diff options
Diffstat (limited to 'Documentation')
4 files changed, 46 insertions, 18 deletions
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index b301f753ed2c..e77635c5422c 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -43,7 +43,7 @@ SoC Families: - OMAP2 generic - defaults to OMAP2420 compatible = "ti,omap2" -- OMAP3 generic - defaults to OMAP3430 +- OMAP3 generic compatible = "ti,omap3" - OMAP4 generic - defaults to OMAP4430 compatible = "ti,omap4" @@ -51,6 +51,8 @@ SoC Families: compatible = "ti,omap5" - DRA7 generic - defaults to DRA742 compatible = "ti,dra7" +- AM33x generic + compatible = "ti,am33xx" - AM43x generic - defaults to AM4372 compatible = "ti,am43" @@ -63,12 +65,14 @@ SoCs: - OMAP3430 compatible = "ti,omap3430", "ti,omap3" + legacy: "ti,omap34xx" - please do not use any more - AM3517 compatible = "ti,am3517", "ti,omap3" - OMAP3630 - compatible = "ti,omap36xx", "ti,omap3" -- AM33xx - compatible = "ti,am33xx", "ti,omap3" + compatible = "ti,omap3630", "ti,omap3" + legacy: "ti,omap36xx" - please do not use any more +- AM335x + compatible = "ti,am33xx" - OMAP4430 compatible = "ti,omap4430", "ti,omap4" @@ -110,19 +114,19 @@ SoCs: - AM4372 compatible = "ti,am4372", "ti,am43" -Boards: +Boards (incomplete list of examples): - OMAP3 BeagleBoard : Low cost community board - compatible = "ti,omap3-beagle", "ti,omap3" + compatible = "ti,omap3-beagle", "ti,omap3430", "ti,omap3" - OMAP3 Tobi with Overo : Commercial expansion board with daughter board - compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3" + compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3" - OMAP4 SDP : Software Development Board - compatible = "ti,omap4-sdp", "ti,omap4430" + compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4" - OMAP4 PandaBoard : Low cost community board - compatible = "ti,omap4-panda", "ti,omap4430" + compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4" - OMAP4 DuoVero with Parlor : Commercial expansion board with daughter board compatible = "gumstix,omap4-duovero-parlor", "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4"; @@ -134,16 +138,16 @@ Boards: compatible = "variscite,var-dvk-om44", "variscite,var-som-om44", "ti,omap4460", "ti,omap4"; - OMAP3 EVM : Software Development Board for OMAP35x, AM/DM37x - compatible = "ti,omap3-evm", "ti,omap3" + compatible = "ti,omap3-evm", "ti,omap3630", "ti,omap3" - AM335X EVM : Software Development Board for AM335x - compatible = "ti,am335x-evm", "ti,am33xx", "ti,omap3" + compatible = "ti,am335x-evm", "ti,am33xx" - AM335X Bone : Low cost community board - compatible = "ti,am335x-bone", "ti,am33xx", "ti,omap3" + compatible = "ti,am335x-bone", "ti,am33xx" - AM3359 ICEv2 : Low cost Industrial Communication Engine EVM. - compatible = "ti,am3359-icev2", "ti,am33xx", "ti,omap3" + compatible = "ti,am3359-icev2", "ti,am33xx" - AM335X OrionLXm : Substation Automation Platform compatible = "novatech,am335x-lxm", "ti,am33xx" diff --git a/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt index 0c38e4b8fc51..1758051798fe 100644 --- a/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt +++ b/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt @@ -15,12 +15,16 @@ In 'cpus' nodes: In 'operating-points-v2' table: - compatible: Should be - - 'operating-points-v2-ti-cpu' for am335x, am43xx, and dra7xx/am57xx SoCs + - 'operating-points-v2-ti-cpu' for am335x, am43xx, and dra7xx/am57xx, + omap34xx, omap36xx and am3517 SoCs - syscon: A phandle pointing to a syscon node representing the control module register space of the SoC. Optional properties: -------------------- +- "vdd-supply", "vbb-supply": to define two regulators for dra7xx +- "cpu0-supply", "vbb-supply": to define two regulators for omap36xx + For each opp entry in 'operating-points-v2' table: - opp-supported-hw: Two bitfields indicating: 1. Which revision of the SoC the OPP is supported by diff --git a/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt b/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt index 3e36c1d11386..fb46b491791c 100644 --- a/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt +++ b/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt @@ -10,14 +10,23 @@ The Exynos PPMU driver uses the devfreq-event class to provide event data to various devfreq devices. The devfreq devices would use the event data when derterming the current state of each IP. -Required properties: +Required properties for PPMU device: - compatible: Should be "samsung,exynos-ppmu" or "samsung,exynos-ppmu-v2. - reg: physical base address of each PPMU and length of memory mapped region. -Optional properties: +Optional properties for PPMU device: - clock-names : the name of clock used by the PPMU, "ppmu" - clocks : phandles for clock specified in "clock-names" property +Required properties for 'events' child node of PPMU device: +- event-name : the unique event name among PPMU device +Optional properties for 'events' child node of PPMU device: +- event-data-type : Define the type of data which shell be counted +by the counter. You can check include/dt-bindings/pmu/exynos_ppmu.h for +all possible type, i.e. count read requests, count write data in bytes, +etc. This field is optional and when it is missing, the driver code +will use default data type. + Example1 : PPMUv1 nodes in exynos3250.dtsi are listed below. ppmu_dmc0: ppmu_dmc0@106a0000 { @@ -145,3 +154,16 @@ Example3 : PPMUv2 nodes in exynos5433.dtsi are listed below. reg = <0x104d0000 0x2000>; status = "disabled"; }; + +Example4 : 'event-data-type' in exynos4412-ppmu-common.dtsi are listed below. + + &ppmu_dmc0 { + status = "okay"; + events { + ppmu_dmc0_3: ppmu-event3-dmc0 { + event-name = "ppmu-event3-dmc0"; + event-data-type = <(PPMU_RO_DATA_CNT | + PPMU_WO_DATA_CNT)>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt index f8e946471a58..e71f752cc18f 100644 --- a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt +++ b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt @@ -50,8 +50,6 @@ Required properties only for passive bus device: Optional properties only for parent bus device: - exynos,saturation-ratio: the percentage value which is used to calibrate the performance count against total cycle count. -- exynos,voltage-tolerance: the percentage value for bus voltage tolerance - which is used to calculate the max voltage. Detailed correlation between sub-blocks and power line according to Exynos SoC: - In case of Exynos3250, there are two power line as following: |