diff options
Diffstat (limited to 'Documentation')
79 files changed, 2249 insertions, 159 deletions
diff --git a/Documentation/ABI/testing/sysfs-block-rssd b/Documentation/ABI/testing/sysfs-block-rssd index d535757799fe..679ce3543122 100644 --- a/Documentation/ABI/testing/sysfs-block-rssd +++ b/Documentation/ABI/testing/sysfs-block-rssd @@ -6,13 +6,21 @@ Description: This is a read-only file. Dumps below driver information and hardware registers. - S ACTive - Command Issue - - Allocated - Completed - PORT IRQ STAT - HOST IRQ STAT + - Allocated + - Commands in Q What: /sys/block/rssd*/status Date: April 2012 KernelVersion: 3.4 Contact: Asai Thambi S P <asamymuthupa@micron.com> -Description: This is a read-only file. Indicates the status of the device. +Description: This is a read-only file. Indicates the status of the device. + +What: /sys/block/rssd*/flags +Date: May 2012 +KernelVersion: 3.5 +Contact: Asai Thambi S P <asamymuthupa@micron.com> +Description: This is a read-only file. Dumps the flags in port and driver + data structure diff --git a/Documentation/ABI/testing/sysfs-bus-fcoe b/Documentation/ABI/testing/sysfs-bus-fcoe new file mode 100644 index 000000000000..469d09c02f6b --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-fcoe @@ -0,0 +1,77 @@ +What: /sys/bus/fcoe/ctlr_X +Date: March 2012 +KernelVersion: TBD +Contact: Robert Love <robert.w.love@intel.com>, devel@open-fcoe.org +Description: 'FCoE Controller' instances on the fcoe bus +Attributes: + + fcf_dev_loss_tmo: Device loss timeout peroid (see below). Changing + this value will change the dev_loss_tmo for all + FCFs discovered by this controller. + + lesb_link_fail: Link Error Status Block (LESB) link failure count. + + lesb_vlink_fail: Link Error Status Block (LESB) virtual link + failure count. + + lesb_miss_fka: Link Error Status Block (LESB) missed FCoE + Initialization Protocol (FIP) Keep-Alives (FKA). + + lesb_symb_err: Link Error Status Block (LESB) symbolic error count. + + lesb_err_block: Link Error Status Block (LESB) block error count. + + lesb_fcs_error: Link Error Status Block (LESB) Fibre Channel + Serivces error count. + +Notes: ctlr_X (global increment starting at 0) + +What: /sys/bus/fcoe/fcf_X +Date: March 2012 +KernelVersion: TBD +Contact: Robert Love <robert.w.love@intel.com>, devel@open-fcoe.org +Description: 'FCoE FCF' instances on the fcoe bus. A FCF is a Fibre Channel + Forwarder, which is a FCoE switch that can accept FCoE + (Ethernet) packets, unpack them, and forward the embedded + Fibre Channel frames into a FC fabric. It can also take + outbound FC frames and pack them in Ethernet packets to + be sent to their destination on the Ethernet segment. +Attributes: + + fabric_name: Identifies the fabric that the FCF services. + + switch_name: Identifies the FCF. + + priority: The switch's priority amongst other FCFs on the same + fabric. + + selected: 1 indicates that the switch has been selected for use; + 0 indicates that the swich will not be used. + + fc_map: The Fibre Channel MAP + + vfid: The Virtual Fabric ID + + mac: The FCF's MAC address + + fka_peroid: The FIP Keep-Alive peroid + + fabric_state: The internal kernel state + "Unknown" - Initialization value + "Disconnected" - No link to the FCF/fabric + "Connected" - Host is connected to the FCF + "Deleted" - FCF is being removed from the system + + dev_loss_tmo: The device loss timeout peroid for this FCF. + +Notes: A device loss infrastructre similar to the FC Transport's + is present in fcoe_sysfs. It is nice to have so that a + link flapping adapter doesn't continually advance the count + used to identify the discovered FCF. FCFs will exist in a + "Disconnected" state until either the timer expires and the + FCF becomes "Deleted" or the FCF is rediscovered and becomes + "Connected." + + +Users: The first user of this interface will be the fcoeadm application, + which is commonly packaged in the fcoe-utils package. diff --git a/Documentation/ABI/testing/sysfs-bus-i2c-devices-lm3533 b/Documentation/ABI/testing/sysfs-bus-i2c-devices-lm3533 new file mode 100644 index 000000000000..1b62230b33b9 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-i2c-devices-lm3533 @@ -0,0 +1,15 @@ +What: /sys/bus/i2c/devices/.../output_hvled[n] +Date: April 2012 +KernelVersion: 3.5 +Contact: Johan Hovold <jhovold@gmail.com> +Description: + Set the controlling backlight device for high-voltage current + sink HVLED[n] (n = 1, 2) (0, 1). + +What: /sys/bus/i2c/devices/.../output_lvled[n] +Date: April 2012 +KernelVersion: 3.5 +Contact: Johan Hovold <jhovold@gmail.com> +Description: + Set the controlling led device for low-voltage current sink + LVLED[n] (n = 1..5) (0..3). diff --git a/Documentation/ABI/testing/sysfs-bus-rbd b/Documentation/ABI/testing/sysfs-bus-rbd index dbedafb095e2..bcd88eb7ebcd 100644 --- a/Documentation/ABI/testing/sysfs-bus-rbd +++ b/Documentation/ABI/testing/sysfs-bus-rbd @@ -65,11 +65,11 @@ snap_* Entries under /sys/bus/rbd/devices/<dev-id>/snap_<snap-name> ------------------------------------------------------------- -id +snap_id The rados internal snapshot id assigned for this snapshot -size +snap_size The size of the image when this snapshot was taken. diff --git a/Documentation/ABI/testing/sysfs-class-backlight-driver-lm3533 b/Documentation/ABI/testing/sysfs-class-backlight-driver-lm3533 new file mode 100644 index 000000000000..77cf7ac949af --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-backlight-driver-lm3533 @@ -0,0 +1,48 @@ +What: /sys/class/backlight/<backlight>/als_channel +Date: May 2012 +KernelVersion: 3.5 +Contact: Johan Hovold <jhovold@gmail.com> +Description: + Get the ALS output channel used as input in + ALS-current-control mode (0, 1), where + + 0 - out_current0 (backlight 0) + 1 - out_current1 (backlight 1) + +What: /sys/class/backlight/<backlight>/als_en +Date: May 2012 +KernelVersion: 3.5 +Contact: Johan Hovold <jhovold@gmail.com> +Description: + Enable ALS-current-control mode (0, 1). + +What: /sys/class/backlight/<backlight>/id +Date: April 2012 +KernelVersion: 3.5 +Contact: Johan Hovold <jhovold@gmail.com> +Description: + Get the id of this backlight (0, 1). + +What: /sys/class/backlight/<backlight>/linear +Date: April 2012 +KernelVersion: 3.5 +Contact: Johan Hovold <jhovold@gmail.com> +Description: + Set the brightness-mapping mode (0, 1), where + + 0 - exponential mode + 1 - linear mode + +What: /sys/class/backlight/<backlight>/pwm +Date: April 2012 +KernelVersion: 3.5 +Contact: Johan Hovold <jhovold@gmail.com> +Description: + Set the PWM-input control mask (5 bits), where + + bit 5 - PWM-input enabled in Zone 4 + bit 4 - PWM-input enabled in Zone 3 + bit 3 - PWM-input enabled in Zone 2 + bit 2 - PWM-input enabled in Zone 1 + bit 1 - PWM-input enabled in Zone 0 + bit 0 - PWM-input enabled diff --git a/Documentation/ABI/testing/sysfs-class-led-driver-lm3533 b/Documentation/ABI/testing/sysfs-class-led-driver-lm3533 new file mode 100644 index 000000000000..620ebb3b9baa --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-led-driver-lm3533 @@ -0,0 +1,65 @@ +What: /sys/class/leds/<led>/als_channel +Date: May 2012 +KernelVersion: 3.5 +Contact: Johan Hovold <jhovold@gmail.com> +Description: + Set the ALS output channel to use as input in + ALS-current-control mode (1, 2), where + + 1 - out_current1 + 2 - out_current2 + +What: /sys/class/leds/<led>/als_en +Date: May 2012 +KernelVersion: 3.5 +Contact: Johan Hovold <jhovold@gmail.com> +Description: + Enable ALS-current-control mode (0, 1). + +What: /sys/class/leds/<led>/falltime +What: /sys/class/leds/<led>/risetime +Date: April 2012 +KernelVersion: 3.5 +Contact: Johan Hovold <jhovold@gmail.com> +Description: + Set the pattern generator fall and rise times (0..7), where + + 0 - 2048 us + 1 - 262 ms + 2 - 524 ms + 3 - 1.049 s + 4 - 2.097 s + 5 - 4.194 s + 6 - 8.389 s + 7 - 16.78 s + +What: /sys/class/leds/<led>/id +Date: April 2012 +KernelVersion: 3.5 +Contact: Johan Hovold <jhovold@gmail.com> +Description: + Get the id of this led (0..3). + +What: /sys/class/leds/<led>/linear +Date: April 2012 +KernelVersion: 3.5 +Contact: Johan Hovold <jhovold@gmail.com> +Description: + Set the brightness-mapping mode (0, 1), where + + 0 - exponential mode + 1 - linear mode + +What: /sys/class/leds/<led>/pwm +Date: April 2012 +KernelVersion: 3.5 +Contact: Johan Hovold <jhovold@gmail.com> +Description: + Set the PWM-input control mask (5 bits), where + + bit 5 - PWM-input enabled in Zone 4 + bit 4 - PWM-input enabled in Zone 3 + bit 3 - PWM-input enabled in Zone 2 + bit 2 - PWM-input enabled in Zone 1 + bit 1 - PWM-input enabled in Zone 0 + bit 0 - PWM-input enabled diff --git a/Documentation/ABI/testing/sysfs-class-mtd b/Documentation/ABI/testing/sysfs-class-mtd index 4d55a1888981..db1ad7e34fc3 100644 --- a/Documentation/ABI/testing/sysfs-class-mtd +++ b/Documentation/ABI/testing/sysfs-class-mtd @@ -123,3 +123,54 @@ Description: half page, or a quarter page). In the case of ECC NOR, it is the ECC block size. + +What: /sys/class/mtd/mtdX/ecc_strength +Date: April 2012 +KernelVersion: 3.4 +Contact: linux-mtd@lists.infradead.org +Description: + Maximum number of bit errors that the device is capable of + correcting within each region covering an ecc step. This will + always be a non-negative integer. Note that some devices will + have multiple ecc steps within each writesize region. + + In the case of devices lacking any ECC capability, it is 0. + +What: /sys/class/mtd/mtdX/bitflip_threshold +Date: April 2012 +KernelVersion: 3.4 +Contact: linux-mtd@lists.infradead.org +Description: + This allows the user to examine and adjust the criteria by which + mtd returns -EUCLEAN from mtd_read(). If the maximum number of + bit errors that were corrected on any single region comprising + an ecc step (as reported by the driver) equals or exceeds this + value, -EUCLEAN is returned. Otherwise, absent an error, 0 is + returned. Higher layers (e.g., UBI) use this return code as an + indication that an erase block may be degrading and should be + scrutinized as a candidate for being marked as bad. + + The initial value may be specified by the flash device driver. + If not, then the default value is ecc_strength. + + The introduction of this feature brings a subtle change to the + meaning of the -EUCLEAN return code. Previously, it was + interpreted to mean simply "one or more bit errors were + corrected". Its new interpretation can be phrased as "a + dangerously high number of bit errors were corrected on one or + more regions comprising an ecc step". The precise definition of + "dangerously high" can be adjusted by the user with + bitflip_threshold. Users are discouraged from doing this, + however, unless they know what they are doing and have intimate + knowledge of the properties of their device. Broadly speaking, + bitflip_threshold should be low enough to detect genuine erase + block degradation, but high enough to avoid the consequences of + a persistent return value of -EUCLEAN on devices where sticky + bitflips occur. Note that if bitflip_threshold exceeds + ecc_strength, -EUCLEAN is never returned by mtd_read(). + Conversely, if bitflip_threshold is zero, -EUCLEAN is always + returned, absent a hard error. + + This is generally applicable only to NAND flash devices with ECC + capability. It is ignored on devices lacking ECC capability; + i.e., devices for which ecc_strength is zero. diff --git a/Documentation/CodingStyle b/Documentation/CodingStyle index c58b236bbe04..cb9258b8fd35 100644 --- a/Documentation/CodingStyle +++ b/Documentation/CodingStyle @@ -671,8 +671,9 @@ ones already enabled by DEBUG. Chapter 14: Allocating memory The kernel provides the following general purpose memory allocators: -kmalloc(), kzalloc(), kcalloc(), vmalloc(), and vzalloc(). Please refer to -the API documentation for further information about them. +kmalloc(), kzalloc(), kmalloc_array(), kcalloc(), vmalloc(), and +vzalloc(). Please refer to the API documentation for further information +about them. The preferred form for passing a size of a struct is the following: @@ -686,6 +687,17 @@ Casting the return value which is a void pointer is redundant. The conversion from void pointer to any other pointer type is guaranteed by the C programming language. +The preferred form for allocating an array is the following: + + p = kmalloc_array(n, sizeof(...), ...); + +The preferred form for allocating a zeroed array is the following: + + p = kcalloc(n, sizeof(...), ...); + +Both forms check for overflow on the allocation size n * sizeof(...), +and return NULL if that occurred. + Chapter 15: The inline disease diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl index 0c674be0d3c6..e0aedb7a7827 100644 --- a/Documentation/DocBook/mtdnand.tmpl +++ b/Documentation/DocBook/mtdnand.tmpl @@ -1119,8 +1119,6 @@ in this page</entry> These constants are defined in nand.h. They are ored together to describe the chip functionality. <programlisting> -/* Chip can not auto increment pages */ -#define NAND_NO_AUTOINCR 0x00000001 /* Buswitdh is 16 bit */ #define NAND_BUSWIDTH_16 0x00000002 /* Device supports partial programming without padding */ diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index 4468ce24427c..c379a2a6949f 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -150,7 +150,8 @@ be able to justify all violations that remain in your patch. Look through the MAINTAINERS file and the source code, and determine if your change applies to a specific subsystem of the kernel, with -an assigned maintainer. If so, e-mail that person. +an assigned maintainer. If so, e-mail that person. The script +scripts/get_maintainer.pl can be very useful at this step. If no maintainer is listed, or the maintainer does not respond, send your patch to the primary Linux kernel developer's mailing list, diff --git a/Documentation/arm/OMAP/DSS b/Documentation/arm/OMAP/DSS index 888ae7b83ae4..a564ceea9e98 100644 --- a/Documentation/arm/OMAP/DSS +++ b/Documentation/arm/OMAP/DSS @@ -47,6 +47,51 @@ flexible way to enable non-common multi-display configuration. In addition to modelling the hardware overlays, omapdss supports virtual overlays and overlay managers. These can be used when updating a display with CPU or system DMA. +omapdss driver support for audio +-------------------------------- +There exist several display technologies and standards that support audio as +well. Hence, it is relevant to update the DSS device driver to provide an audio +interface that may be used by an audio driver or any other driver interested in +the functionality. + +The audio_enable function is intended to prepare the relevant +IP for playback (e.g., enabling an audio FIFO, taking in/out of reset +some IP, enabling companion chips, etc). It is intended to be called before +audio_start. The audio_disable function performs the reverse operation and is +intended to be called after audio_stop. + +While a given DSS device driver may support audio, it is possible that for +certain configurations audio is not supported (e.g., an HDMI display using a +VESA video timing). The audio_supported function is intended to query whether +the current configuration of the display supports audio. + +The audio_config function is intended to configure all the relevant audio +parameters of the display. In order to make the function independent of any +specific DSS device driver, a struct omap_dss_audio is defined. Its purpose +is to contain all the required parameters for audio configuration. At the +moment, such structure contains pointers to IEC-60958 channel status word +and CEA-861 audio infoframe structures. This should be enough to support +HDMI and DisplayPort, as both are based on CEA-861 and IEC-60958. + +The audio_enable/disable, audio_config and audio_supported functions could be +implemented as functions that may sleep. Hence, they should not be called +while holding a spinlock or a readlock. + +The audio_start/audio_stop function is intended to effectively start/stop audio +playback after the configuration has taken place. These functions are designed +to be used in an atomic context. Hence, audio_start should return quickly and be +called only after all the needed resources for audio playback (audio FIFOs, +DMA channels, companion chips, etc) have been enabled to begin data transfers. +audio_stop is designed to only stop the audio transfers. The resources used +for playback are released using audio_disable. + +The enum omap_dss_audio_state may be used to help the implementations of +the interface to keep track of the audio state. The initial state is _DISABLED; +then, the state transitions to _CONFIGURED, and then, when it is ready to +play audio, to _ENABLED. The state _PLAYING is used when the audio is being +rendered. + + Panel and controller drivers ---------------------------- @@ -156,6 +201,7 @@ timings Display timings (pixclock,xres/hfp/hbp/hsw,yres/vfp/vbp/vsw) "pal" and "ntsc" panel_name tear_elim Tearing elimination 0=off, 1=on +output_type Output type (video encoder only): "composite" or "svideo" There are also some debugfs files at <debugfs>/omapdss/ which show information about clocks and registers. diff --git a/Documentation/arm/SPEAr/overview.txt b/Documentation/arm/SPEAr/overview.txt index 28a9af953b9d..57aae7765c74 100644 --- a/Documentation/arm/SPEAr/overview.txt +++ b/Documentation/arm/SPEAr/overview.txt @@ -8,9 +8,8 @@ Introduction weblink : http://www.st.com/spear The ST Microelectronics SPEAr range of ARM9/CortexA9 System-on-Chip CPUs are - supported by the 'spear' platform of ARM Linux. Currently SPEAr300, - SPEAr310, SPEAr320 and SPEAr600 SOCs are supported. Support for the SPEAr13XX - series is in progress. + supported by the 'spear' platform of ARM Linux. Currently SPEAr1310, + SPEAr1340, SPEAr300, SPEAr310, SPEAr320 and SPEAr600 SOCs are supported. Hierarchy in SPEAr is as follows: @@ -26,33 +25,36 @@ Introduction - SPEAr600 (SOC) - SPEAr600 Evaluation Board - SPEAr13XX (13XX SOC series, based on ARM CORTEXA9) - - SPEAr1300 (SOC) + - SPEAr1310 (SOC) + - SPEAr1310 Evaluation Board + - SPEAr1340 (SOC) + - SPEAr1340 Evaluation Board Configuration ------------- A generic configuration is provided for each machine, and can be used as the default by - make spear600_defconfig - make spear300_defconfig - make spear310_defconfig - make spear320_defconfig + make spear13xx_defconfig + make spear3xx_defconfig + make spear6xx_defconfig Layout ------ - The common files for multiple machine families (SPEAr3XX, SPEAr6XX and - SPEAr13XX) are located in the platform code contained in arch/arm/plat-spear + The common files for multiple machine families (SPEAr3xx, SPEAr6xx and + SPEAr13xx) are located in the platform code contained in arch/arm/plat-spear with headers in plat/. Each machine series have a directory with name arch/arm/mach-spear followed by series name. Like mach-spear3xx, mach-spear6xx and mach-spear13xx. - Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c and for - spear6xx is mach-spear6xx/spear6xx.c. mach-spear* also contain soc/machine - specific files, like spear300.c, spear310.c, spear320.c and spear600.c. - mach-spear* doesn't contains board specific files as they fully support - Flattened Device Tree. + Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c, for + spear6xx is mach-spear6xx/spear6xx.c and for spear13xx family is + mach-spear13xx/spear13xx.c. mach-spear* also contain soc/machine specific + files, like spear1310.c, spear1340.c spear300.c, spear310.c, spear320.c and + spear600.c. mach-spear* doesn't contains board specific files as they fully + support Flattened Device Tree. Document Author diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt index 9b1067afb224..dd88540bb995 100644 --- a/Documentation/cgroups/memory.txt +++ b/Documentation/cgroups/memory.txt @@ -184,12 +184,14 @@ behind this approach is that a cgroup that aggressively uses a shared page will eventually get charged for it (once it is uncharged from the cgroup that brought it in -- this will happen on memory pressure). +But see section 8.2: when moving a task to another cgroup, its pages may +be recharged to the new cgroup, if move_charge_at_immigrate has been chosen. + Exception: If CONFIG_CGROUP_CGROUP_MEM_RES_CTLR_SWAP is not used. When you do swapoff and make swapped-out pages of shmem(tmpfs) to be backed into memory in force, charges for pages are accounted against the caller of swapoff rather than the users of shmem. - 2.4 Swap Extension (CONFIG_CGROUP_MEM_RES_CTLR_SWAP) Swap Extension allows you to record charge for swap. A swapped-in page is @@ -374,14 +376,15 @@ cgroup might have some charge associated with it, even though all tasks have migrated away from it. (because we charge against pages, not against tasks.) -Such charges are freed or moved to their parent. At moving, both of RSS -and CACHES are moved to parent. -rmdir() may return -EBUSY if freeing/moving fails. See 5.1 also. +We move the stats to root (if use_hierarchy==0) or parent (if +use_hierarchy==1), and no change on the charge except uncharging +from the child. Charges recorded in swap information is not updated at removal of cgroup. Recorded information is discarded and a cgroup which uses swap (swapcache) will be charged as a new owner of it. +About use_hierarchy, see Section 6. 5. Misc. interfaces. @@ -394,13 +397,15 @@ will be charged as a new owner of it. Almost all pages tracked by this memory cgroup will be unmapped and freed. Some pages cannot be freed because they are locked or in-use. Such pages are - moved to parent and this cgroup will be empty. This may return -EBUSY if - VM is too busy to free/move all pages immediately. + moved to parent(if use_hierarchy==1) or root (if use_hierarchy==0) and this + cgroup will be empty. Typical use case of this interface is that calling this before rmdir(). Because rmdir() moves all pages to parent, some out-of-use page caches can be moved to the parent. If you want to avoid that, force_empty will be useful. + About use_hierarchy, see Section 6. + 5.2 stat file memory.stat file includes following statistics @@ -430,17 +435,10 @@ hierarchical_memory_limit - # of bytes of memory limit with regard to hierarchy hierarchical_memsw_limit - # of bytes of memory+swap limit with regard to hierarchy under which memory cgroup is. -total_cache - sum of all children's "cache" -total_rss - sum of all children's "rss" -total_mapped_file - sum of all children's "cache" -total_pgpgin - sum of all children's "pgpgin" -total_pgpgout - sum of all children's "pgpgout" -total_swap - sum of all children's "swap" -total_inactive_anon - sum of all children's "inactive_anon" -total_active_anon - sum of all children's "active_anon" -total_inactive_file - sum of all children's "inactive_file" -total_active_file - sum of all children's "active_file" -total_unevictable - sum of all children's "unevictable" +total_<counter> - # hierarchical version of <counter>, which in + addition to the cgroup's own value includes the + sum of all hierarchical children's values of + <counter>, i.e. total_cache # The following additional stats are dependent on CONFIG_DEBUG_VM. @@ -622,8 +620,7 @@ memory cgroup. bit | what type of charges would be moved ? -----+------------------------------------------------------------------------ 0 | A charge of an anonymous page(or swap of it) used by the target task. - | Those pages and swaps must be used only by the target task. You must - | enable Swap Extension(see 2.4) to enable move of swap charges. + | You must enable Swap Extension(see 2.4) to enable move of swap charges. -----+------------------------------------------------------------------------ 1 | A charge of file pages(normal file, tmpfs file(e.g. ipc shared memory) | and swaps of tmpfs file) mmapped by the target task. Unlike the case of @@ -636,8 +633,6 @@ memory cgroup. 8.3 TODO -- Implement madvise(2) to let users decide the vma to be moved or not to be - moved. - All of moving charge operations are done under cgroup_mutex. It's not good behavior to hold the mutex too long, so we may need some trick. diff --git a/Documentation/cgroups/resource_counter.txt b/Documentation/cgroups/resource_counter.txt index f3c4ec3626a2..0c4a344e78fa 100644 --- a/Documentation/cgroups/resource_counter.txt +++ b/Documentation/cgroups/resource_counter.txt @@ -92,6 +92,14 @@ to work with it. The _locked routines imply that the res_counter->lock is taken. + f. void res_counter_uncharge_until + (struct res_counter *rc, struct res_counter *top, + unsinged long val) + + Almost same as res_cunter_uncharge() but propagation of uncharge + stops when rc == top. This is useful when kill a res_coutner in + child cgroup. + 2.1 Other accounting routines There are more routines that may help you with common needs, like diff --git a/Documentation/cris/README b/Documentation/cris/README index d9b086869a60..8dbdb1a44429 100644 --- a/Documentation/cris/README +++ b/Documentation/cris/README @@ -1,38 +1,34 @@ -Linux 2.4 on the CRIS architecture -================================== -$Id: README,v 1.7 2001/04/19 12:38:32 bjornw Exp $ +Linux on the CRIS architecture +============================== -This is a port of Linux 2.4 to Axis Communications ETRAX 100LX embedded -network CPU. For more information about CRIS and ETRAX please see further -below. +This is a port of Linux to Axis Communications ETRAX 100LX, +ETRAX FS and ARTPEC-3 embedded network CPUs. + +For more information about CRIS and ETRAX please see further below. In order to compile this you need a version of gcc with support for the -ETRAX chip family. Please see this link for more information on how to +ETRAX chip family. Please see this link for more information on how to download the compiler and other tools useful when building and booting software for the ETRAX platform: -http://developer.axis.com/doc/software/devboard_lx/install-howto.html - -<more specific information should come in this document later> +http://developer.axis.com/wiki/doku.php?id=axis:install-howto-2_20 What is CRIS ? -------------- CRIS is an acronym for 'Code Reduced Instruction Set'. It is the CPU architecture in Axis Communication AB's range of embedded network CPU's, -called ETRAX. The latest CPU is called ETRAX 100LX, where LX stands for -'Linux' because the chip was designed to be a good host for the Linux -operating system. +called ETRAX. The ETRAX 100LX chip -------------------- -For reference, please see the press-release: +For reference, please see the following link: -http://www.axis.com/news/us/001101_etrax.htm +http://www.axis.com/products/dev_etrax_100lx/index.htm -The ETRAX 100LX is a 100 MIPS processor with 8kB cache, MMU, and a very broad -range of built-in interfaces, all with modern scatter/gather DMA. +The ETRAX 100LX is a 100 MIPS processor with 8kB cache, MMU, and a very broad +range of built-in interfaces, all with modern scatter/gather DMA. Memory interfaces: @@ -51,20 +47,28 @@ I/O interfaces: * SCSI * two parallel-ports * two generic 8-bit ports - - (not all interfaces are available at the same time due to chip pin + + (not all interfaces are available at the same time due to chip pin multiplexing) -The previous version of the ETRAX, the ETRAX 100, sits in almost all of -Axis shipping thin-servers like the Axis 2100 web camera or the ETRAX 100 -developer-board. It lacks an MMU so the Linux we run on that is a version -of uClinux (Linux 2.0 without MM-support) ported to the CRIS architecture. -The new Linux 2.4 port has full MM and needs a CPU with an MMU, so it will -not run on the ETRAX 100. +ETRAX 100LX is CRISv10 architecture. + + +The ETRAX FS and ARTPEC-3 chips +------------------------------- -A version of the Axis developer-board with ETRAX 100LX (running Linux -2.4) is now available. For more information please see developer.axis.com. +The ETRAX FS is a 200MHz 32-bit RISC processor with on-chip 16kB +I-cache and 16kB D-cache and with a wide range of device interfaces +including multiple high speed serial ports and an integrated USB 1.1 PHY. +The ARTPEC-3 is a variant of the ETRAX FS with additional IO-units +used by the Axis Communications network cameras. + +See below link for more information: + +http://www.axis.com/products/dev_etrax_fs/index.htm + +ETRAX FS and ARTPEC-3 are both CRISv32 architectures. Bootlog ------- @@ -182,10 +186,6 @@ SwapFree: 0 kB -rwxr-xr-x 1 342 100 16252 Jan 01 00:00 telnetd -(All programs are statically linked to the libc at this point - we have not ported the - shared libraries yet) - - diff --git a/Documentation/device-mapper/thin-provisioning.txt b/Documentation/device-mapper/thin-provisioning.txt index 3370bc4d7b98..f5cfc62b7ad3 100644 --- a/Documentation/device-mapper/thin-provisioning.txt +++ b/Documentation/device-mapper/thin-provisioning.txt @@ -287,6 +287,17 @@ iii) Messages the current transaction id is when you change it with this compare-and-swap message. + reserve_metadata_snap + + Reserve a copy of the data mapping btree for use by userland. + This allows userland to inspect the mappings as they were when + this message was executed. Use the pool's status command to + get the root block associated with the metadata snapshot. + + release_metadata_snap + + Release a previously reserved copy of the data mapping btree. + 'thin' target ------------- diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt index bfbc771a65f8..ac9e7516756e 100644 --- a/Documentation/devicetree/bindings/arm/fsl.txt +++ b/Documentation/devicetree/bindings/arm/fsl.txt @@ -1,6 +1,14 @@ Freescale i.MX Platforms Device Tree Bindings ----------------------------------------------- +i.MX23 Evaluation Kit +Required root node properties: + - compatible = "fsl,imx23-evk", "fsl,imx23"; + +i.MX28 Evaluation Kit +Required root node properties: + - compatible = "fsl,imx28-evk", "fsl,imx28"; + i.MX51 Babbage Board Required root node properties: - compatible = "fsl,imx51-babbage", "fsl,imx51"; @@ -29,6 +37,10 @@ i.MX6 Quad SABRE Lite Board Required root node properties: - compatible = "fsl,imx6q-sabrelite", "fsl,imx6q"; +i.MX6 Quad SABRE Smart Device Board +Required root node properties: + - compatible = "fsl,imx6q-sabresd", "fsl,imx6q"; + Generic i.MX boards ------------------- diff --git a/Documentation/devicetree/bindings/arm/samsung/interrupt-combiner.txt b/Documentation/devicetree/bindings/arm/samsung/interrupt-combiner.txt new file mode 100644 index 000000000000..f2f2171e530e --- /dev/null +++ b/Documentation/devicetree/bindings/arm/samsung/interrupt-combiner.txt @@ -0,0 +1,52 @@ +* Samsung Exynos Interrupt Combiner Controller + +Samsung's Exynos4 architecture includes a interrupt combiner controller which +can combine interrupt sources as a group and provide a single interrupt request +for the group. The interrupt request from each group are connected to a parent +interrupt controller, such as GIC in case of Exynos4210. + +The interrupt combiner controller consists of multiple combiners. Upto eight +interrupt sources can be connected to a combiner. The combiner outputs one +combined interrupt for its eight interrupt sources. The combined interrupt +is usually connected to a parent interrupt controller. + +A single node in the device tree is used to describe the interrupt combiner +controller module (which includes multiple combiners). A combiner in the +interrupt controller module shares config/control registers with other +combiners. For example, a 32-bit interrupt enable/disable config register +can accommodate upto 4 interrupt combiners (with each combiner supporting +upto 8 interrupt sources). + +Required properties: +- compatible: should be "samsung,exynos4210-combiner". +- interrupt-controller: Identifies the node as an interrupt controller. +- #interrupt-cells: should be <2>. The meaning of the cells are + * First Cell: Combiner Group Number. + * Second Cell: Interrupt number within the group. +- reg: Base address and size of interrupt combiner registers. +- interrupts: The list of interrupts generated by the combiners which are then + connected to a parent interrupt controller. The format of the interrupt + specifier depends in the interrupt parent controller. + +Optional properties: +- samsung,combiner-nr: The number of interrupt combiners supported. If this + property is not specified, the default number of combiners is assumed + to be 16. +- interrupt-parent: pHandle of the parent interrupt controller, if not + inherited from the parent node. + + +Example: + + The following is a an example from the Exynos4210 SoC dtsi file. + + combiner:interrupt-controller@10440000 { + compatible = "samsung,exynos4210-combiner"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x10440000 0x1000>; + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, + <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>; + }; diff --git a/Documentation/devicetree/bindings/arm/spear-timer.txt b/Documentation/devicetree/bindings/arm/spear-timer.txt new file mode 100644 index 000000000000..c0017221cf55 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/spear-timer.txt @@ -0,0 +1,18 @@ +* SPEAr ARM Timer + +** Timer node required properties: + +- compatible : Should be: + "st,spear-timer" +- reg: Address range of the timer registers +- interrupt-parent: Should be the phandle for the interrupt controller + that services interrupts for this device +- interrupt: Should contain the timer interrupt number + +Example: + + timer@f0000000 { + compatible = "st,spear-timer"; + reg = <0xf0000000 0x400>; + interrupts = <2>; + }; diff --git a/Documentation/devicetree/bindings/arm/spear.txt b/Documentation/devicetree/bindings/arm/spear.txt index aa5f355cc947..0d42949df6c2 100644 --- a/Documentation/devicetree/bindings/arm/spear.txt +++ b/Documentation/devicetree/bindings/arm/spear.txt @@ -2,25 +2,25 @@ ST SPEAr Platforms Device Tree Bindings --------------------------------------- Boards with the ST SPEAr600 SoC shall have the following properties: - Required root node property: - compatible = "st,spear600"; Boards with the ST SPEAr300 SoC shall have the following properties: - Required root node property: - compatible = "st,spear300"; Boards with the ST SPEAr310 SoC shall have the following properties: - Required root node property: - compatible = "st,spear310"; Boards with the ST SPEAr320 SoC shall have the following properties: +Required root node property: +compatible = "st,spear320"; +Boards with the ST SPEAr1310 SoC shall have the following properties: Required root node property: +compatible = "st,spear1310"; -compatible = "st,spear320"; +Boards with the ST SPEAr1340 SoC shall have the following properties: +Required root node property: +compatible = "st,spear1340"; diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt new file mode 100644 index 000000000000..234406d41c12 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt @@ -0,0 +1,11 @@ +NVIDIA Tegra AHB + +Required properties: +- compatible : "nvidia,tegra20-ahb" or "nvidia,tegra30-ahb" +- reg : Should contain 1 register ranges(address and length) + +Example: + ahb: ahb@6000c004 { + compatible = "nvidia,tegra20-ahb"; + reg = <0x6000c004 0x10c>; /* AHB Arbitration + Gizmo Controller */ + }; diff --git a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt new file mode 100644 index 000000000000..ded0398d3bdc --- /dev/null +++ b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt @@ -0,0 +1,19 @@ +* Freescale MXS DMA + +Required properties: +- compatible : Should be "fsl,<chip>-dma-apbh" or "fsl,<chip>-dma-apbx" +- reg : Should contain registers location and length + +Supported chips: +imx23, imx28. + +Examples: +dma-apbh@80004000 { + compatible = "fsl,imx28-dma-apbh"; + reg = <0x80004000 2000>; +}; + +dma-apbx@80024000 { + compatible = "fsl,imx28-dma-apbx"; + reg = <0x80024000 2000>; +}; diff --git a/Documentation/devicetree/bindings/dma/snps-dma.txt b/Documentation/devicetree/bindings/dma/snps-dma.txt new file mode 100644 index 000000000000..c0d85dbcada5 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/snps-dma.txt @@ -0,0 +1,17 @@ +* Synopsys Designware DMA Controller + +Required properties: +- compatible: "snps,dma-spear1340" +- reg: Address range of the DMAC registers +- interrupt-parent: Should be the phandle for the interrupt controller + that services interrupts for this device +- interrupt: Should contain the DMAC interrupt number + +Example: + + dma@fc000000 { + compatible = "snps,dma-spear1340"; + reg = <0xfc000000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <12>; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-mm-lantiq.txt b/Documentation/devicetree/bindings/gpio/gpio-mm-lantiq.txt new file mode 100644 index 000000000000..f93d51478d5a --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-mm-lantiq.txt @@ -0,0 +1,38 @@ +Lantiq SoC External Bus memory mapped GPIO controller + +By attaching hardware latches to the EBU it is possible to create output +only gpios. This driver configures a special memory address, which when +written to outputs 16 bit