> + <entry>Y'<subscript>30</subscript></entry> + <entry>Y'<subscript>31</subscript></entry> + <entry>Y'<subscript>32</subscript></entry> + <entry>Y'<subscript>33</subscript></entry> + </row> + <row> + <entry></entry> + </row> + <row> + <entry>start1 + 0:</entry> + <entry>Cb<subscript>00</subscript></entry> + <entry>Cr<subscript>00</subscript></entry> + <entry>Cb<subscript>01</subscript></entry> + <entry>Cr<subscript>01</subscript></entry> + </row> + <row> + <entry>start1 + 4:</entry> + <entry>Cb<subscript>10</subscript></entry> + <entry>Cr<subscript>10</subscript></entry> + <entry>Cb<subscript>11</subscript></entry> + <entry>Cr<subscript>11</subscript></entry> + </row> + </tbody> + </tgroup> + </informaltable> + </para> + </formalpara> + + <formalpara> + <title>Color Sample Location.</title> + <para> + <informaltable frame="none"> + <tgroup cols="7" align="center"> + <tbody valign="top"> + <row> + <entry></entry> + <entry>0</entry><entry></entry><entry>1</entry><entry></entry> + <entry>2</entry><entry></entry><entry>3</entry> + </row> + <row> + <entry>0</entry> + <entry>Y</entry><entry></entry><entry>Y</entry><entry></entry> + <entry>Y</entry><entry></entry><entry>Y</entry> + </row> + <row> + <entry></entry> + <entry></entry><entry>C</entry><entry></entry><entry></entry> + <entry></entry><entry>C</entry><entry></entry> + </row> + <row> + <entry>1</entry> + <entry>Y</entry><entry></entry><entry>Y</entry><entry></entry> + <entry>Y</entry><entry></entry><entry>Y</entry> + </row> + <row> + <entry></entry> + </row> + <row> + <entry>2</entry> + <entry>Y</entry><entry></entry><entry>Y</entry><entry></entry> + <entry>Y</entry><entry></entry><entry>Y</entry> + </row> + <row> + <entry></entry> + <entry></entry><entry>C</entry><entry></entry><entry></entry> + <entry></entry><entry>C</entry><entry></entry> + </row> + <row> + <entry>3</entry> + <entry>Y</entry><entry></entry><entry>Y</entry><entry></entry> + <entry>Y</entry><entry></entry><entry>Y</entry> + </row> + </tbody> + </tgroup> + </informaltable> + </para> + </formalpara> + </example> + </refsect1> + </refentry> + + <!-- +Local Variables: +mode: sgml +sgml-parent-document: "pixfmt.sgml" +indent-tabs-mode: nil +End: + --> diff --git a/Documentation/DocBook/v4l/pixfmt-nv12mt.xml b/Documentation/DocBook/v4l/pixfmt-nv12mt.xml new file mode 100644 index 000000000000..7a2855a526c1 --- /dev/null +++ b/Documentation/DocBook/v4l/pixfmt-nv12mt.xml @@ -0,0 +1,74 @@ + <refentry> + <refmeta> + <refentrytitle>V4L2_PIX_FMT_NV12MT ('TM12')</refentrytitle> + &manvol; + </refmeta> + <refnamediv> + <refname id="V4L2-PIX-FMT-NV12MT"><constant>V4L2_PIX_FMT_NV12MT +</constant></refname> + <refpurpose>Formats with ½ horizontal and vertical +chroma resolution. This format has two planes - one for luminance and one for +chrominance. Chroma samples are interleaved. The difference to +<constant>V4L2_PIX_FMT_NV12</constant> is the memory layout. Pixels are +grouped in macroblocks of 64x32 size. The order of macroblocks in memory is +also not standard. + </refpurpose> + </refnamediv> + <refsect1> + <title>Description</title> + + <para>This is the two-plane versions of the YUV 4:2:0 format where data +is grouped into 64x32 macroblocks. The three components are separated into two +sub-images or planes. The Y plane has one byte per pixel and pixels are grouped +into 64x32 macroblocks. The CbCr plane has the same width, in bytes, as the Y +plane (and the image), but is half as tall in pixels. The chroma plane is also +grouped into 64x32 macroblocks.</para> + <para>Width of the buffer has to be aligned to the multiple of 128, and +height alignment is 32. Every four adjactent buffers - two horizontally and two +vertically are grouped together and are located in memory in Z or flipped Z +order. </para> + <para>Layout of macroblocks in memory is presented in the following +figure.</para> + <para><figure id="nv12mt"> + <title><constant>V4L2_PIX_FMT_NV12MT</constant> macroblock Z shape +memory layout</title> + <mediaobject> + <imageobject> + <imagedata fileref="nv12mt.gif" format="GIF" /> + </imageobject> + </mediaobject> + </figure> + The requirement that width is multiple of 128 is implemented because, +the Z shape cannot be cut in half horizontally. In case the vertical resolution +of macroblocks is odd then the last row of macroblocks is arranged in a linear +order. </para> + <para>In case of chroma the layout is identical. Cb and Cr samples are +interleaved. Height of the buffer is aligned to 32. + </para> + <example> + <title>Memory layout of macroblocks in <constant>V4L2_PIX_FMT_NV12 +</constant> format pixel image - extreme case</title> + <para> + <figure id="nv12mt_ex"> + <title>Example <constant>V4L2_PIX_FMT_NV12MT</constant> memory +layout of macroblocks</title> + <mediaobject> + <imageobject> + <imagedata fileref="nv12mt_example.gif" format="GIF" /> + </imageobject> + </mediaobject> + </figure> + Memory layout of macroblocks of <constant>V4L2_PIX_FMT_NV12MT +</constant> format in most extreme case. + </para> + </example> + </refsect1> + </refentry> + + <!-- +Local Variables: +mode: sgml +sgml-parent-document: "pixfmt.sgml" +indent-tabs-mode: nil +End: + --> diff --git a/Documentation/DocBook/v4l/pixfmt-srggb12.xml b/Documentation/DocBook/v4l/pixfmt-srggb12.xml new file mode 100644 index 000000000000..9ba4fb690bc0 --- /dev/null +++ b/Documentation/DocBook/v4l/pixfmt-srggb12.xml @@ -0,0 +1,90 @@ + <refentry> + <refmeta> + <refentrytitle>V4L2_PIX_FMT_SRGGB12 ('RG12'), + V4L2_PIX_FMT_SGRBG12 ('BA12'), + V4L2_PIX_FMT_SGBRG12 ('GB12'), + V4L2_PIX_FMT_SBGGR12 ('BG12'), + </refentrytitle> + &manvol; + </refmeta> + <refnamediv> + <refname id="V4L2-PIX-FMT-SRGGB12"><constant>V4L2_PIX_FMT_SRGGB12</constant></refname> + <refname id="V4L2-PIX-FMT-SGRBG12"><constant>V4L2_PIX_FMT_SGRBG12</constant></refname> + <refname id="V4L2-PIX-FMT-SGBRG12"><constant>V4L2_PIX_FMT_SGBRG12</constant></refname> + <refname id="V4L2-PIX-FMT-SBGGR12"><constant>V4L2_PIX_FMT_SBGGR12</constant></refname> + <refpurpose>12-bit Bayer formats expanded to 16 bits</refpurpose> + </refnamediv> + <refsect1> + <title>Description</title> + + <para>The following four pixel formats are raw sRGB / Bayer formats with +12 bits per colour. Each colour component is stored in a 16-bit word, with 6 +unused high bits filled with zeros. Each n-pixel row contains n/2 green samples +and n/2 blue or red samples, with alternating red and blue rows. Bytes are +stored in memory in little endian order. They are conventionally described +as GRGR... BGBG..., RGRG... GBGB..., etc. Below is an example of one of these +formats</para> + + <example> + <title><constant>V4L2_PIX_FMT_SBGGR12</constant> 4 × 4 +pixel image</title> + + <formalpara> + <title>Byte Order.</title> + <para>Each cell is one byte, high 6 bits in high bytes are 0. + <informaltable frame="none"> + <tgroup cols="5" align="center"> + <colspec align="left" colwidth="2*" /> + <tbody valign="top"> + <row> + <entry>start + 0:</entry> + <entry>B<subscript>00low</subscript></entry> + <entry>B<subscript>00high</subscript></entry> + <entry>G<subscript>01low</subscript></entry> + <entry>G<subscript>01high</subscript></entry> + <entry>B<subscript>02low</subscript></entry> + <entry>B<subscript>02high</subscript></entry> + <entry>G<subscript>03low</subscript></entry> + <entry>G<subscript>03high</subscript></entry> + </row> + <row> + <entry>start + 8:</entry> + <entry>G<subscript>10low</subscript></entry> + <entry>G<subscript>10high</subscript></entry> + <entry>R<subscript>11low</subscript></entry> + <entry>R<subscript>11high</subscript></entry> + <entry>G<subscript>12low</subscript></entry> + <entry>G<subscript>12high</subscript></entry> + <entry>R<subscript>13low</subscript></entry> + <entry>R<subscript>13high</subscript></entry> + </row> + <row> + <entry>start + 16:</entry> + <entry>B<subscript>20low</subscript></entry> + <entry>B<subscript>20high</subscript></entry> + <entry>G<subscript>21low</subscript></entry> + <entry>G<subscript>21high</subscript></entry> + <entry>B<subscript>22low</subscript></entry> + <entry>B<subscript>22high</subscript></entry> + <entry>G<subscript>23low</subscript></entry> + <entry>G<subscript>23high</subscript></entry> + </row> + <row> + <entry>start + 24:</entry> + <entry>G<subscript>30low</subscript></entry> + <entry>G<subscript>30high</subscript></entry> + <entry>R<subscript>31low</subscript></entry> + <entry>R<subscript>31high</subscript></entry> + <entry>G<subscript>32low</subscript></entry> + <entry>G<subscript>32high</subscript></entry> + <entry>R<subscript>33low</subscript></entry> + <entry>R<subscript>33high</subscript></entry> + </row> + </tbody> + </tgroup> + </informaltable> + </para> + </formalpara> + </example> + </refsect1> +</refentry> diff --git a/Documentation/DocBook/v4l/pixfmt-y12.xml b/Documentation/DocBook/v4l/pixfmt-y12.xml new file mode 100644 index 000000000000..ff417b858cc9 --- /dev/null +++ b/Documentation/DocBook/v4l/pixfmt-y12.xml @@ -0,0 +1,79 @@ +<refentry id="V4L2-PIX-FMT-Y12"> + <refmeta> + <refentrytitle>V4L2_PIX_FMT_Y12 ('Y12 ')</refentrytitle> + &manvol; + </refmeta> + <refnamediv> + <refname><constant>V4L2_PIX_FMT_Y12</constant></refname> + <refpurpose>Grey-scale image</refpurpose> + </refnamediv> + <refsect1> + <title>Description</title> + + <para>This is a grey-scale image with a depth of 12 bits per pixel. Pixels +are stored in 16-bit words with unused high bits padded with 0. The least +significant byte is stored at lower memory addresses (little-endian).</para> + + <example> + <title><constant>V4L2_PIX_FMT_Y12</constant> 4 × 4 +pixel image</title> + + <formalpara> + <title>Byte Order.</title> + <para>Each cell is one byte. + <informaltable frame="none"> + <tgroup cols="9" align="center"> + <colspec align="left" colwidth="2*" /> + <tbody valign="top"> + <row> + <entry>start + 0:</entry> + <entry>Y'<subscript>00low</subscript></entry> + <entry>Y'<subscript>00high</subscript></entry> + <entry>Y'<subscript>01low</subscript></entry> + <entry>Y'<subscript>01high</subscript></entry> + <entry>Y'<subscript>02low</subscript></entry> + <entry>Y'<subscript>02high</subscript></entry> + <entry>Y'<subscript>03low</subscript></entry> + <entry>Y'<subscript>03high</subscript></entry> + </row> + <row> + <entry>start + 8:</entry> + <entry>Y'<subscript>10low</subscript></entry> + <entry>Y'<subscript>10high</subscript></entry> + <entry>Y'<subscript>11low</subscript></entry> + <entry>Y'<subscript>11high</subscript></entry> + <entry>Y'<subscript>12low</subscript></entry> + <entry>Y'<subscript>12high</subscript></entry> + <entry>Y'<subscript>13low</subscript></entry> + <entry>Y'<subscript>13high</subscript></entry> + </row> + <row> + <entry>start + 16:</entry> + <entry>Y'<subscript>20low</subscript></entry> + <entry>Y'<subscript>20high</subscript></entry> + <entry>Y'<subscript>21low</subscript></entry> + <entry>Y'<subscript>21high</subscript></entry> + <entry>Y'<subscript>22low</subscript></entry> + <entry>Y'<subscript>22high</subscript></entry> + <entry>Y'<subscript>23low</subscript></entry> + <entry>Y'<subscript>23high</subscript></entry> + </row> + <row> + <entry>start + 24:</entry> + <entry>Y'<subscript>30low</subscript></entry> + <entry>Y'<subscript>30high</subscript></entry> + <entry>Y'<subscript>31low</subscript></entry> + <entry>Y'<subscript>31high</subscript></entry> + <entry>Y'<subscript>32low</subscript></entry> + <entry>Y'<subscript>32high</subscript></entry> + <entry>Y'<subscript>33low</subscript></entry> + <entry>Y'<subscript>33high</subscript></entry> + </row> + </tbody> + </tgroup> + </informaltable> + </para> + </formalpara> + </example> + </refsect1> +</refentry> diff --git a/Documentation/DocBook/v4l/pixfmt-yuv420m.xml b/Documentation/DocBook/v4l/pixfmt-yuv420m.xml new file mode 100644 index 000000000000..f5d8f57495c8 --- /dev/null +++ b/Documentation/DocBook/v4l/pixfmt-yuv420m.xml @@ -0,0 +1,162 @@ + <refentry id="V4L2-PIX-FMT-YUV420M"> + <refmeta> + <refentrytitle>V4L2_PIX_FMT_YUV420M ('YU12M')</refentrytitle> + &manvol; + </refmeta> + <refnamediv> + <refname> <constant>V4L2_PIX_FMT_YUV420M</constant></refname> + <refpurpose>Variation of <constant>V4L2_PIX_FMT_YUV420</constant> + with planes non contiguous in memory. </refpurpose> + </refnamediv> + + <refsect1> + <title>Description</title> + + <para>This is a multi-planar format, as opposed to a packed format. +The three components are separated into three sub- images or planes. + +The Y plane is first. The Y plane has one byte per pixel. The Cb data +constitutes the second plane which is half the width and half +the height of the Y plane (and of the image). Each Cb belongs to four +pixels, a two-by-two square of the image. For example, +Cb<subscript>0</subscript> belongs to Y'<subscript>00</subscript>, +Y'<subscript>01</subscript>, Y'<subscript>10</subscript>, and +Y'<subscript>11</subscript>. The Cr data, just like the Cb plane, is +in the third plane. </para> + + <para>If the Y plane has pad bytes after each row, then the Cb +and Cr planes have half as many pad bytes after their rows. In other +words, two Cx rows (including padding) is exactly as long as one Y row +(including padding).</para> + + <para><constant>V4L2_PIX_FMT_NV12M</constant> is intended to be +used only in drivers and applications that support the multi-planar API, +described in <xref linkend="planar-apis"/>. </para> + + <example> + <title><constant>V4L2_PIX_FMT_YVU420M</constant> 4 × 4 +pixel image</title> + + <formalpara> + <title>Byte Order.</title> + <para>Each cell is one byte. + <informaltable frame="none"> + <tgroup cols="5" align="center"> + <colspec align="left" colwidth="2*" /> + <tbody valign="top"> + <row> + <entry>start0 + 0:</entry> + <entry>Y'<subscript>00</subscript></entry> + <entry>Y'<subscript>01</subscript></entry> + <entry>Y'<subscript>02</subscript></entry> + <entry>Y'<subscript>03</subscript></entry> + </row> + <row> + <entry>start0 + 4:</entry> + <entry>Y'<subscript>10</subscript></entry> + <entry>Y'<subscript>11</subscript></entry> + <entry>Y'<subscript>12</subscript></entry> + <entry>Y'<subscript>13</subscript></entry> + </row> + <row> + <entry>start0 + 8:</entry> + <entry>Y'<subscript>20</subscript></entry> + <entry>Y'<subscript>21</subscript></entry> + <entry>Y'<subscript>22</subscript></entry> + <entry>Y'<subscript>23</subscript></entry> + </row> + <row> + <entry>start0 + 12:</entry> + <entry>Y'<subscript>30</subscript></entry> + <entry>Y'<subscript>31</subscript></entry> + <entry>Y'<subscript>32</subscript></entry> + <entry>Y'<subscript>33</subscript></entry> + </row> + <row><entry></entry></row> + <row> + <entry>start1 + 0:</entry> + <entry>Cb<subscript>00</subscript></entry> + <entry>Cb<subscript>01</subscript></entry> + </row> + <row> + <entry>start1 + 2:</entry> + <entry>Cb<subscript>10</subscript></entry> + <entry>Cb<subscript>11</subscript></entry> + </row> + <row><entry></entry></row> + <row> + <entry>start2 + 0:</entry> + <entry>Cr<subscript>00</subscript></entry> + <entry>Cr<subscript>01</subscript></entry> + </row> + <row> + <entry>start2 + 2:</entry> + <entry>Cr<subscript>10</subscript></entry> + <entry>Cr<subscript>11</subscript></entry> + </row> + </tbody> + </tgroup> + </informaltable> + </para> + </formalpara> + + <formalpara> + <title>Color Sample Location.</title> + <para> + <informaltable frame="none"> + <tgroup cols="7" align="center"> + <tbody valign="top"> + <row> + <entry></entry> + <entry>0</entry><entry></entry><entry>1</entry><entry></entry> + <entry>2</entry><entry></entry><entry>3</entry> + </row> + <row> + <entry>0</entry> + <entry>Y</entry><entry></entry><entry>Y</entry><entry></entry> + <entry>Y</entry><entry></entry><entry>Y</entry> + </row> + <row> + <entry></entry> + <entry></entry><entry>C</entry><entry></entry><entry></entry> + <entry></entry><entry>C</entry><entry></entry> + </row> + <row> + <entry>1</entry> + <entry>Y</entry><entry></entry><entry>Y</entry><entry></entry> + <entry>Y</entry><entry></entry><entry>Y</entry> + </row> + <row> + <entry></entry> + </row> + <row> + <entry>2</entry> + <entry>Y</entry><entry></entry><entry>Y</entry><entry></entry> + <entry>Y</entry><entry></entry><entry>Y</entry> + </row> + <row> + <entry></entry> + <entry></entry><entry>C</entry><entry></entry><entry></entry> + <entry></entry><entry>C</entry><entry></entry> + </row> + <row> + <entry>3</entry> + <entry>Y</entry><entry></entry><entry>Y</entry><entry></entry> + <entry>Y</entry><entry></entry><entry>Y</entry> + </row> + </tbody> + </tgroup> + </informaltable> + </para> + </formalpara> + </example> + </refsect1> + </refentry> + + <!-- +Local Variables: +mode: sgml +sgml-parent-document: "pixfmt.sgml" +indent-tabs-mode: nil +End: + --> diff --git a/Documentation/DocBook/v4l/pixfmt.xml b/Documentation/DocBook/v4l/pixfmt.xml index cfffc88d7383..40af4beb48b9 100644 --- a/Documentation/DocBook/v4l/pixfmt.xml +++ b/Documentation/DocBook/v4l/pixfmt.xml @@ -2,12 +2,16 @@ <para>The V4L2 API was primarily designed for devices exchanging image data with applications. The -<structname>v4l2_pix_format</structname> structure defines the format -and layout of an image in memory. Image formats are negotiated with -the &VIDIOC-S-FMT; ioctl. (The explanations here focus on video +<structname>v4l2_pix_format</structname> and <structname>v4l2_pix_format_mplane +</structname> structures define the format and layout of an image in memory. +The former is used with the single-planar API, while the latter is used with the +multi-planar version (see <xref linkend="planar-apis"/>). Image formats are +negotiated with the &VIDIOC-S-FMT; ioctl. (The explanations here focus on video capturing and output, for overlay frame buffer formats see also &VIDIOC-G-FBUF;.)</para> +<section> + <title>Single-planar format structure</title> <table pgwide="1" frame="none" id="v4l2-pix-format"> <title>struct <structname>v4l2_pix_format</structname></title> <tgroup cols="3"> @@ -106,6 +110,98 @@ set this field to zero.</entry> </tbody> </tgroup> </table> +</section> + +<section> + <title>Multi-planar format structures</title> + <para>The <structname>v4l2_plane_pix_format</structname> structures define + size and layout for each of the planes in a multi-planar format. + The <structname>v4l2_pix_format_mplane</structname> structure contains + information common to all planes (such as image width and height) and + an array of <structname>v4l2_plane_pix_format</structname> structures, + describing all planes of that format.</para> + <table pgwide="1" frame="none" id="v4l2-plane-pix-format"> + <title>struct <structname>vl42_plane_pix_format</structname></title> + <tgroup cols="3"> + &cs-str; + <tbody valign="top"> + <row> + <entry>__u32</entry> + <entry><structfield>sizeimage</structfield></entry> + <entry>Maximum size in bytes required for image data in this plane. + </entry> + </row> + <row> + <entry>__u16</entry> + <entry><structfield>bytesperline</structfield></entry> + <entry>Distance in bytes between the leftmost pixels in two adjacent + lines.</entry> + </row> + <row> + <entry>__u16</entry> + <entry><structfield>reserved[7]</structfield></entry> + <entry>Reserved for future extensions. Should be zeroed by the + application.</entry> + </row> + </tbody> + </tgroup> + </table> + <table pgwide="1" frame="none" id="v4l2-pix-format-mplane"> + <title>struct <structname>v4l2_pix_format_mplane</structname></title> + <tgroup cols="3"> + &cs-str; + <tbody valign="top"> + <row> + <entry>__u32</entry> + <entry><structfield>width</structfield></entry> + <entry>Image width in pixels.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>height</structfield></entry> + <entry>Image height in pixels.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>pixelformat</structfield></entry> + <entry>The pixel format. Both single- and multi-planar four character +codes can be used.</entry> + </row> + <row> + <entry>&v4l2-field;</entry> + <entry><structfield>field</structfield></entry> + <entry>See &v4l2-pix-format;.</entry> + </row> + <row> + <entry>&v4l2-colorspace;</entry> + <entry><structfield>colorspace</structfield></entry> + <entry>See &v4l2-pix-format;.</entry> + </row> + <row> + <entry>&v4l2-plane-pix-format;</entry> + <entry><structfield>plane_fmt[VIDEO_MAX_PLANES]</structfield></entry> + <entry>An array of structures describing format of each plane this + pixel format consists of. The number of valid entries in this array + has to be put in the <structfield>num_planes</structfield> + field.</entry> + </row> + <row> + <entry>__u8</entry> + <entry><structfield>num_planes</structfield></entry> + <entry>Number of planes (i.e. separate memory buffers) for this format + and the number of valid entries in the + <structfield>plane_fmt</structfield> array.</entry> + </row> + <row> + <entry>__u8</entry> + <entry><structfield>reserved[11]</structfield></entry> + <entry>Reserved for future extensions. Should be zeroed by the + application.</entry> + </row> + </tbody> + </tgroup> + </table> +</section> <section> <title>Standard Image Formats</title> @@ -142,11 +238,19 @@ leftmost pixel of the second row from the top, and so on. The last row has just as many pad bytes after it as the other rows.</para> <para>In V4L2 each format has an identifier which looks like -<constant>PIX_FMT_XXX</constant>, defined in the <filename>videodev2.h</filename> -header file. These identifiers -represent <link linkend="v4l2-fourcc">four character codes</link> +<constant>PIX_FMT_XXX</constant>, defined in the <link +linkend="videodev">videodev.h</link> header file. These identifiers +represent <link linkend="v4l2-fourcc">four character (FourCC) codes</link> which are also listed below, however they are not the same as those used in the Windows world.</para> + + <para>For some formats, data is stored in separate, discontiguous +memory buffers. Those formats are identified by a separate set of FourCC codes +and are referred to as "multi-planar formats". For example, a YUV422 frame is +normally stored in one memory buffer, but it can also be placed in two or three +separate buffers, with Y component in one buffer and CbCr components in another +in the 2-planar version or with each component in its own buffer in the +3-planar case. Those sub-buffers are referred to as "planes".</para> </section> <section id="colorspaces"> @@ -592,6 +696,7 @@ information.</para> &sub-packed-yuv; &sub-grey; &sub-y10; + &sub-y12; &sub-y16; &sub-yuyv; &sub-uyvy; @@ -599,10 +704,13 @@ information.</para> &sub-vyuy; &sub-y41p; &sub-yuv420; + &sub-yuv420m; &sub-yuv410; &sub-yuv422p; &sub-yuv411p; &sub-nv12; + &sub-nv12m; + &sub-nv12mt; &sub-nv16; </section> diff --git a/Documentation/DocBook/v4l/planar-apis.xml b/Documentation/DocBook/v4l/planar-apis.xml new file mode 100644 index 000000000000..878ce2040488 --- /dev/null +++ b/Documentation/DocBook/v4l/planar-apis.xml @@ -0,0 +1,62 @@ +<section id="planar-apis"> + <title>Single- and multi-planar APIs</title> + + <para>Some devices require data for each input or output video frame + to be placed in discontiguous memory buffers. In such cases, one + video frame has to be addressed using more than one memory address, i.e. one + pointer per "plane". A plane is a sub-buffer of the current frame. For + examples of such formats see <xref linkend="pixfmt" />.</para> + + <para>Initially, V4L2 API did not support multi-planar buffers and a set of + extensions has been introduced to handle them. Those extensions constitute + what is being referred to as the "multi-planar API".</para> + + <para>Some of the V4L2 API calls and structures are interpreted differently, + depending on whether single- or multi-planar API is being used. An application + can choose whether to use one or the other by passing a corresponding buffer + type to its ioctl calls. Multi-planar versions of buffer types are suffixed + with an `_MPLANE' string. For a list of available multi-planar buffer types + see &v4l2-buf-type;. + </para> + + <section> + <title>Multi-planar formats</title> + <para>Multi-planar API introduces new multi-planar formats. Those formats + use a separate set of FourCC codes. It is important to distinguish between + the multi-planar API and a multi-planar format. Multi-planar API calls can + handle all single-planar formats as well (as long as they are passed in + multi-planar API structures), while the single-planar API cannot + handle multi-planar formats.</para> + </section> + + <section> + <title>Calls that distinguish between single and multi-planar APIs</title> + <variablelist> + <varlistentry> + <term>&VIDIOC-QUERYCAP;</term> + <listitem><para>Two additional multi-planar capabilities are added. They can + be set together with non-multi-planar ones for devices that handle + both single- and multi-planar formats.</para></listitem> + </varlistentry> + <varlistentry> + <term>&VIDIOC-G-FMT;, &VIDIOC-S-FMT;, &VIDIOC-TRY-FMT;</term> + <listitem><para>New structures for describing multi-planar formats are added: + &v4l2-pix-format-mplane; and &v4l2-plane-pix-format;. Drivers may + define new multi-planar formats, which have distinct FourCC codes from + the existing single-planar ones.</para> + </listitem> + </varlistentry> + <varlistentry> + <term>&VIDIOC-QBUF;, &VIDIOC-DQBUF;, &VIDIOC-QUERYBUF;</term> + <listitem><para>A new &v4l2-plane; structure for describing planes is added. + Arrays of this structure are passed in the new + <structfield>m.planes</structfield> field of &v4l2-buffer;.</para> + </listitem> + </varlistentry> + <varlistentry> + <term>&VIDIOC-REQBUFS;</term> + <listitem><para>Will allocate multi-planar buffers as requested.</para></listitem> + </varlistentry> + </variablelist> + </section> +</section> diff --git a/Documentation/DocBook/v4l/remote_controllers.xml b/Documentation/DocBook/v4l/remote_controllers.xml index 3c3b667b28e7..160e464d44b7 100644 --- a/Documentation/DocBook/v4l/remote_controllers.xml +++ b/Documentation/DocBook/v4l/remote_controllers.xml @@ -133,7 +133,7 @@ different IR's. Due to that, V4L2 API now specifies a standard for mapping Media <row><entry><constant>KEY_LEFT</constant></entry><entry>Left key</entry><entry>LEFT</entry></row> <row><entry><constant>KEY_RIGHT</constant></entry><entry>Right key</entry><entry>RIGHT</entry></row> -<row><entry><emphasis role="bold">Miscelaneous keys</emphasis></entry></row> +<row><entry><emphasis role="bold">Miscellaneous keys</emphasis></entry></row> <row><entry><constant>KEY_DOT</constant></entry><entry>Return a dot</entry><entry>.</entry></row> <row><entry><constant>KEY_FN</constant></entry><entry>Select a function</entry><entry>FUNCTION</entry></row> diff --git a/Documentation/DocBook/v4l/subdev-formats.xml b/Documentation/DocBook/v4l/subdev-formats.xml new file mode 100644 index 000000000000..d7ccd25edcc1 --- /dev/null +++ b/Documentation/DocBook/v4l/subdev-formats.xml @@ -0,0 +1,2526 @@ +<section id="v4l2-mbus-format"> + <title>Media Bus Formats</title> + + <table pgwide="1" frame="none" id="v4l2-mbus-framefmt"> + <title>struct <structname>v4l2_mbus_framefmt</structname></title> + <tgroup cols="3"> + &cs-str; + <tbody valign="top"> + <row> + <entry>__u32</entry> + <entry><structfield>width</structfield></entry> + <entry>Image width, in pixels.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>height</structfield></entry> + <entry>Image height, in pixels.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>code</structfield></entry> + <entry>Format code, from &v4l2-mbus-pixelcode;.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>field</structfield></entry> + <entry>Field order, from &v4l2-field;. See + <xref linkend="field-order" /> for details.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>colorspace</structfield></entry> + <entry>Image colorspace, from &v4l2-colorspace;. See + <xref linkend="colorspaces" /> for details.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>reserved</structfield>[7]</entry> + <entry>Reserved for future extensions. Applications and drivers must + set the array to zero.</entry> + </row> + </tbody> + </tgroup> + </table> + + <section id="v4l2-mbus-pixelcode"> + <title>Media Bus Pixel Codes</title> + + <para>The media bus pixel codes describe image formats as flowing over + physical busses (both between separate physical components and inside SoC + devices). This should not be confused with the V4L2 pixel formats that + describe, using four character codes, image formats as stored in memory. + </para> + + <para>While there is a relationship between image formats on busses and + image formats in memory (a raw Bayer image won't be magically converted to + JPEG just by storing it to memory), there is no one-to-one correspondance + between them.</para> + + <section> + <title>Packed RGB Formats</title> + + <para>Those formats transfer pixel data as red, green and blue components. + The format code is made of the following information. + <itemizedlist> + <listitem><para>The red, green and blue components order code, as encoded in a + pixel sample. Possible values are RGB and BGR.</para></listitem> + <listitem><para>The number of bits per component, for each component. The values + can be different for all components. Common values are 555 and 565.</para> + </listitem> + <listitem><para>The number of bus samples per pixel. Pixels that are wider than + the bus width must be transferred in multiple samples. Common values are + 1 and 2.</para></listitem> + <listitem><para>The bus width.</para></listitem> + <listitem><para>For formats where the total number of bits per pixel is smaller + than the number of bus samples per pixel times the bus width, a padding + value stating if the bytes are padded in their most high order bits + (PADHI) or low order bits (PADLO).</para></listitem> + <listitem><para>For formats where the number of bus samples per pixel is larger + than 1, an endianness value stating if the pixel is transferred MSB first + (BE) or LSB first (LE).</para></listitem> + </itemizedlist> + </para> + + <para>For instance, a format where pixels are encoded as 5-bits red, 5-bits + green and 5-bit blue values padded on the high bit, transferred as 2 8-bit + samples per pixel with the most significant bits (padding, red and half of + the green value) transferred first will be named + <constant>V4L2_MBUS_FMT_RGB555_2X8_PADHI_BE</constant>. + </para> + + <para>The following tables list existing packet RGB formats.</para> + + <table pgwide="0" frame="none" id="v4l2-mbus-pixelcode-rgb"> + <title>RGB formats</title> + <tgroup cols="11"> + <colspec colname="id" align="left" /> + <colspec colname="code" align="center"/> + <colspec colname="bit" /> + <colspec colnum="4" colname="b07" align="center" /> + <colspec colnum="5" colname="b06" align="center" /> + <colspec colnum="6" colname="b05" align="center" /> + <colspec colnum="7" colname="b04" align="center" /> + <colspec colnum="8" colname="b03" align="center" /> + <colspec colnum="9" colname="b02" align="center" /> + <colspec colnum="10" colname="b01" align="center" /> + <colspec colnum="11" colname="b00" align="center" /> + <spanspec namest="b07" nameend="b00" spanname="b0" /> + <thead> + <row> + <entry>Identifier</entry> + <entry>Code</entry> + <entry></entry> + <entry spanname="b0">Data organization</entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry>Bit</entry> + <entry>7</entry> + <entry>6</entry> + <entry>5</entry> + <entry>4</entry> + <entry>3</entry> + <entry>2</entry> + <entry>1</entry> + <entry>0</entry> + </row> + </thead> + <tbody valign="top"> + <row id="V4L2-MBUS-FMT-RGB444-2X8-PADHI-BE"> + <entry>V4L2_MBUS_FMT_RGB444_2X8_PADHI_BE</entry> + <entry>0x1001</entry> + <entry></entry> + <entry>0</entry> + <entry>0</entry> + <entry>0</entry> + <entry>0</entry> + <entry>r<subscript>3</subscript></entry> + <entry>r<subscript>2</subscript></entry> + <entry>r<subscript>1</subscript></entry> + <entry>r<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>g<subscript>3</subscript></entry> + <entry>g<subscript>2</subscript></entry> + <entry>g<subscript>1</subscript></entry> + <entry>g<subscript>0</subscript></entry> + <entry>b<subscript>3</subscript></entry> + <entry>b<subscript>2</subscript></entry> + <entry>b<subscript>1</subscript></entry> + <entry>b<subscript>0</subscript></entry> + </row> + <row id="V4L2-MBUS-FMT-RGB444-2X8-PADHI-LE"> + <entry>V4L2_MBUS_FMT_RGB444_2X8_PADHI_LE</entry> + <entry>0x1002</entry> + <entry></entry> + <entry>g<subscript>3</subscript></entry> + <entry>g<subscript>2</subscript></entry> + <entry>g<subscript>1</subscript></entry> + <entry>g<subscript>0</subscript></entry> + <entry>b<subscript>3</subscript></entry> + <entry>b<subscript>2</subscript></entry> + <entry>b<subscript>1</subscript></entry> + <entry>b<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>0</entry> + <entry>0</entry> + <entry>0</entry> + <entry>0</entry> + <entry>r<subscript>3</subscript></entry> + <entry>r<subscript>2</subscript></entry> + <entry>r<subscript>1</subscript></entry> + <entry>r<subscript>0</subscript></entry> + </row> + <row id="V4L2-MBUS-FMT-RGB555-2X8-PADHI-BE"> + <entry>V4L2_MBUS_FMT_RGB555_2X8_PADHI_BE</entry> + <entry>0x1003</entry> + <entry></entry> + <entry>0</entry> + <entry>r<subscript>4</subscript></entry> + <entry>r<subscript>3</subscript></entry> + <entry>r<subscript>2</subscript></entry> + <entry>r<subscript>1</subscript></entry> + <entry>r<subscript>0</subscript></entry> + <entry>g<subscript>4</subscript></entry> + <entry>g<subscript>3</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>g<subscript>2</subscript></entry> + <entry>g<subscript>1</subscript></entry> + <entry>g<subscript>0</subscript></entry> + <entry>b<subscript>4</subscript></entry> + <entry>b<subscript>3</subscript></entry> + <entry>b<subscript>2</subscript></entry> + <entry>b<subscript>1</subscript></entry> + <entry>b<subscript>0</subscript></entry> + </row> + <row id="V4L2-MBUS-FMT-RGB555-2X8-PADHI-LE"> + <entry>V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE</entry> + <entry>0x1004</entry> + <entry></entry> + <entry>g<subscript>2</subscript></entry> + <entry>g<subscript>1</subscript></entry> + <entry>g<subscript>0</subscript></entry> + <entry>b<subscript>4</subscript></entry> + <entry>b<subscript>3</subscript></entry> + <entry>b<subscript>2</subscript></entry> + <entry>b<subscript>1</subscript></entry> + <entry>b<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>0</entry> + <entry>r<subscript>4</subscript></entry> + <entry>r<subscript>3</subscript></entry> + <entry>r<subscript>2</subscript></entry> + <entry>r<subscript>1</subscript></entry> + <entry>r<subscript>0</subscript></entry> + <entry>g<subscript>4</subscript></entry> + <entry>g<subscript>3</subscript></entry> + </row> + <row id="V4L2-MBUS-FMT-BGR565-2X8-BE"> + <entry>V4L2_MBUS_FMT_BGR565_2X8_BE</entry> + <entry>0x1005</entry> + <entry></entry> + <entry>b<subscript>4</subscript></entry> + <entry>b<subscript>3</subscript></entry> + <entry>b<subscript>2</subscript></entry> + <entry>b<subscript>1</subscript></entry> + <entry>b<subscript>0</subscript></entry> + <entry>g<subscript>5</subscript></entry> + <entry>g<subscript>4</subscript></entry> + <entry>g<subscript>3</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>g<subscript>2</subscript></entry> + <entry>g<subscript>1</subscript></entry> + <entry>g<subscript>0</subscript></entry> + <entry>r<subscript>4</subscript></entry> + <entry>r<subscript>3</subscript></entry> + <entry>r<subscript>2</subscript></entry> + <entry>r<subscript>1</subscript></entry> + <entry>r<subscript>0</subscript></entry> + </row> + <row id="V4L2-MBUS-FMT-BGR565-2X8-LE"> + <entry>V4L2_MBUS_FMT_BGR565_2X8_LE</entry> + <entry>0x1006</entry> + <entry></entry> + <entry>g<subscript>2</subscript></entry> + <entry>g<subscript>1</subscript></entry> + <entry>g<subscript>0</subscript></entry> + <entry>r<subscript>4</subscript></entry> + <entry>r<subscript>3</subscript></entry> + <entry>r<subscript>2</subscript></entry> + <entry>r<subscript>1</subscript></entry> + <entry>r<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>b<subscript>4</subscript></entry> + <entry>b<subscript>3</subscript></entry> + <entry>b<subscript>2</subscript></entry> + <entry>b<subscript>1</subscript></entry> + <entry>b<subscript>0</subscript></entry> + <entry>g<subscript>5</subscript></entry> + <entry>g<subscript>4</subscript></entry> + <entry>g<subscript>3</subscript></entry> + </row> + <row id="V4L2-MBUS-FMT-RGB565-2X8-BE"> + <entry>V4L2_MBUS_FMT_RGB565_2X8_BE</entry> + <entry>0x1007</entry> + <entry></entry> + <entry>r<subscript>4</subscript></entry> + <entry>r<subscript>3</subscript></entry> + <entry>r<subscript>2</subscript></entry> + <entry>r<subscript>1</subscript></entry> + <entry>r<subscript>0</subscript></entry> + <entry>g<subscript>5</subscript></entry> + <entry>g<subscript>4</subscript></entry> + <entry>g<subscript>3</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>g<subscript>2</subscript></entry> + <entry>g<subscript>1</subscript></entry> + <entry>g<subscript>0</subscript></entry> + <entry>b<subscript>4</subscript></entry> + <entry>b<subscript>3</subscript></entry> + <entry>b<subscript>2</subscript></entry> + <entry>b<subscript>1</subscript></entry> + <entry>b<subscript>0</subscript></entry> + </row> + <row id="V4L2-MBUS-FMT-RGB565-2X8-LE"> + <entry>V4L2_MBUS_FMT_RGB565_2X8_LE</entry> + <entry>0x1008</entry> + <entry></entry> + <entry>g<subscript>2</subscript></entry> + <entry>g<subscript>1</subscript></entry> + <entry>g<subscript>0</subscript></entry> + <entry>b<subscript>4</subscript></entry> + <entry>b<subscript>3</subscript></entry> + <entry>b<subscript>2</subscript></entry> + <entry>b<subscript>1</subscript></entry> + <entry>b<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>r<subscript>4</subscript></entry> + <entry>r<subscript>3</subscript></entry> + <entry>r<subscript>2</subscript></entry> + <entry>r<subscript>1</subscript></entry> + <entry>r<subscript>0</subscript></entry> + <entry>g<subscript>5</subscript></entry> + <entry>g<subscript>4</subscript></entry> + <entry>g<subscript>3</subscript></entry> + </row> + </tbody> + </tgroup> + </table> + </section> + + <section> + <title>Bayer Formats</title> + + <para>Those formats transfer pixel data as red, green and blue components. + The format code is made of the following information. + <itemizedlist> + <listitem><para>The red, green and blue components order code, as encoded in a + pixel sample. The possible values are shown in <xref + linkend="bayer-patterns" />.</para></listitem> + <listitem><para>The number of bits per pixel component. All components are + transferred on the same number of bits. Common values are 8, 10 and 12.</para> + </listitem> + <listitem><para>If the pixel components are DPCM-compressed, a mention of the + DPCM compression and the number of bits per compressed pixel component.</para> + </listitem> + <listitem><para>The number of bus samples per pixel. Pixels that are wider than + the bus width must be transferred in multiple samples. Common values are + 1 and 2.</para></listitem> + <listitem><para>The bus width.</para></listitem> + <listitem><para>For formats where the total number of bits per pixel is smaller + than the number of bus samples per pixel times the bus width, a padding + value stating if the bytes are padded in their most high order bits + (PADHI) or low order bits (PADLO).</para></listitem> + <listitem><para>For formats where the number of bus samples per pixel is larger + than 1, an endianness value stating if the pixel is transferred MSB first + (BE) or LSB first (LE).</para></listitem> + </itemizedlist> + </para> + + <para>For instance, a format with uncompressed 10-bit Bayer components + arranged in a red, green, green, blue pattern transferred as 2 8-bit + samples per pixel with the least significant bits transferred first will + be named <constant>V4L2_MBUS_FMT_SRGGB10_2X8_PADHI_LE</constant>. + </para> + + <figure id="bayer-patterns"> + <title>Bayer Patterns</title> + <mediaobject> + <imageobject> + <imagedata fileref="bayer.pdf" format="PS" /> + </imageobject> + <imageobject> + <imagedata fileref="bayer.png" format="PNG" /> + </imageobject> + <textobject> + <phrase>Bayer filter color patterns</phrase> + </textobject> + </mediaobject> + </figure> + + <para>The following table lists existing packet Bayer formats. The data + organization is given as an example for the first pixel only.</para> + + <table pgwide="0" frame="none" id="v4l2-mbus-pixelcode-bayer"> + <title>Bayer Formats</title> + <tgroup cols="15"> + <colspec colname="id" align="left" /> + <colspec colname="code" align="center"/> + <colspec colname="bit" /> + <colspec colnum="4" colname="b11" align="center" /> + <colspec colnum="5" colname="b10" align="center" /> + <colspec colnum="6" colname="b09" align="center" /> + <colspec colnum="7" colname="b08" align="center" /> + <colspec colnum="8" colname="b07" align="center" /> + <colspec colnum="9" colname="b06" align="center" /> + <colspec colnum="10" colname="b05" align="center" /> + <colspec colnum="11" colname="b04" align="center" /> + <colspec colnum="12" colname="b03" align="center" /> + <colspec colnum="13" colname="b02" align="center" /> + <colspec colnum="14" colname="b01" align="center" /> + <colspec colnum="15" colname="b00" align="center" /> + <spanspec namest="b11" nameend="b00" spanname="b0" /> + <thead> + <row> + <entry>Identifier</entry> + <entry>Code</entry> + <entry></entry> + <entry spanname="b0">Data organization</entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry>Bit</entry> + <entry>11</entry> + <entry>10</entry> + <entry>9</entry> + <entry>8</entry> + <entry>7</entry> + <entry>6</entry> + <entry>5</entry> + <entry>4</entry> + <entry>3</entry> + <entry>2</entry> + <entry>1</entry> + <entry>0</entry> + </row> + </thead> + <tbody valign="top"> + <row id="V4L2-MBUS-FMT-SBGGR8-1X8"> + <entry>V4L2_MBUS_FMT_SBGGR8_1X8</entry> + <entry>0x3001</entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>b<subscript>7</subscript></entry> + <entry>b<subscript>6</subscript></entry> + <entry>b<subscript>5</subscript></entry> + <entry>b<subscript>4</subscript></entry> + <entry>b<subscript>3</subscript></entry> + <entry>b<subscript>2</subscript></entry> + <entry>b<subscript>1</subscript></entry> + <entry>b<subscript>0</subscript></entry> + </row> + <row id="V4L2-MBUS-FMT-SGBRG8-1X8"> + <entry>V4L2_MBUS_FMT_SGBRG8_1X8</entry> + <entry>0x3013</entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>g<subscript>7</subscript></entry> + <entry>g<subscript>6</subscript></entry> + <entry>g<subscript>5</subscript></entry> + <entry>g<subscript>4</subscript></entry> + <entry>g<subscript>3</subscript></entry> + <entry>g<subscript>2</subscript></entry> + <entry>g<subscript>1</subscript></entry> + <entry>g<subscript>0</subscript></entry> + </row> + <row id="V4L2-MBUS-FMT-SGRBG8-1X8"> + <entry>V4L2_MBUS_FMT_SGRBG8_1X8</entry> + <entry>0x3002</entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>g<subscript>7</subscript></entry> + <entry>g<subscript>6</subscript></entry> + <entry>g<subscript>5</subscript></entry> + <entry>g<subscript>4</subscript></entry> + <entry>g<subscript>3</subscript></entry> + <entry>g<subscript>2</subscript></entry> + <entry>g<subscript>1</subscript></entry> + <entry>g<subscript>0</subscript></entry> + </row> + <row id="V4L2-MBUS-FMT-SRGGB8-1X8"> + <entry>V4L2_MBUS_FMT_SRGGB8_1X8</entry> + <entry>0x3014</entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>r<subscript>7</subscript></entry> + <entry>r<subscript>6</subscript></entry> + <entry>r<subscript>5</subscript></entry> + <entry>r<subscript>4</subscript></entry> + <entry>r<subscript>3</subscript></entry> + <entry>r<subscript>2</subscript></entry> + <entry>r<subscript>1</subscript></entry> + <entry>r<subscript>0</subscript></entry> + </row> + <row id="V4L2-MBUS-FMT-SBGGR10-DPCM8-1X8"> + <entry>V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8</entry> + <entry>0x300b</entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>b<subscript>7</subscript></entry> + <entry>b<subscript>6</subscript></entry> + <entry>b<subscript>5</subscript></entry> + <entry>b<subscript>4</subscript></entry> + <entry>b<subscript>3</subscript></entry> + <entry>b<subscript>2</subscript></entry> + <entry>b<subscript>1</subscript></entry> + <entry>b<subscript>0</subscript></entry> + </row> + <row id="V4L2-MBUS-FMT-SGBRG10-DPCM8-1X8"> + <entry>V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8</entry> + <entry>0x300c</entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>g<subscript>7</subscript></entry> + <entry>g<subscript>6</subscript></entry> + <entry>g<subscript>5</subscript></entry> + <entry>g<subscript>4</subscript></entry> + <entry>g<subscript>3</subscript></entry> + <entry>g<subscript>2</subscript></entry> + <entry>g<subscript>1</subscript></entry> + <entry>g<subscript>0</subscript></entry> + </row> + <row id="V4L2-MBUS-FMT-SGRBG10-DPCM8-1X8"> + <entry>V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8</entry> + <entry>0x3009</entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>g<subscript>7</subscript></entry> + <entry>g<subscript>6</subscript></entry> + <entry>g<subscript>5</subscript></entry> + <entry>g<subscript>4</subscript></entry> + <entry>g<subscript>3</subscript></entry> + <entry>g<subscript>2</subscript></entry> + <entry>g<subscript>1</subscript></entry> + <entry>g<subscript>0</subscript></entry> + </row> + <row id="V4L2-MBUS-FMT-SRGGB10-DPCM8-1X8"> + <entry>V4L2_MBUS_FMT_SRGGB10_DPCM8_1X8</entry> + <entry>0x300d</entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>r<subscript>7</subscript></entry> + <entry>r<subscript>6</subscript></entry> + <entry>r<subscript>5</subscript></entry> + <entry>r<subscript>4</subscript></entry> + <entry>r<subscript>3</subscript></entry> + <entry>r<subscript>2</subscript></entry> + <entry>r<subscript>1</subscript></entry> + <entry>r<subscript>0</subscript></entry> + </row> + <row id="V4L2-MBUS-FMT-SBGGR10-2X8-PADHI-BE"> + <entry>V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_BE</entry> + <entry>0x3003</entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>0</entry> + <entry>0</entry> + <entry>0</entry> + <entry>0</entry> + <entry>0</entry> + <entry>0</entry> + <entry>b<subscript>9</subscript></entry> + <entry>b<subscript>8</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>b<subscript>7</subscript></entry> + <entry>b<subscript>6</subscript></entry> + <entry>b<subscript>5</subscript></entry> + <entry>b<subscript>4</subscript></entry> + <entry>b<subscript>3</subscript></entry> + <entry>b<subscript>2</subscript></entry> + <entry>b<subscript>1</subscript></entry> + <entry>b<subscript>0</subscript></entry> + </row> + <row id="V4L2-MBUS-FMT-SBGGR10-2X8-PADHI-LE"> + <entry>V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_LE</entry> + <entry>0x3004</entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>b<subscript>7</subscript></entry> + <entry>b<subscript>6</subscript></entry> + <entry>b<subscript>5</subscript></entry> + <entry>b<subscript>4</subscript></entry> + <entry>b<subscript>3</subscript></entry> + <entry>b<subscript>2</subscript></entry> + <entry>b<subscript>1</subscript></entry> + <entry>b<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>0</entry> + <entry>0</entry> + <entry>0</entry> + <entry>0</entry> + <entry>0</entry> + <entry>0</entry> + <entry>b<subscript>9</subscript></entry> + <entry>b<subscript>8</subscript></entry> + </row> + <row id="V4L2-MBUS-FMT-SBGGR10-2X8-PADLO-BE"> + <entry>V4L2_MBUS_FMT_SBGGR10_2X8_PADLO_BE</entry> + <entry>0x3005</entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>b<subscript>9</subscript></entry> + <entry>b<subscript>8</subscript></entry> + <entry>b<subscript>7</subscript></entry> + <entry>b<subscript>6</subscript></entry> + <entry>b<subscript>5</subscript></entry> + <entry>b<subscript>4</subscript></entry> + <entry>b<subscript>3</subscript></entry> + <entry>b<subscript>2</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>b<subscript>1</subscript></entry> + <entry>b<subscript>0</subscript></entry> + <entry>0</entry> + <entry>0</entry> + <entry>0</entry> + <entry>0</entry> + <entry>0</entry> + <entry>0</entry> + </row> + <row id="V4L2-MBUS-FMT-SBGGR10-2X8-PADLO-LE"> + <entry>V4L2_MBUS_FMT_SBGGR10_2X8_PADLO_LE</entry> + <entry>0x3006</entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>b<subscript>1</subscript></entry> + <entry>b<subscript>0</subscript></entry> + <entry>0</entry> + <entry>0</entry> + <entry>0</entry> + <entry>0</entry> + <entry>0</entry> + <entry>0</entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>b<subscript>9</subscript></entry> + <entry>b<subscript>8</subscript></entry> + <entry>b<subscript>7</subscript></entry> + <entry>b<subscript>6</subscript></entry> + <entry>b<subscript>5</subscript></entry> + <entry>b<subscript>4</subscript></entry> + <entry>b<subscript>3</subscript></entry> + <entry>b<subscript>2</subscript></entry> + </row> + <row id="V4L2-MBUS-FMT-SBGGR10-1X10"> + <entry>V4L2_MBUS_FMT_SBGGR10_1X10</entry> + <entry>0x3007</entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>b<subscript>9</subscript></entry> + <entry>b<subscript>8</subscript></entry> + <entry>b<subscript>7</subscript></entry> + <entry>b<subscript>6</subscript></entry> + <entry>b<subscript>5</subscript></entry> + <entry>b<subscript>4</subscript></entry> + <entry>b<subscript>3</subscript></entry> + <entry>b<subscript>2</subscript></entry> + <entry>b<subscript>1</subscript></entry> + <entry>b<subscript>0</subscript></entry> + </row> + <row id="V4L2-MBUS-FMT-SGBRG10-1X10"> + <entry>V4L2_MBUS_FMT_SGBRG10_1X10</entry> + <entry>0x300e</entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>g<subscript>9</subscript></entry> + <entry>g<subscript>8</subscript></entry> + <entry>g<subscript>7</subscript></entry> + <entry>g<subscript>6</subscript></entry> + <entry>g<subscript>5</subscript></entry> + <entry>g<subscript>4</subscript></entry> + <entry>g<subscript>3</subscript></entry> + <entry>g<subscript>2</subscript></entry> + <entry>g<subscript>1</subscript></entry> + <entry>g<subscript>0</subscript></entry> + </row> + <row id="V4L2-MBUS-FMT-SGRBG10-1X10"> + <entry>V4L2_MBUS_FMT_SGRBG10_1X10</entry> + <entry>0x300a</entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>g<subscript>9</subscript></entry> + <entry>g<subscript>8</subscript></entry> + <entry>g<subscript>7</subscript></entry> + <entry>g<subscript>6</subscript></entry> + <entry>g<subscript>5</subscript></entry> + <entry>g<subscript>4</subscript></entry> + <entry>g<subscript>3</subscript></entry> + <entry>g<subscript>2</subscript></entry> + <entry>g<subscript>1</subscript></entry> + <entry>g<subscript>0</subscript></entry> + </row> + <row id="V4L2-MBUS-FMT-SRGGB10-1X10"> + <entry>V4L2_MBUS_FMT_SRGGB10_1X10</entry> + <entry>0x300f</entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>r<subscript>9</subscript></entry> + <entry>r<subscript>8</subscript></entry> + <entry>r<subscript>7</subscript></entry> + <entry>r<subscript>6</subscript></entry> + <entry>r<subscript>5</subscript></entry> + <entry>r<subscript>4</subscript></entry> + <entry>r<subscript>3</subscript></entry> + <entry>r<subscript>2</subscript></entry> + <entry>r<subscript>1</subscript></entry> + <entry>r<subscript>0</subscript></entry> + </row> + <row id="V4L2-MBUS-FMT-SBGGR12-1X12"> + <entry>V4L2_MBUS_FMT_SBGGR12_1X12</entry> + <entry>0x3008</entry> + <entry></entry> + <entry>b<subscript>11</subscript></entry> + <entry>b<subscript>10</subscript></entry> + <entry>b<subscript>9</subscript></entry> + <entry>b<subscript>8</subscript></entry> + <entry>b<subscript>7</subscript></entry> + <entry>b<subscript>6</subscript></entry> + <entry>b<subscript>5</subscript></entry> + <entry>b<subscript>4</subscript></entry> + <entry>b<subscript>3</subscript></entry> + <entry>b<subscript>2</subscript></entry> + <entry>b<subscript>1</subscript></entry> + <entry>b<subscript>0</subscript></entry> + </row> + <row id="V4L2-MBUS-FMT-SGBRG12-1X12"> + <entry>V4L2_MBUS_FMT_SGBRG12_1X12</entry> + <entry>0x3010</entry> + <entry></entry> + <entry>g<subscript>11</subscript></entry> + <entry>g<subscript>10</subscript></entry> + <entry>g<subscript>9</subscript></entry> + <entry>g<subscript>8</subscript></entry> + <entry>g<subscript>7</subscript></entry> + <entry>g<subscript>6</subscript></entry> + <entry>g<subscript>5</subscript></entry> + <entry>g<subscript>4</subscript></entry> + <entry>g<subscript>3</subscript></entry> + <entry>g<subscript>2</subscript></entry> + <entry>g<subscript>1</subscript></entry> + <entry>g<subscript>0</subscript></entry> + </row> + <row id="V4L2-MBUS-FMT-SGRBG12-1X12"> + <entry>V4L2_MBUS_FMT_SGRBG12_1X12</entry> + <entry>0x3011</entry> + <entry></entry> + <entry>g<subscript>11</subscript></entry> + <entry>g<subscript>10</subscript></entry> + <entry>g<subscript>9</subscript></entry> + <entry>g<subscript>8</subscript></entry> + <entry>g<subscript>7</subscript></entry> + <entry>g<subscript>6</subscript></entry> + <entry>g<subscript>5</subscript></entry> + <entry>g<subscript>4</subscript></entry> + <entry>g<subscript>3</subscript></entry> + <entry>g<subscript>2</subscript></entry> + <entry>g<subscript>1</subscript></entry> + <entry>g<subscript>0</subscript></entry> + </row> + <row id="V4L2-MBUS-FMT-SRGGB12-1X12"> + <entry>V4L2_MBUS_FMT_SRGGB12_1X12</entry> + <entry>0x3012</entry> + <entry></entry> + <entry>r<subscript>11</subscript></entry> + <entry>r<subscript>10</subscript></entry> + <entry>r<subscript>9</subscript></entry> + <entry>r<subscript>8</subscript></entry> + <entry>r<subscript>7</subscript></entry> + <entry>r<subscript>6</subscript></entry> + <entry>r<subscript>5</subscript></entry> + <entry>r<subscript>4</subscript></entry> + <entry>r<subscript>3</subscript></entry> + <entry>r<subscript>2</subscript></entry> + <entry>r<subscript>1</subscript></entry> + <entry>r<subscript>0</subscript></entry> + </row> + </tbody> + </tgroup> + </table> + </section> + + <section> + <title>Packed YUV Formats</title> + + <para>Those data formats transfer pixel data as (possibly downsampled) Y, U + and V components. The format code is made of the following information. + <itemizedlist> + <listitem><para>The Y, U and V components order code, as transferred on the + bus. Possible values are YUYV, UYVY, YVYU and VYUY.</para></listitem> + <listitem><para>The number of bits per pixel component. All components are + transferred on the same number of bits. Common values are 8, 10 and 12.</para> + </listitem> + <listitem><para>The number of bus samples per pixel. Pixels that are wider than + the bus width must be transferred in multiple samples. Common values are + 1, 1.5 (encoded as 1_5) and 2.</para></listitem> + <listitem><para>The bus width. When the bus width is larger than the number of + bits per pixel component, several components are packed in a single bus + sample. The components are ordered as specified by the order code, with + components on the left of the code transferred in the high order bits. + Common values are 8 and 16.</para> + </listitem> + </itemizedlist> + </para> + + <para>For instance, a format where pixels are encoded as 8-bit YUV values + downsampled to 4:2:2 and transferred as 2 8-bit bus samples per pixel in the + U, Y, V, Y order will be named <constant>V4L2_MBUS_FMT_UYVY8_2X8</constant>. + </para> + + <para>The following table lisst existing packet YUV formats.