to the latches. + +The node describing the memory mapped GPIOs needs to be a child of the node +describing the "lantiq,localbus". + +Required properties: +- compatible : Should be "lantiq,gpio-mm-lantiq" +- reg : Address and length of the register set for the device +- #gpio-cells : Should be two. The first cell is the pin number and + the second cell is used to specify optional parameters (currently + unused). +- gpio-controller : Marks the device node as a gpio controller. + +Optional properties: +- lantiq,shadow : The default value that we shall assume as already set on the + shift register cascade. + +Example: + +localbus@0 { + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x0 0x3ffffff /* addrsel0 */ + 1 0 0x4000000 0x4000010>; /* addsel1 */ + compatible = "lantiq,localbus", "simple-bus"; + + gpio_mm0: gpio@4000000 { + compatible = "lantiq,gpio-mm"; + reg = <1 0x0 0x10>; + gpio-controller; + #gpio-cells = <2>; + lantiq,shadow = <0x77f> + }; +} diff --git a/Documentation/devicetree/bindings/gpio/gpio-mxs.txt b/Documentation/devicetree/bindings/gpio/gpio-mxs.txt new file mode 100644 index 000000000000..0c35673f7a3e --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-mxs.txt @@ -0,0 +1,87 @@ +* Freescale MXS GPIO controller + +The Freescale MXS GPIO controller is part of MXS PIN controller. The +GPIOs are organized in port/bank. Each port consists of 32 GPIOs. + +As the GPIO controller is embedded in the PIN controller and all the +GPIO ports share the same IO space with PIN controller, the GPIO node +will be represented as sub-nodes of MXS pinctrl node. + +Required properties for GPIO node: +- compatible : Should be "fsl,<soc>-gpio". The supported SoCs include + imx23 and imx28. +- interrupts : Should be the port interrupt shared by all 32 pins. +- gpio-controller : Marks the device node as a gpio controller. +- #gpio-cells : Should be two. The first cell is the pin number and + the second cell is used to specify optional parameters (currently + unused). +- interrupt-controller: Marks the device node as an interrupt controller. +- #interrupt-cells : Should be 2. The first cell is the GPIO number. + The second cell bits[3:0] is used to specify trigger type and level flags: + 1 = low-to-high edge triggered. + 2 = high-to-low edge triggered. + 4 = active high level-sensitive. + 8 = active low level-sensitive. + +Note: Each GPIO port should have an alias correctly numbered in "aliases" +node. + +Examples: + +aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; + gpio4 = &gpio4; +}; + +pinctrl@80018000 { + compatible = "fsl,imx28-pinctrl", "simple-bus"; + reg = <0x80018000 2000>; + + gpio0: gpio@0 { + compatible = "fsl,imx28-gpio"; + interrupts = <127>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@1 { + compatible = "fsl,imx28-gpio"; + interrupts = <126>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@2 { + compatible = "fsl,imx28-gpio"; + interrupts = <125>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@3 { + compatible = "fsl,imx28-gpio"; + interrupts = <124>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@4 { + compatible = "fsl,imx28-gpio"; + interrupts = <123>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; +}; diff --git a/Documentation/devicetree/bindings/gpio/gpio-stp-xway.txt b/Documentation/devicetree/bindings/gpio/gpio-stp-xway.txt new file mode 100644 index 000000000000..854de130a971 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-stp-xway.txt @@ -0,0 +1,42 @@ +Lantiq SoC Serial To Parallel (STP) GPIO controller + +The Serial To Parallel (STP) is found on MIPS based Lantiq socs. It is a +peripheral controller used to drive external shift register cascades. At most +3 groups of 8 bits can be driven. The hardware is able to allow the DSL modem +to drive the 2 LSBs of the cascade automatically. + + +Required properties: +- compatible : Should be "lantiq,gpio-stp-xway" +- reg : Address and length of the register set for the device +- #gpio-cells : Should be two. The first cell is the pin number and + the second cell is used to specify optional parameters (currently + unused). +- gpio-controller : Marks the device node as a gpio controller. + +Optional properties: +- lantiq,shadow : The default value that we shall assume as already set on the + shift register cascade. +- lantiq,groups : Set the 3 bit mask to select which of the 3 groups are enabled + in the shift register cascade. +- lantiq,dsl : The dsl core can control the 2 LSBs of the gpio cascade. This 2 bit + property can enable this feature. +- lantiq,phy1 : The gphy1 core can control 3 bits of the gpio cascade. +- lantiq,phy2 : The gphy2 core can control 3 bits of the gpio cascade. +- lantiq,rising : use rising instead of falling edge for the shift register + +Example: + +gpio1: stp@E100BB0 { + compatible = "lantiq,gpio-stp-xway"; + reg = <0xE100BB0 0x40>; + #gpio-cells = <2>; + gpio-controller; + + lantiq,shadow = <0xffff>; + lantiq,groups = <0x7>; + lantiq,dsl = <0x3>; + lantiq,phy1 = <0x7>; + lantiq,phy2 = <0x7>; + /* lantiq,rising; */ +}; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mxs.txt b/Documentation/devicetree/bindings/i2c/i2c-mxs.txt new file mode 100644 index 000000000000..1bfc02de1b0c --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-mxs.txt @@ -0,0 +1,16 @@ +* Freescale MXS Inter IC (I2C) Controller + +Required properties: +- compatible: Should be "fsl,<chip>-i2c" +- reg: Should contain registers location and length +- interrupts: Should contain ERROR and DMA interrupts + +Examples: + +i2c0: i2c@80058000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-i2c"; + reg = <0x80058000 2000>; + interrupts = <111 68>; +}; diff --git a/Documentation/devicetree/bindings/i2c/mux.txt b/Documentation/devicetree/bindings/i2c/mux.txt new file mode 100644 index 000000000000..af84cce5cd7b --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/mux.txt @@ -0,0 +1,60 @@ +Common i2c bus multiplexer/switch properties. + +An i2c bus multiplexer/switch will have several child busses that are +numbered uniquely in a device dependent manner. The nodes for an i2c bus +multiplexer/switch will have one child node for each child +bus. + +Required properties: +- #address-cells = <1>; +- #size-cells = <0>; + +Required properties for child nodes: +- #address-cells = <1>; +- #size-cells = <0>; +- reg : The sub-bus number. + +Optional properties for child nodes: +- Other properties specific to the multiplexer/switch hardware. +- Child nodes conforming to i2c bus binding + + +Example : + + /* + An NXP pca9548 8 channel I2C multiplexer at address 0x70 + with two NXP pca8574 GPIO expanders attached, one each to + ports 3 and 4. + */ + + mux@70 { + compatible = "nxp,pca9548"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + gpio1: gpio@38 { + compatible = "nxp,pca8574"; + reg = <0x38>; + #gpio-cells = <2>; + gpio-controller; + }; + }; + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + gpio2: gpio@38 { + compatible = "nxp,pca8574"; + reg = <0x38>; + #gpio-cells = <2>; + gpio-controller; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/samsung-i2c.txt b/Documentation/devicetree/bindings/i2c/samsung-i2c.txt index 38832c712919..b6cb5a12c672 100644 --- a/Documentation/devicetree/bindings/i2c/samsung-i2c.txt +++ b/Documentation/devicetree/bindings/i2c/samsung-i2c.txt @@ -6,14 +6,18 @@ Required properties: - compatible: value should be either of the following. (a) "samsung, s3c2410-i2c", for i2c compatible with s3c2410 i2c. (b) "samsung, s3c2440-i2c", for i2c compatible with s3c2440 i2c. + (c) "samsung, s3c2440-hdmiphy-i2c", for s3c2440-like i2c used + inside HDMIPHY block found on several samsung SoCs - reg: physical base address of the controller and length of memory mapped region. - interrupts: interrupt number to the cpu. - samsung,i2c-sda-delay: Delay (in ns) applied to data line (SDA) edges. - - gpios: The order of the gpios should be the following: <SDA, SCL>. - The gpio specifier depends on the gpio controller. Optional properties: + - gpios: The order of the gpios should be the following: <SDA, SCL>. + The gpio specifier depends on the gpio controller. Required in all + cases except for "samsung,s3c2440-hdmiphy-i2c" whose input/output + lines are permanently wired to the respective client - samsung,i2c-slave-addr: Slave address in multi-master enviroment. If not specified, default value is 0. - samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not diff --git a/Documentation/devicetree/bindings/i2c/xiic.txt b/Documentation/devicetree/bindings/i2c/xiic.txt new file mode 100644 index 000000000000..ceabbe91ae44 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/xiic.txt @@ -0,0 +1,22 @@ +Xilinx IIC controller: + +Required properties: +- compatible : Must be "xlnx,xps-iic-2.00.a" +- reg : IIC register location and length +- interrupts : IIC controller unterrupt +- #address-cells = <1> +- #size-cells = <0> + +Optional properties: +- Child nodes conforming to i2c bus binding + +Example: + + axi_iic_0: i2c@40800000 { + compatible = "xlnx,xps-iic-2.00.a"; + interrupts = < 1 2 >; + reg = < 0x40800000 0x10000 >; + + #size-cells = <0>; + #address-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/iommu/nvidia,tegra20-gart.txt b/Documentation/devicetree/bindings/iommu/nvidia,tegra20-gart.txt new file mode 100644 index 000000000000..099d9362ebc1 --- /dev/null +++ b/Documentation/devicetree/bindings/iommu/nvidia,tegra20-gart.txt @@ -0,0 +1,14 @@ +NVIDIA Tegra 20 GART + +Required properties: +- compatible: "nvidia,tegra20-gart" +- reg: Two pairs of cells specifying the physical address and size of + the memory controller registers and the GART aperture respectively. + +Example: + + gart { + compatible = "nvidia,tegra20-gart"; + reg = <0x7000f024 0x00000018 /* controller registers */ + 0x58000000 0x02000000>; /* GART aperture */ + }; diff --git a/Documentation/devicetree/bindings/mfd/da9052-i2c.txt b/Documentation/devicetree/bindings/mfd/da9052-i2c.txt new file mode 100644 index 000000000000..1857f4a6b9a9 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/da9052-i2c.txt @@ -0,0 +1,60 @@ +* Dialog DA9052/53 Power Management Integrated Circuit (PMIC) + +Required properties: +- compatible : Should be "dlg,da9052", "dlg,da9053-aa", + "dlg,da9053-ab", or "dlg,da9053-bb" + +Sub-nodes: +- regulators : Contain the regulator nodes. The DA9052/53 regulators are + bound using their names as listed below: + + buck0 : regulator BUCK0 + buck1 : regulator BUCK1 + buck2 : regulator BUCK2 + buck3 : regulator BUCK3 + ldo4 : regulator LDO4 + ldo5 : regulator LDO5 + ldo6 : regulator LDO6 + ldo7 : regulator LDO7 + ldo8 : regulator LDO8 + ldo9 : regulator LDO9 + ldo10 : regulator LDO10 + ldo11 : regulator LDO11 + ldo12 : regulator LDO12 + ldo13 : regulator LDO13 + + The bindings details of individual regulator device can be found in: + Documentation/devicetree/bindings/regulator/regulator.txt + +Examples: + +i2c@63fc8000 { /* I2C1 */ + status = "okay"; + + pmic: dialog@48 { + compatible = "dlg,da9053-aa"; + reg = <0x48>; + + regulators { + buck0 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2075000>; + }; + + buck1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2075000>; + }; + + buck2 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <2500000>; + }; + + buck3 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <2500000>; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/tps65910.txt b/Documentation/devicetree/bindings/mfd/tps65910.txt new file mode 100644 index 000000000000..645f5eaadb3f --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/tps65910.txt @@ -0,0 +1,133 @@ +TPS65910 Power Management Integrated Circuit + +Required properties: +- compatible: "ti,tps65910" or "ti,tps65911" +- reg: I2C slave address +- interrupts: the interrupt outputs of the controller +- #gpio-cells: number of cells to describe a GPIO, this should be 2. + The first cell is the GPIO number. + The second cell is used to specify additional options <unused>. +- gpio-controller: mark the device as a GPIO controller +- #interrupt-cells: the number of cells to describe an IRQ, this should be 2. + The first cell is the IRQ number. + The second cell is the flags, encoded as the trigger masks from + Documentation/devicetree/bindings/interrupts.txt +- regulators: This is the list of child nodes that specify the regulator + initialization data for defined regulators. Not all regulators for the given + device need to be present. The definition for each of these nodes is defined + using the standard binding for regulators found at + Documentation/devicetree/bindings/regulator/regulator.txt. + + The valid names for regulators are: + tps65910: vrtc, vio, vdd1, vdd2, vdd3, vdig1, vdig2, vpll, vdac, vaux1, + vaux2, vaux33, vmmc + tps65911: vrtc, vio, vdd1, vdd3, vddctrl, ldo1, ldo2, ldo3, ldo4, ldo5, + ldo6, ldo7, ldo8 + +Optional properties: +- ti,vmbch-threshold: (tps65911) main battery charged threshold + comparator. (see VMBCH_VSEL in TPS65910 datasheet) +- ti,vmbch2-threshold: (tps65911) main battery discharged threshold + comparator. (see VMBCH_VSEL in TPS65910 datasheet) +- ti,en-gpio-sleep: enable sleep control for gpios + There should be 9 entries here, one for each gpio. + +Regulator Optional properties: +- ti,regulator-ext-sleep-control: enable external sleep + control through external inputs [0 (not enabled), 1 (EN1), 2 (EN2) or 4(EN3)] + If this property is not defined, it defaults to 0 (not enabled). + +Example: + + pmu: tps65910@d2 { + compatible = "ti,tps65910"; + reg = <0xd2>; + interrupt-parent = <&intc>; + interrupts = < 0 118 0x04 >; + + #gpio-cells = <2>; + gpio-controller; + + #interrupt-cells = <2>; + interrupt-controller; + + ti,vmbch-threshold = 0; + ti,vmbch2-threshold = 0; + + ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>; + + regulators { + vdd1_reg: vdd1 { + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + ti,regulator-ext-sleep-control = <0>; + }; + vdd2_reg: vdd2 { + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + ti,regulator-ext-sleep-control = <4>; + }; + vddctrl_reg: vddctrl { + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + ti,regulator-ext-sleep-control = <0>; + }; + vio_reg: vio { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + ti,regulator-ext-sleep-control = <1>; + }; + ldo1_reg: ldo1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3300000>; + ti,regulator-ext-sleep-control = <0>; + }; + ldo2_reg: ldo2 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + ti,regulator-ext-sleep-control = <0>; + }; + ldo3_reg: ldo3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3300000>; + ti,regulator-ext-sleep-control = <0>; + }; + ldo4_reg: ldo4 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + ti,regulator-ext-sleep-control = <0>; + }; + ldo5_reg: ldo5 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3300000>; + ti,regulator-ext-sleep-control = <0>; + }; + ldo6_reg: ldo6 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + ti,regulator-ext-sleep-control = <0>; + }; + ldo7_reg: ldo7 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + ti,regulator-ext-sleep-control = <1>; + }; + ldo8_reg: ldo8 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + ti,regulator-ext-sleep-control = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/twl6040.txt b/Documentation/devicetree/bindings/mfd/twl6040.txt new file mode 100644 index 000000000000..bc67c6f424aa --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/twl6040.txt @@ -0,0 +1,62 @@ +Texas Instruments TWL6040 family + +The TWL6040s are 8-channel high quality low-power audio codecs providing audio +and vibra functionality on OMAP4+ platforms. +They are connected ot the host processor via i2c for commands, McPDM for audio +data and commands. + +Required properties: +- compatible : Must be "ti,twl6040"; +- reg: must be 0x4b for i2c address +- interrupts: twl6040 has one interrupt line connecteded to the main SoC +- interrupt-parent: The parent interrupt controller +- twl6040,audpwron-gpio: Power on GPIO line for the twl6040 + +- vio-supply: Regulator for the twl6040 VIO supply +- v2v1-supply: Regulator for the twl6040 V2V1 supply + +Optional properties, nodes: +- enable-active-high: To power on the twl6040 during boot. + +Vibra functionality +Required properties: +- vddvibl-supply: Regulator for the left vibra motor +- vddvibr-supply: Regulator for the right vibra motor +- vibra { }: Configuration section for vibra parameters containing the following + properties: +- ti,vibldrv-res: Resistance parameter for left driver +- ti,vibrdrv-res: Resistance parameter for right driver +- ti,viblmotor-res: Resistance parameter for left motor +- ti,viblmotor-res: Resistance parameter for right motor + +Optional properties within vibra { } section: +- vddvibl_uV: If the vddvibl default voltage need to be changed +- vddvibr_uV: If the vddvibr default voltage need to be changed + +Example: +&i2c1 { + twl6040: twl@4b { + compatible = "ti,twl6040"; + reg = <0x4b>; + + interrupts = <0 119 4>; + interrupt-parent = <&gic>; + twl6040,audpwron-gpio = <&gpio4 31 0>; + + vio-supply = <&v1v8>; + v2v1-supply = <&v2v1>; + enable-active-high; + + /* regulators for vibra motor */ + vddvibl-supply = <&vbat>; + vddvibr-supply = <&vbat>; + + vibra { + /* Vibra driver, motor resistance parameters */ + ti,vibldrv-res = <8>; + ti,vibrdrv-res = <3>; + ti,viblmotor-res = <10>; + ti,vibrmotor-res = <10>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt index 64bcb8be973c..0d93b4b0e0e3 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt +++ b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt @@ -11,9 +11,11 @@ Required properties: - interrupt-parent : interrupt source phandle. - clock-frequency : specifies eSDHC base clock frequency. - sdhci,wp-inverted : (optional) specifies that eSDHC controller - reports inverted write-protect state; + reports inverted write-protect state; New devices should use + the generic "wp-inverted" property. - sdhci,1-bit-only : (optional) specifies that a controller can - only handle 1-bit data transfers. + only handle 1-bit data transfers. New devices should use the + generic "bus-width = <1>" property. - sdhci,auto-cmd12: (optional) specifies that a controller can only handle auto CMD12. diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt index ab22fe6e73ab..c7e404b3ef05 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt @@ -9,7 +9,7 @@ Required properties: - interrupts : Should contain eSDHC interrupt Optional properties: -- fsl,card-wired : Indicate the card is wired to host permanently +- non-removable : Indicate the card is wired to host permanently - fsl,cd-internal : Indicate to use controller internal card detection - fsl,wp-internal : Indicate to use controller internal write protection - cd-gpios : Specify GPIOs for card detection diff --git a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt index 89a0084df2f7..d64aea5a4203 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt +++ b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt @@ -10,7 +10,8 @@ Required properties: Optional properties: - gpios : may specify GPIOs in this order: Card-Detect GPIO, - Write-Protect GPIO. + Write-Protect GPIO. Note that this does not follow the + binding from mmc.txt, for historic reasons. - interrupts : the interrupt of a card detect interrupt. - interrupt-parent : the phandle for the interrupt controller that services interrupts for this device. diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt new file mode 100644 index 000000000000..6e70dcde0a71 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/mmc.txt @@ -0,0 +1,27 @@ +These properties are common to multiple MMC host controllers. Any host +that requires the respective functionality should implement them using +these definitions. + +Required properties: +- bus-width: Number of data lines, can be <1>, <4>, or <8> + +Optional properties: +- cd-gpios : Specify GPIOs for card detection, see gpio binding +- wp-gpios : Specify GPIOs for write protection, see gpio binding +- cd-inverted: when present, polarity on the wp gpio line is inverted +- wp-inverted: when present, polarity on the wp gpio line is inverted +- non-removable: non-removable slot (like eMMC) +- max-frequency: maximum operating clock frequency + +Example: + +sdhci@ab000000 { + compatible = "sdhci"; + reg = <0xab000000 0x200>; + interrupts = <23>; + bus-width = <4>; + cd-gpios = <&gpio 69 0>; + cd-inverted; + wp-gpios = <&gpio 70 0>; + max-frequency = <50000000>; +} diff --git a/Documentation/devicetree/bindings/mmc/mmci.txt b/Documentation/devicetree/bindings/mmc/mmci.txt new file mode 100644 index 000000000000..14a81d526118 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/mmci.txt @@ -0,0 +1,19 @@ +* ARM PrimeCell MultiMedia Card Interface (MMCI) PL180/1 + +The ARM PrimeCell MMCI PL180 and PL181 provides and interface for +reading and writing to MultiMedia and SD cards alike. + +Required properties: +- compatible : contains "arm,pl18x", "arm,primecell". +- reg : contains pl18x registers and length. +- interrupts : contains the device IRQ(s). +- arm,primecell-periphid : contains the PrimeCell Peripheral ID. + +Optional properties: +- wp-gpios : contains any write protect (ro) gpios +- cd-gpios : contains any card detection gpios +- cd-inverted : indicates whether the cd gpio is inverted +- max-frequency : contains the maximum operating frequency +- bus-width : number of data lines, can be <1>, <4>, or <8> +- mmc-cap-mmc-highspeed : indicates whether MMC is high speed capable +- mmc-cap-sd-highspeed : indicates whether SD is high speed capable diff --git a/Documentation/devicetree/bindings/mmc/mxs-mmc.txt b/Documentation/devicetree/bindings/mmc/mxs-mmc.txt new file mode 100644 index 000000000000..14d870a9e3db --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/mxs-mmc.txt @@ -0,0 +1,25 @@ +* Freescale MXS MMC controller + +The Freescale MXS Synchronous Serial Ports (SSP) can act as a MMC controller +to support MMC, SD, and SDIO types of memory cards. + +Required properties: +- compatible: Should be "fsl,<chip>-mmc". The supported chips include + imx23 and imx28. +- reg: Should contain registers location and length +- interrupts: Should contain ERROR and DMA interrupts +- fsl,ssp-dma-channel: APBH DMA channel for the SSP +- bus-width: Number of data lines, can be <1>, <4>, or <8> + +Optional properties: +- wp-gpios: Specify GPIOs for write protection + +Examples: + +ssp0: ssp@80010000 { + compatible = "fsl,imx28-mmc"; + reg = <0x80010000 2000>; + interrupts = <96 82>; + fsl,ssp-dma-channel = <0>; + bus-width = <8>; +}; diff --git a/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt index 7e51154679a6..f77c3031607f 100644 --- a/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt @@ -7,12 +7,12 @@ Required properties: - compatible : Should be "nvidia,<chip>-sdhci" - reg : Should contain SD/MMC registers location and length - interrupts : Should contain SD/MMC interrupt +- bus-width : Number of data lines, can be <1>, <4>, or <8> Optional properties: - cd-gpios : Specify GPIOs for card detection - wp-gpios : Specify GPIOs for write protection - power-gpios : Specify GPIOs for power control -- support-8bit : Boolean, indicates if 8-bit mode should be used. Example: @@ -23,5 +23,5 @@ sdhci@c8000200 { cd-gpios = <&gpio 69 0>; /* gpio PI5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 155 0>; /* gpio PT3 */ - support-8bit; + bus-width = <8>; }; diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt index dbd4368ab8cc..8a53958c9a9f 100644 --- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt +++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt @@ -15,7 +15,7 @@ Optional properties: ti,dual-volt: boolean, supports dual voltage cards <supply-name>-supply: phandle to the regulator device tree node "supply-name" examples are "vmmc", "vmmc_aux" etc -ti,bus-width: Number of data lines, default assumed is 1 if the property is missing. +bus-width: Number of data lines, default assumed is 1 if the property is missing. cd-gpios: GPIOs for card detection wp-gpios: GPIOs for write protection ti,non-removable: non-removable slot (like eMMC) @@ -27,7 +27,7 @@ Example: reg = <0x4809c000 0x400>; ti,hwmods = "mmc1"; ti,dual-volt; - ti,bus-width = <4>; + bus-width = <4>; vmmc-supply = <&vmmc>; /* phandle to regulator node */ ti,non-removable; }; diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt new file mode 100644 index 000000000000..1a5bbd346d22 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt @@ -0,0 +1,33 @@ +* Freescale General-Purpose Media Interface (GPMI) + +The GPMI nand controller provides an interface to control the +NAND flash chips. We support only one NAND chip now. + +Required properties: + - compatible : should be "fsl,<chip>-gpmi-nand" + - reg : should contain registers location and length for gpmi and bch. + - reg-names: Should contain the reg names "gpmi-nand" and "bch" + - interrupts : The first is the DMA interrupt number for GPMI. + The second is the BCH interrupt number. + - interrupt-names : The interrupt names "gpmi-dma", "bch"; + - fsl,gpmi-dma-channel : Should contain the dma channel it uses. + +The device tree may optionally contain sub-nodes describing partitions of the +address space. See partition.txt for more detail. + +Examples: + +gpmi-nand@8000c000 { + compatible = "fsl,imx28-gpmi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x8000c000 2000>, <0x8000a000 2000>; + reg-names = "gpmi-nand", "bch"; + interrupts = <88>, <41>; + interrupt-names = "gpmi-dma", "bch"; + fsl,gpmi-dma-channel = <4>; + + partition@0 { + ... + }; +}; diff --git a/Documentation/devicetree/bindings/mtd/mxc-nand.txt b/Documentation/devicetree/bindings/mtd/mxc-nand.txt new file mode 100644 index 000000000000..b5833d11c7be --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/mxc-nand.txt @@ -0,0 +1,19 @@ +* Freescale's mxc_nand + +Required properties: +- compatible: "fsl,imxXX-nand" +- reg: address range of the nfc block +- interrupts: irq to be used +- nand-bus-width: see nand.txt +- nand-ecc-mode: see nand.txt +- nand-on-flash-bbt: see nand.txt + +Example: + + nand@d8000000 { + compatible = "fsl,imx27-nand"; + reg = <0xd8000000 0x1000>; + interrupts = <29>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + }; diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt index de439517dff0..7ab9e1a2d8be 100644 --- a/Documentation/devicetree/bindings/net/fsl-fec.txt +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt @@ -14,7 +14,7 @@ Optional properties: Example: -fec@83fec000 { +ethernet@83fec000 { compatible = "fsl,imx51-fec", "fsl,imx27-fec"; reg = <0x83fec000 0x4000>; interrupts = <87>; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt index 3664d37e6799..b4480d5c3aca 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt @@ -4,6 +4,8 @@ Required properties: - compatible : "st,spear300-pinmux" : "st,spear310-pinmux" : "st,spear320-pinmux" + : "st,spear1310-pinmux" + : "st,spear1340-pinmux" - reg : Address range of the pinctrl registers - st,pinmux-mode: Mandatory for SPEAr300 and SPEAr320 and invalid for others. - Its values for SPEAr300: @@ -89,6 +91,37 @@ For SPEAr320 machines: "rmii0_1_grp", "i2c1_8_9_grp", "i2c1_98_99_grp", "i2c2_0_1_grp", "i2c2_2_3_grp", "i2c2_19_20_grp", "i2c2_75_76_grp", "i2c2_96_97_grp" +For SPEAr1310 machines: + "i2c0_grp", "ssp0_grp", "ssp0_cs0_grp", "ssp0_cs1_2_grp", "i2s0_grp", + "i2s1_grp", "clcd_grp", "clcd_high_res_grp", "arm_gpio_grp", + "smi_2_chips_grp", "smi_4_chips_grp", "gmii_grp", "rgmii_grp", + "smii_0_1_2_grp", "ras_mii_txclk_grp", "nand_8bit_grp", + "nand_16bit_grp", "nand_4_chips_grp", "keyboard_6x6_grp", + "keyboard_rowcol6_8_grp", "uart0_grp", "uart0_modem_grp", + "gpt0_tmr0_grp", "gpt0_tmr1_grp", "gpt1_tmr0_grp", "gpt1_tmr1_grp", + "sdhci_grp", "cf_grp", "xd_grp", "touch_xy_grp", + "uart1_disable_i2c_grp", "uart1_disable_sd_grp", "uart2_3_grp", + "uart4_grp", "uart5_grp", "rs485_0_1_tdm_0_1_grp", "i2c_1_2_grp", + "i2c3_dis_smi_clcd_grp", "i2c3_dis_sd_i2s0_grp", "i2c_4_5_dis_smi_grp", + "i2c4_dis_sd_grp", "i2c5_dis_sd_grp", "i2c_6_7_dis_kbd_grp", + "i2c6_dis_sd_grp", "i2c7_dis_sd_grp", "can0_dis_nor_grp", + "can0_dis_sd_grp", "can1_dis_sd_grp", "can1_dis_kbd_grp", "pcie0_grp", + "pcie1_grp", "pcie2_grp", "sata0_grp", "sata1_grp", "sata2_grp", + "ssp1_dis_kbd_grp", "ssp1_dis_sd_grp", "gpt64_grp" + +For SPEAr1340 machines: + "pads_as_gpio_grp", "fsmc_8bit_grp", "fsmc_16bit_grp", "fsmc_pnor_grp", + "keyboard_row_col_grp", "keyboard_col5_grp", "spdif_in_grp", + "spdif_out_grp", "gpt_0_1_grp", "pwm0_grp", "pwm1_grp", "pwm2_grp", + "pwm3_grp", "vip_mux_grp", "vip_mux_cam0_grp", "vip_mux_cam1_grp", + "vip_mux_cam2_grp", "vip_mux_cam3_grp", "cam0_grp", "cam1_grp", + "cam2_grp", "cam3_grp", "smi_grp", "ssp0_grp", "ssp0_cs1_grp", + "ssp0_cs2_grp", "ssp0_cs3_grp", "uart0_grp", "uart0_enh_grp", + "uart1_grp", "i2s_in_grp", "i2s_out_grp", "gmii_grp", "rgmii_grp", + "rmii_grp", "sgmii_grp", "i2c0_grp", "i2c1_grp", "cec0_grp", "cec1_grp", + "sdhci_grp", "cf_grp", "xd_grp", "clcd_grp", "arm_trace_grp", + "miphy_dbg_grp", "pcie_grp", "sata_grp" + Valid values for function names are: For All SPEAr3xx machines: "firda", "i2c0", "ssp_cs", "ssp0", "mii0", "gpio0", "uart0_ext", @@ -106,3 +139,17 @@ For SPEAr320 machines: "uart2", "uart3", "uart4", "uart5", "uart6", "rs485", "touchscreen", "can0", "can1", "pwm0_1", "pwm2", "pwm3", "ssp1", "ssp2", "mii2", "mii0_1", "i2c1", "i2c2" + + +For SPEAr1310 machines: + "i2c0", "ssp0", "i2s0", "i2s1", "clcd", "arm_gpio", "smi", "gmii", + "rgmii", "smii_0_1_2", "ras_mii_txclk", "nand", "keyboard", "uart0", + "gpt0", "gpt1", "sdhci", "cf", "xd", "touchscreen", "uart1", "uart2_3", + "uart4", "uart5", "rs485_0_1_tdm_0_1", "i2c_1_2", "i2c3_i2s1", + "i2c_4_5", "i2c_6_7", "can0", "can1", "pci", "sata", "ssp1", "gpt64" + +For SPEAr1340 machines: + "pads_as_gpio", "fsmc", "keyboard", "spdif_in", "spdif_out", "gpt_0_1", + "pwm", "vip", "cam0", "cam1", "cam2", "cam3", "smi", "ssp0", "uart0", + "uart1", "i2s", "gmac", "i2c0", "i2c1", "cec0", "cec1", "sdhci", "cf", + "xd", "clcd", "arm_trace", "miphy_dbg", "pcie", "sata" diff --git a/Documentation/devicetree/bindings/rtc/lpc32xx-rtc.txt b/Documentation/devicetree/bindings/rtc/lpc32xx-rtc.txt new file mode 100644 index 000000000000..a87a1e9bc060 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/lpc32xx-rtc.txt @@ -0,0 +1,15 @@ +* NXP LPC32xx SoC Real Time Clock controller + +Required properties: +- compatible: must be "nxp,lpc3220-rtc" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: The RTC interrupt + +Example: + + rtc@40024000 { + compatible = "nxp,lpc3220-rtc"; + reg = <0x40024000 0x1000>; + interrupts = <52 0>; + }; diff --git a/Documentation/devicetree/bindings/rtc/spear-rtc.txt b/Documentation/devicetree/bindings/rtc/spear-rtc.txt new file mode 100644 index 000000000000..ca67ac62108e --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/spear-rtc.txt @@ -0,0 +1,17 @@ +* SPEAr RTC + +Required properties: +- compatible : "st,spear600-rtc" +- reg : Address range of the rtc registers +- interrupt-parent: Should be the phandle for the interrupt controller + that services interrupts for this device +- interrupt: Should contain the rtc interrupt number + +Example: + + rtc@fc000000 { + compatible = "st,spear600-rtc"; + reg = <0xfc000000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <12>; + }; diff --git a/Documentation/devicetree/bindings/sound/omap-dmic.txt b/Documentation/devicetree/bindings/sound/omap-dmic.txt new file mode 100644 index 000000000000..fd8105f18978 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/omap-dmic.txt @@ -0,0 +1,21 @@ +* Texas Instruments OMAP4+ Digital Microphone Module + +Required properties: +- compatible: "ti,omap4-dmic" +- reg: Register location and size as an array: + <MPU access base address, size>, + <L3 interconnect address, size>; +- interrupts: Interrupt number for DMIC +- interrupt-parent: The parent interrupt controller +- ti,hwmods: Name of the hwmod associated with OMAP dmic IP + +Example: + +dmic: dmic@4012e000 { + compatible = "ti,omap4-dmic"; + reg = <0x4012e000 0x7f>, /* MPU private access */ + <0x4902e000 0x7f>; /* L3 Interconnect */ + interrupts = <0 114 0x4>; + interrupt-parent = <&gic>; + ti,hwmods = "dmic"; +}; diff --git a/Documentation/devicetree/bindings/sound/omap-mcpdm.txt b/Documentation/devicetree/bindings/sound/omap-mcpdm.txt new file mode 100644 index 000000000000..0741dff048dd --- /dev/null +++ b/Documentation/devicetree/bindings/sound/omap-mcpdm.txt @@ -0,0 +1,21 @@ +* Texas Instruments OMAP4+ McPDM + +Required properties: +- compatible: "ti,omap4-mcpdm" +- reg: Register location and size as an array: + <MPU access base address, size>, + <L3 interconnect address, size>; +- interrupts: Interrupt number for McPDM +- interrupt-parent: The parent interrupt controller +- ti,hwmods: Name of the hwmod associated to the McPDM + +Example: + +mcpdm: mcpdm@40132000 { + compatible = "ti,omap4-mcpdm"; + reg = <0x40132000 0x7f>, /* MPU private access */ + <0x49032000 0x7f>; /* L3 Interconnect */ + interrupts = <0 112 0x4>; + interrupt-parent = <&gic>; + ti,hwmods = "mcpdm"; +}; diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt index a9c0406280e8..b462d0c54823 100644 --- a/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt +++ b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt @@ -11,7 +11,7 @@ Optional properties: Example: -uart@73fbc000 { +serial@73fbc000 { compatible = "fsl,imx51-uart", "fsl,imx21-uart"; reg = <0x73fbc000 0x4000>; interrupts = <31>; diff --git a/Documentation/devicetree/bindings/usb/tegra-usb.txt b/Documentation/devicetree/bindings/usb/tegra-usb.txt index 007005ddbe12..e9b005dc7625 100644 --- a/Documentation/devicetree/bindings/usb/tegra-usb.txt +++ b/Documentation/devicetree/bindings/usb/tegra-usb.txt @@ -12,6 +12,9 @@ Required properties : - nvidia,vbus-gpio : If present, specifies a gpio that needs to be activated for the bus to be powered. +Required properties for phy_type == ulpi: + - nvidia,phy-reset-gpio : The GPIO used to reset the PHY. + Optional properties: - dr_mode : dual role mode. Indicates the working mode for nvidia,tegra20-ehci compatible controllers. Can be "host", "peripheral", diff --git a/Documentation/dma-buf-sharing.txt b/Documentation/dma-buf-sharing.txt index 3bbd5c51605a..ad86fb86c9a0 100644 --- a/Documentation/dma-buf-sharing.txt +++ b/Documentation/dma-buf-sharing.txt @@ -29,13 +29,6 @@ The buffer-user in memory, mapped into its own address space, so it can access the same area of memory. -*IMPORTANT*: [see https://lkml.org/lkml/2011/12/20/211 for more details] -For this first version, A buffer shared using the dma_buf sharing API: -- *may* be exported to user space using "mmap" *ONLY* by exporter, outside of - this framework. -- with this new iteration of the dma-buf api cpu access from the kernel has been - enable, see below for the details. - dma-buf operations for device dma only -------------------------------------- @@ -300,6 +293,17 @@ Access to a dma_buf from the kernel context involves three steps: Note that these calls need to always succeed. The exporter needs to complete any preparations that might fail in begin_cpu_access. + For some cases the overhead of kmap can be too high, a vmap interface + is introduced. This interface should be used very carefully, as vmalloc + space is a limited resources on many architectures. + + Interfaces: + void *dma_buf_vmap(struct dma_buf *dmabuf) + void dma_buf_vunmap(struct dma_buf *dmabuf, void *vaddr) + + The vmap call can fail if there is no vmap support in the exporter, or if it + runs out of vmalloc space. Fallback to kmap should be implemented. + 3. Finish access When the importer is done accessing the range specified in begin_cpu_access, @@ -313,6 +317,83 @@ Access to a dma_buf from the kernel context involves three steps: enum dma_data_direction dir); +Direct Userspace Access/mmap Support +------------------------------------ + +Being able to mmap an export dma-buf buffer object has 2 main use-cases: +- CPU fallback processing in a pipeline and +- supporting existing mmap interfaces in importers. + +1. CPU fallback processing in a pipeline + + In many processing pipelines it is sometimes required that the cpu can access + the data in a dma-buf (e.g. for thumbnail creation, snapshots, ...). To avoid + the need to handle this specially in userspace frameworks for buffer sharing + it's ideal if the dma_buf fd itself can be used to access the backing storage + from userspace using mmap. + + Furthermore Android's ION framework already supports this (and is otherwise + rather similar to dma-buf from a userspace consumer side with using fds as + handles, too). So it's beneficial to support this in a similar fashion on + dma-buf to have a good transition path for existing Android userspace. + + No special interfaces, userspace simply calls mmap on the dma-buf fd. + +2. Supporting existing mmap interfaces in exporters + + Similar to the motivation for kernel cpu access it is again important that + the userspace code of a given importing subsystem can use the same interfaces + with a imported dma-buf buffer object as with a native buffer object. This is + especially important for drm where the userspace part of contemporary OpenGL, + X, and other drivers is huge, and reworking them to use a different way to + mmap a buffer rather invasive. + + The assumption in the current dma-buf interfaces is that redirecting the + initial mmap is all that's needed. A survey of some of the existing + subsystems shows that no driver seems to do any nefarious thing like syncing + up with outstanding asynchronous processing on the device or allocating + special resources at fault time. So hopefully this is good enough, since + adding interfaces to intercept pagefaults and allow pte shootdowns would + increase the complexity quite a bit. + + Interface: + int dma_buf_mmap(struct dma_buf *, struct vm_area_struct *, + unsigned long); + + If the importing subsystem simply provides a special-purpose mmap call to set + up a mapping in userspace, calling do_mmap with dma_buf->file will equally + achieve that for a dma-buf object. + +3. Implementation notes for exporters + + Because dma-buf buffers have invariant size over their lifetime, the dma-buf + core checks whether a vma is too large and rejects such mappings. The + exporter hence does not need to duplicate this check. + + Because existing importing subsystems might presume coherent mappings for + userspace, the exporter needs to set up a coherent mapping. If that's not + possible, it needs to fake coherency by manually shooting down ptes when + leaving the cpu domain and flushing caches at fault time. Note that all the + dma_buf files share the same anon inode, hence the exporter needs to replace + the dma_buf file stored in vma->vm_file with it's own if pte shootdown is + requred. This is because the kernel uses the underlying inode's address_space + for vma tracking (and hence pte tracking at shootdown time with + unmap_mapping_range). + + If the above shootdown dance turns out to be too expensive in certain + scenarios, we can extend dma-buf with a more explicit cache tracking scheme + for userspace mappings. But the current assumption is that using mmap is + always a slower path, so some inefficiencies should be acceptable. + + Exporters that shoot down mappings (for any reasons) shall not do any + synchronization at fault time with outstanding device operations. + Synchronization is an orthogonal issue to sharing the backing storage of a + buffer and hence should not be handled by dma-buf itself. This is explictly + mentioned here because many people seem to want something like this, but if + different exporters handle this differently, buffer sharing can fail in + interesting ways depending upong the exporter (if userspace starts depending + upon this implicit synchronization). + Miscellaneous notes ------------------- @@ -336,6 +417,20 @@ Miscellaneous notes the exporting driver to create a dmabuf fd must provide a way to let userspace control setting of O_CLOEXEC flag passed in to dma_buf_fd(). +- If an exporter needs to manually flush caches and hence needs to fake + coherency for mmap support, it needs to be able to zap all the ptes pointing + at the backing storage. Now linux mm needs a struct address_space associated + with the struct file stored in vma->vm_file to do that with the function + unmap_mapping_range. But the dma_buf framework only backs every dma_buf fd + with the anon_file struct file, i.e. all dma_bufs share the same file. + + Hence exporters need to setup their own file (and address_space) association + by setting vma->vm_file and adjusting vma->vm_pgoff in the dma_buf mmap + callback. In the specific case of a gem driver the exporter could use the + shmem file already provided by gem (and set vm_pgoff = 0). Exporters can then + zap ptes by unmapping the corresponding range of the struct address_space + associated with their own file. + References: [1] struct dma_buf_ops in include/linux/dma-buf.h [2] All interfaces mentioned above defined in include/linux/dma-buf.h diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 50d82ae09e2a..56000b33340b 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -588,3 +588,27 @@ Why: Remount currently allows changing bound subsystems and replaced with conventional fsnotify. ---------------------------- + +What: KVM debugfs statistics +When: 2013 +Why: KVM tracepoints provide mostly equivalent information in a much more + flexible fashion. + +---------------------------- + +What: at91-mci driver ("CONFIG_MMC_AT91") +When: 3.7 +Why: There are two mci drivers: at91-mci and atmel-mci. The PDC support + was added to atmel-mci as a first step to support more chips. + Then at91-mci was kept only for old IP versions (on at91rm9200 and + at91sam9261). The support of these IP versions has just been added + to atmel-mci, so atmel-mci can be used for all chips. +Who: Ludovic Desroches <ludovic.desroches@atmel.com> + +---------------------------- + +What: net/wanrouter/ +When: June 2013 +Why: Unsupported/unmaintained/unused since 2.6 + +---------------------------- diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index 4fca82e5276e..8e2da1e06e3b 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -60,8 +60,8 @@ ata *); ssize_t (*getxattr) (struct dentry *, const char *, void *, size_t); ssize_t (*listxattr) (struct dentry *, char *, size_t); int (*removexattr) (struct dentry *, const char *); - void (*truncate_range)(struct inode *, loff_t, loff_t); int (*fiemap)(struct inode *, struct fiemap_extent_info *, u64 start, u64 len); + void (*update_time)(struct inode *, struct timespec *, int); locking rules: all may block @@ -87,8 +87,9 @@ setxattr: yes getxattr: no listxattr: no removexattr: yes -truncate_range: yes fiemap: no +update_time: no + Additionally, ->rmdir(), ->unlink() and ->rename() have ->i_mutex on victim. cross-directory ->rename() has (per-superblock) ->s_vfs_rename_sem. diff --git a/Documentation/filesystems/ext3.txt b/Documentation/filesystems/ext3.txt index b100adc38adb..293855e95000 100644 --- a/Documentation/filesystems/ext3.txt +++ b/Documentation/filesystems/ext3.txt @@ -59,9 +59,9 @@ commit=nrsec (*) Ext3 can be told to sync all its data and metadata Setting it to very large values will improve performance. -barrier=<0(*)|1> This enables/disables the use of write barriers in -barrier the jbd code. barrier=0 disables, barrier=1 enables. -nobarrier (*) This also requires an IO stack which can support +barrier=<0|1(*)> This enables/disables the use of write barriers in +barrier (*) the jbd code. barrier=0 disables, barrier=1 enables. +nobarrier This also requires an IO stack which can support barriers, and if jbd gets an error on a barrier write, it will disable again with a warning. Write barriers enforce proper on-disk ordering diff --git a/Documentation/filesystems/porting b/Documentation/filesystems/porting index 74acd9618819..8c91d1057d9a 100644 --- a/Documentation/filesystems/porting +++ b/Documentation/filesystems/porting @@ -297,7 +297,8 @@ in the beginning of ->setattr unconditionally. be used instead. It gets called whenever the inode is evicted, whether it has remaining links or not. Caller does *not* evict the pagecache or inode-associated metadata buffers; getting rid of those is responsibility of method, as it had -been for ->delete_inode(). +been for ->delete_inode(). Caller makes sure async writeback cannot be running +for the inode while (or after) ->evict_inode() is called. ->drop_inode() returns int now; it's called on final iput() with inode->i_lock held and it returns true if filesystems wants the inode to be @@ -306,14 +307,11 @@ updated appropriately. generic_delete_inode() is also alive and it consists simply of return 1. Note that all actual eviction work is done by caller after ->drop_inode() returns. - clear_inode() is gone; use end_writeback() instead. As before, it must -be called exactly once on each call of ->evict_inode() (as it used to be for -each call of ->delete_inode()). Unlike before, if you are using inode-associated -metadata buffers (i.e. mark_buffer_dirty_inode()), it's your responsibility to -call invalidate_inode_buffers() before end_writeback(). - No async writeback (and thus no calls of ->write_inode()) will happen -after end_writeback() returns, so actions that should not overlap with ->write_inode() -(e.g. freeing on-disk inode if i_nlink is 0) ought to be done after that call. + As before, clear_inode() must be called exactly once on each call of +->evict_inode() (as it used to be for each call of ->delete_inode()). Unlike +before, if you are using inode-associated metadata buffers (i.e. +mark_buffer_dirty_inode()), it's your responsibility to call +invalidate_inode_buffers() before clear_inode(). NOTE: checking i_nlink in the beginning of ->write_inode() and bailing out if it's zero is not *and* *never* *had* *been* enough. Final unlink() and iput() diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index ef088e55ab2e..fb0a6aeb936c 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -40,6 +40,7 @@ Table of Contents 3.4 /proc/<pid>/coredump_filter - Core dump filtering settings 3.5 /proc/<pid>/mountinfo - Information about mounts 3.6 /proc/<pid>/comm & /proc/<pid>/task/<tid>/comm + 3.7 /proc/<pid>/task/<tid>/children - Information about task children 4 Configuring procfs 4.1 Mount options @@ -310,6 +311,11 @@ Table 1-4: Contents of the stat files (as of 2.6.30-rc7) start_data address above which program data+bss is placed end_data address below which program data+bss is placed start_brk address above which program heap can be expanded with brk() + arg_start address above which program command line is placed + arg_end address below which program command line is placed + env_start address above which program environment is placed + env_end address below which program environment is placed + exit_code the thread's exit_code in the form reported by the waitpid system call .............................................................................. The /proc/PID/maps file containing the currently mapped memory regions and @@ -743,6 +749,7 @@ Committed_AS: 100056 kB VmallocTotal: 112216 kB VmallocUsed: 428 kB VmallocChunk: 111088 kB +AnonHugePages: 49152 kB MemTotal: Total usable ram (i.e. physical ram minus a few reserved bits and the kernel binary code) @@ -776,6 +783,7 @@ VmallocChunk: 111088 kB Dirty: Memory which is waiting to get written back to the disk Writeback: Memory which is actively being written back to the disk AnonPages: Non-file backed pages mapped into userspace page tables +AnonHugePages: Non-file backed huge pages mapped into userspace page tables Mapped: files which have been mmaped, such as libraries Slab: in-kernel data structures cache SReclaimable: Part of Slab, that might be reclaimed, such as caches @@ -1576,6 +1584,23 @@ then the kernel's TASK_COMM_LEN (currently 16 chars) will result in a truncated comm value. +3.7 /proc/<pid>/task/<tid>/children - Information about task children +------------------------------------------------------------------------- +This file provides a fast way to retrieve first level children pids +of a task pointed by <pid>/<tid> pair. The format is a space separated +stream of pids. + +Note the "first level" here -- if a child has own children they will +not be listed here, one needs to read /proc/<children-pid>/task/<tid>/children +to obtain the descendants. + +Since this interface is intended to be fast and cheap it doesn't +guarantee to provide precise results and some children might be +skipped, especially if they've exited right after we printed their +pids, so one need to either stop or freeze processes being inspected +if precise results are needed. + + ------------------------------------------------------------------------------ Configuring procfs ------------------------------------------------------------------------------ diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index 0d0492028082..efd23f481704 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -363,7 +363,7 @@ struct inode_operations { ssize_t (*getxattr) (struct dentry *, const char *, void *, size_t); ssize_t (*listxattr) (struct dentry *, char *, size_t); int (*removexattr) (struct dentry *, const char *); - void (*truncate_range)(struct inode *, loff_t, loff_t); + void (*update_time)(struct inode *, struct timespec *, int); }; Again, all methods are called without any locks being held, unless @@ -472,9 +472,9 @@ otherwise noted. removexattr: called by the VFS to remove an extended attribute from a file. This method is called by removexattr(2) system call. - truncate_range: a method provided by the underlying filesystem to truncate a - range of blocks , i.e. punch a hole somewhere in a file. - + update_time: called by the VFS to update a specific time or the i_version of + an inode. If this is not defined the VFS will update the inode itself + and call mark_inode_dirty_sync. The Address Space Object ======================== @@ -760,7 +760,7 @@ struct file_operations ---------------------- This describes how the VFS can manipulate an open file. As of kernel -2.6.22, the following members are defined: +3.5, the following members are defined: struct file_operations { struct module *owner; @@ -790,6 +790,8 @@ struct file_operations { int (*flock) (struct file *, int, struct file_lock *); ssize_t (*splice_write)(struct pipe_inode_info *, struct file *, size_t, unsigned int); ssize_t (*splice_read)(struct file *, struct pipe_inode_info *, size_t, unsigned int); + int (*setlease)(struct file *, long arg, struct file_lock **); + long (*fallocate)(struct file *, int mode, loff_t offset, loff_t len); }; Again, all methods are called without any locks being held, unless @@ -858,6 +860,11 @@ otherwise noted. splice_read: called by the VFS to splice data from file to a pipe. This method is used by the splice(2) system call + setlease: called by the VFS to set or release a file lock lease. + setlease has the file_lock_lock held and must not sleep. + + fallocate: called by the VFS to preallocate blocks or punch a hole. + Note that the file operations are implemented by the specific filesystem in which the inode resides. When opening a device node (character or block special) most filesystems will call special diff --git a/Documentation/i2c/functionality b/Documentation/i2c/functionality index 42c17c1fb3cd..b0ff2ab596ce 100644 --- a/Documentation/i2c/functionality +++ b/Documentation/i2c/functionality @@ -18,9 +18,9 @@ For the most up-to-date list of functionality constants, please check adapters typically can not do these) I2C_FUNC_10BIT_ADDR Handles the 10-bit address extensions I2C_FUNC_PROTOCOL_MANGLING Knows about the I2C_M_IGNORE_NAK, - I2C_M_REV_DIR_ADDR, I2C_M_NOSTART and - I2C_M_NO_RD_ACK flags (which modify the - I2C protocol!) + I2C_M_REV_DIR_ADDR and I2C_M_NO_RD_ACK + flags (which modify the I2C protocol!) + I2C_FUNC_NOSTART Can skip repeated start sequence I2C_FUNC_SMBUS_QUICK Handles the SMBus write_quick command I2C_FUNC_SMBUS_READ_BYTE Handles the SMBus read_byte command I2C_FUNC_SMBUS_WRITE_BYTE Handles the SMBus write_byte command @@ -50,6 +50,9 @@ A few combinations of the above flags are also defined for your convenience: emulated by a real I2C adapter (using the transparent emulation layer) +In kernel versions prior to 3.5 I2C_FUNC_NOSTART was implemented as +part of I2C_FUNC_PROTOCOL_MANGLING. + ADAPTER IMPLEMENTATION ---------------------- diff --git a/Documentation/i2c/i2c-protocol b/Documentation/i2c/i2c-protocol index 10518dd58814..0b3e62d1f77a 100644 --- a/Documentation/i2c/i2c-protocol +++ b/Documentation/i2c/i2c-protocol @@ -49,7 +49,9 @@ a byte read, followed by a byte write: Modified transactions ===================== -We have found some I2C devices that needs the following modifications: +The following modifications to the I2C protocol can also be generated, +with the exception of I2C_M_NOSTART these are usually only needed to +work around device issues: Flag I2C_M_NOSTART: In a combined transaction, no 'S Addr Wr/Rd [A]' is generated at some @@ -60,6 +62,11 @@ We have found some I2C devices that needs the following modifications: we do not generate Addr, but we do generate the startbit S. This will probably confuse all other clients on your bus, so don't try this. + This is often used to gather transmits from multiple data buffers in + system memory into something that appears as a single transfer to the + I2C device but may also be used between direction changes by some + rare devices. + Flags I2C_M_REV_DIR_ADDR This toggles the Rd/Wr flag. That is, if you want to do a write, but need to emit an Rd instead of a Wr, or vice versa, you set this diff --git a/Documentation/i2c/muxes/gpio-i2cmux b/Documentation/i2c/muxes/i2c-mux-gpio index 811cd78d4cdc..bd9b2299b739 100644 --- a/Documentation/i2c/muxes/gpio-i2cmux +++ b/Documentation/i2c/muxes/i2c-mux-gpio @@ -1,11 +1,11 @@ -Kernel driver gpio-i2cmux +Kernel driver i2c-gpio-mux Author: Peter Korsgaard <peter.korsgaard@barco.com> Description ----------- -gpio-i2cmux is an i2c mux driver providing access to I2C bus segments +i2c-gpio-mux is an i2c mux driver providing access to I2C bus segments from a master I2C bus and a hardware MUX controlled through GPIO pins. E.G.: @@ -26,16 +26,16 @@ according to the settings of the GPIO pins 1..N. Usage ----- -gpio-i2cmux uses the platform bus, so you need to provide a struct +i2c-gpio-mux uses the platform bus, so you need to provide a struct platform_device with the platform_data pointing to a struct gpio_i2cmux_platform_data with the I2C adapter number of the master bus, the number of bus segments to create and the GPIO pins used -to control it. See include/linux/gpio-i2cmux.h for details. +to control it. See include/linux/i2c-gpio-mux.h for details. E.G. something like this for a MUX providing 4 bus segments controlled through 3 GPIO pins: -#include <linux/gpio-i2cmux.h> +#include <linux/i2c-gpio-mux.h> #include <linux/platform_device.h> static const unsigned myboard_gpiomux_gpios[] = { @@ -57,7 +57,7 @@ static struct gpio_i2cmux_platform_data myboard_i2cmux_data = { }; static struct platform_device myboard_i2cmux = { - .name = "gpio-i2cmux", + .name = "i2c-gpio-mux", .id = 0, .dev = { .platform_data = &myboard_i2cmux_data, diff --git a/Documentation/initrd.txt