</para> + + <table pgwide="0" frame="none" id="v4l2-mbus-pixelcode-yuv8"> + <title>YUV Formats</title> + <tgroup cols="23"> + <colspec colname="id" align="left" /> + <colspec colname="code" align="center"/> + <colspec colname="bit" /> + <colspec colnum="4" colname="b19" align="center" /> + <colspec colnum="5" colname="b18" align="center" /> + <colspec colnum="6" colname="b17" align="center" /> + <colspec colnum="7" colname="b16" align="center" /> + <colspec colnum="8" colname="b15" align="center" /> + <colspec colnum="9" colname="b14" align="center" /> + <colspec colnum="10" colname="b13" align="center" /> + <colspec colnum="11" colname="b12" align="center" /> + <colspec colnum="12" colname="b11" align="center" /> + <colspec colnum="13" colname="b10" align="center" /> + <colspec colnum="14" colname="b09" align="center" /> + <colspec colnum="15" colname="b08" align="center" /> + <colspec colnum="16" colname="b07" align="center" /> + <colspec colnum="17" colname="b06" align="center" /> + <colspec colnum="18" colname="b05" align="center" /> + <colspec colnum="19" colname="b04" align="center" /> + <colspec colnum="20" colname="b03" align="center" /> + <colspec colnum="21" colname="b02" align="center" /> + <colspec colnum="22" colname="b01" align="center" /> + <colspec colnum="23" colname="b00" align="center" /> + <spanspec namest="b19" nameend="b00" spanname="b0" /> + <thead> + <row> + <entry>Identifier</entry> + <entry>Code</entry> + <entry></entry> + <entry spanname="b0">Data organization</entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry>Bit</entry> + <entry>19</entry> + <entry>18</entry> + <entry>17</entry> + <entry>16</entry> + <entry>15</entry> + <entry>14</entry> + <entry>13</entry> + <entry>12</entry> + <entry>11</entry> + <entry>10</entry> + <entry>9</entry> + <entry>8</entry> + <entry>7</entry> + <entry>6</entry> + <entry>5</entry> + <entry>4</entry> + <entry>3</entry> + <entry>2</entry> + <entry>1</entry> + <entry>0</entry> + </row> + </thead> + <tbody valign="top"> + <row id="V4L2-MBUS-FMT-Y8-1X8"> + <entry>V4L2_MBUS_FMT_Y8_1X8</entry> + <entry>0x2001</entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>y<subscript>7</subscript></entry> + <entry>y<subscript>6</subscript></entry> + <entry>y<subscript>5</subscript></entry> + <entry>y<subscript>4</subscript></entry> + <entry>y<subscript>3</subscript></entry> + <entry>y<subscript>2</subscript></entry> + <entry>y<subscript>1</subscript></entry> + <entry>y<subscript>0</subscript></entry> + </row> + <row id="V4L2-MBUS-FMT-UYVY8-1_5X8"> + <entry>V4L2_MBUS_FMT_UYVY8_1_5X8</entry> + <entry>0x2002</entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>u<subscript>7</subscript></entry> + <entry>u<subscript>6</subscript></entry> + <entry>u<subscript>5</subscript></entry> + <entry>u<subscript>4</subscript></entry> + <entry>u<subscript>3</subscript></entry> + <entry>u<subscript>2</subscript></entry> + <entry>u<subscript>1</subscript></entry> + <entry>u<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>y<subscript>7</subscript></entry> + <entry>y<subscript>6</subscript></entry> + <entry>y<subscript>5</subscript></entry> + <entry>y<subscript>4</subscript></entry> + <entry>y<subscript>3</subscript></entry> + <entry>y<subscript>2</subscript></entry> + <entry>y<subscript>1</subscript></entry> + <entry>y<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>y<subscript>7</subscript></entry> + <entry>y<subscript>6</subscript></entry> + <entry>y<subscript>5</subscript></entry> + <entry>y<subscript>4</subscript></entry> + <entry>y<subscript>3</subscript></entry> + <entry>y<subscript>2</subscript></entry> + <entry>y<subscript>1</subscript></entry> + <entry>y<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>v<subscript>7</subscript></entry> + <entry>v<subscript>6</subscript></entry> + <entry>v<subscript>5</subscript></entry> + <entry>v<subscript>4</subscript></entry> + <entry>v<subscript>3</subscript></entry> + <entry>v<subscript>2</subscript></entry> + <entry>v<subscript>1</subscript></entry> + <entry>v<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>y<subscript>7</subscript></entry> + <entry>y<subscript>6</subscript></entry> + <entry>y<subscript>5</subscript></entry> + <entry>y<subscript>4</subscript></entry> + <entry>y<subscript>3</subscript></entry> + <entry>y<subscript>2</subscript></entry> + <entry>y<subscript>1</subscript></entry> + <entry>y<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>y<subscript>7</subscript></entry> + <entry>y<subscript>6</subscript></entry> + <entry>y<subscript>5</subscript></entry> + <entry>y<subscript>4</subscript></entry> + <entry>y<subscript>3</subscript></entry> + <entry>y<subscript>2</subscript></entry> + <entry>y<subscript>1</subscript></entry> + <entry>y<subscript>0</subscript></entry> + </row> + <row id="V4L2-MBUS-FMT-VYUY8-1_5X8"> + <entry>V4L2_MBUS_FMT_VYUY8_1_5X8</entry> + <entry>0x2003</entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>v<subscript>7</subscript></entry> + <entry>v<subscript>6</subscript></entry> + <entry>v<subscript>5</subscript></entry> + <entry>v<subscript>4</subscript></entry> + <entry>v<subscript>3</subscript></entry> + <entry>v<subscript>2</subscript></entry> + <entry>v<subscript>1</subscript></entry> + <entry>v<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>y<subscript>7</subscript></entry> + <entry>y<subscript>6</subscript></entry> + <entry>y<subscript>5</subscript></entry> + <entry>y<subscript>4</subscript></entry> + <entry>y<subscript>3</subscript></entry> + <entry>y<subscript>2</subscript></entry> + <entry>y<subscript>1</subscript></entry> + <entry>y<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>y<subscript>7</subscript></entry> + <entry>y<subscript>6</subscript></entry> + <entry>y<subscript>5</subscript></entry> + <entry>y<subscript>4</subscript></entry> + <entry>y<subscript>3</subscript></entry> + <entry>y<subscript>2</subscript></entry> + <entry>y<subscript>1</subscript></entry> + <entry>y<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>u<subscript>7</subscript></entry> + <entry>u<subscript>6</subscript></entry> + <entry>u<subscript>5</subscript></entry> + <entry>u<subscript>4</subscript></entry> + <entry>u<subscript>3</subscript></entry> + <entry>u<subscript>2</subscript></entry> + <entry>u<subscript>1</subscript></entry> + <entry>u<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>y<subscript>7</subscript></entry> + <entry>y<subscript>6</subscript></entry> + <entry>y<subscript>5</subscript></entry> + <entry>y<subscript>4</subscript></entry> + <entry>y<subscript>3</subscript></entry> + <entry>y<subscript>2</subscript></entry> + <entry>y<subscript>1</subscript></entry> + <entry>y<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>y<subscript>7</subscript></entry> + <entry>y<subscript>6</subscript></entry> + <entry>y<subscript>5</subscript></entry> + <entry>y<subscript>4</subscript></entry> + <entry>y<subscript>3</subscript></entry> + <entry>y<subscript>2</subscript></entry> + <entry>y<subscript>1</subscript></entry> + <entry>y<subscript>0</subscript></entry> + </row> + <row id="V4L2-MBUS-FMT-YUYV8-1_5X8"> + <entry>V4L2_MBUS_FMT_YUYV8_1_5X8</entry> + <entry>0x2004</entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>y<subscript>7</subscript></entry> + <entry>y<subscript>6</subscript></entry> + <entry>y<subscript>5</subscript></entry> + <entry>y<subscript>4</subscript></entry> + <entry>y<subscript>3</subscript></entry> + <entry>y<subscript>2</subscript></entry> + <entry>y<subscript>1</subscript></entry> + <entry>y<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>y<subscript>7</subscript></entry> + <entry>y<subscript>6</subscript></entry> + <entry>y<subscript>5</subscript></entry> + <entry>y<subscript>4</subscript></entry> + <entry>y<subscript>3</subscript></entry> + <entry>y<subscript>2</subscript></entry> + <entry>y<subscript>1</subscript></entry> + <entry>y<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>u<subscript>7</subscript></entry> + <entry>u<subscript>6</subscript></entry> + <entry>u<subscript>5</subscript></entry> + <entry>u<subscript>4</subscript></entry> + <entry>u<subscript>3</subscript></entry> + <entry>u<subscript>2</subscript></entry> + <entry>u<subscript>1</subscript></entry> + <entry>u<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>y<subscript>7</subscript></entry> + <entry>y<subscript>6</subscript></entry> + <entry>y<subscript>5</subscript></entry> + <entry>y<subscript>4</subscript></entry> + <entry>y<subscript>3</subscript></entry> + <entry>y<subscript>2</subscript></entry> + <entry>y<subscript>1</subscript></entry> + <entry>y<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>y<subscript>7</subscript></entry> + <entry>y<subscript>6</subscript></entry> + <entry>y<subscript>5</subscript></entry> + <entry>y<subscript>4</subscript></entry> + <entry>y<subscript>3</subscript></entry> + <entry>y<subscript>2</subscript></entry> + <entry>y<subscript>1</subscript></entry> + <entry>y<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>v<subscript>7</subscript></entry> + <entry>v<subscript>6</subscript></entry> + <entry>v<subscript>5</subscript></entry> + <entry>v<subscript>4</subscript></entry> + <entry>v<subscript>3</subscript></entry> + <entry>v<subscript>2</subscript></entry> + <entry>v<subscript>1</subscript></entry> + <entry>v<subscript>0</subscript></entry> + </row> + <row id="V4L2-MBUS-FMT-YVYU8-1_5X8"> + <entry>V4L2_MBUS_FMT_YVYU8_1_5X8</entry> + <entry>0x2005</entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>y<subscript>7</subscript></entry> + <entry>y<subscript>6</subscript></entry> + <entry>y<subscript>5</subscript></entry> + <entry>y<subscript>4</subscript></entry> + <entry>y<subscript>3</subscript></entry> + <entry>y<subscript>2</subscript></entry> + <entry>y<subscript>1</subscript></entry> + <entry>y<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>y<subscript>7</subscript></entry> + <entry>y<subscript>6</subscript></entry> + <entry>y<subscript>5</subscript></entry> + <entry>y<subscript>4</subscript></entry> + <entry>y<subscript>3</subscript></entry> + <entry>y<subscript>2</subscript></entry> + <entry>y<subscript>1</subscript></entry> + <entry>y<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>v<subscript>7</subscript></entry> + <entry>v<subscript>6</subscript></entry> + <entry>v<subscript>5</subscript></entry> + <entry>v<subscript>4</subscript></entry> + <entry>v<subscript>3</subscript></entry> + <entry>v<subscript>2</subscript></entry> + <entry>v<subscript>1</subscript></entry> + <entry>v<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>y<subscript>7</subscript></entry> + <entry>y<subscript>6</subscript></entry> + <entry>y<subscript>5</subscript></entry> + <entry>y<subscript>4</subscript></entry> + <entry>y<subscript>3</subscript></entry> + <entry>y<subscript>2</subscript></entry> + <entry>y<subscript>1</subscript></entry> + <entry>y<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>y<subscript>7</subscript></entry> + <entry>y<subscript>6</subscript></entry> + <entry>y<subscript>5</subscript></entry> + <entry>y<subscript>4</subscript></entry> + <entry>y<subscript>3</subscript></entry> + <entry>y<subscript>2</subscript></entry> + <entry>y<subscript>1</subscript></entry> + <entry>y<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>u<subscript>7</subscript></entry> + <entry>u<subscript>6</subscript></entry> + <entry>u<subscript>5</subscript></entry> + <entry>u<subscript>4</subscript></entry> + <entry>u<subscript>3</subscript></entry> + <entry>u<subscript>2</subscript></entry> + <entry>u<subscript>1</subscript></entry> + <entry>u<subscript>0</subscript></entry> + </row> + <row id="V4L2-MBUS-FMT-UYVY8-2X8"> + <entry>V4L2_MBUS_FMT_UYVY8_2X8</entry> + <entry>0x2006</entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>u<subscript>7</subscript></entry> + <entry>u<subscript>6</subscript></entry> + <entry>u<subscript>5</subscript></entry> + <entry>u<subscript>4</subscript></entry> + <entry>u<subscript>3</subscript></entry> + <entry>u<subscript>2</subscript></entry> + <entry>u<subscript>1</subscript></entry> + <entry>u<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>y<subscript>7</subscript></entry> + <entry>y<subscript>6</subscript></entry> + <entry>y<subscript>5</subscript></entry> + <entry>y<subscript>4</subscript></entry> + <entry>y<subscript>3</subscript></entry> + <entry>y<subscript>2</subscript></entry> + <entry>y<subscript>1</subscript></entry> + <entry>y<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>v<subscript>7</subscript></entry> + <entry>v<subscript>6</subscript></entry> + <entry>v<subscript>5</subscript></entry> + <entry>v<subscript>4</subscript></entry> + <entry>v<subscript>3</subscript></entry> + <entry>v<subscript>2</subscript></entry> + <entry>v<subscript>1</subscript></entry> + <entry>v<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>y<subscript>7</subscript></entry> + <entry>y<subscript>6</subscript></entry> + <entry>y<subscript>5</subscript></entry> + <entry>y<subscript>4</subscript></entry> + <entry>y<subscript>3</subscript></entry> + <entry>y<subscript>2</subscript></entry> + <entry>y<subscript>1</subscript></entry> + <entry>y<subscript>0</subscript></entry> + </row> + <row id="V4L2-MBUS-FMT-VYUY8-2X8"> + <entry>V4L2_MBUS_FMT_VYUY8_2X8</entry> + <entry>0x2007</entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>v<subscript>7</subscript></entry> + <entry>v<subscript>6</subscript></entry> + <entry>v<subscript>5</subscript></entry> + <entry>v<subscript>4</subscript></entry> + <entry>v<subscript>3</subscript></entry> + <entry>v<subscript>2</subscript></entry> + <entry>v<subscript>1</subscript></entry> + <entry>v<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>y<subscript>7</subscript></entry> + <entry>y<subscript>6</subscript></entry> + <entry>y<subscript>5</subscript></entry> + <entry>y<subscript>4</subscript></entry> + <entry>y<subscript>3</subscript></entry> + <entry>y<subscript>2</subscript></entry> + <entry>y<subscript>1</subscript></entry> + <entry>y<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>u<subscript>7</subscript></entry> + <entry>u<subscript>6</subscript></entry> + <entry>u<subscript>5</subscript></entry> + <entry>u<subscript>4</subscript></entry> + <entry>u<subscript>3</subscript></entry> + <entry>u<subscript>2</subscript></entry> + <entry>u<subscript>1</subscript></entry> + <entry>u<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>y<subscript>7</subscript></entry> + <entry>y<subscript>6</subscript></entry> + <entry>y<subscript>5</subscript></entry> + <entry>y<subscript>4</subscript></entry> + <entry>y<subscript>3</subscript></entry> + <entry>y<subscript>2</subscript></entry> + <entry>y<subscript>1</subscript></entry> + <entry>y<subscript>0</subscript></entry> + </row> + <row id="V4L2-MBUS-FMT-YUYV8-2X8"> + <entry>V4L2_MBUS_FMT_YUYV8_2X8</entry> + <entry>0x2008</entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>y<subscript>7</subscript></entry> + <entry>y<subscript>6</subscript></entry> + <entry>y<subscript>5</subscript></entry> + <entry>y<subscript>4</subscript></entry> + <entry>y<subscript>3</subscript></entry> + <entry>y<subscript>2</subscript></entry> + <entry>y<subscript>1</subscript></entry> + <entry>y<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>u<subscript>7</subscript></entry> + <entry>u<subscript>6</subscript></entry> + <entry>u<subscript>5</subscript></entry> + <entry>u<subscript>4</subscript></entry> + <entry>u<subscript>3</subscript></entry> + <entry>u<subscript>2</subscript></entry> + <entry>u<subscript>1</subscript></entry> + <entry>u<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>y<subscript>7</subscript></entry> + <entry>y<subscript>6</subscript></entry> + <entry>y<subscript>5</subscript></entry> + <entry>y<subscript>4</subscript></entry> + <entry>y<subscript>3</subscript></entry> + <entry>y<subscript>2</subscript></entry> + <entry>y<subscript>1</subscript></entry> + <entry>y<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>v<subscript>7</subscript></entry> + <entry>v<subscript>6</subscript></entry> + <entry>v<subscript>5</subscript></entry> + <entry>v<subscript>4</subscript></entry> + <entry>v<subscript>3</subscript></entry> + <entry>v<subscript>2</subscript></entry> + <entry>v<subscript>1</subscript></entry> + <entry>v<subscript>0</subscript></entry> + </row> + <row id="V4L2-MBUS-FMT-YVYU8-2X8"> + <entry>V4L2_MBUS_FMT_YVYU8_2X8</entry> + <entry>0x2009</entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>y<subscript>7</subscript></entry> + <entry>y<subscript>6</subscript></entry> + <entry>y<subscript>5</subscript></entry> + <entry>y<subscript>4</subscript></entry> + <entry>y<subscript>3</subscript></entry> + <entry>y<subscript>2</subscript></entry> + <entry>y<subscript>1</subscript></entry> + <entry>y<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>v<subscript>7</subscript></entry> + <entry>v<subscript>6</subscript></entry> + <entry>v<subscript>5</subscript></entry> + <entry>v<subscript>4</subscript></entry> + <entry>v<subscript>3</subscript></entry> + <entry>v<subscript>2</subscript></entry> + <entry>v<subscript>1</subscript></entry> + <entry>v<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>y<subscript>7</subscript></entry> + <entry>y<subscript>6</subscript></entry> + <entry>y<subscript>5</subscript></entry> + <entry>y<subscript>4</subscript></entry> + <entry>y<subscript>3</subscript></entry> + <entry>y<subscript>2</subscript></entry> + <entry>y<subscript>1</subscript></entry> + <entry>y<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>u<subscript>7</subscript></entry> + <entry>u<subscript>6</subscript></entry> + <entry>u<subscript>5</subscript></entry> + <entry>u<subscript>4</subscript></entry> + <entry>u<subscript>3</subscript></entry> + <entry>u<subscript>2</subscript></entry> + <entry>u<subscript>1</subscript></entry> + <entry>u<subscript>0</subscript></entry> + </row> + <row id="V4L2-MBUS-FMT-Y10-1X10"> + <entry>V4L2_MBUS_FMT_Y10_1X10</entry> + <entry>0x200a</entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>y<subscript>9</subscript></entry> + <entry>y<subscript>8</subscript></entry> + <entry>y<subscript>7</subscript></entry> + <entry>y<subscript>6</subscript></entry> + <entry>y<subscript>5</subscript></entry> + <entry>y<subscript>4</subscript></entry> + <entry>y<subscript>3</subscript></entry> + <entry>y<subscript>2</subscript></entry> + <entry>y<subscript>1</subscript></entry> + <entry>y<subscript>0</subscript></entry> + </row> + <row id="V4L2-MBUS-FMT-YUYV10-2X10"> + <entry>V4L2_MBUS_FMT_YUYV10_2X10</entry> + <entry>0x200b</entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>y<subscript>9</subscript></entry> + <entry>y<subscript>8</subscript></entry> + <entry>y<subscript>7</subscript></entry> + <entry>y<subscript>6</subscript></entry> + <entry>y<subscript>5</subscript></entry> + <entry>y<subscript>4</subscript></entry> + <entry>y<subscript>3</subscript></entry> + <entry>y<subscript>2</subscript></entry> + <entry>y<subscript>1</subscript></entry> + <entry>y<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>u<subscript>9</subscript></entry> + <entry>u<subscript>8</subscript></entry> + <entry>u<subscript>7</subscript></entry> + <entry>u<subscript>6</subscript></entry> + <entry>u<subscript>5</subscript></entry> + <entry>u<subscript>4</subscript></entry> + <entry>u<subscript>3</subscript></entry> + <entry>u<subscript>2</subscript></entry> + <entry>u<subscript>1</subscript></entry> + <entry>u<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>y<subscript>9</subscript></entry> + <entry>y<subscript>8</subscript></entry> + <entry>y<subscript>7</subscript></entry> + <entry>y<subscript>6</subscript></entry> + <entry>y<subscript>5</subscript></entry> + <entry>y<subscript>4</subscript></entry> + <entry>y<subscript>3</subscript></entry> + <entry>y<subscript>2</subscript></entry> + <entry>y<subscript>1</subscript></entry> + <entry>y<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>v<subscript>9</subscript></entry> + <entry>v<subscript>8</subscript></entry> + <entry>v<subscript>7</subscript></entry> + <entry>v<subscript>6</subscript></entry> + <entry>v<subscript>5</subscript></entry> + <entry>v<subscript>4</subscript></entry> + <entry>v<subscript>3</subscript></entry> + <entry>v<subscript>2</subscript></entry> + <entry>v<subscript>1</subscript></entry> + <entry>v<subscript>0</subscript></entry> + </row> + <row id="V4L2-MBUS-FMT-YVYU10-2X10"> + <entry>V4L2_MBUS_FMT_YVYU10_2X10</entry> + <entry>0x200c</entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>y<subscript>9</subscript></entry> + <entry>y<subscript>8</subscript></entry> + <entry>y<subscript>7</subscript></entry> + <entry>y<subscript>6</subscript></entry> + <entry>y<subscript>5</subscript></entry> + <entry>y<subscript>4</subscript></entry> + <entry>y<subscript>3</subscript></entry> + <entry>y<subscript>2</subscript></entry> + <entry>y<subscript>1</subscript></entry> + <entry>y<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>v<subscript>9</subscript></entry> + <entry>v<subscript>8</subscript></entry> + <entry>v<subscript>7</subscript></entry> + <entry>v<subscript>6</subscript></entry> + <entry>v<subscript>5</subscript></entry> + <entry>v<subscript>4</subscript></entry> + <entry>v<subscript>3</subscript></entry> + <entry>v<subscript>2</subscript></entry> + <entry>v<subscript>1</subscript></entry> + <entry>v<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>y<subscript>9</subscript></entry> + <entry>y<subscript>8</subscript></entry> + <entry>y<subscript>7</subscript></entry> + <entry>y<subscript>6</subscript></entry> + <entry>y<subscript>5</subscript></entry> + <entry>y<subscript>4</subscript></entry> + <entry>y<subscript>3</subscript></entry> + <entry>y<subscript>2</subscript></entry> + <entry>y<subscript>1</subscript></entry> + <entry>y<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>u<subscript>9</subscript></entry> + <entry>u<subscript>8</subscript></entry> + <entry>u<subscript>7</subscript></entry> + <entry>u<subscript>6</subscript></entry> + <entry>u<subscript>5</subscript></entry> + <entry>u<subscript>4</subscript></entry> + <entry>u<subscript>3</subscript></entry> + <entry>u<subscript>2</subscript></entry> + <entry>u<subscript>1</subscript></entry> + <entry>u<subscript>0</subscript></entry> + </row> + <row id="V4L2-MBUS-FMT-Y12-1X12"> + <entry>V4L2_MBUS_FMT_Y12_1X12</entry> + <entry>0x2013</entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>y<subscript>11</subscript></entry> + <entry>y<subscript>10</subscript></entry> + <entry>y<subscript>9</subscript></entry> + <entry>y<subscript>8</subscript></entry> + <entry>y<subscript>7</subscript></entry> + <entry>y<subscript>6</subscript></entry> + <entry>y<subscript>5</subscript></entry> + <entry>y<subscript>4</subscript></entry> + <entry>y<subscript>3</subscript></entry> + <entry>y<subscript>2</subscript></entry> + <entry>y<subscript>1</subscript></entry> + <entry>y<subscript>0</subscript></entry> + </row> + <row id="V4L2-MBUS-FMT-UYVY8-1X16"> + <entry>V4L2_MBUS_FMT_UYVY8_1X16</entry> + <entry>0x200f</entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>u<subscript>7</subscript></entry> + <entry>u<subscript>6</subscript></entry> + <entry>u<subscript>5</subscript></entry> + <entry>u<subscript>4</subscript></entry> + <entry>u<subscript>3</subscript></entry> + <entry>u<subscript>2</subscript></entry> + <entry>u<subscript>1</subscript></entry> + <entry>u<subscript>0</subscript></entry> + <entry>y<subscript>7</subscript></entry> + <entry>y<subscript>6</subscript></entry> + <entry>y<subscript>5</subscript></entry> + <entry>y<subscript>4</subscript></entry> + <entry>y<subscript>3</subscript></entry> + <entry>y<subscript>2</subscript></entry> + <entry>y<subscript>1</subscript></entry> + <entry>y<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>v<subscript>7</subscript></entry> + <entry>v<subscript>6</subscript></entry> + <entry>v<subscript>5</subscript></entry> + <entry>v<subscript>4</subscript></entry> + <entry>v<subscript>3</subscript></entry> + <entry>v<subscript>2</subscript></entry> + <entry>v<subscript>1</subscript></entry> + <entry>v<subscript>0</subscript></entry> + <entry>y<subscript>7</subscript></entry> + <entry>y<subscript>6</subscript></entry> + <entry>y<subscript>5</subscript></entry> + <entry>y<subscript>4</subscript></entry> + <entry>y<subscript>3</subscript></entry> + <entry>y<subscript>2</subscript></entry> + <entry>y<subscript>1</subscript></entry> + <entry>y<subscript>0</subscript></entry> + </row> + <row id="V4L2-MBUS-FMT-VYUY8-1X16"> + <entry>V4L2_MBUS_FMT_VYUY8_1X16</entry> + <entry>0x2010</entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>v<subscript>7</subscript></entry> + <entry>v<subscript>6</subscript></entry> + <entry>v<subscript>5</subscript></entry> + <entry>v<subscript>4</subscript></entry> + <entry>v<subscript>3</subscript></entry> + <entry>v<subscript>2</subscript></entry> + <entry>v<subscript>1</subscript></entry> + <entry>v<subscript>0</subscript></entry> + <entry>y<subscript>7</subscript></entry> + <entry>y<subscript>6</subscript></entry> + <entry>y<subscript>5</subscript></entry> + <entry>y<subscript>4</subscript></entry> + <entry>y<subscript>3</subscript></entry> + <entry>y<subscript>2</subscript></entry> + <entry>y<subscript>1</subscript></entry> + <entry>y<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>u<subscript>7</subscript></entry> + <entry>u<subscript>6</subscript></entry> + <entry>u<subscript>5</subscript></entry> + <entry>u<subscript>4</subscript></entry> + <entry>u<subscript>3</subscript></entry> + <entry>u<subscript>2</subscript></entry> + <entry>u<subscript>1</subscript></entry> + <entry>u<subscript>0</subscript></entry> + <entry>y<subscript>7</subscript></entry> + <entry>y<subscript>6</subscript></entry> + <entry>y<subscript>5</subscript></entry> + <entry>y<subscript>4</subscript></entry> + <entry>y<subscript>3</subscript></entry> + <entry>y<subscript>2</subscript></entry> + <entry>y<subscript>1</subscript></entry> + <entry>y<subscript>0</subscript></entry> + </row> + <row id="V4L2-MBUS-FMT-YUYV8-1X16"> + <entry>V4L2_MBUS_FMT_YUYV8_1X16</entry> + <entry>0x2011</entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>y<subscript>7</subscript></entry> + <entry>y<subscript>6</subscript></entry> + <entry>y<subscript>5</subscript></entry> + <entry>y<subscript>4</subscript></entry> + <entry>y<subscript>3</subscript></entry> + <entry>y<subscript>2</subscript></entry> + <entry>y<subscript>1</subscript></entry> + <entry>y<subscript>0</subscript></entry> + <entry>u<subscript>7</subscript></entry> + <entry>u<subscript>6</subscript></entry> + <entry>u<subscript>5</subscript></entry> + <entry>u<subscript>4</subscript></entry> + <entry>u<subscript>3</subscript></entry> + <entry>u<subscript>2</subscript></entry> + <entry>u<subscript>1</subscript></entry> + <entry>u<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>y<subscript>7</subscript></entry> + <entry>y<subscript>6</subscript></entry> + <entry>y<subscript>5</subscript></entry> + <entry>y<subscript>4</subscript></entry> + <entry>y<subscript>3</subscript></entry> + <entry>y<subscript>2</subscript></entry> + <entry>y<subscript>1</subscript></entry> + <entry>y<subscript>0</subscript></entry> + <entry>v<subscript>7</subscript></entry> + <entry>v<subscript>6</subscript></entry> + <entry>v<subscript>5</subscript></entry> + <entry>v<subscript>4</subscript></entry> + <entry>v<subscript>3</subscript></entry> + <entry>v<subscript>2</subscript></entry> + <entry>v<subscript>1</subscript></entry> + <entry>v<subscript>0</subscript></entry> + </row> + <row id="V4L2-MBUS-FMT-YVYU8-1X16"> + <entry>V4L2_MBUS_FMT_YVYU8_1X16</entry> + <entry>0x2012</entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>y<subscript>7</subscript></entry> + <entry>y<subscript>6</subscript></entry> + <entry>y<subscript>5</subscript></entry> + <entry>y<subscript>4</subscript></entry> + <entry>y<subscript>3</subscript></entry> + <entry>y<subscript>2</subscript></entry> + <entry>y<subscript>1</subscript></entry> + <entry>y<subscript>0</subscript></entry> + <entry>v<subscript>7</subscript></entry> + <entry>v<subscript>6</subscript></entry> + <entry>v<subscript>5</subscript></entry> + <entry>v<subscript>4</subscript></entry> + <entry>v<subscript>3</subscript></entry> + <entry>v<subscript>2</subscript></entry> + <entry>v<subscript>1</subscript></entry> + <entry>v<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>-</entry> + <entry>y<subscript>7</subscript></entry> + <entry>y<subscript>6</subscript></entry> + <entry>y<subscript>5</subscript></entry> + <entry>y<subscript>4</subscript></entry> + <entry>y<subscript>3</subscript></entry> + <entry>y<subscript>2</subscript></entry> + <entry>y<subscript>1</subscript></entry> + <entry>y<subscript>0</subscript></entry> + <entry>u<subscript>7</subscript></entry> + <entry>u<subscript>6</subscript></entry> + <entry>u<subscript>5</subscript></entry> + <entry>u<subscript>4</subscript></entry> + <entry>u<subscript>3</subscript></entry> + <entry>u<subscript>2</subscript></entry> + <entry>u<subscript>1</subscript></entry> + <entry>u<subscript>0</subscript></entry> + </row> + <row id="V4L2-MBUS-FMT-YUYV10-1X20"> + <entry>V4L2_MBUS_FMT_YUYV10_1X20</entry> + <entry>0x200d</entry> + <entry></entry> + <entry>y<subscript>9</subscript></entry> + <entry>y<subscript>8</subscript></entry> + <entry>y<subscript>7</subscript></entry> + <entry>y<subscript>6</subscript></entry> + <entry>y<subscript>5</subscript></entry> + <entry>y<subscript>4</subscript></entry> + <entry>y<subscript>3</subscript></entry> + <entry>y<subscript>2</subscript></entry> + <entry>y<subscript>1</subscript></entry> + <entry>y<subscript>0</subscript></entry> + <entry>u<subscript>9</subscript></entry> + <entry>u<subscript>8</subscript></entry> + <entry>u<subscript>7</subscript></entry> + <entry>u<subscript>6</subscript></entry> + <entry>u<subscript>5</subscript></entry> + <entry>u<subscript>4</subscript></entry> + <entry>u<subscript>3</subscript></entry> + <entry>u<subscript>2</subscript></entry> + <entry>u<subscript>1</subscript></entry> + <entry>u<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>y<subscript>9</subscript></entry> + <entry>y<subscript>8</subscript></entry> + <entry>y<subscript>7</subscript></entry> + <entry>y<subscript>6</subscript></entry> + <entry>y<subscript>5</subscript></entry> + <entry>y<subscript>4</subscript></entry> + <entry>y<subscript>3</subscript></entry> + <entry>y<subscript>2</subscript></entry> + <entry>y<subscript>1</subscript></entry> + <entry>y<subscript>0</subscript></entry> + <entry>v<subscript>9</subscript></entry> + <entry>v<subscript>8</subscript></entry> + <entry>v<subscript>7</subscript></entry> + <entry>v<subscript>6</subscript></entry> + <entry>v<subscript>5</subscript></entry> + <entry>v<subscript>4</subscript></entry> + <entry>v<subscript>3</subscript></entry> + <entry>v<subscript>2</subscript></entry> + <entry>v<subscript>1</subscript></entry> + <entry>v<subscript>0</subscript></entry> + </row> + <row id="V4L2-MBUS-FMT-YVYU10-1X20"> + <entry>V4L2_MBUS_FMT_YVYU10_1X20</entry> + <entry>0x200e</entry> + <entry></entry> + <entry>y<subscript>9</subscript></entry> + <entry>y<subscript>8</subscript></entry> + <entry>y<subscript>7</subscript></entry> + <entry>y<subscript>6</subscript></entry> + <entry>y<subscript>5</subscript></entry> + <entry>y<subscript>4</subscript></entry> + <entry>y<subscript>3</subscript></entry> + <entry>y<subscript>2</subscript></entry> + <entry>y<subscript>1</subscript></entry> + <entry>y<subscript>0</subscript></entry> + <entry>v<subscript>9</subscript></entry> + <entry>v<subscript>8</subscript></entry> + <entry>v<subscript>7</subscript></entry> + <entry>v<subscript>6</subscript></entry> + <entry>v<subscript>5</subscript></entry> + <entry>v<subscript>4</subscript></entry> + <entry>v<subscript>3</subscript></entry> + <entry>v<subscript>2</subscript></entry> + <entry>v<subscript>1</subscript></entry> + <entry>v<subscript>0</subscript></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry></entry> + <entry>y<subscript>9</subscript></entry> + <entry>y<subscript>8</subscript></entry> + <entry>y<subscript>7</subscript></entry> + <entry>y<subscript>6</subscript></entry> + <entry>y<subscript>5</subscript></entry> + <entry>y<subscript>4</subscript></entry> + <entry>y<subscript>3</subscript></entry> + <entry>y<subscript>2</subscript></entry> + <entry>y<subscript>1</subscript></entry> + <entry>y<subscript>0</subscript></entry> + <entry>u<subscript>9</subscript></entry> + <entry>u<subscript>8</subscript></entry> + <entry>u<subscript>7</subscript></entry> + <entry>u<subscript>6</subscript></entry> + <entry>u<subscript>5</subscript></entry> + <entry>u<subscript>4</subscript></entry> + <entry>u<subscript>3</subscript></entry> + <entry>u<subscript>2</subscript></entry> + <entry>u<subscript>1</subscript></entry> + <entry>u<subscript>0</subscript></entry> + </row> + </tbody> + </tgroup> + </table> + </section> + </section> +</section> diff --git a/Documentation/DocBook/v4l/v4l2.xml b/Documentation/DocBook/v4l/v4l2.xml index 9288af96de34..a7fd76d0dac1 100644 --- a/Documentation/DocBook/v4l/v4l2.xml +++ b/Documentation/DocBook/v4l/v4l2.xml @@ -85,6 +85,17 @@ Remote Controller chapter.</contrib> </address> </affiliation> </author> + + <author> + <firstname>Pawel</firstname> + <surname>Osciak</surname> + <contrib>Designed and documented the multi-planar API.</contrib> + <affiliation> + <address> + <email>pawel AT osciak.com</email> + </address> + </affiliation> + </author> </authorgroup> <copyright> @@ -102,7 +113,8 @@ Remote Controller chapter.</contrib> <year>2010</year> <year>2011</year> <holder>Bill Dirks, Michael H. Schimek, Hans Verkuil, Martin -Rubli, Andy Walls, Muralidharan Karicheri, Mauro Carvalho Chehab</holder> +Rubli, Andy Walls, Muralidharan Karicheri, Mauro Carvalho Chehab, + Pawel Osciak</holder> </copyright> <legalnotice> <para>Except when explicitly stated as GPL, programming examples within @@ -116,6 +128,13 @@ structs, ioctls) must be noted in more detail in the history chapter applications. --> <revision> + <revnumber>2.6.39</revnumber> + <date>2011-03-01</date> + <authorinitials>mcc, po</authorinitials> + <revremark>Removed VIDIOC_*_OLD from videodev2.h header and update it to reflect latest changes. Added the <link linkend="planar-apis">multi-planar API</link>.</revremark> + </revision> + + <revision> <revnumber>2.6.37</revnumber> <date>2010-08-06</date> <authorinitials>hv</authorinitials> @@ -382,7 +401,7 @@ and discussions on the V4L mailing list.</revremark> </partinfo> <title>Video for Linux Two API Specification</title> - <subtitle>Revision 2.6.38</subtitle> + <subtitle>Revision 2.6.39</subtitle> <chapter id="common"> &sub-common; @@ -411,6 +430,7 @@ and discussions on the V4L mailing list.</revremark> <section id="radio"> &sub-dev-radio; </section> <section id="rds"> &sub-dev-rds; </section> <section id="event"> &sub-dev-event; </section> + <section id="subdev"> &sub-dev-subdev; </section> </chapter> <chapter id="driver"> @@ -478,6 +498,12 @@ and discussions on the V4L mailing list.</revremark> &sub-reqbufs; &sub-s-hw-freq-seek; &sub-streamon; + &sub-subdev-enum-frame-interval; + &sub-subdev-enum-frame-size; + &sub-subdev-enum-mbus-code; + &sub-subdev-g-crop; + &sub-subdev-g-fmt; + &sub-subdev-g-frame-interval; &sub-subscribe-event; <!-- End of ioctls. --> &sub-mmap; diff --git a/Documentation/DocBook/v4l/videodev2.h.xml b/Documentation/DocBook/v4l/videodev2.h.xml index 325b23b6964c..2b796a2ee98a 100644 --- a/Documentation/DocBook/v4l/videodev2.h.xml +++ b/Documentation/DocBook/v4l/videodev2.h.xml @@ -71,6 +71,7 @@ * Moved from videodev.h */ #define VIDEO_MAX_FRAME 32 +#define VIDEO_MAX_PLANES 8 #ifndef __KERNEL__ @@ -158,9 +159,23 @@ enum <link linkend="v4l2-buf-type">v4l2_buf_type</link> { /* Experimental */ V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY = 8, #endif + V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE = 9, + V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE = 10, V4L2_BUF_TYPE_PRIVATE = 0x80, }; +#define V4L2_TYPE_IS_MULTIPLANAR(type) \ + ((type) == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE \ + || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) + +#define V4L2_TYPE_IS_OUTPUT(type) \ + ((type) == V4L2_BUF_TYPE_VIDEO_OUTPUT \ + || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE \ + || (type) == V4L2_BUF_TYPE_VIDEO_OVERLAY \ + || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY \ + || (type) == V4L2_BUF_TYPE_VBI_OUTPUT \ + || (type) == V4L2_BUF_TYPE_SLICED_VBI_OUTPUT) + enum <link linkend="v4l2-tuner-type">v4l2_tuner_type</link> { V4L2_TUNER_RADIO = 1, V4L2_TUNER_ANALOG_TV = 2, @@ -246,6 +261,11 @@ struct <link linkend="v4l2-capability">v4l2_capability</link> { #define V4L2_CAP_HW_FREQ_SEEK 0x00000400 /* Can do hardware frequency seek */ #define V4L2_CAP_RDS_OUTPUT 0x00000800 /* Is an RDS encoder */ +/* Is a video capture device that supports multiplanar formats */ +#define V4L2_CAP_VIDEO_CAPTURE_MPLANE 0x00001000 +/* Is a video output device that supports multiplanar formats */ +#define V4L2_CAP_VIDEO_OUTPUT_MPLANE 0x00002000 + #define V4L2_CAP_TUNER 0x00010000 /* has a tuner */ #define V4L2_CAP_AUDIO 0x00020000 /* has audio support */ #define V4L2_CAP_RADIO 0x00040000 /* is a radio device */ @@ -320,6 +340,13 @@ struct <link linkend="v4l2-pix-format">v4l2_pix_format</link> { #define <link linkend="V4L2-PIX-FMT-NV16">V4L2_PIX_FMT_NV16</link> v4l2_fourcc('N', 'V', '1', '6') /* 16 Y/CbCr 4:2:2 */ #define <link linkend="V4L2-PIX-FMT-NV61">V4L2_PIX_FMT_NV61</link> v4l2_fourcc('N', 'V', '6', '1') /* 16 Y/CrCb 4:2:2 */ +/* two non contiguous planes - one Y, one Cr + Cb interleaved */ +#define <link linkend="V4L2-PIX-FMT-NV12M">V4L2_PIX_FMT_NV12M</link> v4l2_fourcc('N', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 */ +#define <link linkend="V4L2-PIX-FMT-NV12MT">V4L2_PIX_FMT_NV12MT</link> v4l2_fourcc('T', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 64x32 macroblocks */ + +/* three non contiguous planes - Y, Cb, Cr */ +#define <link linkend="V4L2-PIX-FMT-YUV420M">V4L2_PIX_FMT_YUV420M</link> v4l2_fourcc('Y', 'M', '1', '2') /* 12 YUV420 planar */ + /* Bayer formats - see http://www.siliconimaging.com/RGB%20Bayer.htm */ #define <link linkend="V4L2-PIX-FMT-SBGGR8">V4L2_PIX_FMT_SBGGR8</link> v4l2_fourcc('B', 'A', '8', '1') /* 8 BGBG.. GRGR.. */ #define <link linkend="V4L2-PIX-FMT-SGBRG8">V4L2_PIX_FMT_SGBRG8</link> v4l2_fourcc('G', 'B', 'R', 'G') /* 8 GBGB.. RGRG.. */ @@ -518,6 +545,62 @@ struct <link linkend="v4l2-requestbuffers">v4l2_requestbuffers</link> { __u32 reserved[2]; }; +/** + * struct <link linkend="v4l2-plane">v4l2_plane</link> - plane info for multi-planar buffers + * @bytesused: number of bytes occupied by data in the plane (payload) + * @length: size of this plane (NOT the payload) in bytes + * @mem_offset: when memory in the associated struct <link linkend="v4l2-buffer">v4l2_buffer</link> is + * V4L2_MEMORY_MMAP, equals the offset from the start of + * the device memory for this plane (or is a "cookie" that + * should be passed to mmap() called on the video node) + * @userptr: when memory is V4L2_MEMORY_USERPTR, a userspace pointer + * pointing to this plane + * @data_offset: offset in the plane to the start of data; usually 0, + * unless there is a header in front of the data + * + * Multi-planar buffers consist of one or more planes, e.g. an YCbCr buffer + * with two planes can have one plane for Y, and another for interleaved CbCr + * components. Each plane can reside in a separate memory buffer, or even in + * a completely separate memory node (e.g. in embedded devices). + */ +struct <link linkend="v4l2-plane">v4l2_plane</link> { + __u32 bytesused; + __u32 length; + union { + __u32 mem_offset; + unsigned long userptr; + } m; + __u32 data_offset; + __u32 reserved[11]; +}; + +/** + * struct <link linkend="v4l2-buffer">v4l2_buffer</link> - video buffer info + * @index: id number of the buffer + * @type: buffer type (type == *_MPLANE for multiplanar buffers) + * @bytesused: number of bytes occupied by data in the buffer (payload); + * unused (set to 0) for multiplanar buffers + * @flags: buffer informational flags + * @field: field order of the image in the buffer + * @timestamp: frame timestamp + * @timecode: frame timecode + * @sequence: sequence count of this frame + * @memory: the method, in which the actual video data is passed + * @offset: for non-multiplanar buffers with memory == V4L2_MEMORY_MMAP; + * offset from the start of the device memory for this plane, + * (or a "cookie" that should be passed to mmap() as offset) + * @userptr: for non-multiplanar buffers with memory == V4L2_MEMORY_USERPTR; + * a userspace pointer pointing to this buffer + * @planes: for multiplanar buffers; userspace pointer to the array of plane + * info structs for this buffer + * @length: size in bytes of the buffer (NOT its payload) for single-plane + * buffers (when type != *_MPLANE); number of elements in the + * planes array for multi-plane buffers + * @input: input number from which the video data has has been captured + * + * Contains data exchanged by application and driver using one of the Streaming + * I/O methods. + */ struct <link linkend="v4l2-buffer">v4l2_buffer</link> { __u32 index; enum <link linkend="v4l2-buf-type">v4l2_buf_type</link> type; @@ -533,6 +616,7 @@ struct <link linkend="v4l2-buffer">v4l2_buffer</link> { union { __u32 offset; unsigned long userptr; + struct <link linkend="v4l2-plane">v4l2_plane</link> *planes; } m; __u32 length; __u32 input; @@ -1623,12 +1707,56 @@ struct <link linkend="v4l2-mpeg-vbi-fmt-ivtv">v4l2_mpeg_vbi_fmt_ivtv</link> { * A G G R E G A T E S T R U C T U R E S */ -/* Stream data format +/** + * struct <link linkend="v4l2-plane-pix-format">v4l2_plane_pix_format</link> - additional, per-plane format definition + * @sizeimage: maximum size in bytes required for data, for which + * this plane will be used + * @bytesperline: distance in bytes between the leftmost pixels in two + * adjacent lines + */ +struct <link linkend="v4l2-plane-pix-format">v4l2_plane_pix_format</link> { + __u32 sizeimage; + __u16 bytesperline; + __u16 reserved[7]; +} __attribute__ ((packed)); + +/** + * struct <link linkend="v4l2-pix-format-mplane">v4l2_pix_format_mplane</link> - multiplanar format definition + * @width: image width in pixels + * @height: image height in pixels + * @pixelformat: little endian four character code (fourcc) + * @field: field order (for interlaced video) + * @colorspace: supplemental to pixelformat + * @plane_fmt: per-plane information + * @num_planes: number of planes for this format + */ +struct <link linkend="v4l2-pix-format-mplane">v4l2_pix_format_mplane</link> { + __u32 width; + __u32 height; + __u32 pixelformat; + enum <link linkend="v4l2-field">v4l2_field</link> field; + enum <link linkend="v4l2-colorspace">v4l2_colorspace</link> colorspace; + + struct <link linkend="v4l2-plane-pix-format">v4l2_plane_pix_format</link> plane_fmt[VIDEO_MAX_PLANES]; + __u8 num_planes; + __u8 reserved[11]; +} __attribute__ ((packed)); + +/** + * struct <link linkend="v4l2-format">v4l2_format</link> - stream data format + * @type: type of the data stream + * @pix: definition of an image format + * @pix_mp: definition of a multiplanar image format + * @win: definition of an overlaid image + * @vbi: raw VBI capture or output parameters + * @sliced: sliced VBI capture or output parameters + * @raw_data: placeholder for future extensions and custom formats */ struct <link linkend="v4l2-format">v4l2_format</link> { enum <link linkend="v4l2-buf-type">v4l2_buf_type</link> type; union { struct <link linkend="v4l2-pix-format">v4l2_pix_format</link> pix; /* V4L2_BUF_TYPE_VIDEO_CAPTURE */ + struct <link linkend="v4l2-pix-format-mplane">v4l2_pix_format_mplane</link> pix_mp; /* V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE */ struct <link linkend="v4l2-window">v4l2_window</link> win; /* V4L2_BUF_TYPE_VIDEO_OVERLAY */ struct <link linkend="v4l2-vbi-format">v4l2_vbi_format</link> vbi; /* V4L2_BUF_TYPE_VBI_CAPTURE */ struct <link linkend="v4l2-sliced-vbi-format">v4l2_sliced_vbi_format</link> sliced; /* V4L2_BUF_TYPE_SLICED_VBI_CAPTURE */ @@ -1636,7 +1764,6 @@ struct <link linkend="v4l2-format">v4l2_format</link> { } fmt; }; - /* Stream type-dependent parameters */ struct <link linkend="v4l2-streamparm">v4l2_streamparm</link> { @@ -1809,16 +1936,6 @@ struct <link linkend="v4l2-dbg-chip-ident">v4l2_dbg_chip_ident</link> { /* Reminder: when adding new ioctls please add support for them to drivers/media/video/v4l2-compat-ioctl32.c as well! */ -#ifdef __OLD_VIDIOC_ -/* for compatibility, will go away some day */ -#define VIDIOC_OVERLAY_OLD _IOWR('V', 14, int) -#define VIDIOC_S_PARM_OLD _IOW('V', 22, struct <link linkend="v4l2-streamparm">v4l2_streamparm</link>) -#define VIDIOC_S_CTRL_OLD _IOW('V', 28, struct <link linkend="v4l2-control">v4l2_control</link>) -#define VIDIOC_G_AUDIO_OLD _IOWR('V', 33, struct <link linkend="v4l2-audio">v4l2_audio</link>) -#define VIDIOC_G_AUDOUT_OLD _IOWR('V', 49, struct <link linkend="v4l2-audioout">v4l2_audioout</link>) -#define VIDIOC_CROPCAP_OLD _IOR('V', 58, struct <link linkend="v4l2-cropcap">v4l2_cropcap</link>) -#endif - #define BASE_VIDIOC_PRIVATE 192 /* 192-255 are private */ #endif /* __LINUX_VIDEODEV2_H */ diff --git a/Documentation/DocBook/v4l/vidioc-enum-fmt.xml b/Documentation/DocBook/v4l/vidioc-enum-fmt.xml index 960d44615ca6..71d373b6d36a 100644 --- a/Documentation/DocBook/v4l/vidioc-enum-fmt.xml +++ b/Documentation/DocBook/v4l/vidioc-enum-fmt.xml @@ -76,7 +76,9 @@ pixelformat</structfield> field.</entry> <entry>Type of the data stream, set by the application. Only these types are valid here: <constant>V4L2_BUF_TYPE_VIDEO_CAPTURE</constant>, +<constant>V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE</constant>, <constant>V4L2_BUF_TYPE_VIDEO_OUTPUT</constant>, +<constant>V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE</constant>, <constant>V4L2_BUF_TYPE_VIDEO_OVERLAY</constant>, and custom (driver defined) types with code <constant>V4L2_BUF_TYPE_PRIVATE</constant> and higher.</entry> diff --git a/Documentation/DocBook/v4l/vidioc-g-fmt.xml b/Documentation/DocBook/v4l/vidioc-g-fmt.xml index 7c7d1b72c40d..a4ae59b664eb 100644 --- a/Documentation/DocBook/v4l/vidioc-g-fmt.xml +++ b/Documentation/DocBook/v4l/vidioc-g-fmt.xml @@ -60,11 +60,13 @@ application.</para> <structfield>type</structfield> field of a struct <structname>v4l2_format</structname> to the respective buffer (stream) type. For example video capture devices use -<constant>V4L2_BUF_TYPE_VIDEO_CAPTURE</constant>. When the application +<constant>V4L2_BUF_TYPE_VIDEO_CAPTURE</constant> or +<constant>V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE</constant>. When the application calls the <constant>VIDIOC_G_FMT</constant> ioctl with a pointer to this structure the driver fills the respective member of the <structfield>fmt</structfield> union. In case of video capture devices -that is the &v4l2-pix-format; <structfield>pix</structfield> member. +that is either the &v4l2-pix-format; <structfield>pix</structfield> or +the &v4l2-pix-format-mplane; <structfield>pix_mp</structfield> member. When the requested buffer type is not supported drivers return an &EINVAL;.</para> @@ -134,6 +136,15 @@ devices.</entry> </row> <row> <entry></entry> + <entry>&v4l2-pix-format-mplane;</entry> + <entry><structfield>pix_mp</structfield></entry> + <entry>Definition of an image format, see <xref + linkend="pixfmt" />, used by video capture and output +devices that support the <link linkend="planar-apis">multi-planar +version of the API</link>.</entry> + </row> + <row> + <entry></entry> <entry>&v4l2-window;</entry> <entry><structfield>win</structfield></entry> <entry>Definition of an overlaid image, see <xref diff --git a/Documentation/DocBook/v4l/vidioc-qbuf.xml b/Documentation/DocBook/v4l/vidioc-qbuf.xml index ab691ebf3b93..f2b11f8a4031 100644 --- a/Documentation/DocBook/v4l/vidioc-qbuf.xml +++ b/Documentation/DocBook/v4l/vidioc-qbuf.xml @@ -64,7 +64,8 @@ zero to the number of buffers allocated with &VIDIOC-REQBUFS; contents of the struct <structname>v4l2_buffer</structname> returned by a &VIDIOC-QUERYBUF; ioctl will do as well. When the buffer is intended for output (<structfield>type</structfield> is -<constant>V4L2_BUF_TYPE_VIDEO_OUTPUT</constant> or +<constant>V4L2_BUF_TYPE_VIDEO_OUTPUT</constant>, +<constant>V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE</constant>, or <constant>V4L2_BUF_TYPE_VBI_OUTPUT</constant>) applications must also initialize the <structfield>bytesused</structfield>, <structfield>field</structfield> and @@ -75,7 +76,11 @@ supports capturing from specific video inputs and you want to specify a video input, then <structfield>flags</structfield> should be set to <constant>V4L2_BUF_FLAG_INPUT</constant> and the field <structfield>input</structfield> must be initialized to the desired input. -The <structfield>reserved</structfield> field must be set to 0. +The <structfield>reserved</structfield> field must be set to 0. When using +the <link linkend="planar-apis">multi-planar API</link>, the +<structfield>m.planes</structfield> field must contain a userspace pointer +to a filled-in array of &v4l2-plane; and the <structfield>length</structfield> +field must be set to the number of elements in that array. </para> <para>To enqueue a <link linkend="mmap">memory mapped</link> @@ -93,10 +98,13 @@ structure the driver sets the buffer applications set the <structfield>memory</structfield> field to <constant>V4L2_MEMORY_USERPTR</constant>, the <structfield>m.userptr</structfield> field to the address of the -buffer and <structfield>length</structfield> to its size. -When <constant>VIDIOC_QBUF</constant> is called with a pointer to this -structure the driver sets the <constant>V4L2_BUF_FLAG_QUEUED</constant> -flag and clears the <constant>V4L2_BUF_FLAG_MAPPED</constant> and +buffer and <structfield>length</structfield> to its size. When the multi-planar +API is used, <structfield>m.userptr</structfield> and +<structfield>length</structfield> members of the passed array of &v4l2-plane; +have to be used instead. When <constant>VIDIOC_QBUF</constant> is called with +a pointer to this structure the driver sets the +<constant>V4L2_BUF_FLAG_QUEUED</constant> flag and clears the +<constant>V4L2_BUF_FLAG_MAPPED</constant> and <constant>V4L2_BUF_FLAG_DONE</constant> flags in the <structfield>flags</structfield> field, or it returns an error code. This ioctl locks the memory pages of the buffer in physical memory, @@ -115,7 +123,9 @@ remaining fields or returns an error code. The driver may also set <constant>V4L2_BUF_FLAG_ERROR</constant> in the <structfield>flags</structfield> field. It indicates a non-critical (recoverable) streaming error. In such case the application may continue as normal, but should be aware that data in the -dequeued buffer might be corrupted.</para> +dequeued buffer might be corrupted. When using the multi-planar API, the +planes array does not have to be passed; the <structfield>m.planes</structfield> +member must be set to NULL in that case.</para> <para>By default <constant>VIDIOC_DQBUF</constant> blocks when no buffer is in the outgoing queue. When the diff --git a/Documentation/DocBook/v4l/vidioc-querybuf.xml b/Documentation/DocBook/v4l/vidioc-querybuf.xml index e649805a4908..5c104d42d31c 100644 --- a/Documentation/DocBook/v4l/vidioc-querybuf.xml +++ b/Documentation/DocBook/v4l/vidioc-querybuf.xml @@ -61,6 +61,10 @@ buffer at any time after buffers have been allocated with the to the number of buffers allocated with &VIDIOC-REQBUFS; (&v4l2-requestbuffers; <structfield>count</structfield>) minus one. The <structfield>reserved</structfield> field should to set to 0. +When using the <link linkend="planar-apis">multi-planar API</link>, the +<structfield>m.planes</structfield> field must contain a userspace pointer to an +array of &v4l2-plane; and the <structfield>length</structfield> field has +to be set to the number of elements in that array. After calling <constant>VIDIOC_QUERYBUF</constant> with a pointer to this structure drivers return an error code or fill the rest of the structure.</para> @@ -70,11 +74,13 @@ the structure.</para> <constant>V4L2_BUF_FLAG_QUEUED</constant> and <constant>V4L2_BUF_FLAG_DONE</constant> flags will be valid. The <structfield>memory</structfield> field will be set to the current -I/O method, the <structfield>m.offset</structfield> +I/O method. For the single-planar API, the <structfield>m.offset</structfield> contains the offset of the buffer from the start of the device memory, -the <structfield>length</structfield> field its size. The driver may -or may not set the remaining fields and flags, they are meaningless in -this context.</para> +the <structfield>length</structfield> field its size. For the multi-planar API, +fields <structfield>m.mem_offset</structfield> and +<structfield>length</structfield> in the <structfield>m.planes</structfield> +array elements will be used instead. The driver may or may not set the remaining +fields and flags, they are meaningless in this context.</para> <para>The <structname>v4l2_buffer</structname> structure is specified in <xref linkend="buffer" />.</para> diff --git a/Documentation/DocBook/v4l/vidioc-querycap.xml b/Documentation/DocBook/v4l/vidioc-querycap.xml index d499da93a450..f29f1b86213c 100644 --- a/Documentation/DocBook/v4l/vidioc-querycap.xml +++ b/Documentation/DocBook/v4l/vidioc-querycap.xml @@ -142,16 +142,30 @@ this array to zero.</entry> <row> <entry><constant>V4L2_CAP_VIDEO_CAPTURE</constant></entry> <entry>0x00000001</entry> - <entry>The device supports the <link + <entry>The device supports the single-planar API through the <link linkend="capture">Video Capture</link> interface.</entry> </row> <row> + <entry><constant>V4L2_CAP_VIDEO_CAPTURE_MPLANE</constant></entry> + <entry>0x00001000</entry> + <entry>The device supports the + <link linkend="planar-apis">multi-planar API</link> through the + <link linkend="capture">Video Capture</link> interface.</entry> + </row> + <row> <entry><constant>V4L2_CAP_VIDEO_OUTPUT</constant></entry> <entry>0x00000002</entry> - <entry>The device supports the <link + <entry>The device supports the single-planar API through the <link linkend="output">Video Output</link> interface.</entry> </row> <row> + <entry><constant>V4L2_CAP_VIDEO_OUTPUT_MPLANE</constant></entry> + <entry>0x00002000</entry> + <entry>The device supports the + <link linkend="planar-apis">multi-planar API</link> through the + <link linkend="output">Video Output</link> interface.</entry> + </row> + <row> <entry><constant>V4L2_CAP_VIDEO_OVERLAY</constant></entry> <entry>0x00000004</entry> <entry>The device supports the <link diff --git a/Documentation/DocBook/v4l/vidioc-streamon.xml b/Documentation/DocBook/v4l/vidioc-streamon.xml index e42bff1f2c0a..75ed39bf4d2b 100644 --- a/Documentation/DocBook/v4l/vidioc-streamon.xml +++ b/Documentation/DocBook/v4l/vidioc-streamon.xml @@ -93,6 +93,15 @@ synchronize with other events.</para> been allocated (memory mapping) or enqueued (output) yet.</para> </listitem> </varlistentry> + <varlistentry> + <term><errorcode>EPIPE</errorcode></term> + <listitem> + <para>The driver implements <link + linkend="pad-level-formats">pad-level format configuration</link> and + the pipeline configuration is invalid. + </para> + </listitem> + </varlistentry> </variablelist> </refsect1> </refentry> diff --git a/Documentation/DocBook/v4l/vidioc-subdev-enum-frame-interval.xml b/Documentation/DocBook/v4l/vidioc-subdev-enum-frame-interval.xml new file mode 100644 index 000000000000..2f8f4f0a0235 --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-subdev-enum-frame-interval.xml @@ -0,0 +1,152 @@ +<refentry id="vidioc-subdev-enum-frame-interval"> + <refmeta> + <refentrytitle>ioctl VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL</refname> + <refpurpose>Enumerate frame intervals</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcprototype> + <funcdef>int <function>ioctl</function></funcdef> + <paramdef>int <parameter>fd</parameter></paramdef> + <paramdef>int <parameter>request</parameter></paramdef> + <paramdef>struct v4l2_subdev_frame_interval_enum * + <parameter>argp</parameter></paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Arguments</title> + + <variablelist> + <varlistentry> + <term><parameter>fd</parameter></term> + <listitem> + <para>&fd;</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>request</parameter></term> + <listitem> + <para>VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>argp</parameter></term> + <listitem> + <para></para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + + <refsect1> + <title>Description</title> + + <note> + <title>Experimental</title> + <para>This is an <link linkend="experimental">experimental</link> + interface and may change in the future.</para> + </note> + + <para>This ioctl lets applications enumerate available frame intervals on a + given sub-device pad. Frame intervals only makes sense for sub-devices that + can control the frame period on their own. This includes, for instance, + image sensors and TV tuners.</para> + + <para>For the common use case of image sensors, the frame intervals + available on the sub-device output pad depend on the frame format and size + on the same pad. Applications must thus specify the desired format and size + when enumerating frame intervals.</para> + + <para>To enumerate frame intervals applications initialize the + <structfield>index</structfield>, <structfield>pad</structfield>, + <structfield>code</structfield>, <structfield>width</structfield> and + <structfield>height</structfield> fields of + &v4l2-subdev-frame-interval-enum; and call the + <constant>VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL</constant> ioctl with a pointer + to this structure. Drivers fill the rest of the structure or return + an &EINVAL; if one of the input fields is invalid. All frame intervals are + enumerable by beginning at index zero and incrementing by one until + <errorcode>EINVAL</errorcode> is returned.