b/Documentation/initrd.txt index 1ba84f3584e3..4e1839ccb555 100644 --- a/Documentation/initrd.txt +++ b/Documentation/initrd.txt @@ -362,5 +362,5 @@ Resources http://www.almesberger.net/cv/papers/ols2k-9.ps.gz [2] newlib package (experimental), with initrd example http://sources.redhat.com/newlib/ -[3] Brouwer, Andries; "util-linux: Miscellaneous utilities for Linux" - ftp://ftp.win.tue.nl/pub/linux-local/utils/util-linux/ +[3] util-linux: Miscellaneous utilities for Linux + http://www.kernel.org/pub/linux/utils/util-linux/ diff --git a/Documentation/kbuild/kbuild.txt b/Documentation/kbuild/kbuild.txt index 68e32bb6bd80..6466704d47b5 100644 --- a/Documentation/kbuild/kbuild.txt +++ b/Documentation/kbuild/kbuild.txt @@ -50,6 +50,10 @@ LDFLAGS_MODULE -------------------------------------------------- Additional options used for $(LD) when linking modules. +LDFLAGS_vmlinux +-------------------------------------------------- +Additional options passed to final link of vmlinux. + KBUILD_VERBOSE -------------------------------------------------- Set the kbuild verbosity. Can be assigned same values as "V=...". @@ -214,3 +218,18 @@ KBUILD_BUILD_USER, KBUILD_BUILD_HOST These two variables allow to override the user@host string displayed during boot and in /proc/version. The default value is the output of the commands whoami and host, respectively. + +KBUILD_LDS +-------------------------------------------------- +The linker script with full path. Assigned by the top-level Makefile. + +KBUILD_VMLINUX_INIT +-------------------------------------------------- +All object files for the init (first) part of vmlinux. +Files specified with KBUILD_VMLINUX_INIT are linked first. + +KBUILD_VMLINUX_MAIN +-------------------------------------------------- +All object files for the main part of vmlinux. +KBUILD_VMLINUX_INIT and KBUILD_VMLINUX_MAIN together specify +all the object files used to link vmlinux. diff --git a/Documentation/kbuild/kconfig.txt b/Documentation/kbuild/kconfig.txt index 9d5f2a90dca9..a09f1a6a830c 100644 --- a/Documentation/kbuild/kconfig.txt +++ b/Documentation/kbuild/kconfig.txt @@ -53,15 +53,15 @@ KCONFIG_ALLCONFIG -------------------------------------------------- (partially based on lkml email from/by Rob Landley, re: miniconfig) -------------------------------------------------- -The allyesconfig/allmodconfig/allnoconfig/randconfig variants can -also use the environment variable KCONFIG_ALLCONFIG as a flag or a -filename that contains config symbols that the user requires to be -set to a specific value. If KCONFIG_ALLCONFIG is used without a -filename, "make *config" checks for a file named -"all{yes/mod/no/def/random}.config" (corresponding to the *config command -that was used) for symbol values that are to be forced. If this file -is not found, it checks for a file named "all.config" to contain forced -values. +The allyesconfig/allmodconfig/allnoconfig/randconfig variants can also +use the environment variable KCONFIG_ALLCONFIG as a flag or a filename +that contains config symbols that the user requires to be set to a +specific value. If KCONFIG_ALLCONFIG is used without a filename where +KCONFIG_ALLCONFIG == "" or KCONFIG_ALLCONFIG == "1", "make *config" +checks for a file named "all{yes/mod/no/def/random}.config" +(corresponding to the *config command that was used) for symbol values +that are to be forced. If this file is not found, it checks for a +file named "all.config" to contain forced values. This enables you to create "miniature" config (miniconfig) or custom config files containing just the config symbols that you are interested diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index ea38cd1f0aba..a92c5ebf373e 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -335,6 +335,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted. requirements as needed. This option does not override iommu=pt + amd_iommu_dump= [HW,X86-64] + Enable AMD IOMMU driver option to dump the ACPI table + for AMD IOMMU. With this option enabled, AMD IOMMU + driver will print ACPI tables for AMD IOMMU during + IOMMU initialization. + amijoy.map= [HW,JOY] Amiga joystick support Map of devices attached to JOY0DAT and JOY1DAT Format: <a>,<b> @@ -397,8 +403,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted. atkbd.softrepeat= [HW] Use software keyboard repeat - autotest [IA-64] - baycom_epp= [HW,AX25] Format: <io>,<mode> @@ -508,6 +512,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted. Also note the kernel might malfunction if you disable some critical bits. + cma=nn[MG] [ARM,KNL] + Sets the size of kernel global memory area for contiguous + memory allocations. For more information, see + include/linux/dma-contiguous.h + cmo_free_hint= [PPC] Format: { yes | no } Specify whether pages are marked as being inactive when they are freed. This is used in CMO environments @@ -515,6 +524,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted. a hypervisor. Default: yes + coherent_pool=nn[KMG] [ARM,KNL] + Sets the size of memory pool for coherent, atomic dma + allocations if Contiguous Memory Allocator (CMA) is used. + code_bytes [X86] How many bytes of object code to print in an oops report. Range: 0 - 8192 @@ -1444,8 +1457,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted. devices can be requested on-demand with the /dev/loop-control interface. - mcatest= [IA-64] - mce [X86-32] Machine Check Exception mce=option [X86-64] See Documentation/x86/x86_64/boot-options.txt diff --git a/Documentation/leds/ledtrig-transient.txt b/Documentation/leds/ledtrig-transient.txt new file mode 100644 index 000000000000..3bd38b487df1 --- /dev/null +++ b/Documentation/leds/ledtrig-transient.txt @@ -0,0 +1,152 @@ +LED Transient Trigger +===================== + +The leds timer trigger does not currently have an interface to activate +a one shot timer. The current support allows for setting two timers, one for +specifying how long a state to be on, and the second for how long the state +to be off. The delay_on value specifies the time period an LED should stay +in on state, followed by a delay_off value that specifies how long the LED +should stay in off state. The on and off cycle repeats until the trigger +gets deactivated. There is no provision for one time activation to implement +features that require an on or off state to be held just once and then stay in +the original state forever. + +Without one shot timer interface, user space can still use timer trigger to +set a timer to hold a state, however when user space application crashes or +goes away without deactivating the timer, the hardware will be left in that +state permanently. + +As a specific example of this use-case, let's look at vibrate feature on +phones. Vibrate function on phones is implemented using PWM pins on SoC or +PMIC. There is a need to activate one shot timer to control the vibrate +feature, to prevent user space crashes leaving the phone in vibrate mode +permanently causing the battery to drain. + +Transient trigger addresses the need for one shot timer activation. The +transient trigger can be enabled and disabled just like the other leds +triggers. + +When an led class device driver registers itself, it can specify all leds +triggers it supports and a default trigger. During registration, activation +routine for the default trigger gets called. During registration of an led +class device, the LED state does not change. + +When the driver unregisters, deactivation routine for the currently active +trigger will be called, and LED state is changed to LED_OFF. + +Driver suspend changes the LED state to LED_OFF and resume doesn't change +the state. Please note that there is no explicit interaction between the +suspend and resume actions and the currently enabled trigger. LED state +changes are suspended while the driver is in suspend state. Any timers +that are active at the time driver gets suspended, continue to run, without +being able to actually change the LED state. Once driver is resumed, triggers +start functioning again. + +LED state changes are controlled using brightness which is a common led +class device property. When brightness is set to 0 from user space via +echo 0 > brightness, it will result in deactivating the current trigger. + +Transient trigger uses standard register and unregister interfaces. During +trigger registration, for each led class device that specifies this trigger +as its default trigger, trigger activation routine will get called. During +registration, the LED state does not change, unless there is another trigger +active, in which case LED state changes to LED_OFF. + +During trigger unregistration, LED state gets changed to LED_OFF. + +Transient trigger activation routine doesn't change the LED state. It +creates its properties and does its initialization. Transient trigger +deactivation routine, will cancel any timer that is active before it cleans +up and removes the properties it created. It will restore the LED state to +non-transient state. When driver gets suspended, irrespective of the transient +state, the LED state changes to LED_OFF. + +Transient trigger can be enabled and disabled from user space on led class +devices, that support this trigger as shown below: + +echo transient > trigger +echo none > trigger + +NOTE: Add a new property trigger state to control the state. + +This trigger exports three properties, activate, state, and duration. When +transient trigger is activated these properties are set to default values. + +- duration allows setting timer value in msecs. The initial value is 0. +- activate allows activating and deactivating the timer specified by + duration as needed. The initial and default value is 0. This will allow + duration to be set after trigger activation. +- state allows user to specify a transient state to be held for the specified + duration. + + activate - one shot timer activate mechanism. + 1 when activated, 0 when deactivated. + default value is zero when transient trigger is enabled, + to allow duration to be set. + + activate state indicates a timer with a value of specified + duration running. + deactivated state indicates that there is no active timer + running. + + duration - one shot timer value. When activate is set, duration value + is used to start a timer that runs once. This value doesn't + get changed by the trigger unless user does a set via + echo new_value > duration + + state - transient state to be held. It has two values 0 or 1. 0 maps + to LED_OFF and 1 maps to LED_FULL. The specified state is + held for the duration of the one shot timer and then the + state gets changed to the non-transient state which is the + inverse of transient state. + If state = LED_FULL, when the timer runs out the state will + go back to LED_OFF. + If state = LED_OFF, when the timer runs out the state will + go back to LED_FULL. + Please note that current LED state is not checked prior to + changing the state to the specified state. + Driver could map these values to inverted depending on the + default states it defines for the LED in its brightness_set() + interface which is called from the led brightness_set() + interfaces to control the LED state. + +When timer expires activate goes back to deactivated state, duration is left +at the set value to be used when activate is set at a future time. This will +allow user app to set the time once and activate it to run it once for the +specified value as needed. When timer expires, state is restored to the +non-transient state which is the inverse of the transient state. + + echo 1 > activate - starts timer = duration when duration is not 0. + echo 0 > activate - cancels currently running timer. + echo n > duration - stores timer value to be used upon next + activate. Currently active timer if + any, continues to run for the specified time. + echo 0 > duration - stores timer value to be used upon next + activate. Currently active timer if any, + continues to run for the specified time. + echo 1 > state - stores desired transient state LED_FULL to be + held for the specified duration. + echo 0 > state - stores desired transient state LED_OFF to be + held for the specified duration. + +What is not supported: +====================== +- Timer activation is one shot and extending and/or shortening the timer + is not supported. + +Example use-case 1: + echo transient > trigger + echo n > duration + echo 1 > state +repeat the following step as needed: + echo 1 > activate - start timer = duration to run once + echo 1 > activate - start timer = duration to run once + echo none > trigger + +This trigger is intended to be used for for the following example use cases: + - Control of vibrate (phones, tablets etc.) hardware by user space app. + - Use of LED by user space app as activity indicator. + - Use of LED by user space app as a kind of watchdog indicator -- as + long as the app is alive, it can keep the LED illuminated, if it dies + the LED will be extinguished automatically. + - Use by any user space app that needs a transient GPIO output. diff --git a/Documentation/power/charger-manager.txt b/Documentation/power/charger-manager.txt index fdcca991df30..b4f7f4b23f64 100644 --- a/Documentation/power/charger-manager.txt +++ b/Documentation/power/charger-manager.txt @@ -44,6 +44,16 @@ Charger Manager supports the following: Normally, the platform will need to resume and suspend some devices that are used by Charger Manager. +* Support for premature full-battery event handling + If the battery voltage drops by "fullbatt_vchkdrop_uV" after + "fullbatt_vchkdrop_ms" from the full-battery event, the framework + restarts charging. This check is also performed while suspended by + setting wakeup time accordingly and using suspend_again. + +* Support for uevent-notify + With the charger-related events, the device sends + notification to users with UEVENT. + 2. Global Charger-Manager Data related with suspend_again ======================================================== In order to setup Charger Manager with suspend-again feature @@ -55,7 +65,7 @@ if there are multiple batteries. If there are multiple batteries, the multiple instances of Charger Manager share the same charger_global_desc and it will manage in-suspend monitoring for all instances of Charger Manager. -The user needs to provide all the two entries properly in order to activate +The user needs to provide all the three entries properly in order to activate in-suspend monitoring: struct charger_global_desc { @@ -74,6 +84,11 @@ bool (*rtc_only_wakeup)(void); same struct. If there is any other wakeup source triggered the wakeup, it should return false. If the "rtc" is the only wakeup reason, it should return true. + +bool assume_timer_stops_in_suspend; + : if true, Charger Manager assumes that + the timer (CM uses jiffies as timer) stops during suspend. Then, CM + assumes that the suspend-duration is same as the alarm length. }; 3. How to setup suspend_again @@ -111,6 +126,16 @@ enum polling_modes polling_mode; CM_POLL_CHARGING_ONLY: poll this battery if and only if the battery is being charged. +unsigned int fullbatt_vchkdrop_ms; +unsigned int fullbatt_vchkdrop_uV; + : If both have non-zero values, Charger Manager will check the + battery voltage drop fullbatt_vchkdrop_ms after the battery is fully + charged. If the voltage drop is over fullbatt_vchkdrop_uV, Charger + Manager will try to recharge the battery by disabling and enabling + chargers. Recharge with voltage drop condition only (without delay + condition) is needed to be implemented with hardware interrupts from + fuel gauges or charger devices/chips. + unsigned int fullbatt_uV; : If specified with a non-zero value, Charger Manager assumes that the battery is full (capacity = 100) if the battery is not being @@ -122,6 +147,8 @@ unsigned int polling_interval_ms; this battery every polling_interval_ms or more frequently. enum data_source battery_present; + : CM_BATTERY_PRESENT: assume that the battery exists. + CM_NO_BATTERY: assume that the battery does not exists. CM_FUEL_GAUGE: get battery presence information from fuel gauge. CM_CHARGER_STAT: get battery presence from chargers. @@ -151,7 +178,17 @@ bool measure_battery_temp; the value of measure_battery_temp. }; -5. Other Considerations +5. Notify Charger-Manager of charger events: cm_notify_event() +========================================================= +If there is an charger event is required to notify +Charger Manager, a charger device driver that triggers the event can call +cm_notify_event(psy, type, msg) to notify the corresponding Charger Manager. +In the function, psy is the charger driver's power_supply pointer, which is +associated with Charger-Manager. The parameter "type" +is the same as irq's type (enum cm_event_types). The event message "msg" is +optional and is effective only if the event type is "UNDESCRIBED" or "OTHERS". + +6. Other Considerations ======================= At the charger/battery-related events such as battery-pulled-out, diff --git a/Documentation/power/power_supply_class.txt b/Documentation/power/power_supply_class.txt index 9f16c5178b66..211831d4095f 100644 --- a/Documentation/power/power_supply_class.txt +++ b/Documentation/power/power_supply_class.txt @@ -84,6 +84,8 @@ are already charged or discharging, 'n/a' can be displayed (or HEALTH - represents health of the battery, values corresponds to POWER_SUPPLY_HEALTH_*, defined in battery.h. +VOLTAGE_OCV - open circuit voltage of the battery. + VOLTAGE_MAX_DESIGN, VOLTAGE_MIN_DESIGN - design values for maximal and minimal power supply voltages. Maximal/minimal means values of voltages when battery considered "full"/"empty" at normal conditions. Yes, there is diff --git a/Documentation/sysctl/fs.txt b/Documentation/sysctl/fs.txt index 88fd7f5c8dcd..13d6166d7a27 100644 --- a/Documentation/sysctl/fs.txt +++ b/Documentation/sysctl/fs.txt @@ -225,6 +225,13 @@ a queue must be less or equal then msg_max. maximum message size value (it is every message queue's attribute set during its creation). +/proc/sys/fs/mqueue/msg_default is a read/write file for setting/getting the +default number of messages in a queue value if attr parameter of mq_open(2) is +NULL. If it exceed msg_max, the default value is initialized msg_max. + +/proc/sys/fs/mqueue/msgsize_default is a read/write file for setting/getting +the default message size value if attr parameter of mq_open(2) is NULL. If it +exceed msgsize_max, the default value