</para> + + <para>Available frame intervals may depend on the current 'try' formats + at other pads of the sub-device, as well as on the current active links. See + &VIDIOC-SUBDEV-G-FMT; for more information about the try formats.</para> + + <para>Sub-devices that support the frame interval enumeration ioctl should + implemented it on a single pad only. Its behaviour when supported on + multiple pads of the same sub-device is not defined.</para> + + <table pgwide="1" frame="none" id="v4l2-subdev-frame-interval-enum"> + <title>struct <structname>v4l2_subdev_frame_interval_enum</structname></title> + <tgroup cols="3"> + &cs-str; + <tbody valign="top"> + <row> + <entry>__u32</entry> + <entry><structfield>index</structfield></entry> + <entry>Number of the format in the enumeration, set by the + application.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>pad</structfield></entry> + <entry>Pad number as reported by the media controller API.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>code</structfield></entry> + <entry>The media bus format code, as defined in + <xref linkend="v4l2-mbus-format" />.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>width</structfield></entry> + <entry>Frame width, in pixels.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>height</structfield></entry> + <entry>Frame height, in pixels.</entry> + </row> + <row> + <entry>&v4l2-fract;</entry> + <entry><structfield>interval</structfield></entry> + <entry>Period, in seconds, between consecutive video frames.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>reserved</structfield>[9]</entry> + <entry>Reserved for future extensions. Applications and drivers must + set the array to zero.</entry> + </row> + </tbody> + </tgroup> + </table> + </refsect1> + + <refsect1> + &return-value; + + <variablelist> + <varlistentry> + <term><errorcode>EINVAL</errorcode></term> + <listitem> + <para>The &v4l2-subdev-frame-interval-enum; + <structfield>pad</structfield> references a non-existing pad, one of + the <structfield>code</structfield>, <structfield>width</structfield> + or <structfield>height</structfield> fields are invalid for the given + pad or the <structfield>index</structfield> field is out of bounds. + </para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> +</refentry> diff --git a/Documentation/DocBook/v4l/vidioc-subdev-enum-frame-size.xml b/Documentation/DocBook/v4l/vidioc-subdev-enum-frame-size.xml new file mode 100644 index 000000000000..79ce42b7c60c --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-subdev-enum-frame-size.xml @@ -0,0 +1,154 @@ +<refentry id="vidioc-subdev-enum-frame-size"> + <refmeta> + <refentrytitle>ioctl VIDIOC_SUBDEV_ENUM_FRAME_SIZE</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>VIDIOC_SUBDEV_ENUM_FRAME_SIZE</refname> + <refpurpose>Enumerate media bus frame sizes</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcprototype> + <funcdef>int <function>ioctl</function></funcdef> + <paramdef>int <parameter>fd</parameter></paramdef> + <paramdef>int <parameter>request</parameter></paramdef> + <paramdef>struct v4l2_subdev_frame_size_enum * + <parameter>argp</parameter></paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Arguments</title> + + <variablelist> + <varlistentry> + <term><parameter>fd</parameter></term> + <listitem> + <para>&fd;</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>request</parameter></term> + <listitem> + <para>VIDIOC_SUBDEV_ENUM_FRAME_SIZE</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>argp</parameter></term> + <listitem> + <para></para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + + <refsect1> + <title>Description</title> + + <note> + <title>Experimental</title> + <para>This is an <link linkend="experimental">experimental</link> + interface and may change in the future.</para> + </note> + + <para>This ioctl allows applications to enumerate all frame sizes + supported by a sub-device on the given pad for the given media bus format. + Supported formats can be retrieved with the &VIDIOC-SUBDEV-ENUM-MBUS-CODE; + ioctl.</para> + + <para>To enumerate frame sizes applications initialize the + <structfield>pad</structfield>, <structfield>code</structfield> and + <structfield>index</structfield> fields of the + &v4l2-subdev-mbus-code-enum; and call the + <constant>VIDIOC_SUBDEV_ENUM_FRAME_SIZE</constant> ioctl with a pointer to + the structure. Drivers fill the minimum and maximum frame sizes or return + an &EINVAL; if one of the input parameters is invalid.</para> + + <para>Sub-devices that only support discrete frame sizes (such as most + sensors) will return one or more frame sizes with identical minimum and + maximum values.</para> + + <para>Not all possible sizes in given [minimum, maximum] ranges need to be + supported. For instance, a scaler that uses a fixed-point scaling ratio + might not be able to produce every frame size between the minimum and + maximum values. Applications must use the &VIDIOC-SUBDEV-S-FMT; ioctl to + try the sub-device for an exact supported frame size.</para> + + <para>Available frame sizes may depend on the current 'try' formats at other + pads of the sub-device, as well as on the current active links and the + current values of V4L2 controls. See &VIDIOC-SUBDEV-G-FMT; for more + information about try formats.</para> + + <table pgwide="1" frame="none" id="v4l2-subdev-frame-size-enum"> + <title>struct <structname>v4l2_subdev_frame_size_enum</structname></title> + <tgroup cols="3"> + &cs-str; + <tbody valign="top"> + <row> + <entry>__u32</entry> + <entry><structfield>index</structfield></entry> + <entry>Number of the format in the enumeration, set by the + application.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>pad</structfield></entry> + <entry>Pad number as reported by the media controller API.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>code</structfield></entry> + <entry>The media bus format code, as defined in + <xref linkend="v4l2-mbus-format" />.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>min_width</structfield></entry> + <entry>Minimum frame width, in pixels.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>max_width</structfield></entry> + <entry>Maximum frame width, in pixels.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>min_height</structfield></entry> + <entry>Minimum frame height, in pixels.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>max_height</structfield></entry> + <entry>Maximum frame height, in pixels.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>reserved</structfield>[9]</entry> + <entry>Reserved for future extensions. Applications and drivers must + set the array to zero.</entry> + </row> + </tbody> + </tgroup> + </table> + </refsect1> + + <refsect1> + &return-value; + + <variablelist> + <varlistentry> + <term><errorcode>EINVAL</errorcode></term> + <listitem> + <para>The &v4l2-subdev-frame-size-enum; <structfield>pad</structfield> + references a non-existing pad, the <structfield>code</structfield> is + invalid for the given pad or the <structfield>index</structfield> + field is out of bounds.</para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> +</refentry> diff --git a/Documentation/DocBook/v4l/vidioc-subdev-enum-mbus-code.xml b/Documentation/DocBook/v4l/vidioc-subdev-enum-mbus-code.xml new file mode 100644 index 000000000000..a6b3432449f6 --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-subdev-enum-mbus-code.xml @@ -0,0 +1,119 @@ +<refentry id="vidioc-subdev-enum-mbus-code"> + <refmeta> + <refentrytitle>ioctl VIDIOC_SUBDEV_ENUM_MBUS_CODE</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>VIDIOC_SUBDEV_ENUM_MBUS_CODE</refname> + <refpurpose>Enumerate media bus formats</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcprototype> + <funcdef>int <function>ioctl</function></funcdef> + <paramdef>int <parameter>fd</parameter></paramdef> + <paramdef>int <parameter>request</parameter></paramdef> + <paramdef>struct v4l2_subdev_mbus_code_enum * + <parameter>argp</parameter></paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Arguments</title> + + <variablelist> + <varlistentry> + <term><parameter>fd</parameter></term> + <listitem> + <para>&fd;</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>request</parameter></term> + <listitem> + <para>VIDIOC_SUBDEV_ENUM_MBUS_CODE</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>argp</parameter></term> + <listitem> + <para></para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + + <refsect1> + <title>Description</title> + + <note> + <title>Experimental</title> + <para>This is an <link linkend="experimental">experimental</link> + interface and may change in the future.</para> + </note> + + <para>To enumerate media bus formats available at a given sub-device pad + applications initialize the <structfield>pad</structfield> and + <structfield>index</structfield> fields of &v4l2-subdev-mbus-code-enum; and + call the <constant>VIDIOC_SUBDEV_ENUM_MBUS_CODE</constant> ioctl with a + pointer to this structure. Drivers fill the rest of the structure or return + an &EINVAL; if either the <structfield>pad</structfield> or + <structfield>index</structfield> are invalid. All media bus formats are + enumerable by beginning at index zero and incrementing by one until + <errorcode>EINVAL</errorcode> is returned.</para> + + <para>Available media bus formats may depend on the current 'try' formats + at other pads of the sub-device, as well as on the current active links. See + &VIDIOC-SUBDEV-G-FMT; for more information about the try formats.</para> + + <table pgwide="1" frame="none" id="v4l2-subdev-mbus-code-enum"> + <title>struct <structname>v4l2_subdev_mbus_code_enum</structname></title> + <tgroup cols="3"> + &cs-str; + <tbody valign="top"> + <row> + <entry>__u32</entry> + <entry><structfield>pad</structfield></entry> + <entry>Pad number as reported by the media controller API.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>index</structfield></entry> + <entry>Number of the format in the enumeration, set by the + application.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>code</structfield></entry> + <entry>The media bus format code, as defined in + <xref linkend="v4l2-mbus-format" />.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>reserved</structfield>[9]</entry> + <entry>Reserved for future extensions. Applications and drivers must + set the array to zero.</entry> + </row> + </tbody> + </tgroup> + </table> + </refsect1> + + <refsect1> + &return-value; + + <variablelist> + <varlistentry> + <term><errorcode>EINVAL</errorcode></term> + <listitem> + <para>The &v4l2-subdev-mbus-code-enum; <structfield>pad</structfield> + references a non-existing pad, or the <structfield>index</structfield> + field is out of bounds.</para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> +</refentry> diff --git a/Documentation/DocBook/v4l/vidioc-subdev-g-crop.xml b/Documentation/DocBook/v4l/vidioc-subdev-g-crop.xml new file mode 100644 index 000000000000..06197323a8cc --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-subdev-g-crop.xml @@ -0,0 +1,155 @@ +<refentry id="vidioc-subdev-g-crop"> + <refmeta> + <refentrytitle>ioctl VIDIOC_SUBDEV_G_CROP, VIDIOC_SUBDEV_S_CROP</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>VIDIOC_SUBDEV_G_CROP</refname> + <refname>VIDIOC_SUBDEV_S_CROP</refname> + <refpurpose>Get or set the crop rectangle on a subdev pad</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcprototype> + <funcdef>int <function>ioctl</function></funcdef> + <paramdef>int <parameter>fd</parameter></paramdef> + <paramdef>int <parameter>request</parameter></paramdef> + <paramdef>struct v4l2_subdev_crop *<parameter>argp</parameter></paramdef> + </funcprototype> + </funcsynopsis> + <funcsynopsis> + <funcprototype> + <funcdef>int <function>ioctl</function></funcdef> + <paramdef>int <parameter>fd</parameter></paramdef> + <paramdef>int <parameter>request</parameter></paramdef> + <paramdef>const struct v4l2_subdev_crop *<parameter>argp</parameter></paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Arguments</title> + + <variablelist> + <varlistentry> + <term><parameter>fd</parameter></term> + <listitem> + <para>&fd;</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>request</parameter></term> + <listitem> + <para>VIDIOC_SUBDEV_G_CROP, VIDIOC_SUBDEV_S_CROP</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>argp</parameter></term> + <listitem> + <para></para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + + <refsect1> + <title>Description</title> + + <note> + <title>Experimental</title> + <para>This is an <link linkend="experimental">experimental</link> + interface and may change in the future.</para> + </note> + + <para>To retrieve the current crop rectangle applications set the + <structfield>pad</structfield> field of a &v4l2-subdev-crop; to the + desired pad number as reported by the media API and the + <structfield>which</structfield> field to + <constant>V4L2_SUBDEV_FORMAT_ACTIVE</constant>. They then call the + <constant>VIDIOC_SUBDEV_G_CROP</constant> ioctl with a pointer to this + structure. The driver fills the members of the <structfield>rect</structfield> + field or returns &EINVAL; if the input arguments are invalid, or if cropping + is not supported on the given pad.</para> + + <para>To change the current crop rectangle applications set both the + <structfield>pad</structfield> and <structfield>which</structfield> fields + and all members of the <structfield>rect</structfield> field. They then call + the <constant>VIDIOC_SUBDEV_S_CROP</constant> ioctl with a pointer to this + structure. The driver verifies the requested crop rectangle, adjusts it + based on the hardware capabilities and configures the device. Upon return + the &v4l2-subdev-crop; contains the current format as would be returned + by a <constant>VIDIOC_SUBDEV_G_CROP</constant> call.</para> + + <para>Applications can query the device capabilities by setting the + <structfield>which</structfield> to + <constant>V4L2_SUBDEV_FORMAT_TRY</constant>. When set, 'try' crop + rectangles are not applied to the device by the driver, but are mangled + exactly as active crop rectangles and stored in the sub-device file handle. + Two applications querying the same sub-device would thus not interact with + each other.</para> + + <para>Drivers must not return an error solely because the requested crop + rectangle doesn't match the device capabilities. They must instead modify + the rectangle to match what the hardware can provide. The modified format + should be as close as possible to the original request.</para> + + <table pgwide="1" frame="none" id="v4l2-subdev-crop"> + <title>struct <structname>v4l2_subdev_crop</structname></title> + <tgroup cols="3"> + &cs-str; + <tbody valign="top"> + <row> + <entry>__u32</entry> + <entry><structfield>pad</structfield></entry> + <entry>Pad number as reported by the media framework.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>which</structfield></entry> + <entry>Crop rectangle to get or set, from + &v4l2-subdev-format-whence;.</entry> + </row> + <row> + <entry>&v4l2-rect;</entry> + <entry><structfield>rect</structfield></entry> + <entry>Crop rectangle boundaries, in pixels.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>reserved</structfield>[8]</entry> + <entry>Reserved for future extensions. Applications and drivers must + set the array to zero.</entry> + </row> + </tbody> + </tgroup> + </table> + </refsect1> + + <refsect1> + &return-value; + + <variablelist> + <varlistentry> + <term><errorcode>EBUSY</errorcode></term> + <listitem> + <para>The crop rectangle can't be changed because the pad is currently + busy. This can be caused, for instance, by an active video stream on + the pad. The ioctl must not be retried without performing another + action to fix the problem first. Only returned by + <constant>VIDIOC_SUBDEV_S_CROP</constant></para> + </listitem> + </varlistentry> + <varlistentry> + <term><errorcode>EINVAL</errorcode></term> + <listitem> + <para>The &v4l2-subdev-crop; <structfield>pad</structfield> + references a non-existing pad, the <structfield>which</structfield> + field references a non-existing format, or cropping is not supported + on the given subdev pad.</para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> +</refentry> diff --git a/Documentation/DocBook/v4l/vidioc-subdev-g-fmt.xml b/Documentation/DocBook/v4l/vidioc-subdev-g-fmt.xml new file mode 100644 index 000000000000..f367c570c530 --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-subdev-g-fmt.xml @@ -0,0 +1,180 @@ +<refentry id="vidioc-subdev-g-fmt"> + <refmeta> + <refentrytitle>ioctl VIDIOC_SUBDEV_G_FMT, VIDIOC_SUBDEV_S_FMT</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>VIDIOC_SUBDEV_G_FMT</refname> + <refname>VIDIOC_SUBDEV_S_FMT</refname> + <refpurpose>Get or set the data format on a subdev pad</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcprototype> + <funcdef>int <function>ioctl</function></funcdef> + <paramdef>int <parameter>fd</parameter></paramdef> + <paramdef>int <parameter>request</parameter></paramdef> + <paramdef>struct v4l2_subdev_format *<parameter>argp</parameter> + </paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Arguments</title> + + <variablelist> + <varlistentry> + <term><parameter>fd</parameter></term> + <listitem> + <para>&fd;</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>request</parameter></term> + <listitem> + <para>VIDIOC_SUBDEV_G_FMT, VIDIOC_SUBDEV_S_FMT</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>argp</parameter></term> + <listitem> + <para></para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + + <refsect1> + <title>Description</title> + + <note> + <title>Experimental</title> + <para>This is an <link linkend="experimental">experimental</link> + interface and may change in the future.</para> + </note> + + <para>These ioctls are used to negotiate the frame format at specific + subdev pads in the image pipeline.</para> + + <para>To retrieve the current format applications set the + <structfield>pad</structfield> field of a &v4l2-subdev-format; to the + desired pad number as reported by the media API and the + <structfield>which</structfield> field to + <constant>V4L2_SUBDEV_FORMAT_ACTIVE</constant>. When they call the + <constant>VIDIOC_SUBDEV_G_FMT</constant> ioctl with a pointer to this + structure the driver fills the members of the <structfield>format</structfield> + field.</para> + + <para>To change the current format applications set both the + <structfield>pad</structfield> and <structfield>which</structfield> fields + and all members of the <structfield>format</structfield> field. When they + call the <constant>VIDIOC_SUBDEV_S_FMT</constant> ioctl with a pointer to this + structure the driver verifies the requested format, adjusts it based on the + hardware capabilities and configures the device. Upon return the + &v4l2-subdev-format; contains the current format as would be returned by a + <constant>VIDIOC_SUBDEV_G_FMT</constant> call.</para> + + <para>Applications can query the device capabilities by setting the + <structfield>which</structfield> to + <constant>V4L2_SUBDEV_FORMAT_TRY</constant>. When set, 'try' formats are not + applied to the device by the driver, but are changed exactly as active + formats and stored in the sub-device file handle. Two applications querying + the same sub-device would thus not interact with each other.</para> + + <para>For instance, to try a format at the output pad of a sub-device, + applications would first set the try format at the sub-device input with the + <constant>VIDIOC_SUBDEV_S_FMT</constant> ioctl. They would then either + retrieve the default format at the output pad with the + <constant>VIDIOC_SUBDEV_G_FMT</constant> ioctl, or set the desired output + pad format with the <constant>VIDIOC_SUBDEV_S_FMT</constant> ioctl and check + the returned value.</para> + + <para>Try formats do not depend on active formats, but can depend on the + current links configuration or sub-device controls value. For instance, a + low-pass noise filter might crop pixels at the frame boundaries, modifying + its output frame size.</para> + + <para>Drivers must not return an error solely because the requested format + doesn't match the device capabilities. They must instead modify the format + to match what the hardware can provide. The modified format should be as + close as possible to the original request.</para> + + <table pgwide="1" frame="none" id="v4l2-subdev-format"> + <title>struct <structname>v4l2_subdev_format</structname></title> + <tgroup cols="3"> + &cs-str; + <tbody valign="top"> + <row> + <entry>__u32</entry> + <entry><structfield>pad</structfield></entry> + <entry>Pad number as reported by the media controller API.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>which</structfield></entry> + <entry>Format to modified, from &v4l2-subdev-format-whence;.</entry> + </row> + <row> + <entry>&v4l2-mbus-framefmt;</entry> + <entry><structfield>format</structfield></entry> + <entry>Definition of an image format, see <xref + linkend="v4l2-mbus-framefmt" /> for details.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>reserved</structfield>[8]</entry> + <entry>Reserved for future extensions. Applications and drivers must + set the array to zero.</entry> + </row> + </tbody> + </tgroup> + </table> + + <table pgwide="1" frame="none" id="v4l2-subdev-format-whence"> + <title>enum <structname>v4l2_subdev_format_whence</structname></title> + <tgroup cols="3"> + &cs-def; + <tbody valign="top"> + <row> + <entry>V4L2_SUBDEV_FORMAT_TRY</entry> + <entry>0</entry> + <entry>Try formats, used for querying device capabilities.</entry> + </row> + <row> + <entry>V4L2_SUBDEV_FORMAT_ACTIVE</entry> + <entry>1</entry> + <entry>Active formats, applied to the hardware.</entry> + </row> + </tbody> + </tgroup> + </table> + </refsect1> + + <refsect1> + &return-value; + + <variablelist> + <varlistentry> + <term><errorcode>EBUSY</errorcode></term> + <listitem> + <para>The format can't be changed because the pad is currently busy. + This can be caused, for instance, by an active video stream on the + pad. The ioctl must not be retried without performing another action + to fix the problem first. Only returned by + <constant>VIDIOC_SUBDEV_S_FMT</constant></para> + </listitem> + </varlistentry> + <varlistentry> + <term><errorcode>EINVAL</errorcode></term> + <listitem> + <para>The &v4l2-subdev-format; <structfield>pad</structfield> + references a non-existing pad, or the <structfield>which</structfield> + field references a non-existing format.</para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> +</refentry> diff --git a/Documentation/DocBook/v4l/vidioc-subdev-g-frame-interval.xml b/Documentation/DocBook/v4l/vidioc-subdev-g-frame-interval.xml new file mode 100644 index 000000000000..0bc3ea22d31f --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-subdev-g-frame-interval.xml @@ -0,0 +1,141 @@ +<refentry id="vidioc-subdev-g-frame-interval"> + <refmeta> + <refentrytitle>ioctl VIDIOC_SUBDEV_G_FRAME_INTERVAL, VIDIOC_SUBDEV_S_FRAME_INTERVAL</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>VIDIOC_SUBDEV_G_FRAME_INTERVAL</refname> + <refname>VIDIOC_SUBDEV_S_FRAME_INTERVAL</refname> + <refpurpose>Get or set the frame interval on a subdev pad</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcprototype> + <funcdef>int <function>ioctl</function></funcdef> + <paramdef>int <parameter>fd</parameter></paramdef> + <paramdef>int <parameter>request</parameter></paramdef> + <paramdef>struct v4l2_subdev_frame_interval *<parameter>argp</parameter> + </paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Arguments</title> + + <variablelist> + <varlistentry> + <term><parameter>fd</parameter></term> + <listitem> + <para>&fd;</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>request</parameter></term> + <listitem> + <para>VIDIOC_SUBDEV_G_FRAME_INTERVAL, VIDIOC_SUBDEV_S_FRAME_INTERVAL</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>argp</parameter></term> + <listitem> + <para></para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + + <refsect1> + <title>Description</title> + + <note> + <title>Experimental</title> + <para>This is an <link linkend="experimental">experimental</link> + interface and may change in the future.</para> + </note> + + <para>These ioctls are used to get and set the frame interval at specific + subdev pads in the image pipeline. The frame interval only makes sense for + sub-devices that can control the frame period on their own. This includes, + for instance, image sensors and TV tuners. Sub-devices that don't support + frame intervals must not implement these ioctls.</para> + + <para>To retrieve the current frame interval applications set the + <structfield>pad</structfield> field of a &v4l2-subdev-frame-interval; to + the desired pad number as reported by the media controller API. When they + call the <constant>VIDIOC_SUBDEV_G_FRAME_INTERVAL</constant> ioctl with a + pointer to this structure the driver fills the members of the + <structfield>interval</structfield> field.</para> + + <para>To change the current frame interval applications set both the + <structfield>pad</structfield> field and all members of the + <structfield>interval</structfield> field. When they call the + <constant>VIDIOC_SUBDEV_S_FRAME_INTERVAL</constant> ioctl with a pointer to + this structure the driver verifies the requested interval, adjusts it based + on the hardware capabilities and configures the device. Upon return the + &v4l2-subdev-frame-interval; contains the current frame interval as would be + returned by a <constant>VIDIOC_SUBDEV_G_FRAME_INTERVAL</constant> call. + </para> + + <para>Drivers must not return an error solely because the requested interval + doesn't match the device capabilities. They must instead modify the interval + to match what the hardware can provide. The modified interval should be as + close as possible to the original request.</para> + + <para>Sub-devices that support the frame interval ioctls should implement + them on a single pad only. Their behaviour when supported on multiple pads + of the same sub-device is not defined.</para> + + <table pgwide="1" frame="none" id="v4l2-subdev-frame-interval"> + <title>struct <structname>v4l2_subdev_frame_interval</structname></title> + <tgroup cols="3"> + &cs-str; + <tbody valign="top"> + <row> + <entry>__u32</entry> + <entry><structfield>pad</structfield></entry> + <entry>Pad number as reported by the media controller API.</entry> + </row> + <row> + <entry>&v4l2-fract;</entry> + <entry><structfield>interval</structfield></entry> + <entry>Period, in seconds, between consecutive video frames.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>reserved</structfield>[9]</entry> + <entry>Reserved for future extensions. Applications and drivers must + set the array to zero.</entry> + </row> + </tbody> + </tgroup> + </table> + </refsect1> + + <refsect1> + &return-value; + + <variablelist> + <varlistentry> + <term><errorcode>EBUSY</errorcode></term> + <listitem> + <para>The frame interval can't be changed because the pad is currently + busy. This can be caused, for instance, by an active video stream on + the pad. The ioctl must not be retried without performing another + action to fix the problem first. Only returned by + <constant>VIDIOC_SUBDEV_S_FRAME_INTERVAL</constant></para> + </listitem> + </varlistentry> + <varlistentry> + <term><errorcode>EINVAL</errorcode></term> + <listitem> + <para>The &v4l2-subdev-frame-interval; <structfield>pad</structfield> + references a non-existing pad, or the pad doesn't support frame + intervals.</para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> +</refentry> diff --git a/Documentation/DocBook/writing-an-alsa-driver.tmpl b/Documentation/DocBook/writing-an-alsa-driver.tmpl index 0ba149de2608..58ced2346e67 100644 --- a/Documentation/DocBook/writing-an-alsa-driver.tmpl +++ b/Documentation/DocBook/writing-an-alsa-driver.tmpl @@ -4784,7 +4784,7 @@ struct _snd_pcm_runtime { FM registers can be directly accessed through the direct-FM API, defined in <filename><sound/asound_fm.h></filename>. In ALSA native mode, FM registers are accessed through - the Hardware-Dependant Device direct-FM extension API, whereas in + the Hardware-Dependent Device direct-FM extension API, whereas in OSS compatible mode, FM registers can be accessed with the OSS direct-FM compatible API in <filename>/dev/dmfmX</filename> device. </para> diff --git a/Documentation/PCI/MSI-HOWTO.txt b/Documentation/PCI/MSI-HOWTO.txt index dcf7acc720e1..3f5e0b09bed5 100644 --- a/Documentation/PCI/MSI-HOWTO.txt +++ b/Documentation/PCI/MSI-HOWTO.txt @@ -253,8 +253,8 @@ In constrast, MSI is restricted to a maximum of 32 interrupts (and must be a power of two). In addition, the MSI interrupt vectors must be allocated consecutively, so the system may not be able to allocate as many vectors for MSI as it could for MSI-X. On some platforms, MSI -interrupts must all be targetted at the same set of CPUs whereas MSI-X -interrupts can all be targetted at different CPUs. +interrupts must all be targeted at the same set of CPUs whereas MSI-X +interrupts can all be targeted at different CPUs. 4.5.2 Spinlocks diff --git a/Documentation/SecurityBugs b/Documentation/SecurityBugs index 26c3b3635d9f..a660d494c8ed 100644 --- a/Documentation/SecurityBugs +++ b/Documentation/SecurityBugs @@ -28,7 +28,7 @@ expect these delays to be short, measurable in days, not weeks or months. A disclosure date is negotiated by the security team working with the bug submitter as well as vendors. However, the kernel security team holds the final say when setting a disclosure date. The timeframe for -disclosure is from immediate (esp. if it's already publically known) +disclosure is from immediate (esp. if it's already publicly known) to a few weeks. As a basic default policy, we expect report date to disclosure date to be on the order of 7 days. diff --git a/Documentation/SubmittingDrivers b/Documentation/SubmittingDrivers index 38d2aab59cac..319baa8b60dd 100644 --- a/Documentation/SubmittingDrivers +++ b/Documentation/SubmittingDrivers @@ -101,7 +101,7 @@ PM support: Since Linux is used on many portable and desktop systems, your complete overview of the power management issues related to drivers see Documentation/power/devices.txt . -Control: In general if there is active maintainance of a driver by +Control: In general if there is active maintenance of a driver by the author then patches will be redirected to them unless they are totally obvious and without need of checking. If you want to be the contact and update point for the diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index 689e2371095c..e439cd0d3375 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -729,7 +729,7 @@ Linus Torvalds's mail on the canonical patch format: <http://lkml.org/lkml/2005/4/7/183> Andi Kleen, "On submitting kernel patches" - Some strategies to get difficult or controversal changes in. + Some strategies to get difficult or controversial changes in. http://halobates.de/on-submitting-patches.pdf -- diff --git a/Documentation/acpi/apei/output_format.txt b/Documentation/acpi/apei/output_format.txt index 9146952c612a..0c49c197c47a 100644 --- a/Documentation/acpi/apei/output_format.txt +++ b/Documentation/acpi/apei/output_format.txt @@ -92,6 +92,11 @@ vendor_id: <integer>, device_id: <integer> class_code: <integer>] [serial number: <integer>, <integer>] [bridge: secondary_status: <integer>, control: <integer>] +[aer_status: <integer>, aer_mask: <integer> +<aer status string> +[aer_uncor_severity: <integer>] +aer_layer=<aer layer string>, aer_agent=<aer agent string> +aer_tlp_header: <integer> <integer> <integer> <integer>] <pcie port type string>* := PCIe end point | legacy PCI end point | \ unknown | unknown | root port | upstream switch port | \ @@ -99,6 +104,26 @@ downstream switch port | PCIe to PCI/PCI-X bridge | \ PCI/PCI-X to PCIe bridge | root complex integrated endpoint device | \ root complex event collector +if section severity is fatal or recoverable +<aer status string># := +unknown | unknown | unknown | unknown | Data Link Protocol | \ +unknown | unknown | unknown | unknown | unknown | unknown | unknown | \ +Poisoned TLP | Flow Control Protocol | Completion Timeout | \ +Completer Abort | Unexpected Completion | Receiver Overflow | \ +Malformed TLP | ECRC | Unsupported Request +else +<aer status string># := +Receiver Error | unknown | unknown | unknown | unknown | unknown | \ +Bad TLP | Bad DLLP | RELAY_NUM Rollover | unknown | unknown | unknown | \ +Replay Timer Timeout | Advisory Non-Fatal +fi + +<aer layer string> := +Physical Layer | Data Link Layer | Transaction Layer + +<aer agent string> := +Receiver ID | Requester ID | Completer ID | Transmitter ID + Where, [] designate corresponding content is optional All <field string> description with * has the following format: diff --git a/Documentation/arm/IXP4xx b/Documentation/arm/IXP4xx index 133c5fa6c7a1..7b9351f2f555 100644 --- a/Documentation/arm/IXP4xx +++ b/Documentation/arm/IXP4xx @@ -36,7 +36,7 @@ Linux currently supports the following features on the IXP4xx chips: - Timers (watchdog, OS) The following components of the chips are not supported by Linux and -require the use of Intel's propietary CSR softare: +require the use of Intel's proprietary CSR softare: - USB device interface - Network interfaces (HSS, Utopia, NPEs, etc) @@ -47,7 +47,7 @@ software from: http://developer.intel.com/design/network/products/npfamily/ixp425.htm -DO NOT POST QUESTIONS TO THE LINUX MAILING LISTS REGARDING THE PROPIETARY +DO NOT POST QUESTIONS TO THE LINUX MAILING LISTS REGARDING THE PROPRIETARY SOFTWARE. There are several websites that provide directions/pointers on using diff --git a/Documentation/arm/Samsung-S3C24XX/Suspend.txt b/Documentation/arm/Samsung-S3C24XX/Suspend.txt index 7edd0e2e6c5b..1ca63b3e5635 100644 --- a/Documentation/arm/Samsung-S3C24XX/Suspend.txt +++ b/Documentation/arm/Samsung-S3C24XX/Suspend.txt @@ -116,7 +116,7 @@ Configuration Allows the entire memory to be checksummed before and after the suspend to see if there has been any corruption of the contents. - Note, the time to calculate the CRC is dependant on the CPU speed + Note, the time to calculate the CRC is dependent on the CPU speed and the size of memory. For an 64Mbyte RAM area on an 200MHz S3C2410, this can take approximately 4 seconds to complete. diff --git a/Documentation/arm/Samsung/GPIO.txt b/Documentation/arm/Samsung/GPIO.txt index 05850c62abeb..513f2562c1a3 100644 --- a/Documentation/arm/Samsung/GPIO.txt +++ b/Documentation/arm/Samsung/GPIO.txt @@ -5,7 +5,7 @@ Introduction ------------ This outlines the Samsung GPIO implementation and the architecture -specfic calls provided alongisde the drivers/gpio core. +specific calls provided alongisde the drivers/gpio core. S3C24XX (Legacy) diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt index b9a83dd24732..c6d84cfd2f56 100644 --- a/Documentation/block/biodoc.txt +++ b/Documentation/block/biodoc.txt @@ -497,7 +497,7 @@ The scatter gather list is in the form of an array of <page, offset, len> entries with their corresponding dma address mappings filled in at the appropriate time. As an optimization, contiguous physical pages can be covered by a single entry where <page> refers to the first page and <len> -covers the range of pages (upto 16 contiguous pages could be covered this +covers the range of pages (up to 16 contiguous pages could be covered this way). There is a helper routine (blk_rq_map_sg) which drivers can use to build the sg list. @@ -565,7 +565,7 @@ struct request { . int tag; /* command tag associated with request */ void *special; /* same as before */ - char *buffer; /* valid only for low memory buffers upto + char *buffer; /* valid only for low memory buffers up to current_nr_sectors */ . . @@ -963,11 +963,6 @@ elevator_dispatch_fn* fills the dispatch queue with ready requests. elevator_add_req_fn* called to add a new request into the scheduler -elevator_queue_empty_fn returns true if the merge queue is empty. - Drivers shouldn't use this, but rather check - if elv_next_request is NULL (without losing the - request if one exists!) - elevator_former_req_fn elevator_latter_req_fn These return the request before or after the one specified in disk sort order. Used by the diff --git a/Documentation/cgroups/blkio-controller.txt b/Documentation/cgroups/blkio-controller.txt index 4ed7b5ceeed2..465351d4cf85 100644 --- a/Documentation/cgroups/blkio-controller.txt +++ b/Documentation/cgroups/blkio-controller.txt @@ -140,7 +140,7 @@ Proportional weight policy files - Specifies per cgroup weight. This is default weight of the group on all the devices until and unless overridden by per device rule. (See blkio.weight_device). - Currently allowed range of weights is from 100 to 1000. + Currently allowed range of weights is from 10 to 1000. - blkio.weight_device - One can specify per cgroup per device rules using this interface. @@ -343,34 +343,6 @@ Common files among various policies CFQ sysfs tunable ================= -/sys/block/<disk>/queue/iosched/group_isolation ------------------------------------------------ - -If group_isolation=1, it provides stronger isolation between groups at the -expense of throughput. By default group_isolation is 0. In general that -means that if group_isolation=0, expect fairness for sequential workload -only. Set group_isolation=1 to see fairness for random IO workload also. - -Generally CFQ will put random seeky workload in sync-noidle category. CFQ -will disable idling on these queues and it does a collective idling on group -of such queues. Generally these are slow moving queues and if there is a -sync-noidle service tree in each group, that group gets exclusive access to -disk for certain period. That means it will bring the throughput down if -group does not have enough IO to drive deeper queue depths and utilize disk -capacity to the fullest in the slice allocated to it. But the flip side is -that even a random reader should get better latencies and overall throughput -if there are lots of sequential readers/sync-idle workload running in the -system. - -If group_isolation=0, then CFQ automatically moves all the random seeky queues -in the root group. That means there will be no service differentiation for -that kind of workload. This leads to better throughput as we do collective -idling on root sync-noidle tree. - -By default one should run with group_isolation=0. If that is not sufficient -and one wants stronger isolation between groups, then set group_isolation=1 -but this will come at cost of reduced throughput. - /sys/block/<disk>/queue/iosched/slice_idle ------------------------------------------ On a faster hardware CFQ can be slow, especially with sequential workload. diff --git a/Documentation/cgroups/cgroups.txt b/Documentation/cgroups/cgroups.txt index cbdfb7d9455b..aedf1bd02fdd 100644 --- a/Documentation/cgroups/cgroups.txt +++ b/Documentation/cgroups/cgroups.txt @@ -110,22 +110,22 @@ university server with various users - students, professors, system tasks etc. The resource planning for this server could be along the following lines: - CPU : Top cpuset + CPU : "Top cpuset" / \ CPUSet1 CPUSet2 - | | - (Profs) (Students) + | | + (Professors) (Students) In addition (system tasks) are attached to topcpuset (so that they can run anywhere) with a limit of 20% - Memory : Professors (50%), students (30%), system (20%) + Memory : Professors (50%), Students (30%), system (20%) - Disk : Prof (50%), students (30%), system (20%) + Disk : Professors (50%), Students (30%), system (20%) Network : WWW browsing (20%), Network File System (60%), others (20%) / \ - Prof (15%) students (5%) + Professors (15%) students (5%) Browsers like Firefox/Lynx go into the WWW network class, while (k)nfsd go into NFS network class. diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt index b6ed61c95856..7c163477fcd8 100644 --- a/Documentation/cgroups/memory.txt +++ b/Documentation/cgroups/memory.txt @@ -52,8 +52,10 @@ Brief summary of control files. tasks # attach a task(thread) and show list of threads cgroup.procs # show list of processes cgroup.event_control # an interface for event_fd() - memory.usage_in_bytes # show current memory(RSS+Cache) usage. - memory.memsw.usage_in_bytes # show current memory+Swap usage + memory.usage_in_bytes # show current res_counter usage for memory + (See 5.5 for details) + memory.memsw.usage_in_bytes # show current res_counter usage for memory+Swap + (See 5.5 for details) memory.limit_in_bytes # set/show limit of memory usage memory.memsw.limit_in_bytes # set/show limit of memory+Swap usage memory.failcnt # show the number of memory usage hits limits @@ -453,6 +455,15 @@ memory under it will be reclaimed. You can reset failcnt by writing 0 to failcnt file. # echo 0 > .../memory.failcnt +5.5 usage_in_bytes + +For efficiency, as other kernel components, memory cgroup uses some optimization +to avoid unnecessary cacheline false sharing. usage_in_bytes is affected by the +method and doesn't show 'exact' value of memory(and swap) usage, it's an fuzz +value for efficient access. (Of course, when necessary, it's synchronized.) +If you want to know more exact memory usage, you should use RSS+CACHE(+SWAP) +value in memory.stat(see 5.2). + 6. Hierarchy support The memory controller supports a deep hierarchy and hierarchical accounting. diff --git a/Documentation/cpu-hotplug.txt b/Documentation/cpu-hotplug.txt index 45d5a217484f..a20bfd415e41 100644 --- a/Documentation/cpu-hotplug.txt +++ b/Documentation/cpu-hotplug.txt @@ -196,7 +196,7 @@ the state as 0 when a cpu if offline and 1 when its online. #To display the current cpu state. #cat /sys/devices/system/cpu/cpuX/online -Q: Why cant i remove CPU0 on some systems? +Q: Why can't i remove CPU0 on some systems? A: Some architectures may have some special dependency on a certain CPU. For e.g in IA64 platforms we have ability to sent platform interrupts to the diff --git a/Documentation/dell_rbu.txt b/Documentation/dell_rbu.txt index 15174985ad08..d262e22bddec 100644 --- a/Documentation/dell_rbu.txt +++ b/Documentation/dell_rbu.txt @@ -62,7 +62,7 @@ image file and then arrange all these packets back to back in to one single file. This file is then copied to /sys/class/firmware/dell_rbu/data. Once this file gets to the driver, the driver extracts packet_size data from -the file and spreads it accross the physical memory in contiguous packet_sized +the file and spreads it across the physical memory in contiguous packet_sized space. This method makes sure that all the packets get to the driver in a single operation. diff --git a/Documentation/development-process/1.Intro b/Documentation/development-process/1.Intro index 8cc2cba2b10d..9b614480aa84 100644 --- a/Documentation/development-process/1.Intro +++ b/Documentation/development-process/1.Intro @@ -56,13 +56,13 @@ information on kernel development. 1.2: WHAT THIS DOCUMENT IS ABOUT -The Linux kernel, at over 6 million lines of code and well over 1000 active -contributors, is one of the largest and most active free software projects -in existence. Since its humble beginning in 1991, this kernel has evolved -into a best-of-breed operating system component which runs on pocket-sized -digital music players, desktop PCs, the largest supercomputers in -existence, and all types of systems in between. It is a robust, efficient, -and scalable solution for almost any situation. +The Linux kernel, at over 8 million lines of code and well over 1000 +contributors to each release, is one of the largest and most active free +software projects in existence. Since its humble beginning in 1991, this +kernel has evolved into a best-of-breed operating system component which +runs on pocket-sized digital music players, desktop PCs, the largest +supercomputers in existence, and all types of systems in between. It is a +robust, efficient, and scalable solution for almost any situation. With the growth of Linux has come an increase in the number of developers (and companies) wishing to participate in its development. Hardware @@ -115,7 +115,7 @@ This document was written by Jonathan Corbet, corbet@lwn.net. It has been improved by comments from Johannes Berg, James Berry, Alex Chiang, Roland Dreier, Randy Dunlap, Jake Edge, Jiri Kosina, Matt Mackall, Arthur Marsh, Amanda McPherson, Andrew Morton, Andrew Price, Tsugikazu Shibata, and -Jochen Voß. +Jochen Voß. This work was supported by the Linux Foundation; thanks especially to Amanda McPherson, who saw the value of this effort and made it all happen. @@ -221,7 +221,7 @@ include: - Everything that was said above about code review applies doubly to closed-source code. Since this code is not available at all, it cannot have been reviewed by the community and will, beyond doubt, have serious - problems. + problems. Makers of embedded systems, in particular, may be tempted to disregard much of what has been said in this section in the belief that they are shipping diff --git a/Documentation/development-process/2.Process b/Documentation/development-process/2.Process index 911a45186340..4823577c6509 100644 --- a/Documentation/development-process/2.Process +++ b/Documentation/development-process/2.Process @@ -14,16 +14,15 @@ The kernel developers use a loosely time-based release process, with a new major kernel release happening every two or three months. The recent release history looks like this: - 2.6.26 July 13, 2008 - 2.6.25 April 16, 2008 - 2.6.24 January 24, 2008 - 2.6.23 October 9, 2007 - 2.6.22 July 8, 2007 - 2.6.21 April 25, 2007 - 2.6.20 February 4, 2007 + 2.6.38 March 14, 2011 + 2.6.37 January 4, 2011 + 2.6.36 October 20, 2010 + 2.6.35 August 1, 2010 + 2.6.34 May 15, 2010 + 2.6.33 February 24, 2010 Every 2.6.x release is a major kernel release with new features, internal -API changes, and more. A typical 2.6 release can contain over 10,000 +API changes, and more. A typical 2.6 release can contain nearly 10,000 changesets with changes to several hundred thousand lines of code. 2.6 is thus the leading edge of Linux kernel development; the kernel uses a rolling development model which is continually integrating major changes. @@ -42,13 +41,13 @@ merge window do not come out of thin air; they have been collected, tested, and staged ahead of time. How that process works will be described in detail later on). -The merge window lasts for two weeks. At the end of this time, Linus -Torvalds will declare that the window is closed and release the first of -the "rc" kernels. For the kernel which is destined to be 2.6.26, for -example, the release which happens at the end of the merge window will be -called 2.6.26-rc1. The -rc1 release is the signal that the time to merge -new features has passed, and that the time to stabilize the next kernel has -begun. +The merge window lasts for approximately two weeks. At the end of this +time, Linus Torvalds will declare that the window is closed and release the +first of the "rc" kernels. For the kernel which is destined to be 2.6.40, +for example, the release which happens at the end of the merge window will +be called 2.6.40-rc1. The -rc1 release is the signal that the time to +merge new features has passed, and that the time to stabilize the next +kernel has begun. Over the next six to ten weeks, only patches which fix problems should be submitted to the mainline. On occasion a more significant change will be @@ -66,20 +65,19 @@ will get up to somewhere between -rc6 and -rc9 before the kernel is considered to be sufficiently stable and the final 2.6.x release is made. At that point the whole process starts over again. -As an example, here is how the 2.6.25 development cycle went (all dates in -2008): - - January 24 2.6.24 stable release - February 10 2.6.25-rc1, merge window closes - February 15 2.6.25-rc2 - February 24 2.6.25-rc3 - March 4 2.6.25-rc4 - March 9 2.6.25-rc5 - March 16 2.6.25-rc6 - March 25 2.6.25-rc7 - April 1 2.6.25-rc8 - April 11 2.6.25-rc9 - April 16 2.6.25 stable release +As an example, here is how the 2.6.38 development cycle went (all dates in +2011): + + January 4 2.6.37 stable release + January 18 2.6.38-rc1, merge window closes + January 21 2.6.38-rc2 + February 1 2.6.38-rc3 + February 7 2.6.38-rc4 + February 15 2.6.38-rc5 + February 21 2.6.38-rc6 + March 1 2.6.38-rc7 + March 7 2.6.38-rc8 + March 14 2.6.38 stable release How do the developers decide when to close the development cycle and create the stable release? The most significant metric used is the list of @@ -87,7 +85,7 @@ regressions from previous releases. No bugs are welcome, but those which break systems which worked in the past are considered to be especially serious. For this reason, patches which cause regressions are looked upon unfavorably and are quite likely to be reverted during the stabilization -period. +period. The developers' goal is to fix all known regressions before the stable release is made. In the real world, this kind of perfection is hard to @@ -99,26 +97,34 @@ kernels go out with a handful of known regressions though, hopefully, none of them are serious. Once a stable release is made, its ongoing maintenance is passed off to the -"stable team," currently comprised of Greg Kroah-Hartman and Chris Wright. -The stable team will release occasional updates to the stable release using -the 2.6.x.y numbering scheme. To be considered for an update release, a -patch must (1) fix a significant bug, and (2) already be merged into the -mainline for the next development kernel. Continuing our 2.6.25 example, -the history (as of this writing) is: - - May 1 2.6.25.1 - May 6 2.6.25.2 - May 9 2.6.25.3 - May 15 2.6.25.4 - June 7 2.6.25.5 - June 9 2.6.25.6 - June 16 2.6.25.7 - June 21 2.6.25.8 - June 24 2.6.25.9 - -Stable updates for a given kernel are made for approximately six months; -after that, the maintenance of stable releases is solely the responsibility -of the distributors which have shipped that particular kernel. +"stable team," currently consisting of Greg Kroah-Hartman. The stable team +will release occasional updates to the stable release using the 2.6.x.y +numbering scheme. To be considered for an update release, a patch must (1) +fix a significant bug, and (2) already be merged into the mainline for the +next development kernel. Kernels will typically receive stable updates for +a little more than one development cycle past their initial release. So, +for example, the 2.6.36 kernel's history looked like: + + October 10 2.6.36 stable release + November 22 2.6.36.1 + December 9 2.6.36.2 + January 7 2.6.36.3 + February 17 2.6.36.4 + +2.6.36.4 was the final stable update for the 2.6.36 release. + +Some kernels are designated "long term" kernels; they will receive support +for a longer period. As of this writing, the current long term kernels +and their maintainers are: + + 2.6.27 Willy Tarreau (Deep-frozen stable kernel) + 2.6.32 Greg Kroah-Hartman + 2.6.35 Andi Kleen (Embedded flag kernel) + +The selection of a kernel for long-term support is purely a matter of a +maintainer having the need and the time to maintain that release. There +are no known plans for long-term support for any specific upcoming +release. 2.2: THE LIFECYCLE OF A PATCH @@ -130,7 +136,7 @@ each patch implements a change which is desirable to have in the mainline. This process can happen quickly for minor fixes, or, in the case of large and controversial changes, go on for years. Much developer frustration comes from a lack of understanding of this process or from attempts to -circumvent it. +circumvent it. In the hopes of reducing that frustration, this document will describe how a patch gets into the kernel. What follows below is an introduction which @@ -193,8 +199,8 @@ involved. 