is initialized msgsize_max. 4. /proc/sys/fs/epoll - Configuration options for the epoll interface -------------------------------------------------------- diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index 6386f8c0482e..930126698a0f 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -2,6 +2,7 @@ The Definitive KVM (Kernel-based Virtual Machine) API Documentation =================================================================== 1. General description +---------------------- The kvm API is a set of ioctls that are issued to control various aspects of a virtual machine. The ioctls belong to three classes @@ -23,7 +24,9 @@ of a virtual machine. The ioctls belong to three classes Only run vcpu ioctls from the same thread that was used to create the vcpu. + 2. File descriptors +------------------- The kvm API is centered around file descriptors. An initial open("/dev/kvm") obtains a handle to the kvm subsystem; this handle @@ -41,7 +44,9 @@ not cause harm to the host, their actual behavior is not guaranteed by the API. The only supported use is one virtual machine per process, and one vcpu per thread. + 3. Extensions +------------- As of Linux 2.6.22, the KVM ABI has been stabilized: no backward incompatible change are allowed. However, there is an extension @@ -53,7 +58,9 @@ Instead, kvm defines extension identifiers and a facility to query whether a particular extension identifier is available. If it is, a set of ioctls is available for application use. + 4. API description +------------------ This section describes ioctls that can be used to control kvm guests. For each ioctl, the following information is provided along with a @@ -75,6 +82,7 @@ description: Returns: the return value. General error numbers (EBADF, ENOMEM, EINVAL) are not detailed, but errors with specific meanings are. + 4.1 KVM_GET_API_VERSION Capability: basic @@ -90,6 +98,7 @@ supported. Applications should refuse to run if KVM_GET_API_VERSION returns a value other than 12. If this check passes, all ioctls described as 'basic' will be available. + 4.2 KVM_CREATE_VM Capability: basic @@ -109,6 +118,7 @@ In order to create user controlled virtual machines on S390, check KVM_CAP_S390_UCONTROL and use the flag KVM_VM_S390_UCONTROL as privileged user (CAP_SYS_ADMIN). + 4.3 KVM_GET_MSR_INDEX_LIST Capability: basic @@ -135,6 +145,7 @@ Note: if kvm indicates supports MCE (KVM_CAP_MCE), then the MCE bank MSRs are not returned in the MSR list, as different vcpus can have a different number of banks, as set via the KVM_X86_SETUP_MCE ioctl. + 4.4 KVM_CHECK_EXTENSION Capability: basic @@ -149,6 +160,7 @@ receives an integer that describes the extension availability. Generally 0 means no and 1 means yes, but some extensions may report additional information in the integer return value. + 4.5 KVM_GET_VCPU_MMAP_SIZE Capability: basic @@ -161,6 +173,7 @@ The KVM_RUN ioctl (cf.) communicates with userspace via a shared memory region. This ioctl returns the size of that region. See the KVM_RUN documentation for details. + 4.6 KVM_SET_MEMORY_REGION Capability: basic @@ -171,6 +184,7 @@ Returns: 0 on success, -1 on error This ioctl is obsolete and has been removed. + 4.7 KVM_CREATE_VCPU Capability: basic @@ -223,6 +237,7 @@ machines, the resulting vcpu fd can be memory mapped at page offset KVM_S390_SIE_PAGE_OFFSET in order to obtain a memory map of the virtual cpu's hardware control block. + 4.8 KVM_GET_DIRTY_LOG (vm ioctl) Capability: basic @@ -246,6 +261,7 @@ since the last call to this ioctl. Bit 0 is the first page in the memory slot. Ensure the entire structure is cleared to avoid padding issues. + 4.9 KVM_SET_MEMORY_ALIAS Capability: basic @@ -256,6 +272,7 @@ Returns: 0 (success), -1 (error) This ioctl is obsolete and has been removed. + 4.10 KVM_RUN Capability: basic @@ -272,6 +289,7 @@ obtained by mmap()ing the vcpu fd at offset 0, with the size given by KVM_GET_VCPU_MMAP_SIZE. The parameter block is formatted as a 'struct kvm_run' (see below). + 4.11 KVM_GET_REGS Capability: basic @@ -292,6 +310,7 @@ struct kvm_regs { __u64 rip, rflags; }; + 4.12 KVM_SET_REGS Capability: basic @@ -304,6 +323,7 @@ Writes the general purpose registers into the vcpu. See KVM_GET_REGS for the data structure. + 4.13 KVM_GET_SREGS Capability: basic @@ -331,6 +351,7 @@ interrupt_bitmap is a bitmap of pending external interrupts. At most one bit may be set. This interrupt has been acknowledged by the APIC but not yet injected into the cpu core. + 4.14 KVM_SET_SREGS Capability: basic @@ -342,6 +363,7 @@ Returns: 0 on success, -1 on error Writes special registers into the vcpu. See KVM_GET_SREGS for the data structures. + 4.15 KVM_TRANSLATE Capability: basic @@ -365,6 +387,7 @@ struct kvm_translation { __u8 pad[5]; }; + 4.16 KVM_INTERRUPT Capability: basic @@ -413,6 +436,7 @@ c) KVM_INTERRUPT_SET_LEVEL Note that any value for 'irq' other than the ones stated above is invalid and incurs unexpected behavior. + 4.17 KVM_DEBUG_GUEST Capability: basic @@ -423,6 +447,7 @@ Returns: -1 on error Support for this has been removed. Use KVM_SET_GUEST_DEBUG instead. + 4.18 KVM_GET_MSRS Capability: basic @@ -451,6 +476,7 @@ Application code should set the 'nmsrs' member (which indicates the size of the entries array) and the 'index' member of each array entry. kvm will fill in the 'data' member. + 4.19 KVM_SET_MSRS Capability: basic @@ -466,6 +492,7 @@ Application code should set the 'nmsrs' member (which indicates the size of the entries array), and the 'index' and 'data' members of each array entry. + 4.20 KVM_SET_CPUID Capability: basic @@ -494,6 +521,7 @@ struct kvm_cpuid { struct kvm_cpuid_entry entries[0]; }; + 4.21 KVM_SET_SIGNAL_MASK Capability: basic @@ -516,6 +544,7 @@ struct kvm_signal_mask { __u8 sigset[0]; }; + 4.22 KVM_GET_FPU Capability: basic @@ -541,6 +570,7 @@ struct kvm_fpu { __u32 pad2; }; + 4.23 KVM_SET_FPU Capability: basic @@ -566,6 +596,7 @@ struct kvm_fpu { __u32 pad2; }; + 4.24 KVM_CREATE_IRQCHIP Capability: KVM_CAP_IRQCHIP @@ -579,6 +610,7 @@ ioapic, a virtual PIC (two PICs, nested), and sets up future vcpus to have a local APIC. IRQ routing for GSIs 0-15 is set to both PIC and IOAPIC; GSI 16-23 only go to the IOAPIC. On ia64, a IOSAPIC is created. + 4.25 KVM_IRQ_LINE Capability: KVM_CAP_IRQCHIP @@ -600,6 +632,7 @@ struct kvm_irq_level { __u32 level; /* 0 or 1 */ }; + 4.26 KVM_GET_IRQCHIP Capability: KVM_CAP_IRQCHIP @@ -621,6 +654,7 @@ struct kvm_irqchip { } chip; }; + 4.27 KVM_SET_IRQCHIP Capability: KVM_CAP_IRQCHIP @@ -642,6 +676,7 @@ struct kvm_irqchip { } chip; }; + 4.28 KVM_XEN_HVM_CONFIG Capability: KVM_CAP_XEN_HVM @@ -666,6 +701,7 @@ struct kvm_xen_hvm_config { __u8 pad2[30]; }; + 4.29 KVM_GET_CLOCK Capability: KVM_CAP_ADJUST_CLOCK @@ -684,6 +720,7 @@ struct kvm_clock_data { __u32 pad[9]; }; + 4.30 KVM_SET_CLOCK Capability: KVM_CAP_ADJUST_CLOCK @@ -702,6 +739,7 @@ struct kvm_clock_data { __u32 pad[9]; }; + 4.31 KVM_GET_VCPU_EVENTS Capability: KVM_CAP_VCPU_EVENTS @@ -741,6 +779,7 @@ struct kvm_vcpu_events { KVM_VCPUEVENT_VALID_SHADOW may be set in the flags field to signal that interrupt.shadow contains a valid state. Otherwise, this field is undefined. + 4.32 KVM_SET_VCPU_EVENTS Capability: KVM_CAP_VCPU_EVENTS @@ -767,6 +806,7 @@ If KVM_CAP_INTR_SHADOW is available, KVM_VCPUEVENT_VALID_SHADOW can be set in the flags field to signal that interrupt.shadow contains a valid state and shall be written into the VCPU. + 4.33 KVM_GET_DEBUGREGS Capability: KVM_CAP_DEBUGREGS @@ -785,6 +825,7 @@ struct kvm_debugregs { __u64 reserved[9]; }; + 4.34 KVM_SET_DEBUGREGS Capability: KVM_CAP_DEBUGREGS @@ -798,6 +839,7 @@ Writes debug registers into the vcpu. See KVM_GET_DEBUGREGS for the data structure. The flags field is unused yet and must be cleared on entry. + 4.35 KVM_SET_USER_MEMORY_REGION Capability: KVM_CAP_USER_MEM @@ -844,6 +886,7 @@ It is recommended to use this API instead of the KVM_SET_MEMORY_REGION ioctl. The KVM_SET_MEMORY_REGION does not allow fine grained control over memory allocation and is deprecated. + 4.36 KVM_SET_TSS_ADDR Capability: KVM_CAP_SET_TSS_ADDR @@ -862,6 +905,7 @@ This ioctl is required on Intel-based hosts. This is needed on Intel hardware because of a quirk in the virtualization implementation (see the internals documentation when it pops into existence). + 4.37 KVM_ENABLE_CAP Capability: KVM_CAP_ENABLE_CAP @@ -897,6 +941,7 @@ function properly, this is the place to put them. __u8 pad[64]; }; + 4.38 KVM_GET_MP_STATE Capability: KVM_CAP_MP_STATE @@ -927,6 +972,7 @@ Possible values are: This ioctl is only useful after KVM_CREATE_IRQCHIP. Without an in-kernel irqchip, the multiprocessing state must be maintained by userspace. + 4.39 KVM_SET_MP_STATE Capability: KVM_CAP_MP_STATE @@ -941,6 +987,7 @@ arguments. This ioctl is only useful after KVM_CREATE_IRQCHIP. Without an in-kernel irqchip, the multiprocessing state must be maintained by userspace. + 4.40 KVM_SET_IDENTITY_MAP_ADDR Capability: KVM_CAP_SET_IDENTITY_MAP_ADDR @@ -959,6 +1006,7 @@ This ioctl is required on Intel-based hosts. This is needed on Intel hardware because of a quirk in the virtualization implementation (see the internals documentation when it pops into existence). + 4.41 KVM_SET_BOOT_CPU_ID Capability: KVM_CAP_SET_BOOT_CPU_ID @@ -971,6 +1019,7 @@ Define which vcpu is the Bootstrap Processor (BSP). Values are the same as the vcpu id in KVM_CREATE_VCPU. If this ioctl is not called, the default is vcpu 0. + 4.42 KVM_GET_XSAVE Capability: KVM_CAP_XSAVE @@ -985,6 +1034,7 @@ struct kvm_xsave { This ioctl would copy current vcpu's xsave struct to the userspace. + 4.43 KVM_SET_XSAVE Capability: KVM_CAP_XSAVE @@ -999,6 +1049,7 @@ struct kvm_xsave { This ioctl would copy userspace's xsave struct to the kernel. + 4.44 KVM_GET_XCRS Capability: KVM_CAP_XCRS @@ -1022,6 +1073,7 @@ struct kvm_xcrs { This ioctl would copy current vcpu's xcrs to the userspace. + 4.45 KVM_SET_XCRS Capability: KVM_CAP_XCRS @@ -1045,6 +1097,7 @@ struct kvm_xcrs { This ioctl would set vcpu's xcr to the value userspace specified. + 4.46 KVM_GET_SUPPORTED_CPUID Capability: KVM_CAP_EXT_CPUID @@ -1119,6 +1172,7 @@ support. Instead it is reported via if that returns true and you use KVM_CREATE_IRQCHIP, or if you emulate the feature in userspace, then you can enable the feature for KVM_SET_CPUID2. + 4.47 KVM_PPC_GET_PVINFO Capability: KVM_CAP_PPC_GET_PVINFO @@ -1142,6 +1196,7 @@ of 4 instructions that make up a hypercall. If any additional field gets added to this structure later on, a bit for that additional piece of information will be set in the flags bitmap. + 4.48 KVM_ASSIGN_PCI_DEVICE Capability: KVM_CAP_DEVICE_ASSIGNMENT @@ -1185,6 +1240,7 @@ Only PCI header type 0 devices with PCI BAR resources are supported by device assignment. The user requesting this ioctl must have read/write access to the PCI sysfs resource files associated with the device. + 4.49 KVM_DEASSIGN_PCI_DEVICE Capability: KVM_CAP_DEVICE_DEASSIGNMENT @@ -1198,6 +1254,7 @@ Ends PCI device assignment, releasing all associated resources. See KVM_CAP_DEVICE_ASSIGNMENT for the data structure. Only assigned_dev_id is used in kvm_assigned_pci_dev to identify the device. + 4.50 KVM_ASSIGN_DEV_IRQ Capability: KVM_CAP_ASSIGN_DEV_IRQ @@ -1231,6 +1288,7 @@ The following flags are defined: It is not valid to specify multiple types per host or guest IRQ. However, the IRQ type of host and guest can differ or can even be null. + 4.51 KVM_DEASSIGN_DEV_IRQ Capability: KVM_CAP_ASSIGN_DEV_IRQ @@ -1245,6 +1303,7 @@ See KVM_ASSIGN_DEV_IRQ for the data structure. The target device is specified by assigned_dev_id, flags must correspond to the IRQ type specified on KVM_ASSIGN_DEV_IRQ. Partial deassignment of host or guest IRQ is allowed. + 4.52 KVM_SET_GSI_ROUTING Capability: KVM_CAP_IRQ_ROUTING @@ -1293,6 +1352,7 @@ struct kvm_irq_routing_msi { __u32 pad; }; + 4.53 KVM_ASSIGN_SET_MSIX_NR Capability: KVM_CAP_DEVICE_MSIX @@ -1314,6 +1374,7 @@ struct kvm_assigned_msix_nr { #define KVM_MAX_MSIX_PER_DEV 256 + 4.54 KVM_ASSIGN_SET_MSIX_ENTRY Capability: KVM_CAP_DEVICE_MSIX @@ -1332,7 +1393,8 @@ struct kvm_assigned_msix_entry { __u16 padding[3]; }; -4.54 KVM_SET_TSC_KHZ + +4.55 KVM_SET_TSC_KHZ Capability: KVM_CAP_TSC_CONTROL Architectures: x86 @@ -1343,7 +1405,8 @@ Returns: 0 on success, -1 on error Specifies the tsc frequency for the virtual machine. The unit of the frequency is KHz. -4.55 KVM_GET_TSC_KHZ + +4.56 KVM_GET_TSC_KHZ Capability: KVM_CAP_GET_TSC_KHZ Architectures: x86 @@ -1355,7 +1418,8 @@ Returns the tsc frequency of the guest. The unit of the return value is KHz. If the host has unstable tsc this ioctl returns -EIO instead as an error. -4.56 KVM_GET_LAPIC + +4.57 KVM_GET_LAPIC Capability: KVM_CAP_IRQCHIP Architectures: x86 @@ -1371,7 +1435,8 @@ struct kvm_lapic_state { Reads the Local APIC registers and copies them into the input argument. The data format and layout are the same as documented in the architecture manual. -4.57 KVM_SET_LAPIC + +4.58 KVM_SET_LAPIC Capability: KVM_CAP_IRQCHIP Architectures: x86 @@ -1387,7 +1452,8 @@ struct kvm_lapic_state { Copies the input argument into the the Local APIC registers. The data format and layout are the same as documented in the architecture manual. -4.58 KVM_IOEVENTFD + +4.59 KVM_IOEVENTFD Capability: KVM_CAP_IOEVENTFD Architectures: all @@ -1417,7 +1483,8 @@ The following flags are defined: If datamatch flag is set, the event will be signaled only if the written value to the registered address is equal to datamatch in struct kvm_ioeventfd. -4.59 KVM_DIRTY_TLB + +4.60 KVM_DIRTY_TLB Capability: KVM_CAP_SW_TLB Architectures: ppc @@ -1449,7 +1516,8 @@ The "num_dirty" field is a performance hint for KVM to determine whether it should skip processing the bitmap and just invalidate everything. It must be set to the number of set bits in the bitmap. -4.60 KVM_ASSIGN_SET_INTX_MASK + +4.61 KVM_ASSIGN_SET_INTX_MASK Capability: KVM_CAP_PCI_2_3 Architectures: x86 @@ -1482,6 +1550,7 @@ See KVM_ASSIGN_DEV_IRQ for the data structure. The target device is specified by assigned_dev_id. In the flags field, only KVM_DEV_ASSIGN_MASK_INTX is evaluated. + 4.62 KVM_CREATE_SPAPR_TCE Capability: KVM_CAP_SPAPR_TCE @@ -1517,6 +1586,7 @@ the entries written by kernel-handled H_PUT_TCE calls, and also lets userspace update the TCE table directly which is useful in some circumstances. + 4.63 KVM_ALLOCATE_RMA Capability: KVM_CAP_PPC_RMA @@ -1549,6 +1619,7 @@ is supported; 2 if the processor requires all virtual machines to have an RMA, or 1 if the processor can use an RMA but doesn't require it, because it supports the Virtual RMA (VRMA) facility. + 4.64 KVM_NMI Capability: KVM_CAP_USER_NMI @@ -1574,6 +1645,7 @@ following algorithm: Some guests configure the LINT1 NMI input to cause a panic, aiding in debugging. + 4.65 KVM_S390_UCAS_MAP Capability: KVM_CAP_S390_UCONTROL @@ -1593,6 +1665,7 @@ This ioctl maps the memory at "user_addr" with the length "length" to the vcpu's address space starting at "vcpu_addr". All parameters need to be alligned by 1 megabyte. + 4.66 KVM_S390_UCAS_UNMAP Capability: KVM_CAP_S390_UCONTROL @@ -1612,6 +1685,7 @@ This ioctl unmaps the memory in the vcpu's address space starting at "vcpu_addr" with the length "length". The field "user_addr" is ignored. All parameters need to be alligned by 1 megabyte. + 4.67 KVM_S390_VCPU_FAULT Capability: KVM_CAP_S390_UCONTROL @@ -1628,6 +1702,7 @@ table upfront. This is useful to handle validity intercepts for user controlled virtual machines to fault in the virtual cpu's lowcore pages prior to calling the KVM_RUN ioctl. + 4.68 KVM_SET_ONE_REG Capability: KVM_CAP_ONE_REG @@ -1653,6 +1728,7 @@ registers, find a list below: | | PPC | KVM_REG_PPC_HIOR | 64 + 4.69 KVM_GET_ONE_REG Capability: KVM_CAP_ONE_REG @@ -1669,7 +1745,193 @@ at the memory location pointed to by "addr". The list of registers accessible using this interface is identical to the list in 4.64. + +4.70 KVM_KVMCLOCK_CTRL + +Capability: KVM_CAP_KVMCLOCK_CTRL +Architectures: Any that implement pvclocks (currently x86 only) +Type: vcpu ioctl +Parameters: None +Returns: 0 on success, -1 on error + +This signals to the host kernel that the specified guest is being paused by +userspace. The host will set a flag in the pvclock structure that is checked +from the soft lockup watchdog. The flag is part of the pvclock structure that +is shared between guest and host, specifically the second bit of the flags +field of the pvclock_vcpu_time_info structure. It will be set exclusively by +the host and read/cleared exclusively by the guest. The guest operation of +checking and clearing the flag must an atomic operation so +load-link/store-conditional, or equivalent must be used. There are two cases +where the guest will clear the flag: when the soft lockup watchdog timer resets +itself or when a soft lockup is detected. This ioctl can be called any time +after pausing the vcpu, but before it is resumed. + + +4.71 KVM_SIGNAL_MSI + +Capability: KVM_CAP_SIGNAL_MSI +Architectures: x86 +Type: vm ioctl +Parameters: struct kvm_msi (in) +Returns: >0 on delivery, 0 if guest blocked the MSI, and -1 on error + +Directly inject a MSI message. Only valid with in-kernel irqchip that handles +MSI messages. + +struct kvm_msi { + __u32 address_lo; + __u32 address_hi; + __u32 data; + __u32 flags; + __u8 pad[16]; +}; + +No flags are defined so far. The corresponding field must be 0. + + +4.71 KVM_CREATE_PIT2 + +Capability: KVM_CAP_PIT2 +Architectures: x86 +Type: vm ioctl +Parameters: struct kvm_pit_config (in) +Returns: 0 on success, -1 on error + +Creates an in-kernel device model for the i8254 PIT. This call is only valid +after enabling in-kernel irqchip support via KVM_CREATE_IRQCHIP. The following +parameters have to be passed: + +struct kvm_pit_config { + __u32 flags; + __u32 pad[15]; +}; + +Valid flags are: + +#define KVM_PIT_SPEAKER_DUMMY 1 /* emulate speaker port stub */ + +PIT timer interrupts may use a per-VM kernel thread for injection. If it +exists, this thread will have a name of the following pattern: + +kvm-pit/<owner-process-pid> + +When running a guest with elevated priorities, the scheduling parameters of +this thread may have to be adjusted accordingly. + +This IOCTL replaces the obsolete KVM_CREATE_PIT. + + +4.72 KVM_GET_PIT2 + +Capability: KVM_CAP_PIT_STATE2 +Architectures: x86 +Type: vm ioctl +Parameters: struct kvm_pit_state2 (out) +Returns: 0 on success, -1 on error + +Retrieves the state of the in-kernel PIT model. Only valid after +KVM_CREATE_PIT2. The state is returned in the following structure: + +struct kvm_pit_state2 { + struct kvm_pit_channel_state channels[3]; + __u32 flags; + __u32 reserved[9]; +}; + +Valid flags are: + +/* disable PIT in HPET legacy mode */ +#define KVM_PIT_FLAGS_HPET_LEGACY 0x00000001 + +This IOCTL replaces the obsolete KVM_GET_PIT. + + +4.73 KVM_SET_PIT2 + +Capability: KVM_CAP_PIT_STATE2 +Architectures: x86 +Type: vm ioctl +Parameters: struct kvm_pit_state2 (in) +Returns: 0 on success, -1 on error + +Sets the state of the in-kernel PIT model. Only valid after KVM_CREATE_PIT2. +See KVM_GET_PIT2 for details on struct kvm_pit_state2. + +This IOCTL replaces the obsolete KVM_SET_PIT. + + +4.74 KVM_PPC_GET_SMMU_INFO + +Capability: KVM_CAP_PPC_GET_SMMU_INFO +Architectures: powerpc +Type: vm ioctl +Parameters: None +Returns: 0 on success, -1 on error + +This populates and returns a structure describing the features of +the "Server" class MMU emulation supported by KVM. +This can in turn be used by userspace to generate the appropariate +device-tree properties for the guest operating system. + +The structure contains some global informations, followed by an +array of supported segment page sizes: + + struct kvm_ppc_smmu_info { + __u64 flags; + __u32 slb_size; + __u32 pad; + struct kvm_ppc_one_seg_page_size sps[KVM_PPC_PAGE_SIZES_MAX_SZ]; + }; + +The supported flags are: + + - KVM_PPC_PAGE_SIZES_REAL: + When that flag is set, guest page sizes must "fit" the backing + store page sizes. When not set, any page size in the list can + be used regardless of how they are backed by userspace. + + - KVM_PPC_1T_SEGMENTS + The emulated MMU supports 1T segments in addition to the + standard 256M ones. + +The "slb_size" field indicates how many SLB entries are supported + +The "sps" array contains 8 entries indicating the supported base +page sizes for a segment in increasing order. Each entry is defined +as follow: + + struct kvm_ppc_one_seg_page_size { + __u32 page_shift; /* Base page shift of segment (or 0) */ + __u32 slb_enc; /* SLB encoding for BookS */ + struct kvm_ppc_one_page_size enc[KVM_PPC_PAGE_SIZES_MAX_SZ]; + }; + +An entry with a "page_shift" of 0 is unused. Because the array is +organized in increasing order, a lookup can stop when encoutering +such an entry. + +The "slb_enc" field provides the encoding to use in the SLB for the +page size. The bits are in positions such as the value can directly +be OR'ed into the "vsid" argument of the slbmte instruction. + +The "enc" array is a list which for each of those segment base page +size provides the list of supported actual page sizes (which can be +only larger or equal to the base page size), along with the +corresponding encoding in the hash PTE. Similarily, the array is +8 entries sorted by increasing sizes and an entry with a "0" shift +is an empty entry and a terminator: + + struct kvm_ppc_one_page_size { + __u32 page_shift; /* Page shift (or 0) */ + __u32 pte_enc; /* Encoding in the HPTE (>>12) */ + }; + +The "pte_enc" field provides a value that can OR'ed into the hash +PTE's RPN field (ie, it needs to be shifted left by 12 to OR it +into the hash PTE second double word). + 5. The kvm_run structure +------------------------ Application code obtains a pointer to the kvm_run structure by mmap()ing a vcpu fd. From that point, application code can control @@ -1910,7 +2172,9 @@ and usually define the validity of a groups of registers. (e.g. one bit }; + 6. Capabilities that can be enabled +----------------------------------- There are certain capabilities that change the behavior of the virtual CPU when enabled. To enable them, please see section 4.37. Below you can find a list of @@ -1926,6 +2190,7 @@ The following information is provided along with the description: Returns: the return value. General error numbers (EBADF, ENOMEM, EINVAL) are not detailed, but errors with specific meanings are. + 6.1 KVM_CAP_PPC_OSI Architectures: ppc @@ -1939,6 +2204,7 @@ between the guest and the host. When this capability is enabled, KVM_EXIT_OSI can occur. + 6.2 KVM_CAP_PPC_PAPR Architectures: ppc @@ -1957,6 +2223,7 @@ HTAB invisible to the guest. When this capability is enabled, KVM_EXIT_PAPR_HCALL can occur. + 6.3 KVM_CAP_SW_TLB Architectures: ppc diff --git a/Documentation/virtual/kvm/cpuid.txt b/Documentation/virtual/kvm/cpuid.txt index 882068538c9c..83afe65d4966 100644 --- a/Documentation/virtual/kvm/cpuid.txt +++ b/Documentation/virtual/kvm/cpuid.txt @@ -10,11 +10,15 @@ a guest. KVM cpuid functions are: function: KVM_CPUID_SIGNATURE (0x40000000) -returns : eax = 0, +returns : eax = 0x40000001, ebx = 0x4b4d564b, ecx = 0x564b4d56, edx = 0x4d. Note that this value in ebx, ecx and edx corresponds to the string "KVMKVMKVM". +The value in eax corresponds to the maximum cpuid function present in this leaf, +and will be updated if more functions are added in the future. +Note also that old hosts set eax value to 0x0. This should +be interpreted as if the value was 0x40000001. This function queries the presence of KVM cpuid leafs. diff --git a/Documentation/virtual/kvm/msr.txt b/Documentation/virtual/kvm/msr.txt index 50317809113d..96b41bd97523 100644 --- a/Documentation/virtual/kvm/msr.txt +++ b/Documentation/virtual/kvm/msr.txt @@ -109,6 +109,10 @@ MSR_KVM_SYSTEM_TIME_NEW: 0x4b564d01 0 | 24 | multiple cpus are guaranteed to | | be monotonic ------------------------------------------------------------- + | | guest vcpu has been paused by + 1 | N/A | the host + | | See 4.70 in api.txt + ------------------------------------------------------------- Availability of this MSR must be checked via bit 3 in 0x4000001 cpuid leaf prior to usage. diff --git a/Documentation/vm/pagemap.txt b/Documentation/vm/pagemap.txt index 4600cbe3d6be..7587493c67f1 100644 --- a/Documentation/vm/pagemap.txt +++ b/Documentation/vm/pagemap.txt @@ -16,7 +16,7 @@ There are three components to pagemap: * Bits 0-4 swap type if swapped * Bits 5-54 swap offset if swapped * Bits 55-60 page shift (page size = 1<<page shift) - * Bit 61 reserved for future use + * Bit 61 page is file-page or shared-anon * Bit 62 page swapped * Bit 63 page present diff --git a/Documentation/vm/slub.txt b/Documentation/vm/slub.txt index 6752870c4970..b0c6d1bbb434 100644 --- a/Documentation/vm/slub.txt +++ b/Documentation/vm/slub.txt @@ -17,7 +17,7 @@ data and perform operation on the slabs. By default slabinfo only lists slabs that have data in them. See "slabinfo -h" for more options when running the command. slabinfo can be compiled with -gcc -o slabinfo tools/slub/slabinfo.c +gcc -o slabinfo tools/vm/slabinfo.c Some of the modes of operation of slabinfo require that slub debugging be enabled on the command line. F.e. no tracking information will be diff --git a/Documentation/vm/transhuge.txt b/Documentation/vm/transhuge.txt index 29bdf62aac09..f734bb2a78dc 100644 --- a/Documentation/vm/transhuge.txt +++ b/Documentation/vm/transhuge.txt @@ -166,6 +166,68 @@ behavior. So to make them effective you need to restart any application that could have been using hugepages. This also applies to the regions registered in khugepaged. +== Monitoring usage == + +The number of transparent huge pages currently used by the system is +available by reading the AnonHugePages field in /proc/meminfo. To +identify what applications are using transparent huge pages, it is +necessary to read /proc/PID/smaps and count the AnonHugePages fields +for each mapping. Note that reading the smaps file is expensive and +reading it frequently will incur overhead. + +There are a number of counters in /proc/vmstat that may be used to +monitor how successfully the system is providing huge pages for use. + +thp_fault_alloc is incremented every time a huge page is successfully + allocated to handle a page fault. This applies to both the + first time a page is faulted and for COW faults. + +thp_collapse_alloc is incremented by khugepaged when it has found + a range of pages to collapse into one huge page and has + successfully allocated a new huge page to store the data. + +thp_fault_fallback is incremented if a page fault fails to allocate + a huge page and instead falls back to using small pages. + +thp_collapse_alloc_failed is incremented if khugepaged found a range + of pages that should be collapsed into one huge page but failed + the allocation. + +thp_split is incremented every time a huge page is split into base + pages. This can happen for a variety of reasons but a common + reason is that a huge page is old and is being reclaimed. + +As the system ages, allocating huge pages may be expensive as the +system uses memory compaction to copy data around memory to free a +huge page for use. There are some counters in /proc/vmstat to help +monitor this overhead. + +compact_stall is incremented every time a process stalls to run + memory compaction so that a huge page is free for use. + +compact_success is incremented if the system compacted memory and + freed a huge page for use. + +compact_fail is incremented if the system tries to compact memory + but failed. + +compact_pages_moved is incremented each time a page is moved. If + this value is increasing rapidly, it implies that the system + is copying a lot of data to satisfy the huge page allocation. + It is possible that the cost of copying exceeds any savings + from reduced TLB misses. + +compact_pagemigrate_failed is incremented when the underlying mechanism + for moving a page failed. + +compact_blocks_moved is incremented each time memory compaction examines + a huge page aligned range of pages. + +It is possible to establish how long the stalls were using the function +tracer to record how long was spent in __alloc_pages_nodemask and +using the mm_page_alloc tracepoint to identify which allocations were +for huge pages. + == get_user_pages and follow_page == get_user_pages and follow_page if run on a hugepage, will return the diff --git a/Documentation/watchdog/watchdog-kernel-api.txt b/Documentation/watchdog/watchdog-kernel-api.txt index 25fe4304f2fc..086638f6c82d 100644 --- a/Documentation/watchdog/watchdog-kernel-api.txt +++ b/Documentation/watchdog/watchdog-kernel-api.txt @@ -1,6 +1,6 @@ The Linux WatchDog Timer Driver Core kernel API. =============================================== -Last reviewed: 16-Mar-2012 +Last reviewed: 22-May-2012 Wim Van Sebroeck <wim@iguana.be> @@ -39,6 +39,10 @@ watchdog_device structure. The watchdog device structure looks like this: struct watchdog_device { + int id; + struct cdev cdev; + struct device *dev; + struct device *parent; const struct watchdog_info *info; const struct watchdog_ops *ops; unsigned int bootstatus; @@ -46,10 +50,20 @@ struct watchdog_device { unsigned int min_timeout; unsigned int max_timeout; void *driver_data; + struct mutex lock; unsigned long status; }; It contains following fields: +* id: set by watchdog_register_device, id 0 is special. It has both a + /dev/watchdog0 cdev (dynamic major, minor 0) as well as the old + /dev/watchdog miscdev. The id is set automatically when calling + watchdog_register_device. +* cdev: cdev for the dynamic /dev/watchdog<id> device nodes. This + field is also populated by watchdog_register_device. +* dev: device under the watchdog class (created by watchdog_register_device). +* parent: set this to the parent device (or NULL) before calling + watchdog_register_device. * info: a pointer to a watchdog_info structure. This structure gives some additional information about the watchdog timer itself. (Like it's unique name) * ops: a pointer to the list of watchdog operations that the watchdog supports. @@ -61,6 +75,7 @@ It contains following fields: * driver_data: a pointer to the drivers private data of a watchdog device. This data should only be accessed via the watchdog_set_drvdata and watchdog_get_drvdata routines. +* lock: Mutex for WatchDog Timer Driver Core internal use only. * status: this field contains a number of status bits that give extra information about the status of the device (Like: is the watchdog timer running/active, is the nowayout bit set, is the device opened via @@ -78,6 +93,8 @@ struct watchdog_ops { unsigned int (*status)(struct watchdog_device *); int (*set_timeout)(struct watchdog_device *, unsigned int); unsigned int (*get_timeleft)(struct watchdog_device *); + void (*ref)(struct watchdog_device *); + void (*unref)(struct watchdog_device *); long (*ioctl)(struct watchdog_device *, unsigned int, unsigned long); }; @@ -85,6 +102,21 @@ It is important that you first define the module owner of the watchdog timer driver's operations. This module owner will be used to lock the module when the watchdog is active. (This to avoid a system crash when you unload the module and /dev/watchdog is still open). + +If the watchdog_device struct is dynamically allocated, just locking the module +is not enough and a driver also needs to define the ref and unref operations to +ensure the structure holding the watchdog_device does not go away. + +The simplest (and usually sufficient) implementation of this is to: +1) Add a kref struct to the same structure which is holding the watchdog_device +2) Define a release callback for the kref which frees the struct holding both +3) Call kref_init on this kref *before* calling watchdog_register_device() +4) Define a ref operation calling kref_get on this kref +5) Define a unref operation calling kref_put on this kref +6) When it is time to cleanup: + * Do not kfree() the struct holding both, the last kref_put will do this! + * *After* calling watchdog_unregister_device() call kref_put on the kref + Some operations are mandatory and some are optional. The mandatory operations are: * start: this is a pointer to the routine that starts the watchdog timer @@ -125,6 +157,10 @@ they are supported. These optional routines/operations are: (Note: the WDIOF_SETTIMEOUT needs to be set in the options field of the watchdog's info structure). * get_timeleft: this routines returns the time that's left before a reset. +* ref: the operation that calls kref_get on the kref of a dynamically + allocated watchdog_device struct. +* unref: the operation that calls kref_put on the kref of a dynamically + allocated watchdog_device struct. * ioctl: if this routine is present then it will be called first before we do our own internal ioctl call handling. This routine should return -ENOIOCTLCMD if a command is not supported. The parameters that are passed to the ioctl @@ -144,6 +180,11 @@ bit-operations. The status bits that are defined are: (This bit should only be used by the WatchDog Timer Driver Core). * WDOG_NO_WAY_OUT: this bit stores the nowayout setting for the watchdog. If this bit is set then the watchdog timer will not be able to stop. +* WDOG_UNREGISTERED: this bit gets set by the WatchDog Timer Driver Core + after calling watchdog_unregister_device, and then checked before calling + any watchdog_ops, so that you can be sure that no operations (other then + unref) will get called after unregister, even if userspace still holds a + reference to /dev/watchdog To set the WDOG_NO_WAY_OUT status bit (before registering your watchdog timer device) you can either: diff --git a/Documentation/watchdog/watchdog-parameters.txt b/Documentation/watchdog/watchdog-parameters.txt index 17ddd822b456..04fddbacdbde 100644 --- a/Documentation/watchdog/watchdog-parameters.txt +++ b/Documentation/watchdog/watchdog-parameters.txt @@ -78,6 +78,11 @@ wd0_timeout: Default watchdog0 timeout in 1/10secs wd1_timeout: Default watchdog1 timeout in 1/10secs wd2_timeout: Default watchdog2 timeout in 1/10secs ------------------------------------------------- +da9052wdt: +timeout: Watchdog timeout in seconds. 2<= timeout <=131, default=2.048s +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- davinci_wdt: heartbeat: Watchdog heartbeat period in seconds from 1 to 600, default 60 ------------------------------------------------- diff --git a/Documentation/x86/efi-stub.txt b/Documentation/x86/efi-stub.txt new file mode 100644 index 000000000000..44e6bb6ead10 --- /dev/null +++ b/Documentation/x86/efi-stub.txt @@ -0,0 +1,65 @@ + The EFI Boot Stub + --------------------------- + +On the x86 platform, a bzImage can masquerade as a PE/COFF image, +thereby convincing EFI firmware loaders to load it as an EFI +executable. The code that modifies the bzImage header, along with the +EFI-specific entry point that the firmware loader jumps to are +collectively known as the "EFI boot stub", and live in +arch/x86/boot/header.S and arch/x86/boot/compressed/eboot.c, +respectively. + +By using the EFI boot stub it's possible to boot a Linux kernel +without the use of a conventional EFI boot loader, such as grub or +elilo. Since the EFI boot stub performs the jobs of a boot loader, in +a certain sense it *IS* the boot loader. + +The EFI boot stub is enabled with the CONFIG_EFI_STUB kernel option. + + +**** How to install bzImage.efi + +The bzImage located in arch/x86/boot/bzImage must be copied to the EFI +System Partiion (ESP) and renamed with the extension ".efi". Without +the extension the EFI firmware loader will refuse to execute it. It's +not possible to execute bzImage.efi from the usual Linux file systems +because EFI firmware doesn't have support for them. + + +**** Passing kernel parameters from the EFI shell + +Arguments to the kernel can be passed after bzImage.efi, e.g. + + fs0:> bzImage.efi console=ttyS0 root=/dev/sda4 + + +**** The "initrd=" option + +Like most boot loaders, the EFI stub allows the user to specify +multiple initrd files using the "initrd=" option. This is the only EFI +stub-specific command line parameter, everything else is passed to the +kernel when it boots. + +The path to the initrd file must be an absolute path from the +beginning of the ESP, relative path names do not work. Also, the path +is an EFI-style path and directory elements must be separated with +backslashes (\). For example, given the following directory layout, + +fs0:> + Kernels\ + bzImage.efi + initrd-large.img + + Ramdisks\ + initrd-small.img + initrd-medium.img + +to boot with the initrd-large.img file if the current working +directory is fs0:\Kernels, the following command must be used, + + fs0:\Kernels> bzImage.efi initrd=\Kernels\initrd-large.img + +Notice how bzImage.efi can be specified with a relative path. That's +because the image we're executing is interpreted by the EFI shell, +which understands relative paths, whereas the rest of the command line +is passed to bzImage.efi. |