2.3: HOW PATCHES GET INTO THE KERNEL There is exactly one person who can merge patches into the mainline kernel -repository: Linus Torvalds. But, of the over 12,000 patches which went -into the 2.6.25 kernel, only 250 (around 2%) were directly chosen by Linus +repository: Linus Torvalds. But, of the over 9,500 patches which went +into the 2.6.38 kernel, only 112 (around 1.3%) were directly chosen by Linus himself. The kernel project has long since grown to a size where no single developer could possibly inspect and select every patch unassisted. The way the kernel developers have addressed this growth is through the use of @@ -229,7 +235,7 @@ first in trees dedicated to network device drivers, wireless networking, etc. This chain of repositories can be arbitrarily long, though it rarely exceeds two or three links. Since each maintainer in the chain trusts those managing lower-level trees, this process is known as the "chain of -trust." +trust." Clearly, in a system like this, getting patches into the kernel depends on finding the right maintainer. Sending patches directly to Linus is not @@ -254,7 +260,7 @@ The answer comes in the form of -next trees, where subsystem trees are collected for testing and review. The older of these trees, maintained by Andrew Morton, is called "-mm" (for memory management, which is how it got started). The -mm tree integrates patches from a long list of subsystem -trees; it also has some patches aimed at helping with debugging. +trees; it also has some patches aimed at helping with debugging. Beyond that, -mm contains a significant collection of patches which have been selected by Andrew directly. These patches may have been posted on a @@ -264,8 +270,8 @@ subsystem tree of last resort; if there is no other obvious path for a patch into the mainline, it is likely to end up in -mm. Miscellaneous patches which accumulate in -mm will eventually either be forwarded on to an appropriate subsystem tree or be sent directly to Linus. In a typical -development cycle, approximately 10% of the patches going into the mainline -get there via -mm. +development cycle, approximately 5-10% of the patches going into the +mainline get there via -mm. The current -mm patch is available in the "mmotm" (-mm of the moment) directory at: @@ -275,7 +281,7 @@ directory at: Use of the MMOTM tree is likely to be a frustrating experience, though; there is a definite chance that it will not even compile. -The other -next tree, started more recently, is linux-next, maintained by +The primary tree for next-cycle patch merging is linux-next, maintained by Stephen Rothwell. The linux-next tree is, by design, a snapshot of what the mainline is expected to look like after the next merge window closes. Linux-next trees are announced on the linux-kernel and linux-next mailing @@ -287,25 +293,14 @@ Some information about linux-next has been gathered at: http://linux.f-seidel.de/linux-next/pmwiki/ -How the linux-next tree will fit into the development process is still -changing. As of this writing, the first full development cycle involving -linux-next (2.6.26) is coming to an end; thus far, it has proved to be a -valuable resource for finding and fixing integration problems before the -beginning of the merge window. See http://lwn.net/Articles/287155/ for -more information on how linux-next has worked to set up the 2.6.27 merge -window. - -Some developers have begun to suggest that linux-next should be used as the -target for future development as well. The linux-next tree does tend to be -far ahead of the mainline and is more representative of the tree into which -any new work will be merged. The downside to this idea is that the -volatility of linux-next tends to make it a difficult development target. -See http://lwn.net/Articles/289013/ for more information on this topic, and -stay tuned; much is still in flux where linux-next is involved. +Linux-next has become an integral part of the kernel development process; +all patches merged during a given merge window should really have found +their way into linux-next some time before the merge window opens. + 2.4.1: STAGING TREES -The kernel source tree now contains the drivers/staging/ directory, where +The kernel source tree contains the drivers/staging/ directory, where many sub-directories for drivers or filesystems that are on their way to being added to the kernel tree live. They remain in drivers/staging while they still need more work; once complete, they can be moved into the @@ -313,15 +308,23 @@ kernel proper. This is a way to keep track of drivers that aren't up to Linux kernel coding or quality standards, but people may want to use them and track development. -Greg Kroah-Hartman currently (as of 2.6.36) maintains the staging tree. -Drivers that still need work are sent to him, with each driver having -its own subdirectory in drivers/staging/. Along with the driver source -files, a TODO file should be present in the directory as well. The TODO -file lists the pending work that the driver needs for acceptance into -the kernel proper, as well as a list of people that should be Cc'd for any -patches to the driver. Staging drivers that don't currently build should -have their config entries depend upon CONFIG_BROKEN. Once they can -be successfully built without outside patches, CONFIG_BROKEN can be removed. +Greg Kroah-Hartman currently maintains the staging tree. Drivers that +still need work are sent to him, with each driver having its own +subdirectory in drivers/staging/. Along with the driver source files, a +TODO file should be present in the directory as well. The TODO file lists +the pending work that the driver needs for acceptance into the kernel +proper, as well as a list of people that should be Cc'd for any patches to +the driver. Current rules require that drivers contributed to staging +must, at a minimum, compile properly. + +Staging can be a relatively easy way to get new drivers into the mainline +where, with luck, they will come to the attention of other developers and +improve quickly. Entry into staging is not the end of the story, though; +code in staging which is not seeing regular progress will eventually be +removed. Distributors also tend to be relatively reluctant to enable +staging drivers. So staging is, at best, a stop on the way toward becoming +a proper mainline driver. + 2.5: TOOLS @@ -347,11 +350,7 @@ page at: http://git-scm.com/ -That page has pointers to documentation and tutorials. One should be -aware, in particular, of the Kernel Hacker's Guide to git, which has -information specific to kernel development: - - http://linux.yyz.us/git-howto.html +That page has pointers to documentation and tutorials. Among the kernel developers who do not use git, the most popular choice is almost certainly Mercurial: @@ -408,7 +407,7 @@ There are a few hints which can help with linux-kernel survival: important to filter on both the topic of interest (though note that long-running conversations can drift away from the original subject without changing the email subject line) and the people who are - participating. + participating. - Do not feed the trolls. If somebody is trying to stir up an angry response, ignore them. diff --git a/Documentation/development-process/3.Early-stage b/Documentation/development-process/3.Early-stage index 307a159a70ca..f87ba7b3fbac 100644 --- a/Documentation/development-process/3.Early-stage +++ b/Documentation/development-process/3.Early-stage @@ -110,8 +110,8 @@ the kernel community's standards. Some examples include: - The AppArmor security module made use of internal virtual filesystem data structures in ways which were considered to be unsafe and - unreliable. This code has since been significantly reworked, but - remains outside of the mainline. + unreliable. This concern (among others) kept AppArmor out of the + mainline for years. In each of these cases, a great deal of pain and extra work could have been avoided with some early discussion with the kernel developers. @@ -138,6 +138,19 @@ patches, and who, if anybody, is attaching Signed-off-by lines to those patches. Those are the people who will be best placed to help with a new development project. +The task of finding the right maintainer is sometimes challenging enough +that the kernel developers have added a script to ease the process: + + .../scripts/get_maintainer.pl + +This script will return the current maintainer(s) for a given file or +directory when given the "-f" option. If passed a patch on the +command line, it will list the maintainers who should probably receive +copies of the patch. There are a number of options regulating how hard +get_maintainer.pl will search for maintainers; please be careful about +using the more aggressive options as you may end up including developers +who have no real interest in the code you are modifying. + If all else fails, talking to Andrew Morton can be an effective way to track down a maintainer for a specific piece of code. @@ -155,11 +168,15 @@ reaction, but, instead, little or no reaction at all. The sad truth of the matter is (1) kernel developers tend to be busy, (2) there is no shortage of people with grand plans and little code (or even prospect of code) to back them up, and (3) nobody is obligated to review or comment on ideas -posted by others. If a request-for-comments posting yields little in the -way of comments, do not assume that it means there is no interest in the -project. Unfortunately, you also cannot assume that there are no problems -with your idea. The best thing to do in this situation is to proceed, -keeping the community informed as you go. +posted by others. Beyond that, high-level designs often hide problems +which are only reviewed when somebody actually tries to implement those +designs; for that reason, kernel developers would rather see the code. + +If a request-for-comments posting yields little in the way of comments, do +not assume that it means there is no interest in the project. +Unfortunately, you also cannot assume that there are no problems with your +idea. The best thing to do in this situation is to proceed, keeping the +community informed as you go. 3.5: GETTING OFFICIAL BUY-IN diff --git a/Documentation/development-process/4.Coding b/Documentation/development-process/4.Coding index 2278693c8ffa..f3f1a469443c 100644 --- a/Documentation/development-process/4.Coding +++ b/Documentation/development-process/4.Coding @@ -131,6 +131,11 @@ classic time/space tradeoff taught in beginning data structures classes often does not apply to contemporary hardware. Space *is* time, in that a larger program will run slower than one which is more compact. +More recent compilers take an increasingly active role in deciding whether +a given function should actually be inlined or not. So the liberal +placement of "inline" keywords may not just be excessive; it could also be +irrelevant. + * Locking @@ -285,6 +290,13 @@ be found at https://sparse.wiki.kernel.org/index.php/Main_Page if your distributor does not package it); it can then be run on the code by adding "C=1" to your make command. +The "Coccinelle" tool (http://coccinelle.lip6.fr/) is able to find a wide +variety of potential coding problems; it can also propose fixes for those +problems. Quite a few "semantic patches" for the kernel have been packaged +under the scripts/coccinelle directory; running "make coccicheck" will run +through those semantic patches and report on any problems found. See +Documentation/coccinelle.txt for more information. + Other kinds of portability errors are best found by compiling your code for other architectures. If you do not happen to have an S/390 system or a Blackfin development board handy, you can still perform the compilation @@ -308,7 +320,9 @@ The first piece of documentation for any patch is its associated changelog. Log entries should describe the problem being solved, the form of the solution, the people who worked on the patch, any relevant effects on performance, and anything else that might be needed to -understand the patch. +understand the patch. Be sure that the changelog says *why* the patch is +worth applying; a surprising number of developers fail to provide that +information. Any code which adds a new user-space interface - including new sysfs or /proc files - should include documentation of that interface which enables @@ -321,7 +335,7 @@ boot-time parameters. Any patch which adds new parameters should add the appropriate entries to this file. Any new configuration options must be accompanied by help text which -clearly explains the options and when the user might want to select them. +clearly explains the options and when the user might want to select them. Internal API information for many subsystems is documented by way of specially-formatted comments; these comments can be extracted and formatted @@ -372,7 +386,8 @@ which is broken by the change. For a widely-used function, this duty can lead to literally hundreds or thousands of changes - many of which are likely to conflict with work being done by other developers. Needless to say, this can be a large job, so it is best to be sure that the -justification is solid. +justification is solid. Note that the Coccinelle tool can help with +wide-ranging API changes. When making an incompatible API change, one should, whenever possible, ensure that code which has not been updated is caught by the compiler. diff --git a/Documentation/development-process/5.Posting b/Documentation/development-process/5.Posting index f622c1e9f0f9..903a2546f138 100644 --- a/Documentation/development-process/5.Posting +++ b/Documentation/development-process/5.Posting @@ -60,12 +60,15 @@ even in the short term. Patches must be prepared against a specific version of the kernel. As a general rule, a patch should be based on the current mainline as found in -Linus's git tree. It may become necessary to make versions against -mm, -linux-next, or a subsystem tree, though, to facilitate wider testing and -review. Depending on the area of your patch and what is going on -elsewhere, basing a patch against these other trees can require a -significant amount of work resolving conflicts and dealing with API -changes. +Linus's git tree. When basing on mainline, start with a well-known release +point - a stable or -rc release - rather than branching off the mainline at +an arbitrary spot. + +It may become necessary to make versions against -mm, linux-next, or a +subsystem tree, though, to facilitate wider testing and review. Depending +on the area of your patch and what is going on elsewhere, basing a patch +against these other trees can require a significant amount of work +resolving conflicts and dealing with API changes. Only the most simple changes should be formatted as a single patch; everything else should be made as a logical series of changes. Splitting @@ -100,11 +103,11 @@ rules of thumb, however, which can help considerably: result is a broken kernel, you will make life harder for developers and users who are engaging in the noble work of tracking down problems. - - Do not overdo it, though. One developer recently posted a set of edits + - Do not overdo it, though. One developer once posted a set of edits to a single file as 500 separate patches - an act which did not make him the most popular person on the kernel mailing list. A single patch can be reasonably large as long as it still contains a single *logical* - change. + change. - It can be tempting to add a whole new infrastructure with a series of patches, but to leave that infrastructure unused until the final patch @@ -162,7 +165,8 @@ To that end, the summary line should describe the effects of and motivation for the change as well as possible given the one-line constraint. The detailed description can then amplify on those topics and provide any needed additional information. If the patch fixes a bug, cite the commit -which introduced the bug if possible. If a problem is associated with +which introduced the bug if possible (and please provide both the commit ID +and the title when citing commits). If a problem is associated with specific log or compiler output, include that output to help others searching for a solution to the same problem. If the change is meant to support other changes coming in later patch, say so. If internal APIs are @@ -230,7 +234,7 @@ take care of: which have had gratuitous white-space changes or line wrapping performed by the mail client will not apply at the other end, and often will not be examined in any detail. If there is any doubt at all, mail the patch - to yourself and convince yourself that it shows up intact. + to yourself and convince yourself that it shows up intact. Documentation/email-clients.txt has some helpful hints on making specific mail clients work for sending patches. @@ -287,7 +291,7 @@ something like: where "nn" is the ordinal number of the patch, "mm" is the total number of patches in the series, and "subsys" is the name of the affected subsystem. -Clearly, nn/mm can be omitted for a single, standalone patch. +Clearly, nn/mm can be omitted for a single, standalone patch. If you have a significant series of patches, it is customary to send an introductory description as part zero. This convention is not universally @@ -299,5 +303,5 @@ In general, the second and following parts of a multi-part patch should be sent as a reply to the first part so that they all thread together at the receiving end. Tools like git and quilt have commands to mail out a set of patches with the proper threading. If you have a long series, though, and -are using git, please provide the --no-chain-reply-to option to avoid +are using git, please stay away from the --chain-reply-to option to avoid creating exceptionally deep nesting. diff --git a/Documentation/development-process/6.Followthrough b/Documentation/development-process/6.Followthrough index a8fba3d83a85..41d324a9420d 100644 --- a/Documentation/development-process/6.Followthrough +++ b/Documentation/development-process/6.Followthrough @@ -66,6 +66,11 @@ be easy to become blinded by your own solution to a problem to the point that you don't realize that something is fundamentally wrong or, perhaps, you're not even solving the right problem. +Andrew Morton has suggested that every review comment which does not result +in a code change should result in an additional code comment instead; that +can help future reviewers avoid the questions which came up the first time +around. + One fatal mistake is to ignore review comments in the hope that they will go away. They will not go away. If you repost code without having responded to the comments you got the time before, you're likely to find @@ -100,7 +105,7 @@ entry into a subsystem maintainer's tree. How that works varies from one subsystem to the next; each maintainer has his or her own way of doing things. In particular, there may be more than one tree - one, perhaps, dedicated to patches planned for the next merge window, and another for -longer-term work. +longer-term work. For patches applying to areas for which there is no obvious subsystem tree (memory management patches, for example), the default tree often ends up @@ -109,11 +114,10 @@ through the -mm tree. Inclusion into a subsystem tree can bring a higher level of visibility to a patch. Now other developers working with that tree will get the patch by -default. Subsystem trees typically feed into -mm and linux-next as well, -making their contents visible to the development community as a whole. At -this point, there's a good chance that you will get more comments from a -new set of reviewers; these comments need to be answered as in the previous -round. +default. Subsystem trees typically feed linux-next as well, making their +contents visible to the development community as a whole. At this point, +there's a good chance that you will get more comments from a new set of +reviewers; these comments need to be answered as in the previous round. What may also happen at this point, depending on the nature of your patch, is that conflicts with work being done by others turn up. In the worst diff --git a/Documentation/development-process/7.AdvancedTopics b/Documentation/development-process/7.AdvancedTopics index 837179447e17..26dc3fa196e4 100644 --- a/Documentation/development-process/7.AdvancedTopics +++ b/Documentation/development-process/7.AdvancedTopics @@ -119,7 +119,7 @@ can affect your ability to get trees pulled in the future. Quoting Linus: to trust things *without* then having to go and check every individual change by hand. -(http://lwn.net/Articles/224135/). +(http://lwn.net/Articles/224135/). To avoid this kind of situation, ensure that all patches within a given branch stick closely to the associated topic; a "driver fixes" branch @@ -138,7 +138,7 @@ When requesting a pull, be sure to give all the relevant information: where your tree is, what branch to pull, and what changes will result from the pull. The git request-pull command can be helpful in this regard; it will format the request as other developers expect, and will also check to be -sure that you have remembered to push those changes to the public server. +sure that you have remembered to push those changes to the public server. 7.2: REVIEWING PATCHES diff --git a/Documentation/device-mapper/dm-flakey.txt b/Documentation/device-mapper/dm-flakey.txt new file mode 100644 index 000000000000..c8efdfd19a65 --- /dev/null +++ b/Documentation/device-mapper/dm-flakey.txt @@ -0,0 +1,17 @@ +dm-flakey +========= + +This target is the same as the linear target except that it returns I/O +errors periodically. It's been found useful in simulating failing +devices for testing purposes. + +Starting from the time the table is loaded, the device is available for +<up interval> seconds, then returns errors for <down interval> seconds, +and then this cycle repeats. + +Parameters: <dev path> <offset> <up interval> <down interval> + <dev path>: Full pathname to the underlying block-device, or a + "major:minor" device-number. + <offset>: Starting sector within the device. + <up interval>: Number of seconds device is available. + <down interval>: Number of seconds device returns errors. diff --git a/Documentation/device-mapper/dm-service-time.txt b/Documentation/device-mapper/dm-service-time.txt index 7d00668e97bb..fb1d4a0cf122 100644 --- a/Documentation/device-mapper/dm-service-time.txt +++ b/Documentation/device-mapper/dm-service-time.txt @@ -37,7 +37,7 @@ Algorithm ========= dm-service-time adds the I/O size to 'in-flight-size' when the I/O is -dispatched and substracts when completed. +dispatched and subtracts when completed. Basically, dm-service-time selects a path having minimum service time which is calculated by: diff --git a/Documentation/devicetree/bindings/fb/sm501fb.txt b/Documentation/devicetree/bindings/fb/sm501fb.txt new file mode 100644 index 000000000000..9d9f0098092b --- /dev/null +++ b/Documentation/devicetree/bindings/fb/sm501fb.txt @@ -0,0 +1,34 @@ +* SM SM501 + +The SM SM501 is a LCD controller, with proper hardware, it can also +drive DVI monitors. + +Required properties: +- compatible : should be "smi,sm501". +- reg : contain two entries: + - First entry: System Configuration register + - Second entry: IO space (Display Controller register) +- interrupts : SMI interrupt to the cpu should be described here. +- interrupt-parent : the phandle for the interrupt controller that + services interrupts for this device. + +Optional properties: +- mode : select a video mode: + <xres>x<yres>[-<bpp>][@<refresh>] +- edid : verbatim EDID data block describing attached display. + Data from the detailed timing descriptor will be used to + program the display controller. +- little-endian: available on big endian systems, to + set different foreign endian. +- big-endian: available on little endian systems, to + set different foreign endian. + +Example for MPC5200: + display@1,0 { + compatible = "smi,sm501"; + reg = <1 0x00000000 0x00800000 + 1 0x03e00000 0x00200000>; + interrupts = <1 1 3>; + mode = "640x480-32@60"; + edid = [edid-data]; + }; diff --git a/Documentation/devicetree/bindings/hwmon/ads1015.txt b/Documentation/devicetree/bindings/hwmon/ads1015.txt new file mode 100644 index 000000000000..918a507d1159 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ads1015.txt @@ -0,0 +1,73 @@ +ADS1015 (I2C) + +This device is a 12-bit A-D converter with 4 inputs. + +The inputs can be used single ended or in certain differential combinations. + +For configuration all possible combinations are mapped to 8 channels: + 0: Voltage over AIN0 and AIN1. + 1: Voltage over AIN0 and AIN3. + 2: Voltage over AIN1 and AIN3. + 3: Voltage over AIN2 and AIN3. + 4: Voltage over AIN0 and GND. + 5: Voltage over AIN1 and GND. + 6: Voltage over AIN2 and GND. + 7: Voltage over AIN3 and GND. + +Each channel can be configured individually: + - pga is the programmable gain amplifier (values are full scale) + 0: +/- 6.144 V + 1: +/- 4.096 V + 2: +/- 2.048 V (default) + 3: +/- 1.024 V + 4: +/- 0.512 V + 5: +/- 0.256 V + - data_rate in samples per second + 0: 128 + 1: 250 + 2: 490 + 3: 920 + 4: 1600 (default) + 5: 2400 + 6: 3300 + +1) The /ads1015 node + + Required properties: + + - compatible : must be "ti,ads1015" + - reg : I2C bus address of the device + - #address-cells : must be <1> + - #size-cells : must be <0> + + The node contains child nodes for each channel that the platform uses. + + Example ADS1015 node: + + ads1015@49 { + compatible = "ti,ads1015"; + reg = <0x49>; + #address-cells = <1>; + #size-cells = <0>; + + [ child node definitions... ] + } + +2) channel nodes + + Required properties: + + - reg : the channel number + + Optional properties: + + - ti,gain : the programmable gain amplifier setting + - ti,datarate : the converter data rate + + Example ADS1015 channel node: + + channel@4 { + reg = <4>; + ti,gain = <3>; + ti,datarate = <5>; + }; diff --git a/Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt b/Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt index a48b2cadc7f0..00f1f546b32e 100644 --- a/Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt +++ b/Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt @@ -15,7 +15,7 @@ Optional properties: - gpios : may specify optional GPIOs connected to the Ready-Not-Busy pins (R/B#). For multi-chip devices, "n" GPIO definitions are required according to the number of chips. -- chip-delay : chip dependent delay for transfering data from array to +- chip-delay : chip dependent delay for transferring data from array to read registers (tR). Required if property "gpios" is not used (R/B# pins not connected). diff --git a/Documentation/devicetree/bindings/net/can/sja1000.txt b/Documentation/devicetree/bindings/net/can/sja1000.txt index d6d209ded937..c2dbcec0ee31 100644 --- a/Documentation/devicetree/bindings/net/can/sja1000.txt +++ b/Documentation/devicetree/bindings/net/can/sja1000.txt @@ -39,7 +39,7 @@ Optional properties: - nxp,no-comparator-bypass : Allows to disable the CAN input comperator. -For futher information, please have a look to the SJA1000 data sheet. +For further information, please have a look to the SJA1000 data sheet. Examples: diff --git a/Documentation/devicetree/bindings/open-pic.txt b/Documentation/devicetree/bindings/open-pic.txt new file mode 100644 index 000000000000..909a902dff85 --- /dev/null +++ b/Documentation/devicetree/bindings/open-pic.txt @@ -0,0 +1,98 @@ +* Open PIC Binding + +This binding specifies what properties must be available in the device tree +representation of an Open PIC compliant interrupt controller. This binding is +based on the binding defined for Open PIC in [1] and is a superset of that +binding. + +Required properties: + + NOTE: Many of these descriptions were paraphrased here from [1] to aid + readability. + + - compatible: Specifies the compatibility list for the PIC. The type + shall be <string> and the value shall include "open-pic". + + - reg: Specifies the base physical address(s) and size(s) of this + PIC's addressable register space. The type shall be <prop-encoded-array>. + + - interrupt-controller: The presence of this property identifies the node + as an Open PIC. No property value shall be defined. + + - #interrupt-cells: Specifies the number of cells needed to encode an + interrupt source. The type shall be a <u32> and the value shall be 2. + + - #address-cells: Specifies the number of cells needed to encode an + address. The type shall be <u32> and the value shall be 0. As such, + 'interrupt-map' nodes do not have to specify a parent unit address. + +Optional properties: + + - pic-no-reset: The presence of this property indicates that the PIC + shall not be reset during runtime initialization. No property value shall + be defined. The presence of this property also mandates that any + initialization related to interrupt sources shall be limited to sources + explicitly referenced in the device tree. + +* Interrupt Specifier Definition + + Interrupt specifiers consists of 2 cells encoded as + follows: + + - <1st-cell>: The interrupt-number that identifies the interrupt source. + + - <2nd-cell>: The level-sense information, encoded as follows: + 0 = low-to-high edge triggered + 1 = active low level-sensitive + 2 = active high level-sensitive + 3 = high-to-low edge triggered + +* Examples + +Example 1: + + /* + * An Open PIC interrupt controller + */ + mpic: pic@40000 { + // This is an interrupt controller node. + interrupt-controller; + + // No address cells so that 'interrupt-map' nodes which reference + // this Open PIC node do not need a parent address specifier. + #address-cells = <0>; + + // Two cells to encode interrupt sources. + #interrupt-cells = <2>; + + // Offset address of 0x40000 and size of 0x40000. + reg = <0x40000 0x40000>; + + // Compatible with Open PIC. + compatible = "open-pic"; + + // The PIC shall not be reset. + pic-no-reset; + }; + +Example 2: + + /* + * An interrupt generating device that is wired to an Open PIC. + */ + serial0: serial@4500 { + // Interrupt source '42' that is active high level-sensitive. + // Note that there are only two cells as specified in the interrupt + // parent's '#interrupt-cells' property. + interrupts = <42 2>; + + // The interrupt controller that this device is wired to. + interrupt-parent = <&mpic>; + }; + +* References + +[1] Power.org (TM) Standard for Embedded Power Architecture (TM) Platform + Requirements (ePAPR), Version 1.0, July 2008. + (http://www.power.org/resources/downloads/Power_ePAPR_APPROVED_v1.0.pdf) + diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt index 8aa10f45ebe6..4f6145859aab 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt @@ -199,7 +199,7 @@ EXAMPLE 4 EXAMPLE 5 /* - * Definition of an error interrupt (interupt type 1). + * Definition of an error interrupt (interrupt type 1). * SoC interrupt number is 16 and the specific error * interrupt bit in the error interrupt summary register * is 23. diff --git a/Documentation/devicetree/booting-without-of.txt b/Documentation/devicetree/booting-without-of.txt index 55fd2623445b..50619a0720a8 100644 --- a/Documentation/devicetree/booting-without-of.txt +++ b/Documentation/devicetree/booting-without-of.txt @@ -138,7 +138,7 @@ and properties to be present. This will be described in detail in section III, but, for example, the kernel does not require you to create a node for every PCI device in the system. It is a requirement to have a node for PCI host bridges in order to provide interrupt -routing informations and memory/IO ranges, among others. It is also +routing information and memory/IO ranges, among others. It is also recommended to define nodes for on chip devices and other buses that don't specifically fit in an existing OF specification. This creates a great flexibility in the way the kernel can then probe those and match @@ -385,7 +385,7 @@ struct boot_param_header { among others, by kexec. If you are on an SMP system, this value should match the content of the "reg" property of the CPU node in the device-tree corresponding to the CPU calling the kernel entry - point (see further chapters for more informations on the required + point (see further chapters for more information on the required device-tree contents) - size_dt_strings @@ -553,7 +553,7 @@ looks like in practice. This tree is almost a minimal tree. It pretty much contains the minimal set of required nodes and properties to boot a linux kernel; -that is, some basic model informations at the root, the CPUs, and the +that is, some basic model information at the root, the CPUs, and the physical memory layout. It also includes misc information passed through /chosen, like in this example, the platform type (mandatory) and the kernel command line arguments (optional). diff --git a/Documentation/dvb/README.dvb-usb b/Documentation/dvb/README.dvb-usb index c8238e44ed6b..c4d963a67d6f 100644 --- a/Documentation/dvb/README.dvb-usb +++ b/Documentation/dvb/README.dvb-usb @@ -138,7 +138,7 @@ Hotplug is able to load the driver, when it is needed (because you plugged in the device). If you want to enable debug output, you have to load the driver manually and -from withing the dvb-kernel cvs repository. +from within the dvb-kernel cvs repository. first have a look, which debug level are available: diff --git a/Documentation/dvb/ci.txt b/Documentation/dvb/ci.txt index 4a0c2b56e690..6c3bda50f7dc 100644 --- a/Documentation/dvb/ci.txt +++ b/Documentation/dvb/ci.txt @@ -47,7 +47,7 @@ so on. * CI modules that are supported ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -The CI module support is largely dependant upon the firmware on the cards +The CI module support is largely dependent upon the firmware on the cards Some cards do support almost all of the available CI modules. There is nothing much that can be done in order to make additional CI modules working with these cards. diff --git a/Documentation/dvb/faq.txt b/Documentation/dvb/faq.txt index 121832e5d899..97b1373f2428 100644 --- a/Documentation/dvb/faq.txt +++ b/Documentation/dvb/faq.txt @@ -106,7 +106,7 @@ Some very frequently asked questions about linuxtv-dvb 5. The dvb_net device doesn't give me any packets at all Run tcpdump on the dvb0_0 interface. This sets the interface - into promiscous mode so it accepts any packets from the PID + into promiscuous mode so it accepts any packets from the PID you have configured with the dvbnet utility. Check if there are any packets with the IP addr and MAC addr you have configured with ifconfig. diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware index 59690de8ebfe..3348d313fbe0 100644 --- a/Documentation/dvb/get_dvb_firmware +++ b/Documentation/dvb/get_dvb_firmware @@ -556,6 +556,9 @@ sub ngene { my $hash1 = "d798d5a757121174f0dbc5f2833c0c85"; my $file2 = "ngene_17.fw"; my $hash2 = "26b687136e127b8ac24b81e0eeafc20b"; + my $url2 = "http://l4m-daten.de/downloads/firmware/dvb-s2/linux/all/"; + my $file3 = "ngene_18.fw"; + my $hash3 = "ebce3ea769a53e3e0b0197c3b3f127e3"; checkstandard(); @@ -565,7 +568,10 @@ sub ngene { wgetfile($file2, $url . $file2); verify($file2, $hash2); - "$file1, $file2"; + wgetfile($file3, $url2 . $file3); + verify($file3, $hash3); + + "$file1, $file2, $file3"; } sub az6027{ diff --git a/Documentation/dvb/lmedm04.txt b/Documentation/dvb/lmedm04.txt index 641886504201..10b5f0411386 100644 --- a/Documentation/dvb/lmedm04.txt +++ b/Documentation/dvb/lmedm04.txt @@ -4,7 +4,7 @@ following file(s) to this directory. for DM04+/QQBOX LME2510C (Sharp 7395 Tuner) ------------------------------------------- -The Sharp 7395 driver can be found in windows/system32/driver +The Sharp 7395 driver can be found in windows/system32/drivers US2A0D.sys (dated 17 Mar 2009) @@ -44,7 +44,7 @@ and run Other LG firmware can be extracted manually from US280D.sys -only found in windows/system32/driver. +only found in windows/system32/drivers dd if=US280D.sys ibs=1 skip=42360 count=3924 of=dvb-usb-lme2510-lg.fw @@ -55,4 +55,16 @@ dd if=US280D.sys ibs=1 skip=35200 count=3850 of=dvb-usb-lme2510c-lg.fw --------------------------------------------------------------------- +The Sharp 0194 tuner driver can be found in windows/system32/drivers + +US290D.sys (dated 09 Apr 2009) + +For LME2510 +dd if=US290D.sys ibs=1 skip=36856 count=3976 of=dvb-usb-lme2510-s0194.fw + + +For LME2510C +dd if=US290D.sys ibs=1 skip=33152 count=3697 of=dvb-usb-lme2510c-s0194.fw + + Copy the firmware file(s) to /lib/firmware diff --git a/Documentation/dvb/udev.txt b/Documentation/dvb/udev.txt index 68ee224b6aae..412305b7c557 100644 --- a/Documentation/dvb/udev.txt +++ b/Documentation/dvb/udev.txt @@ -1,7 +1,7 @@ The DVB subsystem currently registers to the sysfs subsystem using the "class_simple" interface. -This means that only the basic informations like module loading parameters +This means that only the basic information like module loading parameters are presented through sysfs. Other things that might be interesting are currently *not* available. diff --git a/Documentation/dynamic-debug-howto.txt b/Documentation/dynamic-debug-howto.txt index e6c4b757025b..f959909d7154 100644 --- a/Documentation/dynamic-debug-howto.txt +++ b/Documentation/dynamic-debug-howto.txt @@ -6,7 +6,7 @@ This document describes how to use the dynamic debug (ddebug) feature. Dynamic debug is designed to allow you to dynamically enable/disable kernel code to obtain additional kernel information. Currently, if -CONFIG_DYNAMIC_DEBUG is set, then all pr_debug()/dev_debug() calls can be +CONFIG_DYNAMIC_DEBUG is set, then all pr_debug()/dev_dbg() calls can be dynamically enabled per-callsite. Dynamic debug has even more useful features: @@ -26,7 +26,7 @@ Dynamic debug has even more useful features: Controlling dynamic debug Behaviour =================================== -The behaviour of pr_debug()/dev_debug()s are controlled via writing to a +The behaviour of pr_debug()/dev_dbg()s are controlled via writing to a control file in the 'debugfs' filesystem. Thus, you must first mount the debugfs filesystem, in order to make use of this feature. Subsequently, we refer to the control file as: <debugfs>/dynamic_debug/control. For example, if you want to diff --git a/Documentation/edac.txt b/Documentation/edac.txt index 9ee774de57cd..249822cde82b 100644 --- a/Documentation/edac.txt +++ b/Documentation/edac.txt @@ -311,7 +311,7 @@ Total Correctable Errors count attribute file: 'ce_noinfo_count' This attribute file displays the number of CEs that - have occurred wherewith no informations as to which DIMM slot + have occurred wherewith no information as to which DIMM slot is having errors. Memory is handicapped, but operational, yet no information is available to indicate which slot the failing memory is in. This count field should be also @@ -741,7 +741,7 @@ were done at i7core_edac driver. This chapter will cover those differences As EDAC API maps the minimum unity is csrows, the driver sequencially maps channel/dimm into different csrows. - For example, suposing the following layout: + For example, supposing the following layout: Ch0 phy rd0, wr0 (0x063f4031): 2 ranks, UDIMMs dimm 0 1024 Mb offset: 0, bank: 8, rank: 1, row: 0x4000, col: 0x400 dimm 1 1024 Mb offset: 4, bank: 8, rank: 1, row: 0x4000, col: 0x400 diff --git a/Documentation/eisa.txt b/Documentation/eisa.txt index f297fc1202ae..38cf0c7b559f 100644 --- a/Documentation/eisa.txt +++ b/Documentation/eisa.txt @@ -84,7 +84,7 @@ struct eisa_driver { id_table : an array of NULL terminated EISA id strings, followed by an empty string. Each string can - optionally be paired with a driver-dependant value + optionally be paired with a driver-dependent value (driver_data). driver : a generic driver, such as described in diff --git a/Documentation/fb/sm501.txt b/Documentation/fb/sm501.txt new file mode 100644 index 000000000000..8d17aebd2648 --- /dev/null +++ b/Documentation/fb/sm501.txt @@ -0,0 +1,10 @@ +Configuration: + +You can pass the following kernel command line options to sm501 videoframebuffer: + + sm501fb.bpp= SM501 Display driver: + Specifiy bits-per-pixel if not specified by 'mode' + + sm501fb.mode= SM501 Display driver: + Specify resolution as + "<xres>x<yres>[-<bpp>][@<refresh>]" diff --git a/Documentation/fb/viafb.txt b/Documentation/fb/viafb.txt index 1a2e8aa3fbb1..444e34b52ae1 100644 --- a/Documentation/fb/viafb.txt +++ b/Documentation/fb/viafb.txt @@ -204,7 +204,7 @@ Notes: supported_output_devices - This read-only file contains a full ',' seperated list containing all + This read-only file contains a full ',' separated list containing all output devices that could be available on your platform. It is likely that not all of those have a connector on your hardware but it should provide a good starting point to figure out which of those names match @@ -225,7 +225,7 @@ Notes: This can happen for example if only one (the other) iga is used. Writing to these files allows adjusting the output devices during runtime. One can add new devices, remove existing ones or switch - between igas. Essentially you can write a ',' seperated list of device + between igas. Essentially you can write a ',' separated list of device names (or a single one) in the same format as the output to those files. You can add a '+' or '-' as a prefix allowing simple addition and removal of devices. So a prefix '+' adds the devices from your list diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index f487c6918d78..492e81df2968 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -108,42 +108,6 @@ Who: Pavel Machek <pavel@ucw.cz> --------------------------- -What: Video4Linux obsolete drivers using V4L1 API -When: kernel 2.6.39 -Files: drivers/staging/se401/* drivers/staging/usbvideo/* -Check: drivers/staging/se401/se401.c drivers/staging/usbvideo/usbvideo.c -Why: There are some drivers still using V4L1 API, despite all efforts we've done - to migrate. Those drivers are for obsolete hardware that the old maintainer - didn't care (or not have the hardware anymore), and that no other developer - could find any hardware to buy. They probably have no practical usage today, - and people with such old hardware could probably keep using an older version - of the kernel. Those drivers will be moved to staging on 2.6.38 and, if nobody - cares enough to port and test them with V4L2 API, they'll be removed on 2.6.39. -Who: Mauro Carvalho Chehab <mchehab@infradead.org> - ---------------------------- - -What: Video4Linux: Remove obsolete ioctl's -When: kernel 2.6.39 -Files: include/media/videodev2.h -Why: Some ioctl's were defined wrong on 2.6.2 and 2.6.6, using the wrong - type of R/W arguments. They were fixed, but the old ioctl names are - still there, maintained to avoid breaking binary compatibility: - #define VIDIOC_OVERLAY_OLD _IOWR('V', 14, int) - #define VIDIOC_S_PARM_OLD _IOW('V', 22, struct v4l2_streamparm) - #define VIDIOC_S_CTRL_OLD _IOW('V', 28, struct v4l2_control) - #define VIDIOC_G_AUDIO_OLD _IOWR('V', 33, struct v4l2_audio) - #define VIDIOC_G_AUDOUT_OLD _IOWR('V', 49, struct v4l2_audioout) - #define VIDIOC_CROPCAP_OLD _IOR('V', 58, struct v4l2_cropcap) - There's no sense on preserving those forever, as it is very doubtful - that someone would try to use a such old binary with a modern kernel. - Removing them will allow us to remove some magic done at the V4L ioctl - handler. - -Who: Mauro Carvalho Chehab <mchehab@infradead.org> - ---------------------------- - What: sys_sysctl When: September 2010 Option: CONFIG_SYSCTL_SYSCALL @@ -270,14 +234,6 @@ Who: Zhang Rui <rui.zhang@intel.com> --------------------------- -What: /proc/acpi/button -When: August 2007 -Why: /proc/acpi/button has been replaced by events to the input layer - since 2.6.20. -Who: Len Brown <len.brown@intel.com> - ---------------------------- - What: /proc/acpi/event When: February 2008 Why: /proc/acpi/event has been replaced by events via the input layer @@ -431,26 +387,6 @@ Who: Tejun Heo <tj@kernel.org> ---------------------------- -What: Support for lcd_switch and display_get in asus-laptop driver -When: March 2010 -Why: These two features use non-standard interfaces. There are the - only features that really need multiple path to guess what's - the right method name on a specific laptop. - - Removing them will allow to remove a lot of code an significantly - clean the drivers. - - This will affect the backlight code which won't be able to know - if the backlight is on or off. The platform display file will also be - write only (like the one in eeepc-laptop). - - This should'nt affect a lot of user because they usually know - when their display is on or off. - -Who: Corentin Chary <corentin.chary@gmail.com> - ----------------------------- - What: sysfs-class-rfkill state file When: Feb 2014 Files: net/rfkill/core.c @@ -585,16 +521,6 @@ Who: NeilBrown <neilb@suse.de> ---------------------------- -What: i2c_adapter.id -When: June 2011 -Why: This field is deprecated. I2C device drivers shouldn't change their - behavior based on the underlying I2C adapter. Instead, the I2C - adapter driver should instantiate the I2C devices and provide the - needed platform-specific information. -Who: Jean Delvare <khali@linux-fr.org> - ----------------------------- - What: cancel_rearming_delayed_work[queue]() When: 2.6.39 @@ -645,3 +571,12 @@ Who: Florian Westphal <fw@strlen.de> Files: include/linux/netfilter_ipv4/ipt_addrtype.h ---------------------------- + +What: i2c_driver.attach_adapter + i2c_driver.detach_adapter +When: September 2011 +Why: These legacy callbacks should no longer be used as i2c-core offers + a variety of preferable alternative ways to instantiate I2C devices. +Who: Jean Delvare <khali@linux-fr.org> + +---------------------------- diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index 2e994efe12cb..61b31acb9176 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -128,7 +128,7 @@ alloc_inode: destroy_inode: dirty_inode: (must not sleep) write_inode: -drop_inode: !!!inode_lock!!! +drop_inode: !!!inode->i_lock!!! evict_inode: put_super: write write_super: read diff --git a/Documentation/filesystems/adfs.txt b/Documentation/filesystems/adfs.txt index 9e8811f92b84..5949766353f7 100644 --- a/Documentation/filesystems/adfs.txt +++ b/Documentation/filesystems/adfs.txt @@ -9,6 +9,9 @@ Mount options for ADFS will be nnn. Default 0700. othmask=nnn The permission mask for ADFS 'other' permissions will be nnn. Default 0077. + ftsuffix=n When ftsuffix=0, no file type suffix will be applied. + When ftsuffix=1, a hexadecimal suffix corresponding to + the RISC OS file type will be added. Default 0. Mapping of ADFS permissions to Linux permissions ------------------------------------------------ @@ -55,3 +58,18 @@ Mapping of ADFS permissions to Linux permissions You can therefore tailor the permission translation to whatever you desire the permissions should be under Linux. + +RISC OS file type suffix +------------------------ + + RISC OS file types are stored in bits 19..8 of the file load address. + + To enable non-RISC OS systems to be used to store files without losing + file type information, a file naming convention was devised (initially + for use with NFS) such that a hexadecimal suffix of the form ,xyz + denoted the file type: e.g. BasicFile,ffb is a BASIC (0xffb) file. This + naming convention is now also used by RISC OS emulators such as RPCEmu. + + Mounting an ADFS disc with option ftsuffix=1 will cause appropriate file + type suffixes to be appended to file names read from a directory. If the + ftsuffix option is zero or omitted, no file type suffixes will be added. diff --git a/Documentation/filesystems/autofs4-mount-control.txt b/Documentation/filesystems/autofs4-mount-control.txt index 51986bf08a4d..4c95935cbcf4 100644 --- a/Documentation/filesystems/autofs4-mount-control.txt +++ b/Documentation/filesystems/autofs4-mount-control.txt @@ -309,7 +309,7 @@ ioctlfd field set to the descriptor obtained from the open call. AUTOFS_DEV_IOCTL_TIMEOUT_CMD ---------------------------- -Set the expire timeout for mounts withing an autofs mount point. +Set the expire timeout for mounts within an autofs mount point. The call requires an initialized struct autofs_dev_ioctl with the ioctlfd field set to the descriptor obtained from the open call. diff --git a/Documentation/filesystems/caching/netfs-api.txt b/Documentation/filesystems/caching/netfs-api.txt index 1902c57b72ef..a167ab876c35 100644 --- a/Documentation/filesystems/caching/netfs-api.txt +++ b/Documentation/filesystems/caching/netfs-api.txt @@ -95,7 +95,7 @@ restraints as possible on how an index is structured and where it is placed in the tree. The netfs can even mix indices and data files at the same level, but it's not recommended. -Each index entry consists of a key of indeterminate length plus some auxilliary +Each index entry consists of a key of indeterminate length plus some auxiliary data, also of indeterminate length. There are some limits on indices: @@ -203,23 +203,23 @@ This has the following fields: If the function is absent, a file size of 0 is assumed. - (6) A function to retrieve auxilliary data from the netfs [optional]. + (6) A function to retrieve auxiliary data from the netfs [optional]. This function will be called with the netfs data that was passed to the - cookie acquisition function and the maximum length of auxilliary data that - it may provide. It should write the auxilliary data into the given buffer + cookie acquisition function and the maximum length of auxiliary data that + it may provide. It should write the auxiliary data into the given buffer and return the quantity it wrote. - If this function is absent, the auxilliary data length will be set to 0. + If this function is absent, the auxiliary data length will be set to 0. - The length of the auxilliary data buffer may be dependent on the key + The length of the auxiliary data buffer may be dependent on the key length. A netfs mustn't rely on being able to provide more than 400 bytes for both. - (7) A function to check the auxilliary data [optional]. + (7) A function to check the auxiliary data [optional]. This function will be called to check that a match found in the cache for - this object is valid. For instance with AFS it could check the auxilliary + this object is valid. For instance with AFS it could check the auxiliary data against the data version number returned by the server to determine whether the index entry in a cache is still valid. @@ -232,7 +232,7 @@ This has the following fields: (*) FSCACHE_CHECKAUX_NEEDS_UPDATE - the entry requires update (*) FSCACHE_CHECKAUX_OBSOLETE - the entry should be deleted - This function can also be used to extract data from the auxilliary data in + This function can also be used to extract data from the auxiliary data in the cache and copy it into the netfs's structures. (8) A pair of functions to manage contexts for the completion callback diff --git a/Documentation/filesystems/configfs/configfs.txt b/Documentation/filesystems/configfs/configfs.txt index fabcb0e00f25..dd57bb6bb390 100644 --- a/Documentation/filesystems/configfs/configfs.txt +++ b/Documentation/filesystems/configfs/configfs.txt @@ -409,7 +409,7 @@ As a consequence of this, default_groups cannot be removed directly via rmdir(2). They also are not considered when rmdir(2) on the parent group is checking for children. -[Dependant Subsystems] +[Dependent Subsystems] Sometimes other drivers depend on particular configfs items. For example, ocfs2 mounts depend on a heartbeat region item. If that diff --git a/Documentation/filesystems/exofs.txt b/Documentation/filesystems/exofs.txt index abd2a9b5b787..23583a136975 100644 --- a/Documentation/filesystems/exofs.txt +++ b/Documentation/filesystems/exofs.txt @@ -104,7 +104,15 @@ Where: exofs specific options: Options are separated by commas (,) pid=<integer> - The partition number to mount/create as container of the filesystem. - This option is mandatory. + This option is mandatory. integer can be + Hex by pre-pending an 0x to the number. + osdname=<id> - Mount by a device's osdname. + osdname is usually a 36 character uuid of the + form "d2683732-c906-4ee1-9dbd-c10c27bb40df". + It is one of the device's uuid specified in the + mkfs.exofs format command. + If this option is specified then the /dev/osdX + above can be empty and is ignored. to=<integer> - Timeout in ticks for a single command. default is (60 * HZ) [for debugging only] diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt index 6ab9442d7eeb..c79ec58fd7f6 100644 --- a/Documentation/filesystems/ext4.txt +++ b/Documentation/filesystems/ext4.txt @@ -97,7 +97,7 @@ Note: More extensive information for getting started with ext4 can be * Inode allocation using large virtual block groups via flex_bg * delayed allocation * large block (up to pagesize) support -* efficent new ordered mode in JBD2 and ext4(avoid using buffer head to force +* efficient new ordered mode in JBD2 and ext4(avoid using buffer head to force the ordering) [1] Filesystems with a block size of 1k may see a limit imposed by the @@ -106,7 +106,7 @@ directory hash tree having a maximum depth of two. 2.2 Candidate features for future inclusion * Online defrag (patches available but not well tested) -* reduced mke2fs time via lazy itable initialization in conjuction with +* reduced mke2fs time via lazy itable initialization in conjunction with the uninit_bg feature (capability to do this is available in e2fsprogs but a kernel thread to do lazy zeroing of unused inode table blocks after filesystem is first mounted is required for safety) @@ -367,12 +367,47 @@ init_itable=n The lazy itable init code will wait n times the minimizes the impact on the systme performance while file system's inode table is being initialized. -discard Controls whether ext4 should issue discard/TRIM +discard Controls whether ext4 should issue discard/TRIM nodiscard(*) commands to the underlying block device when blocks are freed. This is useful for SSD devices and sparse/thinly-provisioned LUNs, but it is off by default until sufficient testing has been done. +nouid32 Disables 32-bit UIDs and GIDs. This is for + interoperability with older kernels which only + store and expect 16-bit values. + +resize Allows to resize filesystem to the end of the last + existing block group, further resize has to be done + with resize2fs either online, or offline. It can be + used only with conjunction with remount. + +block_validity This options allows to enables/disables the in-kernel +noblock_validity facility for tracking filesystem metadata blocks + within internal data structures. This allows multi- + block allocator and other routines to quickly locate + extents which might overlap with filesystem metadata + blocks. This option is intended for debugging + purposes and since it negatively affects the + performance, it is off by default. + +dioread_lock Controls whether or not ext4 should use the DIO read +dioread_nolock locking. If the dioread_nolock option is specified + ext4 will allocate uninitialized extent before buffer + write and convert the extent to initialized after IO + completes. This approach allows ext4 code to avoid + using inode mutex, which improves scalability on high + speed storages. However this does not work with nobh + option and the mount will fail. Nor does it work with + data journaling and dioread_nolock option will be + ignored with kernel warning. Note that dioread_nolock + code path is only used for extent-based files. + Because of the restrictions this options comprises + it is off by default (e.g. dioread_lock). + +i_version Enable 64-bit inode version support. This option is + off by default. + Data Mode ========= There are 3 different data modes: @@ -400,6 +435,176 @@ needs to be read from and written to disk at the same time where it outperforms all others modes. Currently ext4 does not have delayed allocation support if this data journalling mode is selected. +/proc entries +============= + +Information about mounted ext4 file systems can be found in +/proc/fs/ext4. Each mounted filesystem will have a directory in +/proc/fs/ext4 based on its device name (i.e., /proc/fs/ext4/hdc or +/proc/fs/ext4/dm-0). The files in each per-device directory are shown +in table below. + +Files in /proc/fs/ext4/<devname> +.............................................................................. + File Content + mb_groups details of multiblock allocator buddy cache of free blocks +.............................................................................. + +/sys entries +============ + +Information about mounted ext4 file systems can be found in +/sys/fs/ext4. Each mounted filesystem will have a directory in +/sys/fs/ext4 based on its device name (i.e., /sys/fs/ext4/hdc or +/sys/fs/ext4/dm-0). The files in each per-device directory are shown +in table below. + +Files in /sys/fs/ext4/<devname> +(see also Documentation/ABI/testing/sysfs-fs-ext4) +.............................................................................. + File Content + + delayed_allocation_blocks This file is read-only and shows the number of + blocks that are dirty in the page cache, but + which do not have their location in the + filesystem allocated yet. + + inode_goal Tuning parameter which (if non-zero) controls + the goal inode used by the inode allocator in + preference to all other allocation heuristics. + This is intended for debugging use only, and + should be 0 on production systems. + + inode_readahead_blks Tuning parameter which controls the maximum + number of inode table blocks that ext4's inode + table readahead algorithm will pre-read into + the buffer cache + + lifetime_write_kbytes This file is read-only and shows the number of + kilobytes of data that have been written to this + filesystem since it was created. + + max_writeback_mb_bump The maximum number of megabytes the writeback + code will try to write out before move on to + another inode. + + mb_group_prealloc The multiblock allocator will round up allocation + requests to a multiple of this tuning parameter if + the stripe size is not set in the ext4 superblock + + mb_max_to_scan The maximum number of extents the multiblock + allocator will search to find the best extent + + mb_min_to_scan The minimum number of extents the multiblock + allocator will search to find the best extent + + mb_order2_req Tuning parameter which controls the minimum size + for requests (as a power of 2) where the buddy + cache is used + + mb_stats Controls whether the multiblock allocator should + collect statistics, which are shown during the + unmount. 1 means to collect statistics, 0 means + not to collect statistics + + mb_stream_req Files which have fewer blocks than this tunable + parameter will have their blocks allocated out + of a block group specific preallocation pool, so + that small files are packed closely together. + Each large file will have its blocks allocated + out of its own unique preallocation pool. + + session_write_kbytes This file is read-only and shows the number of + kilobytes of data that have been written to this + filesystem since it was mounted. +.............................................................................. + +Ioctls +====== + +There is some Ext4 specific functionality which can be accessed by applications +through the system call interfaces. The list of all Ext4 specific ioctls are +shown in the table below. + +Table of Ext4 specific ioctls +.............................................................................. + Ioctl Description + EXT4_IOC_GETFLAGS Get additional attributes associated with inode. + The ioctl argument is an integer bitfield, with + bit values described in ext4.h. This ioctl is an + alias for FS_IOC_GETFLAGS. + + EXT4_IOC_SETFLAGS Set additional attributes associated with inode. + The ioctl argument is an integer bitfield, with + bit values described in ext4.h. This ioctl is an + alias for FS_IOC_SETFLAGS. + + EXT4_IOC_GETVERSION + EXT4_IOC_GETVERSION_OLD + Get the inode i_generation number stored for + each inode. The i_generation number is normally + changed only when new inode is created and it is + particularly useful for network filesystems. The + '_OLD' version of this ioctl is an alias for + FS_IOC_GETVERSION. + + EXT4_IOC_SETVERSION + EXT4_IOC_SETVERSION_OLD + Set the inode i_generation number stored for + each inode. The '_OLD' version of this ioctl + is an alias for FS_IOC_SETVERSION. + + EXT4_IOC_GROUP_EXTEND This ioctl has the same purpose as the resize + mount option. It allows to resize filesystem + to the end of the last existing block group, + further resize has to be done with resize2fs, + either online, or offline. The argument points + to the unsigned logn number representing the + filesystem new block count. + + EXT4_IOC_MOVE_EXT Move the block extents from orig_fd (the one + this ioctl is pointing to) to the donor_fd (the + one specified in move_extent structure passed + as an argument to this ioctl). Then, exchange + inode metadata between orig_fd and donor_fd. + This is especially useful for online + defragmentation, because the allocator has the + opportunity to allocate moved blocks better, + ideally into one contiguous extent. + + EXT4_IOC_GROUP_ADD Add a new group descriptor to an existing or + new group descriptor block. The new group + descriptor is described by ext4_new_group_input + structure, which is passed as an argument to + this ioctl. This is especially useful in + conjunction with EXT4_IOC_GROUP_EXTEND, + which allows online resize of the filesystem + to the end of the last existing block group. + Those two ioctls combined is used in userspace + online resize tool (e.g. resize2fs). + + EXT4_IOC_MIGRATE This ioctl operates on the filesystem itself. + It converts (migrates) ext3 indirect block mapped + inode to ext4 extent mapped inode by walking + through indirect block mapping of the original + inode and converting contiguous block ranges + into ext4 extents of the temporary inode. Then, + inodes are swapped. This ioctl might help, when + migrating from ext3 to ext4 filesystem, however + suggestion is to create fresh ext4 filesystem + and copy data from the backup. Note, that + filesystem has to support extents for this ioctl + to work. + + EXT4_IOC_ALLOC_DA_BLKS Force all of the delay allocated blocks to be + allocated to preserve application-expected ext3 + behaviour. Note that this will also start + triggering a write of the data blocks, but this + behaviour may change in the future as it is + not necessary and has been done this way only + for sake of simplicity. +.............................................................................. + References ========== diff --git a/Documentation/filesystems/gfs2-uevents.txt b/Documentation/filesystems/gfs2-uevents.txt index fd966dc9979a..d81889669293 100644 --- a/Documentation/filesystems/gfs2-uevents.txt +++ b/Documentation/filesystems/gfs2-uevents.txt @@ -62,7 +62,7 @@ be fixed. The REMOVE uevent is generated at the end of an unsuccessful mount or at the end of a umount of the filesystem. All REMOVE uevents will -have been preceeded by at least an ADD uevent for the same fileystem, +have been preceded by at least an ADD uevent for the same fileystem, and unlike the other uevents is generated automatically by the kernel's kobject subsystem. diff --git a/Documentation/filesystems/gfs2.txt b/Documentation/filesystems/gfs2.txt index 0b59c0200912..4cda926628aa 100644 --- a/Documentation/filesystems/gfs2.txt +++ b/Documentation/filesystems/gfs2.txt @@ -11,7 +11,7 @@ their I/O so file system consistency is maintained. One of the nifty features of GFS is perfect consistency -- changes made to the file system on one machine show up immediately on all other machines in the cluster. -GFS uses interchangable inter-node locking mechanisms, the currently +GFS uses interchangeable inter-node locking mechanisms, the currently supported mechanisms are: lock_nolock -- allows gfs to be used as a local file system diff --git a/Documentation/filesystems/ntfs.txt b/Documentation/filesystems/ntfs.txt index 933bc66ccff1..791af8dac065 100644 --- a/Documentation/filesystems/ntfs.txt +++ b/Documentation/filesystems/ntfs.txt @@ -350,7 +350,7 @@ Note the "Should sync?" parameter "nosync" means that the two mirrors are already in sync which will be the case on a clean shutdown of Windows. If the mirrors are not clean, you can specify the "sync" option instead of "nosync" and the Device-Mapper driver will then copy the entirety of the "Source Device" -to the "Target Device" or if you specified multipled target devices to all of +to the "Target Device" or if you specified multiple target devices to all of them. Once you have your table, save it in a file somewhere (e.g. /etc/ntfsvolume1), diff --git a/Documentation/filesystems/ocfs2.txt b/Documentation/filesystems/ocfs2.txt index 5393e6611691..9ed920a8cd79 100644 --- a/Documentation/filesystems/ocfs2.txt +++ b/Documentation/filesystems/ocfs2.txt @@ -80,7 +80,7 @@ user_xattr (*) Enables Extended User Attributes. nouser_xattr Disables Extended User Attributes. acl Enables POSIX Access Control Lists support. noacl (*) Disables POSIX Access Control Lists support. -resv_level=2 (*) Set how agressive allocation reservations will be. +resv_level=2 (*) Set how aggressive allocation reservations will be. Valid values are between 0 (reservations off) to 8 (maximum space for reservations). dir_resv_level= (*) By default, directory reservations will scale with file diff --git a/Documentation/filesystems/path-lookup.txt b/Documentation/filesystems/path-lookup.txt index eb59c8b44be9..3571667c7105 100644 --- a/Documentation/filesystems/path-lookup.txt +++ b/Documentation/filesystems/path-lookup.txt @@ -42,7 +42,7 @@ Path walking overview A name string specifies a start (root directory, cwd, fd-relative) and a sequence of elements (directory entry names), which together refer to a path in the namespace. A path is represented as a (dentry, vfsmount) tuple. The name -elements are sub-strings, seperated by '/'. +elements are sub-strings, separated by '/'. Name lookups will want to find a particular path that a name string refers to (usually the final element, or parent of final element). This is done by taking @@ -354,7 +354,7 @@ vfstest 24185492 4945 708725(2.9%) 1076136(4.4%) 0 2651 What this shows is that failed rcu-walk lookups, ie. ones that are restarted entirely with ref-walk, are quite rare. Even the "vfstest" case which -specifically has concurrent renames/mkdir/rmdir/ creat/unlink/etc to excercise +specifically has concurrent renames/mkdir/rmdir/ creat/unlink/etc to exercise such races is not showing a huge amount of restarts. Dropping from rcu-walk to ref-walk mean that we have encountered a dentry where diff --git a/Documentation/filesystems/pohmelfs/network_protocol.txt b/Documentation/filesystems/pohmelfs/network_protocol.txt index 40ea6c295afb..65e03dd44823 100644 --- a/Documentation/filesystems/pohmelfs/network_protocol.txt +++ b/Documentation/filesystems/pohmelfs/network_protocol.txt @@ -20,7 +20,7 @@ Commands can be embedded into transaction command (which in turn has own command so one can extend protocol as needed without breaking backward compatibility as long as old commands are supported. All string lengths include tail 0 byte. -All commans are transfered over the network in big-endian. CPU endianess is used at the end peers. +All commands are transferred over the network in big-endian. CPU endianess is used at the end peers. @cmd - command number, which specifies command to be processed. Following commands are used currently: diff --git a/Documentation/filesystems/porting b/Documentation/filesystems/porting index 0c986c9e8519..6e29954851a2 100644 --- a/Documentation/filesystems/porting +++ b/Documentation/filesystems/porting @@ -298,11 +298,14 @@ be used instead. It gets called whenever the inode is evicted, whether it has remaining links or not. Caller does *not* evict the pagecache or inode-associated metadata buffers; getting rid of those is responsibility of method, as it had been for ->delete_inode(). - ->drop_inode() returns int now; it's called on final iput() with inode_lock -held and it returns true if filesystems wants the inode to be dropped. As before, -generic_drop_inode() is still the default and it's been updated appropriately. -generic_delete_inode() is also alive and it consists simply of return 1. Note that -all actual eviction work is done by caller after ->drop_inode() returns. + + ->drop_inode() returns int now; it's called on final iput() with +inode->i_lock held and it returns true if filesystems wants the inode to be +dropped. As before, generic_drop_inode() is still the default and it's been +updated appropriately. generic_delete_inode() is also alive and it consists +simply of return 1. Note that all actual eviction work is done by caller after +->drop_inode() returns. + clear_inode() is gone; use end_writeback() instead. As before, it must be called exactly once on each call of ->evict_inode() (as it used to be for each call of ->delete_inode()). Unlike before, if you are using inode-associated @@ -397,6 +400,9 @@ a file off. -- [mandatory] + +-- +[mandatory] ->get_sb() is gone. Switch to use of ->mount(). Typically it's just a matter of switching from calling get_sb_... to mount_... and changing the function type. If you were doing it manually, just switch from setting ->mnt_root diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index 23cae6548d3a..b0b814d75ca1 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -543,7 +543,7 @@ just those considered 'most important'. The new vectors are: their statistics are used by kernel developers and interested users to determine the occurrence of interrupts of the given type. -The above IRQ vectors are displayed only when relevent. For example, +The above IRQ vectors are displayed only when relevant. For example, the threshold vector does not exist on x86_64 platforms. Others are suppressed when the system is a uniprocessor. As of this writing, only i386 and x86_64 platforms support the new IRQ vector displays. @@ -1202,7 +1202,7 @@ The columns are: W = can do write operations U = can do unblank flags E = it is enabled - C = it is prefered console + C = it is preferred console B = it is primary boot console p = it is used for printk buffer b = it is not a TTY but a Braille device @@ -1331,7 +1331,7 @@ NOTICE: /proc/<pid>/oom_adj is deprecated and will be removed, please see Documentation/feature-removal-schedule.txt. Caveat: when a parent task is selected, the oom killer will sacrifice any first -generation children with seperate address spaces instead, if possible. This +generation children with separate address spaces instead, if possible. This avoids servers and important system daemons from being killed and loses the minimal amount of work. diff --git a/Documentation/filesystems/squashfs.txt b/Documentation/filesystems/squashfs.txt index 66699afd66ca..d4d41465a0b1 100644 --- a/Documentation/filesystems/squashfs.txt +++ b/Documentation/filesystems/squashfs.txt @@ -59,12 +59,15 @@ obtained from this site also. 3. SQUASHFS FILESYSTEM DESIGN ----------------------------- -A squashfs filesystem consists of a maximum of eight parts, packed together on a byte -alignment: +A squashfs filesystem consists of a maximum of nine parts, packed together on a +byte alignment: --------------- | superblock | |---------------| + | compression | + | options | + |---------------| | datablocks | | & fragments | |---------------| @@ -91,7 +94,14 @@ the source directory, and checked for duplicates. Once all file data has been written the completed inode, directory, fragment, export and uid/gid lookup tables are written. -3.1 Inodes +3.1 Compression options +----------------------- + +Compressors can optionally support compression specific options (e.g. +dictionary size). If non-default compression options have been used, then +these are stored here. + +3.2 Inodes ---------- Metadata (inodes and directories) are compressed in 8Kbyte blocks. Each @@ -114,7 +124,7 @@ directory inode are defined: inodes optimised for frequently occurring regular files and directories, and extended types where extra information has to be stored. -3.2 Directories +3.3 Directories --------------- Like inodes, directories are packed into compressed metadata blocks, stored @@ -144,7 +154,7 @@ decompressed to do a lookup irrespective of the length of the directory. This scheme has the advantage that it doesn't require extra memory overhead and doesn't require much extra storage on disk. -3.3 File data +3.4 File data ------------- Regular files consist of a sequence of contiguous compressed blocks, and/or a @@ -163,7 +173,7 @@ Larger files use multiple slots, with 1.75 TiB files using all 8 slots. The index cache is designed to be memory efficient, and by default uses 16 KiB. -3.4 Fragment lookup table +3.5 Fragment lookup table ------------------------- Regular files can contain a fragment index which is mapped to a fragment @@ -173,7 +183,7 @@ A second index table is used to locate these. This second index table for speed of access (and because it is small) is read at mount time and cached in memory. -3.5 Uid/gid lookup table +3.6 Uid/gid lookup table ------------------------ For space efficiency regular files store uid and gid indexes, which are @@ -182,7 +192,7 @@ stored compressed into metadata blocks. A second index table is used to locate these. This second index table for speed of access (and because it is small) is read at mount time and cached in memory. -3.6 Export table +3.7 Export table ---------------- To enable Squashfs filesystems to be exportable (via NFS etc.) filesystems @@ -196,7 +206,7 @@ This table is stored compressed into metadata blocks. A second index table is used to locate these. This second index table for speed of access (and because it is small) is read at mount time and cached in memory. -3.7 Xattr table +3.8 Xattr table --------------- The xattr table contains extended attributes for each inode. The xattrs @@ -209,7 +219,7 @@ or if it is stored out of line (in which case the value field stores a reference to where the actual value is stored). This allows large values to be stored out of line improving scanning and lookup performance and it also allows values to be de-duplicated, the value being stored once, and -all other occurences holding an out of line reference to that value. +all other occurrences holding an out of line reference to that value. The xattr lists are packed into compressed 8K metadata blocks. To reduce overhead in inodes, rather than storing the on-disk diff --git a/Documentation/filesystems/sysfs.txt b/Documentation/filesystems/sysfs.txt index f806e50aaa63..597f728e7b4e 100644 --- a/Documentation/filesystems/sysfs.txt +++ b/Documentation/filesystems/sysfs.txt @@ -62,7 +62,7 @@ values of the same type. Mixing types, expressing multiple lines of data, and doing fancy formatting of data is heavily frowned upon. Doing these things may get -you publically humiliated and your code rewritten without notice. +you publicly humiliated and your code rewritten without notice. An attribute definition is simply: diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index 306f0ae8df09..21a7dc467bba 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -97,7 +97,7 @@ functions: The passed struct file_system_type describes your filesystem. When a request is made to mount a filesystem onto a directory in your namespace, the VFS will call the appropriate mount() method for the specific -filesystem. New vfsmount refering to the tree returned by ->mount() +filesystem. New vfsmount referring to the tree returned by ->mount() will be attached to the mountpoint, so that when pathname resolution reaches the mountpoint it will jump into the root of that vfsmount. @@ -254,7 +254,7 @@ or bottom half). should be synchronous or not, not all filesystems check this flag. drop_inode: called when the last access to the inode is dropped, - with the inode_lock spinlock held. + with the inode->i_lock spinlock held. This method should be either NULL (normal UNIX filesystem semantics) or "generic_delete_inode" (for filesystems that do not diff --git a/Documentation/filesystems/xfs-delayed-logging-design.txt b/Documentation/filesystems/xfs-delayed-logging-design.txt index 7445bf335dae..2ce36439c09f 100644 --- a/Documentation/filesystems/xfs-delayed-logging-design.txt +++ b/Documentation/filesystems/xfs-delayed-logging-design.txt @@ -42,7 +42,7 @@ the aggregation of all the previous changes currently held only in the log. This relogging technique also allows objects to be moved forward in the log so that an object being relogged does not prevent the tail of the log from ever moving forward. This can be seen in the table above by the changing -(increasing) LSN of each subsquent transaction - the LSN is effectively a +(increasing) LSN of each subsequent transaction - the LSN is effectively a direct encoding of the location in the log of the transaction. This relogging is also used to implement long-running, multiple-commit @@ -338,7 +338,7 @@ the same time another transaction modifies the item and inserts the log item into the new CIL, then checkpoint transaction commit code cannot use log items to store the list of log vectors that need to be written into the transaction. Hence log vectors need to be able to be chained together to allow them to be -detatched from the log items. That is, when the CIL is flushed the memory +detached from the log items. That is, when the CIL is flushed the memory buffer and log vector attached to each log item needs to be attached to the checkpoint context so that the log item can be released. In diagrammatic form, the CIL would look like this before the flush: @@ -577,7 +577,7 @@ only becomes unpinned when all the transactions complete and there are no pending transactions. Thus the pinning and unpinning of a log item is symmetric as there is a 1:1 relationship with transaction commit and log item completion. -For delayed logging, however, we have an assymetric transaction commit to +For delayed logging, however, we have an asymmetric transaction commit to completion relationship. Every time an object is relogged in the CIL it goes through the commit process without a corresponding completion being registered. That is, we now have a many-to-one relationship between transaction commit and @@ -780,7 +780,7 @@ With delayed logging, there are new steps inserted into the life cycle: From this, it can be seen that the only life cycle differences between the two logging methods are in the middle of the life cycle - they still have the same beginning and end and execution constraints. The only differences are in the -commiting of the log items to the log itself and the completion processing. +committing of the log items to the log itself and the completion processing. Hence delayed logging should not introduce any constraints on log item behaviour, allocation or freeing that don't already exist. @@ -791,10 +791,3 @@ mount option. Fundamentally, there is no reason why the log manager would not be able to swap methods automatically and transparently depending on load characteristics, but this should not be necessary if delayed logging works as designed. - -Roadmap: - -2.6.39 Switch default mount option to use delayed logging - => should be roughly 12 months after initial merge - => enough time to shake out remaining problems before next round of - enterprise distro kernel rebases diff --git a/Documentation/flexible-arrays.txt b/Documentation/flexible-arrays.txt index cb8a3a00cc92..df904aec9904 100644 --- a/Documentation/flexible-arrays.txt +++ b/Documentation/flexible-arrays.txt @@ -66,10 +66,10 @@ trick is to ensure that any needed memory allocations are done before entering atomic context, using: int flex_array_prealloc(struct flex_array *array, unsigned int start, - unsigned int end, gfp_t flags); + unsigned int nr_elements, gfp_t flags); This function will ensure that memory for the elements indexed in the range -defined by start and end has been allocated. Thereafter, a +defined by start and nr_elements has been allocated. Thereafter, a flex_array_put() call on an element in that range is guaranteed not to block. diff --git a/Documentation/usb/hiddev.txt b/Documentation/hid/hiddev.txt index 6e8c9f1d2f22..6e8c9f1d2f22 100644 --- a/Documentation/usb/hiddev.txt +++ b/Documentation/hid/hiddev.txt diff --git a/Documentation/hid/hidraw.txt b/Documentation/hid/hidraw.txt new file mode 100644 index 000000000000..029e6cb9a7e8 --- /dev/null +++ b/Documentation/hid/hidraw.txt @@ -0,0 +1,119 @@ + HIDRAW - Raw Access to USB and Bluetooth Human Interface Devices + ================================================================== + +The hidraw driver provides a raw interface to USB and Bluetooth Human +Interface Devices (HIDs). It differs from hiddev in that reports sent and +received are not parsed by the HID parser, but are sent to and received from +the device unmodified. + +Hidraw should be used if the userspace application knows exactly how to +communicate with the hardware device, and is able to construct the HID +reports manually. This is often the case when making userspace drivers for +custom HID devices. + +Hidraw is also useful for communicating with non-conformant HID devices +which send and receive data in a way that is inconsistent with their report +descriptors. Because hiddev parses reports which are sent and received +through it, checking them against the device's report descriptor, such +communication with these non-conformant devices is impossible using hiddev. +Hidraw is the only alternative, short of writing a custom kernel driver, for +these non-conformant devices. + +A benefit of hidraw is that its use by userspace applications is independent +of the underlying hardware type. Currently, Hidraw is implemented for USB +and Bluetooth. In the future, as new hardware bus types are developed which +use the HID specification, hidraw will be expanded to add support for these +new bus types. + +Hidraw uses a dynamic major number, meaning that udev should be relied on to +create hidraw device nodes. Udev will typically create the device nodes +directly under /dev (eg: /dev/hidraw0). As this location is distribution- +and udev rule-dependent, applications should use libudev to locate hidraw +devices attached to the system. There is a tutorial on libudev with a +working example at: + http://www.signal11.us/oss/udev/ + +The HIDRAW API +--------------- + +read() +------- +read() will read a queued report received from the HID device. On USB +devices, the reports read using read() are the reports sent from the device +on the INTERRUPT IN endpoint. By default, read() will block until there is +a report available to be read. read() can be made non-blocking, by passing +the O_NONBLOCK flag to open(), or by setting the O_NONBLOCK flag using +fcntl(). + +On a device which uses numbered reports, the first byte of the returned data +will be the report number; the report data follows, beginning in the second +byte. For devices which do not use numbered reports, the report data +will begin at the first byte. + +write() +-------- +The write() function will write a report to the device. For USB devices, if +the device has an INTERRUPT OUT endpoint, the report will be sent on that +endpoint. If it does not, the report will be sent over the control endpoint, +using a SET_REPORT transfer. + +The first byte of the buffer passed to write() should be set to the report +number. If the device does not use numbered reports, the first byte should +be set to 0. The report data itself should begin at the second byte. + +ioctl() +-------- +Hidraw supports the following ioctls: + +HIDIOCGRDESCSIZE: Get Report Descriptor Size +This ioctl will get the size of the device's report descriptor. + +HIDIOCGRDESC: Get Report Descriptor +This ioctl returns the device's report descriptor using a +hidraw_report_descriptor struct. Make sure to set the size field of the +hidraw_report_descriptor struct to the size returned from HIDIOCGRDESCSIZE. + +HIDIOCGRAWINFO: Get Raw Info +This ioctl will return a hidraw_devinfo struct containing the bus type, the +vendor ID (VID), and product ID (PID) of the device. The bus type can be one +of: + BUS_USB + BUS_HIL + BUS_BLUETOOTH + BUS_VIRTUAL +which are defined in linux/input.h. + +HIDIOCGRAWNAME(len): Get Raw Name +This ioctl returns a string containing the vendor and product strings of +the device. The returned string is Unicode, UTF-8 encoded. + +HIDIOCGRAWPHYS(len): Get Physical Address +This ioctl returns a string representing the physical address of the device. +For USB devices, the string contains the physical path to the device (the +USB controller, hubs, ports, etc). For Bluetooth devices, the string +contains the hardware (MAC) address of the device. + +HIDIOCSFEATURE(len): Send a Feature Report +This ioctl will send a feature report to the device. Per the HID +specification, feature reports are always sent using the control endpoint. +Set the first byte of the supplied buffer to the report number. For devices +which do not use numbered reports, set the first byte to 0. The report data +begins in the second byte. Make sure to set len accordingly, to one more +than the length of the report (to account for the report number). + +HIDIOCGFEATURE(len): Get a Feature Report +This ioctl will request a feature report from the device using the control +endpoint. The first byte of the supplied buffer should be set to the report +number of the requested report. For devices which do not use numbered +reports, set the first byte to 0. The report will be returned starting at +the first byte of the buffer (ie: the report number is not returned). + +Example +--------- +In samples/, find hid-example.c, which shows examples of read(), write(), +and all the ioctls for hidraw. The code may be used by anyone for any +purpose, and can serve as a starting point for developing applications using +hidraw. + +Document by: + Alan Ott <alan@signal11.us>, Signal 11 Software diff --git a/Documentation/hwmon/abituguru b/Documentation/hwmon/abituguru index 5eb3b9d5f0d5..915f32063a26 100644 --- a/Documentation/hwmon/abituguru +++ b/Documentation/hwmon/abituguru @@ -78,7 +78,7 @@ motherboards (most modern Abit motherboards). The first and second revision of the uGuru chip in reality is a Winbond W83L950D in disguise (despite Abit claiming it is "a new microprocessor -designed by the ABIT Engineers"). Unfortunatly this doesn't help since the +designed by the ABIT Engineers"). Unfortunately this doesn't help since the W83L950D is a generic microcontroller with a custom Abit application running on it. diff --git a/Documentation/hwmon/abituguru-datasheet b/Documentation/hwmon/abituguru-datasheet index d9251efdcec7..8d2be8a0b1e3 100644 --- a/Documentation/hwmon/abituguru-datasheet +++ b/Documentation/hwmon/abituguru-datasheet @@ -5,9 +5,9 @@ First of all, what I know about uGuru is no fact based on any help, hints or datasheet from Abit. The data I have got on uGuru have I assembled through my weak knowledge in "backwards engineering". And just for the record, you may have noticed uGuru isn't a chip developed by -Abit, as they claim it to be. It's realy just an microprocessor (uC) created by +Abit, as they claim it to be. It's really just an microprocessor (uC) created by Winbond (W83L950D). And no, reading the manual for this specific uC or -mailing Windbond for help won't give any usefull data about uGuru, as it is +mailing Windbond for help won't give any useful data about uGuru, as it is the program inside the uC that is responding to calls. Olle Sandberg <ollebull@gmail.com>, 2005-05-25 @@ -41,7 +41,7 @@ later on attached again data-port will hold 0x08, more about this later. After wider testing of the Linux kernel driver some variants of the uGuru have turned up which will hold 0x00 instead of 0xAC at the CMD port, thus we also -have to test CMD for two different values. On these uGuru's DATA will initally +have to test CMD for two different values. On these uGuru's DATA will initially hold 0x09 and will only hold 0x08 after reading CMD first, so CMD must be read first! @@ -308,5 +308,5 @@ the voltage / clock programming out, I tried reading and only reading banks resulted in a _permanent_ reprogramming of the voltages, luckily I had the sensors part configured so that it would shutdown my system on any out of spec voltages which proprably safed my computer (after a reboot I managed to -immediatly enter the bios and reload the defaults). This probably means that +immediately enter the bios and reload the defaults). This probably means that the read/write cycle for the non sensor part is different from the sensor part. diff --git a/Documentation/hwmon/abituguru3 b/Documentation/hwmon/abituguru3 index fa598aac22fa..a6ccfe4bb6aa 100644 --- a/Documentation/hwmon/abituguru3 +++ b/Documentation/hwmon/abituguru3 @@ -47,7 +47,7 @@ This driver supports the hardware monitoring features of the third revision of the Abit uGuru chip, found on recent Abit uGuru featuring motherboards. The 3rd revision of the uGuru chip in reality is a Winbond W83L951G. -Unfortunatly this doesn't help since the W83L951G is a generic microcontroller +Unfortunately this doesn't help since the W83L951G is a generic microcontroller with a custom Abit application running on it. Despite Abit not releasing any information regarding the uGuru revision 3, diff --git a/Documentation/hwmon/adm1021 b/Documentation/hwmon/adm1021 index 03d02bfb3df1..02ad96cf9b2b 100644 --- a/Documentation/hwmon/adm1021 +++ b/Documentation/hwmon/adm1021 @@ -14,10 +14,6 @@ Supported chips: Prefix: 'gl523sm' Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e Datasheet: - * Intel Xeon Processor - Prefix: - any other - may require 'force_adm1021' parameter - Addresses scanned: none - Datasheet: Publicly available at Intel website * Maxim MAX1617 Prefix: 'max1617' Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e @@ -91,21 +87,27 @@ will do no harm, but will return 'old' values. It is possible to make ADM1021-clones do faster measurements, but there is really no good reason for that. -Xeon support ------------- -Some Xeon processors have real max1617, adm1021, or compatible chips -within them, with two temperature sensors. +Netburst-based Xeon support +--------------------------- -Other Xeons have chips with only one sensor. +Some Xeon processors based on the Netburst (early Pentium 4, from 2001 to +2003) microarchitecture had real MAX1617, ADM1021, or compatible chips +within them, with two temperature sensors. Other Xeon processors of this +era (with 400 MHz FSB) had chips with only one temperature sensor. -If you have a Xeon, and the adm1021 module loads, and both temperatures -appear valid, then things are good. +If you have such an old Xeon, and you get two valid temperatures when +loading the adm1021 module, then things are good. -If the adm1021 module doesn't load, you should try this: - modprobe adm1021 force_adm1021=BUS,ADDRESS - ADDRESS can only be 0x18, 0x1a, 0x29, 0x2b, 0x4c, or 0x4e. +If nothing happens when loading the adm1021 module, and you are certain +that your specific Xeon processor model includes compatible sensors, you +will have to explicitly instantiate the sensor chips from user-space. See +method 4 in Documentation/i2c/instantiating-devices. Possible slave +addresses are 0x18, 0x1a, 0x29, 0x2b, 0x4c, or 0x4e. It is likely that +only temp2 will be correct and temp1 will have to be ignored. -If you have dual Xeons you may have appear to have two separate -adm1021-compatible chips, or two single-temperature sensors, at distinct -addresses. +Previous generations of the Xeon processor (based on Pentium II/III) +didn't have these sensors. Next generations of Xeon processors (533 MHz +FSB and faster) lost them, until the Core-based generation which +introduced integrated digital thermal sensors. These are supported by +the coretemp driver. diff --git a/Documentation/hwmon/ads1015 b/Documentation/hwmon/ads1015 new file mode 100644 index 000000000000..f6fe9c203733 --- /dev/null +++ b/Documentation/hwmon/ads1015 @@ -0,0 +1,72 @@ +Kernel driver ads1015 +===================== + +Supported chips: + * Texas Instruments ADS1015 + Prefix: 'ads1015' + Datasheet: Publicly available at the Texas Instruments website : + http://focus.ti.com/lit/ds/symlink/ads1015.pdf + +Authors: + Dirk Eibach, Guntermann & Drunck GmbH <eibach@gdsys.de> + +Description +----------- + +This driver implements support for the Texas Instruments ADS1015. + +This device is a 12-bit A-D converter with 4 inputs. + +The inputs can be used single ended or in certain differential combinations. + +The inputs can be made available by 8 sysfs input files in0_input - in7_input: +in0: Voltage over AIN0 and AIN1. +in1: Voltage over AIN0 and AIN3. +in2: Voltage over AIN1 and AIN3. +in3: Voltage over AIN2 and AIN3. +in4: Voltage over AIN0 and GND. +in5: Voltage over AIN1 and GND. +in6: Voltage over AIN2 and GND. +in7: Voltage over AIN3 and GND. + +Which inputs are available can be configured using platform data or devicetree. + +By default all inputs are exported. + +Platform Data +------------- + +In linux/i2c/ads1015.h platform data is defined, channel_data contains +configuration data for the used input combinations: +- pga is the programmable gain amplifier (values are full scale) + 0: +/- 6.144 V + 1: +/- 4.096 V + 2: +/- 2.048 V + 3: +/- 1.024 V + 4: +/- 0.512 V + 5: +/- 0.256 V +- data_rate in samples per second + 0: 128 + 1: 250 + 2: 490 + 3: 920 + 4: 1600 + 5: 2400 + 6: 3300 + +Example: +struct ads1015_platform_data data = { + .channel_data = { + [2] = { .enabled = true, .pga = 1, .data_rate = 0 }, + [4] = { .enabled = true, .pga = 4, .data_rate = 5 }, + } +}; + +In this case only in2_input (FS +/- 4.096 V, 128 SPS) and in4_input +(FS +/- 0.512 V, 2400 SPS) would be created. + +Devicetree +---------- + +Configuration is also possible via devicetree: +Documentation/devicetree/bindings/hwmon/ads1015.txt diff --git a/Documentation/hwmon/f71882fg b/Documentation/hwmon/f71882fg index 4d0bc70f1852..df02245d1419 100644 --- a/Documentation/hwmon/f71882fg +++ b/Documentation/hwmon/f71882fg @@ -2,6 +2,10 @@ Kernel driver f71882fg ====================== Supported chips: + * Fintek F71808E + Prefix: 'f71808e' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Not public * Fintek F71858FG Prefix: 'f71858fg' Addresses scanned: none, address read from Super I/O config space @@ -26,10 +30,25 @@ Supported chips: Prefix: 'f71889ed' Addresses scanned: none, address read from Super I/O config space Datasheet: Should become available on the Fintek website soon + * Fintek F71889A + Prefix: 'f71889a' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Should become available on the Fintek website soon * Fintek F8000 Prefix: 'f8000' Addresses scanned: none, address read from Super I/O config space Datasheet: Not public + * Fintek F81801U + Prefix: 'f71889fg' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Not public + Note: This is the 64-pin variant of the F71889FG, they have the + same device ID and are fully compatible as far as hardware + monitoring is concerned. + * Fintek F81865F + Prefix: 'f81865f' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Available from the Fintek website Author: Hans de Goede <hdegoede@redhat.com> diff --git a/Documentation/hwmon/lm75 b/Documentation/hwmon/lm75 index 8e6356fe05d7..a1790401fdde 100644 --- a/Documentation/hwmon/lm75 +++ b/Documentation/hwmon/lm75 @@ -7,6 +7,11 @@ Supported chips: Addresses scanned: I2C 0x48 - 0x4f Datasheet: Publicly available at the National Semiconductor website http://www.national.com/ + * National Semiconductor LM75A + Prefix: 'lm75a' + Addresses scanned: I2C 0x48 - 0x4f + Datasheet: Publicly available at the National Semiconductor website + http://www.national.com/ * Dallas Semiconductor DS75 Prefix: 'lm75' Addresses scanned: I2C 0x48 - 0x4f diff --git a/Documentation/hwmon/lm90 b/Documentation/hwmon/lm90 index fa475c0a48a3..f3efd18e87f4 100644 --- a/Documentation/hwmon/lm90 +++ b/Documentation/hwmon/lm90 @@ -32,6 +32,16 @@ Supported chips: Addresses scanned: I2C 0x4c and 0x4d Datasheet: Publicly available at the ON Semiconductor website http://www.onsemi.com/PowerSolutions/product.do?id=ADT7461 + * Analog Devices ADT7461A + Prefix: 'adt7461a' + Addresses scanned: I2C 0x4c and 0x4d + Datasheet: Publicly available at the ON Semiconductor website + http://www.onsemi.com/PowerSolutions/product.do?id=ADT7461A + * ON Semiconductor NCT1008 + Prefix: 'nct1008' + Addresses scanned: I2C 0x4c and 0x4d + Datasheet: Publicly available at the ON Semiconductor website + http://www.onsemi.com/PowerSolutions/product.do?id=NCT1008 * Maxim MAX6646 Prefix: 'max6646' Addresses scanned: I2C 0x4d @@ -149,7 +159,7 @@ ADM1032: * ALERT is triggered by open remote sensor. * SMBus PEC support for Write Byte and Receive Byte transactions. -ADT7461: +ADT7461, ADT7461A, NCT1008: * Extended temperature range (breaks compatibility) * Lower resolution for remote temperature @@ -195,9 +205,9 @@ are exported, one for each channel, but these values are of course linked. Only the local hysteresis can be set from user-space, and the same delta applies to the remote hysteresis. -The lm90 driver will not update its values more frequently than every -other second; reading them more often will do no harm, but will return -'old' values. +The lm90 driver will not update its values more frequently than configured with +the update_interval attribute; reading them more often will do no harm, but will +return 'old' values. SMBus Alert Support ------------------- @@ -205,11 +215,12 @@ SMBus Alert Support This driver has basic support for SMBus alert. When an alert is received, the status register is read and the faulty temperature channel is logged. -The Analog Devices chips (ADM1032 and ADT7461) do not implement the SMBus -alert protocol properly so additional care is needed: the ALERT output is -disabled when an alert is received, and is re-enabled only when the alarm -is gone. Otherwise the chip would block alerts from other chips in the bus -as long as the alarm is active. +The Analog Devices chips (ADM1032, ADT7461 and ADT7461A) and ON +Semiconductor chips (NCT1008) do not implement the SMBus alert protocol +properly so additional care is needed: the ALERT output is disabled when +an alert is received, and is re-enabled only when the alarm is gone. +Otherwise the chip would block alerts from other chips in the bus as long +as the alarm is active. PEC Support ----------- diff --git a/Documentation/hwmon/max16064 b/Documentation/hwmon/max16064 new file mode 100644 index 000000000000..41728999e142 --- /dev/null +++ b/Documentation/hwmon/max16064 @@ -0,0 +1,62 @@ +Kernel driver max16064 +====================== + +Supported chips: + * Maxim MAX16064 + Prefix: 'max16064' + Addresses scanned: - + Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX16064.pdf + +Author: Guenter Roeck <guenter.roeck@ericsson.com> + + +Description +----------- + +This driver supports hardware montoring for Maxim MAX16064 Quad Power-Supply +Controller with Active-Voltage Output Control and PMBus Interface. + +The driver is a client driver to the core PMBus driver. +Please see Documentation/hwmon/pmbus for details on PMBus client drivers. + + +Usage Notes +----------- + +This driver does not auto-detect devices. You will have to instantiate the +devices explicitly. Please see Documentation/i2c/instantiating-devices for +details. + + +Platform data support +--------------------- + +The driver supports standard PMBus driver platform data. + + +Sysfs entries +------------- + +The following attributes are supported. Limits are read-write; all other +attributes are read-only. + +in[1-4]_label "vout[1-4]" +in[1-4]_input Measured voltage. From READ_VOUT register. +in[1-4]_min Minumum Voltage. From VOUT_UV_WARN_LIMIT register. +in[1-4]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register. +in[1-4]_lcrit Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register. +in[1-4]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register. +in[1-4]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status. +in[1-4]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status. +in[1-4]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT status. +in[1-4]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status. + +temp1_input Measured temperature. From READ_TEMPERATURE_1 register. +temp1_max Maximum temperature. From OT_WARN_LIMIT register. +temp1_crit Critical high temperature. From OT_FAULT_LIMIT register. +temp1_max_alarm Chip temperature high alarm. Set by comparing + READ_TEMPERATURE_1 with OT_WARN_LIMIT if TEMP_OT_WARNING + status is set. +temp1_crit_alarm Chip temperature critical high alarm. Set by comparing + READ_TEMPERATURE_1 with OT_FAULT_LIMIT if TEMP_OT_FAULT + status is set. diff --git a/Documentation/hwmon/max34440 b/Documentation/hwmon/max34440 new file mode 100644 index 000000000000..6c525dd07d59 --- /dev/null +++ b/Documentation/hwmon/max34440 @@ -0,0 +1,79 @@ +Kernel driver max34440 +====================== + +Supported chips: + * Maxim MAX34440 + Prefixes: 'max34440' + Addresses scanned: - + Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX34440.pdf + * Maxim MAX34441 + PMBus 5-Channel Power-Supply Manager and Intelligent Fan Controller + Prefixes: 'max34441' + Addresses scanned: - + Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX34441.pdf + +Author: Guenter Roeck <guenter.roeck@ericsson.com> + + +Description +----------- + +This driver supports hardware montoring for Maxim MAX34440 PMBus 6-Channel +Power-Supply Manager and MAX34441 PMBus 5-Channel Power-Supply Manager +and Intelligent Fan Controller. + +The driver is a client driver to the core PMBus driver. Please see +Documentation/hwmon/pmbus for details on PMBus client drivers. + + +Usage Notes +----------- + +This driver does not auto-detect devices. You will have to instantiate the +devices explicitly. Please see Documentation/i2c/instantiating-devices for +details. + + +Platform data support +--------------------- + +The driver supports standard PMBus driver platform data. + + +Sysfs entries +------------- + +The following attributes are supported. Limits are read-write; all other +attributes are read-only. + +in[1-6]_label "vout[1-6]". +in[1-6]_input Measured voltage. From READ_VOUT register. +in[1-6]_min Minumum Voltage. From VOUT_UV_WARN_LIMIT register. +in[1-6]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register. +in[1-6]_lcrit Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register. +in[1-6]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register. +in[1-6]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status. +in[1-6]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status. +in[1-6]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT status. +in[1-6]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status. + +curr[1-6]_label "iout[1-6]". +curr[1-6]_input Measured current. From READ_IOUT register. +curr[1-6]_max Maximum current. From IOUT_OC_WARN_LIMIT register. +curr[1-6]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register. +curr[1-6]_max_alarm Current high alarm. From IOUT_OC_WARNING status. +curr[1-6]_crit_alarm Current critical high alarm. From IOUT_OC_FAULT status. + + in6 and curr6 attributes only exist for MAX34440. + +temp[1-8]_input Measured temperatures. From READ_TEMPERATURE_1 register. + temp1 is the chip's internal temperature. temp2..temp5 + are remote I2C temperature sensors. For MAX34441, temp6 + is a remote thermal-diode sensor. For MAX34440, temp6..8 + are remote I2C temperature sensors. +temp[1-8]_max Maximum temperature. From OT_WARN_LIMIT register. +temp[1-8]_crit Critical high temperature. From OT_FAULT_LIMIT register. +temp[1-8]_max_alarm Temperature high alarm. +temp[1-8]_crit_alarm Temperature critical high alarm. + + temp7 and temp8 attributes only exist for MAX34440. diff --git a/Documentation/hwmon/max8688 b/Documentation/hwmon/max8688 new file mode 100644 index 000000000000..0ddd3a412030 --- /dev/null +++ b/Documentation/hwmon/max8688 @@ -0,0 +1,69 @@ +Kernel driver max8688 +===================== + +Supported chips: + * Maxim MAX8688 + Prefix: 'max8688' + Addresses scanned: - + Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX8688.pdf + +Author: Guenter Roeck <guenter.roeck@ericsson.com> + + +Description +----------- + +This driver supports hardware montoring for Maxim MAX8688 Digital Power-Supply +Controller/Monitor with PMBus Interface. + +The driver is a client driver to the core PMBus driver. Please see +Documentation/hwmon/pmbus for details on PMBus client drivers. + + +Usage Notes +----------- + +This driver does not auto-detect devices. You will have to instantiate the +devices explicitly. Please see Documentation/i2c/instantiating-devices for +details. + + +Platform data support +--------------------- + +The driver supports standard PMBus driver platform data. + + +Sysfs entries +------------- + +The following attributes are supported. Limits are read-write; all other +attributes are read-only. + +in1_label "vout1" +in1_input Measured voltage. From READ_VOUT register. +in1_min Minumum Voltage. From VOUT_UV_WARN_LIMIT register. +in1_max Maximum voltage. From VOUT_OV_WARN_LIMIT register. +in1_lcrit Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register. +in1_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register. +in1_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status. +in1_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status. +in1_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT status. +in1_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status. + +curr1_label "iout1" +curr1_input Measured current. From READ_IOUT register. +curr1_max Maximum current. From IOUT_OC_WARN_LIMIT register. +curr1_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register. +curr1_max_alarm Current high alarm. From IOUT_OC_WARN_LIMIT register. +curr1_crit_alarm Current critical high alarm. From IOUT_OC_FAULT status. + +temp1_input Measured temperature. From READ_TEMPERATURE_1 register. +temp1_max Maximum temperature. From OT_WARN_LIMIT register. +temp1_crit Critical high temperature. From OT_FAULT_LIMIT register. +temp1_max_alarm Chip temperature high alarm. Set by comparing + READ_TEMPERATURE_1 with OT_WARN_LIMIT if TEMP_OT_WARNING + status is set. +temp1_crit_alarm Chip temperature critical high alarm. Set by comparing + READ_TEMPERATURE_1 with OT_FAULT_LIMIT if TEMP_OT_FAULT + status is set. diff --git a/Documentation/hwmon/pmbus b/Documentation/hwmon/pmbus index f2d42e8bdf48..5e462fc7f99b 100644 --- a/Documentation/hwmon/pmbus +++ b/Documentation/hwmon/pmbus @@ -13,26 +13,6 @@ Supported chips: Prefix: 'ltc2978' Addresses scanned: - Datasheet: http://cds.linear.com/docs/Datasheet/2978fa.pdf - * Maxim MAX16064 - Quad Power-Supply Controller - Prefix: 'max16064' - Addresses scanned: - - Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX16064.pdf - * Maxim MAX34440 - PMBus 6-Channel Power-Supply Manager - Prefixes: 'max34440' - Addresses scanned: - - Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX34440.pdf - * Maxim MAX34441 - PMBus 5-Channel Power-Supply Manager and Intelligent Fan Controller - Prefixes: 'max34441' - Addresses scanned: - - Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX34441.pdf - * Maxim MAX8688 - Digital Power-Supply Controller/Monitor - Prefix: 'max8688' - Addresses scanned: - - Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX8688.pdf * Generic PMBus devices Prefix: 'pmbus' Addresses scanned: - @@ -150,11 +130,11 @@ The following attributes are supported. Limits are read-write; all other attributes are read-only. inX_input Measured voltage. From READ_VIN or READ_VOUT register. -inX_min Minumum Voltage. +inX_min Minimum Voltage. From VIN_UV_WARN_LIMIT or VOUT_UV_WARN_LIMIT register. inX_max Maximum voltage. From VIN_OV_WARN_LIMIT or VOUT_OV_WARN_LIMIT register. -inX_lcrit Critical minumum Voltage. +inX_lcrit Critical minimum Voltage. From VIN_UV_FAULT_LIMIT or VOUT_UV_FAULT_LIMIT register. inX_crit Critical maximum voltage. From VIN_OV_FAULT_LIMIT or VOUT_OV_FAULT_LIMIT register. @@ -169,17 +149,19 @@ inX_label "vin", "vcap", or "voutY" currX_input Measured current. From READ_IIN or READ_IOUT register. currX_max Maximum current. From IIN_OC_WARN_LIMIT or IOUT_OC_WARN_LIMIT register. -currX_lcrit Critical minumum output current. +currX_lcrit Critical minimum output current. From IOUT_UC_FAULT_LIMIT register. currX_crit Critical maximum current. From IIN_OC_FAULT_LIMIT or IOUT_OC_FAULT_LIMIT register. currX_alarm Current high alarm. From IIN_OC_WARNING or IOUT_OC_WARNING status. +currX_max_alarm Current high alarm. + From IIN_OC_WARN_LIMIT or IOUT_OC_WARN_LIMIT status. currX_lcrit_alarm Output current critical low alarm. From IOUT_UC_FAULT status. currX_crit_alarm Current critical high alarm. From IIN_OC_FAULT or IOUT_OC_FAULT status. -currX_label "iin" or "vinY" +currX_label "iin" or "ioutY" powerX_input Measured power. From READ_PIN or READ_POUT register. powerX_cap Output power cap. From POUT_MAX register. @@ -193,13 +175,13 @@ powerX_crit_alarm Output power critical high alarm. From POUT_OP_FAULT status. powerX_label "pin" or "poutY" -tempX_input Measured tempererature. +tempX_input Measured temperature. From READ_TEMPERATURE_X register. -tempX_min Mimimum tempererature. From UT_WARN_LIMIT register. -tempX_max Maximum tempererature. From OT_WARN_LIMIT register. -tempX_lcrit Critical low tempererature. +tempX_min Mimimum temperature. From UT_WARN_LIMIT register. +tempX_max Maximum temperature. From OT_WARN_LIMIT register. +tempX_lcrit Critical low temperature. From UT_FAULT_LIMIT register. -tempX_crit Critical high tempererature. +tempX_crit Critical high temperature. From OT_FAULT_LIMIT register. tempX_min_alarm Chip temperature low alarm. Set by comparing READ_TEMPERATURE_X with UT_WARN_LIMIT if diff --git a/Documentation/hwmon/sch5627 b/Documentation/hwmon/sch5627 new file mode 100644 index 000000000000..446a054e4912 --- /dev/null +++ b/Documentation/hwmon/sch5627 @@ -0,0 +1,22 @@ +Kernel driver sch5627 +===================== + +Supported chips: + * SMSC SCH5627 + Prefix: 'sch5627' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Application Note available upon request + +Author: Hans de Goede <hdegoede@redhat.com> + + +Description +----------- + +SMSC SCH5627 Super I/O chips include complete hardware monitoring +capabilities. They can monitor up to 5 voltages, 4 fans and 8 temperatures. + +The hardware monitoring part of the SMSC SCH5627 is accessed by talking +through an embedded microcontroller. An application note describing the +protocol for communicating with the microcontroller is available upon +request. Please mail me if you want a copy. diff --git a/Documentation/hwmon/smm665 b/Documentation/hwmon/smm665 index 3820fc9ca52d..59e316140542 100644 --- a/Documentation/hwmon/smm665 +++ b/Documentation/hwmon/smm665 @@ -150,8 +150,8 @@ in8_crit_alarm Channel F critical alarm in9_crit_alarm AIN1 critical alarm in10_crit_alarm AIN2 critical alarm -temp1_input Chip tempererature -temp1_min Mimimum chip tempererature -temp1_max Maximum chip tempererature -temp1_crit Critical chip tempererature +temp1_input Chip temperature +temp1_min Mimimum chip temperature +temp1_max Maximum chip temperature +temp1_crit Critical chip temperature temp1_crit_alarm Temperature critical alarm diff --git a/Documentation/hwmon/submitting-patches b/Documentation/hwmon/submitting-patches new file mode 100644 index 000000000000..86f42e8e9e49 --- /dev/null +++ b/Documentation/hwmon/submitting-patches @@ -0,0 +1,109 @@ + How to Get Your Patch Accepted Into the Hwmon Subsystem + ------------------------------------------------------- + +This text is is a collection of suggestions for people writing patches or +drivers for the hwmon subsystem. Following these suggestions will greatly +increase the chances of your change being accepted. + + +1. General +---------- + +* It should be unnecessary to mention, but please read and follow + Documentation/SubmitChecklist + Documentation/SubmittingDrivers + Documentation/SubmittingPatches + Documentation/CodingStyle + +* If your patch generates checkpatch warnings, please refrain from explanations + such as "I don't like that coding style". Keep in mind that each unnecessary + warning helps hiding a real problem. If you don't like the kernel coding + style, don't write kernel drivers. + +* Please test your patch thoroughly. We are not your test group. + Sometimes a patch can not or not completely be tested because of missing + hardware. In such cases, you should test-build the code on at least one + architecture. If run-time testing was not achieved, it should be written + explicitly below the patch header. + +* If your patch (or the driver) is affected by configuration options such as + CONFIG_SMP or CONFIG_HOTPLUG, make sure it compiles for all configuration + variants. + + +2. Adding functionality to existing drivers +------------------------------------------- + +* Make sure the documentation in Documentation/hwmon/<driver_name> is up to + date. + +* Make sure the information in Kconfig is up to date. + +* If the added functionality requires some cleanup or structural changes, split + your patch into a cleanup part and the actual addition. This makes it easier + to review your changes, and to bisect any resulting problems. + +* Never mix bug fixes, cleanup, and functional enhancements in a single patch. + + +3. New drivers +-------------- + +* Running your patch or driver file(s) through checkpatch does not mean its + formatting is clean. If unsure about formatting in your new driver, run it + through Lindent. Lindent is not perfect, and you may have to do some minor + cleanup, but it is a good start. + +* Consider adding yourself to MAINTAINERS. + +* Document the driver in Documentation/hwmon/<driver_name>. + +* Add the driver to Kconfig and Makefile in alphabetical order. + +* Make sure that all dependencies are listed in Kconfig. For new drivers, it + is most likely prudent to add a dependency on EXPERIMENTAL. + +* Avoid forward declarations if you can. Rearrange the code if necessary. + +* Avoid calculations in macros and macro-generated functions. While such macros + may save a line or so in the source, it obfuscates the code and makes code + review more difficult. It may also result in code which is more complicated + than necessary. Use inline functions or just regular functions instead. + +* If the driver has a detect function, make sure it is silent. Debug messages + and messages printed after a successful detection are acceptable, but it + must not print messages such as "Chip XXX not found/supported". + + Keep in mind that the detect function will run for all drivers supporting an + address if a chip is detected on that address. Unnecessary messages will just + pollute the kernel log and not provide any value. + +* Provide a detect function if and only if a chip can be detected reliably. + +* Avoid writing to chip registers in the detect function. If you have to write, + only do it after you have already gathered enough data to be certain that the + detection is going to be successful. + + Keep in mind that the chip might not be what your driver believes it is, and + writing to it might cause a bad misconfiguration. + +* Make sure there are no race conditions in the probe function. Specifically, + completely initialize your chip first, then create sysfs entries and register + with the hwmon subsystem. + +* Do not provide support for deprecated sysfs attributes. + +* Do not create non-standard attributes unless really needed. If you have to use + non-standard attributes, or you believe you do, discuss it on the mailing list + first. Either case, provide a detailed explanation why you need the + non-standard attribute(s). + Standard attributes are specified in Documentation/hwmon/sysfs-interface. + +* When deciding which sysfs attributes to support, look at the chip's + capabilities. While we do not expect your driver to support everything the + chip may offer, it should at least support all limits and alarms. + +* Last but not least, please check if a driver for your chip already exists + before starting to write a new driver. Especially for temperature sensors, + new chips are often variants of previously released chips. In some cases, + a presumably new chip may simply have been relabeled. diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface index 83a698773ade..8f63c244f1aa 100644 --- a/Documentation/hwmon/sysfs-interface +++ b/Documentation/hwmon/sysfs-interface @@ -579,7 +579,7 @@ channel should not be trusted. fan[1-*]_fault temp[1-*]_fault Input fault condition - 0: no fault occured + 0: no fault occurred 1: fault condition RO diff --git a/Documentation/hwmon/twl4030-madc-hwmon b/Documentation/hwmon/twl4030-madc-hwmon new file mode 100644 index 000000000000..ef7984317cec --- /dev/null +++ b/Documentation/hwmon/twl4030-madc-hwmon @@ -0,0 +1,45 @@ +Kernel driver twl4030-madc +========================= + +Supported chips: + * Texas Instruments TWL4030 + Prefix: 'twl4030-madc' + + +Authors: + J Keerthy <j-keerthy@ti.com> + +Description +----------- + +The Texas Instruments TWL4030 is a Power Management and Audio Circuit. Among +other things it contains a 10-bit A/D converter MADC. The converter has 16 +channels which can be used in different modes. + + +See this table for the meaning of the different channels + +Channel Signal +------------------------------------------ +0 Battery type(BTYPE) +1 BCI: Battery temperature (BTEMP) +2 GP analog input +3 GP analog input +4 GP analog input +5 GP analog input +6 GP analog input +7 GP analog input +8 BCI: VBUS voltage(VBUS) +9 Backup Battery voltage (VBKP) +10 BCI: Battery charger current (ICHG) +11 BCI: Battery charger voltage (VCHG) +12 BCI: Main battery voltage (VBAT) +13 Reserved +14 Reserved +15 VRUSB Supply/Speaker left/Speaker right polarization level + + +The Sysfs nodes will represent the voltage in the units of mV, +the temperature channel shows the converted temperature in +degree celcius. The Battery charging current channel represents +battery charging current in mA. diff --git a/Documentation/hwmon/w83781d b/Documentation/hwmon/w83781d index ecbc1e4574b4..129b0a3b555b 100644 --- a/Documentation/hwmon/w83781d +++ b/Documentation/hwmon/w83781d @@ -403,7 +403,7 @@ found out the following values do work as a form of coarse pwm: 0x80 - seems to turn fans off after some time(1-2 minutes)... might be some form of auto-fan-control based on temp? hmm (Qfan? this mobo is an -old ASUS, it isn't marketed as Qfan. Maybe some beta pre-attemp at Qfan +old ASUS, it isn't marketed as Qfan. Maybe some beta pre-attempt at Qfan that was dropped at the BIOS) 0x81 - off 0x82 - slightly "on-ner" than off, but my fans do not get to move. I can diff --git a/Documentation/hwmon/w83791d b/Documentation/hwmon/w83791d index 5663e491655c..90387c3540f7 100644 --- a/Documentation/hwmon/w83791d +++ b/Documentation/hwmon/w83791d @@ -93,7 +93,7 @@ The sysfs interface to the beep bitmask has migrated from the original legacy method of a single sysfs beep_mask file to a newer method using multiple *_beep files as described in .../Documentation/hwmon/sysfs-interface. -A similar change has occured for the bitmap corresponding to the alarms. The +A similar change has occurred for the bitmap corresponding to the alarms. The original legacy method used a single sysfs alarms file containing a bitmap of triggered alarms. The newer method uses multiple sysfs *_alarm files (again following the pattern described in sysfs-interface). diff --git a/Documentation/hwmon/w83795 b/Documentation/hwmon/w83795 new file mode 100644 index 000000000000..9f160371f463 --- /dev/null +++ b/Documentation/hwmon/w83795 @@ -0,0 +1,127 @@ +Kernel driver w83795 +==================== + +Supported chips: + * Winbond/Nuvoton W83795G + Prefix: 'w83795g' + Addresses scanned: I2C 0x2c - 0x2f + Datasheet: Available for download on nuvoton.com + * Winbond/Nuvoton W83795ADG + Prefix: 'w83795adg' + Addresses scanned: I2C 0x2c - 0x2f + Datasheet: Available for download on nuvoton.com + +Authors: + Wei Song (Nuvoton) + Jean Delvare <khali@linux-fr.org> + + +Pin mapping +----------- + +Here is a summary of the pin mapping for the W83795G and W83795ADG. +This can be useful to convert data provided by board manufacturers +into working libsensors configuration statements. + + W83795G | + Pin | Name | Register | Sysfs attribute +------------------------------------------------------------------ + 13 | VSEN1 (VCORE1) | 10h | in0 + 14 | VSEN2 (VCORE2) | 11h | in1 + 15 | VSEN3 (VCORE3) | 12h | in2 + 16 | VSEN4 | 13h | in3 + 17 | VSEN5 | 14h | in4 + 18 | VSEN6 | 15h | in5 + 19 | VSEN7 | 16h | in6 + 20 | VSEN8 | 17h | in7 + 21 | VSEN9 | 18h | in8 + 22 | VSEN10 | 19h | in9 + 23 | VSEN11 | 1Ah | in10 + 28 | VTT | 1Bh | in11 + 24 | 3VDD | 1Ch | in12 + 25 | 3VSB | 1Dh | in13 + 26 | VBAT | 1Eh | in14 + 3 | VSEN12/TR5 | 1Fh | in15/temp5 + 4 | VSEN13/TR5 | 20h | in16/temp6 + 5/ 6 | VDSEN14/TR1/TD1 | 21h | in17/temp1 + 7/ 8 | VDSEN15/TR2/TD2 | 22h | in18/temp2 + 9/ 10 | VDSEN16/TR3/TD3 | 23h | in19/temp3 + 11/ 12 | VDSEN17/TR4/TD4 | 24h | in20/temp4 + 40 | FANIN1 | 2Eh | fan1 + 42 | FANIN2 | 2Fh | fan2 + 44 | FANIN3 | 30h | fan3 + 46 | FANIN4 | 31h | fan4 + 48 | FANIN5 | 32h | fan5 + 50 | FANIN6 | 33h | fan6 + 52 | FANIN7 | 34h | fan7 + 54 | FANIN8 | 35h | fan8 + 57 | FANIN9 | 36h | fan9 + 58 | FANIN10 | 37h | fan10 + 59 | FANIN11 | 38h | fan11 + 60 | FANIN12 | 39h | fan12 + 31 | FANIN13 | 3Ah | fan13 + 35 | FANIN14 | 3Bh | fan14 + 41 | FANCTL1 | 10h (bank 2) | pwm1 + 43 | FANCTL2 | 11h (bank 2) | pwm2 + 45 | FANCTL3 | 12h (bank 2) | pwm3 + 47 | FANCTL4 | 13h (bank 2) | pwm4 + 49 | FANCTL5 | 14h (bank 2) | pwm5 + 51 | FANCTL6 | 15h (bank 2) | pwm6 + 53 | FANCTL7 | 16h (bank 2) | pwm7 + 55 | FANCTL8 | 17h (bank 2) | pwm8 + 29/ 30 | PECI/TSI (DTS1) | 26h | temp7 + 29/ 30 | PECI/TSI (DTS2) | 27h | temp8 + 29/ 30 | PECI/TSI (DTS3) | 28h | temp9 + 29/ 30 | PECI/TSI (DTS4) | 29h | temp10 + 29/ 30 | PECI/TSI (DTS5) | 2Ah | temp11 + 29/ 30 | PECI/TSI (DTS6) | 2Bh | temp12 + 29/ 30 | PECI/TSI (DTS7) | 2Ch | temp13 + 29/ 30 | PECI/TSI (DTS8) | 2Dh | temp14 + 27 | CASEOPEN# | 46h | intrusion0 + + W83795ADG | + Pin | Name | Register | Sysfs attribute +------------------------------------------------------------------ + 10 | VSEN1 (VCORE1) | 10h | in0 + 11 | VSEN2 (VCORE2) | 11h | in1 + 12 | VSEN3 (VCORE3) | 12h | in2 + 13 | VSEN4 | 13h | in3 + 14 | VSEN5 | 14h | in4 + 15 | VSEN6 | 15h | in5 + 16 | VSEN7 | 16h | in6 + 17 | VSEN8 | 17h | in7 + 22 | VTT | 1Bh | in11 + 18 | 3VDD | 1Ch | in12 + 19 | 3VSB | 1Dh | in13 + 20 | VBAT | 1Eh | in14 + 48 | VSEN12/TR5 | 1Fh | in15/temp5 + 1 | VSEN13/TR5 | 20h | in16/temp6 + 2/ 3 | VDSEN14/TR1/TD1 | 21h | in17/temp1 + 4/ 5 | VDSEN15/TR2/TD2 | 22h | in18/temp2 + 6/ 7 | VDSEN16/TR3/TD3 | 23h | in19/temp3 + 8/ 9 | VDSEN17/TR4/TD4 | 24h | in20/temp4 + 32 | FANIN1 | 2Eh | fan1 + 34 | FANIN2 | 2Fh | fan2 + 36 | FANIN3 | 30h | fan3 + 37 | FANIN4 | 31h | fan4 + 38 | FANIN5 | 32h | fan5 + 39 | FANIN6 | 33h | fan6 + 40 | FANIN7 | 34h | fan7 + 41 | FANIN8 | 35h | fan8 + 43 | FANIN9 | 36h | fan9 + 44 | FANIN10 | 37h | fan10 + 45 | FANIN11 | 38h | fan11 + 46 | FANIN12 | 39h | fan12 + 24 | FANIN13 | 3Ah | fan13 + 28 | FANIN14 | 3Bh | fan14 + 33 | FANCTL1 | 10h (bank 2) | pwm1 + 35 | FANCTL2 | 11h (bank 2) | pwm2 + 23 | PECI (DTS1) | 26h | temp7 + 23 | PECI (DTS2) | 27h | temp8 + 23 | PECI (DTS3) | 28h | temp9 + 23 | PECI (DTS4) | 29h | temp10 + 23 | PECI (DTS5) | 2Ah | temp11 + 23 | PECI (DTS6) | 2Bh | temp12 + 23 | PECI (DTS7) | 2Ch | temp13 + 23 | PECI (DTS8) | 2Dh | temp14 + 21 | CASEOPEN# | 46h | intrusion0 diff --git a/Documentation/i2c/busses/i2c-diolan-u2c b/Documentation/i2c/busses/i2c-diolan-u2c new file mode 100644 index 000000000000..30fe4bb9a069 --- /dev/null +++ b/Documentation/i2c/busses/i2c-diolan-u2c @@ -0,0 +1,26 @@ +Kernel driver i2c-diolan-u2c + +Supported adapters: + * Diolan U2C-12 I2C-USB adapter + Documentation: + http://www.diolan.com/i2c/u2c12.html + +Author: Guenter Roeck <guenter.roeck@ericsson.com> + +Description +----------- + +This is the driver for the Diolan U2C-12 USB-I2C adapter. + +The Diolan U2C-12 I2C-USB Adapter provides a low cost solution to connect +a computer to I2C slave devices using a USB interface. It also supports +connectivity to SPI devices. + +This driver only supports the I2C interface of U2C-12. The driver does not use +interrupts. + + +Module parameters +----------------- + +* frequency: I2C bus frequency diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801 index 93fe76e56522..6df69765ccb7 100644 --- a/Documentation/i2c/busses/i2c-i801 +++ b/Documentation/i2c/busses/i2c-i801 @@ -16,8 +16,9 @@ Supported adapters: * Intel EP80579 (Tolapai) * Intel 82801JI (ICH10) * Intel 5/3400 Series (PCH) - * Intel Cougar Point (PCH) + * Intel 6 Series (PCH) * Intel Patsburg (PCH) + * Intel DH89xxCC (PCH) Datasheets: Publicly available at the Intel website On Intel Patsburg and later chipsets, both the normal host SMBus controller diff --git a/Documentation/i2c/busses/i2c-parport-light b/Documentation/i2c/busses/i2c-parport-light index bdc9cbb2e0f2..c22ee063e1e5 100644 --- a/Documentation/i2c/busses/i2c-parport-light +++ b/Documentation/i2c/busses/i2c-parport-light @@ -4,7 +4,7 @@ Author: Jean Delvare <khali@linux-fr.org> This driver is a light version of i2c-parport. It doesn't depend on the parport driver, and uses direct I/O access instead. This might be -prefered on embedded systems where wasting memory for the clean but heavy +preferred on embedded systems where wasting memory for the clean but heavy parport handling is not an option. The drawback is a reduced portability and the impossibility to daisy-chain other parallel port devices. diff --git a/Documentation/i2c/busses/i2c-sis96x b/Documentation/i2c/busses/i2c-sis96x index 70e6a0cc1e15..0b979f3252a4 100644 --- a/Documentation/i2c/busses/i2c-sis96x +++ b/Documentation/i2c/busses/i2c-sis96x @@ -35,7 +35,7 @@ or perhaps this... (kernel versions later than 2.4.18 may fill in the "Unknown"s) -If you cant see it please look on quirk_sis_96x_smbus +If you can't see it please look on quirk_sis_96x_smbus (drivers/pci/quirks.c) (also if southbridge detection fails) I suspect that this driver could be made to work for the following SiS diff --git a/Documentation/i2c/busses/i2c-taos-evm b/Documentation/i2c/busses/i2c-taos-evm index 9146e33be6dd..63f62bcbf592 100644 --- a/Documentation/i2c/busses/i2c-taos-evm +++ b/Documentation/i2c/busses/i2c-taos-evm @@ -13,7 +13,7 @@ Currently supported devices are: * TAOS TSL2550 EVM -For addtional information on TAOS products, please see +For additional information on TAOS products, please see http://www.taosinc.com/ diff --git a/Documentation/i2c/instantiating-devices b/Documentation/i2c/instantiating-devices index 87da405a8597..9edb75d8c9b9 100644 --- a/Documentation/i2c/instantiating-devices +++ b/Documentation/i2c/instantiating-devices @@ -100,7 +100,7 @@ static int __devinit usb_hcd_pnx4008_probe(struct platform_device *pdev) (...) i2c_adap = i2c_get_adapter(2); memset(&i2c_info, 0, sizeof(struct i2c_board_info)); - strlcpy(i2c_info.name, "isp1301_pnx", I2C_NAME_SIZE); + strlcpy(i2c_info.type, "isp1301_pnx", I2C_NAME_SIZE); isp1301_i2c_client = i2c_new_probed_device(i2c_adap, &i2c_info, normal_i2c, NULL); i2c_put_adapter(i2c_adap); diff --git a/Documentation/i2c/upgrading-clients b/Documentation/i2c/upgrading-clients index 9a45f9bb6a25..d6991625c407 100644 --- a/Documentation/i2c/upgrading-clients +++ b/Documentation/i2c/upgrading-clients @@ -61,7 +61,7 @@ static int example_attach(struct i2c_adapter *adap, int addr, int kind) return 0; } -static int __devexit example_detach(struct i2c_client *client) +static int example_detach(struct i2c_client *client) { struct example_state *state = i2c_get_clientdata(client); @@ -81,7 +81,7 @@ static struct i2c_driver example_driver = { .name = "example", }, .attach_adapter = example_attach_adapter, - .detach_client = __devexit_p(example_detach), + .detach_client = example_detach, .suspend = example_suspend, .resume = example_resume, }; @@ -93,7 +93,7 @@ Updating the client The new style binding model will check against a list of supported devices and their associated address supplied by the code registering the busses. This means that the driver .attach_adapter and -.detach_adapter methods can be removed, along with the addr_data, +.detach_client methods can be removed, along with the addr_data, as follows: - static struct i2c_driver example_driver; @@ -110,14 +110,14 @@ as follows: static struct i2c_driver example_driver = { - .attach_adapter = example_attach_adapter, -- .detach_client = __devexit_p(example_detach), +- .detach_client = example_detach, } Add the probe and remove methods to the i2c_driver, as so: static struct i2c_driver example_driver = { + .probe = example_probe, -+ .remove = __devexit_p(example_remove), ++ .remove = example_remove, } Change the example_attach method to accept the new parameters @@ -199,8 +199,8 @@ to delete the i2c_detach_client call. It is possible that you can also remove the ret variable as it is not not needed for any of the core functions. -- static int __devexit example_detach(struct i2c_client *client) -+ static int __devexit example_remove(struct i2c_client *client) +- static int example_detach(struct i2c_client *client) ++ static int example_remove(struct i2c_client *client) { struct example_state *state = i2c_get_clientdata(client); @@ -253,7 +253,7 @@ static int example_probe(struct i2c_client *client, return 0; } -static int __devexit example_remove(struct i2c_client *client) +static int example_remove(struct i2c_client *client) { struct example_state *state = i2c_get_clientdata(client); @@ -275,7 +275,7 @@ static struct i2c_driver example_driver = { }, .id_table = example_idtable, .probe = example_probe, - .remove = __devexit_p(example_remove), + .remove = example_remove, .suspend = example_suspend, .resume = example_resume, }; diff --git a/Documentation/i2o/README b/Documentation/i2o/README index 0ebf58c73f54..ee91e2626ff0 100644 --- a/Documentation/i2o/README +++ b/Documentation/i2o/README @@ -53,7 +53,7 @@ Symbios Logic (Now LSI) BoxHill Corporation Loan of initial FibreChannel disk array used for development work. -European Comission +European Commission Funding the work done by the University of Helsinki SysKonnect diff --git a/Documentation/ia64/aliasing-test.c b/Documentation/ia64/aliasing-test.c index 3dfb76ca6931..5caa2af33207 100644 --- a/Documentation/ia64/aliasing-test.c +++ b/Documentation/ia64/aliasing-test.c @@ -177,7 +177,7 @@ static int scan_rom(char *path, char *file) /* * It's OK if the ROM is unreadable. Maybe there - * is no ROM, or some other error ocurred. The + * is no ROM, or some other error occurred. The * important thing is that no MCA happened. */ if (rc > 0) diff --git a/Documentation/input/event-codes.txt b/Documentation/input/event-codes.txt new file mode 100644 index 000000000000..23fcb05175be --- /dev/null +++ b/Documentation/input/event-codes.txt @@ -0,0 +1,262 @@ +The input protocol uses a map of types and codes to express input device values +to userspace. This document describes the types and codes and how and when they +may be used. + +A single hardware event generates multiple input events. Each input event +contains the new value of a single data item. A special event type, EV_SYN, is +used to separate input events into packets of input data changes occurring at +the same moment in time. In the following, the term "event" refers to a single +input event encompassing a type, code, and value. + +The input protocol is a stateful protocol. Events are emitted only when values +of event codes have changed. However, the state is maintained within the Linux +input subsystem; drivers do not need to maintain the state and may attempt to +emit unchanged values without harm. Userspace may obtain the current state of +event code values using the EVIOCG* ioctls defined in linux/input.h. The event +reports supported by a device are also provided by sysfs in +class/input/event*/device/capabilities/, and the properties of a device are +provided in class/input/event*/device/properties. + +Types: +========== +Types are groupings of codes under a logical input construct. Each type has a +set of applicable codes to be used in generating events. See the Codes section +for details on valid codes for each type. + +* EV_SYN: + - Used as markers to separate events. Events may be separated in time or in + space, such as with the multitouch protocol. + +* EV_KEY: + - Used to describe state changes of keyboards, buttons, or other key-like + devices. + +* EV_REL: + - Used to describe relative axis value changes, e.g. moving the mouse 5 units + to the left. + +* EV_ABS: + - Used to describe absolute axis value changes, e.g. describing the + coordinates of a touch on a touchscreen. + +* EV_MSC: + - Used to describe miscellaneous input data that do not fit into other types. + +* EV_SW: + - Used to describe binary state input switches. + +* EV_LED: + - Used to turn LEDs on devices on and off. + +* EV_SND: + - Used to output sound to devices. + +* EV_REP: + - Used for autorepeating devices. + +* EV_FF: + - Used to send force feedback commands to an input device. + +* EV_PWR: + - A special type for power button and switch input. + +* EV_FF_STATUS: + - Used to receive force feedback device status. + +Codes: +========== +Codes define the precise type of event. + +EV_SYN: +---------- +EV_SYN event values are undefined. Their usage is defined only by when they are +sent in the evdev event stream. + +* SYN_REPORT: + - Used to synchronize and separate events into packets of input data changes + occurring at the same moment in time. For example, motion of a mouse may set + the REL_X and REL_Y values for one motion, then emit a SYN_REPORT. The next + motion will emit more REL_X and REL_Y values and send another SYN_REPORT. + +* SYN_CONFIG: + - TBD + +* SYN_MT_REPORT: + - Used to synchronize and separate touch events. See the + multi-touch-protocol.txt document for more information. + +* SYN_DROPPED: + - Used to indicate buffer overrun in the evdev client's event queue. + Client should ignore all events up to and including next SYN_REPORT + event and query the device (using EVIOCG* ioctls) to obtain its + current state. + +EV_KEY: +---------- +EV_KEY events take the form KEY_<name> or BTN_<name>. For example, KEY_A is used +to represent the 'A' key on a keyboard. When a key is depressed, an event with +the key's code is emitted with value 1. When the key is released, an event is +emitted with value 0. Some hardware send events when a key is repeated. These +events have a value of 2. In general, KEY_<name> is used for keyboard keys, and +BTN_<name> is used for other types of momentary switch events. + +A few EV_KEY codes have special meanings: + +* BTN_TOOL_<name>: + - These codes are used in conjunction with input trackpads, tablets, and + touchscreens. These devices may be used with fingers, pens, or other tools. + When an event occurs and a tool is used, the corresponding BTN_TOOL_<name> + code should be set to a value of 1. When the tool is no longer interacting + with the input device, the BTN_TOOL_<name> code should be reset to 0. All + trackpads, tablets, and touchscreens should use at least one BTN_TOOL_<name> + code when events are generated. + +* BTN_TOUCH: + BTN_TOUCH is used for touch contact. While an input tool is determined to be + within meaningful physical contact, the value of this property must be set + to 1. Meaningful physical contact may mean any contact, or it may mean + contact conditioned by an implementation defined property. For example, a + touchpad may set the value to 1 only when the touch pressure rises above a + certain value. BTN_TOUCH may be combined with BTN_TOOL_<name> codes. For + example, a pen tablet may set BTN_TOOL_PEN to 1 and BTN_TOUCH to 0 while the + pen is hovering over but not touching the tablet surface. + +Note: For appropriate function of the legacy mousedev emulation driver, +BTN_TOUCH must be the first evdev code emitted in a synchronization frame. + +Note: Historically a touch device with BTN_TOOL_FINGER and BTN_TOUCH was +interpreted as a touchpad by userspace, while a similar device without +BTN_TOOL_FINGER was interpreted as a touchscreen. For backwards compatibility +with current userspace it is recommended to follow this distinction. In the +future, this distinction will be deprecated and the device properties ioctl +EVIOCGPROP, defined in linux/input.h, will be used to convey the device type. + +* BTN_TOOL_FINGER, BTN_TOOL_DOUBLETAP, BTN_TOOL_TRIPLETAP, BTN_TOOL_QUADTAP: + - These codes denote one, two, three, and four finger interaction on a + trackpad or touchscreen. For example, if the user uses two fingers and moves + them on the touchpad in an effort to scroll content on screen, + BTN_TOOL_DOUBLETAP should be set to value 1 for the duration of the motion. + Note that all BTN_TOOL_<name> codes and the BTN_TOUCH code are orthogonal in + purpose. A trackpad event generated by finger touches should generate events + for one code from each group. At most only one of these BTN_TOOL_<name> + codes should have a value of 1 during any synchronization frame. + +Note: Historically some drivers emitted multiple of the finger count codes with +a value of 1 in the same synchronization frame. This usage is deprecated. + +Note: In multitouch drivers, the input_mt_report_finger_count() function should +be used to emit these codes. Please see multi-touch-protocol.txt for details. + +EV_REL: +---------- +EV_REL events describe relative changes in a property. For example, a mouse may +move to the left by a certain number of units, but its absolute position in +space is unknown. If the absolute position is known, EV_ABS codes should be used +instead of EV_REL codes. + +A few EV_REL codes have special meanings: + +* REL_WHEEL, REL_HWHEEL: + - These codes are used for vertical and horizontal scroll wheels, + respectively. + +EV_ABS: +---------- +EV_ABS events describe absolute changes in a property. For example, a touchpad +may emit coordinates for a touch location. + +A few EV_ABS codes have special meanings: + +* ABS_DISTANCE: + - Used to describe the distance of a tool from an interaction surface. This + event should only be emitted while the tool is hovering, meaning in close + proximity of the device and while the value of the BTN_TOUCH code is 0. If + the input device may be used freely in three dimensions, consider ABS_Z + instead. + +* ABS_MT_<name>: + - Used to describe multitouch input events. Please see + multi-touch-protocol.txt for details. + +EV_SW: +---------- +EV_SW events describe stateful binary switches. For example, the SW_LID code is +used to denote when a laptop lid is closed. + +Upon binding to a device or resuming from suspend, a driver must report +the current switch state. This ensures that the device, kernel, and userspace +state is in sync. + +Upon resume, if the switch state is the same as before suspend, then the input +subsystem will filter out the duplicate switch state reports. The driver does +not need to keep the state of the switch at any time. + +EV_MSC: +---------- +EV_MSC events are used for input and output events that do not fall under other +categories. + +EV_LED: +---------- +EV_LED events are used for input and output to set and query the state of +various LEDs on devices. + +EV_REP: +---------- +EV_REP events are used for specifying autorepeating events. + +EV_SND: +---------- +EV_SND events are used for sending sound commands to simple sound output +devices. + +EV_FF: +---------- +EV_FF events are used to initialize a force feedback capable device and to cause +such device to feedback. + +EV_PWR: +---------- +EV_PWR events are a special type of event used specifically for power +mangement. Its usage is not well defined. To be addressed later. + +Guidelines: +========== +The guidelines below ensure proper single-touch and multi-finger functionality. +For multi-touch functionality, see the multi-touch-protocol.txt document for +more information. + +Mice: +---------- +REL_{X,Y} must be reported when the mouse moves. BTN_LEFT must be used to report +the primary button press. BTN_{MIDDLE,RIGHT,4,5,etc.} should be used to report +further buttons of the device. REL_WHEEL and REL_HWHEEL should be used to report +scroll wheel events where available. + +Touchscreens: +---------- +ABS_{X,Y} must be reported with the location of the touch. BTN_TOUCH must be +used to report when a touch is active on the screen. +BTN_{MOUSE,LEFT,MIDDLE,RIGHT} must not be reported as the result of touch +contact. BTN_TOOL_<name> events should be reported where possible. + +Trackpads: +---------- +Legacy trackpads that only provide relative position information must report +events like mice described above. + +Trackpads that provide absolute touch position must report ABS_{X,Y} for the +location of the touch. BTN_TOUCH should be used to report when a touch is active +on the trackpad. Where multi-finger support is available, BTN_TOOL_<name> should +be used to report the number of touches active on the trackpad. + +Tablets: +---------- +BTN_TOOL_<name> events must be reported when a stylus or other tool is active on +the tablet. ABS_{X,Y} must be reported with the location of the tool. BTN_TOUCH +should be used to report when the tool is in contact with the tablet. +BTN_{STYLUS,STYLUS2} should be used to report buttons on the tool itself. Any +button may be used for buttons on the tablet except BTN_{MOUSE,LEFT}. +BTN_{0,1,2,etc} are good generic codes for unlabeled buttons. Do not use +meaningful buttons, like BTN_FORWARD, unless the button is labeled for that +purpose on the device. diff --git a/Documentation/input/joystick-parport.txt b/Documentation/input/joystick-parport.txt index 1c856f32ff2c..56870c70a796 100644 --- a/Documentation/input/joystick-parport.txt +++ b/Documentation/input/joystick-parport.txt @@ -272,7 +272,7 @@ if you want to use gamecon.c. Also, the connection is a bit more complex. You'll need a bunch of diodes, and one pullup resistor. First, you connect the Directions and the button -the same as for db9, however with the diodes inbetween. +the same as for db9, however with the diodes between. Diodes (pin 2) -----|<|----> Up diff --git a/Documentation/input/rotary-encoder.txt b/Documentation/input/rotary-encoder.txt index 8b4129de1d2d..943e8f6f2b15 100644 --- a/Documentation/input/rotary-encoder.txt +++ b/Documentation/input/rotary-encoder.txt @@ -46,7 +46,7 @@ c) Falling edge on channel A, channel B in high state d) Falling edge on channel B, channel A in low state Parking position. If the encoder enters this state, a full transition - should have happend, unless it flipped back on half the way. The + should have happened, unless it flipped back on half the way. The 'armed' state tells us about that. 2. Platform requirements diff --git a/Documentation/input/walkera0701.txt b/Documentation/input/walkera0701.txt index 8f4289efc5c4..561385d38482 100644 --- a/Documentation/input/walkera0701.txt +++ b/Documentation/input/walkera0701.txt @@ -77,7 +77,7 @@ pulse length: 24 bin+oct values + 1 bin value = 24*4+1 bits = 97 bits -(Warning, pulses on ACK ar inverted by transistor, irq is rised up on sync +(Warning, pulses on ACK are inverted by transistor, irq is raised up on sync to bin change or octal value to bin change). Binary data representations: diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt index e68543f767d5..a0a5d82b6b0b 100644 --- a/Documentation/ioctl/ioctl-number.txt +++ b/Documentation/ioctl/ioctl-number.txt @@ -273,6 +273,7 @@ Code Seq#(hex) Include File Comments 'z' 40-7F CAN bus card conflict! <mailto:oe@port.de> 'z' 10-4F drivers/s390/crypto/zcrypt_api.h conflict! +'|' 00-7F linux/media.h 0x80 00-1F linux/fb.h 0x89 00-06 arch/x86/include/asm/sockios.h 0x89 0B-DF linux/sockios.h diff --git a/Documentation/iostats.txt b/Documentation/iostats.txt index f6dece5b7014..c76c21d87e85 100644 --- a/Documentation/iostats.txt +++ b/Documentation/iostats.txt @@ -1,8 +1,6 @@ I/O statistics fields --------------- -Last modified Sep 30, 2003 - Since 2.4.20 (and some versions before, with patches), and 2.5.45, more extensive disk statistics have been introduced to help measure disk activity. Tools such as sar and iostat typically interpret these and do @@ -46,11 +44,12 @@ the above example, the first field of statistics would be 446216. By contrast, in 2.6 if you look at /sys/block/hda/stat, you'll find just the eleven fields, beginning with 446216. If you look at /proc/diskstats, the eleven fields will be preceded by the major and -minor device numbers, and device name. Each of these formats provide +minor device numbers, and device name. Each of these formats provides eleven fields of statistics, each meaning exactly the same things. All fields except field 9 are cumulative since boot. Field 9 should -go to zero as I/Os complete; all others only increase. Yes, these are -32 bit unsigned numbers, and on a very busy or long-lived system they +go to zero as I/Os complete; all others only increase (unless they +overflow and wrap). Yes, these are (32-bit or 64-bit) unsigned long +(native word size) numbers, and on a very busy or long-lived system they may wrap. Applications should be prepared to deal with that; unless your observations are measured in large numbers of minutes or hours, they should not wrap twice before you notice them. @@ -96,11 +95,11 @@ introduced when changes collide, so (for instance) adding up all the read I/Os issued per partition should equal those made to the disks ... but due to the lack of locking it may only be very close. -In 2.6, there are counters for each cpu, which made the lack of locking -almost a non-issue. When the statistics are read, the per-cpu counters -are summed (possibly overflowing the unsigned 32-bit variable they are +In 2.6, there are counters for each CPU, which make the lack of locking +almost a non-issue. When the statistics are read, the per-CPU counters +are summed (possibly overflowing the unsigned long variable they are summed to) and the result given to the user. There is no convenient -user interface for accessing the per-cpu counters themselves. +user interface for accessing the per-CPU counters themselves. Disks vs Partitions ------------------- diff --git a/Documentation/irqflags-tracing.txt b/Documentation/irqflags-tracing.txt index 6a444877ee0b..67aa71e73035 100644 --- a/Documentation/irqflags-tracing.txt +++ b/Documentation/irqflags-tracing.txt @@ -53,5 +53,5 @@ implementation in an architecture: lockdep will detect that and will turn itself off. I.e. the lock validator will still be reliable. There should be no crashes due to irq-tracing bugs. (except if the assembly changes break other code by modifying conditions or registers that -shouldnt be) +shouldn't be) diff --git a/Documentation/isdn/INTERFACE.CAPI b/Documentation/isdn/INTERFACE.CAPI index 309eb5ed942b..1688b5a1fd77 100644 --- a/Documentation/isdn/INTERFACE.CAPI +++ b/Documentation/isdn/INTERFACE.CAPI @@ -240,7 +240,7 @@ Functions capi_cmsg2message() and capi_message2cmsg() are provided to convert messages between their transport encoding described in the CAPI 2.0 standard and their _cmsg structure representation. Note that capi_cmsg2message() does not know or check the size of its destination buffer. The caller must make -sure it is big enough to accomodate the resulting CAPI message. +sure it is big enough to accommodate the resulting CAPI message. 5. Lower Layer Interface Functions diff --git a/Documentation/kbuild/kbuild.txt b/Documentation/kbuild/kbuild.txt index 8f63b224ab09..7c2a89ba674c 100644 --- a/Documentation/kbuild/kbuild.txt +++ b/Documentation/kbuild/kbuild.txt @@ -26,11 +26,11 @@ Additional options to the assembler (for built-in and modules). AFLAGS_MODULE -------------------------------------------------- -Addtional module specific options to use for $(AS). +Additional module specific options to use for $(AS). AFLAGS_KERNEL -------------------------------------------------- -Addtional options for $(AS) when used for assembler +Additional options for $(AS) when used for assembler code for code that is compiled as built-in. KCFLAGS @@ -39,12 +39,12 @@ Additional options to the C compiler (for built-in and modules). CFLAGS_KERNEL -------------------------------------------------- -Addtional options for $(CC) when used to compile +Additional options for $(CC) when used to compile code that is compiled as built-in. CFLAGS_MODULE -------------------------------------------------- -Addtional module specific options to use for $(CC). +Additional module specific options to use for $(CC). LDFLAGS_MODULE -------------------------------------------------- @@ -196,3 +196,8 @@ to be included in the databases, separated by blank space. E.g.: To get all available archs you can also specify all. E.g.: $ make ALLSOURCE_ARCHS=all tags + +KBUILD_ENABLE_EXTRA_GCC_CHECKS +-------------------------------------------------- +If enabled over the make command line with "W=1", it turns on additional +gcc -W... options for more extensive build-time checking. diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index d18a9e12152a..cc85a9278190 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -699,7 +699,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. ekgdboc= [X86,KGDB] Allow early kernel console debugging ekgdboc=kbd - This is desgined to be used in conjunction with + This is designed to be used in conjunction with the boot argument: earlyprintk=vga edd= [EDD] @@ -872,6 +872,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted. If specified, z/VM IUCV HVC accepts connections from listed z/VM user IDs only. + keep_bootcon [KNL] + Do not unregister boot console at start. This is only + useful for debugging when something happens in the window + between unregistering the boot console and initializing + the real console. + i2c_bus= [HW] Override the default board specific I2C bus speed or register an additional I2C bus that is not registered from board initialization code. @@ -1597,11 +1603,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted. Format: [state][,regs][,debounce][,die] nmi_watchdog= [KNL,BUGS=X86] Debugging features for SMP kernels - Format: [panic,][num] + Format: [panic,][nopanic,][num] Valid num: 0 0 - turn nmi_watchdog off When panic is specified, panic when an NMI watchdog - timeout occurs. + timeout occurs (or 'nopanic' to override the opposite + default). This is useful when you use a panic=... timeout and need the box quickly up again. @@ -1825,10 +1832,17 @@ bytes respectively. Such letter suffixes can also be entirely omitted. perfmon on Intel CPUs instead of the CPU specific event set. + oops=panic Always panic on oopses. Default is to just kill the + process, but there is a small probability of + deadlocking the machine. + This will also cause panics on machine check exceptions. + Useful together with panic=30 to trigger a reboot. + OSS [HW,OSS] See Documentation/sound/oss/oss-parameters.txt - panic= [KNL] Kernel behaviour on panic + panic= [KNL] Kernel behaviour on panic: delay <timeout> + seconds before rebooting Format: <timeout> parkbd.port= [HW] Parallel port number the keyboard adapter is @@ -2331,6 +2345,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. softlockup_panic= [KNL] Should the soft-lockup detector generate panics. + Format: <integer> sonypi.*= [HW] Sony Programmable I/O Control Device driver See Documentation/sonypi.txt @@ -2463,8 +2478,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted. topology= [S390] Format: {off | on} Specify if the kernel should make use of the cpu - topology informations if the hardware supports these. - The scheduler will make use of these informations and + topology information if the hardware supports this. + The scheduler will make use of this information and e.g. base its process migration decisions on it. Default is on. @@ -2517,8 +2532,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. reported either. unknown_nmi_panic - [X86] - Set unknown_nmi_panic=1 early on boot. + [X86] Cause panic on unknown NMI. usbcore.autosuspend= [USB] The autosuspend time delay (in seconds) used diff --git a/Documentation/kmemleak.txt b/Documentation/kmemleak.txt index 34f6638aa5ac..090e6ee04536 100644 --- a/Documentation/kmemleak.txt +++ b/Documentation/kmemleak.txt @@ -11,6 +11,7 @@ with the difference that the orphan objects are not freed but only reported via /sys/kernel/debug/kmemleak. A similar method is used by the Valgrind tool (memcheck --leak-check) to detect the memory leaks in user-space applications. +Kmemleak is supported on x86, arm, powerpc, sparc, sh, microblaze and tile. Usage ----- @@ -178,5 +179,4 @@ block doesn't need to be freed (some cases in the init_call functions), the pointer is calculated by other methods than the usual container_of macro or the pointer is stored in a location not scanned by kmemleak. -Page allocations and ioremap are not tracked. Only the ARM and x86 -architectures are currently supported. +Page allocations and ioremap are not tracked. diff --git a/Documentation/kvm/mmu.txt b/Documentation/kvm/mmu.txt index 142cc5136650..f46aa58389ca 100644 --- a/Documentation/kvm/mmu.txt +++ b/Documentation/kvm/mmu.txt @@ -23,7 +23,7 @@ The mmu code attempts to satisfy the following requirements: and framebuffer-based displays - footprint: keep the amount of pinned kernel memory low (most memory should be shrinkable) -- reliablity: avoid multipage or GFP_ATOMIC allocations +- reliability: avoid multipage or GFP_ATOMIC allocations Acronyms ======== diff --git a/Documentation/kvm/ppc-pv.txt b/Documentation/kvm/ppc-pv.txt index a7f2244b3be9..3ab969c59046 100644 --- a/Documentation/kvm/ppc-pv.txt +++ b/Documentation/kvm/ppc-pv.txt @@ -136,7 +136,7 @@ Patched instructions ==================== The "ld" and "std" instructions are transormed to "lwz" and "stw" instructions -respectively on 32 bit systems with an added offset of 4 to accomodate for big +respectively on 32 bit systems with an added offset of 4 to accommodate for big endianness. The following is a list of mapping the Linux kernel performs when running as diff --git a/Documentation/kvm/timekeeping.txt b/Documentation/kvm/timekeeping.txt index 0c5033a58c9e..df8946377cb6 100644 --- a/Documentation/kvm/timekeeping.txt +++ b/Documentation/kvm/timekeeping.txt @@ -81,7 +81,7 @@ Mode 0: Single Timeout. This is a one-shot software timeout that counts down when the gate is high (always true for timers 0 and 1). When the count reaches zero, the output goes high. -Mode 1: Triggered One-shot. The output is intially set high. When the gate +Mode 1: Triggered One-shot. The output is initially set high. When the gate line is set high, a countdown is initiated (which does not stop if the gate is lowered), during which the output is set low. When the count reaches zero, the output goes high. diff --git a/Documentation/laptops/asus-laptop.txt b/Documentation/laptops/asus-laptop.txt index c1c5be84e4b1..803e51f6768b 100644 --- a/Documentation/laptops/asus-laptop.txt +++ b/Documentation/laptops/asus-laptop.txt @@ -61,7 +61,7 @@ Usage Hotkeys are also reported as input keys (like keyboards) you can check which key are supported using "xev" under X11. - You can get informations on the version of your DSDT table by reading the + You can get information on the version of your DSDT table by reading the /sys/devices/platform/asus-laptop/infos entry. If you have a question or a bug report to do, please include the output of this entry. @@ -178,7 +178,7 @@ LED display ----------- Some models like the W1N have a LED display that can be used to display - several informations. + several items of information. LED display works for the following models: W1000N diff --git a/Documentation/hwmon/hpfall.c b/Documentation/laptops/hpfall.c index a4a8fc5d05d4..a4a8fc5d05d4 100644 --- a/Documentation/hwmon/hpfall.c +++ b/Documentation/laptops/hpfall.c diff --git a/Documentation/laptops/sony-laptop.txt b/Documentation/laptops/sony-laptop.txt index 23ce7d350d1a..2bd4e82e5d9f 100644 --- a/Documentation/laptops/sony-laptop.txt +++ b/Documentation/laptops/sony-laptop.txt @@ -14,7 +14,8 @@ Some models report hotkeys through the SNC or SPIC devices, such events are reported both through the ACPI subsystem as acpi events and through the INPUT subsystem. See the logs of acpid or /proc/acpi/event and /proc/bus/input/devices to find out what those events are and which input -devices are created by the driver. +devices are created by the driver. Additionally, loading the driver with the +debug option will report all events in the kernel log. Backlight control: ------------------ @@ -64,6 +65,16 @@ powers off the sound card, # echo "1" > /sys/devices/platform/sony-laptop/audiopower powers on the sound card. + +RFkill control: +--------------- +More recent Vaio models expose a consistent set of ACPI methods to +control radio frequency emitting devices. If you are a lucky owner of +such a laptop you will find the necessary rfkill devices under +/sys/class/rfkill. Check those starting with sony-* in + # grep . /sys/class/rfkill/*/{state,name} + + Development: ------------ @@ -75,8 +86,21 @@ pass the option 'debug=1'. REPEAT: DON'T DO THIS IF YOU DON'T LIKE RISKY BUSINESS. In your kernel logs you will find the list of all ACPI methods -the SNC device has on your laptop. You can see the GCDP/GCDP methods -used to pwer on/off the CD drive, but there are others. +the SNC device has on your laptop. + +* For new models you will see a long list of meaningless method names, +reading the DSDT table source should reveal that: +(1) the SNC device uses an internal capability lookup table +(2) SN00 is used to find values in the lookup table +(3) SN06 and SN07 are used to call into the real methods based on + offsets you can obtain iterating the table using SN00 +(4) SN02 used to enable events. +Some values in the capability lookup table are more or less known, see +the code for all sony_call_snc_handle calls, others are more obscure. + +* For old models you can see the GCDP/GCDP methods used to pwer on/off +the CD drive, but there are others and they are usually different from +model to model. I HAVE NO IDEA WHAT THOSE METHODS DO. @@ -108,9 +132,8 @@ Bugs/Limitations: laptop, including permanent damage. * The sony-laptop and sonypi drivers do not interact at all. In the - future, sonypi could use sony-laptop to do (part of) its business. + future, sonypi will be removed and replaced by sony-laptop. * spicctrl, which is the userspace tool used to communicate with the - sonypi driver (through /dev/sonypi) does not try to use the - sony-laptop driver. In the future, spicctrl could try sonypi first, - and if it isn't present, try sony-laptop instead. + sonypi driver (through /dev/sonypi) is deprecated as well since all + its features are now available under the sysfs tree via sony-laptop. diff --git a/Documentation/leds/00-INDEX b/Documentation/leds/00-INDEX new file mode 100644 index 000000000000..29f481df32c7 --- /dev/null +++ b/Documentation/leds/00-INDEX @@ -0,0 +1,8 @@ +leds-class.txt + - documents LED handling under Linux. +leds-lp3944.txt + - notes on how to use the leds-lp3944 driver. +leds-lp5521.txt + - notes on how to use the leds-lp5521 driver. +leds-lp5523.txt + - notes on how to use the leds-lp5523 driver. diff --git a/Documentation/leds-class.txt b/Documentation/leds/leds-class.txt index 58b266bd1846..4996586e27e8 100644 --- a/Documentation/leds-class.txt +++ b/Documentation/leds/leds-class.txt @@ -95,4 +95,3 @@ There are a number of cases where a trigger might only be mappable to a particular LED (ACPI?). The addition of triggers provided by the LED driver should cover this option and be possible to add without breaking the current interface. - diff --git a/Documentation/leds-lp3944.txt b/Documentation/leds/leds-lp3944.txt index c6eda18b15ef..c6eda18b15ef 100644 --- a/Documentation/leds-lp3944.txt +++ b/Documentation/leds/leds-lp3944.txt diff --git a/Documentation/md.txt b/Documentation/md.txt index a81c7b4790f2..2366b1c8cf19 100644 --- a/Documentation/md.txt +++ b/Documentation/md.txt @@ -552,6 +552,16 @@ also have within the array where IO will be blocked. This is currently only supported for raid4/5/6. + sync_min + sync_max + The two values, given as numbers of sectors, indicate a range + withing the array where 'check'/'repair' will operate. Must be + a multiple of chunk_size. When it reaches "sync_max" it will + pause, rather than complete. + You can use 'select' or 'poll' on "sync_completed" to wait for + that number to reach sync_max. Then you can either increase + "sync_max", or can write 'idle' to "sync_action". + Each active md device may also have attributes specific to the personality module that manages it. diff --git a/Documentation/media-framework.txt b/Documentation/media-framework.txt new file mode 100644 index 000000000000..76a2087db205 --- /dev/null +++ b/Documentation/media-framework.txt @@ -0,0 +1,353 @@ +Linux kernel media framework +============================ + +This document describes the Linux kernel media framework, its data structures, +functions and their usage. + + +Introduction +------------ + +The media controller API is documented in DocBook format in +Documentation/DocBook/v4l/media-controller.xml. This document will focus on +the kernel-side implementation of the media framework. + + +Abstract media device model +--------------------------- + +Discovering a device internal topology, and configuring it at runtime, is one +of the goals of the media framework. To achieve this, hardware devices are +modeled as an oriented graph of building blocks called entities connected +through pads. + +An entity is a basic media hardware building block. It can correspond to +a large variety of logical blocks such as physical hardware devices +(CMOS sensor for instance), logical hardware devices (a building block +in a System-on-Chip image processing pipeline), DMA channels or physical +connectors. + +A pad is a connection endpoint through which an entity can interact with +other entities. Data (not restricted to video) produced by an entity +flows from the entity's output to one or more entity inputs. Pads should +not be confused with physical pins at chip boundaries. + +A link is a point-to-point oriented connection between two pads, either +on the same entity or on different entities. Data flows from a source +pad to a sink pad. + + +Media device +------------ + +A media device is represented by a struct media_device instance, defined in +include/media/media-device.h. Allocation of the structure is handled by the +media device driver, usually by embedding the media_device instance in a +larger driver-specific structure. + +Drivers register media device instances by calling + + media_device_register(struct media_device *mdev); + +The caller is responsible for initializing the media_device structure before +registration. The following fields must be set: + + - dev must point to the parent device (usually a pci_dev, usb_interface or + platform_device instance). + + - model must be filled with the device model name as a NUL-terminated UTF-8 + string. The device/model revision must not be stored in this field. + +The following fields are optional: + + - serial is a unique serial number stored as a NUL-terminated ASCII string. + The field is big enough to store a GUID in text form. If the hardware + doesn't provide a unique serial number this field must be left empty. + + - bus_info represents the location of the device in the system as a + NUL-terminated ASCII string. For PCI/PCIe devices bus_info must be set to + "PCI:" (or "PCIe:") followed by the value of pci_name(). For USB devices, + the usb_make_path() function must be used. This field is used by + applications to distinguish between otherwise identical devices that don't + provide a serial number. + + - hw_revision is the hardware device revision in a driver-specific format. + When possible the revision should be formatted with the KERNEL_VERSION + macro. + + - driver_version is formatted with the KERNEL_VERSION macro. The version + minor must be incremented when new features are added to the userspace API + without breaking binary compatibility. The version major must be + incremented when binary compatibility is broken. + +Upon successful registration a character device named media[0-9]+ is created. +The device major and minor numbers are dynamic. The model name is exported as +a sysfs attribute. + +Drivers unregister media device instances by calling + + media_device_unregister(struct media_device *mdev); + +Unregistering a media device that hasn't been registered is *NOT* safe. + + +Entities, pads and links +------------------------ + +- Entities + +Entities are represented by a struct media_entity instance, defined in +include/media/media-entity.h. The structure is usually embedded into a +higher-level structure, such as a v4l2_subdev or video_device instance, +although drivers can allocate entities directly. + +Drivers initialize entities by calling + + media_entity_init(struct media_entity *entity, u16 num_pads, + struct media_pad *pads, u16 extra_links); + +The media_entity name, type, flags, revision and group_id fields can be +initialized before or after calling media_entity_init. Entities embedded in +higher-level standard structures can have some of those fields set by the +higher-level framework. + +As the number of pads is known in advance, the pads array is not allocated +dynamically but is managed by the entity driver. Most drivers will embed the +pads array in a driver-specific structure, avoiding dynamic allocation. + +Drivers must set the direction of every pad in the pads array before calling +media_entity_init. The function will initialize the other pads fields. + +Unlike the number of pads, the total number of links isn't always known in +advance by the entity driver. As an initial estimate, media_entity_init +pre-allocates a number of links equal to the number of pads plus an optional +number of extra links. The links array will be reallocated if it grows beyond +the initial estimate. + +Drivers register entities with a media device by calling + + media_device_register_entity(struct media_device *mdev, + struct media_entity *entity); + +Entities are identified by a unique positive integer ID. Drivers can provide an +ID by filling the media_entity id field prior to registration, or request the +media controller framework to assign an ID automatically. Drivers that provide +IDs manually must ensure that all IDs are unique. IDs are not guaranteed to be +contiguous even when they are all assigned automatically by the framework. + +Drivers unregister entities by calling + + media_device_unregister_entity(struct media_entity *entity); + +Unregistering an entity will not change the IDs of the other entities, and the +ID will never be reused for a newly registered entity. + +When a media device is unregistered, all its entities are unregistered +automatically. No manual entities unregistration is then required. + +Drivers free resources associated with an entity by calling + + media_entity_cleanup(struct media_entity *entity); + +This function must be called during the cleanup phase after unregistering the +entity. Note that the media_entity instance itself must be freed explicitly by +the driver if required. + +Entities have flags that describe the entity capabilities and state. + + MEDIA_ENT_FL_DEFAULT indicates the default entity for a given type. + This can be used to report the default audio and video devices or the + default camera sensor. + +Logical entity groups can be defined by setting the group ID of all member +entities to the same non-zero value. An entity group serves no purpose in the +kernel, but is reported to userspace during entities enumeration. The group_id +field belongs to the media device driver and must not by touched by entity +drivers. + +Media device drivers should define groups if several entities are logically +bound together. Example usages include reporting + + - ALSA, VBI and video nodes that carry the same media stream + - lens and flash controllers associated with a sensor + +- Pads + +Pads are represented by a struct media_pad instance, defined in +include/media/media-entity.h. Each entity stores its pads in a pads array +managed by the entity driver. Drivers usually embed the array in a +driver-specific structure. + +Pads are identified by their entity and their 0-based index in the pads array. +Both information are stored in the media_pad structure, making the media_pad +pointer the canonical way to store and pass link references. + +Pads have flags that describe the pad capabilities and state. + + MEDIA_PAD_FL_SINK indicates that the pad supports sinking data. + MEDIA_PAD_FL_SOURCE indicates that the pad supports sourcing data. + +One and only one of MEDIA_PAD_FL_SINK and MEDIA_PAD_FL_SOURCE must be set for +each pad. + +- Links + +Links are represented by a struct media_link instance, defined in +include/media/media-entity.h. Each entity stores all links originating at or +targeting any of its pads in a links array. A given link is thus stored +twice, once in the source entity and once in the target entity. The array is +pre-allocated and grows dynamically as needed. + +Drivers create links by calling + + media_entity_create_link(struct media_entity *source, u16 source_pad, + struct media_entity *sink, u16 sink_pad, + u32 flags); + +An entry in the link array of each entity is allocated and stores pointers +to source and sink pads. + +Links have flags that describe the link capabilities and state. + + MEDIA_LNK_FL_ENABLED indicates that the link is enabled and can be used + to transfer media data. When two or more links target a sink pad, only + one of them can be enabled at a time. + MEDIA_LNK_FL_IMMUTABLE indicates that the link enabled state can't be + modified at runtime. If MEDIA_LNK_FL_IMMUTABLE is set, then + MEDIA_LNK_FL_ENABLED must also be set since an immutable link is always + enabled. + + +Graph traversal +--------------- + +The media framework provides APIs to iterate over entities in a graph. + +To iterate over all entities belonging to a media device, drivers can use the +media_device_for_each_entity macro, defined in include/media/media-device.h. + + struct media_entity *entity; + + media_device_for_each_entity(entity, mdev) { + /* entity will point to each entity in turn */ + ... + } + +Drivers might also need to iterate over all entities in a graph that can be +reached only through enabled links starting at a given entity. The media +framework provides a depth-first graph traversal API for that purpose. + +Note that graphs with cycles (whether directed or undirected) are *NOT* +supported by the graph traversal API. To prevent infinite loops, the graph +traversal code limits the maximum depth to MEDIA_ENTITY_ENUM_MAX_DEPTH, +currently defined as 16. + +Drivers initiate a graph traversal by calling + + media_entity_graph_walk_start(struct media_entity_graph *graph, + struct media_entity *entity); + +The graph structure, provided by the caller, is initialized to start graph +traversal at the given entity. + +Drivers can then retrieve the next entity by calling + + media_entity_graph_walk_next(struct media_entity_graph *graph); + +When the graph traversal is complete the function will return NULL. + +Graph traversal can be interrupted at any moment. No cleanup function call is +required and the graph structure can be freed normally. + +Helper functions can be used to find a link between two given pads, or a pad +connected to another pad through an enabled link + + media_entity_find_link(struct media_pad *source, + struct media_pad *sink); + + media_entity_remote_source(struct media_pad *pad); + +Refer to the kerneldoc documentation for more information. + + +Use count and power handling +---------------------------- + +Due to the wide differences between drivers regarding power management needs, +the media controller does not implement power management. However, the +media_entity structure includes a use_count field that media drivers can use to +track the number of users of every entity for power management needs. + +The use_count field is owned by media drivers and must not be touched by entity +drivers. Access to the field must be protected by the media device graph_mutex +lock. + + +Links setup +----------- + +Link properties can be modified at runtime by calling + + media_entity_setup_link(struct media_link *link, u32 flags); + +The flags argument contains the requested new link flags. + +The only configurable property is the ENABLED link flag to enable/disable a +link. Links marked with the IMMUTABLE link flag can not be enabled or disabled. + +When a link is enabled or disabled, the media framework calls the +link_setup operation for the two entities at the source and sink of the link, +in that order. If the second link_setup call fails, another link_setup call is +made on the first entity to restore the original link flags. + +Media device drivers can be notified of link setup operations by setting the +media_device::link_notify pointer to a callback function. If provided, the +notification callback will be called before enabling and after disabling +links. + +Entity drivers must implement the link_setup operation if any of their links +is non-immutable. The operation must either configure the hardware or store +the configuration information to be applied later. + +Link configuration must not have any side effect on other links. If an enabled +link at a sink pad prevents another link at the same pad from being disabled, +the link_setup operation must return -EBUSY and can't implicitly disable the +first enabled link. + + +Pipelines and media streams +--------------------------- + +When starting streaming, drivers must notify all entities in the pipeline to +prevent link states from being modified during streaming by calling + + media_entity_pipeline_start(struct media_entity *entity, + struct media_pipeline *pipe); + +The function will mark all entities connected to the given entity through +enabled links, either directly or indirectly, as streaming. + +The media_pipeline instance pointed to by the pipe argument will be stored in +every entity in the pipeline. Drivers should embed the media_pipeline structure +in higher-level pipeline structures and can then access the pipeline through +the media_entity pipe field. + +Calls to media_entity_pipeline_start() can be nested. The pipeline pointer must +be identical for all nested calls to the function. + +When stopping the stream, drivers must notify the entities with + + media_entity_pipeline_stop(struct media_entity *entity); + +If multiple calls to media_entity_pipeline_start() have been made the same +number of media_entity_pipeline_stop() calls are required to stop streaming. The +media_entity pipe field is reset to NULL on the last nested stop call. + +Link configuration will fail with -EBUSY by default if either end of the link is +a streaming entity. Links that can be modified while streaming must be marked +with the MEDIA_LNK_FL_DYNAMIC flag. + +If other operations need to be disallowed on streaming entities (such as +changing entities configuration parameters) drivers can explicitly check the +media_entity stream_count field to find out if an entity is streaming. This +operation must be done with the media_device graph_mutex held. diff --git a/Documentation/mips/AU1xxx_IDE.README b/Documentation/mips/AU1xxx_IDE.README index 8ace35ebdcd5..cc887ecfd6eb 100644 --- a/Documentation/mips/AU1xxx_IDE.README +++ b/Documentation/mips/AU1xxx_IDE.README @@ -39,13 +39,13 @@ Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE Interface and Linux Device Driver" Application Note. -FILES, CONFIGS AND COMPATABILITY +FILES, CONFIGS AND COMPATIBILITY -------------------------------- Two files are introduced: a) 'arch/mips/include/asm/mach-au1x00/au1xxx_ide.h' - containes : struct _auide_hwif + contains : struct _auide_hwif timing parameters for PIO mode 0/1/2/3/4 timing parameters for MWDMA 0/1/2 diff --git a/Documentation/misc-devices/ics932s401 b/Documentation/misc-devices/ics932s401 index 07a739f406d8..bdac67ff6e3f 100644 --- a/Documentation/misc-devices/ics932s401 +++ b/Documentation/misc-devices/ics932s401 @@ -5,7 +5,7 @@ Supported chips: * IDT ICS932S401 Prefix: 'ics932s401' Addresses scanned: I2C 0x69 - Datasheet: Publically available at the IDT website + Datasheet: Publicly available at the IDT website Author: Darrick J. Wong diff --git a/Documentation/hwmon/lis3lv02d b/Documentation/misc-devices/lis3lv02d index 06534f25e643..f1a4ec840f86 100644 --- a/Documentation/hwmon/lis3lv02d +++ b/Documentation/misc-devices/lis3lv02d @@ -17,8 +17,8 @@ Description This driver provides support for the accelerometer found in various HP laptops sporting the feature officially called "HP Mobile Data Protection System 3D" or "HP 3D DriveGuard". It detects automatically laptops with this sensor. Known -models (full list can be found in drivers/hwmon/hp_accel.c) will have their -axis automatically oriented on standard way (eg: you can directly play +models (full list can be found in drivers/platform/x86/hp_accel.c) will have +their axis automatically oriented on standard way (eg: you can directly play neverball). The accelerometer data is readable via /sys/devices/platform/lis3lv02d. Reported values are scaled to mg values (1/1000th of earth gravity). diff --git a/Documentation/misc-devices/spear-pcie-gadget.txt b/Documentation/misc-devices/spear-pcie-gadget.txt new file mode 100644 index 000000000000..02c13ef5e908 --- /dev/null +++ b/Documentation/misc-devices/spear-pcie-gadget.txt @@ -0,0 +1,130 @@ +Spear PCIe Gadget Driver: + +Author +============= +Pratyush Anand (pratyush.anand@st.com) + +Location +============ +driver/misc/spear13xx_pcie_gadget.c + +Supported Chip: +=================== +SPEAr1300 +SPEAr1310 + +Menuconfig option: +========================== +Device Drivers + Misc devices + PCIe gadget support for SPEAr13XX platform +purpose +=========== +This driver has several nodes which can be read/written by configfs interface. +Its main purpose is to configure selected dual mode PCIe controller as device +and then program its various registers to configure it as a particular device +type. This driver can be used to show spear's PCIe device capability. + +Description of different nodes: +================================= + +read behavior of nodes: +------------------------------ +link :gives ltssm status. +int_type :type of supported interrupt +no_of_msi :zero if MSI is not enabled by host. A positive value is the + number of MSI vector granted. +vendor_id :returns programmed vendor id (hex) +device_id :returns programmed device id(hex) +bar0_size: :returns size of bar0 in hex. +bar0_address :returns address of bar0 mapped area in hex. +bar0_rw_offset :returns offset of bar0 for which bar0_data will return value. +bar0_data :returns data at bar0_rw_offset. + +write behavior of nodes: +------------------------------ +link :write UP to enable ltsmm DOWN to disable +int_type :write interrupt type to be configured and (int_type could be + INTA, MSI or NO_INT). Select MSI only when you have programmed + no_of_msi node. +no_of_msi :number of MSI vector needed. +inta :write 1 to assert INTA and 0 to de-assert. +send_msi :write MSI vector to be sent. +vendor_id :write vendor id(hex) to be programmed. +device_id :write device id(hex) to be programmed. +bar0_size :write size of bar0 in hex. default bar0 size is 1000 (hex) + bytes. +bar0_address :write address of bar0 mapped area in hex. (default mapping of + bar0 is SYSRAM1(E0800000). Always program bar size before bar + address. Kernel might modify bar size and address for alignment, so + read back bar size and address after writing to cross check. +bar0_rw_offset :write offset of bar0 for which bar0_data will write value. +bar0_data :write data to be written at bar0_rw_offset. + +Node programming example +=========================== +Program all PCIe registers in such a way that when this device is connected +to the PCIe host, then host sees this device as 1MB RAM. +#mount -t configfs none /Config +For nth PCIe Device Controller +# cd /config/pcie_gadget.n/ +Now you have all the nodes in this directory. +program vendor id as 0x104a +# echo 104A >> vendor_id + +program device id as 0xCD80 +# echo CD80 >> device_id + +program BAR0 size as 1MB +# echo 100000 >> bar0_size + +check for programmed bar0 size +# cat bar0_size + +Program BAR0 Address as DDR (0x2100000). This is the physical address of +memory, which is to be made visible to PCIe host. Similarly any other peripheral +can also be made visible to PCIe host. E.g., if you program base address of UART +as BAR0 address then when this device will be connected to a host, it will be +visible as UART. +# echo 2100000 >> bar0_address + +program interrupt type : INTA +# echo INTA >> int_type + +go for link up now. +# echo UP >> link + +It will have to be insured that, once link up is done on gadget, then only host +is initialized and start to search PCIe devices on its port. + +/*wait till link is up*/ +# cat link +wait till it returns UP. + +To assert INTA +# echo 1 >> inta + +To de-assert INTA +# echo 0 >> inta + +if MSI is to be used as interrupt, program no of msi vector needed (say4) +# echo 4 >> no_of_msi + +select MSI as interrupt type +# echo MSI >> int_type + +go for link up now +# echo UP >> link + +wait till link is up +# cat link +An application can repetitively read this node till link is found UP. It can +sleep between two read. + +wait till msi is enabled +# cat no_of_msi +Should return 4 (number of requested MSI vector) + +to send msi vector 2 +# echo 2 >> send_msi +#cd - diff --git a/Documentation/networking/3c359.txt b/Documentation/networking/3c359.txt index 4af8071a6d18..dadfe8147ab8 100644 --- a/Documentation/networking/3c359.txt +++ b/Documentation/networking/3c359.txt @@ -45,7 +45,7 @@ debugging messages on, that must be done by modified the source code. Variable MTU size: -The driver can handle a MTU size upto either 4500 or 18000 depending upon +The driver can handle a MTU size up to either 4500 or 18000 depending upon ring speed. The driver also changes the size of the receive buffers as part of the mtu re-sizing, so if you set mtu = 18000, you will need to be able to allocate 16 * (sk_buff with 18000 buffer size) call it 18500 bytes per ring diff --git a/Documentation/networking/README.ipw2200 b/Documentation/networking/README.ipw2200 index 616a8e540b0b..b7658bed4906 100644 --- a/Documentation/networking/README.ipw2200 +++ b/Documentation/networking/README.ipw2200 @@ -256,7 +256,7 @@ You can set the debug level via: Where $VALUE would be a number in the case of this sysfs entry. The input to sysfs files does not have to be a number. For example, the -firmware loader used by hotplug utilizes sysfs entries for transfering +firmware loader used by hotplug utilizes sysfs entries for transferring the firmware image from user space into the driver. The Intel(R) PRO/Wireless 2915ABG Driver for Linux exposes sysfs entries diff --git a/Documentation/networking/batman-adv.txt b/Documentation/networking/batman-adv.txt index 18afcd8afd51..ee496eb2f4a6 100644 --- a/Documentation/networking/batman-adv.txt +++ b/Documentation/networking/batman-adv.txt @@ -72,7 +72,7 @@ folder: # fragmentation gw_sel_class vis_mode -There is a special folder for debugging informations: +There is a special folder for debugging information: # ls /sys/kernel/debug/batman_adv/bat0/ # gateways socket transtable_global vis_data diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt index b36e741e94db..e27202bb8d75 100644 --- a/Documentation/networking/bonding.txt +++ b/Documentation/networking/bonding.txt @@ -368,7 +368,7 @@ fail_over_mac gratuitous ARP is lost, communication may be disrupted. - When this policy is used in conjuction with the mii + When this policy is used in conjunction with the mii monitor, devices which assert link up prior to being able to actually transmit and receive are particularly susceptible to loss of the gratuitous ARP, and an diff --git a/Documentation/networking/caif/Linux-CAIF.txt b/Documentation/networking/caif/Linux-CAIF.txt index 7fe7a9a33a4f..e52fd62bef3a 100644 --- a/Documentation/networking/caif/Linux-CAIF.txt +++ b/Documentation/networking/caif/Linux-CAIF.txt @@ -136,7 +136,7 @@ The CAIF Protocol implementation contains: - CFMUX CAIF Mux layer. Handles multiplexing between multiple physical bearers and multiple channels such as VEI, Datagram, etc. The MUX keeps track of the existing CAIF Channels and - Physical Instances and selects the apropriate instance based + Physical Instances and selects the appropriate instance based on Channel-Id and Physical-ID. - CFFRML CAIF Framing layer. Handles Framing i.e. Frame length diff --git a/Documentation/networking/caif/spi_porting.txt b/Documentation/networking/caif/spi_porting.txt index 0cb8cb9098f4..9efd0687dc4c 100644 --- a/Documentation/networking/caif/spi_porting.txt +++ b/Documentation/networking/caif/spi_porting.txt @@ -150,7 +150,7 @@ static int sspi_init_xfer(struct cfspi_xfer *xfer, struct cfspi_dev *dev) void sspi_sig_xfer(bool xfer, struct cfspi_dev *dev) { /* If xfer is true then you should assert the SPI_INT to indicate to - * the master that you are ready to recieve the data from the master + * the master that you are ready to receive the data from the master * SPI. If xfer is false then you should de-assert SPI_INT to indicate * that the transfer is done. */ diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt index 5b04b67ddca2..56ca3b75376e 100644 --- a/Documentation/networking/can.txt +++ b/Documentation/networking/can.txt @@ -240,7 +240,7 @@ solution for a couple of reasons: the user application using the common CAN filter mechanisms. Inside this filter definition the (interested) type of errors may be selected. The reception of error frames is disabled by default. - The format of the CAN error frame is briefly decribed in the Linux + The format of the CAN error frame is briefly described in the Linux header file "include/linux/can/error.h". 4. How to use Socket CAN diff --git a/Documentation/networking/ieee802154.txt b/Documentation/networking/ieee802154.txt index 23c995e64032..f41ea2405220 100644 --- a/Documentation/networking/ieee802154.txt +++ b/Documentation/networking/ieee802154.txt @@ -9,7 +9,7 @@ The Linux-ZigBee project goal is to provide complete implementation of IEEE 802.15.4 / ZigBee / 6LoWPAN protocols. IEEE 802.15.4 is a stack of protocols for organizing Low-Rate Wireless Personal Area Networks. -Currently only IEEE 802.15.4 layer is implemented. We have choosen +Currently only IEEE 802.15.4 layer is implemented. We have chosen to use plain Berkeley socket API, the generic Linux networking stack to transfer IEEE 802.15.4 messages and a special protocol over genetlink for configuration/management diff --git a/Documentation/networking/olympic.txt b/Documentation/networking/olympic.txt index c65a94010ea8..b95b5bf96751 100644 --- a/Documentation/networking/olympic.txt +++ b/Documentation/networking/olympic.txt @@ -65,7 +65,7 @@ together. Variable MTU size: -The driver can handle a MTU size upto either 4500 or 18000 depending upon +The driver can handle a MTU size up to either 4500 or 18000 depending upon ring speed. The driver also changes the size of the receive buffers as part of the mtu re-sizing, so if you set mtu = 18000, you will need to be able to allocate 16 * (sk_buff with 18000 buffer size) call it 18500 bytes per ring diff --git a/Documentation/networking/packet_mmap.txt b/Documentation/networking/packet_mmap.txt index 073894d1c093..4acea6603720 100644 --- a/Documentation/networking/packet_mmap.txt +++ b/Documentation/networking/packet_mmap.txt @@ -223,7 +223,7 @@ we will get the following buffer structure: A frame can be of any size with the only condition it can fit in a block. A block can only hold an integer number of frames, or in other words, a frame cannot -be spawned accross two blocks, so there are some details you have to take into +be spawned across two blocks, so there are some details you have to take into account when choosing the frame_size. See "Mapping and use of the circular buffer (ring)". diff --git a/Documentation/networking/s2io.txt b/Documentation/networking/s2io.txt index 9d4e0f4df5a8..4be0c039edbc 100644 --- a/Documentation/networking/s2io.txt +++ b/Documentation/networking/s2io.txt @@ -37,7 +37,7 @@ To associate an interface with a physical adapter use "ethtool -p <ethX>". The corresponding adapter's LED will blink multiple times. 3. Features supported: -a. Jumbo frames. Xframe I/II supports MTU upto 9600 bytes, +a. Jumbo frames. Xframe I/II supports MTU up to 9600 bytes, modifiable using ifconfig command. b. Offloads. Supports checksum offload(TCP/UDP/IP) on transmit @@ -49,7 +49,7 @@ significant performance improvement on certain platforms(SGI Altix, IBM xSeries). d. MSI/MSI-X. Can be enabled on platforms which support this feature -(IA64, Xeon) resulting in noticeable performance improvement(upto 7% +(IA64, Xeon) resulting in noticeable performance improvement(up to 7% on certain platforms). e. Statistics. Comprehensive MAC-level and software statistics displayed diff --git a/Documentation/networking/tc-actions-env-rules.txt b/Documentation/networking/tc-actions-env-rules.txt index dcadf6f88e34..70d6cf608251 100644 --- a/Documentation/networking/tc-actions-env-rules.txt +++ b/Documentation/networking/tc-actions-env-rules.txt @@ -1,5 +1,5 @@ -The "enviromental" rules for authors of any new tc actions are: +The "environmental" rules for authors of any new tc actions are: 1) If you stealeth or borroweth any packet thou shalt be branching from the righteous path and thou shalt cloneth. @@ -20,7 +20,7 @@ this way any action downstream can stomp on the packet. 3) Dropping packets you don't own is a no-no. You simply return TC_ACT_SHOT to the caller and they will drop it. -The "enviromental" rules for callers of actions (qdiscs etc) are: +The "environmental" rules for callers of actions (qdiscs etc) are: *) Thou art responsible for freeing anything returned as being TC_ACT_SHOT/STOLEN/QUEUED. If none of TC_ACT_SHOT/STOLEN/QUEUED is diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt index f023ba6bba62..1971bcf48a60 100644 --- a/Documentation/power/devices.txt +++ b/Documentation/power/devices.txt @@ -367,7 +367,7 @@ Drivers need to be able to handle hardware which has been reset since the suspend methods were called, for example by complete reinitialization. This may be the hardest part, and the one most protected by NDA'd documents and chip errata. It's simplest if the hardware state hasn't changed since -the suspend was carried out, but that can't be guaranteed (in fact, it ususally +the suspend was carried out, but that can't be guaranteed (in fact, it usually is not the case). Drivers must also be prepared to notice that the device has been removed diff --git a/Documentation/power/notifiers.txt b/Documentation/power/notifiers.txt index ae1b7ec07684..cf980709122a 100644 --- a/Documentation/power/notifiers.txt +++ b/Documentation/power/notifiers.txt @@ -24,7 +24,7 @@ PM_HIBERNATION_PREPARE The system is going to hibernate or suspend, tasks will be frozen immediately. PM_POST_HIBERNATION The system memory state has been restored from a - hibernation image or an error occured during the + hibernation image or an error occurred during the hibernation. Device drivers' .resume() callbacks have been executed and tasks have been thawed. @@ -38,7 +38,7 @@ PM_POST_RESTORE An error occurred during the hibernation restore. PM_SUSPEND_PREPARE The system is preparing for a suspend. -PM_POST_SUSPEND The system has just resumed or an error occured during +PM_POST_SUSPEND The system has just resumed or an error occurred during the suspend. Device drivers' .resume() callbacks have been executed and tasks have been thawed. diff --git a/Documentation/power/opp.txt b/Documentation/power/opp.txt index cd445582d1f8..5ae70a12c1e2 100644 --- a/Documentation/power/opp.txt +++ b/Documentation/power/opp.txt @@ -178,7 +178,7 @@ opp_find_freq_ceil - Search for an available OPP which is *at least* the if (!IS_ERR(opp)) soc_switch_to_freq_voltage(freq); else - /* do something when we cant satisfy the req */ + /* do something when we can't satisfy the req */ /* do other stuff */ } diff --git a/Documentation/power/swsusp.txt b/Documentation/power/swsusp.txt index ea718891a665..ac190cf1963e 100644 --- a/Documentation/power/swsusp.txt +++ b/Documentation/power/swsusp.txt @@ -192,7 +192,7 @@ Q: There don't seem to be any generally useful behavioral distinctions between SUSPEND and FREEZE. A: Doing SUSPEND when you are asked to do FREEZE is always correct, -but it may be unneccessarily slow. If you want your driver to stay simple, +but it may be unnecessarily slow. If you want your driver to stay simple, slowness may not matter to you. It can always be fixed later. For devices like disk it does matter, you do not want to spindown for @@ -237,7 +237,7 @@ disk. Whole sequence goes like running system, user asks for suspend-to-disk - user processes are stopped (in common case there are none, but with resume-from-initrd, noone knows) + user processes are stopped (in common case there are none, but with resume-from-initrd, no one knows) read image from disk diff --git a/Documentation/power/userland-swsusp.txt b/Documentation/power/userland-swsusp.txt index 81680f9f5909..1101bee4e822 100644 --- a/Documentation/power/userland-swsusp.txt +++ b/Documentation/power/userland-swsusp.txt @@ -98,7 +98,7 @@ SNAPSHOT_S2RAM - suspend to RAM; using this call causes the kernel to The device's read() operation can be used to transfer the snapshot image from the kernel. It has the following limitations: - you cannot read() more than one virtual memory page at a time -- read()s accross page boundaries are impossible (ie. if ypu read() 1/2 of +- read()s across page boundaries are impossible (ie. if ypu read() 1/2 of a page in the previous call, you will only be able to read() _at_ _most_ 1/2 of the page in the next call) @@ -137,7 +137,7 @@ mechanism and the userland utilities using the interface SHOULD use additional means, such as checksums, to ensure the integrity of the snapshot image. The suspending and resuming utilities MUST lock themselves in memory, -preferrably using mlockall(), before calling SNAPSHOT_FREEZE. +preferably using mlockall(), before calling SNAPSHOT_FREEZE. The suspending utility MUST check the value stored by SNAPSHOT_CREATE_IMAGE in the memory location pointed to by the last argument of ioctl() and proceed @@ -147,7 +147,7 @@ in accordance with it: (a) The suspending utility MUST NOT close the snapshot device _unless_ the whole suspend procedure is to be cancelled, in which case, if the snapshot image has already been saved, the - suspending utility SHOULD destroy it, preferrably by zapping + suspending utility SHOULD destroy it, preferably by zapping its header. If the suspend is not to be cancelled, the system MUST be powered off or rebooted after the snapshot image has been saved. diff --git a/Documentation/powerpc/hvcs.txt b/Documentation/powerpc/hvcs.txt index 6d8be3468d7d..a730ca5a07f8 100644 --- a/Documentation/powerpc/hvcs.txt +++ b/Documentation/powerpc/hvcs.txt @@ -528,7 +528,7 @@ this driver assignment of hotplug added vty-servers may be in a different order than how they would be exposed on module load. Rebooting or reloading the module after dynamic addition may result in the /dev/hvcs* and vty-server coupling changing if a vty-server adapter was added in a -slot inbetween two other vty-server adapters. Refer to the section above +slot between two other vty-server adapters. Refer to the section above on how to determine which vty-server goes with which /dev/hvcs* node. Hint; look at the sysfs "index" attribute for the vty-server. diff --git a/Documentation/rapidio/rapidio.txt b/Documentation/rapidio/rapidio.txt new file mode 100644 index 000000000000..be70ee15f8ca --- /dev/null +++ b/Documentation/rapidio/rapidio.txt @@ -0,0 +1,173 @@ + The Linux RapidIO Subsystem + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The RapidIO standard is a packet-based fabric interconnect standard designed for +use in embedded systems. Development of the RapidIO standard is directed by the +RapidIO Trade Association (RTA). The current version of the RapidIO specification +is publicly available for download from the RTA web-site [1]. + +This document describes the basics of the Linux RapidIO subsystem and provides +information on its major components. + +1 Overview +---------- + +Because the RapidIO subsystem follows the Linux device model it is integrated +into the kernel similarly to other buses by defining RapidIO-specific device and +bus types and registering them within the device model. + +The Linux RapidIO subsystem is architecture independent and therefore defines +architecture-specific interfaces that provide support for common RapidIO +subsystem operations. + +2. Core Components +------------------ + +A typical RapidIO network is a combination of endpoints and switches. +Each of these components is represented in the subsystem by an associated data +structure. The core logical components of the RapidIO subsystem are defined +in include/linux/rio.h file. + +2.1 Master Port + +A master port (or mport) is a RapidIO interface controller that is local to the +processor executing the Linux code. A master port generates and receives RapidIO +packets (transactions). In the RapidIO subsystem each master port is represented +by a rio_mport data structure. This structure contains master port specific +resources such as mailboxes and doorbells. The rio_mport also includes a unique +host device ID that is valid when a master port is configured as an enumerating +host. + +RapidIO master ports are serviced by subsystem specific mport device drivers +that provide functionality defined for this subsystem. To provide a hardware +independent interface for RapidIO subsystem operations, rio_mport structure +includes rio_ops data structure which contains pointers to hardware specific +implementations of RapidIO functions. + +2.2 Device + +A RapidIO device is any endpoint (other than mport) or switch in the network. +All devices are presented in the RapidIO subsystem by corresponding rio_dev data +structure. Devices form one global device list and per-network device lists +(depending on number of available mports and networks). + +2.3 Switch + +A RapidIO switch is a special class of device that routes packets between its +ports towards their final destination. The packet destination port within a +switch is defined by an internal routing table. A switch is presented in the +RapidIO subsystem by rio_dev data structure expanded by additional rio_switch +data structure, which contains switch specific information such as copy of the +routing table and pointers to switch specific functions. + +The RapidIO subsystem defines the format and initialization method for subsystem +specific switch drivers that are designed to provide hardware-specific +implementation of common switch management routines. + +2.4 Network + +A RapidIO network is a combination of interconnected endpoint and switch devices. +Each RapidIO network known to the system is represented by corresponding rio_net +data structure. This structure includes lists of all devices and local master +ports that form the same network. It also contains a pointer to the default +master port that is used to communicate with devices within the network. + +3. Subsystem Initialization +--------------------------- + +In order to initialize the RapidIO subsystem, a platform must initialize and +register at least one master port within the RapidIO network. To register mport +within the subsystem controller driver initialization code calls function +rio_register_mport() for each available master port. After all active master +ports are registered with a RapidIO subsystem, the rio_init_mports() routine +is called to perform enumeration and discovery. + +In the current PowerPC-based implementation a subsys_initcall() is specified to +perform controller initialization and mport registration. At the end it directly +calls rio_init_mports() to execute RapidIO enumeration and discovery. + +4. Enumeration and Discovery +---------------------------- + +When rio_init_mports() is called it scans a list of registered master ports and +calls an enumeration or discovery routine depending on the configured role of a +master port: host or agent. + +Enumeration is performed by a master port if it is configured as a host port by +assigning a host device ID greater than or equal to zero. A host device ID is +assigned to a master port through the kernel command line parameter "riohdid=", +or can be configured in a platform-specific manner. If the host device ID for +a specific master port is set to -1, the discovery process will be performed +for it. + +The enumeration and discovery routines use RapidIO maintenance transactions +to access the configuration space of devices. + +The enumeration process is implemented according to the enumeration algorithm +outlined in the RapidIO Interconnect Specification: Annex I [1]. + +The enumeration process traverses the network using a recursive depth-first +algorithm. When a new device is found, the enumerator takes ownership of that +device by writing into the Host Device ID Lock CSR. It does this to ensure that +the enumerator has exclusive right to enumerate the device. If device ownership +is successfully acquired, the enumerator allocates a new rio_dev structure and +initializes it according to device capabilities. + +If the device is an endpoint, a unique device ID is assigned to it and its value +is written into the device's Base Device ID CSR. + +If the device is a switch, the enumerator allocates an additional rio_switch +structure to store switch specific information. Then the switch's vendor ID and +device ID are queried against a table of known RapidIO switches. Each switch +table entry contains a pointer to a switch-specific initialization routine that +initializes pointers to the rest of switch specific operations, and performs +hardware initialization if necessary. A RapidIO switch does not have a unique +device ID; it relies on hopcount and routing for device ID of an attached +endpoint if access to its configuration registers is required. If a switch (or +chain of switches) does not have any endpoint (except enumerator) attached to +it, a fake device ID will be assigned to configure a route to that switch. +In the case of a chain of switches without endpoint, one fake device ID is used +to configure a route through the entire chain and switches are differentiated by +their hopcount value. + +For both endpoints and switches the enumerator writes a unique component tag +into device's Component Tag CSR. That unique value is used by the error +management notification mechanism to identify a device that is reporting an +error management event. + +Enumeration beyond a switch is completed by iterating over each active egress +port of that switch. For each active link, a route to a default device ID +(0xFF for 8-bit systems and 0xFFFF for 16-bit systems) is temporarily written +into the routing table. The algorithm recurs by calling itself with hopcount + 1 +and the default device ID in order to access the device on the active port. + +After the host has completed enumeration of the entire network it releases +devices by clearing device ID locks (calls rio_clear_locks()). For each endpoint +in the system, it sets the Master Enable bit in the Port General Control CSR +to indicate that enumeration is completed and agents are allowed to execute +passive discovery of the network. + +The discovery process is performed by agents and is similar to the enumeration +process that is described above. However, the discovery process is performed +without changes to the existing routing because agents only gather information +about RapidIO network structure and are building an internal map of discovered +devices. This way each Linux-based component of the RapidIO subsystem has +a complete view of the network. The discovery process can be performed +simultaneously by several agents. After initializing its RapidIO master port +each agent waits for enumeration completion by the host for the configured wait +time period. If this wait time period expires before enumeration is completed, +an agent skips RapidIO discovery and continues with remaining kernel +initialization. + +5. References +------------- + +[1] RapidIO Trade Association. RapidIO Interconnect Specifications. + http://www.rapidio.org. +[2] Rapidio TA. Technology Comparisons. + http://www.rapidio.org/education/technology_comparisons/ +[3] RapidIO support for Linux. + http://lwn.net/Articles/139118/ +[4] Matt Porter. RapidIO for Linux. Ottawa Linux Symposium, 2005 + http://www.kernel.org/doc/ols/2005/ols2005v2-pages-43-56.pdf diff --git a/Documentation/rapidio/sysfs.txt b/Documentation/rapidio/sysfs.txt new file mode 100644 index 000000000000..97f71ce575d6 --- /dev/null +++ b/Documentation/rapidio/sysfs.txt @@ -0,0 +1,90 @@ + RapidIO sysfs Files + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +1. Device Subdirectories +------------------------ + +For each RapidIO device, the RapidIO subsystem creates files in an individual +subdirectory with the following name, /sys/bus/rapidio/devices/<device_name>. + +The format of device_name is "nn:d:iiii", where: + +nn - two-digit hexadecimal ID of RapidIO network where the device resides +d - device typr: 'e' - for endpoint or 's' - for switch +iiii - four-digit device destID for endpoints, or switchID for switches + +For example, below is a list of device directories that represents a typical +RapidIO network with one switch, one host, and two agent endpoints, as it is +seen by the enumerating host (destID = 1): + +/sys/bus/rapidio/devices/00:e:0000 +/sys/bus/rapidio/devices/00:e:0002 +/sys/bus/rapidio/devices/00:s:0001 + +NOTE: An enumerating or discovering endpoint does not create a sysfs entry for +itself, this is why an endpoint with destID=1 is not shown in the list. + +2. Attributes Common for All Devices +------------------------------------ + +Each device subdirectory contains the following informational read-only files: + + did - returns the device identifier + vid - returns the device vendor identifier +device_rev - returns the device revision level + asm_did - returns identifier for the assembly containing the device + asm_rev - returns revision level of the assembly containing the device + asm_vid - returns vendor identifier of the assembly containing the device + destid - returns device destination ID assigned by the enumeration routine + (see 4.1 for switch specific details) + lprev - returns name of previous device (switch) on the path to the device + that that owns this attribute + +In addition to the files listed above, each device has a binary attribute file +that allows read/write access to the device configuration registers using +the RapidIO maintenance transactions: + + config - reads from and writes to the device configuration registers. + +This attribute is similar in behavior to the "config" attribute of PCI devices +and provides an access to the RapidIO device registers using standard file read +and write operations. + +3. Endpoint Device Attributes +----------------------------- + +Currently Linux RapidIO subsystem does not create any endpoint specific sysfs +attributes. It is possible that RapidIO master port drivers and endpoint device +drivers will add their device-specific sysfs attributes but such attributes are +outside the scope of this document. + +4. Switch Device Attributes +--------------------------- + +RapidIO switches have additional attributes in sysfs. RapidIO subsystem supports +common and device-specific sysfs attributes for switches. Because switches are +integrated into the RapidIO subsystem, it offers a method to create +device-specific sysfs attributes by specifying a callback function that may be +set by the switch initialization routine during enumeration or discovery process. + +4.1 Common Switch Attributes + + routes - reports switch routing information in "destID port" format. This + attribute reports only valid routing table entries, one line for + each entry. + destid - device destination ID that defines a route to the switch + hopcount - number of hops on the path to the switch + lnext - returns names of devices linked to the switch except one of a device + linked to the ingress port (reported as "lprev"). This is an array + names with number of lines equal to number of ports in switch. If + a switch port has no attached device, returns "null" instead of + a device name. + +4.2 Device-specific Switch Attributes + +Device-specific switch attributes are listed for each RapidIO switch driver +that exports additional attributes. + +IDT_GEN2: + errlog - reads contents of device error log until it is empty. diff --git a/Documentation/s390/Debugging390.txt b/Documentation/s390/Debugging390.txt index 86f9f74b2b34..efe998becc5b 100644 --- a/Documentation/s390/Debugging390.txt +++ b/Documentation/s390/Debugging390.txt @@ -2273,7 +2273,7 @@ IP forwarding is on. There is a lot of useful info in here best found by going in & having a look around, so I'll take you through some entries I consider important. -All the processes running on the machine have there own entry defined by +All the processes running on the machine have their own entry defined by /proc/<pid> So lets have a look at the init process cd /proc/1 diff --git a/Documentation/scheduler/sched-design-CFS.txt b/Documentation/scheduler/sched-design-CFS.txt index 8239ebbcddce..99961993257a 100644 --- a/Documentation/scheduler/sched-design-CFS.txt +++ b/Documentation/scheduler/sched-design-CFS.txt @@ -164,7 +164,7 @@ This is the (partial) list of the hooks: It puts the scheduling entity (task) into the red-black tree and increments the nr_running variable. - - dequeue_tree(...) + - dequeue_task(...) When a task is no longer runnable, this function is called to keep the corresponding scheduling entity out of the red-black tree. It decrements @@ -195,11 +195,6 @@ This is the (partial) list of the hooks: This function is mostly called from time tick functions; it might lead to process switch. This drives the running preemption. - - task_new(...) - - The core scheduler gives the scheduling module an opportunity to manage new - task startup. The CFS scheduling module uses it for group scheduling, while - the scheduling module for a real-time task does not use it. diff --git a/Documentation/scheduler/sched-domains.txt b/Documentation/scheduler/sched-domains.txt index 373ceacc367e..b7ee379b651b 100644 --- a/Documentation/scheduler/sched-domains.txt +++ b/Documentation/scheduler/sched-domains.txt @@ -1,8 +1,7 @@ -Each CPU has a "base" scheduling domain (struct sched_domain). These are -accessed via cpu_sched_domain(i) and this_sched_domain() macros. The domain +Each CPU has a "base" scheduling domain (struct sched_domain). The domain hierarchy is built from these base domains via the ->parent pointer. ->parent -MUST be NULL terminated, and domain structures should be per-CPU as they -are locklessly updated. +MUST be NULL terminated, and domain structures should be per-CPU as they are +locklessly updated. Each scheduling domain spans a number of CPUs (stored in the ->span field). A domain's span MUST be a superset of it child's span (this restriction could @@ -26,11 +25,26 @@ is treated as one entity. The load of a group is defined as the sum of the load of each of its member CPUs, and only when the load of a group becomes out of balance are tasks moved between groups. -In kernel/sched.c, rebalance_tick is run periodically on each CPU. This -function takes its CPU's base sched domain and checks to see if has reached -its rebalance interval. If so, then it will run load_balance on that domain. -rebalance_tick then checks the parent sched_domain (if it exists), and the -parent of the parent and so forth. +In kernel/sched.c, trigger_load_balance() is run periodically on each CPU +through scheduler_tick(). It raises a softirq after the next regularly scheduled +rebalancing event for the current runqueue has arrived. The actual load +balancing workhorse, run_rebalance_domains()->rebalance_domains(), is then run +in softirq context (SCHED_SOFTIRQ). + +The latter function takes two arguments: the current CPU and whether it was idle +at the time the scheduler_tick() happened and iterates over all sched domains +our CPU is on, starting from its base domain and going up the ->parent chain. +While doing that, it checks to see if the current domain has exhausted its +rebalance interval. If so, it runs load_balance() on that domain. It then checks +the parent sched_domain (if it exists), and the parent of the parent and so +forth. + +Initially, load_balance() finds the busiest group in the current sched domain. +If it succeeds, it looks for the busiest runqueue of all the CPUs' runqueues in +that group. If it manages to find such a runqueue, it locks both our initial +CPU's runqueue and the newly found busiest one and starts moving tasks from it +to our runqueue. The exact number of tasks amounts to an imbalance previously +computed while iterating over this sched domain's groups. *** Implementing sched domains *** The "base" domain will "span" the first level of the hierarchy. In the case diff --git a/Documentation/scsi/ChangeLog.lpfc b/Documentation/scsi/ChangeLog.lpfc index 5e83769c6aa9..c56ec99d7b2f 100644 --- a/Documentation/scsi/ChangeLog.lpfc +++ b/Documentation/scsi/ChangeLog.lpfc @@ -352,7 +352,7 @@ Changes from 20041229 to 20050110 lpfc_scsiport.c * In remote port changes: no longer nulling target->pnode when removing from mapped list. Pnode get nulled when the node is - freed (after nodev tmo). This bug was causing i/o recieved in + freed (after nodev tmo). This bug was causing i/o received in the small window while the device was blocked to be errored w/ did_no_connect. With the fix, it returns host_busy (per the pre-remote port changes). @@ -530,7 +530,7 @@ Changes from 20041018 to 20041123 coherent mappings. Note: There are more consistent mappings that are using pci_dma_sync calls. Probably these should be removed as well. - * Modified lpfc_free_scsi_buf to accomodate all three scsi_buf + * Modified lpfc_free_scsi_buf to accommodate all three scsi_buf free types to alleviate miscellaneous panics with cable pull testing. * Set hotplug to default 0 and lpfc_target_remove to not remove @@ -583,7 +583,7 @@ Changes from 20041018 to 20041123 included more than once. * Replaced "set_current_state(TASK_UNINTERRUPTIBLE); schedule_timeout(timeout)" with "msleep(timeout)". - * Fixnode was loosing starget when rediscovered. We saw messages + * Fixnode was losing starget when rediscovered. We saw messages like: lpfc 0000:04:02.0: 0:0263 Cannot block scsi target as a result. Moved starget field into struct lpfc_target which is referenced from the node. @@ -604,7 +604,7 @@ Changes from 20041018 to 20041123 * Make 3 functions static: lpfc_get_hba_sym_node_name, lpfc_intr_prep and lpfc_setup_slim_access. Move lpfc_intr_prep and lpfc_setup_slim_access so they're defined before being used. - * Remove an unecessary list_del() in lpfc_hbadisc.c. + * Remove an unnecessary list_del() in lpfc_hbadisc.c. * Set nlp_state before calling lpfc_nlp_list() since this will potentially call fc_target_unblock which may cause a race in queuecommand by releasing host_lock. @@ -753,7 +753,7 @@ Changes from 20040908 to 20040920 * Changed version number to 8.0.12 * Removed used #defines: DEFAULT_PCI_LATENCY_CLOCKS and PCI_LATENCY_VALUE from lpfc_hw.h. - * Changes to accomodate rnid. + * Changes to accommodate rnid. * Fix RSCN handling so RSCN NS queries only effect NPorts found in RSCN data. * If we rcv a plogi on a NPort queued up for discovery, clear the @@ -813,7 +813,7 @@ Changes from 20040908 to 20040920 counter instead, brd_no isn't reused anymore. Also some tiny whitespace cleanups in surrounding code. * Reorder functions in lpfc_els.c to remove need for prototypes. - * Removed unsed prototypes from lpfc_crtn.h - + * Removed unused prototypes from lpfc_crtn.h - lpfc_ip_timeout_handler, lpfc_read_pci and lpfc_revoke. * Removed some unused prototypes from lpfc_crtn.h - lpfc_scsi_hba_reset, lpfc_scsi_issue_inqsn, @@ -863,7 +863,7 @@ Changes from 20040823 to 20040908 * Minimal support for SCSI flat space addressing/volume set addressing. Use 16 bits of LUN address so that flat addressing/VSA will work. - * Changed 2 occurences of if( 1 != f(x)) to if(f(x) != 1) + * Changed 2 occurrences of if( 1 != f(x)) to if(f(x) != 1) * Drop include of lpfc_cfgparm.h. * Reduce stack usage of lpfc_fdmi_cmd in lpfc_ct.c. * Add minimum range checking property to /sys write/store @@ -1449,7 +1449,7 @@ Changes from 20040402 to 20040409 * Removed lpfc_els_chk_latt from the lpfc_config_post function. lpfc_els_chk_latt will enable the link event interrupts when flogi is pending which causes two discovery state machines - running parallely. + running parallelly. * Add pci_disable_device to unload path. * Move lpfc_sleep_event from lpfc_fcp.c to lpfc_util_ioctl.c * Call dma_map_single() & pci_map_single() directly instead of via @@ -1590,7 +1590,7 @@ Changes from 20040326 to 20040402 ELX_WRITE_HS ELX_WRITE_HA ELX_WRITE_CA ELX_READ_HC ELX_READ_HS ELX_READ_HA ELX_READ_CA ELX_READ_MB ELX_RESET ELX_READ_HBA ELX_INSTANCE ELX_LIP. Also introduced - attribute "set" to be used in conjuction with the above + attribute "set" to be used in conjunction with the above attributes. * Removed DLINK, enque and deque declarations now that clock doesn't use them anymore diff --git a/Documentation/scsi/ChangeLog.megaraid b/Documentation/scsi/ChangeLog.megaraid index 5e07d320817d..d2052fdbedd2 100644 --- a/Documentation/scsi/ChangeLog.megaraid +++ b/Documentation/scsi/ChangeLog.megaraid @@ -168,7 +168,7 @@ Older Version : 2.20.4.6 (scsi module), 2.20.2.6 (cmm module) 1. Sorted out PCI IDs to remove megaraid support overlaps. Based on the patch from Daniel, sorted out PCI IDs along with - charactor node name change from 'megadev' to 'megadev_legacy' to avoid + character node name change from 'megadev' to 'megadev_legacy' to avoid conflict. --- Hopefully we'll be getting the build restriction zapped much sooner, diff --git a/Documentation/scsi/ChangeLog.ncr53c8xx b/Documentation/scsi/ChangeLog.ncr53c8xx index 8b278c10edfd..9288e3d8974a 100644 --- a/Documentation/scsi/ChangeLog.ncr53c8xx +++ b/Documentation/scsi/ChangeLog.ncr53c8xx @@ -200,7 +200,7 @@ Sun Feb 14:00 1999 Gerard Roudier (groudier@club-internet.fr) By default the driver uses both IRQF_SHARED and IRQF_DISABLED. Option 'ncr53c8xx=irqm:0x20' may be used when an IRQ is shared by a 53C8XX adapter and a network board. - - Tiny mispelling fixed (ABORT instead of ABRT). Was fortunately + - Tiny misspelling fixed (ABORT instead of ABRT). Was fortunately harmless. - Negotiate SYNC data transfers with CCS devices. diff --git a/Documentation/scsi/ChangeLog.sym53c8xx b/Documentation/scsi/ChangeLog.sym53c8xx index 02ffbc1e8a84..c1933707d0bc 100644 --- a/Documentation/scsi/ChangeLog.sym53c8xx +++ b/Documentation/scsi/ChangeLog.sym53c8xx @@ -457,7 +457,7 @@ Fri Jan 1 20:00 1999 Gerard Roudier (groudier@club-internet.fr) Sat Dec 19 21:00 1998 Gerard Roudier (groudier@club-internet.fr) * version sym53c8xx-1.0 - Define some new IO registers for the 896 (istat1, mbox0, mbox1) - - Revamp slighly the Symbios NVRAM lay-out based on the excerpt of + - Revamp slightly the Symbios NVRAM lay-out based on the excerpt of the header file I received from Symbios. - Check the PCI bus number for the boot order (Using a fast PCI controller behing a PCI-PCI bridge seems sub-optimal). diff --git a/Documentation/scsi/aha152x.txt b/Documentation/scsi/aha152x.txt index 29ce6d87e451..94848734ac66 100644 --- a/Documentation/scsi/aha152x.txt +++ b/Documentation/scsi/aha152x.txt @@ -124,7 +124,7 @@ in the partition table and therefore every operating system has to know the right geometry to be able to interpret it. Moreover there are certain limitations to the C/H/S addressing scheme, -namely the address space is limited to upto 255 heads, upto 63 sectors +namely the address space is limited to up to 255 heads, up to 63 sectors and a maximum of 1023 cylinders. The AHA-1522 BIOS calculates the geometry by fixing the number of heads diff --git a/Documentation/scsi/aic79xx.txt b/Documentation/scsi/aic79xx.txt index 16e054c9c70b..64ac7093c872 100644 --- a/Documentation/scsi/aic79xx.txt +++ b/Documentation/scsi/aic79xx.txt @@ -267,7 +267,7 @@ The following information is available in this file: Option: tag_info:{{value[,value...]}[,{value[,value...]}...]} Definition: Set the per-target tagged queue depth on a per controller basis. Both controllers and targets - may be ommitted indicating that they should retain + may be omitted indicating that they should retain the default tag depth. Examples: tag_info:{{16,32,32,64,8,8,,32,32,32,32,32,32,32,32,32} On Controller 0 @@ -291,7 +291,7 @@ The following information is available in this file: The rd_strm_bitmask is a 16 bit hex value in which each bit represents a target. Setting the target's bit to '1' enables read streaming for that - target. Controllers may be ommitted indicating that + target. Controllers may be omitted indicating that they should retain the default read streaming setting. Example: rd_strm:{0x0041} On Controller 0 @@ -313,7 +313,7 @@ The following information is available in this file: ----------------------------------------------------------------- Option: dv: {value[,value...]} Definition: Set Domain Validation Policy on a per-controller basis. - Controllers may be ommitted indicating that + Controllers may be omitted indicating that they should retain the default read streaming setting. Example: dv:{-1,0,,1,1,0} On Controller 0 leave DV at its default setting. @@ -340,7 +340,7 @@ The following information is available in this file: Option: precomp: {value[,value...]} Definition: Set IO Cell precompensation value on a per-controller basis. - Controllers may be ommitted indicating that + Controllers may be omitted indicating that they should retain the default precompensation setting. Example: precomp:{0x1} On Controller 0 set precompensation to 1. @@ -353,7 +353,7 @@ The following information is available in this file: ----------------------------------------------------------------- Option: slewrate: {value[,value...]} Definition: Set IO Cell slew rate on a per-controller basis. - Controllers may be ommitted indicating that + Controllers may be omitted indicating that they should retain the default slew rate setting. Example: slewrate:{0x1} On Controller 0 set slew rate to 1. @@ -366,7 +366,7 @@ The following information is available in this file: ----------------------------------------------------------------- Option: amplitude: {value[,value...]} Definition: Set IO Cell signal amplitude on a per-controller basis. - Controllers may be ommitted indicating that + Controllers may be omitted indicating that they should retain the default read streaming setting. Example: amplitude:{0x1} On Controller 0 set amplitude to 1. diff --git a/Documentation/scsi/ibmmca.txt b/Documentation/scsi/ibmmca.txt index 45d61ad8c6f7..ac41a9fcac77 100644 --- a/Documentation/scsi/ibmmca.txt +++ b/Documentation/scsi/ibmmca.txt @@ -303,7 +303,7 @@ (scb) and calls a local function issue_cmd(), which writes a scb command into subsystem I/O ports. Once the scb command is carried out, the interrupt_handler() is invoked. If a device is determined to be - existant and it has not assigned any ldn, it gets one dynamically. + existent and it has not assigned any ldn, it gets one dynamically. For this, the whole stuff is done in ibmmca_queuecommand(). 2.6 Abort & Reset Commands @@ -741,7 +741,7 @@ some error appeared, else it is undefined. Now, this is fixed. Before any SCB command gets queued, the tsb.dev_status is set to 0, so the cmd->result won't screw up Linux higher level drivers. - 2) The reset-function has slightly improved. This is still planed for + 2) The reset-function has slightly improved. This is still planned for abort. During the abort and the reset function, no interrupts are allowed. This is however quite hard to cope with, so the INT-status register is read. When the interrupt gets queued, one can find its diff --git a/Documentation/scsi/scsi-changer.txt b/Documentation/scsi/scsi-changer.txt index 032399b16a53..ade046ea7c17 100644 --- a/Documentation/scsi/scsi-changer.txt +++ b/Documentation/scsi/scsi-changer.txt @@ -102,7 +102,7 @@ Trouble? If you insmod the driver with "insmod debug=1", it will be verbose and prints a lot of stuff to the syslog. Compiling the kernel with -CONFIG_SCSI_CONSTANTS=y improves the quality of the error messages alot +CONFIG_SCSI_CONSTANTS=y improves the quality of the error messages a lot because the kernel will translate the error codes into human-readable strings then. diff --git a/Documentation/scsi/scsi_eh.txt b/Documentation/scsi/scsi_eh.txt index 7acbebb17fa6..6ff16b620d84 100644 --- a/Documentation/scsi/scsi_eh.txt +++ b/Documentation/scsi/scsi_eh.txt @@ -290,7 +290,7 @@ scmd->allowed. SCSI transports/LLDDs automatically acquire sense data on command failures (autosense). Autosense is recommended for performance reasons and as sense information could get out of - sync inbetween occurrence of CHECK CONDITION and this action. + sync between occurrence of CHECK CONDITION and this action. Note that if autosense is not supported, scmd->sense_buffer contains invalid sense data when error-completing the scmd diff --git a/Documentation/scsi/scsi_fc_transport.txt b/Documentation/scsi/scsi_fc_transport.txt index e00192de4d1c..f79282fc48d7 100644 --- a/Documentation/scsi/scsi_fc_transport.txt +++ b/Documentation/scsi/scsi_fc_transport.txt @@ -291,7 +291,7 @@ Transport <-> LLDD Interfaces : Vport support by LLDD: The LLDD indicates support for vports by supplying a vport_create() - function in the transport template. The presense of this function will + function in the transport template. The presence of this function will cause the creation of the new attributes on the fc_host. As part of the physical port completing its initialization relative to the transport, it should set the max_npiv_vports attribute to indicate the diff --git a/Documentation/scsi/sym53c8xx_2.txt b/Documentation/scsi/sym53c8xx_2.txt index 6f63b7989679..6af8f7a7770f 100644 --- a/Documentation/scsi/sym53c8xx_2.txt +++ b/Documentation/scsi/sym53c8xx_2.txt @@ -285,7 +285,7 @@ from the driver. 7. Profiling information -This driver does not provide profiling informations as did its predecessors. +This driver does not provide profiling information as did its predecessors. This feature was not this useful and added complexity to the code. As the driver code got more complex, I have decided to remove everything that didn't seem actually useful. diff --git a/Documentation/serial/moxa-smartio b/Documentation/serial/moxa-smartio index d10443918684..5d2a33be0bd8 100644 --- a/Documentation/serial/moxa-smartio +++ b/Documentation/serial/moxa-smartio @@ -473,7 +473,7 @@ Content spd_normal Use 38.4kb when the application requests 38.4kb. spd_cust Use the custom divisor to set the speed when the application requests 38.4kb. - divisor This option set the custom divison. + divisor This option set the custom division. baud_base This option set the base baud rate. ----------------------------------------------------------------------------- diff --git a/Documentation/serial/n_gsm.txt b/Documentation/serial/n_gsm.txt index 397f41a1f153..a5d91126a8f7 100644 --- a/Documentation/serial/n_gsm.txt +++ b/Documentation/serial/n_gsm.txt @@ -34,7 +34,7 @@ Major parts of the initialization program : /* configure the serial port : speed, flow control ... */ /* send the AT commands to switch the modem to CMUX mode - and check that it's succesful (should return OK) */ + and check that it's successful (should return OK) */ write(fd, "AT+CMUX=0\r", 10); /* experience showed that some modems need some time before diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 3c1eddd9fcc7..9822afb6313c 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -322,7 +322,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. "port" needs to match the BASE ADDRESS jumper on the card (0x220 or 0x240) or the value stored in the card's EEPROM for cards that have an EEPROM and their "CONFIG MODE" jumper set to "EEPROM SETTING". The other values can - be choosen freely from the options enumerated above. + be chosen freely from the options enumerated above. If dma2 is specified and different from dma1, the card will operate in full-duplex mode. When dma1=3, only dma2=0 is valid and the only way to @@ -356,7 +356,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. "port" needs to match the BASE ADDRESS jumper on the card (0x220 or 0x240) or the value stored in the card's EEPROM for cards that have an EEPROM and their "CONFIG MODE" jumper set to "EEPROM SETTING". The other values can - be choosen freely from the options enumerated above. + be chosen freely from the options enumerated above. If dma2 is specified and different from dma1, the card will operate in full-duplex mode. When dma1=3, only dma2=0 is valid and the only way to @@ -2229,7 +2229,7 @@ Proc interfaces (/proc/asound) /proc/asound/card#/pcm#[cp]/oss ------------------------------- - String "erase" - erase all additional informations about OSS applications + String "erase" - erase all additional information about OSS applications String "<app_name> <fragments> <fragment_size> [<options>]" <app_name> - name of application with (higher priority) or without path diff --git a/Documentation/sound/alsa/SB-Live-mixer.txt b/Documentation/sound/alsa/SB-Live-mixer.txt index f5639d40521d..f4b5988f450c 100644 --- a/Documentation/sound/alsa/SB-Live-mixer.txt +++ b/Documentation/sound/alsa/SB-Live-mixer.txt @@ -87,14 +87,14 @@ accumulator. ALSA uses accumulators 0 and 1 for left and right PCM. The result is forwarded to the ADC capture FIFO (thus to the standard capture PCM device). -name='Music Playback Volume',index=0 +name='Synth Playback Volume',index=0 This control is used to attenuate samples for left and right MIDI FX-bus accumulators. ALSA uses accumulators 4 and 5 for left and right MIDI samples. The result samples are forwarded to the front DAC PCM slots of the AC97 codec. -name='Music Capture Volume',index=0 -name='Music Capture Switch',index=0 +name='Synth Capture Volume',index=0 +name='Synth Capture Switch',index=0 These controls are used to attenuate samples for left and right MIDI FX-bus accumulator. ALSA uses accumulators 4 and 5 for left and right PCM. diff --git a/Documentation/sound/oss/AudioExcelDSP16 b/Documentation/sound/oss/AudioExcelDSP16 index c0f08922993b..e0dc0641b480 100644 --- a/Documentation/sound/oss/AudioExcelDSP16 +++ b/Documentation/sound/oss/AudioExcelDSP16 @@ -1,10 +1,10 @@ Driver ------ -Informations about Audio Excel DSP 16 driver can be found in the source +Information about Audio Excel DSP 16 driver can be found in the source file aedsp16.c Please, read the head of the source before using it. It contain useful -informations. +information. Configuration ------------- @@ -68,7 +68,7 @@ Sound cards supported This driver supports the SC-6000 and SC-6600 based Gallant's sound card. It don't support the Audio Excel DSP 16 III (try the SC-6600 code). I'm working on the III version of the card: if someone have useful -informations about it, please let me know. +information about it, please let me know. For all the non-supported audio cards, you have to boot MS-DOS (or WIN95) activating the audio card with the MS-DOS device driver, then you have to <ctrl>-<alt>-<del> and boot Linux. diff --git a/Documentation/sound/oss/README.OSS b/Documentation/sound/oss/README.OSS index c615debbf08d..4be259428a1c 100644 --- a/Documentation/sound/oss/README.OSS +++ b/Documentation/sound/oss/README.OSS @@ -1352,7 +1352,7 @@ OSS-mixer. The PCM20 contains a radio tuner, which is also controlled by ACI. This radio tuner is supported by the ACI driver together with the miropcm20.o module. Also the 7-band equalizer is integrated -(limited by the OSS-design). Developement has started and maybe +(limited by the OSS-design). Development has started and maybe finished for the RDS decoder on this card, too. You will be able to read RadioText, the Programme Service name, Programme TYpe and others. Even the v4l radio module benefits from it with a refined diff --git a/Documentation/sound/oss/README.ymfsb b/Documentation/sound/oss/README.ymfsb index af8a7d3a4e8e..b6b77906b58d 100644 --- a/Documentation/sound/oss/README.ymfsb +++ b/Documentation/sound/oss/README.ymfsb @@ -5,7 +5,7 @@ FIRST OF ALL ============ This code references YAMAHA's sample codes and data sheets. - I respect and thank for all people they made open the informations + I respect and thank for all people they made open the information about YMF7xx cards. And this codes heavily based on Jeff Garzik <jgarzik@pobox.com>'s diff --git a/Documentation/spi/pxa2xx b/Documentation/spi/pxa2xx index 68a4fe3818a1..493dada57372 100644 --- a/Documentation/spi/pxa2xx +++ b/Documentation/spi/pxa2xx @@ -143,7 +143,7 @@ configured to use SSPFRM instead. NOTE: the SPI driver cannot control the chip select if SSPFRM is used, so the chipselect is dropped after each spi_transfer. Most devices need chip select asserted around the complete message. Use SSPFRM as a GPIO (through cs_control) -to accomodate these chips. +to accommodate these chips. NSSP SLAVE SAMPLE diff --git a/Documentation/spi/spi-lm70llp b/Documentation/spi/spi-lm70llp index 34a9cfd746bd..463f6d01fa15 100644 --- a/Documentation/spi/spi-lm70llp +++ b/Documentation/spi/spi-lm70llp @@ -46,7 +46,7 @@ The hardware interfacing on the LM70 LLP eval board is as follows: Note that since the LM70 uses a "3-wire" variant of SPI, the SI/SO pin is connected to both pin D7 (as Master Out) and Select (as Master In) -using an arrangment that lets either the parport or the LM70 pull the +using an arrangement that lets either the parport or the LM70 pull the pin low. This can't be shared with true SPI devices, but other 3-wire devices might share the same SI/SO pin. diff --git a/Documentation/target/tcm_mod_builder.py b/Documentation/target/tcm_mod_builder.py index dbeb8a0d7175..7ef9b843d529 100755 --- a/Documentation/target/tcm_mod_builder.py +++ b/Documentation/target/tcm_mod_builder.py @@ -239,8 +239,8 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += "#include <target/target_core_configfs.h>\n" buf += "#include <target/target_core_base.h>\n" buf += "#include <target/configfs_macros.h>\n\n" - buf += "#include <" + fabric_mod_name + "_base.h>\n" - buf += "#include <" + fabric_mod_name + "_fabric.h>\n\n" + buf += "#include \"" + fabric_mod_name + "_base.h\"\n" + buf += "#include \"" + fabric_mod_name + "_fabric.h\"\n\n" buf += "/* Local pointer to allocated TCM configfs fabric module */\n" buf += "struct target_fabric_configfs *" + fabric_mod_name + "_fabric_configfs;\n\n" @@ -289,6 +289,7 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += "{\n" buf += " struct " + fabric_mod_name + "_nacl *nacl = container_of(se_acl,\n" buf += " struct " + fabric_mod_name + "_nacl, se_node_acl);\n" + buf += " core_tpg_del_initiator_node_acl(se_acl->se_tpg, se_acl, 1);\n" buf += " kfree(nacl);\n" buf += "}\n\n" @@ -583,9 +584,9 @@ def tcm_mod_dump_fabric_ops(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += "#include <target/target_core_fabric_lib.h>\n" buf += "#include <target/target_core_device.h>\n" buf += "#include <target/target_core_tpg.h>\n" - buf += "#include <target/target_core_configfs.h>\n" - buf += "#include <" + fabric_mod_name + "_base.h>\n" - buf += "#include <" + fabric_mod_name + "_fabric.h>\n\n" + buf += "#include <target/target_core_configfs.h>\n\n" + buf += "#include \"" + fabric_mod_name + "_base.h\"\n" + buf += "#include \"" + fabric_mod_name + "_fabric.h\"\n\n" buf += "int " + fabric_mod_name + "_check_true(struct se_portal_group *se_tpg)\n" buf += "{\n" @@ -973,14 +974,13 @@ def tcm_mod_dump_fabric_ops(proto_ident, fabric_mod_dir_var, fabric_mod_name): def tcm_mod_build_kbuild(fabric_mod_dir_var, fabric_mod_name): buf = "" - f = fabric_mod_dir_var + "/Kbuild" + f = fabric_mod_dir_var + "/Makefile" print "Writing file: " + f p = open(f, 'w') if not p: tcm_mod_err("Unable to open file: " + f) - buf = "EXTRA_CFLAGS += -I$(srctree)/drivers/target/ -I$(srctree)/include/ -I$(srctree)/drivers/scsi/ -I$(srctree)/include/scsi/ -I$(srctree)/drivers/target/" + fabric_mod_name + "\n\n" buf += fabric_mod_name + "-objs := " + fabric_mod_name + "_fabric.o \\\n" buf += " " + fabric_mod_name + "_configfs.o\n" buf += "obj-$(CONFIG_" + fabric_mod_name.upper() + ") += " + fabric_mod_name + ".o\n" @@ -1018,7 +1018,7 @@ def tcm_mod_build_kconfig(fabric_mod_dir_var, fabric_mod_name): def tcm_mod_add_kbuild(tcm_dir, fabric_mod_name): buf = "obj-$(CONFIG_" + fabric_mod_name.upper() + ") += " + fabric_mod_name.lower() + "/\n" - kbuild = tcm_dir + "/drivers/target/Kbuild" + kbuild = tcm_dir + "/drivers/target/Makefile" f = open(kbuild, 'a') f.write(buf) @@ -1064,7 +1064,7 @@ def main(modname, proto_ident): tcm_mod_build_kbuild(fabric_mod_dir, fabric_mod_name) tcm_mod_build_kconfig(fabric_mod_dir, fabric_mod_name) - input = raw_input("Would you like to add " + fabric_mod_name + "to drivers/target/Kbuild..? [yes,no]: ") + input = raw_input("Would you like to add " + fabric_mod_name + "to drivers/target/Makefile..? [yes,no]: ") if input == "yes" or input == "y": tcm_mod_add_kbuild(tcm_dir, fabric_mod_name) diff --git a/Documentation/telephony/ixj.txt b/Documentation/telephony/ixj.txt index 4fb314d51702..db94fb6c5678 100644 --- a/Documentation/telephony/ixj.txt +++ b/Documentation/telephony/ixj.txt @@ -51,7 +51,7 @@ be removed to protect the rights of others. Specifically, very old Internet PhoneJACK cards have non-standard G.723.1 codecs (due to the early nature of the DSPs in those days). The auto-conversion code to bring those cards into compliance with -todays standards is available as a binary only module to those people +today's standards is available as a binary only module to those people needing it. If you bought your card after 1997 or so, you are OK - it's only the very old cards that are affected. diff --git a/Documentation/trace/ring-buffer-design.txt b/Documentation/trace/ring-buffer-design.txt index d299ff31df57..7d350b496585 100644 --- a/Documentation/trace/ring-buffer-design.txt +++ b/Documentation/trace/ring-buffer-design.txt @@ -237,7 +237,7 @@ with the previous write. |written | +---------+ |written | - +---------+ <--- next positon for write (current commit) + +---------+ <--- next position for write (current commit) | empty | +---------+ diff --git a/Documentation/video4linux/README.ivtv b/Documentation/video4linux/README.ivtv index 42b06686eb78..2579b5b709ed 100644 --- a/Documentation/video4linux/README.ivtv +++ b/Documentation/video4linux/README.ivtv @@ -36,8 +36,7 @@ Additional features for the PVR-350 (CX23415 based): * Provides comprehensive OSD (On Screen Display: ie. graphics overlaying the video signal) * Provides a framebuffer (allowing X applications to appear on the video - device) (this framebuffer is not yet part of the kernel. In the meantime it - is available from www.ivtvdriver.org). + device) * Supports raw YUV output. IMPORTANT: In case of problems first read this page: diff --git a/Documentation/video4linux/README.pvrusb2 b/Documentation/video4linux/README.pvrusb2 index a747200fe67c..2137b589276b 100644 --- a/Documentation/video4linux/README.pvrusb2 +++ b/Documentation/video4linux/README.pvrusb2 @@ -172,7 +172,7 @@ Source file list / functional overview: to provide a streaming API usable by a read() system call style of I/O. Right now this is the only layer on top of pvrusb2-io.[ch], however the underlying architecture here was intended to allow for - other styles of I/O to be implemented with additonal modules, like + other styles of I/O to be implemented with additional modules, like mmap()'ed buffers or something even more exotic. pvrusb2-main.c - This is the top level of the driver. Module level diff --git a/Documentation/video4linux/Zoran b/Documentation/video4linux/Zoran index 699b60e070d2..c40e3bab08fa 100644 --- a/Documentation/video4linux/Zoran +++ b/Documentation/video4linux/Zoran @@ -130,7 +130,7 @@ Card number: 4 Note: No module for the mse3000 is available yet Note: No module for the vpx3224 is available yet -Note: use encoder=X or decoder=X for non-default i2c chips (see i2c-id.h) +Note: use encoder=X or decoder=X for non-default i2c chips =========================== diff --git a/Documentation/video4linux/bttv/Insmod-options b/Documentation/video4linux/bttv/Insmod-options index bbe3ed667d91..14c065fa23ef 100644 --- a/Documentation/video4linux/bttv/Insmod-options +++ b/Documentation/video4linux/bttv/Insmod-options @@ -1,5 +1,5 @@ -Note: "modinfo <module>" prints various informations about a kernel +Note: "modinfo <module>" prints various information about a kernel module, among them a complete and up-to-date list of insmod options. This list tends to be outdated because it is updated manually ... diff --git a/Documentation/video4linux/bttv/README b/Documentation/video4linux/bttv/README index 3a367cdb664e..7cbf4fb6cf31 100644 --- a/Documentation/video4linux/bttv/README +++ b/Documentation/video4linux/bttv/README @@ -70,7 +70,7 @@ If you have trouble with some specific TV card, try to ask there instead of mailing me directly. The chance that someone with the same card listens there is much higher... -For problems with sound: There are alot of different systems used +For problems with sound: There are a lot of different systems used for TV sound all over the world. And there are also different chips which decode the audio signal. Reports about sound problems ("stereo does'nt work") are pretty useless unless you include some details diff --git a/Documentation/video4linux/bttv/README.freeze b/Documentation/video4linux/bttv/README.freeze index 4259dccc8287..5eddfa076cfb 100644 --- a/Documentation/video4linux/bttv/README.freeze +++ b/Documentation/video4linux/bttv/README.freeze @@ -33,7 +33,7 @@ state is stuck. I've seen reports that bttv 0.7.x crashes whereas 0.8.x works rock solid for some people. Thus probably a small buglet left somewhere in bttv -0.7.x. I have no idea where exactly, it works stable for me and alot of +0.7.x. I have no idea where exactly, it works stable for me and a lot of other people. But in case you have problems with the 0.7.x versions you can give 0.8.x a try ... diff --git a/Documentation/video4linux/bttv/Sound-FAQ b/Documentation/video4linux/bttv/Sound-FAQ index 1e6328f91083..395f6c6fdd98 100644 --- a/Documentation/video4linux/bttv/Sound-FAQ +++ b/Documentation/video4linux/bttv/Sound-FAQ @@ -2,13 +2,13 @@ bttv and sound mini howto ========================= -There are alot of different bt848/849/878/879 based boards available. +There are a lot of different bt848/849/878/879 based boards available. Making video work often is not a big deal, because this is handled completely by the bt8xx chip, which is common on all boards. But sound is handled in slightly different ways on each board. To handle the grabber boards correctly, there is a array tvcards[] in -bttv-cards.c, which holds the informations required for each board. +bttv-cards.c, which holds the information required for each board. Sound will work only, if the correct entry is used (for video it often makes no difference). The bttv driver prints a line to the kernel log, telling which card type is used. Like this one: diff --git a/Documentation/video4linux/et61x251.txt b/Documentation/video4linux/et61x251.txt index 1247566c4de3..e0cdae491858 100644 --- a/Documentation/video4linux/et61x251.txt +++ b/Documentation/video4linux/et61x251.txt @@ -191,10 +191,10 @@ Syntax: <n> Description: Debugging information level, from 0 to 3: 0 = none (use carefully) 1 = critical errors - 2 = significant informations + 2 = significant information 3 = more verbose messages Level 3 is useful for testing only, when only one device - is used at the same time. It also shows some more informations + is used at the same time. It also shows some more information about the hardware being detected. This module parameter can be changed at runtime thanks to the /sys filesystem interface. Default: 2 diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index 261776e0c5e1..5c542e60f51d 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -103,6 +103,7 @@ spca561 046d:092d Logitech QC Elch2 spca561 046d:092e Logitech QC Elch2 spca561 046d:092f Logitech QuickCam Express Plus sunplus 046d:0960 Logitech ClickSmart 420 +nw80x 046d:d001 Logitech QuickCam Pro (dark focus ring) sunplus 0471:0322 Philips DMVC1300K zc3xx 0471:0325 Philips SPC 200 NC zc3xx 0471:0326 Philips SPC 300 NC @@ -150,10 +151,12 @@ sunplus 04fc:5330 Digitrex 2110 sunplus 04fc:5360 Sunplus Generic spca500 04fc:7333 PalmPixDC85 sunplus 04fc:ffff Pure DigitalDakota +nw80x 0502:d001 DVC V6 spca501 0506:00df 3Com HomeConnect Lite sunplus 052b:1507 Megapixel 5 Pretec DC-1007 sunplus 052b:1513 Megapix V4 sunplus 052b:1803 MegaImage VI +nw80x 052b:d001 EZCam Pro p35u tv8532 0545:808b Veo Stingray tv8532 0545:8333 Veo Stingray sunplus 0546:3155 Polaroid PDC3070 @@ -177,6 +180,7 @@ sunplus 055f:c530 Mustek Gsmart LCD 3 sunplus 055f:c540 Gsmart D30 sunplus 055f:c630 Mustek MDC4000 sunplus 055f:c650 Mustek MDC5500Z +nw80x 055f:d001 Mustek Wcam 300 mini zc3xx 055f:d003 Mustek WCam300A zc3xx 055f:d004 Mustek WCam300 AN conex 0572:0041 Creative Notebook cx11646 @@ -195,14 +199,20 @@ gl860 05e3:0503 Genesys Logic PC Camera gl860 05e3:f191 Genesys Logic PC Camera spca561 060b:a001 Maxell Compact Pc PM3 zc3xx 0698:2003 CTX M730V built in +nw80x 06a5:0000 Typhoon Webcam 100 USB +nw80x 06a5:d001 Divio based webcams +nw80x 06a5:d800 Divio Chicony TwinkleCam, Trust SpaceCam spca500 06bd:0404 Agfa CL20 spca500 06be:0800 Optimedia +nw80x 06be:d001 EZCam Pro p35u sunplus 06d6:0031 Trust 610 LCD PowerC@m Zoom spca506 06e1:a190 ADS Instant VCD +ov534 06f8:3002 Hercules Blog Webcam ov534_9 06f8:3003 Hercules Dualpix HD Weblog sonixj 06f8:3004 Hercules Classic Silver sonixj 06f8:3008 Hercules Deluxe Optical Glass pac7302 06f8:3009 Hercules Classic Link +nw80x 0728:d001 AVerMedia Camguard spca508 0733:0110 ViewQuest VQ110 spca501 0733:0401 Intel Create and Share spca501 0733:0402 ViewQuest M318B diff --git a/Documentation/video4linux/omap3isp.txt b/Documentation/video4linux/omap3isp.txt new file mode 100644 index 000000000000..69be2c782b98 --- /dev/null +++ b/Documentation/video4linux/omap3isp.txt @@ -0,0 +1,278 @@ +OMAP 3 Image Signal Processor (ISP) driver + +Copyright (C) 2010 Nokia Corporation +Copyright (C) 2009 Texas Instruments, Inc. + +Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + Sakari Ailus <sakari.ailus@iki.fi> + David Cohen <dacohen@gmail.com> + + +Introduction +============ + +This file documents the Texas Instruments OMAP 3 Image Signal Processor (ISP) +driver located under drivers/media/video/omap3isp. The original driver was +written by Texas Instruments but since that it has been rewritten (twice) at +Nokia. + +The driver has been successfully used on the following versions of OMAP 3: + + 3430 + 3530 + 3630 + +The driver implements V4L2, Media controller and v4l2_subdev interfaces. +Sensor, lens and flash drivers using the v4l2_subdev interface in the kernel +are supported. + + +Split to subdevs +================ + +The OMAP 3 ISP is split into V4L2 subdevs, each of the blocks inside the ISP +having one subdev to represent it. Each of the subdevs provide a V4L2 subdev +interface to userspace. + + OMAP3 ISP CCP2 + OMAP3 ISP CSI2a + OMAP3 ISP CCDC + OMAP3 ISP preview + OMAP3 ISP resizer + OMAP3 ISP AEWB + OMAP3 ISP AF + OMAP3 ISP histogram + +Each possible link in the ISP is modelled by a link in the Media controller +interface. For an example program see [2]. + + +Controlling the OMAP 3 ISP +========================== + +In general, the settings given to the OMAP 3 ISP take effect at the beginning +of the following frame. This is done when the module becomes idle during the +vertical blanking period on the sensor. In memory-to-memory operation the pipe +is run one frame at a time. Applying the settings is done between the frames. + +All the blocks in the ISP, excluding the CSI-2 and possibly the CCP2 receiver, +insist on receiving complete frames. Sensors must thus never send the ISP +partial frames. + +Autoidle does have issues with some ISP blocks on the 3430, at least. +Autoidle is only enabled on 3630 when the omap3isp module parameter autoidle +is non-zero. + + +Events +====== + +The OMAP 3 ISP driver does support the V4L2 event interface on CCDC and +statistics (AEWB, AF and histogram) subdevs. + +The CCDC subdev produces V4L2_EVENT_OMAP3ISP_HS_VS type event on HS_VS +interrupt which is used to signal frame start. The event is triggered exactly +when the reception of the first line of the frame starts in the CCDC module. +The event can be subscribed on the CCDC subdev. + +(When using parallel interface one must pay account to correct configuration +of the VS signal polarity. This is automatically correct when using the serial +receivers.) + +Each of the statistics subdevs is able to produce events. An event is +generated whenever a statistics buffer can be dequeued by a user space +application using the VIDIOC_OMAP3ISP_STAT_REQ IOCTL. The events available +are: + + V4L2_EVENT_OMAP3ISP_AEWB + V4L2_EVENT_OMAP3ISP_AF + V4L2_EVENT_OMAP3ISP_HIST + +The type of the event data is struct omap3isp_stat_event_status for these +ioctls. If there is an error calculating the statistics, there will be an +event as usual, but no related statistics buffer. In this case +omap3isp_stat_event_status.buf_err is set to non-zero. + + +Private IOCTLs +============== + +The OMAP 3 ISP driver supports standard V4L2 IOCTLs and controls where +possible and practical. Much of the functions provided by the ISP, however, +does not fall under the standard IOCTLs --- gamma tables and configuration of +statistics collection are examples of such. + +In general, there is a private ioctl for configuring each of the blocks +containing hardware-dependent functions. + +The following private IOCTLs are supported: + + VIDIOC_OMAP3ISP_CCDC_CFG + VIDIOC_OMAP3ISP_PRV_CFG + VIDIOC_OMAP3ISP_AEWB_CFG + VIDIOC_OMAP3ISP_HIST_CFG + VIDIOC_OMAP3ISP_AF_CFG + VIDIOC_OMAP3ISP_STAT_REQ + VIDIOC_OMAP3ISP_STAT_EN + +The parameter structures used by these ioctls are described in +include/linux/omap3isp.h. The detailed functions of the ISP itself related to +a given ISP block is described in the Technical Reference Manuals (TRMs) --- +see the end of the document for those. + +While it is possible to use the ISP driver without any use of these private +IOCTLs it is not possible to obtain optimal image quality this way. The AEWB, +AF and histogram modules cannot be used without configuring them using the +appropriate private IOCTLs. + + +CCDC and preview block IOCTLs +============================= + +The VIDIOC_OMAP3ISP_CCDC_CFG and VIDIOC_OMAP3ISP_PRV_CFG IOCTLs are used to +configure, enable and disable functions in the CCDC and preview blocks, +respectively. Both IOCTLs control several functions in the blocks they +control. VIDIOC_OMAP3ISP_CCDC_CFG IOCTL accepts a pointer to struct +omap3isp_ccdc_update_config as its argument. Similarly VIDIOC_OMAP3ISP_PRV_CFG +accepts a pointer to struct omap3isp_prev_update_config. The definition of +both structures is available in [1]. + +The update field in the structures tells whether to update the configuration +for the specific function and the flag tells whether to enable or disable the +function. + +The update and flag bit masks accept the following values. Each separate +functions in the CCDC and preview blocks is associated with a flag (either +disable or enable; part of the flag field in the structure) and a pointer to +configuration data for the function. + +Valid values for the update and flag fields are listed here for +VIDIOC_OMAP3ISP_CCDC_CFG. Values may be or'ed to configure more than one +function in the same IOCTL call. + + OMAP3ISP_CCDC_ALAW + OMAP3ISP_CCDC_LPF + OMAP3ISP_CCDC_BLCLAMP + OMAP3ISP_CCDC_BCOMP + OMAP3ISP_CCDC_FPC + OMAP3ISP_CCDC_CULL + OMAP3ISP_CCDC_CONFIG_LSC + OMAP3ISP_CCDC_TBL_LSC + +The corresponding values for the VIDIOC_OMAP3ISP_PRV_CFG are here: + + OMAP3ISP_PREV_LUMAENH + OMAP3ISP_PREV_INVALAW + OMAP3ISP_PREV_HRZ_MED + OMAP3ISP_PREV_CFA + OMAP3ISP_PREV_CHROMA_SUPP + OMAP3ISP_PREV_WB + OMAP3ISP_PREV_BLKADJ + OMAP3ISP_PREV_RGB2RGB + OMAP3ISP_PREV_COLOR_CONV + OMAP3ISP_PREV_YC_LIMIT + OMAP3ISP_PREV_DEFECT_COR + OMAP3ISP_PREV_GAMMABYPASS + OMAP3ISP_PREV_DRK_FRM_CAPTURE + OMAP3ISP_PREV_DRK_FRM_SUBTRACT + OMAP3ISP_PREV_LENS_SHADING + OMAP3ISP_PREV_NF + OMAP3ISP_PREV_GAMMA + +The associated configuration pointer for the function may not be NULL when +enabling the function. When disabling a function the configuration pointer is +ignored. + + +Statistic blocks IOCTLs +======================= + +The statistics subdevs do offer more dynamic configuration options than the +other subdevs. They can be enabled, disable and reconfigured when the pipeline +is in streaming state. + +The statistics blocks always get the input image data from the CCDC (as the +histogram memory read isn't implemented). The statistics are dequeueable by +the user from the statistics subdev nodes using private IOCTLs. + +The private IOCTLs offered by the AEWB, AF and histogram subdevs are heavily +reflected by the register level interface offered by the ISP hardware. There +are aspects that are purely related to the driver implementation and these are +discussed next. + +VIDIOC_OMAP3ISP_STAT_EN +----------------------- + +This private IOCTL enables/disables a statistic module. If this request is +done before streaming, it will take effect as soon as the pipeline starts to +stream. If the pipeline is already streaming, it will take effect as soon as +the CCDC becomes idle. + +VIDIOC_OMAP3ISP_AEWB_CFG, VIDIOC_OMAP3ISP_HIST_CFG and VIDIOC_OMAP3ISP_AF_CFG +----------------------------------------------------------------------------- + +Those IOCTLs are used to configure the modules. They require user applications +to have an in-depth knowledge of the hardware. Most of the fields explanation +can be found on OMAP's TRMs. The two following fields common to all the above +configure private IOCTLs require explanation for better understanding as they +are not part of the TRM. + +omap3isp_[h3a_af/h3a_aewb/hist]_config.buf_size: + +The modules handle their buffers internally. The necessary buffer size for the +module's data output depends on the requested configuration. Although the +driver supports reconfiguration while streaming, it does not support a +reconfiguration which requires bigger buffer size than what is already +internally allocated if the module is enabled. It will return -EBUSY on this +case. In order to avoid such condition, either disable/reconfigure/enable the +module or request the necessary buffer size during the first configuration +while the module is disabled. + +The internal buffer size allocation considers the requested configuration's +minimum buffer size and the value set on buf_size field. If buf_size field is +out of [minimum, maximum] buffer size range, it's clamped to fit in there. +The driver then selects the biggest value. The corrected buf_size value is +written back to user application. + +omap3isp_[h3a_af/h3a_aewb/hist]_config.config_counter: + +As the configuration doesn't take effect synchronously to the request, the +driver must provide a way to track this information to provide more accurate +data. After a configuration is requested, the config_counter returned to user +space application will be an unique value associated to that request. When +user application receives an event for buffer availability or when a new +buffer is requested, this config_counter is used to match a buffer data and a +configuration. + +VIDIOC_OMAP3ISP_STAT_REQ +------------------------ + +Send to user space the oldest data available in the internal buffer queue and +discards such buffer afterwards. The field omap3isp_stat_data.frame_number +matches with the video buffer's field_count. + + +Technical reference manuals (TRMs) and other documentation +========================================================== + +OMAP 3430 TRM: +<URL:http://focus.ti.com/pdfs/wtbu/OMAP34xx_ES3.1.x_PUBLIC_TRM_vZM.zip> +Referenced 2011-03-05. + +OMAP 35xx TRM: +<URL:http://www.ti.com/litv/pdf/spruf98o> Referenced 2011-03-05. + +OMAP 3630 TRM: +<URL:http://focus.ti.com/pdfs/wtbu/OMAP36xx_ES1.x_PUBLIC_TRM_vQ.zip> +Referenced 2011-03-05. + +DM 3730 TRM: +<URL:http://www.ti.com/litv/pdf/sprugn4h> Referenced 2011-03-06. + + +References +========== + +[1] include/linux/omap3isp.h + +[2] http://git.ideasonboard.org/?p=media-ctl.git;a=summary diff --git a/Documentation/video4linux/pxa_camera.txt b/Documentation/video4linux/pxa_camera.txt index 4f6d0ca01956..51ed1578b0e8 100644 --- a/Documentation/video4linux/pxa_camera.txt +++ b/Documentation/video4linux/pxa_camera.txt @@ -84,12 +84,12 @@ DMA usage transfer is not started. On "End Of Frame" interrupt, the irq handler starts the DMA chain. - capture of one videobuffer - The DMA chain starts transfering data into videobuffer RAM pages. - When all pages are transfered, the DMA irq is raised on "ENDINTR" status + The DMA chain starts transferring data into videobuffer RAM pages. + When all pages are transferred, the DMA irq is raised on "ENDINTR" status - finishing one videobuffer The DMA irq handler marks the videobuffer as "done", and removes it from the active running queue - Meanwhile, the next videobuffer (if there is one), is transfered by DMA + Meanwhile, the next videobuffer (if there is one), is transferred by DMA - finishing the last videobuffer On the DMA irq of the last videobuffer, the QCI is stopped. @@ -101,7 +101,7 @@ DMA usage This structure is pointed by dma->sg_cpu. The descriptors are used as follows : - - desc-sg[i]: i-th descriptor, transfering the i-th sg + - desc-sg[i]: i-th descriptor, transferring the i-th sg element to the video buffer scatter gather - finisher: has ddadr=DADDR_STOP, dcmd=ENDIRQEN - linker: has ddadr= desc-sg[0] of next video buffer, dcmd=0 diff --git a/Documentation/video4linux/sh_mobile_ceu_camera.txt b/Documentation/video4linux/sh_mobile_ceu_camera.txt index cb47e723af74..1e96ce6e2d2f 100644 --- a/Documentation/video4linux/sh_mobile_ceu_camera.txt +++ b/Documentation/video4linux/sh_mobile_ceu_camera.txt @@ -37,7 +37,7 @@ Generic scaling / cropping scheme -1'- In the above chart minuses and slashes represent "real" data amounts, points and -accents represent "useful" data, basically, CEU scaled amd cropped output, +accents represent "useful" data, basically, CEU scaled and cropped output, mapped back onto the client's source plane. Such a configuration can be produced by user requests: @@ -65,7 +65,7 @@ Do not touch input rectangle - it is already optimal. 1. Calculate current sensor scales: - scale_s = ((3') - (3)) / ((2') - (2)) + scale_s = ((2') - (2)) / ((3') - (3)) 2. Calculate "effective" input crop (sensor subwindow) - CEU crop scaled back at current sensor scales onto input window - this is user S_CROP: @@ -80,7 +80,7 @@ window: 4. Calculate sensor output window by applying combined scales to real input window: - width_s_out = ((2') - (2)) / scale_comb + width_s_out = ((7') - (7)) = ((2') - (2)) / scale_comb 5. Apply iterative sensor S_FMT for sensor output window. diff --git a/Documentation/video4linux/sn9c102.txt b/Documentation/video4linux/sn9c102.txt index 73de4050d637..b4f67040403a 100644 --- a/Documentation/video4linux/sn9c102.txt +++ b/Documentation/video4linux/sn9c102.txt @@ -214,10 +214,10 @@ Syntax: <n> Description: Debugging information level, from 0 to 3: 0 = none (use carefully) 1 = critical errors - 2 = significant informations + 2 = significant information 3 = more verbose messages Level 3 is useful for testing only. It also shows some more - informations about the hardware being detected. + information about the hardware being detected. This parameter can be changed at runtime thanks to the /sys filesystem interface. Default: 2 diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt index f22f35c271f3..cf21f7aae976 100644 --- a/Documentation/video4linux/v4l2-framework.txt +++ b/Documentation/video4linux/v4l2-framework.txt @@ -71,6 +71,10 @@ sub-device instances, the video_device struct stores V4L2 device node data and in the future a v4l2_fh struct will keep track of filehandle instances (this is not yet implemented). +The V4L2 framework also optionally integrates with the media framework. If a +driver sets the struct v4l2_device mdev field, sub-devices and video nodes +will automatically appear in the media framework as entities. + struct v4l2_device ------------------ @@ -83,11 +87,20 @@ You must register the device instance: v4l2_device_register(struct device *dev, struct v4l2_device *v4l2_dev); -Registration will initialize the v4l2_device struct and link dev->driver_data -to v4l2_dev. If v4l2_dev->name is empty then it will be set to a value derived -from dev (driver name followed by the bus_id, to be precise). If you set it -up before calling v4l2_device_register then it will be untouched. If dev is -NULL, then you *must* setup v4l2_dev->name before calling v4l2_device_register. +Registration will initialize the v4l2_device struct. If the dev->driver_data +field is NULL, it will be linked to v4l2_dev. + +Drivers that want integration with the media device framework need to set +dev->driver_data manually to point to the driver-specific device structure +that embed the struct v4l2_device instance. This is achieved by a +dev_set_drvdata() call before registering the V4L2 device instance. They must +also set the struct v4l2_device mdev field to point to a properly initialized +and registered media_device instance. + +If v4l2_dev->name is empty then it will be set to a value derived from dev +(driver name followed by the bus_id, to be precise). If you set it up before +calling v4l2_device_register then it will be untouched. If dev is NULL, then +you *must* setup v4l2_dev->name before calling v4l2_device_register. You can use v4l2_device_set_name() to set the name based on a driver name and a driver-global atomic_t instance. This will generate names like ivtv0, ivtv1, @@ -108,6 +121,7 @@ You unregister with: v4l2_device_unregister(struct v4l2_device *v4l2_dev); +If the dev->driver_data field points to v4l2_dev, it will be reset to NULL. Unregistering will also automatically unregister all subdevs from the device. If you have a hotpluggable device (e.g. a USB device), then when a disconnect @@ -167,6 +181,21 @@ static int __devinit drv_probe(struct pci_dev *pdev, state->instance = atomic_inc_return(&drv_instance) - 1; } +If you have multiple device nodes then it can be difficult to know when it is +safe to unregister v4l2_device. For this purpose v4l2_device has refcounting +support. The refcount is increased whenever video_register_device is called and +it is decreased whenever that device node is released. When the refcount reaches +zero, then the v4l2_device release() callback is called. You can do your final +cleanup there. + +If other device nodes (e.g. ALSA) are created, then you can increase and +decrease the refcount manually as well by calling: + +void v4l2_device_get(struct v4l2_device *v4l2_dev); + +or: + +int v4l2_device_put(struct v4l2_device *v4l2_dev); struct v4l2_subdev ------------------ @@ -254,6 +283,26 @@ A sub-device driver initializes the v4l2_subdev struct using: Afterwards you need to initialize subdev->name with a unique name and set the module owner. This is done for you if you use the i2c helper functions. +If integration with the media framework is needed, you must initialize the +media_entity struct embedded in the v4l2_subdev struct (entity field) by +calling media_entity_init(): + + struct media_pad *pads = &my_sd->pads; + int err; + + err = media_entity_init(&sd->entity, npads, pads, 0); + +The pads array must have been previously initialized. There is no need to +manually set the struct media_entity type and name fields, but the revision +field must be initialized if needed. + +A reference to the entity will be automatically acquired/released when the +subdev device node (if any) is opened/closed. + +Don't forget to cleanup the media entity before the sub-device is destroyed: + + media_entity_cleanup(&sd->entity); + A device (bridge) driver needs to register the v4l2_subdev with the v4l2_device: @@ -263,6 +312,9 @@ This can fail if the subdev module disappeared before it could be registered. After this function was called successfully the subdev->dev field points to the v4l2_device. +If the v4l2_device parent device has a non-NULL mdev field, the sub-device +entity will be automatically registered with the media device. + You can unregister a sub-device using: v4l2_device_unregister_subdev(sd); @@ -291,7 +343,7 @@ ignored. If you want to check for errors use this: err = v4l2_device_call_until_err(v4l2_dev, 0, core, g_chip_ident, &chip); Any error except -ENOIOCTLCMD will exit the loop with that error. If no -errors (except -ENOIOCTLCMD) occured, then 0 is returned. +errors (except -ENOIOCTLCMD) occurred, then 0 is returned. The second argument to both calls is a group ID. If 0, then all subdevs are called. If non-zero, then only those whose group ID match that value will @@ -319,6 +371,61 @@ controlled through GPIO pins. This distinction is only relevant when setting up the device, but once the subdev is registered it is completely transparent. +V4L2 sub-device userspace API +----------------------------- + +Beside exposing a kernel API through the v4l2_subdev_ops structure, V4L2 +sub-devices can also be controlled directly by userspace applications. + +Device nodes named v4l-subdevX can be created in /dev to access sub-devices +directly. If a sub-device supports direct userspace configuration it must set +the V4L2_SUBDEV_FL_HAS_DEVNODE flag before being registered. + +After registering sub-devices, the v4l2_device driver can create device nodes +for all registered sub-devices marked with V4L2_SUBDEV_FL_HAS_DEVNODE by calling +v4l2_device_register_subdev_nodes(). Those device nodes will be automatically +removed when sub-devices are unregistered. + +The device node handles a subset of the V4L2 API. + +VIDIOC_QUERYCTRL +VIDIOC_QUERYMENU +VIDIOC_G_CTRL +VIDIOC_S_CTRL +VIDIOC_G_EXT_CTRLS +VIDIOC_S_EXT_CTRLS +VIDIOC_TRY_EXT_CTRLS + + The controls ioctls are identical to the ones defined in V4L2. They + behave identically, with the only exception that they deal only with + controls implemented in the sub-device. Depending on the driver, those + controls can be also be accessed through one (or several) V4L2 device + nodes. + +VIDIOC_DQEVENT +VIDIOC_SUBSCRIBE_EVENT +VIDIOC_UNSUBSCRIBE_EVENT + + The events ioctls are identical to the ones defined in V4L2. They + behave identically, with the only exception that they deal only with + events generated by the sub-device. Depending on the driver, those + events can also be reported by one (or several) V4L2 device nodes. + + Sub-device drivers that want to use events need to set the + V4L2_SUBDEV_USES_EVENTS v4l2_subdev::flags and initialize + v4l2_subdev::nevents to events queue depth before registering the + sub-device. After registration events can be queued as usual on the + v4l2_subdev::devnode device node. + + To properly support events, the poll() file operation is also + implemented. + +Private ioctls + + All ioctls not in the above list are passed directly to the sub-device + driver through the core::ioctl operation. + + I2C sub-device drivers ---------------------- @@ -457,6 +564,10 @@ You should also set these fields: Otherwise you give it a pointer to a struct mutex_lock and before any of the v4l2_file_operations is called this lock will be taken by the core and released afterwards. +- prio: keeps track of the priorities. Used to implement VIDIOC_G/S_PRIORITY. + If left to NULL, then it will use the struct v4l2_prio_state in v4l2_device. + If you want to have a separate priority state per (group of) device node(s), + then you can point it to your own struct v4l2_prio_state. - parent: you only set this if v4l2_device was registered with NULL as the parent device struct. This only happens in cases where one hardware device has multiple PCI devices that all share the same v4l2_device core. @@ -466,13 +577,34 @@ You should also set these fields: (cx8802). Since the v4l2_device cannot be associated with a particular PCI device it is setup without a parent device. But when the struct video_device is setup you do know which parent PCI device to use. +- flags: optional. Set to V4L2_FL_USE_FH_PRIO if you want to let the framework + handle the VIDIOC_G/S_PRIORITY ioctls. This requires that you use struct + v4l2_fh. Eventually this flag will disappear once all drivers use the core + priority handling. But for now it has to be set explicitly. -If you use v4l2_ioctl_ops, then you should set either .unlocked_ioctl or -.ioctl to video_ioctl2 in your v4l2_file_operations struct. +If you use v4l2_ioctl_ops, then you should set .unlocked_ioctl to video_ioctl2 +in your v4l2_file_operations struct. + +Do not use .ioctl! This is deprecated and will go away in the future. The v4l2_file_operations struct is a subset of file_operations. The main difference is that the inode argument is omitted since it is never used. +If integration with the media framework is needed, you must initialize the +media_entity struct embedded in the video_device struct (entity field) by +calling media_entity_init(): + + struct media_pad *pad = &my_vdev->pad; + int err; + + err = media_entity_init(&vdev->entity, 1, pad, 0); + +The pads array must have been previously initialized. There is no need to +manually set the struct media_entity type and name fields. + +A reference to the entity will be automatically acquired/released when the +video device is opened/closed. + v4l2_file_operations and locking -------------------------------- @@ -502,6 +634,9 @@ for you. return err; } +If the v4l2_device parent device has a non-NULL mdev field, the video device +entity will be automatically registered with the media device. + Which device is registered depends on the type argument. The following types exist: @@ -577,6 +712,13 @@ release, of course) will return an error as well. When the last user of the video device node exits, then the vdev->release() callback is called and you can do the final cleanup there. +Don't forget to cleanup the media entity associated with the video device if +it has been initialized: + + media_entity_cleanup(&vdev->entity); + +This can be done from the release callback. + video_device helper functions ----------------------------- @@ -636,39 +778,25 @@ struct v4l2_fh -------------- struct v4l2_fh provides a way to easily keep file handle specific data -that is used by the V4L2 framework. Using v4l2_fh is optional for -drivers. +that is used by the V4L2 framework. New drivers must use struct v4l2_fh +since it is also used to implement priority handling (VIDIOC_G/S_PRIORITY) +if the video_device flag V4L2_FL_USE_FH_PRIO is also set. The users of v4l2_fh (in the V4L2 framework, not the driver) know whether a driver uses v4l2_fh as its file->private_data pointer by -testing the V4L2_FL_USES_V4L2_FH bit in video_device->flags. - -Useful functions: - -- v4l2_fh_init() - - Initialise the file handle. This *MUST* be performed in the driver's - v4l2_file_operations->open() handler. - -- v4l2_fh_add() +testing the V4L2_FL_USES_V4L2_FH bit in video_device->flags. This bit is +set whenever v4l2_fh_init() is called. - Add a v4l2_fh to video_device file handle list. May be called after - initialising the file handle. - -- v4l2_fh_del() - - Unassociate the file handle from video_device(). The file handle - exit function may now be called. +struct v4l2_fh is allocated as a part of the driver's own file handle +structure and file->private_data is set to it in the driver's open +function by the driver. -- v4l2_fh_exit() +In many cases the struct v4l2_fh will be embedded in a larger structure. +In that case you should call v4l2_fh_init+v4l2_fh_add in open() and +v4l2_fh_del+v4l2_fh_exit in release(). - Uninitialise the file handle. After uninitialisation the v4l2_fh - memory can be freed. - -struct v4l2_fh is allocated as a part of the driver's own file handle -structure and is set to file->private_data in the driver's open -function by the driver. Drivers can extract their own file handle -structure by using the container_of macro. Example: +Drivers can extract their own file handle structure by using the container_of +macro. Example: struct my_fh { int blah; @@ -685,15 +813,21 @@ int my_open(struct file *file) ... + my_fh = kzalloc(sizeof(*my_fh), GFP_KERNEL); + + ... + ret = v4l2_fh_init(&my_fh->fh, vfd); - if (ret) + if (ret) { + kfree(my_fh); return ret; + } - v4l2_fh_add(&my_fh->fh); + ... file->private_data = &my_fh->fh; - - ... + v4l2_fh_add(&my_fh->fh); + return 0; } int my_release(struct file *file) @@ -702,8 +836,65 @@ int my_release(struct file *file) struct my_fh *my_fh = container_of(fh, struct my_fh, fh); ... + v4l2_fh_del(&my_fh->fh); + v4l2_fh_exit(&my_fh->fh); + kfree(my_fh); + return 0; } +Below is a short description of the v4l2_fh functions used: + +int v4l2_fh_init(struct v4l2_fh *fh, struct video_device *vdev) + + Initialise the file handle. This *MUST* be performed in the driver's + v4l2_file_operations->open() handler. + +void v4l2_fh_add(struct v4l2_fh *fh) + + Add a v4l2_fh to video_device file handle list. Must be called once the + file handle is completely initialized. + +void v4l2_fh_del(struct v4l2_fh *fh) + + Unassociate the file handle from video_device(). The file handle + exit function may now be called. + +void v4l2_fh_exit(struct v4l2_fh *fh) + + Uninitialise the file handle. After uninitialisation the v4l2_fh + memory can be freed. + + +If struct v4l2_fh is not embedded, then you can use these helper functions: + +int v4l2_fh_open(struct file *filp) + + This allocates a struct v4l2_fh, initializes it and adds it to the struct + video_device associated with the file struct. + +int v4l2_fh_release(struct file *filp) + + This deletes it from the struct video_device associated with the file + struct, uninitialised the v4l2_fh and frees it. + +These two functions can be plugged into the v4l2_file_operation's open() and +release() ops. + + +Several drivers need to do something when the first file handle is opened and +when the last file handle closes. Two helper functions were added to check +whether the v4l2_fh struct is the only open filehandle of the associated +device node: + +int v4l2_fh_is_singular(struct v4l2_fh *fh) + + Returns 1 if the file handle is the only open file handle, else 0. + +int v4l2_fh_is_singular_file(struct file *filp) + + Same, but it calls v4l2_fh_is_singular with filp->private_data. + + V4L2 events ----------- diff --git a/Documentation/video4linux/w9968cf.txt b/Documentation/video4linux/w9968cf.txt index 05138e8aea07..9649450f3b90 100644 --- a/Documentation/video4linux/w9968cf.txt +++ b/Documentation/video4linux/w9968cf.txt @@ -413,7 +413,7 @@ Syntax: <n> Description: Debugging information level, from 0 to 6: 0 = none (use carefully) 1 = critical errors - 2 = significant informations + 2 = significant information 3 = configuration or general messages 4 = warnings 5 = called functions diff --git a/Documentation/video4linux/zc0301.txt b/Documentation/video4linux/zc0301.txt index befdfdacdc5b..b41c83cf09f4 100644 --- a/Documentation/video4linux/zc0301.txt +++ b/Documentation/video4linux/zc0301.txt @@ -181,10 +181,10 @@ Syntax: <n> Description: Debugging information level, from 0 to 3: 0 = none (use carefully) 1 = critical errors - 2 = significant informations + 2 = significant information 3 = more verbose messages Level 3 is useful for testing only, when only one device - is used at the same time. It also shows some more informations + is used at the same time. It also shows some information about the hardware being detected. This module parameter can be changed at runtime thanks to the /sys filesystem interface. Default: 2 @@ -261,7 +261,7 @@ the fingerprint is: '88E8 F32F 7244 68BA 3958 5D40 99DA 5D2A FCE6 35A4'. 11. Credits =========== -- Informations about the chip internals needed to enable the I2C protocol have +- Information about the chip internals needed to enable the I2C protocol have been taken from the documentation of the ZC030x Video4Linux1 driver written by Andrew Birkett <andy@nobugs.org>; - The initialization values of the ZC0301 controller connected to the PAS202BCB diff --git a/Documentation/vm/active_mm.txt b/Documentation/vm/active_mm.txt index 4ee1f643d897..dbf45817405f 100644 --- a/Documentation/vm/active_mm.txt +++ b/Documentation/vm/active_mm.txt @@ -74,7 +74,7 @@ we have a user context", and is generally done by the page fault handler and things like that). Anyway, I put a pre-patch-2.3.13-1 on ftp.kernel.org just a moment ago, -because it slightly changes the interfaces to accomodate the alpha (who +because it slightly changes the interfaces to accommodate the alpha (who would have thought it, but the alpha actually ends up having one of the ugliest context switch codes - unlike the other architectures where the MM and register state is separate, the alpha PALcode joins the two, and you diff --git a/Documentation/vm/hugetlbpage.txt b/Documentation/vm/hugetlbpage.txt index 457634c1e03e..f8551b3879f8 100644 --- a/Documentation/vm/hugetlbpage.txt +++ b/Documentation/vm/hugetlbpage.txt @@ -72,7 +72,7 @@ number of huge pages requested. This is the most reliable method of allocating huge pages as memory has not yet become fragmented. Some platforms support multiple huge page sizes. To allocate huge pages -of a specific size, one must preceed the huge pages boot command parameters +of a specific size, one must precede the huge pages boot command parameters with a huge page size selection parameter "hugepagesz=<size>". <size> must be specified in bytes with optional scale suffix [kKmMgG]. The default huge page size may be selected with the "default_hugepagesz=<size>" boot parameter. diff --git a/Documentation/vm/overcommit-accounting b/Documentation/vm/overcommit-accounting index 21c7b1f8f32b..706d7ed9d8d2 100644 --- a/Documentation/vm/overcommit-accounting +++ b/Documentation/vm/overcommit-accounting @@ -4,7 +4,7 @@ The Linux kernel supports the following overcommit handling modes address space are refused. Used for a typical system. It ensures a seriously wild allocation fails while allowing overcommit to reduce swap usage. root is allowed to - allocate slighly more memory in this mode. This is the + allocate slightly more memory in this mode. This is the default. 1 - Always overcommit. Appropriate for some scientific diff --git a/Documentation/vm/page-types.c b/Documentation/vm/page-types.c index cc96ee2666f2..7445caa26d05 100644 --- a/Documentation/vm/page-types.c +++ b/Documentation/vm/page-types.c @@ -32,8 +32,20 @@ #include <sys/types.h> #include <sys/errno.h> #include <sys/fcntl.h> +#include <sys/mount.h> +#include <sys/statfs.h> +#include "../../include/linux/magic.h" +#ifndef MAX_PATH +# define MAX_PATH 256 +#endif + +#ifndef STR +# define _STR(x) #x +# define STR(x) _STR(x) +#endif + /* * pagemap kernel ABI bits */ @@ -152,6 +164,12 @@ static const char *page_flag_names[] = { }; +static const char *debugfs_known_mountpoints[] = { + "/sys/kernel/debug", + "/debug", + 0, +}; + /* * data structures */ @@ -184,7 +202,7 @@ static int kpageflags_fd; static int opt_hwpoison; static int opt_unpoison; -static const char hwpoison_debug_fs[] = "/debug/hwpoison"; +static char hwpoison_debug_fs[MAX_PATH+1]; static int hwpoison_inject_fd; static int hwpoison_forget_fd; @@ -464,21 +482,100 @@ static uint64_t kpageflags_flags(uint64_t flags) return flags; } +/* verify that a mountpoint is actually a debugfs instance */ +static int debugfs_valid_mountpoint(const char *debugfs) +{ + struct statfs st_fs; + + if (statfs(debugfs, &st_fs) < 0) + return -ENOENT; + else if (st_fs.f_type != (long) DEBUGFS_MAGIC) + return -ENOENT; + + return 0; +} + +/* find the path to the mounted debugfs */ +static const char *debugfs_find_mountpoint(void) +{ + const char **ptr; + char type[100]; + FILE *fp; + + ptr = debugfs_known_mountpoints; + while (*ptr) { + if (debugfs_valid_mountpoint(*ptr) == 0) { + strcpy(hwpoison_debug_fs, *ptr); + return hwpoison_debug_fs; + } + ptr++; + } + + /* give up and parse /proc/mounts */ + fp = fopen("/proc/mounts", "r"); + if (fp == NULL) + perror("Can't open /proc/mounts for read"); + + while (fscanf(fp, "%*s %" + STR(MAX_PATH) + "s %99s %*s %*d %*d\n", + hwpoison_debug_fs, type) == 2) { + if (strcmp(type, "debugfs") == 0) + break; + } + fclose(fp); + + if (strcmp(type, "debugfs") != 0) + return NULL; + + return hwpoison_debug_fs; +} + +/* mount the debugfs somewhere if it's not mounted */ + +static void debugfs_mount(void) +{ + const char **ptr; + + /* see if it's already mounted */ + if (debugfs_find_mountpoint()) + return; + + ptr = debugfs_known_mountpoints; + while (*ptr) { + if (mount(NULL, *ptr, "debugfs", 0, NULL) == 0) { + /* save the mountpoint */ + strcpy(hwpoison_debug_fs, *ptr); + break; + } + ptr++; + } + + if (*ptr == NULL) { + perror("mount debugfs"); + exit(EXIT_FAILURE); + } +} + /* * page actions */ static void prepare_hwpoison_fd(void) { - char buf[100]; + char buf[MAX_PATH + 1]; + + debugfs_mount(); if (opt_hwpoison && !hwpoison_inject_fd) { - sprintf(buf, "%s/corrupt-pfn", hwpoison_debug_fs); + snprintf(buf, MAX_PATH, "%s/hwpoison/corrupt-pfn", + hwpoison_debug_fs); hwpoison_inject_fd = checked_open(buf, O_WRONLY); } if (opt_unpoison && !hwpoison_forget_fd) { - sprintf(buf, "%s/unpoison-pfn", hwpoison_debug_fs); + snprintf(buf, MAX_PATH, "%s/hwpoison/unpoison-pfn", + hwpoison_debug_fs); hwpoison_forget_fd = checked_open(buf, O_WRONLY); } } diff --git a/Documentation/w1/slaves/w1_ds2423 b/Documentation/w1/slaves/w1_ds2423 index 90a65d23cf59..3f98b505a0ee 100644 --- a/Documentation/w1/slaves/w1_ds2423 +++ b/Documentation/w1/slaves/w1_ds2423 @@ -21,8 +21,8 @@ value and associated ram buffer is outpputed to own line. Each lines will contain the values of 42 bytes read from the counter and memory page along the crc=YES or NO for indicating whether the read operation -was successfull and CRC matched. -If the operation was successfull, there is also in the end of each line +was successful and CRC matched. +If the operation was successful, there is also in the end of each line a counter value expressed as an integer after c= Meaning of 42 bytes represented is following: @@ -34,7 +34,7 @@ Meaning of 42 bytes represented is following: - crc=YES/NO indicating whether read was ok and crc matched - c=<int> current counter value -example from the successfull read: +example from the successful read: 00 02 00 00 00 00 00 00 00 6d 38 00 ff ff 00 00 fe ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff crc=YES c=2 00 02 00 00 00 00 00 00 00 e0 1f 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff crc=YES c=2 00 29 c6 5d 18 00 00 00 00 04 37 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff crc=YES c=408798761 diff --git a/Documentation/w1/w1.netlink b/Documentation/w1/w1.netlink index 804445f745ed..f59a31965d50 100644 --- a/Documentation/w1/w1.netlink +++ b/Documentation/w1/w1.netlink @@ -81,7 +81,7 @@ which will contain list of all registered master ids in the following format: cn_msg (CN_W1_IDX.CN_W1_VAL as id, len is equal to sizeof(struct - w1_netlink_msg) plus number of masters multipled by 4) + w1_netlink_msg) plus number of masters multiplied by 4) w1_netlink_msg (type: W1_LIST_MASTERS, len is equal to number of masters multiplied by 4 (u32 size)) id0 ... idN diff --git a/Documentation/watchdog/hpwdt.txt b/Documentation/watchdog/hpwdt.txt index 9c24d5ffbb06..9488078900e0 100644 --- a/Documentation/watchdog/hpwdt.txt +++ b/Documentation/watchdog/hpwdt.txt @@ -8,7 +8,7 @@ Last reviewed: 06/02/2009 The HP iLO2 NMI Watchdog driver is a kernel module that provides basic watchdog functionality and the added benefit of NMI sourcing. Both the watchdog functionality and the NMI sourcing capability need to be enabled - by the user. Remember that the two modes are not dependant on one another. + by the user. Remember that the two modes are not dependent on one another. A user can have the NMI sourcing without the watchdog timer and vice-versa. Watchdog functionality is enabled like any other common watchdog driver. That diff --git a/Documentation/workqueue.txt b/Documentation/workqueue.txt index 01c513fac40e..a0b577de918f 100644 --- a/Documentation/workqueue.txt +++ b/Documentation/workqueue.txt @@ -12,6 +12,7 @@ CONTENTS 4. Application Programming Interface (API) 5. Example Execution Scenarios 6. Guidelines +7. Debugging 1. Introduction @@ -379,3 +380,42 @@ If q1 has WQ_CPU_INTENSIVE set, * Unless work items are expected to consume a huge amount of CPU cycles, using a bound wq is usually beneficial due to the increased level of locality in wq operations and work item execution. + + +7. Debugging + +Because the work functions are executed by generic worker threads +there are a few tricks needed to shed some light on misbehaving +workqueue users. + +Worker threads show up in the process list as: + +root 5671 0.0 0.0 0 0 ? S 12:07 0:00 [kworker/0:1] +root 5672 0.0 0.0 0 0 ? S 12:07 0:00 [kworker/1:2] +root 5673 0.0 0.0 0 0 ? S 12:12 0:00 [kworker/0:0] +root 5674 0.0 0.0 0 0 ? S 12:13 0:00 [kworker/1:0] + +If kworkers are going crazy (using too much cpu), there are two types +of possible problems: + + 1. Something beeing scheduled in rapid succession + 2. A single work item that consumes lots of cpu cycles + +The first one can be tracked using tracing: + + $ echo workqueue:workqueue_queue_work > /sys/kernel/debug/tracing/set_event + $ cat /sys/kernel/debug/tracing/trace_pipe > out.txt + (wait a few secs) + ^C + +If something is busy looping on work queueing, it would be dominating +the output and the offender can be determined with the work item +function. + +For the second type of problems it should be possible to just check +the stack trace of the offending worker thread. + + $ cat /proc/THE_OFFENDING_KWORKER/stack + +The work item's function should be trivially visible in the stack +trace. diff --git a/Documentation/x86/x86_64/boot-options.txt b/Documentation/x86/x86_64/boot-options.txt index 48c13b8ab90c..092e596a1301 100644 --- a/Documentation/x86/x86_64/boot-options.txt +++ b/Documentation/x86/x86_64/boot-options.txt @@ -293,11 +293,6 @@ IOMMU (input/output memory management unit) Debugging - oops=panic Always panic on oopses. Default is to just kill the process, - but there is a small probability of deadlocking the machine. - This will also cause panics on machine check exceptions. - Useful together with panic=30 to trigger a reboot. - kstack=N Print N words from the kernel stack in oops dumps. pagefaulttrace Dump all page faults. Only useful for extreme debugging |
